NSF Product and Service Listings

These NSF Official Listings are current as of Wednesday, February 5, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/DWTU/Listings.asp?TradeName=hf20%2Di&

Note: Certain claims, such as Arsenic (Pentavalent) Reduction, appear as active links, allowing you to access additional information regarding the specific contaminants.

NSF/ANSI 42
Drinking Water Treatment Units - Aesthetic Effects

 
Solventum Purification Inc. 
400 Research Parkway
Meriden, CT 06450 
United States 
800-222-7880 
651 737 1374
Visit this company's website

Facility : New Ulm, MN

  Replacement Service Cycle Flow Rate  
Brand Name / Trade Name / Model Element (gallons) (gpm)   Claim

Commercial Modular
High Flow Series[3] [4] [5] HF20-I 14,000(1) 1.67   Chlorine Reduction
Taste and Odor Reduction
Nominal Particulate Reduction, Class I
High Flow Series BEV[7] HF20-I 14,000(1) 1.67   Chlorine Reduction
Taste and Odor Reduction
Nominal Particulate Reduction, Class I

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] Available with the VH3 series heads (as molded, with plug or with gauge).
[3] Available with the HN3, NH3, or VH3 series heads (as molded, with plug or with gauge).
    (1) Indicates approved for use with the High Flow Series Triple Manifold.
    (2) Indicates approved for use with the High Flow Series DF1XX Manifold.
    (3) Indicates approved for use with the High Flow Series Twin Manifold.
    (4) Indicates approved for use with the High Flow Series DF2XX Manifold.
    (5) Indicates approved for use with the High Flow Series DP1XX Manifold.
    (6) Indicates approved for use with the High Flow Series DP2XX Manifold.
    (7) Indicates approved for use with the High Flow Series DP3XX Manifold.
    (8) Indicates approved for use with the High Flow Series SF1XX Manifold.
    (9) Indicates approved for use with the High Flow Series DIDF2XX Manifold.
    (10) Indicates approved for use with the High Flow Series DIDF1XX Manifold.
    (11) Indicates approved for use with the High Flow Series DPP3XX Manifold.
    (12) Indicates approved for use with the High Flow Series HFP3XX Manifold.
[4] SH-EXP can be used with any of the following: High Flow Series Manifolds, the High Flow
    Series Triple, DF1XX, Twin, DF2XX, DP1XX, DP2XX, DP3XX, or SF1XX Manifold.
[5] HF190-SR can be used with the DP3XX Manifold.
[6] Available with the NH3 or VH3 series heads (as molded, with plug or with gauge).
[7] Available with the NH3, VH3 series heads or High Flow Series Twin Manifold (as molded,
    with plug or with gauge)				
    (1) May be sold as ICE1xx, BEV1xx, or BREW1xx. 				
    (2) May be Sold as ICE2xx, BEV2xx, or BREW2xx.

NSF/ANSI 53
Drinking Water Treatment Units - Health Effects


 
Solventum Purification Inc. 
400 Research Parkway
Meriden, CT 06450 
United States 
800-222-7880 
651 737 1374
Visit this company's website

Facility : New Ulm, MN

  Replacement Service Cycle Flow Rate  
Brand Name / Trade Name / Model Element (gallons) (gpm)   Claim

Commercial Modular
High Flow Series[2] [3] [4] HF20-I (1) 1.67   Cyst Reduction
High Flow Series BEV[6] HF20-I (1) 1.67   Cyst Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] Available with the NH3 or VH3 series heads (as molded, with plug or with gauge).
    (1) Indicates approved for use with the High Flow Series Triple Manifold.
    (2) Indicates approved for use with the High Flow Series DF1XX Manifold.
    (3) Indicates approved for use with the High Flow Series Twin Manifold.
    (4) Indicates approved for use with the High Flow Series DF2XX Manifold.
    (5) Indicates approved for use with the High Flow Series DP1XX Manifold.
    (6) Indicates approved for use with the High Flow Series DP2XX Manifold.
    (7) Indicates approved for use with the High Flow Series DP3XX Manifold.
    (8) Indicates approved for use with the High Flow Series SF1XX Manifold.
    (9) Indicates approved for use with the High Flow Series DIDF2XX Manifold.
    (10) Indicates approved for use with the High Flow Series DIDF1XX Manifold.
    (11) Indicates approved for use with the High Flow Series DPP3XX Manifold.
    (12) Indicates approved for use with the High Flow Series HFP3XX Manifold.
[3] SH-EXP can be used with any of the following: High Flow Series Manifolds, the High Flow
    Series Triple, DF1XX, Twin, DF2XX, DP1XX, DP2XX, DP3XX, or SF1XX Manifold.
    
