NSF Product and Service Listings

These NSF Official Listings are current as of Wednesday, July 16, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/food/Listings.asp?Standard=002&Company=C0555083&

NSF/ANSI 2
Food Equipment


 
Shenzhen SNC Opto Electronic Co., Ltd 
Floor 3-6, Blk. 6 & 21, Zhengdaan, Ind.
Park, No. 172 Xiangshan Rd., Luotian 
Yanluo, Shenzhen, Guangdong 518105 
China 
86 136 3269 6460

Facility : Guangdong, China


LED Lamp for Splash Zone and Non Food Zone[1]

  AST-CLW08E-036WXYA1-adcK
  AST-CLW08E-045WXYA1-adcK
  AST-CLW08E-054WXYA1-adcK
  AST-CLW08E-054WXYA1-adcK
  AST-CLW08E-080WXYZA1-adbcK
  AST-CLW08E-100WXYZA1-adbcK
  AST-CLW08E-120WXYZA1-adbcK 

[1] (1) “X” can be any letter for LED manufacturer
    (2) “Y” can be “F” or “C” for diffuser types
        (F - frosted type, C - clear type)
    (3) “Z” - can be “N”, “M”, “C” or “P” for sensor type
        “N” - no sensor
        “M” - motion sensor,
        “C” - Continuous dimming knob switch
        “P” - PIR sensor
    (4) “a” - can be blank
        “E” or “EX” - lamp base type (“E” for E39, “EX” for EX39)
    (5) “d” - can be “L”, “S” or blank - dimming type (“L” -
        continuous dimming, “S” - step dimming, blank - not
        dimming)
    (6) “b” - can be “P”, “M” or blank
    (7) “c” - CAXX, XX - can be two digits for CCT

LED Linear High Bay Light Fixture for Food Zone, splash Zone and Non Food Zone

PHB14 Series[2]
  AST-PHB14-105WXYZC1-abcdefg
  AST-PHB14-105WXYZH1-abcefg
  AST-PHB14-120WXYZC1-abcdefg
  AST-PHB14-120WXYZH1-abcefg
  AST-PHB14-150WXYZC1-abcdefg
  AST-PHB14-150WXYZH1-abcefg
  AST-PHB14-200WXYZC1-abcdefg
  AST-PHB14-200WXYZH1-abcefg
  AST-PHB14-255WXYZC1-abcdefg
  AST-PHB14-255WXYZH1-abcefg
  AST-PHB14-300WXYZC1-abcdefg
  
[2] (1)“X” can be any letter(s) and/or digit(s) for manufacturer of LED;
    (2)“Y” can be any letter(s) and/or digit(s) (e.g. “F”, “G”, “M”, “C”, “S”, “CP”, “FP”,
    “V”, “V1”) or blank for Diffuser type;
    (3)"Z" can be any letters and digits for manufacturer of LED driver;
    (4) “a” can be any two letters for housing colors;
    (5) “b” can be “DMS”, “DPS” or blank for Sensor provided or not;
    (6) “c” can be blank for no wire guard;
    (7) “d” can be “EM” or blank for emergency driver provided or not;
    (8) “e” can be any digits for CCT;
    (9) “f” can be “W” or blank for Power Tunable Module provided or not;
    (10) “g” can be “D” for CCT Tunable or “S” for untunable.

PHBE05 Series[3]
  AST-PHBE05-165WXYZA1-abcefg
  AST-PHBE05-165WXYZC1-abcefg
  AST-PHBE05-165WXYZH1-abcefg
  AST-PHBE05-230WXYZA1-abcefg
  AST-PHBE05-230WXYZC1-abcefg
  AST-PHBE05-230WXYZH1-abcefg
  
[3] (1)“X” can be any letter(s) and/or digit(s) for manufacturer of LED;
    (2)“Y” can be any letter(s) and/or digit(s) (e.g. “F”, “G”, “M”, “C”, “S”, “CP”, “FP”,
    “V”, “S1”) or blank for Diffuser type;
    (3)"Z" can be any letters and digits for manufacturer of LED driver;                    
                                                                                            
                  
     (4)"a" can be any two letters for lamp colors;
     (5)“b” can be “DMS”, “DPS” or blank for Sensor provided or not;
     (6)"c" can be blank for no wire guard ; 
     (7)"d" can be “EM” or blank for emergency driver provided or not;
     (8)“e” can be any digits for CCT;;
     (9)“f” can be “W” or blank for Power Tunable Module provided or not;
     (10)“g” can be “D” for CCT Tunable.

LED Linear High Bay Light Fixture for splash Zone and Non Food Zone

PHBE05 Series[3]
  AST-PHBE05-165WXYZA1-abcdefg
  AST-PHBE05-165WXYZC1-abcdefg
  AST-PHBE05-230WXYZA1-abcdefg
  AST-PHBE05-230WXYZC1-abcdefg
  
[3] (1)“X” can be any letter(s) and/or digit(s) for manufacturer of LED;
    (2)“Y” can be any letter(s) and/or digit(s) (e.g. “F”, “G”, “M”, “C”, “S”, “CP”, “FP”,
    “V”, “S1”) or blank for Diffuser type;
    (3)"Z" can be any letters and digits for manufacturer of LED driver;                    
                                                                                            
                  
     (4)"a" can be any two letters for lamp colors;
     (5)“b” can be “DMS”, “DPS” or blank for Sensor provided or not;
     (6)"c" can be blank for no wire guard ; 
     (7)"d" can be “EM” or blank for emergency driver provided or not;
     (8)“e” can be any digits for CCT;;
     (9)“f” can be “W” or blank for Power Tunable Module provided or not;
     (10)“g” can be “D” for CCT Tunable.

LED TRI-PROOF LIGHT for Food Zone, Splash Zone and Non Food Zone

TR04 Series[4]
  AST-TR04-100W8FTXYA1-abcdefg
  AST-TR04-100W8FTXYC1-abcdeg
  AST-TR04-30W2FTXYA1-abdefg
  AST-TR04-30W2FTXYA2-abdefg
  AST-TR04-30W2FTXYC1-abcdefg
  AST-TR04-50W4FTXYA1-abcdefg
  AST-TR04-50W4FTXYA2-abcdefg
  AST-TR04-50W4FTXYC1-abcdefg
  AST-TR04-80W8FTXYA1-abcdefg
  AST-TR04-80W8FTXYC1-abcdefg
  AST-TR04-85W8FTXYA2-abcdefg
  AST-TR04-90W8FTXYA1-abcdefg
  AST-TR04-90W8FTXYC1-abcdefg
  
[4] (1)“X” can be any alphabet(s) and/or digit for LED manufacturer;
    (2)“Y” can be any letter for Diffuser type (e.g. R=Matte Strip, T=Frosted Stripe, C =
    Clear type);
    (3)"a” can be any two letters for Housing color; GR= Gray, or Customized.
    (4)"b” can be “M” or blank for Motion Sensor provided or not;
    (5)“c” can be “E” or blank for Emergency Driver provided or not;
    (6)“d” can be “D” for CCT Tunable;
    (7)"e" can be any digits for CCT,
    (8)"f" can be "R" or blank,
    (9)"g" can be "W" or blank for Adjusting Power Function provided or not.

UFO High Bay Light Fixture for Food Zone, Splash Zone and Non Food Zone

HB09 Series[5]
  AST-HB09-100WZXYA1-abcdefg
  AST-HB09-100WZXYC1-abcdefg
  AST-HB09-100WZXYH1-abcdefg
  AST-HB09-150WZXYA1-abcdefg
  AST-HB09-150WZXYC1-abcdefg
  AST-HB09-150WZXYH1-abcdefg
  AST-HB09-200WZXYA1-abcdefg
  AST-HB09-200WZXYC1-abcdefg
  AST-HB09-200WZXYH1-abcdefg
  AST-HB09-240WZXYA1-abcdefg
  AST-HB09-240WZXYC1-abcdefg
  AST-HB09-240WZXYH1-abcdefg
  AST-HB09-300WZXYA1-abcdefg
  AST-HB09-300WZXYC1-abcdefg
  AST-HB09-300WZXYH1-abcdefg
  
[5] (1) "Z" can be any letters and digits for manufacturer of LED driver;
    (2) "X" can be any alphanumeric digit for manufacturer of LED;
    (3) "Y" can be any alphanumeric characters for Diffuser types (e.g. "S1" to "S9" for
    different plastic Diffuser light angle types, "CP" for flat clear or "FP" for frost
    plastic);
    (4) "a" can be any two letters for lamp colors;
    (5) "b" can be "10SP", "20SP" or blank for Surge-Protective Device provided or not, 
    (6) "c" can be "M", "P" or blank for Motion Sensor, PIR sensor provided or not;
    (7) "d" can be any digits for CCT;
    (8) "e" can be "RP", "RA" or blank for Shade provided or not;
    (9) "f" can be "W" or blank for Power Tunable Module provided or not;
    (10) "g" can be "D" for CCT tunable or "S" for CCT untunable.

