NSF Product and Service Listings
These NSF Official Listings are current as of Tuesday, December 16, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/food/Listings.asp?Standard=002&Company=3T370&
NSF/ANSI 2
Food Equipment
Food Equipment
| Carel USA Inc. | |
| 385 South Oak Street | |
| Manheim, PA 17545 | |
| United States | |
| 717-664-0500 | |
| Visit this company's website |
Facility : Valinhos, Brazil
|
COMPONENTS: |
|
|
NTC Sensor Temperature Probe[1] |
|
| NTC015WH03 | |
| NTC030WH03 | |
| NTC060WH03 | |
| NTCR31WH01 | |
| NTCR31WH04 | |
| NTCR33WH01 | |
| NTCR33WH04 | |
[1] Two digit code for customer identification or specific applications. |
|
|
Refrigerator/Freezer/Heating Temperature Controller Thermometer |
|
| IR(1)(2)(3)(4)(5)(6)(7)(8), Dial: -58°F to 120°F/-50°C to 49°C[2] | |
| IX(1)(2)(3)(4)(5)(6)(7)(8), Dial: -58°F to 120°F/-50°C to 49°C[2] | |
| PB(1)(2)(3)(4)(5)(6)(7)(8), -58°F to 302°F/-50°C to 150°C[4] [5] [6] | |
| PJEZ(1)(2)(3)(4)(5)(6)(7)(8), -58°F to 194°F/-50°C to 90°C[3] | |
| PQ(1)(2)(3)(4)(5)(6)(7)(8), -58°F to 194°F/-50°C to 90°C[3] | |
| PX(1)(2)(3)(4)(5)(6)(7)(8), -58°F to 302°F/-50°C to 150°C[4] [5] [6] | |
[2] (1) Carel or customer version:
33 - Standard Carel version
EV - Standard Carel IR33+ version
xx - Any two alphanumeric characters for customer identification
(2) Number of relays:
C - Four relays: compressor, defrost, fan, and auxiliary
F - Three relays: compressor, defrost, and fan
M - Zero relay
S - One relay: compressor
Y - Two relays: compressor and defrost
(3) Type of temperature probe input: 0 - NTC
(4) Main voltage:
0 - 12 V ac or 13-15 Vdc, class 2 supplied
A - 115 V ac, model provided with transformer - not available for relay code C
E - 230 V ac, model provided with transformer - not available for relay code C
H - 115/230 V ac, model provided with switching power supply module - not
available for relay code M
L - 24 V ac or 15-30 Vdc, class 2 supplied
(5) Model option:
A - Provided with auxiliary relay
B - Option C and R
C - Provided with time clock
E - Option C and H
F - Option C, H, and R
G - Option A and H
H - Provided with relay 2HP
I - Option H and R
K - Option A, H, and R
L - Option A and C
M - Option A and R
N - Standard
O - Option A, C, and H
P - Provided with relay 16 A
Q - Option P and R
R - Provided with infrared receiver
S - Option C and P
T - Option A, C, and R
U - Option C, P, and R
V - Option A and P
W - Option A, C, H, and R
X - Option A, P, and R
Y - Option A, C, and P
Z - Option A, C, P, and R
(6) Kind of terminal blocks:
0/A/C/E/G - Screw terminal blocks
1 - Quick-connect tabs for relay outputs and plug-in terminal blocks
for IN/OUT signals
2/D/H - Plug-in terminal blocks
3 - Quick-connect tabs for relay outputs and screw terminal blocks
for IN/OUT signals
5 - Vertical screw terminal blocks
6 - As 1, back mounting version
7 - As 2, back mounting version
8 - As 3, back mounting version
B/F - Screw terminal blocks for relay outputs and plug-in terminal
blocks for IN/OUT signals
(7) Personalization identifier: 0 - Standard, x - One alphanumeric character
(8) Shipping packaging information:
Blank - Single package
1/3/5 - Multiple package
1/5 - Multiple package
K - Kit package with accessories
[3] (1) Note: The first four characters 'PJEZ' represent the standard Carel version;
or may be 'PZXX' where 'XX' represents a two digit customer code for special
application software or aesthetical personalization; or may be 'PJYY' where 'YY'
represents any two alphanumeric characters for CAREL specific application
software; or may be "PQXX" where "xx" represents any two alphanumeric characters
for customer identification for specific application software or aesthetical
personalization. ‘Aesthetical personalization’: includes graphics; the color of
the logo on the plastic frame, a different color plastic, different color LEDs or
similar changes. The PQxx contains sealed relays and is to be used in applications
with flammable refrigerants.
(2) Numebr of relays, alpha or numeric character
(3) Type of temperature probe input/version
0 - NTC probe - buzzer alarm
1 - NTC probe
2 - NTC probe - HT range +40 - +150C - buzzer
3 - NTC probe - HT range +40 - +150C
8 - NTC probe - buzzer alarm - "SPLIT" version
N - NTC probe - smaller "Compact" version
(4) Model option: Zero for Standard or alpha or numeric character for electronic
and Bluetooth options
(5) Voltage: alpha or numeric character for voltage
(6) Connections type / serial interface: alpha or numeric character
(7) Personalized identifier: any alpha or numeric character for alternate set point,
color, etc.
(8) Packaging: Blank -Standard Carel stand-alone packaging, K- Kit version for
multiple delivery, x - Any alpha numeric character indicating personalized
packaging.
