NSF Product and Service Listings
These NSF Official Listings are current as of Thursday, January 15, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/food/Listings.asp?Standard=018&Company=16980&
NSF/ANSI 18
Manual Food and Beverage Dispensing Equipment
Manual Food and Beverage Dispensing Equipment
| Flow Control LLC - a Xylem Subsidiary, Irvine | |
| 17942 Cowan | |
| Irvine, CA 92614 | |
| United States | |
| 949-608-3900 |
Facility : # 3 Mexico
|
COMPONENTS: |
|
|
4 Chamber Diaphragm Pump[1] [Pb] |
|
| Q(1)(2)(3)(4)(5)(6)(7)(8)(9)(10)[2] | |
[1] Accepted for Water, acidic, non-acidic, and alcohol contact up to 180°F only.
[2] (1) Double alphabetical or numerical digit indicating Flow rate. All are acceptable.
(2) Single alphabetical or numerical digit indicating voltage/motor data. All are
acceptable.
(3) Single alphabetical or numerical digit indicating labeling for specific market.
F, S & G are acceptable.
(4) Single alphabetical or numerical digit indicating Pump Housing type. 1 is
acceptable.
(5) Single alphabetical or numerical digit indicating Diaph/Valve materials. 1, 2, 3,
4 & 5 are acceptable.
(6) Single alphabetical or numerical digit indicating pressure switch option. All
are acceptable.
(7) Single alphabetical or numerical digit indicating Bypass option. All are
acceptable.
(8) Single alphabetical or numerical digit indicating configurations. All are
acceptable.
(9) Optional Single alphabetical or numerical digit indicating Packaging. All are
acceptable.
(10) Optional Double alphabetical or numerical digit indicating special configs (i.e.
nonstandard motor lengths).
[Pb] Product also evaluated and determined to possess weighted average lead content of
<=0.25% and complies with lead content requirements for “lead free” plumbing as defined
by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
Water Act.
|
|
|
Accumulator Tank[3] [4] [5] |
|
| 3057300(1) | |
[3] Accepted for water contact up to 73°F only. [4] (1) Optional single alpha character indicating type of packaging. [5] Accepted for use with acidic and non-acidic. |
|
|
Booster System[6] |
|
| (1)28(2)(3)(4)(5)(6)(7)[7] | |
[6] Accepted for water contact only.
[7] (1) Single alpha or numerical digit indicating Region. 0 and R are acceptable.
(2) Single numerical digit indicating Pump Type. All NSF certified pumps are
acceptable.
(3) Single numerical digit indicating special characteristics. All are acceptable.
(4) Single numerical digit indicating voltage. All are acceptable.
(5) Single alpha or numerical digit indicating type of controls. All are acceptable
(6) Single numerical digit indicating tank size. 1,2,4 & 6 are acceptable.
(7) Single numerical digit indicating Fittings Configuration. All are acceptable.
|
|
|
Diaphragm Pump for Beverage Contact |
|
| 08(1)(2)1(3)44(4)[8] [9] | |
| 08(1)(2)15(5)(4)[8] [9] | |
| 08(1)(2)16(6)(4)[8] [9] | |
| P(1)(2)(3)(4)(5)(6)(7)(8)(9)(10)[9] [10] | |
| R8(1)(2)1(3)44(4)[8] [9] | |
| R8(1)(2)15(5)(4)[8] [9] | |
| R8(1)(2)16(6)(4)[8] [9] | |
[8] (1) Single digit numerical suffix indicating GPM. All are acceptable.
(2) Single digit numerical suffix indicating switch or bypass type. All are
acceptable.
(3) Single digit numerical suffix indicating voltage. All are acceptable
(4) Optional single digit alpha suffix indicating packaging. All are acceptable
(5) Two-digit numerical suffix indicating special OEM configuration for UL Listed 115
VAC pumps, and which does not affect external design & construction or any wetted
materials.
(6) Two-digit numerical suffix indicating special OEM configuration which does not
affect external design & construction or any wetted materials.
[9] Accepted for contact with acidic & non-acidic and alcohol beverages up to 180°F.
[10] (1) Double alphabetical or numerical digit indicating Flow rate. All are acceptable.
(2) Single alphabetical or numerical digit indicating voltage/motor data. All are
acceptable.
(3) Single alphabetical or numerical digit indicating labeling for specific market.
F, S & G are acceptable.
(4) Single alphabetical or numerical digit indicating Pump Housing type. 1, 2, 3, 4
and A are acceptable.
(5) Single alphabetical or numerical digit indicating Diaphragm/Valve materials. 1,
2, 3, 4 & 5 are acceptable.
(6) Single alphabetical or numerical digit indicating pressure switch option. All
are acceptable.
(7) Single alphabetical or numerical digit indicating Bypass option. All are
acceptable.
(8) Single alphabetical or numerical digit indicating configurations. All are
acceptable.
(9) Optional Single alphabetical or numerical digit indicating Packaging. All are
acceptable.
(10) Optional Double alphabetical or numerical digit indicating special configs.
|
|
|
Diaphragm Pump for Water Contact |
|
| 08(1)(2)0(3)44(4)[8] [11] | |
| 08(1)(2)05(5)(4)[8] [11] | |
| 08(1)(2)06(6)(4)[8] [11] | |
| P(1)(2)(3)(4)(5)(6)(7)(8)(9)(10)[11] [12] | |
| R8(1)(2)0(3)44(4)[8] [11] | |
| R8(1)(2)05(5)(4)[8] [11] | |
| R8(1)(2)06(6)(4)[8] [11] | |
[8] (1) Single digit numerical suffix indicating GPM. All are acceptable.
(2) Single digit numerical suffix indicating switch or bypass type. All are
acceptable.
(3) Single digit numerical suffix indicating voltage. All are acceptable
(4) Optional single digit alpha suffix indicating packaging. All are acceptable
(5) Two-digit numerical suffix indicating special OEM configuration for UL Listed 115
VAC pumps, and which does not affect external design & construction or any wetted
materials.
(6) Two-digit numerical suffix indicating special OEM configuration which does not
affect external design & construction or any wetted materials.
[11] Accepted for cold water contact only.
[12] (1) Double alphabetical or numerical digit indicating Flow rate. All are acceptable.
(2) Single alphabetical or numerical digit indicating voltage/motor data. All are
acceptable.
(3) Single alphabetical or numerical digit indicating labeling for specific market.
F, S & G are acceptable.
(4) Single alphabetical or numerical digit indicating Pump Housing type. 5, 6, 7, 8
and B are acceptable.
(5) Single alphabetical or numerical digit indicating Diaphragm/Valve materials. 1,
2, 3, 4 & 5 are acceptable.
(6) Single alphabetical or numerical digit indicating pressure switch option. All
are acceptable.
(7) Single alphabetical or numerical digit indicating Bypass option. All are
acceptable.
(8) Single alphabetical or numerical digit indicating configurations. All are
acceptable.
(9) Optional Single alphabetical or numerical digit indicating Packaging. All are
acceptable.
(10) Optional Double alphabetical or numerical digit indicating special configs.
|
|
|
Electrical Motor Pump |
|
| 02125-(1)[13] [14] | |
| 02125-(1)3(2)[13] [15] | |
| 02130-(1)[14] [16] | |
| 02130-(1)3(2)[15] [16] | |
| D(1)(2)(3)(4)E(5)(6)(7)(8)(9)(10)[13] [17] | |
| D(1)(2)(3)(4)H(5)(6)(7)(8)(9)(10)[13] [17] | |
| D(1)(2)X(3)(4)(5)[13] [18] | |
| R2125 (1)[13] [14] | |
| R2125 (1)3(2)[13] [15] | |
| R2130 (1)[14] [16] | |
| R2130 (1)3(2)[15] [16] | |
| S2130 (1)[14] [16] | |
| S2130 (1)3(2)[15] [16] | |
[13] Accepted for acidic, non-acidic, and alcohol contact up to 212°F only.
[14] (1) 3-digit numerical suffix that indicates a special pump configuration that does not
affect external design and construction or wetted materials. 500-999 are
acceptable.