HB26 series
  AST-HB26-100WZXYA1-abcdefg[25]
  AST-HB26-100WZXYC1-abcdefg[25]
  AST-HB26-100WZXYH1-abcdefg[25]
  AST-HB26-150WZXYA1-abcdefg[25]
  AST-HB26-150WZXYC1-abcdefg[25]
  AST-HB26-150WZXYH1-abcdefg[25]
  AST-HB26-200WZXYA1-abcdefg[25]
  AST-HB26-200WZXYC1-abcdefg[25]
  AST-HB26-200WZXYH1-abcdefg[25]
  AST-HB26-240WZXYA1-abcdefg[25]
  AST-HB26-240WZXYC1-abcdefg[25]
  AST-HB26-240WZXYH1-abcdefg[25]
  
[25] (1)"Z" can be any letters and digits for manufacturer of LED driver;
     (2)“X” can be any letter and/or digit for manufacturer and type of LED;
     (3) Y” can be any letters and/or digits for Different Diffuser Light Angle type employed
     (e.g. 100/80/60, T1, etc.);
     (4) “a” can be any two letters for lamp colors; 
     (5) “b” can be “S”, “EM” or blank for Surge-Protective Device, Emergency Driver provided
     or not;
     (6)“c” can be “M”, “P” or blank for DC Motion Sensor, DC PIR sensor provided or not;
     (7)“d” can be any digits for CCT;
     (8)“e” can be “W”  for Power Tunable Module provided; 
     (9)“f” can be “D” for CCT tunable;
     (10)“g” can be “RP”, “RA” or blank for thermoplastic shade, aluminum shade or no shade
     provided.

UFO High Bay for Splash Zone and Non Food Zone

HB09 Series
  AST-HB09-100WZXYA1-abcde[6]
  AST-HB09-100WZXYA1-abcdefg[7]
  AST-HB09-100WZXYC1-abcde[6]
  AST-HB09-100WZXYC1-abcdefg[7]
  AST-HB09-100WZXYH1-abcde[6]
  AST-HB09-100WZXYH1-abcdefg[7]
  AST-HB09-150WZXYA1-abcde[6]
  AST-HB09-150WZXYA1-abcdefg[7]
  AST-HB09-150WZXYC1-abcde[6]
  AST-HB09-150WZXYC1-abcdefg[7]
  AST-HB09-150WZXYH1-abcde[6]
  AST-HB09-150WZXYH1-abcdefg[7]
  AST-HB09-200WZXYA1-abcde[6]
  AST-HB09-200WZXYA1-abcdefg[7]
  AST-HB09-200WZXYC1-abcde[6]
  AST-HB09-200WZXYC1-abcdefg[7]
  AST-HB09-200WZXYH1-abcde[6]
  AST-HB09-200WZXYH1-abcdefg[7]
  AST-HB09-240WZXYA1-abcde[6]
  AST-HB09-240WZXYA1-abcdefg[7]
  AST-HB09-240WZXYC1-abcde[6]
  AST-HB09-240WZXYC1-abcdefg[7]
  AST-HB09-240WZXYH1-abcde[6]
  AST-HB09-240WZXYH1-abcdefg[7]
  AST-HB09-300WZXYA1-abcde[6]
  AST-HB09-300WZXYA1-abcdefg[7]
  AST-HB09-300WZXYC1-abcde[6]
  AST-HB09-300WZXYC1-abcdefg[7]
  AST-HB09-300WZXYH1-abcde[6]
  AST-HB09-300WZXYH1-abcdefg[7]
  
[6] (1) "Z" can be any letters and digits for LED Driver;
    (2) "X" can be any alphanumeric digit for manufacturer of LED;
    (3) "Y" can be any alphanumeric characters for Diffuser type (e.g. FP - flat
        frost plastic, CP -flat clear plastic or "S1" to "S9" for different Diffuser
        light angle type employed);
    (4) "a" can be any two letters for lamp colors;
    (5) "b" can be "10SP", "20SP" or blank for Surge-Protective Device
         provided or not;
    (6) "c" can be "M", "P" or blank for Motion Sensor, PIR sensor provided or
         not;
    (7) "d" can be any digits for CCT;
    (8) "e" can be "R" or blank for different LED module.
[7] (1)"Z" can be any letters and digits for manufacturer of LED driver
    (2)"X" can be any alphanumeric digit for manufacturer of LED
    (3)"Y"can be any alphanumeric characters for Diffuser types (e.g. "S1" to "S9" for
    different plastic Diffuser 
           light angle types, "CP" for flat clear or "FP" for frost plastic)
    (4)"a" can be any two letters for lamp colors
    (5)"b" can be "10SP", "20SP" or blank for Surge-Protective Device provided or not,
    (6)"c" can be "M", "P" or 
          blank for Motion Sensor, PIR sensor provided or not
    (7)"d" can be any digits for CCT
    (8)"e" can be "RP", "RA" or blank for Shade provided or not
    (9) "f" can be "W" or blank for Power Tunable Module provided or not
    (10)"g" can be "D" for CCT tunable or "S" for CCT untunable