[4] (1) 2-digit alphanumeric suffix indicating Carel standard version or customer version
00 - Standard CAREL Power Compact
01 - Standard CAREL Power Compact
B1 - CAREL Battery Backup
B2 - EASY BLAST CHILLER
EV - Standard CAREL
F3 - VCC
Any two alphanumeric characters for customer identification
(2) Model
C - Four relays: compressor, defrost, fan, and auxiliary
D - Driver for external SSR and 3 standard relays (2HP, 8A, 8A)
F - Three relays: compressor, defrost, and fan
H - Five relays: Compressor, defrost, fan, two auxiliary
(3) Type of Probe Input
0 - NTC probes
8 - NTC: UL label
9 - NTC: alternate UL label
(4) Power Supply
A - 115VAC (model S, Y, F)
E - 230VAC (model S, Y, F)
H - 115/230 VAC Switching (model F, C, H)
S - 115/230VAC Switching (SMALL)
0 - 12VAC
(5) Model Options
A - One Auxiliary Relay
B - Option C and R
C - Real Time Clock (RTC)
L - Option A and C
M - IR receiver and Auxiliary Relay
N - No Options
P - 16A, 8A, 8A relays
Q - Option P and R
R - IR Receiver
S - Option C and P
T - Option A, C, and R
U - Option C, P, and R
V - Option A and P
X - Option A, P, and R
Y - Option A, C, and P
Z - Option A, C, P, and R
(6) Connections, Front, and Mounting Options
Feature A - Panel mounting from rear with polycarbonate on the front.
Feature B - Panel mounting from rear with remote membrane keypad on the front.
0 - No Option
1 - Faston (Easy Wide) same as E, panel mounting from rear, feature B
2 - Screw Terminals (Easy Wide) same as F, panel mounting from rear, feature B
3 - Screw Terminals (IR33+ Wide) same as G, panel mounting from rear, feature B
4 - Faston, Extra probes (IR33+ Wide) same as H, panel mounting from rear,
feature B
5 - Removebale Terminals (IR33+ Wide) same as I, panel mounting from rear,
feature B
6 - Same as L (IR33+ Wide), panel mounting from rear, feature B
7 - Same as M (IR33+ Wide), panel mounting from rear, feature B
8 - Same as N (IR33+ Wide), panel mounting from rear, feature B
A - Screw Terminals (Easy Wide)
B - Faston, Extra probes (Easy Wide)
C - Removeable Terminals (Easy Wide)
D - Faston outputs, Screw terminals Inputs (Easy Wide)
E - Faston (Easy Wide)
F - Screw Terminals (Easy Wide)
G - Scew Terminals (IR33+ Wide)
H - Faston, Extra probes (IR33+ Wide)
I - Removeable Terminals (IR33+ Wide)
L - Faston outputs, Screw Term. Inputs (IR33+ Wide)
M - Faston (IR33+ Wide)
N - Screw Terminals (IR33+ Wide)
P - Same as A (Easy Wide), panel mounting from rear, feature A
R - Same as B (Easy Wide), panel mounting from rear, feature A
S - Same as C (Easy Wide), panel mounting from rear, feature A
T - Same as D (Easy Wide), panel mounting from rear, feature A
U - Same as E (Easy Wide), panel mounting from rear, feature A
V - Same as F (Easy Wide), panel mounting from rear, feature A
W - Same as P (Easy Wide), panel mounting from rear, feature B
X - Same as R (Easy Wide), panel mounting from rear, feature B
Y - Same as S (Easy Wide), panel mounting from rear, feature B
Z - Same as T (Easy Wide), panel mounting from rear, feature B
(7) Display color
A - Blue Display
G - Green Display
W - White Display
X - One numeric character as a personalization identifier
(8) Packaging/Kitting
Blank - Single package
1 - Tool for multiple package
K - Custom Kit
[5] With beginning date code of 2016-06-06
[6] Temperature ranges for this thermometer are dependent upon the type of optional probe
used
|
|
Facility : Jiangsu Province, China
|
COMPONENTS: |
|
|
Basic Control Unit[8] |
|
| BCU(1)(2)(3)(4)(5)(6)(7), -20 to 60°C | |
[8] (1) Two numerical digits describing available Mechanical Housing options (Module H):
01-03 - Panel housing SMALL - Front Mounting (71x29mm)
04-06 - Panel housing LARGE - Front Mounting (138x29mm)
07 - Panel housing SMALL – Rear Mounting (71x29mm)
(2) Two numerical digits describing available options for the Distinctive board -
ELECTRONICS - MAIN PART (Module M):
01-04 - Small Long enclosure, 115/230 Vac, 4R
05-08 - Large Long enclosure, 115/230 Vac, 6R
09-13, 17-18 - SMALL HMI enclosure, 12 Vdc
14-16 - LARGE HMI enclosure, 12 Vdc
(3) Two numerical digits describing available Outputs and Relays options for the
Distinctive board (Module O):
00 - NONE (No Outputs or Relays)
01 - Small Long enclosure, 1 relay
02 - Small Long enclosure, 2 relays
03 - Small Long enclosure, 3 relays
04 - Small Long enclosure, 4 relays
05-06 - Large Long enclosure, 2 relays
07-08 - Large Long enclosure, 3 relays
09-10 - Large Long enclosure, 4 relays
11-12 - Large Long enclosure, 5 relays
13-14 - Large Long enclosure, 6 relays
(4) Two numerical digits describing options for Distinctive board - TERMINALS
(Module T):
00 - NONE (no terminals)
01-14 - Small Long enclosure (4R), describes terminals for Power supply, inputs
and outputs
15-26 - Large Long enclosure (6R), describes teminals for Power supply, inputs
and outputs
27-33 - Small HMI enclosure, describes terminals for Serial, inputs and free-fit
resistive
34-40 - Large HMI enclosure, describes terminals for serial, inputs and free-fit
resistive
41-47 - Small HMI enclosure, describes terminals for serial, inputs and free-fit
resistive
(5) Two numerical digits describing options for Core board (Module C):
01-11 - Small - describes Processor and Peripherals
12-21 - Large - describes Processor and Peripherals
(6) Two numerical digits describing options for Extra Functional Module board
(Module X):
00 - NONE
01-09 - Serial comm, Input/Output Interface and Battery Backup Options
(7) Two alpha or numeric digits describing Production Features options, such as
Coating and Production facility:
00 - NONE
(01) - Conformal Coating
(02) - Electronic Grade Coating (3M)
(IT) - Italy Manufacturing
(CH) - China Manufacturing
(HR) - Croatia Manufacturing
|
|
|
NTC Sensor Temperature Probe[1] |
|
| NTC015WH03 | |
| NTC030WH03 | |
| NTC060WH03 | |
| NTCR31WH01 | |
| NTCR31WH04 | |
| NTCR33WH01 | |
| NTCR33WH04 | |
[1] Beginning date code October 20, 2008. |
|
|
Refrigerator/Freezer/Heating Temperature Controller Thermometer |
|
| IR(1)(2)(3)(4)(5)(6)(7)(8), Dial: -58°F to 120°F/-50°C to 49°C[2] [3] | |
| IX(1)(2)(3)(4)(5)(6)(7)(8), Dial: -58°F to 120°F/-50°C to 49°C[2] [3] | |
| PB(1)(2)(3)(4)(5)(6)(7)(8), -58°F to 302°F/-50°C to 150°C[5] [6] [7] | |
| PJEZ(1)(2)(3)(4)(5)(6)(7)(8), -58°F to 194°F/-50°C to 90°C[1] [4] | |
| PQ(1)(2)(3)(4)(5)(6)(7)(8), -58°F to 194°F/-50°C to 90°C[1] [4] | |
| PX(1)(2)(3)(4)(5)(6)(7)(8), -58°F to 302°F/-50°C to 150°C[5] [6] [7] | |
[1] Beginning date code October 20, 2008.
