NSF Product and Service Listings
These NSF Official Listings are current as of Thursday, January 15, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/food/Listings.asp?Standard=004&Company=24100&
NSF/ANSI 4
Commercial Cooking, Rethermalization and Powered Hot Food Holding and Transport Equipment
Commercial Cooking, Rethermalization and Powered Hot Food Holding and Transport Equipment
| Pitco Frialator, LLC | |
| 552-553 Route 3A | |
| Bow, NH 03304 | |
| United States | |
| 603-225-6684 |
Facility : Bow, NH
|
Bread and Batter[1] [2] [3] |
|
| AE14S-BNB | |
| AG14S-BNB | |
| BB12 | |
| BB14 | |
| BB18 | |
| BBE12A | |
| BBE14 | |
| BBE18 | |
| BBTF2000 | |
| FBGD14 | |
| FBGD18 | |
| SEBNB14 | |
| SEBNB18 | |
| SEBNBH50 | |
| SELVBNB14 | |
| SELVBNB184 | |
| SGBNB14 | |
| SGBNB18 | |
| SGBNBH50 | |
| SGMBNB24 | |
| SGMBNB34 | |
| SSHBNB55 | |
| SSHBNB75 | |
| SSHLVBNB14 | |
| SSHLVBNB184 | |
[1] May have one or more of the following suffixes: D - Drain, Q - Food warmer
[2] May or may not have the following suffixes, in any combination or multitude, added to
the base model to indicate graphics and/or preset adjustments for specific customers: A
through Z and 0 through 9. Suffixes may or may not be separated from the base model by
a dash (-) or slash (/).
[3] May or may not have the following prefixes that define a customer order specification,
in any combination or multitude, added to the base model to indicate graphics and/or
preset adjustments for specific customers: A through Z and 0 through 9. Prefixes are
separated from the base model by a dash (-) or slash (/). For example: BK12-SG14 or
MD2/SG14-J.
|
|
|
Counter Top Rethermalizer[2] [3] |
|
| CRTE | |
[2] May or may not have the following suffixes, in any combination or multitude, added to
the base model to indicate graphics and/or preset adjustments for specific customers: A
through Z and 0 through 9. Suffixes may or may not be separated from the base model by
a dash (-) or slash (/).
[3] May or may not have the following prefixes that define a customer order specification,
in any combination or multitude, added to the base model to indicate graphics and/or
preset adjustments for specific customers: A through Z and 0 through 9. Prefixes are
separated from the base model by a dash (-) or slash (/). For example: BK12-SG14 or
MD2/SG14-J.
|
|
|
Electric Deep Fat Doughnut or Food Fryer |
|
| E24 | |
| E24F | |
| E24FF | |
| E34 | |
| E34F | |
| E34FF | |
|
Electric Floor Deep Fat Fryer[2] [3] [4] [5] [6] |
|
| AE14-S-C- | |
| AE14S-C/FD- | |
| DDE24R | |
| DDE24RUFM | |
| E12A | |
| E14 | |
| E14B | |
| E14BK | |
| E14BR | |
| E14WKS | |
| E14X | |
| E18 | |
| E18B | |
| E18WKS | |
| E18WKSUFM | |
| E24 | |
| E24F | |
| E24FF | |
| E24R | |
| E24RUFM | |
| E34 | |
| E34F | |
| E34FF | |
| E35 | |
| E35R | |
| E35T | |
| E35TR | |
| E400 | |
| E400R | |
| E400T | |
| E400TR | |
| E500D | |
| E7 | |
| E7-2 | |
| E7-2WKS | |
| E7-3 | |
| E7-3WKS | |
| E7-3WKSUFM | |
| E7-4 | |
| E7-4WKS | |
| E7-4WKSUFM | |
| E7B | |
| E7BR | |
| E7R | |
| ME14S-C- | |
| ME2 | |
| ME2T | |
| SE14 | |
| SE1418 | |
| SE1418R | |
| SE1418X | |
| SE147 | |
| SE147R | |
| SE147X | |
| SE148 | |
| SE148R | |
| SE148X | |
| SE14R | |
| SE14T | |
| SE14TR | |
| SE14TX | |
| SE14X | |
| SE18 | |
| SE1814 | |
| SE1814R | |
| SE1814X | |
| SE184 | |
| SE184R | |
| SE184X | |
| SE18R | |
| SE18X | |
| SE6H | |
| SE714 | |
| SEBNB14 | |
| SEBNB18 | |
| SEBNBH14 | |
| SEF | |
| SEH50 | |
| SEH5017 | |
| SEH5017T | |
| SEH50T | |
[2] May or may not have the following suffixes, in any combination or multitude, added to
the base model to indicate graphics and/or preset adjustments for specific customers: A
through Z and 0 through 9. Suffixes may or may not be separated from the base model by
a dash (-) or slash (/).
[3] May or may not have the following prefixes that define a customer order specification,
in any combination or multitude, added to the base model to indicate graphics and/or
preset adjustments for specific customers: A through Z and 0 through 9. Prefixes are
separated from the base model by a dash (-) or slash (/). For example: BK12-SG14 or
MD2/SG14-J.
[4] May or may not have the following suffixes added to the base models:
Electrical Controls: E, G, H, HH, J, K, L, M, N, Q, T, TT, W, WW, Y, YY, Z, ZZ, Z/2, YA,
YB, Y2/A, Y/2B, Y/F, ZA, ZB, Z/2A, Z/2B, Z/F.