[15] (1) 1 digit numerical suffix that indicates voltage. All are acceptable.
(2) 1 digit numerical suffix that indicates cam size. All are acceptable.
[16] Accepted for water contact only.
[17] (1) 1 digit alphanumerical suffix that indicates end-use market. All are acceptable.
(2) 1 digit numerical suffix that indicates voltage. All are acceptable.
(3) 1 digit numerical suffix that indicates cam height. All are acceptable.
(4) 1 digit numerical suffix that indicates motor speed. All are acceptable.
(5) 1 digit numerical suffix that indicates pressure switch. All are acceptable.
(6) 1 digit numerical suffix that indicates bypass. All are acceptable.
(7) 1 digit numerical suffix that indicates ports. All are acceptable.
(8) 1 digit numerical suffix that indicates pump head orientation. All are acceptable.
(9) 1 digit alphabetical suffix that indicates packaging. All are acceptable.
(10) Optional 1 or 2 digit alphabetical suffix that indicates suppression circuitry. R
or RL are acceptable.
[18] (1) Single alphabetical or numerical digit indicating type of controls. All are
acceptable.
(2) Single numerical digit indicating housing material & discharge orientation. All
are acceptable.
(3) Single numerical digit indicating end-use market designation. 0 is acceptable.
(4) Single alphabetical or numerical digit indicating voltage. All are acceptable.
(5) Single numerical digit indicating Diaphragm and Valve materials. 2, 4 are
acceptable.
(6) Single alphabetical or numerical digit indicating cam & motor speed. All are
acceptable.
(7) Optional single alphabetical digit indicating packaging code. All are acceptable.
|
|
|
INFUSER |
|
| INF (1)(2)(3)(4)(5)(6)(7)[19] [Pb] | |
[19] (1) Single alphabetical or numerical digit indicating Housing Material.
0, 1, and 6 are acceptable for all food contact types except for
Alcohol Greater than 8%.
2, 3, 4, 5, 7, 8, and 9 are acceptable for all food contact types.
(2) Single alphabetical or numerical digit indicating Elastomers Materials.
0, 2, and 3 are acceptable.
(3) Double alphabetical or numerical digit indicating Liquid Fittings.
All are acceptable.
(4) Double alphabetical or numerical digit indicating Orifice size.
All are acceptable.
(5) Single alphabetical or numerical digit indicating Foamer configuration.
All are acceptable.
(6) Optional Double alphabetical or numerical digit indicating Packaging Code.
All are acceptable.
(7) Optional Single alphabetical or numerical digit indicating System Component Code.
All are acceptable.
[Pb] Product also evaluated and determined to possess weighted average lead content of
<=0.25% and complies with lead content requirements for “lead free” plumbing as defined
by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
Water Act.
|
|
|
Pressure Switch |
|
| 02090318 | |
| 02095100 | |
| 02095103 | |
| 02095105 | |
| 02095115 | |
| 02095570 | |
|
Quad Pump |
|
| 04(1)(2)(3)(4)4(5)(6)[13] [20] | |
| 04(1)(2)(3)531(6)[13] [20] | |
| 04(1)(2)4500(6)[13] [20] | |
| 04405143(6)[16] [20] [Pb] | |
| 4(1)(2)(3)(4)4(5)(6)[13] [20] | |
| 4(1)(2)4500(6)[13] [20] | |
| 4405143[16] [20] [Pb] | |
| I103050211[13] | |
| I301050110[13] | |
| R4(1)(2)(3)(4)4(5)(6)[13] [20] | |
| RL4(1)(2)(3)(4)4(5)(6)[13] [20] | |
| S4(1)(2)(3)(4)4(5)(6)[13] [20] | |
[13] Accepted for acidic, non-acidic, and alcohol contact up to 212°F only.
[16] Accepted for water contact only.
[20] (1) Single numerical digit indicating upper housing type. All are acceptable.
(2) Single numerical digit indicating motor data. All are acceptable.
(3) Single numerical digit indicating labeling for specific market. All are
acceptable.
(4) Single numerical digit indicating voltage. All are acceptable.
(5) Single numerical digit indicating flow type. All are acceptable.
(6) Optional single alpha digit indicating type of packaging. All are acceptable.
[Pb] Product also evaluated and determined to possess weighted average lead content of
<=0.25% and complies with lead content requirements for “lead free” plumbing as defined
by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
Water Act.
|
|
|
Sold-Out Switch |
|
| 02095402 | |
| 02095502 | |
| 02095503 | |
| 02095532 | |
| 02095538 | |
| 02095540 | |
|
Transfer Valve |
|
| 01500(1)(2)(3)(4) | |
| 01502(1)(2)(3)(4) | |
| 01503(1)(2)(3)(4) | |
| 01600(1)(2)(3)(4) | |
| 01602(1)(2)(3)(4) | |
| 01603(1)(2)(3)(4) | |
|
Triplex Pump |
|
| 03(1)(2)(3) (4)(5)(6)(7)[21] [22] [23] | |
| 03(1)(2)(3) 5(4)[24] [25] | |
| R3(1)(2)(3) (4)(5)(6)(7)[21] [22] [23] | |
| R3(1)(2)(3) 5(4)[24] [25] | |
[21] (1) Single alpha or numerical digit indicating type of controls. All are acceptable.
(2) Single numerical digit indicating housing material & discharge orientation. 1, 5, 7
are acceptable.
(3) Single numerical digit indicating end-use market designation. 0, 1, 4 and 5 are
acceptable.
(4) Single numerical digit indicating voltage. All are acceptable.
(5) Single numerical digit indicating Diaphragm and Valve materials. 2, 4 are
acceptable.
(6) Single numerical digit indicating cam & motor speed. All are acceptable.
(7) Optional single alpha digit indicating packaging code. All are acceptable.
[22] (1) Single alphabetical or numerical digit indicating type of controls. All are
acceptable.
(2) Single numerical digit indicating housing material & discharge orientation. 0, 2, 4,
6 are acceptable.
(3) Single numerical digit indicating end-use market designation. 0, 1, 4 and 5 are
acceptable.
(4) Single alphabetical or numerical digit indicating voltage. All are acceptable.
(5) Single numerical digit indicating Diaphragm and Valve materials. 2, 4 are
acceptable.
(6) Single alphabetical or numerical digit indicating cam & motor speed. All are
acceptable.
(7) Optional single alphabetical digit indicating packaging code. All are acceptable.
[23] (1) Single alphabetical or numerical digit indicating type of controls. All are
acceptable.
(2) Single numerical digit indicating housing material & discharge orientation. 0, 4
and 6 are acceptable.
(3) Single numerical digit indicating end-use market designation. 0, 1, 4 and 5 are
acceptable.
(4) Single alphabetical or numerical digit indicating voltage. All are acceptable.
(5) Single numerical digit indicating Diaphragm and Valve materials. 6 is acceptable.
(6) Single alphabetical or numerical digit indicating cam & motor speed. All are
acceptable.
(7) Optional single alphabetical digit indicating packaging code. All are acceptable.
[24] (1) Single alpha or numerical digit indicating type of controls. All are acceptable
(2) Single numerical digit indicating housing material & discharge orientation. 0, 2,
4,
6 are acceptable.
(3) Single numerical digit indicating end-use market designation. 0, 1, 4 and 5 are
acceptable.
(4) Two alpha or numerical digits indicating variations in switch settings, private
labeling, wire lengths, discharge orientation, and type of wire connectors.
[25] (1) Single alphabetical or numerical digit indicating type of controls. All are
acceptable.
(2) Single numerical digit indicating housing material & discharge orientation. 0, 2,
4,
6 are acceptable.
(3) Single numerical digit indicating end-use market designation. 0, 1, 4 and 5 are
acceptable.
(4) Two alphabetical or numerical digits indicating variations in switch settings,
private labeling, wire lengths, discharge orientation, and type of wire
connectors.
|
|
|
Triplex Pump - Jabsco Brand |
|
| 31395-0392[26] [Pb] | |
[26] Accepted for contact with Water, AL, acidic & non-acidic.
