NSF Product and Service Listings
These NSF Official Listings are current as of Saturday, April 19, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/food/Listings.asp?Standard=007&Company=40200&
NSF/ANSI 7
Commercial Refrigerators and Storage Freezers
Commercial Refrigerators and Storage Freezers
| Heat Transfer Products Group | |
| 201 Thomas French Drive | |
| Scottsboro, AL 35768 | |
| United States | |
| 256-259-7400 |
Facility : Scottsboro, AL
|
COMPONENTS:[1] [2] |
|
|
"A" Series Evaporator Unit[3] |
|
| (10)A(1)(2)(3)-(4)B-(5)(7) | |
| AM(2)(3)(4)(14)(5)(7) | |
| ATF(1)(2)(4)(3)-(15)(5)(7) | |
| EL(2)(3)(4)(14)(5)(7) | |
| EM(2)(3)(4)(14)(5)(7) | |
| LPF(1)(2)(4)(3)-(15)(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"AL" Series Evaporator Unit[3] |
|
| AL14-(4)(1)-(5)(7) - AL68-(4)(1)-(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"AMC" Series Evaporator Unit[3] |
|
| AMC(2)(3)-(4)-(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"AMU" Series Evaporator Unit |
|
| 1200-(5)(7) - 1800-(5)(7) | |
|
"ASL" Series Evaporator Unit |
|
| ASL(1)(2)(3)-(4)-(5) | |
|
"C" Series Evaporator Unit |
|
| C(4)-(5)(7) | |
|
"CM" Series Evaporator Unit[3] |
|
| CM(1)(2)(3)-(4)-(5)(7)[7] | |
[3] Certified for Splash Zone applications only. [7] (1) Blank or 0 referencing internal part number. |
|
|
"CS" Series Evaporator Unit[3] |
|
| CS(1)-(4)-(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"CT" Series Evaporator Unit[3] |
|
| (10)CT(1)(2)(3)-(4)-(5)(7) | |
| CTF(1)(2)(4)(3)-(15)(5)(7) | |
| HSE-(4)-(5)(7) | |
| HSF(1)(2)(4)(3)-(15)(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"CW" Series Evaporator Unit[3] |
|
| CW(1)(2)(3)-(4)-(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"DF" Series Evaporator Unit[3] |
|
| DF(1)(2)(3)-(4)-(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"DS" Series Evaporator Unit[3] |
|
| DS(1)-(4)-(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"EF" Series Evaporator Unit[2] [4] |
|
| EF(1)(4)(6)(5)(7) | |
[2] (1) Denotes one of the following:
A - Air defrost
E - Electric defrost
G - Reverse Cycle
H - Hot gas re-evap
W - Warm fluid (glycol units)
(2) Denotes a single digit number indicating number of fans.
(3) Denotes a single digit number indicating fin density in Fins Per Inc
(4) Indicates 1 to 4 numerical digits representing BTUH capacity x 100 or represents
capacity size relative to other models.
(5) Indicates single digit alpha character representing voltage code:
A - 115/60/1
B - 208/60/1
C - 230/60/1
D - 208-230/60/1
E - 208-230/60/3
F - 460/60/1
G - 460/60/3
H - 575/60/1
J - 575/60/3
(6) Single alpha character indicating fin density as follows:
U - 4 Fins per inch (Freezer)
L - 6 Fins per inch (Freezer)
M or B - 6 Fins per inch (Cooler)
H - 8 Fins per inch (Cooler)
X - Other
(7) Optional one or two digit alpha character indicating motor type.
(8) Optional 2-digit alpha character indicating coil coating. RP is approved.
(9) Optional single alpha character indicating specific customer options. W is
approved.
(10) Optional 1 to 3 letter prefix to denote OEM customer.
(11) Single alpha character to denote brand name
(12) Single number to indicate coil coating
1 - No coating, aluminum fins
2 - No coating, copper fins
other - Coated, aluminum fins
(13) Single number to indicate cabinet coating
1 - No coating, aluminum
4 - No coating, stainless
other - Coated, aluminum
(14) Optional, up to two characters to indicate revision level starting with "A".
(15) Optional, up to two characters to designate internal construction.
(16) Denotes medium or low temperature design.
M = Medium temperature
L = Low temperature
(17) two or three characters to denote refrigerant type.
[4] NSF Certified production starting with date code 11/22/2013.
|
|
|
"ELC" Series Evaporator Unit[3] |
|
| ELC(2)(3)-(4)-(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"EMC" Series Evaporator Unit[3] |
|
| EMC(2)(3)-(4)-(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"FL" Series Evaporator Unit[3] |
|
| FL(2)(3)-(4)-(1)-(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"FT" Series Evaporator Unit |
|
| FT(2)(3)-(4)(8)(9)-(5)(7) | |
|
"FW" Series Evaporator Unit[3] |
|
| FW(1)(2)(3)-(4)-(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"HI" Series Evaporator Unit[3] |
|
| HI17-(4)-(5)(7) - HI47-(4)-(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"HS" Series Evaporator Unit[3] |
|
| HS(1)50-XXX-(2)(7) - HS(1)174-XXX-(2)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"HSA" Series Evaporator Unit[3] |
|
| HSA(4)-(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"HT" Series Evaporator Unit[3] |
|
| HT(1)(2)(3)-(4)B-(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"HW" Series Evaporator Unit[3] |
|
| HW(1)(6)(2)-(4)-(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"IF" Series Evaporator Unit[3] |
|
| IF(1)(2)(3)-(4)-(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"IT" Series Evaporator Unit[3] |
|
| IT(1)(2)(3)-(4)-(5)(7) | |
| ITF(1)(2)(4)(3)-(15)(5)(7) | |
| MSF(1)(2)(4)(3)-(15)(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"L" Series Evaporator Unit[6] |
|
| L(1)(2)(3)(4)(5)(6)(7)(8)(9)(10) | |
[6] (1) Brand:
R – Russell Coil
W – Witt
C – Coldzone
H - Heat Transfer Products
K – Kramer
Z – Rheem
Note – Other brand designation may use other single letter code.
