NSF Product and Service Listings

These NSF Official Listings are current as of Friday, November 14, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/food/Listings.asp?Standard=002&Company=C0053311&

NSF/ANSI 2
Food Equipment


 
Araven S.L. 
Polígono Industrial San Miguel
Calle Río Martín, no. 6 
Zaragoza 
Spain 
34 97 646 52 00
Visit this company's website

Facility : Zaragoza, Spain


ABS Gastronorm Containers[1] [2] [3]
  _ 4010
  _ 4011
  _ _796
  _ _797
  _ _798
  _ _808
  _ _816
  _ _817
  _ _818
  _ _819
  _ _820
  _ _821
  _ _822
  _ _823
  _ _826
  _ _827
  _ _828
  _ _831
  _ _834
  _ _835
  _ _836
  _ _837
  _ _838
  _ _839
  _ _840
  _ _841
  _ _842
  _ _843
  _ _844
  _ _845
  
[1] First digit "_" indicates the material:
    "9"--> Polycarbonate (PC)
    "0"--> Polypropylene (PP)
    "2"--> High Density PolyEthylene (HDPE)
    "7"--> ABS
[2] Only the last 3 or 4 digits of model number will be molded on product's permanent
    marking, whereas full 5-digit model number will appear on literature/advertising/website.
[3] First two digits "_ _" indicate the material:
    "09"--> Polycarbonate (PC)
    "07"--> ABS

ABS Pitchers
  _1401
  _1402
  _1403

ABS Square Containers[1] [2]
  _ 1900
  _ 1901
  _ 1902
  _ 1903
  _ 1904
  _ 1905
  _ 1906
  _1851
  _1852
  _1853
  _1854
  _1855
  _1856
  _1857
  
[1] First digit "_" indicates the material:
    "9"--> Polycarbonate (PC)
    "0"--> Polypropylene (PP)
    "2"--> High Density PolyEthylene (HDPE)
    "7"--> ABS
[2] Only the last 3 or 4 digits of model number will be molded on product's permanent
    marking, whereas full 5-digit model number will appear on literature/advertising/website.

Airtight Gastronorm Food Container 'Colorclip'
  3020
  3021
  3022
  3023
  3024
  3025
  3026
  3027
  3028
  3029
  3030
  3031
  3032
  3033
  3034
  3035
  3036
  3037
  3038
  3044
  3469
  470
  471
  61390
  61391
  61392
  61393
  61395
  61397

Black Gastronorm Containers[1] [2] [3]
  _ _4010
  _ _4011
  _ _796
  _ _797
  _ _798
  _ _808
  _ _816
  _ _817
  _ _818
  _ _819
  _ _820
  _ _821
  _ _822
  _ _823
  _ _826
  _ _827
  _ _828
  _ _831
  _ _834
  _ _835
  
[1] First digit "_" indicates the material:
    "9"--> Polycarbonate (PC)
    "0"--> Polypropylene (PP)
    "2"--> High Density PolyEthylene (HDPE)
    "7"--> ABS
[2] Only the last 3 or 4 digits of model number will be molded on product's permanent
    marking, whereas full 5-digit model number will appear on literature/advertising/website.
[3] First two digits "_ _" indicate the material:
    "09"--> Polycarbonate (PC)
    "07"--> ABS

Colander
  03171

Containers
  01170
  01171

Drainage/Defrost Kit
  01260

Drainage/Defrost Kit Gastronorm 2-1
  01829

Fast Food Tray[4]
  _ _046
  _ _047
  _ _048
  _ _049
  
[4] For splash zone/soiled dishware applications only.

GN 2/1 Containers[2] [3]
  _ 4069
  _ 4070
  _ 4079
  _ 4080
  
[2] Only the last 3 or 4 digits of model number will be molded on product's permanent
    marking, whereas full 5-digit model number will appear on literature/advertising/website.
[3] First two digits "_ _" indicate the material:
    "09"--> Polycarbonate (PC)
    "07"--> ABS

Gastronorm 2-1 Containers[1] [2]
  _4069
  _4070
  _4071
  _4071
  _4079
  _4080
  
[1] First digit "_" indicates the material:
    "9"--> Polycarbonate (PC)
    "0"--> Polypropylene (PP)
    "2"--> High Density PolyEthylene (HDPE)
    "7"--> ABS
[2] Only the last 3 or 4 digits of model number will be molded on product's permanent
    marking, whereas full 5-digit model number will appear on literature/advertising/website.

