NSF Product and Service Listings
These NSF Official Listings are current as of Friday, December 20, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/food/Listings.asp?Standard=169&Company=37080&
NSF/ANSI 169
Special Purpose Food Equipment and Devices
Special Purpose Food Equipment and Devices
| Procon Products | |
| 869 Seven Oaks Boulevard | |
| Suite 120 | |
| Smyrna, TN 37167 | |
| United States | |
| 615-355-8000 |
Facility : # 1 Ireland
|
COMPONENTS: |
|
|
207mm Co Mount Rotary Vane Pump[1] |
|
| 10901 | |
| 10921 | |
| 71(1)(2)(3)(4)(5)(6)(7)(8)(9)(10)(11)(12) | |
[1] (1) Alphabetical or numeric character indicating series and housing type
(2) Alphabetical or numeric character indicating mounting and drive configuration
(3) Three digit number indicating flow rate in GPH
(4) Alphabetical character indicating elastomer
(5) Number indicating rotation
(6) Number indicating clearance
(7) Alphabetical or numeric character indicating valve type and configuration
(8) Alphabetical or numeric character indicating pressure range
(9) Alphabetical or numeric character indicating pins and vanes
(10) Reserved for future use
(11) Reserved for future use
(12) Three digit number indicating pressure setting in psi (optional)
|
|
|
215 Mag Drive Pump[2] |
|
| 319(1)(2)(3)(4)(5)(6)(7)(8)(9)(10)(11) | |
| 31A(1)(2)(3)(4)(5)(6)(7)(8)(9)(10)(11) | |
[2] Models beginning with 313, 314, 317 (207 MAG DRIVE), 318 (207 MAG DRIVE), 319 (215 MAG
DRIVE), 31A (215 MAG DRIVE), 31B (8 MM MAG DRIVE) and 31C (SERIES 3 CO MAG DRIVE) are
acceptable for alcohol less than or equal to 8%, aqueous non-acidic, aqueous acidic,
dairy and oil in water emulsions (e.g. potable water, coffee, carbonated water, milk and
syrup). Models beginning with 311, 312 AND 31D are acceptable with coffee, tea and
water.
(1) A, H, or J indicating magnetic coupler material
(2) Two or Three digit number indicating flow rate
(3) Alphabetical character indicating Elastomer type
(4) Number indicating rotation direction
(5) Number indicating internal pump clearance
(6) A, B, C, D, F, G, P, R, T, or X indicating valve type and configuration
(7) Alphabetical character indicating pressure range
(8) Number indicating vane material and pin
(9) X or A indicating adapter type
(10) Three digit number indicating motor information
(11) Value of 0-250 psi
|
|
|
Gear Pump[5] [Pb] |
|
| 10769 | |
| 10850 | |
| 10898 | |
| 10903 | |
| 10918 | |
| 10922 | |
| 10928 | |
| 10930 | |
| 10933 | |
| 10937 | |
| 10949 | |
| 10953 | |
| 5 (1)(2)(3)(4)(8)(5)(6)(7)(10)(9) | |
| 50001 | |
| 50002 | |
| 50003 | |
| 50013 | |
[5] Suffixes indicate the following:
(1) 1 or 3 indicating NSF approval
(2) Alphabetical character indicating motor power and voltage. If #9 is used, refer
to (9) for 3 digits motor designation.
(3) Number indicating cord type
(4) Alphabetical character indicating housing material and port configuration
(5) Alphabetical character indicating elastomer type
(6) Number indicating rotation direction
(7) Alphabetical character indicating pump style
(8) Alphabetical character indicating flow rate
(9) Three digits motor designation - used ONLY when (2) is #9
(10) First character indicates Clearance (S or X), Second character indicates Pressure
Range (F, G, or X)
[Pb] Product also evaluated and determined to possess weighted average lead content of
<=0.25% and complies with lead content requirements for “lead free” plumbing as defined
by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
Water Act.
|
|
|
Mag Drive Pump[2] |
|
| 10844 | |
| 10926 | |
| 31(1)(2)(3)(4)(5)(6)(7)(8)(9)(10)(11) | |
[2] Models beginning with 313, 314, 317 (207 MAG DRIVE), 318 (207 MAG DRIVE), 319 (215 MAG
DRIVE), 31A (215 MAG DRIVE), 31B (8 MM MAG DRIVE) and 31C (SERIES 3 CO MAG DRIVE) are
acceptable for alcohol less than or equal to 8%, aqueous non-acidic, aqueous acidic,
dairy and oil in water emulsions (e.g. potable water, coffee, carbonated water, milk and
syrup). Models beginning with 311, 312 AND 31D are acceptable with coffee, tea and
water.