Number of fryers contained in the battery: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9.
C - Casters
D - Bottom drain
F - Front extension
P - Full port 1 1/2" drain valve
R - Rear extension
S - Stainless steel tank
SS - Stainless steel tank and cabinet
U - Modular filter system
V - Universal tank
+ - All stainless
[5] May have one of the following suffixes for number of fryers contained in the battery: 0,
1, 2, 3, 4, 5, 6, 7, 8, 9.
B - High input (KW)
R - High input (KW)
X - Reduced input (KW)
[6] May have optional prefix SF (integral filter system in single unit) or an F within the
model designation resulting in SEF, SGF, SSHF, or SGMF.
|
|
|
Gas Counter Deep Fat Fryer[2] [3] |
|
| 12 | |
| 12MCD | |
| 6 | |
| 6D | |
| SGC | |
[2] May or may not have the following suffixes, in any combination or multitude, added to
the base model to indicate graphics and/or preset adjustments for specific customers: A
through Z and 0 through 9. Suffixes may or may not be separated from the base model by
a dash (-) or slash (/).
[3] May or may not have the following prefixes that define a customer order specification,
in any combination or multitude, added to the base model to indicate graphics and/or
preset adjustments for specific customers: A through Z and 0 through 9. Prefixes are
separated from the base model by a dash (-) or slash (/). For example: BK12-SG14 or
MD2/SG14-J.
|
|
|
Gas Deep Fat Doughnut Fryers with Under Fryer Filter |
|
| 24R | |
| 24RUFM | |
|
Gas Deep Fat Fryer with Under Fryer Filter |
|
| 147UFM | |
| 14RUFM | |
| 14UFM | |
| 18UFM[7] | |
| 714UFM | |
| HE147UFM | |
| HE18UFM | |
| MG14S-C/MFD- | |
| PM14UFM | |
| PR14UFM | |
| SF14RUFM | |
| SF14UFM | |
[7] May have one or more of the following suffixes:
B - Bread & Batter
C - Controller
F - Full vat
FD - Filter option
S - Split vat
|
|
|
Gas Floor Deep Fat Fryer[2] [3] [4] [5] [6] |
|
| 12D | |
| 14 | |
| 147 | |
| 147UFM[7] | |
| 14B | |
| 14R | |
| 14RUFM[7] | |
| 14RWKS | |
| 14UFM[7] | |
| 14WKS | |
| 18 | |
| 18-2WKSUFM | |
| 18UFM[7] | |
| 18WKS | |
| 18WKSUFM | |
| 20F | |
| 20P | |
| 24F | |
| 24FF | |
| 24P | |
| 24R | |
| 24RUFM | |
| 26F | |
| 26P | |
| 34F | |
| 34FF | |
| 34P | |
| 35C | |
| 35C[+] | |
| 35C[+]D | |
| 35C[+]S | |
| 40C | |
| 40C[+] | |
| 40D | |
| 40S | |
| 40SS | |
| 45C | |
| 45C[+] | |
| 45C[+]D | |
| 45C[+]S | |
| 45ER | |
| 65 | |
| 65C | |
| 65C[+] | |
| 65C[+]S | |
| 7 | |
| 7-2 | |
| 7-2WKS | |
| 7-3WKS | |
| 7-3WKSUFM | |
| 7-4WKS | |
| 7-4WKSUFM | |
| 714 | |
| 714UFM[7] | |
| AG14S | |
| AG14SS | |
| FBG18 | |
| FBG24 | |
| MG14S-C- | |
| MG2 | |
| MG2T | |
| P35 | |
| PM14 | |
| PR14 | |
| SF-SSHLV14(T) | |
[2] May or may not have the following suffixes, in any combination or multitude, added to
the base model to indicate graphics and/or preset adjustments for specific customers: A
through Z and 0 through 9. Suffixes may or may not be separated from the base model by
a dash (-) or slash (/).
[3] May or may not have the following prefixes that define a customer order specification,
in any combination or multitude, added to the base model to indicate graphics and/or
preset adjustments for specific customers: A through Z and 0 through 9. Prefixes are
separated from the base model by a dash (-) or slash (/). For example: BK12-SG14 or
MD2/SG14-J.
[4] May or may not have the following suffixes added to the base models:
Electrical Controls: E, G, H, HH, J, K, L, M, N, Q, T, TT, W, WW, Y, YY, Z, ZZ, Z/2, YA,
YB, Y2/A, Y/2B, Y/F, ZA, ZB, Z/2A, Z/2B, Z/F.
Number of fryers contained in the battery: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9.
C - Casters
D - Bottom drain
F - Front extension
P - Full port 1 1/2" drain valve
R - Rear extension
S - Stainless steel tank
SS - Stainless steel tank and cabinet
U - Modular filter system
V - Universal tank
+ - All stainless
[5] May have one of the following suffixes for number of fryers contained in the battery: 0,
1, 2, 3, 4, 5, 6, 7, 8, 9.
B - High input (KW)
R - High input (KW)
X - Reduced input (KW)
[6] May have optional prefix SF (integral filter system in single unit) or an F within the
model designation resulting in SEF, SGF, SSHF, or SGMF.