[4] HF190-SR can be used with the DP3XX Manifold.
[5] Available with the VH3 series heads (as molded, with plug or with gauge).
[6] Available with the NH3, VH3 series heads or High Flow Series Twin Manifold (as molded,
    with plug or with gauge)				
    (1) May be sold as ICE1xx, BEV1xx, or BREW1xx. 				
    (2) May be Sold as ICE2xx, BEV2xx, or BREW2xx. 
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

NSF/ANSI 401
Drinking Water Treatment Units - Emerging Compounds/Incidental Contaminants


 
Solventum Purification Inc. 
400 Research Parkway
Meriden, CT 06450 
United States 
800-222-7880 
651 737 1374
Visit this company's website

Facility : New Ulm, MN

  Replacement Service Cycle Flow Rate  
Brand Name / Trade Name / Model Element (gallons) (gpm)   Claim

Commercial Modular
High Flow Series[3] [4] [5] HF20-I (1) 1.67   Microplastics Reduction
High Flow Series BEV[7] HF20-I (1) 1.67   Microplastics Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] Available with the VH3 series heads (as molded, with plug or with gauge).
[3] Available with the HN3, NH3, or VH3 series heads (as molded, with plug or with gauge).
        (1) Indicates approved for use with the High Flow Series Triple Manifold.
        (2) Indicates approved for use with the High Flow Series DF1XX Manifold.
        (3) Indicates approved for use with the High Flow Series Twin Manifold.
        (4) Indicates approved for use with the High Flow Series DF2XX Manifold.
        (5) Indicates approved for use with the High Flow Series DP1XX Manifold.
        (6) Indicates approved for use with the High Flow Series DP2XX Manifold.
        (7) Indicates approved for use with the High Flow Series DP3XX Manifold.
        (8) Indicates approved for use with the High Flow Series SF1XX Manifold.
        (9) Indicates approved for use with the High Flow Series DIDF2XX Manifold.
        (10) Indicates approved for use with the High Flow Series DIDF1XX Manifold.
        (11) Indicates approved for use with the High Flow Series DPP3XX Manifold.
        (12) Indicates approved for use with the High Flow Series HFP3XX Manifold.
[4] SH-EXP can be used with any of the following: High Flow Series Manifolds, the High Flow
        Series Triple, DF1XX, Twin, DF2XX, DP1XX, DP2XX, DP3XX, or SF1XX Manifold.
[5] HF190-SR can be used with the DP3XX Manifold.
[7] Available with the NH3 or VH3 series heads (as molded, with plug or with gauge).


[6] Available options: 
        (1) 2.1
        (2) 1.7
        (3) 1.0
ASSE 1087
Commercial and Food Service Water Treatment Equipment
Utilizing Drinking Water


 
Solventum Purification Inc. 
400 Research Parkway
Meriden, CT 06450 
United States 
800-222-7880 
651 737 1374
Visit this company's website

Facility : New Ulm, MN


Commercial Modular
High Flow Series / HF20-I[1] [2] [3]  
High Flow Series Bev / HF20-I[6]  

   
[1] SH-EXP can be used with any of the following: High Flow Series Manifolds, the High Flow
    Series Triple, DF1XX, Twin, DF2XX, DP1XX, DP2XX, DP3XX, or SF1XX Manifold.
[2] HF190-SR can be used with the DP3XX Manifold.
[3] Available with the VH3 series heads (as molded, with plug or with gauge).
[4] Available with the NH3 or VH3 series heads (as molded, with plug or with gauge).		
    (1) Indicates approved for use with the High Flow Series Triple Manifold.		
    (2) Indicates approved for use with the High Flow Series DF1XX Manifold.		
    (3) Indicates approved for use with the High Flow Series Twin Manifold.		
    (4) Indicates approved for use with the High Flow Series DF2XX Manifold.		
    (5) Indicates approved for use with the High Flow Series DP1XX Manifold.		
    (6) Indicates approved for use with the High Flow Series DP2XX Manifold.		
    (7) Indicates approved for use with the High Flow Series DP3XX Manifold.		
    (8) Indicates approved for use with the High Flow Series SF1XX Manifold.		
    (9) Indicates approved for use with the High Flow Series DIDF2XX Manifold.		
    (10) Indicates approved for use with the High Flow Series DIDF1XX Manifold.		
    (11) Indicates approved for use with the High Flow Series DPP3XX Manifold.		
    (12) Indicates approved for use with the High Flow Series HFP3XX Manifold.
[5] Available with the NH3, VH3 series heads or High Flow Series Twin Manifold (as molded,
    with plug or with gauge)
[6] Available with the NH3, VH3 series heads or High Flow Series Twin Manifold (as molded,	
    with plug or with gauge)			
    (1) May be sold as ICE1xx, BEV1xx, or BREW1xx.                              			
    (2) May be Sold as ICE2xx, BEV2xx, or BREW2xx.