(1) A, H, or J indicating magnetic coupler material
(2) Two or Three digit number indicating flow rate
(3) Alphabetical character indicating Elastomer type
(4) Number indicating rotation direction
(5) Number indicating internal pump clearance
(6) A, B, C, D, F, G, P, R, T, or X indicating valve type and configuration
(7) Alphabetical character indicating pressure range
(8) Number indicating vane material and pin
(9) X or A indicating adapter type
(10) Three digit number indicating motor information
(11) Value of 0-250 psi
|
|
|
Motor Pump - 3” Pumps[6] |
|
| 4(1)(2)(3)(4)(5)(6)(7)(8)(9)(10)[7] | |
| 41(1)(2)B(3)F(4)(5)(6)(7)(8) | |
| 41(1)(2)D(3)F(4)(5)(6)(7)(8) | |
| 43(1)(2)B(3)F(4)(5)(6)(7)(8) | |
| 43(1)(2)D(3)F(4)(5)(6)(7)(8) | |
[6] Models beginning with 41 or 43 are acceptable for potable water and syrup.
(1) Alphabetical character indicating motor type.
(2) Number indicating cord type.
(3) Alphabetical character indicating flow rate.
(4) Number indicating internal pump clearance.
(5) A, B, C, D, F, G, H, J, K, L, M, N, or P indicating valve type and configuration.
(6) Alphabetical character indicating pressure range.
(7) Digit indicating future use.
(8) Three digit number indicating alternate cord configuration.
[7] (1) Alphabetical or numerical character indicating agency listing
(2) Alphabetical or numerical character indicating motor type
(3) Alphabetical or numerical indicating cord type
(4) Alphabetical or numeric character indicating series and housing type
(4.1) Stainless Steel bodied pumps (letter E) pumps are approved for use in potable
water, carbonated water (aqueous non-acidic), alcohol less than 8%, coffee
(aqueous acidic), milk (dairy) and oil in water emulsions application
(5) Alphabetical or numerical character indicating flow rate
(6) Alphabetical or numerical character indicating elastomer type
(7) Alphabetical or numerical character indicating internal pump clearance
(8) Alphabetical or numerical character indicating valve type and configuration
(9) Alphabetical or numerical character indicating pressure range
(10) Alphabetical character indicating seal style
|
|
|
Motor Pump - Microvane Pumps[8] |
|
| 10831 | |
| 10904 | |
| 10916 | |
| 10927 | |
| 10936 | |
| 6(10)(1)(2)(A)(3)F(4)(5)(6)(7)(8)(9) | |
[8] Brass bodied models 61xxBxFxxxxxx and 61xxCxFxxxxxxare acceptable for potable water
contact ONLY. Stainless Steel bodied models designated by other numbers or letters
besides B and C are acceptable for potable water, carbonated water and syrup
(1) Alphabetical or numerical character indicating motor type. If #9 is used,
refer to (8) for 3 digits motor designation
(2) Alphabetical or numerical character indicating cord type.
(A) Alphabetical or numerical character indicating housing material and port
configuration.
(3) Alphabetical character indicating flow rate.
(4) Number indicating pump rotation direction.
(5) Alphabetical character indicating valve type and configuration.
(6) Alphabetical character indicating pressure range.
(7) Alphabetical character indicating pump configuration.
(8) Three digit (numerical or alphabetical) motor designation - used ONLY when (1)
is #9
(9) Three digit number indicating pressure setting in psi (optional), followed by
ONE
space after (8)
(10) 1 or 3 indicating NSF approval
|
|
|
Rotary Vane Pump - Brass and Stainless Steel Housing[9] |
|
| 10208 | |
| 10252 | |
| 10254 | |
| 10255 | |
| 10266 | |
| 10324 | |
| 10325 | |
| 10603[10] | |
| 10603 | |
| 10604[10] | |
| 10605[10] | |
| 10606[10] | |
| 10606 | |
| 10607[10] | |
| 10838 | |
| 10839 | |
| 10843 | |
| 10848 | |
| 10888 | |
| 10889 | |
| 10891 | |
| 10952 | |
| 10955 | |
| 11(7)(1)(2)(A)(3)(4)(5)(6)[11] [Pb] | |
| 11(7)(1)(2)(A)(3)(4)(5)(6)[11] | |
| 11(7)(1)(2)(A)(3)(4)(5)(6)[10] | |
| 14(7)(1)(2)(A)(3)(4)(5)(6)[11] | |
| 14(7)(1)(2)(A)(3)(4)(5)(6)[11] [Pb] | |
| 15(7)(1)(2)(A)(3)(4)(5)(6)[11] | |
| 15(7)(1)(2)(A)(3)(4)(5)(6)[11] [Pb] | |
[9] (1) Alphabetical character indicating mounting and drive configuration.