[7] May have one or more of the following suffixes:
B - Bread & Batter
C - Controller
F - Full vat
FD - Filter option
S - Split vat
|
|
|
Gas Floor Deep Fat Fryer |
|
| SF-SSHLV184 | |
|
Gas Floor Deep Fat Fryer[2] [3] [4] [5] [6] |
|
| SF-SSHLV184 | |
| SG14 | |
| SG14R | |
| SG14T | |
| SG18 | |
| SG18F | |
| SG18HP | |
| SG24F | |
| SG24FF | |
| SG24P | |
| SG34F | |
| SG34FF | |
| SG34P | |
| SG6H | |
| SGBNBH50 | |
| SGF | |
| SGH50 | |
| SGH50T | |
| SGLVRF | |
| SGM(18)D | |
| SGM1824 | |
| SGM18D4 | |
| SGM18D5 | |
| SGM20 | |
| SGM24 | |
| SGM34 | |
| SGM55(L) | |
| SGM60(L) | |
| SGMF | |
| SOH55 | |
| SOH55T | |
| SOJ35 | |
| SOJ45 | |
| SOJ45T | |
| SSH55 | |
| SSH55R | |
| SSH55T | |
| SSH55TR | |
| SSH60 | |
| SSH60R | |
| SSH60W | |
| SSH60WR | |
| SSH75 | |
| SSH75R | |
| SSHF | |
| SSHLV14 | |
| SSHLV14T | |
[2] May or may not have the following suffixes, in any combination or multitude, added to
the base model to indicate graphics and/or preset adjustments for specific customers: A
through Z and 0 through 9. Suffixes may or may not be separated from the base model by
a dash (-) or slash (/).
[3] May or may not have the following prefixes that define a customer order specification,
in any combination or multitude, added to the base model to indicate graphics and/or
preset adjustments for specific customers: A through Z and 0 through 9. Prefixes are
separated from the base model by a dash (-) or slash (/). For example: BK12-SG14 or
MD2/SG14-J.
[4] May or may not have the following suffixes added to the base models:
Electrical Controls: E, G, H, HH, J, K, L, M, N, Q, T, TT, W, WW, Y, YY, Z, ZZ, Z/2, YA,
YB, Y2/A, Y/2B, Y/F, ZA, ZB, Z/2A, Z/2B, Z/F.
Number of fryers contained in the battery: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9.
C - Casters
D - Bottom drain
F - Front extension
P - Full port 1 1/2" drain valve
R - Rear extension
S - Stainless steel tank
SS - Stainless steel tank and cabinet
U - Modular filter system
V - Universal tank
+ - All stainless
[5] May have one of the following suffixes for number of fryers contained in the battery: 0,
1, 2, 3, 4, 5, 6, 7, 8, 9.
B - High input (KW)
R - High input (KW)
X - Reduced input (KW)
[6] May have optional prefix SF (integral filter system in single unit) or an F within the
model designation resulting in SEF, SGF, SSHF, or SGMF.
[7] May have one or more of the following suffixes:
B - Bread & Batter
C - Controller
F - Full vat
FD - Filter option
S - Split vat
|
|
|
Gas Floor Deep Fat Fryer |
|
| SSHLV184 | |
|
Gas Floor Deep Fat Fryer[2] [3] [4] [5] [6] |
|
| SSHLV184 | |
[2] May or may not have the following suffixes, in any combination or multitude, added to
the base model to indicate graphics and/or preset adjustments for specific customers: A
through Z and 0 through 9. Suffixes may or may not be separated from the base model by
a dash (-) or slash (/).
[3] May or may not have the following prefixes that define a customer order specification,
in any combination or multitude, added to the base model to indicate graphics and/or
preset adjustments for specific customers: A through Z and 0 through 9. Prefixes are
separated from the base model by a dash (-) or slash (/). For example: BK12-SG14 or
MD2/SG14-J.
[4] May or may not have the following suffixes added to the base models:
Electrical Controls: E, G, H, HH, J, K, L, M, N, Q, T, TT, W, WW, Y, YY, Z, ZZ, Z/2, YA,
YB, Y2/A, Y/2B, Y/F, ZA, ZB, Z/2A, Z/2B, Z/F.
Number of fryers contained in the battery: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9.
C - Casters
D - Bottom drain
F - Front extension
P - Full port 1 1/2" drain valve
R - Rear extension
S - Stainless steel tank
SS - Stainless steel tank and cabinet
U - Modular filter system
V - Universal tank
+ - All stainless
[5] May have one of the following suffixes for number of fryers contained in the battery: 0,
1, 2, 3, 4, 5, 6, 7, 8, 9.
B - High input (KW)
R - High input (KW)
X - Reduced input (KW)
[6] May have optional prefix SF (integral filter system in single unit) or an F within the
model designation resulting in SEF, SGF, SSHF, or SGMF.
[7] May have one or more of the following suffixes:
B - Bread & Batter
C - Controller
F - Full vat
FD - Filter option
S - Split vat
|
|
|
Gas Floor Deep Fat Fryer |
|
| SSHLV184R | |
|
Gas Floor Deep Fat Fryer[2] [3] [4] [5] [6] |
|
| SSHLV184R | |
| VF35 | |
| VF35-ES | |
[2] May or may not have the following suffixes, in any combination or multitude, added to
the base model to indicate graphics and/or preset adjustments for specific customers: A
through Z and 0 through 9. Suffixes may or may not be separated from the base model by
a dash (-) or slash (/).