[2] With beginning date code of 2007-02-15.
[3] (1) Carel or customer version:
33 - Standard Carel version+
EV - Standard Carel IR33+ version
xx - Any two alphanumeric characters for customer identification
(2) Number of relays:
C - Four relays: compressor, defrost, fan, and auxiliary
F - Three relays: compressor, defrost, and fan
M - Zero relay
S - One relay: compressor
Y - Two relays: compressor and defrost
(3) Type of temperature probe input: 0 - NTC
(4) Main voltage:
0 - 12 V ac or 13-15 Vdc, class 2 supplied
A - 115 V ac, model provided with transformer - not available for relay code C
E - 230 V ac, model provided with transformer - not available for relay code C
H - 115/230 V ac, model provided with switching power supply module - not
available for relay code M
L - 24 V ac or 15-30 Vdc, class 2 supplied
(5) Model option:
A - Provided with auxiliary relay
B - Option C and R
C - Provided with time clock
E - Option C and H
F - Option C, H, and R
G - Option A and H
H - Provided with relay 2HP
I - Option H and R
K - Option A, H, and R
L - Option A and C
M - Option A and R
N - Standard
O - Option A, C, and H
P - Provided with relay 16 A
Q - Option P and R
R - Provided with infrared receiver
S - Option C and P
T - Option A, C, and R
U - Option C, P, and R
V - Option A and P
W - Option A, C, H, and R
X - Option A, P, and R
Y - Option A, C, and P
Z - Option A, C, P, and R
(6) Kind of terminal blocks:
0/A/C/E/G - Screw terminal blocks
1 - Quick-connect tabs for relay outputs and plug-in terminal blocks
for IN/OUT signals
2/D/H - Plug-in terminal blocks
3 - Quick-connect tabs for relay outputs and screw terminal blocks
for IN/OUT signals
5 - Vertical screw terminal blocks
6 - As 1, back mounting version
7 - As 2, back mounting version
8 - As 3, back mounting version
B/F - Screw terminal blocks for relay outputs and plug-in terminal
blocks for IN/OUT signals
(7) Personalization identifier: 0 - Standard, x - One alphanumeric character
(8) Shipping packaging information:
Blank - Single package
1/3/5 - Multiple package
1/5 - Multiple package
K - Kit package with accessories
[4] (1) Note: The first four characters 'PJEZ' represent the standard Carel version;
or may be 'PZXX' where 'XX' represents a two digit customer code for special
application software or aesthetical personalization; or may be 'PJYY' where
'YY' represents any two alphanumeric characters for CAREL specific
application software; or may be "PQXX" where "xx" represents any two alphanumeric
characters for customer identification for specific application software or
aesthetical personalization. ‘Aesthetical personalization’: includes graphics; the
color of the logo on the plastic frame, a different color plastic, different color
LEDs or similar changes. The PQxx contains sealed relays and is to be used in
applications with flammable refrigerants.
(2) Numebr of relays, alpha or numeric character
(3) Type of temperature probe input/version
0 - NTC probe - buzzer alarm
1 - NTC probe
2 - NTC probe - HT range +40 - +150C - buzzer
3 - NTC probe - HT range +40 - +150C
8 - NTC probe - buzzer alarm - "SPLIT" version
N - NTC probe - smaller "Compact" version
(4) Model option: Zero for Standard or alpha or numeric character for electronic and
Bluetooth options
(5) Voltage: alpha or numeric character for voltage
(6) Connections type / serial interface: alpha or numeric character
(7) Personalized identifier: any alpha or numeric character for alternate set point,
color, etc.
(8) Packaging: Blank -Standard Carel stand-alone packaging, K- Kit version for
multiple delivery, x - Any alpha numeric character indicating personalized
packaging.