(2) Evaporator Product Family:
L - Low Profile
U - Low or Medium Profile Opposite end connections
E - Extra Low Profile (Center Mount)
V - Low Air Velocity
M – Medium size evaporator
H – Heavy Duty with right side piping connections
Y – Heavy Duty with Left side piping connections
R – Heat Reclaim with right side piping connections
W – Warehouse with right side piping connections
Z – Warehouse with left side piping connections
(3) Fins Per Inch:
2 -8 FPI
(4) Defrost Type:
A – Air
E – Electric
K – Hot Gas 3 pipe coil with hot gas drain pan
L – Hot Gas reverse with hot gas drain pan
H – Hot Gas (3 Pipe)
G – Hot Gas (Reverse Cycle)
(5) Nominal Size BTUH
(6) Voltage Code:
A - 115/1/60
D – 208-230/1/60
E – 208-230/3/60
F – 460/1/60
G – 460/3/60
H – 575/1/60
J – 575/3/60
L – 100/1/50
M – 200-220/1/50
N – 200-220/1/50
P – 380/1/50
Q – 380/3/50
S - 115-230/1/50-60 – ECM motors only
(7) Motor Type:
D – DUAL SPEED EC MOTOR
E - ECM
H – HIGH STATIC (PRESSURE DROP) TRUE THREE PHASE MOTOR
P – PSC
S - Shaded Pole
T – TRUE THREE PHASE MOTOR
V – Variable Speed MOTOR
(8) Revision Code:
* – Single letter
(9) Refrigerant Code:
Blank - no factory installed options
* – Refrigerants (Single letter code)
(10) Mounted Option Code:
Blank – No mounted options
* – Mounted Configurations (Single or Multiple letter code)
(11) Compressor Type
H - Hermetic
S - Scroll
SH - Semi Hermetic
D - Discuss
(12) Temperature Range
M - Medium
L - Low
|
|
|
"LP" Series Evaporator Unit[3] |
|
| (1)(2)FPI(3)0041(4)(5)A(6)(7)[5] | |
| (1)(2)FPI(3)041(4)(5)A(6)(7)[5] | |
| LP-(4)-(5)(7) | |
[3] Certified for Splash Zone applications only.
[5] (1) R - Russell
C - Coldzone
K - Kramer
W - Witt
Z - Rheem
(2) E - Extra Low Profile
H - Heavy Duty
L - Low Profile
M - Medium Profile
R - Heat Reclaim
U - Opposite End Connection
V - Low Air Velocity
(3) Defrost Type
A - Air Defrost
E - Electric Defrost
G - Host Gas Reverse Cycle
H - Hot Gas 3-Pipe
(4) Voltage Code
A - 115/1/60
D - 208-230/1/60
E - 208-230/3/60
F - 460/1/60
G - 460/3/60
J - 575/3/60
(5) Motor Type
D - Dual Speed EC
E - Single Speed EC
P - PSC
T - Totally Enclosed
V - Variable Speed
(6) Blank - Standard Configuration
L -Mounted TXV,LLS, T-Stat
M - Master Configuration with TXV,LLS, T-Stat,Copper Tube
T - Mounted TXV only
(7) Refrigerant Type
A - R404A
B - R407A
C - R407C
D - R407F
E - R448A/R449A
F - CO2 DX
G - GLYCOL
H - R410A
J - R450A/513A
|
|
|
"LV" Series Evaporator Unit[3] |
|
| LV-(4)-(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"LW" Series Evaporator Unit[3] |
|
| LW(1)(2)(3)-(4)-(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"MP" Series Evaporator Unit[3] |
|
| (1)(2)FPI(3)0041(4)(5)A(6)(7)[7] | |
| (1)(2)FPI(3)041(4)(5)A(6)(7)[7] | |
| MP-(4)-(5)(7) | |
[3] Certified for Splash Zone applications only. [7] (1) Blank or 0 referencing internal part number. |
|
|
"MS" Series Evaporator Unit[3] |
|
| MS(1)-(4)-(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"MTW" Series Evaporator Unit |
|
| MTW(2)(3)-(4)(8)(9)-(5)(7) | |
|
"MU" Series Evaporator Unit |
|
| MDF(2)(3)-(4)(8)(9)-(5)(7) | |
| MUF(2)(3)-(4)(8)(9)-(5)(7) | |
|
"P" Series Evaporator Unit[3] |
|
| P(1)(6)(2)-(4) | |
[3] Certified for Splash Zone applications only. |
|
|
"P" Series Package Unit[6] |
|
| (1)P(11)(5)(12)(9)(6)(8) | |
[6] (1) Brand:
R – Russell Coil
W – Witt
C – Coldzone
H - Heat Transfer Products
K – Kramer
Z – Rheem
Note – Other brand designation may use other single letter code.