[3] May or may not have the following prefixes that define a customer order specification,
in any combination or multitude, added to the base model to indicate graphics and/or
preset adjustments for specific customers: A through Z and 0 through 9. Prefixes are
separated from the base model by a dash (-) or slash (/). For example: BK12-SG14 or
MD2/SG14-J.
[4] May or may not have the following suffixes added to the base models:
Electrical Controls: E, G, H, HH, J, K, L, M, N, Q, T, TT, W, WW, Y, YY, Z, ZZ, Z/2, YA,
YB, Y2/A, Y/2B, Y/F, ZA, ZB, Z/2A, Z/2B, Z/F.
Number of fryers contained in the battery: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9.
C - Casters
D - Bottom drain
F - Front extension
P - Full port 1 1/2" drain valve
R - Rear extension
S - Stainless steel tank
SS - Stainless steel tank and cabinet
U - Modular filter system
V - Universal tank
+ - All stainless
[5] May have one of the following suffixes for number of fryers contained in the battery: 0,
1, 2, 3, 4, 5, 6, 7, 8, 9.
B - High input (KW)
R - High input (KW)
X - Reduced input (KW)
[6] May have optional prefix SF (integral filter system in single unit) or an F within the
model designation resulting in SEF, SGF, SSHF, or SGMF.
[7] May have one or more of the following suffixes:
B - Bread & Batter
C - Controller
F - Full vat
FD - Filter option
S - Split vat
|
|
|
Gas Floor Deep Fat Fryer |
|
| VF65 | |
|
Gas Floor Deep Fat Fryer[2] [3] [4] [5] [6] |
|
| VF65 | |
[2] May or may not have the following suffixes, in any combination or multitude, added to
the base model to indicate graphics and/or preset adjustments for specific customers: A
through Z and 0 through 9. Suffixes may or may not be separated from the base model by
a dash (-) or slash (/).
[3] May or may not have the following prefixes that define a customer order specification,
in any combination or multitude, added to the base model to indicate graphics and/or
preset adjustments for specific customers: A through Z and 0 through 9. Prefixes are
separated from the base model by a dash (-) or slash (/). For example: BK12-SG14 or
MD2/SG14-J.
[4] May or may not have the following suffixes added to the base models:
Electrical Controls: E, G, H, HH, J, K, L, M, N, Q, T, TT, W, WW, Y, YY, Z, ZZ, Z/2, YA,
YB, Y2/A, Y/2B, Y/F, ZA, ZB, Z/2A, Z/2B, Z/F.
Number of fryers contained in the battery: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9.
C - Casters
D - Bottom drain
F - Front extension
P - Full port 1 1/2" drain valve
R - Rear extension
S - Stainless steel tank
SS - Stainless steel tank and cabinet
U - Modular filter system
V - Universal tank
+ - All stainless
[5] May have one of the following suffixes for number of fryers contained in the battery: 0,
1, 2, 3, 4, 5, 6, 7, 8, 9.
B - High input (KW)
R - High input (KW)
X - Reduced input (KW)
[6] May have optional prefix SF (integral filter system in single unit) or an F within the
model designation resulting in SEF, SGF, SSHF, or SGMF.
[7] May have one or more of the following suffixes:
B - Bread & Batter
C - Controller
F - Full vat
FD - Filter option
S - Split vat
|
|
|
Pasta Perfect Cooker, Floor Type - Electric[2] [3] [8] [9] [10] [11] |
|
| PE14 | |
| PEN14 | |
| PPE14 | |
| PPEN14 | |
| PPSSPE14 | |
| SSPE14 | |
[2] May or may not have the following suffixes, in any combination or multitude, added to
the base model to indicate graphics and/or preset adjustments for specific customers: A
through Z and 0 through 9. Suffixes may or may not be separated from the base model by
a dash (-) or slash (/).
[3] May or may not have the following prefixes that define a customer order specification,
in any combination or multitude, added to the base model to indicate graphics and/or
preset adjustments for specific customers: A through Z and 0 through 9. Prefixes are
separated from the base model by a dash (-) or slash (/). For example: BK12-SG14 or
MD2/SG14-J.
[8] With or without the following suffixes:
C - Casters
D - Deep tank
F - Faucet
H - Boil/Simmer switch
HH - Digital solid state control
L - Basket lift
LL - Dual basket lift
M - Manual control
N - Instalation for rinse tank
V - Overflow drain manifold attachment
ZA, ZB, Z/2A, Z/2B: Different control options
[9] May have suffix J for electrical control.
[10] Beginning serial Number: 101184.
[11] Equipment may have optional regulated or non-regulated water fill system.
|
|
|
Pasta Perfect Cooker, Floor Type - Gas[2] [3] [8] [9] [10] [11] |
|
| PG14 | |
| PGN14 | |
| PPG14 | |
| PPGN14 | |
| PPSSPG14 | |
| SSPG14 | |
[2] May or may not have the following suffixes, in any combination or multitude, added to
the base model to indicate graphics and/or preset adjustments for specific customers: A
through Z and 0 through 9. Suffixes may or may not be separated from the base model by
a dash (-) or slash (/).