[Pb] Product also evaluated and determined to possess weighted average lead content of
<=0.25% and complies with lead content requirements for “lead free” plumbing as defined
by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
Water Act.
|
|
|
Vacuum Switch |
|
| 02095116[27] | |
| 02095121[13] | |
| 02095300[27] | |
| 02095306[28] | |
| 02095307[28] | |
| 02095535[27] | |
| 02095536[27] | |
| 02095542[27] | |
| 02095550[29] | |
[13] Accepted for acidic, non-acidic, and alcohol contact up to 212°F only.
[27] Accepted for acidic & non-acidic beverages, and alcoholic (maximum 15%) beverages, up to
150°F.
[28] Acceptable for all Food Contact Types up to 212 °F except for foods containing more than
15% alcohol.
[29] Accepted for Dairy, acidic & non-acidic beverage up to 180°F, and alcoholic (maximum
15%) beverages up to 150°F.
|
|
|
Water Booster Pump |
|
| K56(1)[30] | |
[30] (1) 5-digit suffix indicating variations in packaging, size of inlet or outlet
fittings, single or multiple pumps mounted on a metal or plastic bracket.
|
|
Facility : Jiangsu, China
|
COMPONENTS: |
|
|
Booster System[1] |
|
| (1) 28(2)(3)(4)(5)(6)(7)[2] | |
[1] Accepted for water contact only.
[2] (1) Single alpha or numerical digit indicating Region. 0 and R are acceptable.
(2) Single numerical digit indicating Pump Type. All NSF certified pumps are acceptable.
(3) Single numerical digit indicating special characteristics. All are acceptable.
(4) Single numerical digit indicating voltage. All are acceptable.
(5) Single alpha or numerical digit indicating type of controls. All are acceptable.
(6) Single numerical digit indicating tank size. 1, 2, 4 & 6 are acceptable.
(7) Single numerical digit indicating Fittings Configuration. All are acceptable.
|
|
Facility : Shenzhen, China
|
BevJet LC Bottled Water Dispensing System[1] [2] [Pb] |
|
| BLC(1)(2)(3)(4)(5)10(6) | |
| BLC(1)(2)(3)(4)(5)11(6) | |
[1] (1) Single digit numerical suffix indicating voltage and outlet type. All are
acceptable.
(2) Single digit numerical suffix indicating flow rate. All are acceptable.
(3) Single digit numerical suffix indicating pressure switch setting. All are
acceptable.
(4) Single digit numerical suffix indicating bypass option. All are acceptable.
(5) Single digit alpha or numerical suffix indicating port fitting type.
All are acceptable.
(6) Optional single digit alphabetical suffix indicating type of packaging. All are
acceptable.
[2] Accepted for water contact only.
[Pb] Product also evaluated and determined to possess weighted average lead content of
<=0.25% and complies with lead content requirements for “lead free” plumbing as defined
by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
Water Act.
|
|
|
Flojet K50 Series[3] |
|
| K50(1)000(2) | |
[3] (1) 1-digit alphanumeric suffix indicating wetted materials. 2 is acceptable.
(2) 1-digit alphanumeric suffix indicating air inlet clip color. 0, 1 or 2 are
acceptable.
|
|
|
COMPONENTS: |
|
|
4 Chamber Diaphragm Pump[4] [Pb] |
|
| Q(1)(2)(3)(4)(5)(6)(7)(8)(9)(10)[5] | |
[4] Accepted for Water, acidic, non-acidic, and alcohol contact up to 180°F only.
[5] (1) Double alphabetical or numerical digit indicating Flow rate. All are acceptable.
(2) Single alphabetical or numerical digit indicating voltage/motor data. All are
acceptable.
(3) Single alphabetical or numerical digit indicating labeling for specific market.
F, S & G are acceptable.
(4) Single alphabetical or numerical digit indicating Pump Housing type. 1 is
acceptable.
(5) Single alphabetical or numerical digit indicating Diaph/Valve materials. 1, 2, 3,
4 & 5 are acceptable.
(6) Single alphabetical or numerical digit indicating pressure switch option. All
are acceptable.
(7) Single alphabetical or numerical digit indicating Bypass option. All are
acceptable.
(8) Single alphabetical or numerical digit indicating configurations. All are
acceptable.
(9) Optional Single alphabetical or numerical digit indicating Packaging. All are
acceptable.
(10) Optional Double alphabetical or numerical digit indicating special configs (i.e.
nonstandard motor lengths).
[Pb] Product also evaluated and determined to possess weighted average lead content of
<=0.25% and complies with lead content requirements for “lead free” plumbing as defined
by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
Water Act.
|
|
|
Accumulator Tank[6] [7] [8] |
|
| 3057300(1)(2) | |
[6] (1) Two-digit numerical suffix indicating shorter version or different fittings. 02,
07, 10, 12, 22, and 23 are approved.
(2) Optional single alpha character indicating type of packaging.
[7] Accepted for water contact up to 73°F only.
[8] Accepted for use with acidic and non-acidic.
|
|
|
Air Operated Pump[9] [Pb] |
|
| B55(1)0000[10] [11] | |
| B55(1)0000(3) | |
| B55(1)0010[10] [11] | |
| B55(1)0010(3) | |
| B5A(1)0000[10] [11] | |
| B5A(1)0000(3) | |
| H55(1)00(2)[10] [12] | |
| H55(1)00(2)(3) | |
| H56(1)00(2)[10] [12] | |
| H56(1)00(2)(3) | |
| H58(1)00(2)[10] [12] | |
| H58(1)00(2)(3) | |
| H58E00(2)[10] [12] | |
| H58E00(2)(3) | |
| H5A(1)00(2)[10] [12] | |
| H5A(1)00(2)(3) | |
| H80E00(2)[12] [13] | |
| H80E00(2)(3) | |
| H80EX0(2)[12] [13] | |
| H80EX0(2)(3) | |
| H81EX0M0[13] | |
| H81EX0M0(3) | |
| H81ZX000[14] | |
| H81ZX000(3) | |
| P50005(1)[15] [16] | |
| P50005(1)(3) | |
| P50011(1)[15] [16] | |
| P50011(1)(3) | |
| P50015(1)[15] [16] | |
| P50015(1)(3) | |
[9] (3)Optional single digit alpha or numerical suffix indicating MFG site. All are
acceptable.
[10] Accepted for use with acidic, non-acidic, and alcoholic beverages only up to 180°F. Not
acceptable for use with dairy, or oils & fats.
[11] (1) 1-digit alphanumeric suffix indicating wetted materials. 1 is acceptable.
[12] (1) 1-digit alphanumeric suffix indicating wetted materials. 1, 4, 6, B, or F are
acceptable.
(2) 2-digit numerical suffix indicating differences in internal configurations or
differences in size or color of ports. 00, 01, 02, 03, 10, 30 or 40 are acceptable.
[13] Accepted for use with acidic, non-acidic, alcoholic, and dairy beverages only up to
100°F. Not acceptable for use with oils & fats.
[14] Accepted for use with all food contact types up to 212°F.
[15] Accepted for use with acidic, non-acidic, and alcoholic beverages only up to 150°F. Not
acceptable for use with dairy, or oils & fats.
[16] (1) 2-digit numerical suffix indicating differences in automatic shutoff feature. 01,
02, 40, 41, 42, 51, and 52 are acceptable.
[Pb] Product also evaluated and determined to possess weighted average lead content of
<=0.25% and complies with lead content requirements for “lead free” plumbing as defined
by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
Water Act.
|
|
|
BOTTLED WATER BOOSTER SYSTEM [Pb] |
|
| BW5(1)(2)(3)(4)2(6)(7)[17] | |
[17] (1) Single digit numerical suffix indicating Appliance Controller Interface. All are
acceptable.
(2) Single digit numerical suffix indicating number of inlet tubes. All are
acceptable.
(3) Single digit numerical suffix indicating voltage and type of power cord and plug.
All are acceptable.
(4) Single digit numerical suffix indicating suction tube size. All are acceptable.
(5) Single digit numerical suffix indicating flow in GPM. All are acceptable.