(2) Evaporator Product Family:
L - Low Profile
U - Low or Medium Profile Opposite end connections
E - Extra Low Profile (Center Mount)
V - Low Air Velocity
M – Medium size evaporator
H – Heavy Duty with right side piping connections
Y – Heavy Duty with Left side piping connections
R – Heat Reclaim with right side piping connections
W – Warehouse with right side piping connections
Z – Warehouse with left side piping connections
(3) Fins Per Inch:
2 -8 FPI
(4) Defrost Type:
A – Air
E – Electric
K – Hot Gas 3 pipe coil with hot gas drain pan
L – Hot Gas reverse with hot gas drain pan
H – Hot Gas (3 Pipe)
G – Hot Gas (Reverse Cycle)
(5) Nominal Size BTUH
(6) Voltage Code:
A - 115/1/60
D – 208-230/1/60
E – 208-230/3/60
F – 460/1/60
G – 460/3/60
H – 575/1/60
J – 575/3/60
L – 100/1/50
M – 200-220/1/50
N – 200-220/1/50
P – 380/1/50
Q – 380/3/50
S - 115-230/1/50-60 – ECM motors only
(7) Motor Type:
D – DUAL SPEED EC MOTOR
E - ECM
H – HIGH STATIC (PRESSURE DROP) TRUE THREE PHASE MOTOR
P – PSC
S - Shaded Pole
T – TRUE THREE PHASE MOTOR
V – Variable Speed MOTOR
(8) Revision Code:
* – Single letter
(9) Refrigerant Code:
Blank - no factory installed options
* – Refrigerants (Single letter code)
(10) Mounted Option Code:
Blank – No mounted options
* – Mounted Configurations (Single or Multiple letter code)
(11) Compressor Type
H - Hermetic
S - Scroll
SH - Semi Hermetic
D - Discuss
(12) Temperature Range
M - Medium
L - Low
|
|
|
"S" Series Evaporator Unit[3] |
|
| (10)S(1)(2)(3)-(4)B-(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"SL" Series Evaporator Unit |
|
| SL(1)(2)(3)-(4)(8)(9)-(5)(7) | |
|
"SU" Series Evaporator Unit[3] |
|
| SU14-(4)(1)-(5)(7) - SU47-(4)(1)-(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"TT" Series Evaporator Unit |
|
| TT(2)(3)-(4)(8)(9)-(5)(7) | |
|
"TW" Series Evaporator Unit |
|
| TW(2)(3)-(4)(8)(9)-(5)(7) | |
|
"U" Series Evaporator Unit[3] |
|
| U(1)(6)(2)-(4)-(5)(7) | |
| UTF(1)(2)(4)(3)-(15)(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"UCP" Series Evaporator Unit[3] |
|
| UCP17-(4)(1)-(5)(7) - UCP25-(4)(1)-(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"V" Series Evaporator Unit[3] |
|
| V17-(4)-(5)(7) - V18-(4)-(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"WA" Series Evaporator Unit |
|
| WA(2)(3)-(4)(8)(9)-(5)(7) | |
|
"WE" Series Evaporator Unit |
|
| WE(2)(3)-(4)(8)(9)-(5)(7) | |
|
"WF" Series Evaporator Unit[3] |
|
| (11) WF (4) (5) (7) (2) (6) (12) (13) (1) (14) | |
| AML(4)M(5)(7) | |
| ELL(4)M(5)(7) | |
| FLF(1)(2)(4)(3)-(15)(5)(7) | |
| KVF(1)(2)(4)(3)-(15)(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
APEX Refrigeration Unit[2] [4] |
|
| XN(4)(16)(1)(17)(5)(7) | |
| XT(4)(16)(1)(17)(5)(7) | |
[2] (1) Denotes one of the following:
A - Air defrost
E - Electric defrost
G - Reverse Cycle
H - Hot gas re-evap
W - Warm fluid (glycol units)
(2) Denotes a single digit number indicating number of fans.
(3) Denotes a single digit number indicating fin density in Fins Per Inc
(4) Indicates 1 to 4 numerical digits representing BTUH capacity x 100 or represents
capacity size relative to other models.
(5) Indicates single digit alpha character representing voltage code:
A - 115/60/1
B - 208/60/1
C - 230/60/1
D - 208-230/60/1
E - 208-230/60/3
F - 460/60/1
G - 460/60/3
H - 575/60/1
J - 575/60/3
(6) Single alpha character indicating fin density as follows:
U - 4 Fins per inch (Freezer)
L - 6 Fins per inch (Freezer)
M or B - 6 Fins per inch (Cooler)
H - 8 Fins per inch (Cooler)
X - Other
(7) Optional one or two digit alpha character indicating motor type.
(8) Optional 2-digit alpha character indicating coil coating. RP is approved.
(9) Optional single alpha character indicating specific customer options. W is
approved.
(10) Optional 1 to 3 letter prefix to denote OEM customer.
(11) Single alpha character to denote brand name
(12) Single number to indicate coil coating
1 - No coating, aluminum fins
2 - No coating, copper fins
other - Coated, aluminum fins
(13) Single number to indicate cabinet coating
1 - No coating, aluminum
4 - No coating, stainless
other - Coated, aluminum
(14) Optional, up to two characters to indicate revision level starting with "A".
(15) Optional, up to two characters to designate internal construction.
(16) Denotes medium or low temperature design.