[3] May or may not have the following prefixes that define a customer order specification,
in any combination or multitude, added to the base model to indicate graphics and/or
preset adjustments for specific customers: A through Z and 0 through 9. Prefixes are
separated from the base model by a dash (-) or slash (/). For example: BK12-SG14 or
MD2/SG14-J.
[8] With or without the following suffixes:
C - Casters
D - Deep tank
F - Faucet
H - Boil/Simmer switch
HH - Digital solid state control
L - Basket lift
LL - Dual basket lift
M - Manual control
N - Instalation for rinse tank
V - Overflow drain manifold attachment
ZA, ZB, Z/2A, Z/2B: Different control options
[9] May have suffix J for electrical control.
[10] Beginning serial Number: 101184.
[11] Equipment may have optional regulated or non-regulated water fill system.
|
|
|
Pasta Rinse Sink |
|
| RSCPE14 | |
| SSRS14 | |
|
Portable Cooking Oil Filter[2] [3] [12] |
|
| CPF-65 | |
| P14 | |
| P14K | |
| P18 | |
| P18K | |
| P20 | |
| P24 | |
| P26 | |
| P34 | |
| P50 | |
| P90K | |
| P90KL | |
| RP14 | |
| RP14 | |
| RP18 | |
| RP18 | |
| SF50A | |
| SF65A | |
| SFM50A | |
| SFM65A | |
[2] May or may not have the following suffixes, in any combination or multitude, added to
the base model to indicate graphics and/or preset adjustments for specific customers: A
through Z and 0 through 9. Suffixes may or may not be separated from the base model by
a dash (-) or slash (/).
[3] May or may not have the following prefixes that define a customer order specification,
in any combination or multitude, added to the base model to indicate graphics and/or
preset adjustments for specific customers: A through Z and 0 through 9. Prefixes are
separated from the base model by a dash (-) or slash (/). For example: BK12-SG14 or
MD2/SG14-J.
[12] Suffix H: Heater strip option
|
|
|
Rethermalizer[2] [3] [9] [13] |
|
| RTE14 | |
| RTE14S | |
| RTG14 | |
| RTG14S | |
| RTG14S-2 | |
| RTG18 | |
| SRTE | |
| SRTG | |
[2] May or may not have the following suffixes, in any combination or multitude, added to
the base model to indicate graphics and/or preset adjustments for specific customers: A
through Z and 0 through 9. Suffixes may or may not be separated from the base model by
a dash (-) or slash (/).
[3] May or may not have the following prefixes that define a customer order specification,
in any combination or multitude, added to the base model to indicate graphics and/or
preset adjustments for specific customers: A through Z and 0 through 9. Prefixes are
separated from the base model by a dash (-) or slash (/). For example: BK12-SG14 or
MD2/SG14-J.
[9] May have suffix J for electrical control.
[13] Rethermalizers are listed for use with prepackaged food only.
|
|
|
COMPONENTS: |
|
|
Drop-In Gas Deep Fat Fryer |
|
| SG14DI | |
| SG14RDI | |
| SG14TDI | |
| SG18DI | |
|
Drop-In Gas Deep Fat Fryer without Cabinet[2] [3] [14] |
|
| 12DDI | |
| 12DI | |
| 14DI | |
| 14RDI | |
| 18DI | |
| 6DDI | |
| 7DI | |
| SG14DI | |
| SG14RDI | |
| SG14TDI | |
| SG18DI | |
[2] May or may not have the following suffixes, in any combination or multitude, added to
the base model to indicate graphics and/or preset adjustments for specific customers: A
through Z and 0 through 9. Suffixes may or may not be separated from the base model by
a dash (-) or slash (/).
[3] May or may not have the following prefixes that define a customer order specification,
in any combination or multitude, added to the base model to indicate graphics and/or
preset adjustments for specific customers: A through Z and 0 through 9. Prefixes are
separated from the base model by a dash (-) or slash (/). For example: BK12-SG14 or
MD2/SG14-J.
[14] D - Deep tank
R - Increased rating above the basic rating
S - Stainless steel fat container
|
|
|
Pasta Rinse Sink[2] [3] |
|
| RS14D | |
[2] May or may not have the following suffixes, in any combination or multitude, added to
the base model to indicate graphics and/or preset adjustments for specific customers: A
through Z and 0 through 9. Suffixes may or may not be separated from the base model by
a dash (-) or slash (/).
[3] May or may not have the following prefixes that define a customer order specification,
in any combination or multitude, added to the base model to indicate graphics and/or
preset adjustments for specific customers: A through Z and 0 through 9. Prefixes are
separated from the base model by a dash (-) or slash (/). For example: BK12-SG14 or
MD2/SG14-J.
|
|
Facility : Groveton, NH
|
Counter Top Rethermalizer[1] [2] [3] |
|
| CRTE | |
[1] May or may not have the following suffixes, in any combination or multitude, added to
the base model to indicate graphics and/or preset adjustments for specific customers: A
through Z and 0 through 9. Suffixes may or may not be separated from the base model by
a dash (-) or slash (/).
[2] May or may not have the following prefixes that define a customer order specification,
in any combination or multitude, added to the base model to indicate graphics and/or
preset adjustments for specific customers: A through Z and 0 through 9. Prefixes are
separated from the base model by a dash (-) or slash (/). For example: BK12-SG14 or
MD2/SG14-J.