Gastronorm Food Pans 4000 Series[1] [2]
  _4010
  _4011
  _4012
  _4015
  _4016
  _4017
  _4019
  _4020
  _4021
  _4025
  _4026
  _4027
  _4034
  _4035
  _4036
  _4037
  _4051
  _4052
  _4058
  _4059
  _4060
  _4061
  _4073
  _4075
  _4076
  _4078
  
[1] First digit "_" indicates the material:
    "9"--> Polycarbonate (PC)
    "0"--> Polypropylene (PP)
    "2"--> High Density PolyEthylene (HDPE)
    "7"--> ABS
[2] Only the last 3 or 4 digits of model number will be molded on product's permanent
    marking, whereas full 5-digit model number will appear on literature/advertising/website.

HDPE Defrost Kit
  01828

Ingredient Bin
  00919
  00920

Lids
  04014
  09852
  09853
  09854
  09855
  09856

PC Gastronorm Containers[2] [3]
  _ _796
  _ _797
  _ _798
  _ _808
  _ _816
  _ _817
  _ _818
  _ _819
  _ _820
  _ _821
  _ _822
  _ _823
  _ _824
  _ _825
  _ _826
  _ _827
  _ _828
  _ _829
  _ _831
  _ _834
  _ _835
  _ _836
  _ _837
  _ _838
  _ _839
  _ _840
  _ _841
  _ _842
  _ _843
  _ _844
  _ _845
  
[2] Only the last 3 or 4 digits of model number will be molded on product's permanent
    marking, whereas full 5-digit model number will appear on literature/advertising/website.
[3] First two digits "_ _" indicate the material:
    "09"--> Polycarbonate (PC)
    "07"--> ABS

PC Pitchers
  _1401
  _1402
  _1403

PC Square Containers[1] [2]
  _ 1900
  _ 1901
  _ 1902
  _ 1903
  _ 1904
  _ 1905
  _ 1906
  _1851
  _1852
  _1853
  _1854
  _1855
  _1856
  _1857
  
[1] First digit "_" indicates the material:
    "9"--> Polycarbonate (PC)
    "0"--> Polypropylene (PP)
    "2"--> High Density PolyEthylene (HDPE)
    "7"--> ABS
[2] Only the last 3 or 4 digits of model number will be molded on product's permanent
    marking, whereas full 5-digit model number will appear on literature/advertising/website.

PP Pitchers
  _1401
  _1402
  _1403

PP Square Containers
  11851
  11852
  11853
  11854
  11855
  11856
  11857

COMPONENTS:

Grill Drain Trays for Containers
  00241
  00242
  00243
  00254
  00256
  01923

Lid
  01489

Lid for Gastronorm 2-1 Containers[1] [2]
  _4071
  
[1] First digit "_" indicates the material:
    "9"--> Polycarbonate (PC)
    "0"--> Polypropylene (PP)
    "2"--> High Density PolyEthylene (HDPE)
    "7"--> ABS
[2] Only the last 3 or 4 digits of model number will be molded on product's permanent
    marking, whereas full 5-digit model number will appear on literature/advertising/website.

Lid for Gastronorm Food Pans[1] [2]
  _4013
  _4018
  _4022
  _4029
  _4038
  _4054
  _4062
  
[1] First digit "_" indicates the material:
    "9"--> Polycarbonate (PC)
    "0"--> Polypropylene (PP)
    "2"--> High Density PolyEthylene (HDPE)
    "7"--> ABS
[2] Only the last 3 or 4 digits of model number will be molded on product's permanent
    marking, whereas full 5-digit model number will appear on literature/advertising/website.

PE Lid for Pitchers
  _1400

Pseudo-Hermetic Lid[1] [2]
  _7390
  _7391
  _7392
  _7393
  _7394
  _7395
  
[1] First digit "_" indicates the material:
    "9"--> Polycarbonate (PC)
    "0"--> Polypropylene (PP)
    "2"--> High Density PolyEthylene (HDPE)
    "7"--> ABS
[2] Only the last 3 or 4 digits of model number will be molded on product's permanent
    marking, whereas full 5-digit model number will appear on literature/advertising/website.

Number of matching Manufacturers is 1
Number of matching Products is 230
Processing time was 1 seconds