M = Medium temperature
L = Low temperature
(17) two or three characters to denote refrigerant type.
[4] NSF Certified production starting with date code 11/22/2013.
|
|
|
Aluminum Air Intake/Discharge Grill[7] |
|
| (1)8519222 | |
| (1)8519846 | |
| (1)8521013 | |
[7] (1) Blank or 0 referencing internal part number. |
|
|
“E” & “V” Center Mount Series Evaporators[6] |
|
| E(1)(2)(3)(4)(5)(6)(7)(8)(9)(10) | |
| V(1)(2)(3)(4)(5)(6)(7)(8)(9)(10) | |
[6] (1) Brand:
R – Russell Coil
W – Witt
C – Coldzone
H - Heat Transfer Products
K – Kramer
Z – Rheem
Note – Other brand designation may use other single letter code.
(2) Evaporator Product Family:
L - Low Profile
U - Low or Medium Profile Opposite end connections
E - Extra Low Profile (Center Mount)
V - Low Air Velocity
M – Medium size evaporator
H – Heavy Duty with right side piping connections
Y – Heavy Duty with Left side piping connections
R – Heat Reclaim with right side piping connections
W – Warehouse with right side piping connections
Z – Warehouse with left side piping connections
(3) Fins Per Inch:
2 -8 FPI
(4) Defrost Type:
A – Air
E – Electric
K – Hot Gas 3 pipe coil with hot gas drain pan
L – Hot Gas reverse with hot gas drain pan
H – Hot Gas (3 Pipe)
G – Hot Gas (Reverse Cycle)
(5) Nominal Size BTUH
(6) Voltage Code:
A - 115/1/60
D – 208-230/1/60
E – 208-230/3/60
F – 460/1/60
G – 460/3/60
H – 575/1/60
J – 575/3/60
L – 100/1/50
M – 200-220/1/50
N – 200-220/1/50
P – 380/1/50
Q – 380/3/50
S - 115-230/1/50-60 – ECM motors only
(7) Motor Type:
D – DUAL SPEED EC MOTOR
E - ECM
H – HIGH STATIC (PRESSURE DROP) TRUE THREE PHASE MOTOR
P – PSC
S - Shaded Pole
T – TRUE THREE PHASE MOTOR
V – Variable Speed MOTOR
(8) Revision Code:
* – Single letter
(9) Refrigerant Code:
Blank - no factory installed options
* – Refrigerants (Single letter code)
(10) Mounted Option Code:
Blank – No mounted options
* – Mounted Configurations (Single or Multiple letter code)
(11) Compressor Type
H - Hermetic
S - Scroll
SH - Semi Hermetic
D - Discuss
(12) Temperature Range
M - Medium
L - Low
|
|
|
“H” Large Profile Series Evaporators[6] |
|
| H(1)(2)(3)(4)(5)(6)(7)(8)(9)(10) | |
[6] (1) Brand:
R – Russell Coil
W – Witt
C – Coldzone
H - Heat Transfer Products
K – Kramer
Z – Rheem
Note – Other brand designation may use other single letter code.
(2) Evaporator Product Family:
L - Low Profile
U - Low or Medium Profile Opposite end connections
E - Extra Low Profile (Center Mount)
V - Low Air Velocity
M – Medium size evaporator
H – Heavy Duty with right side piping connections
Y – Heavy Duty with Left side piping connections
R – Heat Reclaim with right side piping connections
W – Warehouse with right side piping connections
Z – Warehouse with left side piping connections
(3) Fins Per Inch:
2 -8 FPI
(4) Defrost Type:
A – Air
E – Electric
K – Hot Gas 3 pipe coil with hot gas drain pan
L – Hot Gas reverse with hot gas drain pan
H – Hot Gas (3 Pipe)
G – Hot Gas (Reverse Cycle)
(5) Nominal Size BTUH
(6) Voltage Code:
A - 115/1/60
D – 208-230/1/60
E – 208-230/3/60
F – 460/1/60
G – 460/3/60
H – 575/1/60
J – 575/3/60
L – 100/1/50
M – 200-220/1/50
N – 200-220/1/50
P – 380/1/50
Q – 380/3/50
S - 115-230/1/50-60 – ECM motors only
(7) Motor Type:
D – DUAL SPEED EC MOTOR
E - ECM
H – HIGH STATIC (PRESSURE DROP) TRUE THREE PHASE MOTOR
P – PSC
S - Shaded Pole
T – TRUE THREE PHASE MOTOR
V – Variable Speed MOTOR
(8) Revision Code:
* – Single letter
(9) Refrigerant Code:
Blank - no factory installed options
* – Refrigerants (Single letter code)
(10) Mounted Option Code:
Blank – No mounted options
* – Mounted Configurations (Single or Multiple letter code)
(11) Compressor Type
H - Hermetic
S - Scroll
SH - Semi Hermetic
D - Discuss
(12) Temperature Range
M - Medium
L - Low
|
|
|
“M” Medium Profile Series Evaporators[6] |
|
| M(1)(2)(3)(4)(5)(6)(7)(8)(9)(10) | |
[6] (1) Brand:
R – Russell Coil
W – Witt
C – Coldzone
H - Heat Transfer Products
K – Kramer
Z – Rheem
Note – Other brand designation may use other single letter code.