[5] (1) 2-digit alphanumeric suffix indicating Carel standard version or customer version
00 - Standard CAREL Power Compact
01 - Standard CAREL Power Compact
B1 - CAREL Battery Backup
B2 - EASY BLAST CHILLER
EV - Standard CAREL
F3 - VCC
Any two alphanumeric characters for customer identification
(2) Model
C - Four relays: compressor, defrost, fan, and auxiliary
D - Driver for external SSR and 3 standard relays (2HP, 8A, 8A)
F - Three relays: compressor, defrost, and fan
H - Five relays: Compressor, defrost, fan, two auxiliary
(3) Type of Probe Input
0 - NTC probes
8 - NTC: UL label
9 - NTC: alternate UL label
(4) Power Supply
A - 115VAC (model S, Y, F)
E - 230VAC (model S, Y, F)
H - 115/230 VAC Switching (model F, C, H)
S - 115/230VAC Switching (SMALL)
0 - 12VAC
(5) Model Options
A - One Auxiliary Relay
B - Option C and R
C - Real Time Clock (RTC)
L - Option A and C
M - IR receiver and Auxiliary Relay
N - No Options
P - 16A, 8A, 8A relays
Q - Option P and R
R - IR Receiver
S - Option C and P
T - Option A, C, and R
U - Option C, P, and R
V - Option A and P
X - Option A, P, and R
Y - Option A, C, and P
Z - Option A, C, P, and R
(6) Connections, Front, and Mounting Options
Feature A - Panel mounting from rear with polycarbonate on the front.
Feature B - Panel mounting from rear with remote membrane keypad on the front.
0 - No Option
1 - Faston (Easy Wide) same as E, panel mounting from rear, feature B
2 - Screw Terminals (Easy Wide) same as F, panel mounting from rear, feature B
3 - Screw Terminals (IR33+ Wide) same as G, panel mounting from rear, feature B
4 - Faston, Extra probes (IR33+ Wide) same as H, panel mounting from rear, feature
B
5 - Removebale Terminals (IR33+ Wide) same as I, panel mounting from rear, feature
B
6 - Same as L (IR33+ Wide), panel mounting from rear, feature B
7 - Same as M (IR33+ Wide), panel mounting from rear, feature B
8 - Same as N (IR33+ Wide), panel mounting from rear, feature B
A - Screw Terminals (Easy Wide)
B - Faston, Extra probes (Easy Wide)
C - Removeable Terminals (Easy Wide)
D - Faston outputs, Screw terminals Inputs (Easy Wide)
E - Faston (Easy Wide)
F - Screw Terminals (Easy Wide)
G - Scew Terminals (IR33+ Wide)
H - Faston, Extra probes (IR33+ Wide)
I - Removeable Terminals (IR33+ Wide)
L - Faston outputs, Screw Term. Inputs (IR33+ Wide)
M - Faston (IR33+ Wide)
N - Screw Terminals (IR33+ Wide)
P - Same as A (Easy Wide), panel mounting from rear, feature A
R - Same as B (Easy Wide), panel mounting from rear, feature A
S - Same as C (Easy Wide), panel mounting from rear, feature A
T - Same as D (Easy Wide), panel mounting from rear, feature A
U - Same as E (Easy Wide), panel mounting from rear, feature A
V - Same as F (Easy Wide), panel mounting from rear, feature A
W - Same as P (Easy Wide), panel mounting from rear, feature B
X - Same as R (Easy Wide), panel mounting from rear, feature B
Y - Same as S (Easy Wide), panel mounting from rear, feature B
Z - Same as T (Easy Wide), panel mounting from rear, feature B
(7) Display color
A - Blue Display
G - Green Display
W - White Display
X - One numeric character as a personalization identifier
(8) Packaging/Kitting
Blank - Single package
1 - Tool for multiple package
K - Custom Kit
[6] With beginning date code of 2016-06-06
[7] Temperature ranges for this thermometer are dependent upon the type of optional probe
used
|
|
Facility : Labin, Croatia
|
COMPONENTS: |
|
|
Basic Control Unit[1] |
|
| BCU(1)(2)(3)(4)(5)(6)(7), -20 to 60°C | |
[1] (1) Two numerical digits describing available Mechanical Housing options (Module H):
01-03 - Panel housing SMALL - Front Mounting (71x29mm)
04-06 - Panel housing LARGE - Front Mounting (138x29mm)
07 - Panel housing SMALL – Rear Mounting (71x29mm)
(2) Two numerical digits describing available options for the Distinctive board -
ELECTRONICS - MAIN PART (Module M):
01-04 - Small Long enclosure, 115/230 Vac, 4R
05-08 - Large Long enclosure, 115/230 Vac, 6R
09-13, 17-18 - SMALL HMI enclosure, 12 Vdc
14-16 - LARGE HMI enclosure, 12 Vdc
(3) Two numerical digits describing available Outputs and Relays options for the
Distinctive board (Module O):
00 - NONE (No Outputs or Relays)
01 - Small Long enclosure, 1 relay
02 - Small Long enclosure, 2 relays
03 - Small Long enclosure, 3 relays
04 - Small Long enclosure, 4 relays
05-06 - Large Long enclosure, 2 relays
07-08 - Large Long enclosure, 3 relays
09-10 - Large Long enclosure, 4 relays
11-12 - Large Long enclosure, 5 relays
13-14 - Large Long enclosure, 6 relays
(4) Two numerical digits describing options for Distinctive board - TERMINALS
(Module T):
00 - NONE (no terminals)
01-14 - Small Long enclosure (4R), describes terminals for Power supply, inputs
and outputs
15-26 - Large Long enclosure (6R), describes teminals for Power supply, inputs
and outputs
27-33 - Small HMI enclosure, describes terminals for Serial, inputs and free-fit
resistive
34-40 - Large HMI enclosure, describes terminals for serial, inputs and free-fit
resistive
41-47 - Small HMI enclosure, describes terminals for serial, inputs and free-fit
resistive
(5) Two numerical digits describing options for Core board (Module C):