(6) Single digit numerical suffix indicating automatic float switch.
All are acceptable.
(7) Single digit alphabetical suffix indicating type of packaging. All are
acceptable.
[Pb] Product also evaluated and determined to possess weighted average lead content of
<=0.25% and complies with lead content requirements for “lead free” plumbing as defined
by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
Water Act.
|
|
|
Bag-in-Box Pump System [Pb] |
|
| BIB5(1)(2)(3)(4)[18] [19] | |
| FSP0001[20] | |
| FSP0002[20] | |
| FSP0005[20] | |
| FSP0007[20] | |
[18] (1) Single digit numerical suffix indicating Vaccum Switch. All are acceptable.
(2) Single digit numerical suffix indicating Flow. All are acceptable.
(3) Single digit numerical suffix indicating voltage and type of power cord and plug.
All are acceptable.
(4) Optional Single digit alphabetical suffix indicating type of packaging. All are
acceptable.
[19] Accepted for use with acidic, non-acidic and alcoholic beverages up to a maximum of 15%
alcohol only
[20] Accepted for use with alcoholic beverages only up to a maximum of 15% alchohol.
[Pb] Product also evaluated and determined to possess weighted average lead content of
<=0.25% and complies with lead content requirements for “lead free” plumbing as defined
by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
Water Act.
|
|
|
BevJet LC Beverage Pump |
|
|
BevJet LC Beverage Pump System[1] [Pb] |
|
| BLC(1)(2)(3)(4)(5)00(6)[21] | |
| BLC(1)(2)(3)(4)(5)0R(6)[21] | |
| BLC(1)(2)(3)(4)(5)0Z(6)[21] | |
| BLC(1)(2)(3)2(5)00(6)[22] | |
| BLC(1)(2)(3)3(5)00(6)[23] [24] | |
[1] (1) Single digit numerical suffix indicating voltage and outlet type. All are
acceptable.
(2) Single digit numerical suffix indicating flow rate. All are acceptable.
(3) Single digit numerical suffix indicating pressure switch setting. All are
acceptable.
(4) Single digit numerical suffix indicating bypass option. All are acceptable.
(5) Single digit alpha or numerical suffix indicating port fitting type.
All are acceptable.
(6) Optional single digit alphabetical suffix indicating type of packaging. All are
acceptable.
[21] Certified for contact with acidic and non-acidic, and < 15% alcohol beverages.
[22] Accepted for use with aqueous acidic, aqueous non-acidic and alcohol. Cannot be used
with alcohols greater than 15%.
[23] Acceptable for all food contact types.
[24] Model is certified for use with chocolate syrup.
[Pb] Product also evaluated and determined to possess weighted average lead content of
<=0.25% and complies with lead content requirements for “lead free” plumbing as defined
by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
Water Act.
|
|
|
Bottled Water Pump System [Pb] |
|
| BW1(1)(2)(3)(4)[25] | |
| BW2(1)(2)(3)(4)[25] | |
| BW3(1)(2)(3)(4)[25] | |
| BW5(1)(2)(3)-(4)(5)(6)(7)[17] | |
| BWS1(1)(2)(3)(4)[25] | |
| BWS2(1)(2)(3)(4)[25] | |
| BWS3(1)(2)(3)(4)[25] | |
[17] (1) Single digit numerical suffix indicating Appliance Controller Interface. All are
acceptable.
(2) Single digit numerical suffix indicating number of inlet tubes. All are
acceptable.
(3) Single digit numerical suffix indicating voltage and type of power cord and plug.
All are acceptable.
(4) Single digit numerical suffix indicating suction tube size. All are acceptable.
(5) Single digit numerical suffix indicating flow in GPM. All are acceptable.
(6) Single digit numerical suffix indicating automatic float switch.
All are acceptable.
(7) Single digit alphabetical suffix indicating type of packaging. All are
acceptable.
[25] (1) Single digit numerical suffix indicating Appliance Controller Interface. All are
acceptable.
(2) Single digit numerical suffix indicating number of inlet tubes. All are
acceptable.
(3) Single digit alpha or numerical suffix indicating special configurations (cable or
suction tube length, float diameter, or on/off switch). 0 through 9 or A through
X are acceptable.
(4) Single digit alphabetical suffix indicating type of packaging. All are
acceptable.
[Pb] Product also evaluated and determined to possess weighted average lead content of
<=0.25% and complies with lead content requirements for “lead free” plumbing as defined
by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
Water Act.
|
|
|
Diaphragm Pump for Beverage Contact |
|
| 08(1)(2)1(3)44(4)[26] [27] | |
| 08(1)(2)15(5)(4)[26] [27] | |
| 08(1)(2)16(6)(4)[26] [27] | |
| P(1)(2)(3)(4)(5)(6)(7)(8)(9)(10)[27] [28] | |
| R8(1)(2)1(3)44(4)[26] [27] | |
| R8(1)(2)15(5)(4)[26] [27] | |
| R8(1)(2)16(6)(4)[26] [27] | |
[26] (1) Single digit numerical suffix indicating GPM. All are acceptable.
(2) Single digit numerical suffix indicating switch or bypass type. All are
acceptable.
(3) Single digit numerical suffix indicating voltage. All are acceptable.
(4) Optional single digit alpha suffix indicating packaging. All are acceptable.
(5) Two-digit numerical suffix indicating special OEM configuration for UL Listed 115
VAC pumps, and which does not affect external design & construction or any wetted
materials.
(6) Two-digit numerical suffix indicating special OEM configuration which does not
affect external design & construction or any wetted materials.
[27] Accepted for contact with acidic, non-acidic beverages, and alcohol up to 180°F.
[28] (1) Double alphabetical or numerical digit indicating Flow rate.
All are acceptable.
(2) Single alphabetical or numerical digit indicating voltage/motor
data. All are acceptable.
(3) Single alphabetical or numerical digit indicating labeling for specific
market. F, S, & G are acceptable.
(4) Single alphabetical or numerical digit indicating Pump Housing type.
1, 2, 3, 4 and A are acceptable.
(5) Single alphabetical or numerical digit indicating Diaphragm/Valve
materials. 1, 2, 3, 4 & 5 are acceptable.
(6) Single alphabetical or numerical digit indicating pressure switch option.
All are acceptable.
(7) Single alphabetical or numerical digit indicating Bypass option.
All are acceptable.
(8) Single alphabetical or numerical digit indicating configurations. All are
acceptable.
(9) Optional Single alphabetical or numerical digit indicating Packaging.
All are acceptable.
(10) Optional Double alphabetical or numerical digit indicating special configs.
|
|
|
Diaphragm Pump for Water Contact |
|
| 08(1)(2)1(3)44(4)[2] [26] | |
| 08(1)(2)15(5)(4)[2] [26] | |
| 08(1)(2)16(6)(4)[2] [26] | |
| P(1)(2)(3)(4)(5)(6)(7)(8)(9)(10)[2] [29] | |
| R8(1)(2)1(3)44(4)[2] [26] | |
| R8(1)(2)15(5)(4)[2] [26] | |
| R8(1)(2)16(6)(4)[2] [26] | |
[2] Accepted for water contact only.
[26] (1) Single digit numerical suffix indicating GPM. All are acceptable.
(2) Single digit numerical suffix indicating switch or bypass type. All are
acceptable.
(3) Single digit numerical suffix indicating voltage. All are acceptable.
(4) Optional single digit alpha suffix indicating packaging. All are acceptable.
(5) Two-digit numerical suffix indicating special OEM configuration for UL Listed 115
VAC pumps, and which does not affect external design & construction or any wetted
materials.
(6) Two-digit numerical suffix indicating special OEM configuration which does not
affect external design & construction or any wetted materials.
[29] (1) Double alphabetical or numerical digit indicating Flow rate.
All are acceptable.
(2) Single alphabetical or numerical digit indicating voltage/motor
data. All are acceptable.
(3) Single alphabetical or numerical digit indicating labeling for
specific market. F, S & G are acceptable.
(4) Single alphabetical or numerical digit indicating Pump Housing type.
5,6,7,8 and B are acceptable.