(2) Evaporator Product Family:
L - Low Profile
U - Low or Medium Profile Opposite end connections
E - Extra Low Profile (Center Mount)
V - Low Air Velocity
M – Medium size evaporator
H – Heavy Duty with right side piping connections
Y – Heavy Duty with Left side piping connections
R – Heat Reclaim with right side piping connections
W – Warehouse with right side piping connections
Z – Warehouse with left side piping connections
(3) Fins Per Inch:
2 -8 FPI
(4) Defrost Type:
A – Air
E – Electric
K – Hot Gas 3 pipe coil with hot gas drain pan
L – Hot Gas reverse with hot gas drain pan
H – Hot Gas (3 Pipe)
G – Hot Gas (Reverse Cycle)
(5) Nominal Size BTUH
(6) Voltage Code:
A - 115/1/60
D – 208-230/1/60
E – 208-230/3/60
F – 460/1/60
G – 460/3/60
H – 575/1/60
J – 575/3/60
L – 100/1/50
M – 200-220/1/50
N – 200-220/1/50
P – 380/1/50
Q – 380/3/50
S - 115-230/1/50-60 – ECM motors only
(7) Motor Type:
D – DUAL SPEED EC MOTOR
E - ECM
H – HIGH STATIC (PRESSURE DROP) TRUE THREE PHASE MOTOR
P – PSC
S - Shaded Pole
T – TRUE THREE PHASE MOTOR
V – Variable Speed MOTOR
(8) Revision Code:
* – Single letter
(9) Refrigerant Code:
Blank - no factory installed options
* – Refrigerants (Single letter code)
(10) Mounted Option Code:
Blank – No mounted options
* – Mounted Configurations (Single or Multiple letter code)
(11) Compressor Type
H - Hermetic
S - Scroll
SH - Semi Hermetic
D - Discuss
(12) Temperature Range
M - Medium
L - Low
|
|
[1] All units may have a prefix "x" designating internal changes only.
[2] (1) Denotes one of the following:
A - Air defrost
E - Electric defrost
G - Reverse Cycle
H - Hot gas re-evap
W - Warm fluid (glycol units)
(2) Denotes a single digit number indicating number of fans.
(3) Denotes a single digit number indicating fin density in Fins Per Inc
(4) Indicates 1 to 4 numerical digits representing BTUH capacity x 100 or represents
capacity size relative to other models.
(5) Indicates single digit alpha character representing voltage code:
A - 115/60/1
B - 208/60/1
C - 230/60/1
D - 208-230/60/1
E - 208-230/60/3
F - 460/60/1
G - 460/60/3
H - 575/60/1
J - 575/60/3
(6) Single alpha character indicating fin density as follows:
U - 4 Fins per inch (Freezer)
L - 6 Fins per inch (Freezer)
M or B - 6 Fins per inch (Cooler)
H - 8 Fins per inch (Cooler)
X - Other
(7) Optional one or two digit alpha character indicating motor type.
(8) Optional 2-digit alpha character indicating coil coating. RP is approved.
(9) Optional single alpha character indicating specific customer options. W is
approved.
(10) Optional 1 to 3 letter prefix to denote OEM customer.
(11) Single alpha character to denote brand name
(12) Single number to indicate coil coating
1 - No coating, aluminum fins
2 - No coating, copper fins
other - Coated, aluminum fins
(13) Single number to indicate cabinet coating
1 - No coating, aluminum
4 - No coating, stainless
other - Coated, aluminum
(14) Optional, up to two characters to indicate revision level starting with "A".
(15) Optional, up to two characters to designate internal construction.
(16) Denotes medium or low temperature design.
M = Medium temperature
L = Low temperature
(17) two or three characters to denote refrigerant type.
|
|
Facility : Tamps, Mexico
|
COMPONENTS:[1] [2] |
|
|
"A" Series Evaporator Unit[3] |
|
| (10)A(1)(2)(3)-(4)B-(5)(7) | |
| AM(2)(3)(4)(14)(5)(7) | |
| ATF(1)(2)(4)(3)-(15)(5)(7) | |
| EL(2)(3)(4)(14)(5)(7) | |
| EM(2)(3)(4)(14)(5)(7) | |
| LPF(1)(2)(4)(3)-(15)(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"AL" Series Evaporator Unit[3] |
|
| AL14-(4)(1)-(5)(7) - AL68-(4)(1)-(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"AMC" Series Evaporator Unit[3] |
|
| AMC(2)(3)-(4)-(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"AMU" Series Evaporator Unit |
|
| 1200-(5)(7) - 1800-(5)(7) | |
|
"ASL" Series Evaporator Unit |
|
| ASL(1)(2)(3)-(4)-(5) | |
|
"C" Series Evaporator Unit |
|
| C(4)-(5)(7) | |
|
"CM" Series Evaporator Unit[3] |