01-11 - Small - describes Processor and Peripherals
12-21 - Large - describes Processor and Peripherals
(6) Two numerical digits describing options for Extra Functional Module board
(Module X):
00 - NONE
01-09 - Serial comm, Input/Output Interface and Battery Backup Options
(7) Two alpha or numeric digits describing Production Features options, such as
Coating and Production facility:
00 - NONE
(01) - Conformal Coating
(02) - Electronic Grade Coating (3M)
(IT) - Italy Manufacturing
(CH) - China Manufacturing
(HR) - Croatia Manufacturing
|
|
|
NTC Sensor Temperature Probe[2] |
|
| NTC015WH03 | |
| NTC030WH03 | |
| NTC060WH03 | |
| NTCR31WH01 | |
| NTCR31WH04 | |
| NTCR33WH01 | |
| NTCR33WH04 | |
[2] Beginning date code December 12, 2018. |
|
|
Refrigerator/Freezer/Heating Temperature Controller Thermometer |
|
| IR(1)(2)(3)(4)(5)(6)(7)(8), Dial: -58°F to 120°F/-50°C to 49°C[3] [4] | |
| IX(1)(2)(3)(4)(5)(6)(7)(8), Dial: -58°F to 120°F/-50°C to 49°C[3] [4] | |
| PB(1)(2)(3)(4)(5)(6)(7)(8), -58°F to 302°F/-50°C to 150°C[5] [6] [7] | |
| PJEZ(1)(2)(3)(4)(5)(6)(7)(8), -58°F to 194°F/-50°C to 90°C[2] [8] | |
| PQ(1)(2)(3)(4)(5)(6)(7)(8), -58°F to 194°F/-50°C to 90°C[1] [7] | |
| PX(1)(2)(3)(4)(5)(6)(7)(8), -58°F to 302°F/-50°C to 150°C[5] [6] [7] | |
[1] (1) Two numerical digits describing available Mechanical Housing options (Module H):
01-03 - Panel housing SMALL - Front Mounting (71x29mm)
04-06 - Panel housing LARGE - Front Mounting (138x29mm)
07 - Panel housing SMALL – Rear Mounting (71x29mm)
(2) Two numerical digits describing available options for the Distinctive board -
ELECTRONICS - MAIN PART (Module M):
01-04 - Small Long enclosure, 115/230 Vac, 4R
05-08 - Large Long enclosure, 115/230 Vac, 6R
09-13, 17-18 - SMALL HMI enclosure, 12 Vdc
14-16 - LARGE HMI enclosure, 12 Vdc
(3) Two numerical digits describing available Outputs and Relays options for the
Distinctive board (Module O):
00 - NONE (No Outputs or Relays)
01 - Small Long enclosure, 1 relay
02 - Small Long enclosure, 2 relays
03 - Small Long enclosure, 3 relays
04 - Small Long enclosure, 4 relays
05-06 - Large Long enclosure, 2 relays
07-08 - Large Long enclosure, 3 relays
09-10 - Large Long enclosure, 4 relays
11-12 - Large Long enclosure, 5 relays
13-14 - Large Long enclosure, 6 relays
(4) Two numerical digits describing options for Distinctive board - TERMINALS
(Module T):
00 - NONE (no terminals)
01-14 - Small Long enclosure (4R), describes terminals for Power supply, inputs
and outputs
15-26 - Large Long enclosure (6R), describes teminals for Power supply, inputs
and outputs
27-33 - Small HMI enclosure, describes terminals for Serial, inputs and free-fit
resistive
34-40 - Large HMI enclosure, describes terminals for serial, inputs and free-fit
resistive
41-47 - Small HMI enclosure, describes terminals for serial, inputs and free-fit
resistive
(5) Two numerical digits describing options for Core board (Module C):
01-11 - Small - describes Processor and Peripherals
12-21 - Large - describes Processor and Peripherals
(6) Two numerical digits describing options for Extra Functional Module board
(Module X):
00 - NONE
01-09 - Serial comm, Input/Output Interface and Battery Backup Options
(7) Two alpha or numeric digits describing Production Features options, such as
Coating and Production facility:
00 - NONE
(01) - Conformal Coating
(02) - Electronic Grade Coating (3M)
(IT) - Italy Manufacturing
(CH) - China Manufacturing
(HR) - Croatia Manufacturing
[2] Beginning date code December 12, 2018.
[3] With beginning date code of December 12, 2018.
[4] (1) Carel or customer version:
33 - Standard Carel version+
EV - Standard Carel IR33+ version
xx - Any two alphanumeric characters for customer identification
(2) Number of relays:
C - Four relays: compressor, defrost, fan, and auxiliary
F - Three relays: compressor, defrost, and fan
M - Zero relay
S - One relay: compressor
Y - Two relays: compressor and defrost
(3) Type of temperature probe input: 0 - NTC
(4) Main voltage:
0 - 12 V ac or 13-15 Vdc, class 2 supplied
A - 115 V ac, model provided with transformer - not available for relay code C
E - 230 V ac, model provided with transformer - not available for relay code C
H - 115/230 V ac, model provided with switching power supply module - not
available for relay code M
L - 24 V ac or 15-30 Vdc, class 2 supplied
(5) Model option:
A - Provided with auxiliary relay
B - Option C and R
C - Provided with time clock
E - Option C and H
F - Option C, H, and R
G - Option A and H
H - Provided with relay 2HP
I - Option H and R
K - Option A, H, and R
L - Option A and C
M - Option A and R
N - Standard
O - Option A, C, and H
P - Provided with relay 16 A
Q - Option P and R
R - Provided with infrared receiver
S - Option C and P
T - Option A, C, and R
U - Option C, P, and R
V - Option A and P
W - Option A, C, H, and R
X - Option A, P, and R
Y - Option A, C, and P
Z - Option A, C, P, and R
(6) Kind of terminal blocks:
0/A/C/E/G - Screw terminal blocks
1 - Quick-connect tabs for relay outputs and plug-in terminal blocks
for IN/OUT signals
2/D/H - Plug-in terminal blocks
3 - Quick-connect tabs for relay outputs and screw terminal blocks
for IN/OUT signals