(2) Three digit number indicating flow rate in GPH.
(3) Number indicating rotation, slinger, vanes or vane-pins.
(4) Number indicating clearance.
(5) Alphabetical or numeric character indicating valve type and configuration.
(6) Alphabetical or numeric character indicating pressure range.
(7) Alphabetical or numeric character indicating series and housing type.
(A) Alphabetical character indicating elastomer.
[10] Stainless Steel pumps are acceptable for all food types.
[11] Brass bodied pumps for use with coffee, tea, or potable water only.
[Pb] Product also evaluated and determined to possess weighted average lead content of
<=0.25% and complies with lead content requirements for “lead free” plumbing as defined
by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
Water Act.
|
|
[3] Models beginning with 21 and 23 are acceptable for potable water, carbonated water, and
syrup.
(1) Alphabetical character indicating motor type.
(2) Number indicating cord type.
(3) Alphabetical character indicating motor capacitor location.
(4) Alphabetical character indicating housing description.
(5) Alphabetical character indicating flow rate.
(6) Number indicating internal pump clearance.
(7) A,B,C,D,F, or G indicating valve type and configuration.
(8) Alphabetical character indicating pressure range.
(9) Digit indicating future use.
(10) Three digit number indicating alternate cord configuration.
[4] Pumps are intended to be installed in an unexposed non-food zone.
Facility : Guangdong, China
|
COMPONENTS: |
|
|
Gear Pump[5] [Pb] |
|
| 5 (1)(2)(3)(4)(8)(5)(6)(7)(10)(9) | |
[5] Suffixes indicate the following:
(1) 1 or 3 indicating NSF approval
(2) Alphabetical character indicating motor power and voltage. If #9 is used, refer to
(9) for 3 digits motor designation.
(3) Number indicating cord type
(4) Alphabetical character indicating housing material and port configuration
(5) Alphabetical character indicating elastomer type
(6) Number indicating rotation direction
(7) Alphabetical character indicating pump style
(8) Alphabetical character indicating flow rate
(9) Three digits motor designation - used ONLY when (2) is #9
(10) First character indicates Clearance (S or X), Second character indicates Pressure
Range (F, G, or X)
[Pb] Product also evaluated and determined to possess weighted average lead content of
<=0.25% and complies with lead content requirements for “lead free” plumbing as defined
by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
Water Act.
|
|
|
Rotary Vane Pump - Brass and Stainless Steel Housing[9] |
|
| 11(7)(1)(2)(A)(3)(4)(5)(6)[10] | |
| 11(7)(1)(2)(A)(3)(4)(5)(6)[11] [Pb] | |
| 11(7)(1)(2)(A)(3)(4)(5)(6)[11] | |
| 14(7)(1)(2)(A)(3)(4)(5)(6)[11] | |
| 14(7)(1)(2)(A)(3)(4)(5)(6)[11] [Pb] | |
| 15(7)(1)(2)(A)(3)(4)(5)(6)[11] [Pb] | |
| 15(7)(1)(2)(A)(3)(4)(5)(6)[11] | |
[9] (1) Alphabetical character indicating mounting and drive configuration.
(2) Three digit number indicating flow rate in GPH.
(3) Number indicating rotation, slinger, vanes or vane-pins.
(4) Number indicating clearance.
(5) Alphabetical or numeric character indicating valve type and configuration.
(6) Alphabetical or numeric character indicating pressure range.
(7) Alphabetical or numeric character indicating series and housing type.
(A) Alphabetical character indicating elastomer.
[10] Stainless Steel pumps are acceptable for all food types.
[11] Brass bodied pumps for use with coffee, tea, or potable water only.
[Pb] Product also evaluated and determined to possess weighted average lead content of
<=0.25% and complies with lead content requirements for “lead free” plumbing as defined
by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
Water Act.