(5) Single alphabetical or numerical digit indicating Diaphragm/Valve
materials. 1, 2, 3, 4, & 5 are acceptable.
(6) Single alphabetical or numerical digit indicating pressure switch
option. All are acceptable.
(7) Single alphabetical or numerical digit indicating Bypass option.
All are acceptable.
(8) Single alphabetical or numerical digit indicating configurations. All
are acceptable.
(9) Optional Single alphabetical or numerical digit indicating Packaging.
All are acceptable.
(10) Optional Double alphabetical or numerical digit indicating
special configs.
|
|
|
Electrical Motor Pump [Pb] |
|
| LF(1)(2)(3)(4)(5)2(6)[30] [31] | |
| LF(1)(2)(3)(4)(5)4(6)[30] [31] | |
| LFP (1)(2)(3)(4)[32] [33] | |
| LFP(1)(2)(3)(4)(5)2(6)[30] [31] | |
| LFP(1)(2)(3)(4)(5)4(6)[31] [34] | |
| LFP(1)(2)(3)(4)(5)7(6)[22] [31] | |
| LFP(1)(2)(3)(4)(5)8(6)[23] [31] | |
| RLF(1)(2)(3)(4)(5)2(6)[30] [31] | |
| RLF(1)(2)(3)(4)(5)4(6)[30] [31] | |
| RLFP (1)(2)(3)(4)[32] [33] | |
| RLFP(1)(2)(3)(4)(5)2(6)[30] [31] | |
| RLFP(1)(2)(3)(4)(5)4(6)[31] [34] | |
| RLFP(1)(2)(3)(4)(5)7(6)[22] [31] | |
| RLFP(1)(2)(3)(4)(5)8(6)[23] [31] | |
[22] Accepted for use with aqueous acidic, aqueous non-acidic and alcohol. Cannot be used
with alcohols greater than 15%.
[23] Acceptable for all food contact types.
[30] Accepted for non-acidic and alcoholic beverage contact up to 166°F only. Not acceptable
for contact with acidic, dairy or oil.
[31] (1) Single numerical digit indicating voltage. All are acceptable.
(2) Single numerical digit indicating motor configuration. All are acceptable.
(3) Single numerical digit indicating cam. All are acceptable.
(4) Single numerical digit indicating pressure switch. All are acceptable.
(5) Single numerical digit indicating bypass. All are acceptable.
(6) Single alphabetical digit indicating packaging type. All are acceptable.
[32] (1) Single numerical digit indicating voltage. All
are acceptable.
(2) Single alphabetical digit indicating special configuration.
X is acceptable.
(3) Three numerical digits indicating special configuration. All
are acceptable.
(4) Optional single alphabetical digit indicating packaging type.
All are acceptable.
[33] Accepted for use with Aqueous Acidic, aqueous non-acidic,
and alcohol.
[34] Accepted for all food contact Types. Cannot be used with alcohols greater than 15%.
[Pb] Product also evaluated and determined to possess weighted average lead content of
<=0.25% and complies with lead content requirements for “lead free” plumbing as defined
by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
Water Act.
|
|
|
Expansion Valve[35] |
|
| 01451001 | |
[35] Accepted for use with acidic, non-acidic, alcoholic, and dairy (oil-in water emulsions)
beverages up to 212°F. Not acceptable for use with dairy (water-in-oil emulsions) or
oils & fats.
|
|
|
Flow Reversal Valve (Components for Air Pump)[36] [Pb] |
|
| FRV 0(1)(2)0 | |
| FRV 0(1)(2)1 | |
| FRV 0(1)(2)1A | |
| FRV 0(1)(2)1B | |
[36] (1) Any alphanumeric digit indicating Region.
(2) Any alphanumeric digit indicating configuration.
[Pb] Product also evaluated and determined to possess weighted average lead content of
<=0.25% and complies with lead content requirements for “lead free” plumbing as defined
by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
Water Act.
|
|
|
In-Line Strainer[37] [38] |
|
| 01720(1)(2)(3) | |
| 01740(1)(2)(3) | |
[37] (1) Single digit numerical suffix indicating filter screen material. 0 or 1 are
accepted.
(2) Two-digit numerical suffix indicating port size. All are acceptable.
(3) Optional single digit alphabetical suffix indicating packaging type. All are
accepted.
[38] Acceptable for all food contact types.
|
|
|
Pressure Regulator |
|
| 01750(1)(2)(3)(4)[39] [40] | |
| 01750558(4)[39] [41] | |
| 01752(1)(2)(3)(4)[39] [41] | |
| 01754(1)(2)(3)(4)[39] [41] | |
[39] (1) Single alphabetical or numerical digit indicating Configuration. All are
acceptable.
(2) Single alphabetical or numerical digit indicating maximum outlet pressure.
All are acceptable
(3) Single alphabetical or numerical digit indicating ports. All are acceptable.
(4) Optional single alphabetical digit indicating Packaging. All are acceptable.
[40] Accepted for water contact only up to 150°F.
[41] Accepted for contact with acidic and non-acidic beverages only up to 120°F.
|
|
|
Triplex Pump[2] [42] [43] [Pb] |
|
| 03(1)(2)(3) (4)(5)(6)(7)[44] [45] [46] | |
| 03(1)(2)(3) 5(4)[47] [48] | |
| R3(1)(2)(3) (4)(5)(6)(7)[44] [45] [46] | |
| R3(1)(2)(3) 5(4)[47] [48] | |
[2] Accepted for water contact only.
[42] Accepted for contact with Water, AL, acidic & non-acidic.
[43] Accepted for All food Contact Types.
[44] (1) Single alphabetical or numerical digit indicating type of controls. All are
acceptable.
(2) Single numerical digit indicating housing material & discharge orientation.
1, 5, 7 are acceptable.
(3) Single numerical digit indicating end-use market designation. 0, 1, 4 and 5 are
acceptable.
(4) Single alphabetical or numerical digit indicating voltage. All are acceptable.
(5) Single numerical digit indicating Diaphragm and Valve materials. 2, 4 are
acceptable.
(6) Single alphabetical or numerical digit indicating cam & motor speed. All are
acceptable.
(7) Optional single alphabetical digit indicating packaging code. All are acceptable.
[45] (1) Single alphabetical or numerical digit indicating type of controls. All are
acceptable.
(2) Single numerical digit indicating housing material & discharge orientation.
0, 2, 4, 6 are acceptable.
(3) Single numerical digit indicating end-use market designation. 0, 1, 4 and 5 are
acceptable.
(4) Single alphabetical or numerical digit indicating voltage. All are acceptable.
(5) Single numerical digit indicating Diaphragm and Valve materials. 2, 4 are
acceptable.
(6) Single alphabetical or numerical digit indicating cam & motor speed. All are
acceptable.
(7) Optional single alphabetical digit indicating packaging code. All are acceptable.
[46] (1) Single alphabetical or numerical digit indicating type of controls. All are
acceptable.
(2) Single numerical digit indicating housing material & discharge orientation.
0, 4, and 6 are acceptable.
(3) Single numerical digit indicating end-use market designation. 0, 1, 4 and 5 are
acceptable.
(4) Single alphabetical or numerical digit indicating voltage. All are acceptable.
(5) Single numerical digit indicating Diaphragm and Valve materials. 6 is acceptable.
(6) Single alphabetical or numerical digit indicating cam & motor speed. All are
acceptable.
(7) Optional single alphabetical digit indicating packaging code. All are acceptable.
[47] (1) Single alphabetical or numerical digit indicating type of controls. All are
acceptable.
(2) Single numerical digit indicating housing material & discharge orientation.
0, 2, 4, 6 are acceptable.
(3) Single numerical digit indicating end-use market designation. 0, 1, 4 and 5 are
acceptable.
(4) Two alphabetical or numerical digits indicating variations in switch settings,
private labeling, wire lengths, discharge orientation, and type of wire
connectors.
[48] (1) Single alphabetical or numerical digit indicating type of controls. All are
acceptable.
(2) Single numerical digit indicating housing material & discharge orientation.
0, 2, 4, 6 are acceptable.