5 - Vertical screw terminal blocks
6 - As 1, back mounting version
7 - As 2, back mounting version
8 - As 3, back mounting version
B/F - Screw terminal blocks for relay outputs and plug-in terminal
blocks for IN/OUT signals
(7) Personalization identifier: 0 - Standard, x - One alphanumeric character
(8) Shipping packaging information:
Blank - Single package
1/3/5 - Multiple package
1/5 - Multiple package
K - Kit package with accessories
[5] (1) 2-digit alphanumeric suffix indicating Carel standard version or customer version
00 - Standard CAREL Power Compact
01 - Standard CAREL Power Compact
B1 - CAREL Battery Backup
B2 - EASY BLAST CHILLER
EV - Standard CAREL
F3 - VCC
Any two alphanumeric characters for customer identification
(2) Model
C - Four relays: compressor, defrost, fan, and auxiliary
D - Driver for external SSR and 3 standard relays (2HP, 8A, 8A)
F - Three relays: compressor, defrost, and fan
H - Five relays: Compressor, defrost, fan, two auxiliary
(3) Type of Probe Input
0 - NTC probes
8 - NTC: UL label
9 - NTC: alternate UL label
(4) Power Supply
A - 115VAC (model S, Y, F)
E - 230VAC (model S, Y, F)
H - 115/230 VAC Switching (model F, C, H)
S - 115/230VAC Switching (SMALL)
0 - 12VAC
(5) Model Options
A - One Auxiliary Relay
B - Option C and R
C - Real Time Clock (RTC)
L - Option A and C
M - IR receiver and Auxiliary Relay
N - No Options
P - 16A, 8A, 8A relays
Q - Option P and R
R - IR Receiver
S - Option C and P
T - Option A, C, and R
U - Option C, P, and R
V - Option A and P
X - Option A, P, and R
Y - Option A, C, and P
Z - Option A, C, P, and R
(6) Connections, Front, and Mounting Options
Feature A - Panel mounting from rear with polycarbonate on the front.
Feature B - Panel mounting from rear with remote membrane keypad on the front.
0 - No Option
1 - Faston (Easy Wide) same as E, panel mounting from rear, feature B
2 - Screw Terminals (Easy Wide) same as F, panel mounting from rear, feature B
3 - Screw Terminals (IR33+ Wide) same as G, panel mounting from rear, feature B
4 - Faston, Extra probes (IR33+ Wide) same as H, panel mounting from rear, feature
B
5 - Removebale Terminals (IR33+ Wide) same as I, panel mounting from rear, feature
B
6 - Same as L (IR33+ Wide), panel mounting from rear, feature B
7 - Same as M (IR33+ Wide), panel mounting from rear, feature B
8 - Same as N (IR33+ Wide), panel mounting from rear, feature B
A - Screw Terminals (Easy Wide)
B - Faston, Extra probes (Easy Wide)
C - Removeable Terminals (Easy Wide)
D - Faston outputs, Screw terminals Inputs (Easy Wide)
E - Faston (Easy Wide)
F - Screw Terminals (Easy Wide)
G - Scew Terminals (IR33+ Wide)
H - Faston, Extra probes (IR33+ Wide)
I - Removeable Terminals (IR33+ Wide)
L - Faston outputs, Screw Term. Inputs (IR33+ Wide)
M - Faston (IR33+ Wide)
N - Screw Terminals (IR33+ Wide)
P - Same as A (Easy Wide), panel mounting from rear, feature A
R - Same as B (Easy Wide), panel mounting from rear, feature A
S - Same as C (Easy Wide), panel mounting from rear, feature A
T - Same as D (Easy Wide), panel mounting from rear, feature A
U - Same as E (Easy Wide), panel mounting from rear, feature A
V - Same as F (Easy Wide), panel mounting from rear, feature A
W - Same as P (Easy Wide), panel mounting from rear, feature B
X - Same as R (Easy Wide), panel mounting from rear, feature B
Y - Same as S (Easy Wide), panel mounting from rear, feature B
Z - Same as T (Easy Wide), panel mounting from rear, feature B
(7) Display color
A - Blue Display
G - Green Display
W - White Display
X - One numeric character as a personalization identifier
(8) Packaging/Kitting
Blank - Single package
1 - Tool for multiple package
K - Custom Kit
[6] With beginning date code of 2018-12-12.
[7] Temperature ranges for this thermometer are dependent upon the type of optional probe
used
[8] (1) Note: The first four characters 'PJEZ' represent the standard Carel version;
or may be 'PZXX' where 'XX' represents a two digit customer code for special
application software or aesthetical personalization; or may be 'PJYY' where
'YY' represents any two alphanumeric characters for CAREL specific
application software; or may be "PQXX" where "xx" represents any two alphanumeric
characters for customer identification for specific application software or
aesthetical personalization. ‘Aesthetical personalization’: includes graphics; the
color of the logo on the plastic frame, a different color plastic, different color
LEDs or similar changes. The PQxx contains sealed relays and is to be used in
applications with flammable refrigerants.
(2) Numebr of relays, alpha or numeric character
(3) Type of temperature probe input/version
0 - NTC probe - buzzer alarm
1 - NTC probe
2 - NTC probe - HT range +40 - +150C - buzzer
3 - NTC probe - HT range +40 - +150C
8 - NTC probe - buzzer alarm - "SPLIT" version
N - NTC probe - smaller "Compact" version
(4) Model option: Zero for Standard or alpha or numeric character for electronic and
Bluetooth options
(5) Voltage: alpha or numeric character for voltage
(6) Connections type / serial interface: alpha or numeric character
(7) Personalized identifier: any alpha or numeric character for alternate set point,
color, etc.