HB10, HB12, HB11B Series
  AST-HB10-100/XXX/YYYWZXYA1-abcdef[8]
  AST-HB10-100/XXX/YYYWZXYC1-abcdef[8]
  AST-HB10-100/XXX/YYYWZXYH1-abcdef[8]
  AST-HB10-150/XXX/YYYWZXYA1-abcdef[8]
  AST-HB10-150/XXX/YYYWZXYC1-abcdef[8]
  AST-HB10-150/XXX/YYYWZXYH1-abcdef[8]
  AST-HB10-200/XXX/YYYWZXYA1-abcdef[8]
  AST-HB10-200/XXX/YYYWZXYC1-abcdef[8]
  AST-HB10-200/XXX/YYYWZXYH1-abcdef[8]
  AST-HB10-240/XXX/YYYWZXYA1-abcdef[8]
  AST-HB10-240/XXX/YYYWZXYC1-abcdef[8]
  AST-HB10-240/XXX/YYYWZXYH1-abcdef[8]
  AST-HB11B-100/XXX/YYYWZXYA1-abcdef[8]
  AST-HB11B-100/XXX/YYYWZXYC1-abcdef[8]
  AST-HB11B-100/XXX/YYYWZXYH1-abcdef[8]
  AST-HB11B-100WZXYC1-abcdefg[09]
  AST-HB11B-100WZXYH1-abcdefg[09]
  AST-HB11B-150/XXX/YYYWZXYA1-abcdef[8]
  AST-HB11B-150/XXX/YYYWZXYC1-abcdef[8]
  AST-HB11B-150/XXX/YYYWZXYH1-abcdef[8]
  AST-HB11B-150WZXYC1-abcdefg[09]
  AST-HB11B-150WZXYH1-abcdefg[09]
  AST-HB11B-200/XXX/YYYWZXYA1-abcdef[8]
  AST-HB11B-200/XXX/YYYWZXYC1-abcdef[8]
  AST-HB11B-200/XXX/YYYWZXYH1-abcdef[8]
  AST-HB11B-200WZXYC1-abcdefg[09]
  AST-HB11B-200WZXYH1-abcdefg[09]
  AST-HB11B-240/XXX/YYYWZXYA1-abcdef[8]
  AST-HB11B-240/XXX/YYYWZXYC1-abcdef[8]
  AST-HB11B-240/XXX/YYYWZXYH1-abcdef[8]
  AST-HB11B-240WZXYC1-abcdefg[09]
  AST-HB11B-240WZXYH1-abcdefg[09]
  AST-HB12-100/XXX/YYYWZXYA1-abcdef[8]
  AST-HB12-100/XXX/YYYWZXYC1-abcdef[8]
  AST-HB12-100/XXX/YYYWZXYH1-abcdef[8]
  AST-HB12-150/XXX/YYYWZXYA1-abcdef[8]
  AST-HB12-150/XXX/YYYWZXYC1-abcdef[8]
  AST-HB12-150/XXX/YYYWZXYH1-abcdef[8]
  AST-HB12-200/XXX/YYYWZXYA1-abcdef[8]
  AST-HB12-200/XXX/YYYWZXYC1-abcdef[8]
  AST-HB12-200/XXX/YYYWZXYH1-abcdef[8]
  AST-HB12-240/XXX/YYYWZXYA1-abcdef[8]
  AST-HB12-240/XXX/YYYWZXYC1-abcdef[8]
  AST-HB12-240/XXX/YYYWZXYH1-abcdef[8]
  AST-HB13-100WZXYA1-abcde[10]
  AST-HB13-100WZXYC1-abcde[10]
  AST-HB13-100WZXYH1-abcde[10]
  AST-HB13-150WZXYA1-abcde[10]
  AST-HB13-150WZXYC1-abcde[10]
  AST-HB13-150WZXYH1-abcde[10]
  AST-HB13-200WZXYA1-abcde[10]
  AST-HB13-200WZXYC1-abcde[10]
  AST-HB13-200WZXYH1-abcde[10]
  AST-HB13-240WZXYA1-abcde[10]
  AST-HB13-240WZXYC1-abcde[10]
  AST-HB13-240WZXYH1-abcde[10]
  AST-HB14-100WZXYA1-abcde[10]
  AST-HB14-100WZXYC1-abcde[10]
  AST-HB14-100WZXYH1-abcde[10]
  AST-HB14-150WZXYA1-abcde[10]
  AST-HB14-150WZXYC1-abcde[10]
  AST-HB14-150WZXYH1-abcde[10]
  AST-HB14-200WZXYA1-abcde[10]
  AST-HB14-200WZXYC1-abcde[10]
  AST-HB14-200WZXYH1-abcde[10]
  AST-HB14-240WZXYA1-abcde[10]
  AST-HB14-240WZXYC1-abcde[10]
  AST-HB14-240WZXYH1-abcde[10]
  AST‐HB10‐100WZXYA1‐abcdeg[11]
  AST‐HB10‐100WZXYC1‐abcdeg[11]
  AST‐HB10‐150WZXYA1‐abcdeg[11]
  AST‐HB10‐150WZXYC1‐abcdeg[11]
  AST‐HB10‐200WZXYA1‐abcdeg[11]
  AST‐HB10‐200WZXYC1‐abcdeg[11]
  AST‐HB10‐240WZXYA1‐abcdeg[11]
  AST‐HB10‐240WZXYC1‐abcdeg[11]
  AST‐HB11B‐100WZXYA1‐abcdefg[09]
  AST‐HB11B‐150WZXYA1‐abcdefg[09]
  AST‐HB11B‐200WZXYA1‐abcdefg[09]
  AST‐HB11B‐240WZXYA1‐abcdefg[09]
  
[8] (1) "XXX" can be any digits less or equal to input wattage, /XXX can be blank;
    (2) "YYY" can be any digits less or equal to input wattage, /YYY can be blank;
    (3) "Z" can be any letters and digits for LED Driver;
    (4) "X" can be any alphanumeric digit for manufacturer of LED;
    (5) "Y" can be "FP", "CP" or "T1CP" for Diffuser type (e.g. FP - frost plastic,
        CP - flat clear plastic, T1CP - flat clear with T1 angle) or "T1" to "T9" 
        for different Diffuser light angle type employed;
    (6) "a" can be any two letters for lamp colors;
    (7) "b" can be "10SP", "20SP" or blank for Surge-Protective Device
         provided or not;
    (8) "c" can be "M", "P" or blank for DC Motion Sensor, DC PIR Sensor
        provided or not;
    (9) "d" can be "XX/YY/ZZK" or "XXK" for CCT Tunable Module provided or not(XX/, YY/, 
        ZZ can be any digits or blank);
    (10) "e" can be "W" or blank for Power Tunable Module provided or not
    (11) "f" can be "R" or blank for LED Module with resistance or without
         resistance.
[09] (1) "Z" can be any letters and digits for manufacturer of LED driver;
     (2) "X" can be any alphanumeric digit for manufacturer of LED;
     (3) "Y" can be "FP", "CP" or "T1CP" for Diffuser type (e.g. FP - frost plastic, CP - 
         flat clear plastic, T1CP - flat clear with T1 angle) or "T1" to "T9" for different 
         Diffuser light angle type employed;
     (4) "a" can be any two letters for lamp colors;
     (5) "b" can be "10SP", "20SP" or blank for Surge-Protective Device provided or not;
     (6) "c" can be "M","P" or blank for DC Motion Sensor, DC PIR sensor provided or not;
     (7) "d" can be any digits for CCT;
     (8) "e" can be "RP", "RA" or blank for Shade provided or not;
     (9) "f" can be "W" or blank for Power Tunable Module provided or not;
     (10) "g" can be "D" for CCT tunable or "S" for CCT untunable.
[10] (1) "Z" can be any letters and digits for manufacturer of LED driver;
     (2) "X" can be any alphanumeric digit for LED type;
     (3) "Y" can be "FP", "CP" or "T1CP" for Diffuser type (e.g. FP - frost plastic, CP - 
         flat clear plastic, T1CP - flat clear with T1 angle) or "T1" to "T9" for different 
         Diffuser light angle type employed;
     (4) "a" can be any two letters for lamp colors;
     (5) "b" can be "10SP", "20SP", "S" or blank for Surge-Protective Device provided or 
         not;
     (6) "c" can be "M","M1", "M2", "P" or blank for Motion Sensor, PIR sensor provided or 
         not;
     (7) "d" can be any digits for CCT;
     (8) "e" can be "RP" or "RA" for Shade type provided or blank for not provided.
[11] (1) "Z" can be any letters and digits for manufacturer of LED driver;
     (2) "X" can be any alphanumeric digit for LED type;
     (3) "Y" can be "FP", "CP" or "T1CP" for Diffuser type (e.g. FP - frost plastic, CP - 
         flat clear plastic, T1CP - flat clear with T1 angle) or "T1" to "T9" for different 
         Diffuser light angle type employed;
     (4) "a" can be any two letters for lamp colors;
     (5) "b" can be "10SP", "20SP" or blank for Surge-Protective Device provided or not;
     (6) "c" can be "M", or "P" for DC Motion Sensor or DC PIR Sensor provided or blank for 
         not provided;
     (7) "d" can be any digits for CCT;
     (8) "e" can be "W" for Power Tunable Module provided or blank for not provided;
     (9) "g" can be "D" for CCT tunable or "S" for CCT untunable.

HB15 Series
  AST-HB15-100WZXYA1-abcde[10]
  AST-HB15-100WZXYC1-abcde[10]
  AST-HB15-100WZXYH1-abcde[10]
  AST-HB15-150WZXYA1-abcde[10]
  AST-HB15-150WZXYC1-abcde[10]
  AST-HB15-150WZXYH1-abcde[10]
  AST-HB15-200WZXYA1-abcde[10]
  AST-HB15-200WZXYC1-abcde[10]
  AST-HB15-200WZXYH1-abcde[10]
  AST-HB15-240WZXYA1-abcde[10]
  AST-HB15-240WZXYC1-abcde[10]
  AST-HB15-240WZXYH1-abcde[10]
  
[10] (1) "Z" can be any letters and digits for manufacturer of LED driver;
     (2) "X" can be any alphanumeric digit for LED type;
     (3) "Y" can be "FP", "CP" or "T1CP" for Diffuser type (e.g. FP - frost plastic, CP - 
         flat clear plastic, T1CP - flat clear with T1 angle) or "T1" to "T9" for different 
         Diffuser light angle type employed;
     (4) "a" can be any two letters for lamp colors;
     (5) "b" can be "10SP", "20SP", "S" or blank for Surge-Protective Device provided or 
         not;
     (6) "c" can be "M","M1", "M2", "P" or blank for Motion Sensor, PIR sensor provided or 
         not;
     (7) "d" can be any digits for CCT;
     (8) "e" can be "RP" or "RA" for Shade type provided or blank for not provided.