[3] Rethermalizers are listed for use with prepackaged food only.
|
|
|
Gas Counter Deep Fat Fryer[1] [2] |
|
| 12 | |
| 6 | |
| SGC | |
[1] May or may not have the following suffixes, in any combination or multitude, added to
the base model to indicate graphics and/or preset adjustments for specific customers: A
through Z and 0 through 9. Suffixes may or may not be separated from the base model by
a dash (-) or slash (/).
[2] May or may not have the following prefixes that define a customer order specification,
in any combination or multitude, added to the base model to indicate graphics and/or
preset adjustments for specific customers: A through Z and 0 through 9. Prefixes are
separated from the base model by a dash (-) or slash (/). For example: BK12-SG14 or
MD2/SG14-J.
|
|
|
Gas Floor Deep Fat Fryer[1] [2] [4] [5] [6] |
|
| 12D | |
| 14 | |
| 147 | |
| 147UFM[7] | |
| 14B | |
| 14R | |
| 14RUFM[7] | |
| 14RWKS | |
| 14UFM[7] | |
| 14WKS | |
| 18 | |
| 18-2WKSUFM | |
| 18UFM[7] | |
| 18WKS | |
| 18WKSUFM | |
| 20F | |
| 20P | |
| 24F | |
| 24FF | |
| 24P | |
| 24R | |
| 24RUFM | |
| 26F | |
| 26P | |
| 34F | |
| 34FF | |
| 34P | |
| 35C | |
| 35C[+] | |
| 35C[+]D | |
| 35C[+]S | |
| 40C | |
| 40C[+] | |
| 40D | |
| 40S | |
| 40SS | |
| 45C | |
| 45C[+] | |
| 45C[+]D | |
| 45C[+]S | |
| 45ER | |
| 65 | |
| 65C | |
| 65C[+] | |
| 65C[+]S | |
| 7 | |
| 7-2 | |
| 7-2WKS | |
| 7-3WKS | |
| 7-3WKSUFM | |
| 7-4WKS | |
| 7-4WKSUFM | |
| 714 | |
| 714UFM[7] | |
| FBG18 | |
| FBG24 | |
| MG2 | |
| MG2T | |
| P35 | |
| PM14 | |
| PR14 | |
| SF-SSHLV14(T) | |
| SF-SSHLV184 | |
| SG14 | |
| SG14R | |
| SG14T | |
| SG18 | |
| SG18F | |
| SG24F | |
| SG24FF | |
| SG24P | |
| SG34F | |
| SG34FF | |
| SG34P | |
| SG6H | |
| SGF | |
| SGH50 | |
| SGH50T | |
| SGLVRF | |
| SGM(18)D | |
| SGM1824 | |
| SGM18D4 | |
| SGM18D5 | |
| SGM20 | |
| SGM24 | |
| SGM34 | |
| SGM55(L) | |
| SGM60(L) | |
| SGMF | |
| SOH55 | |
| SOH55T | |
| SOJ35 | |
| SOJ45 | |
| SOJ45T | |
| SSH55 | |
| SSH55R | |
| SSH55T | |
| SSH55TR | |
| SSH60 | |
| SSH60R | |
| SSH60W | |
| SSH60WR | |
| SSH75 | |
| SSH75R | |
| SSHF | |
| SSHLV14 | |
| SSHLV14T | |
| SSHLV184 | |
| SSHLV184R | |
| VF35 | |
| VF35-ES | |
| VF65 | |
[1] May or may not have the following suffixes, in any combination or multitude, added to
the base model to indicate graphics and/or preset adjustments for specific customers: A
through Z and 0 through 9. Suffixes may or may not be separated from the base model by
a dash (-) or slash (/).
[2] May or may not have the following prefixes that define a customer order specification,
in any combination or multitude, added to the base model to indicate graphics and/or
preset adjustments for specific customers: A through Z and 0 through 9. Prefixes are
separated from the base model by a dash (-) or slash (/). For example: BK12-SG14 or
MD2/SG14-J.
[4] May or may not have the following suffixes added to the base models:
Electrical Controls: E, G, H, HH, J, K, L, M, N, Q, T, TT, W, WW, Y, YY, Z, ZZ, Z/2, YA,
YB, Y2/A, Y/2B, Y/F, ZA, ZB, Z/2A, Z/2B, Z/F.
Number of fryers contained in the battery: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9.
C - Casters
D - Bottom drain
F - Front extension
P - Full port 1 1/2" drain valve
R - Rear extension
S - Stainless steel tank
SS - Stainless steel tank and cabinet
U - Modular filter system
V - Universal tank
+ - All stainless
[5] May have one of the following suffixes for number of fryers contained in the battery: 0,
1, 2, 3, 4, 5, 6, 7, 8, 9.
B - High input (KW)
R - High input (KW)
X - Reduced input (KW)
[6] May have optional prefix SF (integral filter system in single unit) or an F within the
model designation resulting in SEF, SGF, SSHF, or SGMF.
[7] May have one or more of the following suffixes:
B - Bread & Batter
C - Controller
F - Full vat
FD - Filter option
S - Split vat
|
|
|
Pasta Perfect Cooker, Floor Type - Electric[1] [2] [8] [9] [10] |
|
| PE14 | |
| PEN14 | |
| PPE14 | |
| PPEN14 | |
| PPSSPE14 | |
| SSPE14 | |
[1] May or may not have the following suffixes, in any combination or multitude, added to
the base model to indicate graphics and/or preset adjustments for specific customers: A
through Z and 0 through 9. Suffixes may or may not be separated from the base model by
a dash (-) or slash (/).