|
|
Facility : Sonora, Mexico
|
COMPONENTS: |
|
|
207mm Co Mount Rotary Vane Pump[1] |
|
| 71(1)(2)(3)(4)(5)(6)(7)(8)(9)(10)(11)(12) | |
[1] (1) Alphabetical or numeric character indicating series and housing type
(2) Alphabetical or numeric character indicating mounting and drive configuration
(3) Three digit number indicating flow rate in GPH
(4) Alphabetical character indicating elastomer
(5) Number indicating rotation
(6) Number indicating clearance
(7) Alphabetical or numeric character indicating valve type and configuration
(8) Alphabetical or numeric character indicating pressure range
(9) Alphabetical or numeric character indicating pins and vanes
(10) Reserved for future use
(11) Reserved for future use
(12) Three digit number indicating pressure setting in psi (optional)
|
|
|
215 Mag Drive Pump[2] |
|
| 319(1)(2)(3)(4)(5)(6)(7)(8)(9)(10)(11) | |
| 31A(1)(2)(3)(4)(5)(6)(7)(8)(9)(10)(11) | |
[2] Models beginning with 313, 314, 317 (207 MAG DRIVE), 318 (207 MAG DRIVE), 319 (215 MAG
DRIVE), 31A (215 MAG DRIVE), 31B (8 MM MAG DRIVE) and 31C (SERIES 3 CO MAG DRIVE) are
acceptable for alcohol less than or equal to 8%, aqueousnon-acidic, aqueous acidic,
dairy and oil in water emulsions (e.g. potable water, coffee, carbonated water, milk and
syrup). Models beginning with 311, 312 AND 31D are acceptable with coffee, tea and
water.
(1) A, H, or J indicating magnetic coupler material
(2) Two or Three digit number indicating flow rate
(3) Alphabetical character indicating Elastomer type
(4) Number indicating rotation direction
(5) Number indicating internal pump clearance
(6) A, B, C, D, F, G, P, R, T, or X indicating valve type and configuration
(7) Alphabetical character indicating pressure range
(8) Number indicating vane material and pin
(9) X or A indicating adapter type
(10) Three digit number indicating motor information
(11) Value of 0-250 psi
|
|
|
Gear Pump[5] [Pb] |
|
| 10769 | |
| 10937 | |
| 10949 | |
| 10953 | |
| 5 (1)(2)(3)(4)(8)(5)(6)(7)(10)(9) | |
| 50001 | |
| 50002 | |
| 50003 | |
| 50008 | |
| 50013 | |
| 50014 | |
[5] Suffixes indicate the following:
(1) 1 or 3 indicating NSF approval
(2) Alphabetical character indicating motor power and voltage. If #9 is used, refer
to (9) for 3 digits motor designation.
(3) Number indicating cord type
(4) Alphabetical character indicating housing material and port configuration
(5) Alphabetical character indicating elastomer type
(6) Number indicating rotation direction
(7) Alphabetical character indicating pump style
(8) Alphabetical character indicating flow rate
(9) Three digits motor designation - used ONLY when (2) is #9
(10) First character indicates Clearance (S or X), Second character indicates Pressure
Range (F, G, or X)
[Pb] Product also evaluated and determined to possess weighted average lead content of
<=0.25% and complies with lead content requirements for “lead free” plumbing as defined
by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
Water Act.
|
|
|
Mag Drive Pump[2] |
|
| 31(1)(2)(3)(4)(5)(6)(7)(8)(9)(10)(11) | |
[2] Models beginning with 313, 314, 317 (207 MAG DRIVE), 318 (207 MAG DRIVE), 319 (215 MAG
DRIVE), 31A (215 MAG DRIVE), 31B (8 MM MAG DRIVE) and 31C (SERIES 3 CO MAG DRIVE) are
acceptable for alcohol less than or equal to 8%, aqueousnon-acidic, aqueous acidic,
dairy and oil in water emulsions (e.g. potable water, coffee, carbonated water, milk and
syrup). Models beginning with 311, 312 AND 31D are acceptable with coffee, tea and
water.
(1) A, H, or J indicating magnetic coupler material
(2) Two or Three digit number indicating flow rate
(3) Alphabetical character indicating Elastomer type
(4) Number indicating rotation direction
(5) Number indicating internal pump clearance
(6) A, B, C, D, F, G, P, R, T, or X indicating valve type and configuration
(7) Alphabetical character indicating pressure range
(8) Number indicating vane material and pin
(9) X or A indicating adapter type
(10) Three digit number indicating motor information
(11) Value of 0-250 psi
|
|
|
Motor Pump - 3” Pumps[6] |
|
| 4(1)(2)(3)(4)(5)(6)(7)(8)(9)(10)[7] | |
| 41(1)(2)B(3)F(4)(5)(6)(7)(8) | |
| 41(1)(2)D(3)F(4)(5)(6)(7)(8) | |
| 43(1)(2)B(3)F(4)(5)(6)(7)(8) | |
| 43(1)(2)D(3)F(4)(5)(6)(7)(8) | |
[6] Models beginning with 41 or 43 are acceptable for potable water and syrup.
(1) Alphabetical character indicating motor type.
(2) Number indicating cord type.
(3) Alphabetical character indicating flow rate.