HB17 Series
  AST-HB17-100WZXYA1-abcdefg[09]
  AST-HB17-100WZXYC1-abcdefg[09]
  AST-HB17-100WZXYH1-abcdefg[09]
  AST-HB17-150WZXYA1-abcdefg[09]
  AST-HB17-150WZXYC1-abcdefg[09]
  AST-HB17-150WZXYH1-abcdefg[09]
  AST-HB17-200WZXYA1-abcdefg[09]
  AST-HB17-200WZXYC1-abcdefg[09]
  AST-HB17-200WZXYH1-abcdefg[09]
  AST-HB17-240WZXYA1-abcdefg[09]
  AST-HB17-240WZXYC1-abcdefg[09]
  AST-HB17-240WZXYH1-abcdefg[09]
  
[09] (1) "Z" can be any letters and digits for manufacturer of LED driver;
     (2) "X" can be any alphanumeric digit for manufacturer of LED;
     (3) "Y" can be "FP", "CP" or "T1CP" for Diffuser type (e.g. FP - frost plastic, CP - 
         flat clear plastic, T1CP - flat clear with T1 angle) or "T1" to "T9" for different 
         Diffuser light angle type employed;
     (4) "a" can be any two letters for lamp colors;
     (5) "b" can be "10SP", "20SP" or blank for Surge-Protective Device provided or not;
     (6) "c" can be "M","P" or blank for DC Motion Sensor, DC PIR sensor provided or not;
     (7) "d" can be any digits for CCT;
     (8) "e" can be "RP", "RA" or blank for Shade provided or not;
     (9) "f" can be "W" or blank for Power Tunable Module provided or not;
     (10) "g" can be "D" for CCT tunable or "S" for CCT untunable.

HB18 Series
  AST-HB18-100WZXYA1-abcde[10]
  AST-HB18-100WZXYA1-abcdefg[12]
  AST-HB18-100WZXYC1-abcde[10]
  AST-HB18-100WZXYC1-abcdefg[12]
  AST-HB18-100WZXYH1-abcde[10]
  AST-HB18-100WZXYH1-abcdefg[12]
  AST-HB18-150WZXYA1-abcde[10]
  AST-HB18-150WZXYA1-abcdefg[12]
  AST-HB18-150WZXYC1-abcde[10]
  AST-HB18-150WZXYC1-abcdefg[12]
  AST-HB18-150WZXYH1-abcde[10]
  AST-HB18-150WZXYH1-abcdefg[12]
  AST-HB18-200WZXYA1-abcde[10]
  AST-HB18-200WZXYA1-abcdefg[12]
  AST-HB18-200WZXYC1-abcde[10]
  AST-HB18-200WZXYC1-abcdefg[12]
  AST-HB18-200WZXYH1-abcde[10]
  AST-HB18-200WZXYH1-abcdefg[12]
  AST-HB18-240WZXYA1-abcde[10]
  AST-HB18-240WZXYA1-abcdefg[12]
  AST-HB18-240WZXYC1-abcde[10]
  AST-HB18-240WZXYC1-abcdefg[12]
  AST-HB18-240WZXYH1-abcde[10]
  AST-HB18-240WZXYH1-abcdefg[12]
  AST-HB18-300WZXYA1-abcde[10]
  AST-HB18-300WZXYA1-abcdefg[12]
  AST-HB18-300WZXYC1-abcde[10]
  AST-HB18-300WZXYC1-abcdefg[12]
  AST-HB18-300WZXYH1-abcde[10]
  AST-HB18-300WZXYH1-abcdefg[12]
  
[10] (1) "Z" can be any letters and digits for manufacturer of LED driver;
     (2) "X" can be any alphanumeric digit for LED type;
     (3) "Y" can be "FP", "CP" or "T1CP" for Diffuser type (e.g. FP - frost plastic, CP - 
         flat clear plastic, T1CP - flat clear with T1 angle) or "T1" to "T9" for different 
         Diffuser light angle type employed;
     (4) "a" can be any two letters for lamp colors;
     (5) "b" can be "10SP", "20SP", "S" or blank for Surge-Protective Device provided or 
         not;
     (6) "c" can be "M","M1", "M2", "P" or blank for Motion Sensor, PIR sensor provided or 
         not;
     (7) "d" can be any digits for CCT;
     (8) "e" can be "RP" or "RA" for Shade type provided or blank for not provided.
[12] (1) "Z" can be any letters and digits for manufacturer of LED driver
     (2) "X" can be any alphanumeric digit for LED type
     (3)  "Y" can be "FP", "CP" or "T1CP" for Diffuser type (e.g. FP - frost plastic, CP -
     flat clear plastic, T1CP - flat clear with T1 angle) or "T1" to "T9" for different
     Diffuser light angle type employed
     (4) "a" can be any two letters for lamp colors
     (5) "b" can be "10SP", "20SP" or blank for Surge-Protective Device provided or not
     (6) "c" can be "M", "P" or blank for DC Motion Sensor, DC PIR sensor provided or not
     (7) "d" can be any digits for CCT
     (8) "e" can be "RP" or "RA" for Shade type provided or blank for not provided
     (9)"f" can be "W" for Power Tunable Module provided or blank for not provided
     (10)"g" can be "D" for CCT tunable or "S" for CCT untu

HB18B Series[13]
  AST-HB18B-100WZXYA1-abcdefg
  AST-HB18B-100WZXYC1-abcdefg
  AST-HB18B-100WZXYH1-abcdefg
  AST-HB18B-150WZXYA1-abcdefg
  AST-HB18B-150WZXYC1-abcdefg
  AST-HB18B-150WZXYH1-abcdefg
  AST-HB18B-200WZXYA1-abcdefg
  AST-HB18B-200WZXYC1-abcdefg
  AST-HB18B-200WZXYH1-abcdefg
  AST-HB18B-240WZXYA1-abcdefg
  AST-HB18B-240WZXYC1-abcdefg
  AST-HB18B-240WZXYH1-abcdefg
  
[13] (1) "Z" can be any letter and digit for LED Driver;
     (2) "X" can be any alphanumeric digit for manufacturer and type of LED;
     (3) "Y" can be "FP", "CP" or "T1CP" for Diffuser type (e.g. FP - frost plastic, 
         CP - flat clear plastic, T1CP - flat clear with T1 angle) or "T1" to "T9" for 
         different Diffuser light angle type employed;
     (4) "a" can be any two letters for lamp colors;
     (5) "b" can be "10SP", "20SP" or blank for Surge-Protective Device provided or not; 
     (6) "c" can be "M", "P" or blank for DC Motion Sensor, DC PIR sensor provided or not;
     (7) "d" can be any digits for CCT;
     (8) "e" can be "RP", "RA" or blank for thermoplastic shade, aluminum shade provided or 
         not;
     (9) "f" can be "W" for Power Tunable Module provided or blank for not provided;
     (10)"g" can be "D" for CCT tunable or "S" for CCT untunable.
     (11)"h" can be “EM” or blank for Emergency Driver provided or not.

HB19 Series
  AST-HB19-100WZXYA1-abcde[10]
  AST-HB19-100WZXYC1-abcde[10]
  AST-HB19-100WZXYH1-abcde[10]
  AST-HB19-150WZXYA1-abcde[10]
  AST-HB19-150WZXYC1-abcde[10]
  AST-HB19-150WZXYH1-abcde[10]
  AST-HB19-200WZXYA1-abcde[10]
  AST-HB19-200WZXYC1-abcde[10]
  AST-HB19-200WZXYH1-abcde[10]
  AST-HB19-240WZXYA1-abcde[10]
  AST-HB19-240WZXYC1-abcde[10]
  AST-HB19-240WZXYH1-abcde[10]
  AST-HB19-300WZXYA1-abcde[10]
  AST-HB19-300WZXYC1-abcde[10]
  AST-HB19-300WZXYH1-abcde[10]
  
[10] (1) "Z" can be any letters and digits for manufacturer of LED driver;
     (2) "X" can be any alphanumeric digit for LED type;
     (3) "Y" can be "FP", "CP" or "T1CP" for Diffuser type (e.g. FP - frost plastic, CP - 
         flat clear plastic, T1CP - flat clear with T1 angle) or "T1" to "T9" for different 
         Diffuser light angle type employed;
     (4) "a" can be any two letters for lamp colors;
     (5) "b" can be "10SP", "20SP", "S" or blank for Surge-Protective Device provided or 
         not;
     (6) "c" can be "M","M1", "M2", "P" or blank for Motion Sensor, PIR sensor provided or 
         not;
     (7) "d" can be any digits for CCT;
     (8) "e" can be "RP" or "RA" for Shade type provided or blank for not provided.