(3) Single numerical digit indicating end-use market designation. 0, 1, 4 and 5 are
acceptable.
(4) Two alphabetical or numerical digits indicating variations in switch settings,
private labeling, wire lengths, discharge orientation, and type of wire
connectors.
[Pb] Product also evaluated and determined to possess weighted average lead content of
<=0.25% and complies with lead content requirements for “lead free” plumbing as defined
by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
Water Act.
|
|
|
Triplex Pump - Jabsco Brand[42] [Pb] |
|
| 31395-0392 | |
[42] Accepted for contact with Water, AL, acidic & non-acidic.
[Pb] Product also evaluated and determined to possess weighted average lead content of
<=0.25% and complies with lead content requirements for “lead free” plumbing as defined
by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
Water Act.
|
|
Facility : Abony, Hungary
|
COMPONENTS: |
|
|
Water Booster Pump |
|
| K56(1)[1] | |
[1] (1) 5-digit suffix indicating variations in packaging, size of inlet or outlet fittings,
single or multiple pumps mounted on a metal or plastic bracket.
|
|
Facility : Hai Phong City, Vietnam
|
BevJet LC Bottled Water Dispensing System[1] [2] [Pb] |
|
| BLC(1)(2)(3)(4)(5)10(6) | |
| BLC(1)(2)(3)(4)(5)11(6) | |
[1] (1) Single digit numerical suffix indicating voltage and outlet type. All are
acceptable.
(2) Single digit numerical suffix indicating flow rate. All are acceptable.
(3) Single digit numerical suffix indicating pressure switch setting. All are
acceptable.
(4) Single digit numerical suffix indicating bypass option. All are acceptable.
(5) Single digit alpha or numerical suffix indicating port fitting type.
All are acceptable.
(6) Optional single digit alphabetical suffix indicating type of packaging. All are
acceptable.
[2] Accepted for water contact only.
[Pb] Product also evaluated and determined to possess weighted average lead content of
<=0.25% and complies with lead content requirements for “lead free” plumbing as defined
by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
Water Act.
|
|
|
Flojet K50 Series[3] |
|
| K50(1)000(2) | |
[3] (1) 1-digit alphanumeric suffix indicating wetted materials. 2 is acceptable.
(2) 1-digit alphanumeric suffix indicating air inlet clip color. 0, 1 or 2 are
acceptable.
|
|
|
COMPONENTS: |
|
|
4 Chamber Diaphragm Pump[4] [Pb] |
|
| Q(1)(2)(3)(4)(5)(6)(7)(8)(9)(10)[5] | |
[4] Accepted for Water, acidic, non-acidic, and alcohol contact up to 180°F only.
[5] (1) Double alphabetical or numerical digit indicating Flow rate. All are acceptable.
(2) Single alphabetical or numerical digit indicating voltage/motor data. All are
acceptable.
(3) Single alphabetical or numerical digit indicating labeling for specific market.
F, S & G are acceptable.
(4) Single alphabetical or numerical digit indicating Pump Housing type. 1 is
acceptable.
(5) Single alphabetical or numerical digit indicating Diaph/Valve materials. 1, 2, 3,
4 & 5 are acceptable.
(6) Single alphabetical or numerical digit indicating pressure switch option. All
are acceptable.
(7) Single alphabetical or numerical digit indicating Bypass option. All are
acceptable.
(8) Single alphabetical or numerical digit indicating configurations. All are
acceptable.
(9) Optional Single alphabetical or numerical digit indicating Packaging. All are
acceptable.
(10) Optional Double alphabetical or numerical digit indicating special configs (i.e.
nonstandard motor lengths).
[Pb] Product also evaluated and determined to possess weighted average lead content of
<=0.25% and complies with lead content requirements for “lead free” plumbing as defined
by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
Water Act.
|
|
|
Accumulator Tank[6] [7] [8] |
|
| 3057300(1)(2) | |
[6] (1) Two-digit numerical suffix indicating shorter version or different fittings. 02,
07, 10, 12, 22, and 23 are approved.
(2) Optional single alpha character indicating type of packaging.
[7] Accepted for water contact up to 73°F only.
[8] Accepted for use with acidic and non-acidic.
|
|
|
Air Operated Pump[9] [Pb] |
|
| B55(1)0000[10] [11] | |
| B55(1)0000(3) | |
| B55(1)0010[10] [11] | |
| B55(1)0010(3) | |
| B5A(1)0000[10] [11] | |
| B5A(1)0000(3) | |
| H55(1)00(2)[10] [12] | |
| H55(1)00(2)(3) | |
| H56(1)00(2)[10] [12] | |
| H56(1)00(2)(3) | |
| H58(1)00(2)[10] [12] | |
| H58(1)00(2)(3) | |
| H58E00(2)[10] [12] | |
| H58E00(2)(3) | |
| H5A(1)00(2)[10] [12] | |
| H5A(1)00(2)(3) | |
| H80E00(2)[12] [13] | |
| H80E00(2)(3) | |
| H80EX0(2)[12] [13] | |
| H80EX0(2)(3) | |
| H81EX0M0[13] | |
| H81EX0M0(3) | |
| H81ZX000[14] | |
| H81ZX000(3) | |
| P50005(1)[15] [16] | |
| P50005(1)(3) | |
| P50011(1)[15] [16] | |
| P50011(1)(3) | |
| P50015(1)[15] [16] | |
| P50015(1)(3) | |
[9] (3) Optional single digit alpha or numerical suffix indicating MFG site. All are
acceptable.
[10] Accepted for use with acidic, non-acidic, and alcoholic beverages only up to 180°F. Not
acceptable for use with dairy, or oils & fats.
[11] (1) 1-digit alphanumeric suffix indicating wetted materials. 1 is acceptable.
[12] (1) 1-digit alphanumeric suffix indicating wetted materials. 1, 4, 6, B, or F are
acceptable.
(2) 2-digit numerical suffix indicating differences in internal configurations or
differences in size or color of ports. 00, 01, 02, 03, 10, 30 or 40 are acceptable.
[13] Accepted for use with acidic, non-acidic, alcoholic, and dairy beverages only up to
100°F. Not acceptable for use with oils & fats.
[14] Accepted for use with all food contact types up to 212°F.
[15] Accepted for use with acidic, non-acidic, and alcoholic beverages only up to 150°F. Not
acceptable for use with dairy, or oils & fats.
[16] (1) 2-digit numerical suffix indicating differences in automatic shutoff feature. 01,
02, 40, 41, 42, 51, and 52 are acceptable.
[Pb] Product also evaluated and determined to possess weighted average lead content of
<=0.25% and complies with lead content requirements for “lead free” plumbing as defined
by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
Water Act.
|
|
|
BOTTLED WATER BOOSTER SYSTEM [Pb] |
|
| BW5(1)(2)(3)(4)2(6)(7)[17] | |
[17] (1) Single digit numerical suffix indicating Appliance Controller Interface. All are
acceptable.
(2) Single digit numerical suffix indicating number of inlet tubes. All are
acceptable.
(3) Single digit numerical suffix indicating voltage and type of power cord and plug.
All are acceptable.
(4) Single digit numerical suffix indicating suction tube size. All are acceptable.
(5) Single digit numerical suffix indicating flow in GPM. All are acceptable.
(6) Single digit numerical suffix indicating automatic float switch.
All are acceptable.
(7) Single digit alphabetical suffix indicating type of packaging. All are
acceptable.
[Pb] Product also evaluated and determined to possess weighted average lead content of
<=0.25% and complies with lead content requirements for “lead free” plumbing as defined
by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
Water Act.
|
|
|
Bag-in-Box Pump System [Pb] |
|
| BIB5(1)(2)(3)(4)[18] [19] | |
| FSP0001[20] | |
| FSP0002[20] | |
| FSP0005[20] | |
| FSP0007[20] | |
[18] (1) Single digit numerical suffix indicating Vaccum Switch. All are acceptable.
(2) Single digit numerical suffix indicating Flow. All are acceptable.
(3) Single digit numerical suffix indicating voltage and type of power cord and plug.
All are acceptable.
