NSF Product and Service Listings

These NSF Official Listings are current as of Wednesday, July 16, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/food/Listings.asp?Standard=002&Company=C0770377&

NSF/ANSI 2
Food Equipment


 
KEKE USA TRADING INC 
996 Belleville Turnpike
Kearny, NJ 07032 
United States 
86 150 1409 3242

Facility : Guangdong Province, China


Dish Table[1]
  CDT-(1)(2)-(3)(4)
  
[1] (1) represents the sink dimensions from left to right in inches Alternatively, if it
    refers to the overall length of the product, then "(1)" would indicate the total length
    of the product in inches
    (2) represents the sink dimensions from front to back, measured in inches
    (3) 1.2.3.4.can represent either the quantity of sinks  or the depths of different sinks
    (4) L indicates that the drainage board is on the left, R indicates that the drainage
    board is on the right, an empty space signifies the absence of a drainage board

Stainless Steel Dump Prewash and Soak Sinks[1]
  KSDT-(1)(2)-(3)(4)
  
[1] (1) represents the sink dimensions from left to right in inches Alternatively, if it
    refers to the overall length of the product, then "(1)" would indicate the total length
    of the product in inches
    (2) represents the sink dimensions from front to back, measured in inches
    (3) 1.2.3.4.can represent either the quantity of sinks  or the depths of different sinks
    (4) L indicates that the drainage board is on the left, R indicates that the drainage
    board is on the right, an empty space signifies the absence of a drainage board

Stainless Steel Sink[2]
  KBAR-(1)(2)-(3)(4)
  KBS-(1)(2)-(3)(4)
  KDS-(1)(2)-(3)(4)
  KHS-(1)(2)-(3)(4)
  KI-(1)(2)-(3)(4)
  KM-(1)(2)-(3)(4)
  KS-(1)(2)-(3)(4)
  
[2] (1) represents the sink dimensions from left to right in inches Alternatively, if it
    refers to the overall length of the product, then "(1)" would indicate the total length
    of the product in inches
    (2) represents the sink dimensions from front to back, measured in inches
    (3) 1.2.3.4.can represent either the quantity of sinks  or the depths of different sinks
    (4) L indicates that the drainage board is on the left, R indicates that the drainage
    board is on the right, An empty space signifies the absence of a drainage board

Stainless Steel Wall Shelf[3]
  
[3] (1) represents the length of the product in inches	
    (2) represents the width of the product in inches
    (3)Option to configure hooks or without

Stainless Steel Work Table[4]
  KDOS-(1)(2)-(3)
  KUC-(1)(2)-(3)(4)
  KW-(1)(2)-(3)(4)
  
[4] (1) represents the length of the product in inches	
    (2) represents the width of the product in inches	
    (3) B4 represents a backrest height of 4 inches.B2 represents a tilt or flip upwards of
    2 inches to the left, rear, and right sides If there is a blank space, it signifies the
    absence of a specific element or detail	
    (4) W indicates that the product is designed to be disassembled and replaced with wheels
    A blank space signifies that the product comes with standard adjustable feet

Stainless Steel Work Table with Cabinet[4]
  KDC-(1)(2)-(3)(4)
  
[4] (1) represents the length of the product in inches	
    (2) represents the width of the product in inches	
    (3) B4 represents a backrest height of 4 inches.B2 represents a tilt or flip upwards of
    2 inches to the left, rear, and right sides If there is a blank space, it signifies the
    absence of a specific element or detail	
    (4) W indicates that the product is designed to be disassembled and replaced with wheels
    A blank space signifies that the product comes with standard adjustable feet

Number of matching Manufacturers is 1
Number of matching Products is 14
Processing time was 0 seconds