NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, January 15, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/food/Listings.asp?Standard=002&Company=C0178893&

NSF/ANSI 2
Food Equipment


 
QC Industries LLC 
4057 Clough Woods Drive
Batavia, OH 45103 
United States 
513-753-6000
Visit this company's website

Facility : Batavia, OH


Conveyer Systems - COMPONENTS

FS100 Conveyor[1] [2]
  FS(1)(00)(C)-(10)-(142)-(B)(05)-(CV1)
  
[1] Certification starting with serial number 910000.
[2] (1) Mechanical specification
    (00) Application ID
    (C) Single alphabetical digit indicating drive location, A, B, C, or D are acceptable.
        A - left hand pulling
        B - Right hand pulling
        C - Right hand pushing, D= Left hand pushing
    (10) 2 numerical digits indicating width of conveyor in inches.
         Example 10 - 10" wide
    (142) Up to three numerical digits indicating length of conveyor in inches.
          Example 142 - 142" Long
    (B) Alphabetical digit indicating drive mount position, Bottom or Side.
    (05) 2 numerical digits indicating gearbox ratio.
         Example B - Bottom mount.
                 05 - 5:1 gearbox ratio
    (CV1) Three letter suffix indicating kitchen placement for the client's customer.

HydroClean[1] [3]
  HEA1H(1)-(2)-(3)S(4)-(5)
  
[1] Certification starting with serial number 910000.
[3] (1) 2 numerical digits indicating width of conveyor in inches.  Example: 04 = 
        4" wide,  24 = 24" wide		
    (2) Up to three numerical digits indicating length of conveyor in inches. 
        Example: 60 = 60" Long,  216 = 216" Long				
    (3) Single alphabetical digit indicating drive location, A, B, C, or D are 
        acceptable.  A = Left hand pulling, B= Right hand pulling, C = Right 
        hand pushing, D = Left hand pushing				
    (4) Single numerical digit indicating frame mounting holes information, 1, 2, 3, 4, 5 
        or 6 are acceptable.  1 = no holes, 2 = side rail holes 3 = holes for stands 4 = 
        holes for stands and side rail holes, 5 = heavy duty motor stands, and 6 = heavy 
        duty motor stands and side rail holes				
    (5) Three alphabetical digits indicating type of conveyor belt material used on model, 
        KVA, KVB, PVF and MVG are acceptable.

PF Conveyor
  PF32(1)-250-1920-UVK (2)[1] [4]
  PF5(1)(2)-250-(3)-UVK (4)[5]
  
[1] Certification starting with serial number 910000.
[4] (1) Single alphabetical digit indicating drive location, A,B,C, or D are acceptable.  
        A = Left hand pulling, B= Right hand pulling, C = Right hand pushing, D = Left 
        hand pushing
    (2) May contain a three letter suffix indicating kitchen placement for the client's
        customer.
[5] (1) Side Guarding layout designator. Number 0-9 Only difference in models is length
        and or start point of side guarding
    (2) Single alphabetical digit indicating drive location, A,B,C, or D are acceptable.  
        A = Left hand pulling, B= Right hand pulling, C = Right hand pushing, D = Left 
        hand pushing
    (3) Up to four numerical digits indicating length of conveyor in millimeters.
        Example: 1920 = 1920mm Long.
    (4) May contain a three letter suffix indicating kitchen placement for the client's
        customer.

Number of matching Manufacturers is 1
Number of matching Products is 4
Processing time was 0 seconds