HB19B Series[13]
  AST-HB19B-100WZXYA1-abcdefg
  AST-HB19B-100WZXYC1-abcdefg
  AST-HB19B-100WZXYH1-abcdefg
  AST-HB19B-150WZXYA1-abcdefg
  AST-HB19B-150WZXYC1-abcdefg
  AST-HB19B-150WZXYH1-abcdefg
  AST-HB19B-200WZXYA1-abcdefg
  AST-HB19B-200WZXYC1-abcdefg
  AST-HB19B-200WZXYH1-abcdefg
  AST-HB19B-240WZXYA1-abcdefg
  AST-HB19B-240WZXYC1-abcdefg
  AST-HB19B-240WZXYH1-abcdefg
  
[13] (1) "Z" can be any letter and digit for LED Driver;
     (2) "X" can be any alphanumeric digit for manufacturer and type of LED;
     (3) "Y" can be "FP", "CP" or "T1CP" for Diffuser type (e.g. FP - frost plastic, 
         CP - flat clear plastic, T1CP - flat clear with T1 angle) or "T1" to "T9" for 
         different Diffuser light angle type employed;
     (4) "a" can be any two letters for lamp colors;
     (5) "b" can be "10SP", "20SP" or blank for Surge-Protective Device provided or not; 
     (6) "c" can be "M", "P" or blank for DC Motion Sensor, DC PIR sensor provided or not;
     (7) "d" can be any digits for CCT;
     (8) "e" can be "RP", "RA" or blank for thermoplastic shade, aluminum shade provided or 
         not;
     (9) "f" can be "W" for Power Tunable Module provided or blank for not provided;
     (10)"g" can be "D" for CCT tunable or "S" for CCT untunable.
     (11)"h" can be “EM” or blank for Emergency Driver provided or not.

HB20 Series[14]
  AST-HB20-100WZXYA1-abcdefg
  AST-HB20-100WZXYC1-abcdefg
  AST-HB20-100WZXYH1-abcdefg
  AST-HB20-150WZXYA1-abcdefg
  AST-HB20-150WZXYC1-abcdefg
  AST-HB20-150WZXYH1-abcdefg
  AST-HB20-200WZXYA1-abcdefg
  AST-HB20-200WZXYC1-abcdefg
  AST-HB20-200WZXYH1-abcdefg
  AST-HB20-240WZXYA1-abcdefg
  AST-HB20-240WZXYC1-abcdefg
  AST-HB20-240WZXYH1-abcdefg
  
[14] (1) "Z" can be any letters and digits for manufacturer of LED driver;
     (2) "X" can be any alphabet and/or digit for manufacturer of LED,
     (3) "Y" can be any alphanumeric characters for Diffuser type (e.g. FP - flat frost
     plastic, CP - flat clear plastic or "S1" to "S9" for different Diffuser light angle type
     employed), 
     (4) "a" can be any two letters for lamp colors,
     (5) "b" can be "10SP", "20SP" or blank for Surge-Protective Device provided or not.
     (6) "c" can be "M", "P" or blank for Motion Sensor, PIR Sensor provided or not,
     (7) "d" can be any digits for CCT.
     (8) "e" can be "RP", "RA" or blank for Shade provided or not, 
     (9) "f" can be "W" or blank for Power Tunable Module provided or not, 
     (10) "g" can be "D" for CCT tunable or "S" for CCT untunable.

HB23 Series[15]
  AST-HB23-100WZXYA1-abcdefg
  AST-HB23-100WZXYC1-abcdefg
  AST-HB23-100WZXYH1-abcdefg
  AST-HB23-150WZXYA1-abcdefg
  AST-HB23-150WZXYC1-abcdefg
  AST-HB23-150WZXYH1-abcdefg
  AST-HB23-200WZXYA1-abcdefg
  AST-HB23-200WZXYC1-abcdefg
  AST-HB23-200WZXYH1-abcdefg
  AST-HB23-240WZXYA1-abcdefg
  AST-HB23-240WZXYC1-abcdefg
  AST-HB23-240WZXYH1-abcdefg
  AST-HB23-300WZXYA1-abcdefg
  AST-HB23-300WZXYC1-abcdefg
  AST-HB23-300WZXYH1-abcdefg
  
[15] (1) "Z" can be any letters and digits for manufacturer of LED driver;
     (2) "X" can be any letter and/or digit for manufacturer and type of LED,
     (3) "Y" can be "T1" to "T9" for different Diffuser light angle type employed, 
     (4) "a" can be any two letters for lamp colors,
     (5) "b" can be "S", "EM" or blank for Surge-Protective Device, Emergency Driver provided
     or not
     (6) "c" can be "M", "P" or blank for DC Motion Sensor, DC PIR sensor provided or not,
     (7) "d" can be any digits for CCT,
     (8) "e" can be "W" or blank for Power Tunable Module provided or not,
     (9) "f" can be "D" for CCT tunable or "S" for CCT untunable,
     (10) "g" can be "RP", "RA" or blank for thermoplastic shade, aluminum shade or no shade
     provided.

HB25 series
  AST-HB25-100WZXYA1-abcdefg[27]
  AST-HB25-100WZXYA2-abcdefg[27]
  AST-HB25-100WZXYC1-abcdefg[27]
  AST-HB25-100WZXYH1-abcdefg[27]
  AST-HB25-120WZXYA1-abcdefg[27]
  AST-HB25-150WZXYA1-abcdefg[27]
  AST-HB25-150WZXYA2-abcdefg[27]
  AST-HB25-150WZXYC1-abcdefg[27]
  AST-HB25-150WZXYH1-abcdefg[27]
  AST-HB25-200WZXYA1-abcdefg[27]
  AST-HB25-200WZXYA2-abcdefg[27]
  AST-HB25-200WZXYC1-abcdefg[27]
  AST-HB25-200WZXYH1-abcdefg[27]
  AST-HB25-240WZXYA1-abcdefg[27]
  AST-HB25-240WZXYA2-abcdefg[27]
  AST-HB25-240WZXYC1-abcdefg[27]
  AST-HB25-240WZXYH1-abcdefg[27]
  AST-HB25-300WZXYA1-abcdefg[27]
  AST-HB25-300WZXYA2-abcdefg[27]
  AST-HB25-300WZXYC1-abcdefg[27]
  AST-HB25-300WZXYH1-abcdefg[27]
  AST-HB25-60WZXYA1-abcdefg[27]
  
[27] (1)"Z" can be any letters and digits for manufacturer of LED driver;
     (2)“X” can be any letter and/or digit for manufacturer and type of LED;
     (3)“Y” can be “T1” to “T9” for different Diffuser light angle type employed;
     (4)“a” can be any two letters for lamp colors;
     (5)“b” can be “S”, “EM” or blank for Surge-Protective Device, Emergency Driver provided
     or not;
     (6)“c” can be “M”, “P” or blank for DC Motion Sensor, DC PIR sensor provided or not;
     (7)“d” can be any digits for CCT;
     (8)“e” can be “W” or blank for Power Tunable Module provided or not;
     (9)“f” can be “D” for CCT tunable or “S” for CCT untunable;
     (10)“g” can be “RP”, “RA” or blank for thermoplastic shade, aluminum shade or no shade
     provided.

