NSF Product and Service Listings

These NSF Official Listings are current as of Monday, May 25, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/food/Listings.asp?Standard=002&Company=C0253685&

NSF/ANSI 2
Food Equipment


 
Fenix Sol LLC 
316 California Avenue
Suite 910 
Reno, NV 89509 
United States 
775-391-8602

Facility : # 1 China


Dish Shelf[4]
  (1)-(2)-TS-(5)
  
[4] (1) 16 indicate the thickness of the material 1.5mm; 18 indicate the thickness of the
    material 1.2mm       
    (2) 3 indicate metal type 304; 4 indicate metal type 430      
    (3) QTY of shelves: 1-single, 2-double       
    (4) indicate Width in inches    
    (5) indicate Length in inches

Dish Table[3]
  (1)-CDT(2)-(3)(4)
  (1)-DDT(2)-(3)(4)
  (1)-UDT(2)-(3)(4)
  
[3] (1) Indicates the thickness of the material:
        16 (1.5mm)   
        14 (2.0mm)
        18 (1.2mm)    
    (2) Indicates the metal Type legs: 
        G - Galvanized
        S - Stainless
    (3) Indicates length in inches
    (4) Indicates drainboard configuration: 
        L   - Left 
        R   - Right 
        LSP - L Shape

Hand Sink[5]
  SWHS-(1)
  SWHS-(1)-(2)
  WHS-(1)
  WHS-(1)-(2)
  
[5] (1) Indicates length  in inches from left to right   
    (2) SP-Side Splashes; BR-Brackets; PS-Pedestal base; SH- Single hole; SS-Side splashes

Sink[2]
  (1)(2)-(3)C(4)X(5)-(6)(7)
  
[2] (1) Indicates the thickness of the material:
        16 (1.5mm)   
        18 (1.2mm)   
        14 (2.0mm)
    (2) Indicates the metal type legs:
        G - Galvanized
        S - Stainless
    (3) Indicates number of compartments
    (4) Indicates tub Length (from left to right)
    (5) Indicates tub Width (from front to back)
    (6) Direction of drainboard or no drainboard
        L - Left 
        R - Right  
        0 - No DB
        2 - Left and Right 
    (7) Drainboard length in inches

Slant Rack Shelf[4]
  (1)-(2)-SLS-(5)
  
[4] (1) 16 indicate the thickness of the material 1.5mm; 18 indicate the thickness of the
    material 1.2mm       
    (2) 3 indicate metal type 304; 4 indicate metal type 430      
    (3) QTY of shelves: 1-single, 2-double       
    (4) indicate Width in inches    
    (5) indicate Length in inches

Wall Shelf[4]
  (1)-(2)-TMS-(3)-(4)X(5)
  (1)-(2)-WMS-(4)X(5)
  (1)-(2)-WMS-(4)X(5)PR
  WMS-(4)(5)
  
[4] (1) 16 indicate the thickness of the material 1.5mm; 18 indicate the thickness of the
    material 1.2mm       
    (2) 3 indicate metal type 304; 4 indicate metal type 430      
    (3) QTY of shelves: 1-single, 2-double       
    (4) indicate Width in inches    
    (5) indicate Length in inches

Work Table[1]
  (1)-(2)-ES(3)X(4)(5)
  (1)-(2)-WT(3)X(4)(5)
  (1)-(2)-WT(3)X(4)(5)-(6)
  
[1] (1) 16 indicates the thickness of the material 1.5mm
        18 indicates the thickness of the material 1.2mm
    (2) 3 indicates metal type 304
        4 indicates metal type 430
    (3) Indicates width in inches
    (4) Indicates length in inches
    (5) Indicates yype under table: 
        G  - Galvanized
        S  - Stainless
        GB - Without under, legs are galvanized
        SB - Without under ,legs are stainless
    (6) Backsplash height in inches

Number of matching Manufacturers is 1
Number of matching Products is 17
Processing time was 0 seconds