|
| CM(1)(2)(3)-(4)-(5)(7)[4] | |
[3] Certified for Splash Zone applications only. [4] (1) Blank or 0 referencing internal part number. |
|
|
"CS" Series Evaporator Unit[3] |
|
| CS(1)-(4)-(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"CT" Series Evaporator Unit[3] |
|
| (10)CT(1)(2)(3)-(4)-(5)(7) | |
| CTF(1)(2)(4)(3)-(15)(5)(7) | |
| HSE-(4)-(5)(7) | |
| HSF(1)(2)(4)(3)-(15)(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"CW" Series Evaporator Unit[3] |
|
| CW(1)(2)(3)-(4)-(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"DF" Series Evaporator Unit[3] |
|
| DF(1)(2)(3)-(4)-(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"DS" Series Evaporator Unit[3] |
|
| DS(1)-(4)-(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"EF" Series Evaporator Unit[5] |
|
| EF(1)(4)(6)(5)(7) | |
[5] NSF Certified production starting with date code 11/22/2013. |
|
|
"ELC" Series Evaporator Unit[3] |
|
| ELC(2)(3)-(4)-(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"EMC" Series Evaporator Unit[3] |
|
| EMC(2)(3)-(4)-(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"FL" Series Evaporator Unit[3] |
|
| FL(2)(3)-(4)-(1)-(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"FT" Series Evaporator Unit |
|
| FT(2)(3)-(4)(8)(9)-(5)(7) | |
|
"FW" Series Evaporator Unit[3] |
|
| FW(1)(2)(3)-(4)-(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"HI" Series Evaporator Unit[3] |
|
| HI17-(4)-(5)(7) - HI47-(4)-(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"HS" Series Evaporator Unit[3] |
|
| HS(1)50-XXX-(2)(7) - HS(1)174-XXX-(2)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"HSA" Series Evaporator Unit[3] |
|
| HSA(4)-(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"HT" Series Evaporator Unit[3] |
|
| HT(1)(2)(3)-(4)B-(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"HW" Series Evaporator Unit[3] |
|
| HW(1)(6)(2)-(4)-(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"IF" Series Evaporator Unit[3] |
|
| IF(1)(2)(3)-(4)-(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"IT" Series Evaporator Unit[3] |
|
| IT(1)(2)(3)-(4)-(5)(7) | |
| ITF(1)(2)(4)(3)-(15)(5)(7) | |
| MSF(1)(2)(4)(3)-(15)(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"L" Series Evaporator Unit[6] |
|
| L(1)(2)(3)(4)(5)(6)(7)(8)(9)(10) | |
[6] (1) Brand:
R – Russell Coil
W – Witt
C – Coldzone
K – Kramer
Z – Rheem
Note – Other brand designation may use other single letter code.
(2) Evaporator Product Family:
L - Low Profile
U - Low or Medium Profile Opposite end connections
E - Extra Low Profile (Center Mount)
V - Low Air Velocity
M – Medium size evaporator
H – Heavy Duty with right side piping connections
Y – Heavy Duty with Left side piping connections
R – Heat Reclaim with right side piping connections
W – Warehouse with right side piping connections
Z – Warehouse with left side piping connections
(3) Fins Per Inch:
2 -8 FPI
(4) Defrost Type:
A – Air
E – Electric
K – Hot Gas 3 pipe coil with hot gas drain pan
L – Hot Gas reverse with hot gas drain pan
H – Hot Gas (3 Pipe)
G – Hot Gas (Reverse Cycle)
(5) Nominal Size BTUH
(6) Voltage Code:
A - 115/1/60
D – 208-230/1/60
E – 208-230/3/60
F – 460/1/60
G – 460/3/60
H – 575/1/60
J – 575/3/60
L – 100/1/50
M – 200-220/1/50
N – 200-220/1/50
P – 380/1/50
Q – 380/3/50
S - 115-230/1/50-60 – ECM motors only
(7) Motor Type:
D – DUAL SPEED EC MOTOR
E - ECM
H – HIGH STATIC (PRESSURE DROP) TRUE THREE PHASE MOTOR
P – PSC
S - Shaded Pole
T – TRUE THREE PHASE MOTOR
V – Variable Speed MOTOR
(8) Revision Code:
* – Single letter
(9) Refrigerant Code:
Blank - no factory installed options
* – Refrigerants (Single letter code)
(10) Mounted Option Code:
Blank – No mounted options
* – Mounted Configurations (Single or Multiple letter code)
|
|
|
"LP" Series Evaporator Unit[3] |
|
| (1)(2)FPI(3)0041(4)(5)A(6)(7)[7] | |
| (1)(2)FPI(3)041(4)(5)A(6)(7)[7] | |
| LP-(4)-(5)(7) | |
[3] Certified for Splash Zone applications only.