HB28 series
  AST-HB28-120WZXYA1-abcdefg[28]
  AST-HB28-120WZXYC1-abcdefg[28]
  AST-HB28-120WZXYH1-abcdefg[28]
  AST-HB28-150WZXYA1-abcdefg[28]
  AST-HB28-150WZXYC1-abcdefg[28]
  AST-HB28-150WZXYH1-abcdefg[28]
  AST-HB28-200WZXYA1-abcdefg[28]
  AST-HB28-200WZXYC1-abcdefg[28]
  AST-HB28-200WZXYH1-abcdefg[28]
  AST-HB28-240WZXYA1-abcdefg[28]
  AST-HB28-240WZXYC1-abcdefg[28]
  AST-HB28-240WZXYH1-abcdefg[28]
  
[28] (1) "Z" can be any letters and digits for manufacturer of LED driver;
     (2) “X” can be any letter and/or digit for manufacturer and type of LED;
     (3) “Y” can be “T1” to “T9” for different Diffuser light angle type employed;
     (4) “a” can be any two letters for lamp colors;
     (5) “b” can be “S”, “EM” or blank for Surge-Protective Device, Emergency Driver provided
     or not;
     (6) “c” can be “M”, “P” or blank for DC Motion Sensor, DC PIR sensor provided or not;
     (7) “d” can be any digits for CCT;
     (8) “e” can be “W” or blank for Power Tunable Module provided or not;
     (9) “f” can be “D” for CCT tunable or “S” for CCT untunable;
     (10) “g” can be “RP”, “RA” or blank for thermoplastic shade, aluminum shade or no shade
     provided

HBE06B series
  AST-HBE06B-150WZXYC1-abcde[26]
  AST-HBE06B-240WZXYC1-abcde[26]
  
[26] (1)"Z" can be any letters and digits for manufacturer of LED driver;
     (2)"X” can be any alphanumeric digit for manufacturer and type of LED;
     (3)“Y” can be “FP”, “CP” or “T1CP” for Diffuser type (e.g. FP= frost plastic, CP=flat
     clear plastic, T1CP=flat clear with T1 angle) or “T1” to “T9” for different Diffuser
     light angle type employed;
     (4)“a” can be any two letters for lamp colors;
     (5)“b” can be “10SP”, “20SP” for Surge-Protective Device provided, or “EM” for Emergency
     Driver provided, or blank for no Surge-Protective Device and Emergency Driver provided;
     (6)“c” can be “M”, “P” or blank for DC Motion Sensor, DC PIR sensor provided or not;
     (7)“d” can be any digits for CCT;
     (8)“e” can be “RP”, “RA” or blank for thermoplastic shade, aluminum shade provided or
     not.

HBE08 series[29] [30]
  AST-HBE08-120WZXYC1-abcdef
  AST-HBE08-120WZXYH1-abcdef
  AST-HBE08-200WZXYC1-abcdef
  AST-HBE08-200WZXYH1-abcdef
  AST-HBE08-240WZXYC1-abcef
  AST-HBE08-240WZXYH1-abcef
  AST-HBE08-330WZXYC1-abcef
  AST-HBE08-330WZXYH1-abcef
  
[29] (1)"Z" can be any letters and digits for manufacturer of LED driver;
     (2)"X" can be any alphabet and/or digit for manufacturer of LED,
     (3)"Y" can be any alphanumeric characters for Diffuser type (e.g. FP=flat frost plastic,
     CP=flat clear plastic or "T1" to "T9" for different Diffuser light angle type employed),
     
     (4)"a" can be any two letters for Lamp colors,
     (5)"b" can be can be "M", "P" or blank for Motion Sensor, PIR Sensor provided or not,
     (6)"c" can be any digits for CCT,
     (7)"d" can be "RP" or blank for Shade provided or not, 
     (8)"e" can be "W" for Power Tunable Module provided,
     (9)"f" can be "D" for CCT tunable.
[30] The product may contain the following parts, PSB is Wire box , NLTAIR2 sensor or
     TLS/Voyage sensor is a PIR sensor, PC Reflector is PC Shade, SMB is mounting bracket,
     Cordsets is PG headers on the Wire box.

HBE19B Series[13]
  AST-HBE19B-100WZXYA1-abcdeh
  AST-HBE19B-100WZXYC1-abcdeh
  AST-HBE19B-100WZXYH1-abcde
  AST-HBE19B-150WZXYA1-abcdeh
  AST-HBE19B-150WZXYC1-abcdeh
  AST-HBE19B-150WZXYH1-abcde
  AST-HBE19B-200WZXYA1-abcdeh
  AST-HBE19B-200WZXYA2-abcdeh
  AST-HBE19B-200WZXYC1-abcdeh
  AST-HBE19B-200WZXYC2-abcdeh
  AST-HBE19B-200WZXYH1-abcde
  AST-HBE19B-200WZXYH2-abcde
  AST-HBE19B-240WZXYA1-abcdeh
  AST-HBE19B-240WZXYC1-abcdeh
  AST-HBE19B-240WZXYH1-abcdeh
  
[13] (1) "Z" can be any letter and digit for LED Driver;
     (2) "X" can be any alphanumeric digit for manufacturer and type of LED;
     (3) "Y" can be "FP", "CP" or "T1CP" for Diffuser type (e.g. FP - frost plastic, 
         CP - flat clear plastic, T1CP - flat clear with T1 angle) or "T1" to "T9" for 
         different Diffuser light angle type employed;
     (4) "a" can be any two letters for lamp colors;
     (5) "b" can be "10SP", "20SP" or blank for Surge-Protective Device provided or not; 
     (6) "c" can be "M", "P" or blank for DC Motion Sensor, DC PIR sensor provided or not;
     (7) "d" can be any digits for CCT;
     (8) "e" can be "RP", "RA" or blank for thermoplastic shade, aluminum shade provided or 
         not;
     (9) "f" can be "W" for Power Tunable Module provided or blank for not provided;
     (10)"g" can be "D" for CCT tunable or "S" for CCT untunable.
     (11)"h" can be “EM” or blank for Emergency Driver provided or not.

UHB05 Series
  AST-HB05-100WSXYZD2-aaK[16]
  AST-HB05-100WSXYZH1-aaK[16]
  AST-HB05-100WSXYZH2-aaK[16]
  AST-HB05-150WSXYZD2-aaK[16]
  AST-HB05-150WSXYZH1-aaK[16]
  AST-HB05-150WSXYZH2-aaK[16]
  AST-HB05-200WSXYZD2-aaK[16]
  AST-HB05-200WSXYZH2-aaK[16]
  AST-HB05-240WSXYZD2-aaK[16]
  AST-HB05-240WSXYZH2-aaK[16]
  
[16] (1) "X" stands for LED manufactory, could be any alphabet;
     (2) "Y" stands for Diffuser type, can be "T1" to "T9", represents different
         plastic Diffuser light angle type employed, "CP","FP" represents flat clear 
         or frost plastic. "CG","FG" represents flat clear or frost glass.
     (3) "Z" stands for lamp reflector, may be blank, represents no reflector, or
         "S1"to "S9"represents different reflector light angle type employed;
     (4) "aa" represents CCT, can be any numbers.

UHB05B Series
  AST-HB05B-100WS1XYD1-abcdM1[17]
  AST-HB05B-100WS2XYD1-abcdM1[17]
  AST-HB05B-100WS3XYD1-abcdM2[17]
  AST-HB05B-120/XXX/YYYWS1XYD1-abcWef[18]
  AST-HB05B-120WS1XYD2-abcef[19]
  AST-HB05B-120WS2XYD2-abcWef[19]
  AST-HB05B-150/XXX/YYYWS1XYD1-abcWe[18]
  AST-HB05B-150/XXX/YYYWS2XYD1-abcWe[18]
  AST-HB05B-150WS1XYD1-abcdM1[17]
  AST-HB05B-150WS1XYD2-abce[19]
  AST-HB05B-150WS2XYD1-abcdM1[17]
  AST-HB05B-150WS2XYD2-abcWe[19]
  AST-HB05B-150WS3XYD1-abcdM2[17]
  AST-HB05B-200/XXX/YYYWS1XYD1-abcWef[18]
  AST-HB05B-200/XXX/YYYWS1XYD1-abcWef[18]
  AST-HB05B-200/XXX/YYYWS2XYD1-abcWef[18]
  AST-HB05B-200WS1XYD1-abcdM1
  AST-HB05B-200WS1XYD1-abcdM1[17]
  AST-HB05B-200WS1XYD2-abcef[19]
  AST-HB05B-200WS1XYD2-abcef[19]
  AST-HB05B-200WS2XYD1-abcdM1
  AST-HB05B-200WS2XYD1-abcdM1[17]
  AST-HB05B-200WS2XYD2-abcWef[19]
  AST-HB05B-200WS2XYD2-abcWef[19]
  AST-HB05B-200WS3XYD1-abcdM2[17]
  AST-HB05B-200WS3XYD1-abcdM2
  AST-HB05B-240/XXX/YYYWS1XYD1-abcWe[18]
  AST-HB05B-240/XXX/YYYWS2XYD1-abcWe[18]
  AST-HB05B-240WS1XYD1-abcdM1[17]
  AST-HB05B-240WS1XYD1-abcdM1
  AST-HB05B-240WS1XYD2-abce[19]
  AST-HB05B-240WS1XYD2-abce[19]
  AST-HB05B-240WS2XYD1-abcdM1[17]
  AST-HB05B-240WS2XYD2-abce[19]
  AST-HB05B-240WS3XYD1-abcdM2[17]
  AST-HB05B-240WSXYD1-abcd[17]
  AST‐HB05B‐100WL1XYZA1‐abcde[20]
  AST‐HB05B‐120WL1XYZA1‐abcde[20]
  AST‐HB05B‐120WS1XYD1‐abcef[19]
  AST‐HB05B‐120WS2XYD1‐abcWef[19]
  AST‐HB05B‐150WL1XYZA1‐abcde[20]
  AST‐HB05B‐150WS1XYD1‐abce[19]
  AST‐HB05B‐150WS2XYD1‐abcWe[19]
  AST‐HB05B‐150WS2XYD3‐abcde[20]
  AST‐HB05B‐200WL1XYZA1‐abcde[20]
  AST‐HB05B‐200WS1XYD1‐abcef[19]
  AST‐HB05B‐200WS2XYD1‐abcWef[19]
  AST‐HB05B‐240WL1XYZA1‐abcde[20]
  AST‐HB05B‐240WS1XYD1‐abce[19]
  AST‐HB05B‐240WS2XYD1‐abce[19]
  