(4) Number indicating internal pump clearance.
(5) A, B, C, D, F, G, H, J, K, L, M, N, or P indicating valve type and configuration.
(6) Alphabetical character indicating pressure range.
(7) Digit indicating future use.
(8) Three digit number indicating alternate cord configuration.
[7] (1) Alphabetical or numerical character indicating agency listing
(2) Alphabetical or numerical character indicating motor type
(3) Alphabetical or numerical indicating cord type
(4) Alphabetical or numeric character indicating series and housing type
(4.1) Stainless Steel bodied pumps (letter E) pumps are approved for use in potable
water, carbonated water (aqueous non-acidic), alcohol less than 8%, coffee
(aqueous acidic), milk (dairy) and oil in water emulsions application
(5) Alphabetical or numerical character indicating flow rate
(6) Alphabetical or numerical character indicating elastomer type
(7) Alphabetical or numerical character indicating internal pump clearance
(8) Alphabetical or numerical character indicating valve type and configuration
(9) Alphabetical or numerical character indicating pressure range
(10) Alphabetical character indicating seal style
|
|
|
Motor Pump - Microvane Pumps[8] |
|
| 6(10)(1)(2)(A)(3)F(4)(5)(6)(7)(8)(9) | |
[8] Brass bodied models 61xxBxFxxxxxx and 61xxCxFxxxxxxare acceptable for potable water
contact ONLY. Stainless Steel bodied models designated by other numbers or letters
besides B and C are acceptable for potable water, carbonated water and syrup.
(1) Alphabetical or numerical character indicating motor type. If #9 is used, refer to
(8) for 3 digits motor designation
(2) Alphabetical or numerical character indicating cord type.
(A) Alphabetical or numerical character indicating housing material and port
configuration.
(3) Alphabetical character indicating flow rate.
(4) Number indicating pump rotation direction.
(5) Alphabetical character indicating valve type and configuration.
(6) Alphabetical character indicating pressure range.
(7) Alphabetical character indicating pump configuration.
(8) Three digit (numerical or alphabetical) motor designation - used ONLY when (1) is
#9
(9) Three digit number indicating pressure setting in psi (optional), followed by ONE
space after (8)
(10) 1 or 3 indicating NSF approval
|
|
|
Rotary Vane Pump - Brass and Stainless Steel Housing[9] |
|
| 10252 | |
| 10603[10] | |
| 10604[10] | |
| 10605[10] | |
| 10606[10] | |
| 10607[10] | |
| 10952 | |
| 10955 | |
| 11(7)(1)(2)(A)(3)(4)(5)(6)[10] | |
| 11(7)(1)(2)(A)(3)(4)(5)(6)[11] | |
| 11(7)(1)(2)(A)(3)(4)(5)(6)[11] [Pb] | |
| 14(7)(1)(2)(A)(3)(4)(5)(6)[11] | |
| 14(7)(1)(2)(A)(3)(4)(5)(6)[11] [Pb] | |
| 15(7)(1)(2)(A)(3)(4)(5)(6)[11] [Pb] | |
| 15(7)(1)(2)(A)(3)(4)(5)(6)[11] | |
[9] (1) Alphabetical character indicating mounting and drive configuration.
(2) Three digit number indicating flow rate in GPH.
(3) Number indicating rotation, slinger, vanes or vane-pins.
(4) Number indicating clearance.
(5) Alphabetical or numeric character indicating valve type and configuration.
(6) Alphabetical or numeric character indicating pressure range.
(7) Alphabetical or numeric character indicating series and housing type.
(A) Alphabetical character indicating elastomer.
[10] Stainless Steel pumps are acceptable for all food types.
[11] Brass bodied pumps for use with coffee, tea, or potable water only.
[Pb] Product also evaluated and determined to possess weighted average lead content of
<=0.25% and complies with lead content requirements for “lead free” plumbing as defined
by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
Water Act.
|
|
[3] Models beginning with 21 and 23 are acceptable for potable water, carbonated water, and
syrup.
(1) Alphabetical character indicating motor type.
(2) Number indicating cord type.
(3) Alphabetical character indicating motor capacitor location.
(4) Alphabetical character indicating housing description.
(5) Alphabetical character indicating flow rate.
(6) Number indicating internal pump clearance.
(7) A, B, C, D, F, or G indicating valve type and configuration.
(8) Alphabetical character indicating pressure range.
(9) Digit indicating future use.
(10) Three digit number indicating alternate cord configuration.
[4] Pumps are intended to be installed in an unexposed non-food zone.
Number of matching Manufacturers is 1
Number of matching Products is 110
Processing time was 0 seconds