[7] (1) R - Russell
C - Coldzone
K - Kramer
W - Witt
Z - Rheem
(2) E - Extra Low Profile
H - Heavy Duty
L - Low Profile
M - Medium Profile
R - Heat Reclaim
U - Opposite End Connection
V - Low Air Velocity
(3) Defrost Type
A - Air Defrost
E - Electric Defrost
G - Host Gas Reverse Cycle
H - Hot Gas 3-Pipe
(4) Voltage Code
A - 115/1/60
D - 208-230/1/60
E - 208-230/3/60
F - 460/1/60
G - 460/3/60
J - 575/3/60
(5) Motor Type
D - Dual Speed EC
E - Single Speed EC
P - PSC
T - Totally Enclosed
V - Variable Speed
(6) Blank - Standard Configuration
L -Mounted TXV,LLS, T-Stat
M - Master Configuration with TXV,LLS, T-Stat,Copper Tube
T - Mounted TXV only
(7) Refrigerant Type
A - R404A
B - R407A
C - R407C
D - R407F
E - R448A/R449A
F - CO2 DX
G - GLYCOL
H - R410A
J - R450A/513A
|
|
|
"LV" Series Evaporator Unit[3] |
|
| LV-(4)-(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"LW" Series Evaporator Unit[3] |
|
| LW(1)(2)(3)-(4)-(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"MP" Series Evaporator Unit[3] |
|
| (1)(2)FPI(3)0041(4)(5)A(6)(7)[4] | |
| (1)(2)FPI(3)041(4)(5)A(6)(7)[4] | |
| MP-(4)-(5)(7) | |
[3] Certified for Splash Zone applications only. [4] (1) Blank or 0 referencing internal part number. |
|
|
"MTW" Series Evaporator Unit |
|
| MTW(2)(3)-(4)(8)(9)-(5)(7) | |
|
"MU" Series Evaporator Unit |
|
| MDF(2)(3)-(4)(8)(9)-(5)(7) | |
| MUF(2)(3)-(4)(8)(9)-(5)(7) | |
|
"P" Series Evaporator Unit[3] |
|
| P(1)(6)(2)-(4) | |
[3] Certified for Splash Zone applications only. |
|
|
"S" Series Evaporator Unit[3] |
|
| (10)S(1)(2)(3)-(4)B-(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"SL" Series Evaporator Unit |
|
| SL(1)(2)(3)-(4)(8)(9)-(5)(7) | |
|
"SU" Series Evaporator Unit[3] |
|
| SU14-(4)(1)-(5)(7) - SU47-(4)(1)-(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"TT" Series Evaporator Unit |
|
| TT(2)(3)-(4)(8)(9)-(5)(7) | |
|
"TW" Series Evaporator Unit |
|
| TW(2)(3)-(4)(8)(9)-(5)(7) | |
|
"U" Series Evaporator Unit[3] |
|
| U(1)(6)(2)-(4)-(5)(7) | |
| UTF(1)(2)(4)(3)-(15)(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"UCP" Series Evaporator Unit[3] |
|
| UCP17-(4)(1)-(5)(7) - UCP25-(4)(1)-(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"V" Series Evaporator Unit[3] |
|
| V17-(4)-(5)(7) - V18-(4)-(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
"WA" Series Evaporator Unit |
|
| WA(2)(3)-(4)(8)(9)-(5)(7) | |
|
"WE" Series Evaporator Unit |
|
| WE(2)(3)-(4)(8)(9)-(5)(7) | |
|
"WF" Series Evaporator Unit[3] |
|
| (11) WF (4) (5) (7) (2) (6) (12) (13) (1) (14) | |
| AML(4)M(5)(7) | |
| ELL(4)M(5)(7) | |
| FLF(1)(2)(4)(3)-(15)(5)(7) | |
| KVF(1)(2)(4)(3)-(15)(5)(7) | |
[3] Certified for Splash Zone applications only. |
|
|
APEX Refrigeration Unit[5] |
|
| XN(4)(16)(1)(17)(5)(7) | |
| XT(4)(16)(1)(17)(5)(7) | |
[5] NSF Certified production starting with date code 11/22/2013. |
|
|
“E” & “V” Center Mount Series Evaporators[6] |
|
| E(1)(2)(3)(4)(5)(6)(7)(8)(9)(10) | |
| V(1)(2)(3)(4)(5)(6)(7)(8)(9)(10) | |
[6] (1) Brand:
R – Russell Coil
W – Witt
C – Coldzone
K – Kramer
Z – Rheem
Note – Other brand designation may use other single letter code.
(2) Evaporator Product Family:
L - Low Profile
U - Low or Medium Profile Opposite end connections
E - Extra Low Profile (Center Mount)
V - Low Air Velocity
M – Medium size evaporator
H – Heavy Duty with right side piping connections
Y – Heavy Duty with Left side piping connections
R – Heat Reclaim with right side piping connections
W – Warehouse with right side piping connections
Z – Warehouse with left side piping connections
(3) Fins Per Inch:
2 -8 FPI
(4) Defrost Type:
A – Air
E – Electric
K – Hot Gas 3 pipe coil with hot gas drain pan
L – Hot Gas reverse with hot gas drain pan
H – Hot Gas (3 Pipe)
G – Hot Gas (Reverse Cycle)
(5) Nominal Size BTUH
(6) Voltage Code:
A - 115/1/60
D – 208-230/1/60
E – 208-230/3/60
F – 460/1/60
G – 460/3/60
H – 575/1/60
J – 575/3/60
L – 100/1/50
M – 200-220/1/50
N – 200-220/1/50
P – 380/1/50
Q – 380/3/50
S - 115-230/1/50-60 – ECM motors only
(7) Motor Type:
D – DUAL SPEED EC MOTOR
E - ECM
H – HIGH STATIC (PRESSURE DROP) TRUE THREE PHASE MOTOR
P – PSC
S - Shaded Pole
T – TRUE THREE PHASE MOTOR
V – Variable Speed MOTOR
(8) Revision Code:
* – Single letter
(9) Refrigerant Code:
Blank - no factory installed options
* – Refrigerants (Single letter code)
(10) Mounted Option Code:
Blank – No mounted options
* – Mounted Configurations (Single or Multiple letter code)
|
|
|
“H” Large Profile Series Evaporators[6] |
|
| H(1)(2)(3)(4)(5)(6)(7)(8)(9)(10) | |
[6] (1) Brand:
R – Russell Coil
W – Witt
C – Coldzone
K – Kramer
Z – Rheem
Note – Other brand designation may use other single letter code.