[17] (1) "XXX" can be any digits less or equal to input wattage, /XXX can be blank;
     (2) "YYY" can be any digits less or equal to input wattage, /YYY can be blank;    
     (3) "X" can be any alphanumeric digit to represent manufacturer of LED; 
     (4) "Y" can be "T1" to "T9", represents different plastic Diffuser light angle type 
          employed or "CP", "FP" represents flat clear or frost plastic or "CG", "FG" 
          represents flat clear or frost glass
     (5) "a" can be any two letters to represent lamp colors; 
     (6) "b" can be "S" or blank for Surge-Protective Device provided or not;
     (7) "c" can be "M", "P" or blank for Motion Sensor, PIR sensor provided or not;
     (8) "d" can be any two digits to represent CCT.
[18] (1) "XXX" can be any digits less or equal to input wattage.
     (2) "YYY" can be any digits less or equal to input wattage.
     (3) "X" can be any alphanumeric digit for manufacturer of LED.
     (4) "Y" can be any letters and digits for Diffuser type (e.g.
         “CG” or “FG” for flat clear or frost glass, “T1” to “T9” for
         light distribution classification of plastic lens).
     (5) "a" can be any two letters for lamp colors.
     (6) "b" can be “S” or blank for Surge-Protective Device provided
         or not.
     (7) "c" can be “M”, “P”, or blank for Motion Sensor provided, PIR
         sensor provided or not.
     (8) "e" can be any digits for CCT.
     (9) "f" can be “R” or blank for LED module type.
[19] (1) "X" can be any alphanumeric digit for manufacturer of LED.
     (2) "Y" can be any letters and digits for Diffuser type (e.g. 
         “CG” or “FG” for flat clear or frost glass, “T1” to “T9” 
         for light distribution classification of plastic lens).
     (3) "a" can be any two letters for lamp colors.
     (4) "b" can be "S" or blank for Surge-Protective Device 
         provided or not.
     (5) "c" can be "M", "P" or blank for Motion Sensor provided,
         PIR sensor provided or not.
     (6) "e" can be any digits for CCT.
     (7) "f" can be "R" or blank for LED module type.
[20] (1)"X" can be any alphanumeric digit for manufacturer of LED;
     (2) "Y" can be any letters for Diffuser types (e.g. "T1" to "T9" for different plastic 
         Diffuser light angle type, "CP" for flat clear, "FP" for frost plastic or "T1CP" 
         for flat clear with T1 angle);
     (3) "Z" can be "D" or "S" for CCT Switch Assembly provided or not;
     (4) "a" can be any two letters for lamp colors;
     (5) "b" can be "S" or blank for Surge-Protective Device provided or not;
     (6) "c" can be "M", "P", "Z", "ZM", "ZP" or blank for Sensor type or no sensor 
         provided;
     (7) "d" can be any digits for CCT;
     (8) "e" can "W" or blank for Dimming Assembly provided or not.

UHB07 Series
  AST-HB07-100WRXYD1-abcd[17]
  AST-HB07-100WS2XYD1-accdM1[17]
  AST-HB07-100WSXYD1-abcd-1[17]
  AST-HB07-150WRXYD1-abcd[17]
  AST-HB07-150WS2XYD1-accdM1[17]
  AST-HB07-150WSXYD1-abcd-1[17]
  AST-HB07-200WRXYD1-abcd[17]
  AST-HB07-200WS2XYD1-accdM1[17]
  AST-HB07-200WSXYD1-abcd-1[17]
  AST-HB07-240WRXYD1-abcd[17]
  AST-HB07-240WS2XYD1-accdM1[17]
  AST-HB07-240WSXYD1-abcd-1[17]
  AST-HB08-100WSXYD1-abcd[17]
  AST-HB08-150WSXYD1-abcd[17]
  AST-HB08-200WSXYD1-abcd[17]
  AST-HB08-240WSXYD1-abcd[17]
  AST‐HB07‐100WLXYD1‐abcd[17]
  AST‐HB07‐150WLXYD1‐abcd[17]
  AST‐HB07‐200WLXYD1‐abcd[17]
  AST‐HB07‐240WLXYD1‐abcd[17]
  SNC-HB07-100WSXYH1-abcd-1[17]
  SNC-HB07-150WSXYH1-abcd-1[17]
  SNC-HB07-200WSXYH1-abcd-1[17]
  SNC-HB07-240WSXYH1-abcd-1[17]
  
[17] (1) "XXX" can be any digits less or equal to input wattage, /XXX can be blank;
     (2) "YYY" can be any digits less or equal to input wattage, /YYY can be blank;    
     (3) "X" can be any alphanumeric digit to represent manufacturer of LED; 
     (4) "Y" can be "T1" to "T9", represents different plastic Diffuser light angle type 
          employed or "CP", "FP" represents flat clear or frost plastic or "CG", "FG" 
          represents flat clear or frost glass
     (5) "a" can be any two letters to represent lamp colors; 
     (6) "b" can be "S" or blank for Surge-Protective Device provided or not;
     (7) "c" can be "M", "P" or blank for Motion Sensor, PIR sensor provided or not;
     (8) "d" can be any two digits to represent CCT.

UHB08 Series[17]
  AST-HB08-100/XXX/YYYWSXYD3-abcdW
  AST-HB08-100/XXX/YYYWSXYH1-abcdW
  AST-HB08-100WS2XYD1-abcdM2
  AST-HB08-100WS3XYD1-abcdM3
  AST-HB08-100WSXYD3-abcd
  AST-HB08-100WSXYH1-abcd
  AST-HB08-150/XXX/YYYWSXYD3-abcdW
  AST-HB08-150/XXX/YYYWSXYH1-abcdW
  AST-HB08-150WS2XYD1-abcdM2
  AST-HB08-150WS3XYD1-abcdM3
  AST-HB08-150WSXYD3-abcd
  AST-HB08-150WSXYH1-abcd
  AST-HB08-200/XXX/YYYWSXYD3-abcdW
  AST-HB08-200/XXX/YYYWSXYH1-abcdW
  AST-HB08-200WS2XYD1-abcdM2
  AST-HB08-200WS3XYD1-abcdM3
  AST-HB08-200WSXYD3-abcd
  AST-HB08-200WSXYH1-abcd
  AST-HB08-240/XXX/YYYWSXYD3-abcdW
  AST-HB08-240/XXX/YYYWSXYH1-abcdW
  AST-HB08-240WS2XYD1-abcdM2
  AST-HB08-240WS3XYD1-abcdM3
  AST-HB08-240WSXYD3-abcd
  AST-HB08-240WSXYH1-abcd
  AST‐HB08‐100WL1XYA1‐abcde
  AST‐HB08‐100WSXYD1‐abcd
  AST‐HB08‐150WL1XYA1‐abcde
  AST‐HB08‐150WSXYD1‐abcd
  AST‐HB08‐200WL1XYA1‐abcde
  AST‐HB08‐200WSXYD1‐abcd
  AST‐HB08‐240WL1XYA1‐abcde
  AST‐HB08‐240WSXYD1‐abcd
  
[17] (1) "XXX" can be any digits less or equal to input wattage, /XXX can be blank;
     (2) "YYY" can be any digits less or equal to input wattage, /YYY can be blank;    
     (3) "X" can be any alphanumeric digit to represent manufacturer of LED; 
     (4) "Y" can be "T1" to "T9", represents different plastic Diffuser light angle type 
          employed or "CP", "FP" represents flat clear or frost plastic or "CG", "FG" 
          represents flat clear or frost glass
     (5) "a" can be any two letters to represent lamp colors; 
     (6) "b" can be "S" or blank for Surge-Protective Device provided or not;
     (7) "c" can be "M", "P" or blank for Motion Sensor, PIR sensor provided or not;
     (8) "d" can be any two digits to represent CCT.