(8) Packaging: Blank -Standard Carel stand-alone packaging, K- Kit version for
multiple delivery, x - Any alpha numeric character indicating personalized
packaging.
|
|
Facility : Brugine (Padova), Italy
|
COMPONENTS: |
|
|
Basic Control Unit[1] |
|
| BCU(1)(2)(3)(4)(5)(6)(7), -20 to 60°C | |
[1] (1) Two numerical digits describing available Mechanical Housing options (Module H):
01-03 - Panel housing SMALL - Front Mounting (71x29mm)
04-06 - Panel housing LARGE - Front Mounting (138x29mm)
07 - Panel housing SMALL – Rear Mounting (71x29mm)
(2) Two numerical digits describing available options for the Distinctive board -
ELECTRONICS - MAIN PART (Module M):
01-04 - Small Long enclosure, 115/230 Vac, 4R
05-08 - Large Long enclosure, 115/230 Vac, 6R
09-13, 17-18 - SMALL HMI enclosure, 12 Vdc
14-16 - LARGE HMI enclosure, 12 Vdc
(3) Two numerical digits describing available Outputs and Relays options for the
Distinctive board (Module O):
00 - NONE (No Outputs or Relays)
01 - Small Long enclosure, 1 relay
02 - Small Long enclosure, 2 relays
03 - Small Long enclosure, 3 relays
04 - Small Long enclosure, 4 relays
05-06 - Large Long enclosure, 2 relays
07-08 - Large Long enclosure, 3 relays
09-10 - Large Long enclosure, 4 relays
11-12 - Large Long enclosure, 5 relays
13-14 - Large Long enclosure, 6 relays
(4) Two numerical digits describing options for Distinctive board - TERMINALS
(Module T):
00 - NONE (no terminals)
01-14 - Small Long enclosure (4R), describes terminals for Power supply, inputs
and outputs
15-26 - Large Long enclosure (6R), describes teminals for Power supply, inputs
and outputs
27-33 - Small HMI enclosure, describes terminals for Serial, inputs and free-fit
resistive
34-40 - Large HMI enclosure, describes terminals for serial, inputs and free-fit
resistive
41-47 - Small HMI enclosure, describes terminals for serial, inputs and free-fit
resistive
(5) Two numerical digits describing options for Core board (Module C):
01-11 - Small - describes Processor and Peripherals
12-21 - Large - describes Processor and Peripherals
(6) Two numerical digits describing options for Extra Functional Module board
(Module X):
00 - NONE
01-09 - Serial comm, Input/Output Interface and Battery Backup Options
(7) Two alpha or numeric digits describing Production Features options, such as
Coating and Production facility:
00 - NONE
(01) - Conformal Coating
(02) - Electronic Grade Coating (3M)
(IT) - Italy Manufacturing
(CH) - China Manufacturing
(HR) - Croatia Manufacturing
|
|
|
NTC Sensor Temperature Probe[2] |
|
| NTC015WH03 | |
| NTC030WH03 | |
| NTC060WH03 | |
| NTCR31WH01 | |
| NTCR31WH04 | |
| NTCR33WH01 | |
| NTCR33WH04 | |
[2] Beginning date code October 20, 2008. |
|
|
Refrigerator/Freezer/Heating Temperature Controller Thermometer |
|
| IR(1)(2)(3)(4)(5)(6)(7)(8), Dial: -58°F to 120°F/-50°C to 49°C[3] [4] | |
| IX(1)(2)(3)(4)(5)(6)(7)(8), Dial: -58°F to 120°F/-50°C to 49°C[3] [4] | |
| PB(1)(2)(3)(4)(5)(6)(7)(8), -58°F to 302°F/-50°C to 150°C[6] [7] [8] | |
| PJEZ(1)(2)(3)(4)(5)(6)(7)(8), -58°F to 194°F/-50°C to 90°C[2] [5] | |
| PQ(1)(2)(3)(4)(5)(6)(7)(8), -58°F to 194°F/-50°C to 90°C[2] [5] | |
| PX(1)(2)(3)(4)(5)(6)(7)(8), -58°F to 302°F/-50°C to 150°C[6] [7] [8] | |
[2] Beginning date code October 20, 2008.
[3] With beginning date code of 2007-02-15.
[4] (1) Carel or customer version:
33 - Standard Carel version
EV - Standard Carel IR33+ version
xx - Any two alphanumeric characters for customer identification
(2) Number of relays:
C - Four relays: compressor, defrost, fan, and auxiliary
F - Three relays: compressor, defrost, and fan
M - Zero relay
S - One relay: compressor
Y - Two relays: compressor and defrost
(3) Type of temperature probe input: 0 - NTC
(4) Main voltage:
0 - 12 V ac or 13-15 Vdc, class 2 supplied
A - 115 V ac, model provided with transformer - not available for relay code C
E - 230 V ac, model provided with transformer - not available for relay code C
H - 115/230 V ac, model provided with switching power supply module - not
available for relay code M
L - 24 V ac or 15-30 Vdc, class 2 supplied
(5) Model option:
A - Provided with auxiliary relay
B - Option C and R
C - Provided with time clock
E - Option C and H
F - Option C, H, and R
G - Option A and H
H - Provided with relay 2HP
I - Option H and R
K - Option A, H, and R
L - Option A and C
M - Option A and R
N - Standard
O - Option A, C, and H
P - Provided with relay 16 A
Q - Option P and R
R - Provided with infrared receiver
S - Option C and P
T - Option A, C, and R
U - Option C, P, and R
V - Option A and P
W - Option A, C, H, and R
X - Option A, P, and R
Y - Option A, C, and P
Z - Option A, C, P, and R
(6) Kind of terminal blocks:
0/A/C/E/G - Screw terminal blocks
1 - Quick-connect tabs for relay outputs and plug-in terminal blocks
for IN/OUT signals
2/D/H - Plug-in terminal blocks
3 - Quick-connect tabs for relay outputs and screw terminal blocks
for IN/OUT signals
5 - Vertical screw terminal blocks
6 - As 1, back mounting version
7 - As 2, back mounting version
8 - As 3, back mounting version
B/F - Screw terminal blocks for relay outputs and plug-in terminal
blocks for IN/OUT signals
(7) Personalization identifier: 0 - Standard, x - One alphanumeric character
(8) Shipping packaging information:
Blank - Single package
1/3/5 - Multiple package
1/5 - Multiple package
K - Kit package with accessories
[5] (1) Note: The first four characters 'PJEZ' represent the standard Carel version;
or may be 'PZXX' where 'XX' represents a two digit customer code for special
application software or aesthetical personalization; or may be 'PJYY' where
'YY' represents any two alphanumeric characters for CAREL specific
application software; or may be "PQXX" where "xx" represents any two alphanumeric
characters for customer identification for specific application software or
aesthetical personalization. ‘Aesthetical personalization’: includes graphics; the
color of the logo on the plastic frame, a different color plastic, different color
LEDs or similar changes. The PQxx contains sealed relays and is to be used in
applications with flammable refrigerants.