(2) Evaporator Product Family:
L - Low Profile
U - Low or Medium Profile Opposite end connections
E - Extra Low Profile (Center Mount)
V - Low Air Velocity
M – Medium size evaporator
H – Heavy Duty with right side piping connections
Y – Heavy Duty with Left side piping connections
R – Heat Reclaim with right side piping connections
W – Warehouse with right side piping connections
Z – Warehouse with left side piping connections
(3) Fins Per Inch:
2 -8 FPI
(4) Defrost Type:
A – Air
E – Electric
K – Hot Gas 3 pipe coil with hot gas drain pan
L – Hot Gas reverse with hot gas drain pan
H – Hot Gas (3 Pipe)
G – Hot Gas (Reverse Cycle)
(5) Nominal Size BTUH
(6) Voltage Code:
A - 115/1/60
D – 208-230/1/60
E – 208-230/3/60
F – 460/1/60
G – 460/3/60
H – 575/1/60
J – 575/3/60
L – 100/1/50
M – 200-220/1/50
N – 200-220/1/50
P – 380/1/50
Q – 380/3/50
S - 115-230/1/50-60 – ECM motors only
(7) Motor Type:
D – DUAL SPEED EC MOTOR
E - ECM
H – HIGH STATIC (PRESSURE DROP) TRUE THREE PHASE MOTOR
P – PSC
S - Shaded Pole
T – TRUE THREE PHASE MOTOR
V – Variable Speed MOTOR
(8) Revision Code:
* – Single letter
(9) Refrigerant Code:
Blank - no factory installed options
* – Refrigerants (Single letter code)
(10) Mounted Option Code:
Blank – No mounted options
* – Mounted Configurations (Single or Multiple letter code)
|
|
|
“M” Medium Profile Series Evaporators[6] |
|
| M(1)(2)(3)(4)(5)(6)(7)(8)(9)(10) | |
[6] (1) Brand:
R – Russell Coil
W – Witt
C – Coldzone
K – Kramer
Z – Rheem
Note – Other brand designation may use other single letter code.
(2) Evaporator Product Family:
L - Low Profile
U - Low or Medium Profile Opposite end connections
E - Extra Low Profile (Center Mount)
V - Low Air Velocity
M – Medium size evaporator
H – Heavy Duty with right side piping connections
Y – Heavy Duty with Left side piping connections
R – Heat Reclaim with right side piping connections
W – Warehouse with right side piping connections
Z – Warehouse with left side piping connections
(3) Fins Per Inch:
2 -8 FPI
(4) Defrost Type:
A – Air
E – Electric
K – Hot Gas 3 pipe coil with hot gas drain pan
L – Hot Gas reverse with hot gas drain pan
H – Hot Gas (3 Pipe)
G – Hot Gas (Reverse Cycle)
(5) Nominal Size BTUH
(6) Voltage Code:
A - 115/1/60
D – 208-230/1/60
E – 208-230/3/60
F – 460/1/60
G – 460/3/60
H – 575/1/60
J – 575/3/60
L – 100/1/50
M – 200-220/1/50
N – 200-220/1/50
P – 380/1/50
Q – 380/3/50
S - 115-230/1/50-60 – ECM motors only
(7) Motor Type:
D – DUAL SPEED EC MOTOR
E - ECM
H – HIGH STATIC (PRESSURE DROP) TRUE THREE PHASE MOTOR
P – PSC
S - Shaded Pole
T – TRUE THREE PHASE MOTOR
V – Variable Speed MOTOR
(8) Revision Code:
* – Single letter
(9) Refrigerant Code:
Blank - no factory installed options
* – Refrigerants (Single letter code)
(10) Mounted Option Code:
Blank – No mounted options
* – Mounted Configurations (Single or Multiple letter code)
|
|
[1] All units may have a prefix "x" designating internal changes only.
[2] (1) Denotes one of the following:
A - Air defrost
E - Electric defrost
G - Reverse Cycle
H - Hot gas re-evap
W - Warm fluid (glycol units)
(2) Denotes a single digit number indicating number of fans.
(3) Denotes a single digit number indicating fin density in Fins Per Inc
(4) Indicates 1 to 4 numerical digits representing BTUH capacity x 100 or represents
capacity size relative to other models.
(5) Indicates single digit alpha character representing voltage code:
A - 115/60/1
B - 208/60/1
C - 230/60/1
D - 208-230/60/1
E - 208-230/60/3
F - 460/60/1
G - 460/60/3
H - 575/60/1
J - 575/60/3
(6) Single alpha character indicating fin density as follows:
U - 4 Fins per inch (Freezer)
L - 6 Fins per inch (Freezer)
M or B - 6 Fins per inch (Cooler)
H - 8 Fins per inch (Cooler)
X - Other
(7) Optional one or two digit alpha character indicating motor type.
(8) Optional 2-digit alpha character indicating coil coating. RP is approved.
(9) Optional single alpha character indicating specific customer options. W is
approved.
(10) Optional 1 to 3 letter prefix to denote OEM customer.
(11) Single alpha character to denote brand name
(12) Single number to indicate coil coating
1 - No coating, aluminum fins
2 - No coating, copper fins
other - Coated, aluminum fins
(13) Single number to indicate cabinet coating
1 - No coating, aluminum
4 - No coating, stainless
other - Coated, aluminum
(14) Optional, up to two characters to indicate revision level starting with "A".
(15) Optional, up to two characters to designate internal construction.
(16) Denotes medium or low temperature design.
M = Medium temperature
L = Low temperature
(17) two or three characters to denote refrigerant type.
|
|
Number of matching Manufacturers is 1
Number of matching Products is 145
Processing time was 0 seconds