[2] May or may not have the following prefixes that define a customer order specification,
in any combination or multitude, added to the base model to indicate graphics and/or
preset adjustments for specific customers: A through Z and 0 through 9. Prefixes are
separated from the base model by a dash (-) or slash (/). For example: BK12-SG14 or
MD2/SG14-J.
[8] May have suffix J for electrical control.
[9] With or without the following suffixes:
C - Casters
D - Deep tank
F - Faucet
H - Boil/Simmer switch
HH - Digital solid state control
L - Basket lift
LL - Dual basket lift
M - Manual control
N - Instalation for rinse tank
V - Overflow drain manifold attachment
ZA, ZB, Z/2A, Z/2B: Different control options
[10] Equipment may have optional regulated or non-regulated water fill system.
|
|
|
Pasta Perfect Cooker, Floor Type - Gas[2] [3] [4] [8] [9] [10] |
|
| PG14 | |
| PGN14 | |
| PPG14 | |
| PPGN14 | |
| PPSSPG14 | |
| SSPG14 | |
[2] May or may not have the following prefixes that define a customer order specification,
in any combination or multitude, added to the base model to indicate graphics and/or
preset adjustments for specific customers: A through Z and 0 through 9. Prefixes are
separated from the base model by a dash (-) or slash (/). For example: BK12-SG14 or
MD2/SG14-J.
[3] Rethermalizers are listed for use with prepackaged food only.
[4] May or may not have the following suffixes added to the base models:
Electrical Controls: E, G, H, HH, J, K, L, M, N, Q, T, TT, W, WW, Y, YY, Z, ZZ, Z/2, YA,
YB, Y2/A, Y/2B, Y/F, ZA, ZB, Z/2A, Z/2B, Z/F.
Number of fryers contained in the battery: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9.
C - Casters
D - Bottom drain
F - Front extension
P - Full port 1 1/2" drain valve
R - Rear extension
S - Stainless steel tank
SS - Stainless steel tank and cabinet
U - Modular filter system
V - Universal tank
+ - All stainless
[8] May have suffix J for electrical control.
[9] With or without the following suffixes:
C - Casters
D - Deep tank
F - Faucet
H - Boil/Simmer switch
HH - Digital solid state control
L - Basket lift
LL - Dual basket lift
M - Manual control
N - Instalation for rinse tank
V - Overflow drain manifold attachment
ZA, ZB, Z/2A, Z/2B: Different control options
[10] Equipment may have optional regulated or non-regulated water fill system.
|
|
|
Pasta Rinse Sink |
|
| RS14D[1] [2] | |
| RSCPE14 | |
| SSRS14 | |
[1] May or may not have the following suffixes, in any combination or multitude, added to
the base model to indicate graphics and/or preset adjustments for specific customers: A
through Z and 0 through 9. Suffixes may or may not be separated from the base model by
a dash (-) or slash (/).
[2] May or may not have the following prefixes that define a customer order specification,
in any combination or multitude, added to the base model to indicate graphics and/or
preset adjustments for specific customers: A through Z and 0 through 9. Prefixes are
separated from the base model by a dash (-) or slash (/). For example: BK12-SG14 or
MD2/SG14-J.
|
|
|
Rethermalizer[1] [2] [3] [8] |
|
| RTE14 | |
| RTE14S | |
| RTG14 | |
| RTG14S | |
| RTG14S-2 | |
| SRTE | |
| SRTG | |
[1] May or may not have the following suffixes, in any combination or multitude, added to
the base model to indicate graphics and/or preset adjustments for specific customers: A
through Z and 0 through 9. Suffixes may or may not be separated from the base model by
a dash (-) or slash (/).
[2] May or may not have the following prefixes that define a customer order specification,
in any combination or multitude, added to the base model to indicate graphics and/or
preset adjustments for specific customers: A through Z and 0 through 9. Prefixes are
separated from the base model by a dash (-) or slash (/). For example: BK12-SG14 or
MD2/SG14-J.
[3] Rethermalizers are listed for use with prepackaged food only.
[8] May have suffix J for electrical control.
|
|
|
COMPONENTS: |
|
|
Drop-In Gas Deep Fat Fryer without Cabinet[1] [2] [11] |
|
| 12DDI | |
| 12DI | |
| 14DI | |
| 14RDI | |
| 18DI | |
| 6DDI | |
| 7DI | |
| SG14DI | |
| SG14RDI | |
| SG14TDI | |
| SG18DI | |
[1] May or may not have the following suffixes, in any combination or multitude, added to
the base model to indicate graphics and/or preset adjustments for specific customers: A
through Z and 0 through 9. Suffixes may or may not be separated from the base model by
a dash (-) or slash (/).
[2] May or may not have the following prefixes that define a customer order specification,
in any combination or multitude, added to the base model to indicate graphics and/or
preset adjustments for specific customers: A through Z and 0 through 9. Prefixes are
separated from the base model by a dash (-) or slash (/). For example: BK12-SG14 or
MD2/SG14-J.