UHB10B Series[21]
  AST-HB10B-130WZXYA1-abcdefg
  AST-HB10B-130WZXYC1-abcdefg
  AST-HB10B-130WZXYH1-abcdefg
  AST-HB10B-150WZXYA1-abcdefg
  AST-HB10B-150WZXYC1-abcdefg
  AST-HB10B-150WZXYH1-abcdefg
  AST-HB10B-180WZXYA1-abcdefg
  AST-HB10B-180WZXYC1-abcdefg
  AST-HB10B-180WZXYH1-abcdefg
  AST-HB10B-200WZXYA1-abcdefg
  AST-HB10B-200WZXYC1-abcdefg
  AST-HB10B-200WZXYH1-abcdefg
  AST-HB10B-210WZXYA1-abcdefg
  AST-HB10B-210WZXYC1-abcdefg
  AST-HB10B-210WZXYH1-abcdefg
  AST-HB10B-240WZXYA1-abcdefg
  AST-HB10B-240WZXYC1-abcdefg
  AST-HB10B-240WZXYH1-abcdefg
  
[21] (1) "Z" can be any letter and digit for manufacturer of LED driver;
     (2) Where "X" can be any alphanumeric digit for manufacturer of LED; 
     (3) "Y" can be any alphanumeric characters for Diffuser type (e.g. FP - flat frost
     plastic, CP - flat clear plastic or "S1" to "S9" for different Diffuser light angle type
     employed);
     (4) "a" can be any two letters for lamp colors;
     (5) "b" can be "10SP", "20SP" or blank for Surge-Protective Device provided or not; 
     (6) "c" can be "M", "P" or blank for Motion Sensor, PIR sensor provided or not; 
     (7) "d" can be any digits for CCT; 
     (8) "e" can be "RP", "RA" or blank for Shade provided or not; 
     (9) "f" can be "W" or blank for Power Tunable Module provided or not; 
     (10) "g" can be "D" for CCT tunable or "S" for CCT untunable.

UHB11 Series
  AST-HB11-100WH1XYA1-abcd[22]
  AST-HB11-100WS1XYA1-abcd[22]
  AST-HB11-100WS1XYC1-abcd[22]
  AST-HB11-100WS1XYH1-abcd[22]
  AST-HB11-100WZXYC2-abcde[23]
  AST-HB11-150WH1XYA1-abcd[22]
  AST-HB11-150WS1XYA1-abcd[22]
  AST-HB11-150WS1XYC1-abcd[22]
  AST-HB11-150WS1XYH1-abcd[22]
  AST-HB11-200WH1XYA1-abcd[22]
  AST-HB11-200WS1XYA1-abcd[22]
  AST-HB11-200WS1XYC1-abcd[22]
  AST-HB11-200WS1XYH1-abcd[22]
  AST-HB11-240WH1XYA1-abcd[22]
  AST-HB11-240WS1XYA1-abcd[22]
  AST-HB11-240WS1XYC1-abcd[22]
  AST-HB11-240WS1XYH1-abcd[22]
  AST‐HB11‐100/XXX/YYYWZXYA1‐abcdeW[24]
  AST‐HB11‐100/XXX/YYYWZXYH1‐abcdeW[24]
  AST‐HB11‐100WZXYA1‐abcdef[23]
  AST‐HB11‐100WZXYC1‐abcde[23]
  AST‐HB11‐150/XXX/YYYWZXYA1‐abcdeW[24]
  AST‐HB11‐150/XXX/YYYWZXYH1‐abcdeW[24]
  AST‐HB11‐150WZXYA1‐abcdef[23]
  AST‐HB11‐150WZXYC1‐abcde[23]
  AST‐HB11‐200/XXX/YYYWZXYA1‐abcdeW[24]
  AST‐HB11‐200/XXX/YYYWZXYH1‐abcdeW[24]
  AST‐HB11‐200WZXYA1‐abcdef[23]
  AST‐HB11‐200WZXYC1‐abcde[23]
  AST‐HB11‐240/XXX/YYYWZXYA1‐abcdeW[24]
  AST‐HB11‐240/XXX/YYYWZXYH1‐abcdeW[24]
  AST‐HB11‐240WZXYA1‐abcdef[23]
  AST‐HB11‐240WZXYC1‐abcde[23]
  AST‐HB11‐300WZXYA1‐abcd[24]
  AST‐HB11‐300WZXYC1‐abcde[23]
  AST‐HB11‐300WZXYH1‐abcd[24]
  AST‐HB11‐400WZXYA1‐abcd[24]
  AST‐HB11‐400WZXYH1‐abcd[24]
  
[22] (1) "X" can be any alphanumeric digit to represent manufacturer of LED.
     (2) "Y" stands for Diffuser type and can be “FP” represents flat plastic
         or “S1” to “S9” for different Diffuser light angle type employed.
     (3) "a" can be any two letters to represent lamp colors.
     (4) "b" can be “10SP”, “20SP” or blank for Surge-Protective Device 
         provided or not.
     (5) "c" can be “M”, “P”, or blank for Motion Sensor, PIR sensor 
         provided or not.
     (6) "d" can be any digits to represent CCT.
[23] (1) "Z" can be any letters and digits for manufacturer of LED driver;
     (2) "X" can be any alphanumeric digit for LED type;
     (3) "Y" can be "FP", "CP" or "T1CP" for Diffuser type (e.g. FP - frost plastic, CP - 
         flat clear plastic, T1CP - flat clear with T1 angle) or "T1" to "T9" for different 
         Diffuser light angle type employed;
     (4) "a" can be any two letters for lamp colors;
     (5) "b" can be "10SP", "20SP", "S" or blank for Surge-Protective Device provided or 
         not;
     (6) "c" can be "M1", "M2", "P" or blank for Motion Sensor, PIR sensor provided or not;
     (7) "d" can be any digits for CCT;
     (8) "e" can be "W" or blank for Power Tunable Module provided or not;
     (9) "f" can be "RP" or "RA" for Shade type provided or blank for not provided.
[24] (1) "XXX" can be any digits less or equal to input wattage;
     (2) "YYY" can be blank or any digits less or equal to input wattage;
     (3) "Z" can be any letters and digits for manufacturer of LED driver;
     (4) "X" can be any alphanumeric digit for LED type;
     (5) "Y" can be "FP", "CP" or "T1CP" for Diffuser type (e.g. FP - frost plastic, CP - 
         flat clear plastic, T1CP - flat clear with T1 angle) or "T1" to "T9" for different 
         Diffuser light angle type employed; "a" can be any two letters for lamp colors;
     (6) "a" can be any two letters for lamp colors;
     (7) "b" can be "S" or blank for Surge-Protective Device provided or not;
     (8) "c" can be "M1", "M2", "P" or blank for Motion Sensor, PIR sensor provided or not;
     (9) "d" can be "XX/YY/ZZK" or "XX/YYK" or "XXK" for CCT Tunable Module provided or not 
         (XX/, YY/, ZZ can be any digits or blank),
     (10) "e" can be "RP", "RA" or blank for Thermoplastic shade, aluminum shade provided 
          or not.

Number of matching Manufacturers is 1
Number of matching Products is 529
Processing time was 0 seconds