(4) Optional Single digit alphabetical suffix indicating type of packaging. All are
acceptable.
[19] Accepted for use with acidic, non-acidic and alcoholic beverages up to a maximum of 15%
alcohol only
[20] Accepted for use with alcoholic beverages only up to a maximum of 15% alchohol.
[Pb] Product also evaluated and determined to possess weighted average lead content of
<=0.25% and complies with lead content requirements for “lead free” plumbing as defined
by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
Water Act.
|
|
|
BevJet LC Beverage Pump |
|
|
BevJet LC Beverage Pump System[1] [Pb] |
|
| BLC(1)(2)(3)(4)(5)00(6)[21] | |
| BLC(1)(2)(3)(4)(5)0R(6)[21] | |
| BLC(1)(2)(3)(4)(5)0Z(6)[21] | |
| BLC(1)(2)(3)2(5)00(6)[22] | |
| BLC(1)(2)(3)3(5)00(6)[23] [24] | |
[1] (1) Single digit numerical suffix indicating voltage and outlet type. All are
acceptable.
(2) Single digit numerical suffix indicating flow rate. All are acceptable.
(3) Single digit numerical suffix indicating pressure switch setting. All are
acceptable.
(4) Single digit numerical suffix indicating bypass option. All are acceptable.
(5) Single digit alpha or numerical suffix indicating port fitting type.
All are acceptable.
(6) Optional single digit alphabetical suffix indicating type of packaging. All are
acceptable.
[21] Certified for contact with acidic and non-acidic, and < 15% alcohol beverages.
[22] Accepted for use with aqueous acidic, aqueous non-acidic and alcohol. Cannot be used
with alcohols greater than 15%.
[23] Acceptable for all food contact types.
[24] Model is certified for use with chocolate syrup.
[Pb] Product also evaluated and determined to possess weighted average lead content of
<=0.25% and complies with lead content requirements for “lead free” plumbing as defined
by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
Water Act.
|
|
|
Bottled Water Pump System [Pb] |
|
| BW1(1)(2)(3)(4)[25] | |
| BW2(1)(2)(3)(4)[25] | |
| BW3(1)(2)(3)(4)[25] | |
| BW5(1)(2)(3)-(4)(5)(6)(7)[17] | |
| BWS1(1)(2)(3)(4)[25] | |
| BWS2(1)(2)(3)(4)[25] | |
| BWS3(1)(2)(3)(4)[25] | |
[17] (1) Single digit numerical suffix indicating Appliance Controller Interface. All are
acceptable.
(2) Single digit numerical suffix indicating number of inlet tubes. All are
acceptable.
(3) Single digit numerical suffix indicating voltage and type of power cord and plug.
All are acceptable.
(4) Single digit numerical suffix indicating suction tube size. All are acceptable.
(5) Single digit numerical suffix indicating flow in GPM. All are acceptable.
(6) Single digit numerical suffix indicating automatic float switch.
All are acceptable.
(7) Single digit alphabetical suffix indicating type of packaging. All are
acceptable.
[25] (1) Single digit numerical suffix indicating Appliance Controller Interface. All are
acceptable.
(2) Single digit numerical suffix indicating number of inlet tubes. All are
acceptable.
(3) Single digit alpha or numerical suffix indicating special configurations (cable or
suction tube length, float diameter, or on/off switch). 0 through 9 or A through
X are acceptable.
(4) Single digit alphabetical suffix indicating type of packaging. All are
acceptable.
[Pb] Product also evaluated and determined to possess weighted average lead content of
<=0.25% and complies with lead content requirements for “lead free” plumbing as defined
by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
Water Act.
|
|
|
Diaphragm Pump for Beverage Contact |
|
| 08(1)(2)1(3)44(4)[26] [27] | |
| 08(1)(2)15(5)(4)[26] [27] | |
| 08(1)(2)16(6)(4)[26] [27] | |
| P(1)(2)(3)(4)(5)(6)(7)(8)(9)(10)[27] [28] | |
| R8(1)(2)1(3)44(4)[26] [27] | |
| R8(1)(2)15(5)(4)[26] [27] | |
| R8(1)(2)16(6)(4)[26] [27] | |
[26] (1) Single digit numerical suffix indicating GPM. All are acceptable.
(2) Single digit numerical suffix indicating switch or bypass type. All are
acceptable.
(3) Single digit numerical suffix indicating voltage. All are acceptable.
(4) Optional single digit alpha suffix indicating packaging. All are acceptable.
(5) Two-digit numerical suffix indicating special OEM configuration for UL Listed 115
VAC pumps, and which does not affect external design & construction or any wetted
materials.
(6) Two-digit numerical suffix indicating special OEM configuration which does not
affect external design & construction or any wetted materials.
[27] Accepted for contact with acidic, non-acidic beverages, and alcohol up to 180°F.
[28] (1) Double alphabetical or numerical digit indicating Flow rate.
All are acceptable.
(2) Single alphabetical or numerical digit indicating voltage/motor data.
All are acceptable.
(3) Single alphabetical or numerical digit indicating labeling for specific
market. F, S & G are acceptable.
(4) Single alphabetical or numerical digit indicating Pump Housing type.
1, 2, 3, 4 and A are acceptable.
(5) Single alphabetical or numerical digit indicating Diaphragm/Valve
materials. 1, 2, 3, 4 & 5 are acceptable.
(6) Single alphabetical or numerical digit indicating pressure switch option.
All are acceptable.
(7) Single alphabetical or numerical digit indicating Bypass option.
All are acceptable.
(8) Single alphabetical or numerical digit indicating configurations.
All are acceptable.
(9) Optional Single alphabetical or numerical digit indicating Packaging.
All are acceptable.
(10) Optional Double alphabetical or numerical digit indicating special configs.
|
|
|
Diaphragm Pump for Water Contact |
|
| 08(1)(2)1(3)44(4)[2] [26] | |
| 08(1)(2)15(5)(4)[2] [26] | |
| 08(1)(2)16(6)(4)[2] [26] | |
| P(1)(2)(3)(4)(5)(6)(7)(8)(9)(10)[2] [29] | |
| R8(1)(2)1(3)44(4)[2] [26] | |
| R8(1)(2)15(5)(4)[2] [26] | |
| R8(1)(2)16(6)(4)[2] [26] | |
[2] Accepted for water contact only.
[26] (1) Single digit numerical suffix indicating GPM. All are acceptable.
(2) Single digit numerical suffix indicating switch or bypass type. All are
acceptable.
(3) Single digit numerical suffix indicating voltage. All are acceptable.
(4) Optional single digit alpha suffix indicating packaging. All are acceptable.
(5) Two-digit numerical suffix indicating special OEM configuration for UL Listed 115
VAC pumps, and which does not affect external design & construction or any wetted
materials.
(6) Two-digit numerical suffix indicating special OEM configuration which does not
affect external design & construction or any wetted materials.
[29] (1) Double alphabetical or numerical digit indicating Flow rate.
All are acceptable.
(2) Single alphabetical or numerical digit indicating voltage/motor data.
All are acceptable.
(3) Single alphabetical or numerical digit indicating labeling for specific
market. F, S & G are acceptable.
(4) Single alphabetical or numerical digit indicating Pump Housing type.
5, 6, 7, 8 and B are acceptable.
(5) Single alphabetical or numerical digit indicating Diaphragm/Valve
materials. 1, 2, 3, 4 & 5 are acceptable.
(6) Single alphabetical or numerical digit indicating pressure switch option.
All are acceptable.
(7) Single alphabetical or numerical digit indicating Bypass option. All are
acceptable.
(8) Single alphabetical or numerical digit indicating configurations. All are
acceptable.
(9) Optional Single alphabetical or numerical digit indicating Packaging.
All are acceptable.