[11] D - Deep tank
R - Increased rating above the basic rating
S - Stainless steel fat container
|
|
Facility : Pembroke, NH
|
Portable Cooking Oil Filter[1] [2] [3] |
|
| P14 | |
| P14K | |
| P18 | |
| P18K | |
| P20 | |
| P24 | |
| P26 | |
| P34 | |
| P50 | |
| P90K | |
| P90KL | |
| RP14 | |
| RP18 | |
| SF50A | |
| SF65A | |
| SFM50A | |
| SFM65A | |
[1] May or may not have the following suffixes, in any combination or
multitude, added to the base model to indicate graphics and/or
preset adjustments for specific customers: A through Z and 0 through 9.
Suffixes may or may not be separated from the base model by a dash (-)
or slash (/).
[2] May or may not have the following prefixes that define a customer
order specification, in any combination or multitude, added to
the base model to indicate graphics and/or preset adjustments for
specific customers: A through Z and 0 through 9. Prefixes are
separated from the base model by a dash (-) or slash (/).
For example: BK12-SG14 or MD2/SG14-J.
[3] Suffix H - Heater strip option.
|
|
Facility : Lyndonville, VT
|
Counter Top Rethermalizer[1] [2] [3] |
|
| CRTE | |
[1] May or may not have the following suffixes, in any combination or multitude, added to
the base model to indicate graphics and/or preset adjustments for specific customers: A
through Z and 0 through 9. Suffixes may or may not be separated from the base model by a
dash (-) or slash (/).
[2] May or may not have the following prefixes that define a customer order specification,
in any combination or multitude, added to the base model to indicate graphics and/or
preset adjustments for specific customers: A through Z and 0 through 9. Prefixes are
separated from the base model by a dash (-) or slash (/). For example: BK12-SG14 or
MD2/SG14-J.
[3] Rethermalizers are listed for use with prepackaged food only.
|
|
|
Pasta Perfect Cooker, Floor Type - Electric[1] [2] [4] [5] [6] [7] |
|
| PE14 | |
| PEN14 | |
| PPE14 | |
| PPEN14 | |
| PPSSPE14 | |
| SSPE14 | |
[1] May or may not have the following suffixes, in any combination or multitude, added to
the base model to indicate graphics and/or preset adjustments for specific customers: A
through Z and 0 through 9. Suffixes may or may not be separated from the base model by a
dash (-) or slash (/).
[2] May or may not have the following prefixes that define a customer order specification,
in any combination or multitude, added to the base model to indicate graphics and/or
preset adjustments for specific customers: A through Z and 0 through 9. Prefixes are
separated from the base model by a dash (-) or slash (/). For example: BK12-SG14 or
MD2/SG14-J.
[4] With or without the following suffixes:
C - Casters
D - Deep tank
F - Faucet
H - Boil/Simmer switch
HH - Digital solid state control
L - Basket lift
LL - Dual basket lift
M - Manual control
N - Instalation for rinse tank
V - Overflow drain manifold attachment
ZA, ZB, Z/2A, Z/2B: Different control options
[5] May have suffix J for electrical control.
[6] Beginning serial Number: 101184.
[7] Equipment may have optional regulated or non-regulated water fill system.
|
|
|
Pasta Perfect Cooker, Floor Type - Gas[1] [2] [4] [5] [6] [7] |
|
| PG14 | |
| PGN14 | |
| PPG14 | |
| PPGN14 | |
| PPSSPG14 | |
| SSPG14 | |
[1] May or may not have the following suffixes, in any combination or multitude, added to
the base model to indicate graphics and/or preset adjustments for specific customers: A
through Z and 0 through 9. Suffixes may or may not be separated from the base model by a
dash (-) or slash (/).
[2] May or may not have the following prefixes that define a customer order specification,
in any combination or multitude, added to the base model to indicate graphics and/or
preset adjustments for specific customers: A through Z and 0 through 9. Prefixes are
separated from the base model by a dash (-) or slash (/). For example: BK12-SG14 or
MD2/SG14-J.
[4] With or without the following suffixes:
C - Casters
D - Deep tank
F - Faucet
H - Boil/Simmer switch
HH - Digital solid state control
L - Basket lift
LL - Dual basket lift
M - Manual control
N - Instalation for rinse tank
V - Overflow drain manifold attachment
ZA, ZB, Z/2A, Z/2B: Different control options
[5] May have suffix J for electrical control.
[6] Beginning serial Number: 101184.
[7] Equipment may have optional regulated or non-regulated water fill system.
|
|
|
Rethermalizer[1] [2] [3] [5] |
|
| RTE14 | |
| RTE14S | |
| RTG14 | |
| RTG14S | |
| RTG14S-2 | |
| SRTE | |
| SRTG | |
[1] May or may not have the following suffixes, in any combination or multitude, added to
the base model to indicate graphics and/or preset adjustments for specific customers: A
through Z and 0 through 9. Suffixes may or may not be separated from the base model by a
dash (-) or slash (/).
[2] May or may not have the following prefixes that define a customer order specification,
in any combination or multitude, added to the base model to indicate graphics and/or
preset adjustments for specific customers: A through Z and 0 through 9. Prefixes are
separated from the base model by a dash (-) or slash (/). For example: BK12-SG14 or
MD2/SG14-J.
[3] Rethermalizers are listed for use with prepackaged food only.
[5] May have suffix J for electrical control.
|
|
Number of matching Manufacturers is 1
Number of matching Products is 497
Processing time was 0 seconds