(2) Numebr of relays, alpha or numeric character
(3) Type of temperature probe input/version
0 - NTC probe - buzzer alarm
1 - NTC probe
2 - NTC probe - HT range +40 - +150C - buzzer
3 - NTC probe - HT range +40 - +150C
8 - NTC probe - buzzer alarm - "SPLIT" version
N - NTC probe - smaller "Compact" version
(4) Model option: Zero for Standard or alpha or numeric character for electronic
and Bluetooth options
(5) Voltage: alpha or numeric character for voltage
(6) Connections type / serial interface: alpha or numeric character
(7) Personalized identifier: any alpha or numeric character for alternate set point,
color, etc.
(8) Packaging: Blank -Standard Carel stand-alone packaging, K- Kit version for
multiple delivery, x - Any alpha numeric character indicating personalized
packaging.
[6] (1) 2-digit alphanumeric suffix indicating Carel standard version or customer version
00 - Standard CAREL Power Compact
01 - Standard CAREL Power Compact
B1 - CAREL Battery Backup
B2 - EASY BLAST CHILLER
EV - Standard CAREL
F3 - VCC
Any two alphanumeric characters for customer identification
(2) Model
C - Four relays: compressor, defrost, fan, and auxiliary
D - Driver for external SSR and 3 standard relays (2HP, 8A, 8A)
F - Three relays: compressor, defrost, and fan
H - Five relays: Compressor, defrost, fan, two auxiliary
(3) Type of Probe Input
0 - NTC probes
8 - NTC: UL label
9 - NTC: alternate UL label
(4) Power Supply
A - 115VAC (model S, Y, F)
E - 230VAC (model S, Y, F)
H - 115/230 VAC Switching (model F, C, H)
S - 115/230VAC Switching (SMALL)
0 - 12VAC
(5) Model Options
A - One Auxiliary Relay
B - Option C and R
C - Real Time Clock (RTC)
L - Option A and C
M - IR receiver and Auxiliary Relay
N - No Options
P - 16A, 8A, 8A relays
Q - Option P and R
R - IR Receiver
S - Option C and P
T - Option A, C, and R
U - Option C, P, and R
V - Option A and P
X - Option A, P, and R
Y - Option A, C, and P
Z - Option A, C, P, and R
(6) Connections, Front, and Mounting Options
Feature A - Panel mounting from rear with polycarbonate on the front.
Feature B - Panel mounting from rear with remote membrane keypad on the front.
0 - No Option
1 - Faston (Easy Wide) same as E, panel mounting from rear, feature B
2 - Screw Terminals (Easy Wide) same as F, panel mounting from rear, feature B
3 - Screw Terminals (IR33+ Wide) same as G, panel mounting from rear, feature B
4 - Faston, Extra probes (IR33+ Wide) same as H, panel mounting from rear, feature
B
5 - Removebale Terminals (IR33+ Wide) same as I, panel mounting from rear, feature
B
6 - Same as L (IR33+ Wide), panel mounting from rear, feature B
7 - Same as M (IR33+ Wide), panel mounting from rear, feature B
8 - Same as N (IR33+ Wide), panel mounting from rear, feature B
A - Screw Terminals (Easy Wide)
B - Faston, Extra probes (Easy Wide)
C - Removeable Terminals (Easy Wide)
D - Faston outputs, Screw terminals Inputs (Easy Wide)
E - Faston (Easy Wide)
F - Screw Terminals (Easy Wide)
G - Scew Terminals (IR33+ Wide)
H - Faston, Extra probes (IR33+ Wide)
I - Removeable Terminals (IR33+ Wide)
L - Faston outputs, Screw Term. Inputs (IR33+ Wide)
M - Faston (IR33+ Wide)
N - Screw Terminals (IR33+ Wide)
P - Same as A (Easy Wide), panel mounting from rear, feature A
R - Same as B (Easy Wide), panel mounting from rear, feature A
S - Same as C (Easy Wide), panel mounting from rear, feature A
T - Same as D (Easy Wide), panel mounting from rear, feature A
U - Same as E (Easy Wide), panel mounting from rear, feature A
V - Same as F (Easy Wide), panel mounting from rear, feature A
W - Same as P (Easy Wide), panel mounting from rear, feature B
X - Same as R (Easy Wide), panel mounting from rear, feature B
Y - Same as S (Easy Wide), panel mounting from rear, feature B
Z - Same as T (Easy Wide), panel mounting from rear, feature B
(7) Display color
A - Blue Display
G - Green Display
W - White Display
X - One numeric character as a personalization identifier
(8) Packaging/Kitting
Blank - Single package
1 - Tool for multiple package
[7] With beginning date code of 2016-06-03
[8] Temperature ranges for this thermometer are dependent upon the type of optional probe
used
|
|
Number of matching Manufacturers is 1
Number of matching Products is 55
Processing time was 0 seconds