CSA Standard B483.1
Drinking Water Treatment Systems


 
Solventum Purification Inc. 
400 Research Parkway
Meriden, CT 06450 
United States 
800-222-7880 
651 737 1374
Visit this company's website

Facility : New Ulm, MN

  Replacement Service Cycle Flow Rate  
Brand Name / Trade Name / Model Element (gallons) (gpm)   Claim

Commercial Modular
High Flow Series[3] [4] [5] HF20-I 14,000(1) 1.67   Chlorine Reduction
Taste and Odor Reduction
Nominal Particulate Reduction, Class I
High Flow Series BEV [8] HF20-I 14,000(1) 1.67   Nominal Particulate Reduction, Class I
Chlorine Reduction
Taste and Odor Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] Available with the VH3 series heads (as molded, with plug or with gauge).
[3] Available with the HN3, NH3, or VH3 series heads (as molded, with plug or with gauge).
    (1) Indicates approved for use with the High Flow Series Triple Manifold.
    (2) Indicates approved for use with the High Flow Series DF1XX Manifold.
    (3) Indicates approved for use with the High Flow Series Twin Manifold.
    (4) Indicates approved for use with the High Flow Series DF2XX Manifold.
    (5) Indicates approved for use with the High Flow Series DP1XX Manifold.
    (6) Indicates approved for use with the High Flow Series DP2XX Manifold.
    (7) Indicates approved for use with the High Flow Series DP3XX Manifold.
    (8) Indicates approved for use with the High Flow Series SF1XX Manifold.
    (9) Indicates approved for use with the High Flow Series DIDF2XX Manifold.
    (10) Indicates approved for use with the High Flow Series DIDF1XX Manifold.
    (11) Indicates approved for use with the High Flow Series DPP3XX Manifold.
    (12) Indicates approved for use with the High Flow Series HFP3XX Manifold.
[4] SH-EXP can be used with any of the following: High Flow Series Manifolds, the High Flow
    Series Triple, DF1XX, Twin, DF2XX, DP1XX, DP2XX, DP3XX, or SF1XX Manifold.
[5] HF190-SR can be used with the DP3XX Manifold.
[6] Available options: 
    (1) 2.1
    (2) 1.7
    (3) 1.0
[7] Available with the NH3 or VH3 series heads (as molded, with plug or with gauge).
[8] Available with the NH3, VH3 series heads or High Flow Series Twin Manifold (as molded,
    with plug or with gauge)					
    (1) May be sold as ICE1xx, BEV1xx, or BREW1xx 					
    (2) May be Sold as ICE2xx, BEV2xx, or BREW2xx		
    					
    


NOTE: All replacement elements are components.
  Replacement Service Cycle Flow Rate  
Brand Name / Trade Name / Model Element (gallons) (gpm)   Claim
High Flow Series[3] [4] [5] HF20-I (1) 1.67   Cyst Reduction
High Flow Series BEV[6] HF20-I (1) 1.67   Cyst Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] Available with the VH3 series heads (as molded, with plug or with gauge).
[3] Available with the NH3 or VH3 series heads (as molded, with plug or with gauge).
    (1) Indicates approved for use with the High Flow Series Triple Manifold.
    (2) Indicates approved for use with the High Flow Series DF1XX Manifold.
    (3) Indicates approved for use with the High Flow Series Twin Manifold.
    (4) Indicates approved for use with the High Flow Series DF2XX Manifold.
    (5) Indicates approved for use with the High Flow Series DP1XX Manifold.
    (6) Indicates approved for use with the High Flow Series DP2XX Manifold.
    (7) Indicates approved for use with the High Flow Series DP3XX Manifold.
    (8) Indicates approved for use with the High Flow Series SF1XX Manifold.
    (9) Indicates approved for use with the High Flow Series DIDF2XX Manifold.
    (10) Indicates approved for use with the High Flow Series DIDF1XX Manifold.
    (11) Indicates approved for use with the High Flow Series DPP3XX Manifold.
    (12) Indicates approved for use with the High Flow Series HFP3XX Manifold.
[4] SH-EXP can be used with any of the following: High Flow Series Manifolds, the High Flow
    Series Triple, DF1XX, Twin, DF2XX, DP1XX, DP2XX, DP3XX, or SF1XX Manifold.
[5] HF190-SR can be used with the DP3XX Manifold.
[6] Available with the NH3, VH3 series heads or High Flow Series Twin Manifold (as molded,
    with plug or with gauge)
    (1) May be sold as ICE1xx, BEV1xx, or BREW1xx. 					
    (2) May be Sold as ICE2xx, BEV2xx, or BREW2xx.


NOTE: All replacement elements are components.
Number of matching Manufacturers is 5
Number of matching Products is 12
Processing time was 0 seconds