(10) Optional Double alphabetical or numerical digit indicating special configs.
|
|
|
Electrical Motor Pump [Pb] |
|
| LF(1)(2)(3)(4)(5)2(6)[30] [31] | |
| LF(1)(2)(3)(4)(5)4(6)[30] [31] | |
| LFP (1)(2)(3)(4)[32] [33] | |
| LFP(1)(2)(3)(4)(5)2(6)[30] [31] | |
| LFP(1)(2)(3)(4)(5)4(6)[31] [34] | |
| LFP(1)(2)(3)(4)(5)7(6)[22] [31] | |
| LFP(1)(2)(3)(4)(5)8(6)[23] [31] | |
| RLF(1)(2)(3)(4)(5)2(6)[30] [31] | |
| RLF(1)(2)(3)(4)(5)4(6)[30] [31] | |
| RLFP (1)(2)(3)(4)[32] [33] | |
| RLFP(1)(2)(3)(4)(5)2(6)[30] [31] | |
| RLFP(1)(2)(3)(4)(5)4(6)[31] [34] | |
| RLFP(1)(2)(3)(4)(5)7(6)[22] [31] | |
| RLFP(1)(2)(3)(4)(5)8(6)[23] [31] | |
[22] Accepted for use with aqueous acidic, aqueous non-acidic and alcohol. Cannot be used
with alcohols greater than 15%.
[23] Acceptable for all food contact types.
[30] Accepted for non-acidic and alcoholic beverage contact up to 166°F only. Not acceptable
for contact with acidic, dairy or oil.
[31] (1) Single numerical digit indicating voltage. All are acceptable.
(2) Single numerical digit indicating motor configuration. All are acceptable.
(3) Single numerical digit indicating cam. All are acceptable.
(4) Single numerical digit indicating pressure switch. All are acceptable.
(5) Single numerical digit indicating bypass. All are acceptable.
(6) Single alphabetical digit indicating packaging type. All are acceptable.
[32] (1) Single numerical digit indicating voltage. All are acceptable.
(2) Single alphabetical digit indicating special configuration. X is
acceptable.
(3) Three numerical digits indicating special configuration. All are
acceptable.
(4) Optional single alphabetical digit indicating packaging type. All
are acceptable.
[33] Accepted for use with Aqueous Acidic, aqueous non-acidic, and alcohol.
[34] Accepted for all food contact Types. Cannot be used with alcohols greater than 15%.
[Pb] Product also evaluated and determined to possess weighted average lead content of
<=0.25% and complies with lead content requirements for “lead free” plumbing as defined
by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
Water Act.
|
|
|
Expansion Valve[35] |
|
| 01451001 | |
[35] Accepted for use with acidic, non-acidic, alcoholic, and dairy (oil-in water emulsions)
beverages up to 212°F. Not acceptable for use with dairy (water-in-oil emulsions) or
oils & fats.
|
|
|
Flow Reversal Valve (Components for Air Pump)[36] [Pb] |
|
| FRV 0(1)(2)0 | |
| FRV 0(1)(2)1 | |
| FRV 0(1)(2)1A | |
| FRV 0(1)(2)1B | |
[36] (1) Any alphanumeric digit indicating Region.
(2) Any alphanumeric digit indicating configuration.
[Pb] Product also evaluated and determined to possess weighted average lead content of
<=0.25% and complies with lead content requirements for “lead free” plumbing as defined
by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
Water Act.
|
|
|
In-Line Strainer[37] [38] |
|
| 01720(1)(2)(3) | |
| 01740(1)(2)(3) | |
[37] (1) Single digit numerical suffix indicating filter screen material. 0 or 1 are
accepted.
(2) Two-digit numerical suffix indicating port size. All are acceptable.
(3) Optional single digit alphabetical suffix indicating packaging type. All are
accepted.
[38] Acceptable for all food contact types.
|
|
|
Pressure Regulator |
|
| 01750(1)(2)(3)(4)[39] [40] | |
| 01750558(4)[39] [41] | |
| 01752(1)(2)(3)(4)[39] [41] | |
| 01754(1)(2)(3)(4)[39] [41] | |
[39] (1) Single alphabetical or numerical digit indicating Configuration.
All are acceptable.
(2) Single alphabetical or numerical digit indicating maximum outlet pressure.
All are acceptable
(3) Single alphabetical or numerical digit indicating ports. All are acceptable.
(4) Optional single alphabetical digit indicating Packaging. All are acceptable.
[40] Accepted for water contact only up to 150°F.
[41] Accepted for contact with acidic and non-acidic beverages only up to 120°F.
|
|
|
Triplex Pump[2] [42] [43] [Pb] |
|
| 03(1)(2)(3) (4)(5)(6)(7)[44] [45] [46] | |
| 03(1)(2)(3) 5(4)[47] [48] | |
| R3(1)(2)(3) (4)(5)(6)(7)[44] [45] [46] | |
| R3(1)(2)(3) 5(4)[47] [48] | |
[2] Accepted for water contact only.
[42] Accepted for contact with Water, AL, acidic & non-acidic.
[43] Accepted for All food Contact Types.
[44] (1) Single alphabetical or numerical digit indicating type of controls.
All are acceptable.
(2) Single numerical digit indicating housing material & discharge
orientation. 1, 5, 7 are acceptable.
(3) Single numerical digit indicating end-use market designation. 0, 1, 4 and 5 are
acceptable.
(4) Single alphabetical or numerical digit indicating voltage. All are acceptable.
(5) Single numerical digit indicating Diaphragm and Valve materials. 2, 4
are acceptable.
(6) Single alphabetical or numerical digit indicating cam & motor speed. All are
acceptable.
(7) Optional single alphabetical digit indicating packaging code. All are acceptable.
[45] (1) Single alphabetical or numerical digit indicating type of controls. All are
acceptable.
(2) Single numerical digit indicating housing material & discharge orientation.
0, 2, 4, 6 are acceptable.
(3) Single numerical digit indicating end-use market designation. 0, 1, 4 and 5 are
acceptable.
(4) Single alphabetical or numerical digit indicating voltage. All are acceptable.
(5) Single numerical digit indicating Diaphragm and Valve materials. 2, 4 are
acceptable.
(6) Single alphabetical or numerical digit indicating cam & motor speed. All are
acceptable.
(7) Optional single alphabetical digit indicating packaging code. All are
acceptable.
[46] (1) Single alphabetical or numerical digit indicating type of controls. All are
acceptable.
(2) Single numerical digit indicating housing material & discharge orientation.
0, 4, and 6 are acceptable.
(3) Single numerical digit indicating end-use market designation. 0, 1, 4 and 5 are
acceptable.
(4) Single alphabetical or numerical digit indicating voltage. All are acceptable.
(5) Single numerical digit indicating Diaphragm and Valve materials. 6 is acceptable.
(6) Single alphabetical or numerical digit indicating cam & motor speed. All are
acceptable.
(7) Optional single alphabetical digit indicating packaging code. All are acceptable.
[47] (1) Single alphabetical or numerical digit indicating type of controls. All are
acceptable.
(2) Single numerical digit indicating housing material & discharge orientation.
0, 2, 4, 6 are acceptable.
(3) Single numerical digit indicating end-use market designation. 0, 1, 4 and
5 are acceptable.
(4) Two alphabetical or numerical digits indicating variations in switch settings,
private labeling, wire lengths, discharge orientation, and type of wire
connectors.
[48] (1) Single alphabetical or numerical digit indicating type of controls. All are
acceptable.
(2) Single numerical digit indicating housing material & discharge orientation.
0, 2, 4, 6 are acceptable.
(3) Single numerical digit indicating end-use market designation. 0, 1, 4 and 5 are
acceptable.
(4) Two alphabetical or numerical digits indicating variations in switch settings,
private labeling, wire lengths, discharge orientation, and type of wire
connectors.
[Pb] Product also evaluated and determined to possess weighted average lead content of
<=0.25% and complies with lead content requirements for “lead free” plumbing as defined
by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
Water Act.
|
|
|
Triplex Pump - Jabsco Brand[42] [Pb] |
|
| 31395-0392 | |
[42] Accepted for contact with Water, AL, acidic & non-acidic.
[Pb] Product also evaluated and determined to possess weighted average lead content of
<=0.25% and complies with lead content requirements for “lead free” plumbing as defined
by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
Water Act.
|
|
Number of matching Manufacturers is 1
Number of matching Products is 274
Processing time was 0 seconds
