NSF Product and Service Listings

These NSF Official Listings are current as of Wednesday, July 16, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/food/Listings.asp?Standard=002&Company=C0786718&

NSF/ANSI 2
Food Equipment


 
4 POINT STEEL CORP 
6728 Tribble Street
Lithona, GA 30058 
United States 
470-331-6052

Facility : Zhejiang, China


Cabinet[1]
  C-CFHL-(2)(3)
  C-CFSD-(2)(3)
  C-OFHL-(2)(3)
  C-OFSD-(2)(3)
  CB-(1)(2)(3)(4)(5)(6)(7)(8)(9)(10)
  CDC-(2)(3)
  S-DC(2)(3)
  SBC(2)(3)
  SBC-SINK-(2)(3)
  SC(2)(3)
  WC-CF-(2)(3)-H
  WC-CF-(2)(3)-S
  WC-OF-(2)(3)
  WC-ST-(2)(3)-H
  WC-ST-(2)(3)-S
  
[1] (1) Can be any one to eight letters or numbers to represent cabinet.
    (2) Top shelf width in inches from front to back
    (3) Top shelf length in inches from left to right
    (4) Material of cabinet
        3 - 304
        4 - 430
    (5) Thickness of material
        14 - 14GA
        16 - 16GA
        18 - 18GA
        20 - 20GA
        22 - 22GA
    (6) Top shelf type:
        F  - Flat
        BS – Backsplash
        B  – Backsplash
    (7) Height of backsplash
    (8) Cabinet Completion style
        K  - Knock down
        KD - Knock down
        W  - Welded
    (9) Height of cabinet
    (10) Number of shelves:
         D - Double shelves
         T - Triple shelves

Cart[2]
  BCART-(4)X(3)
  CART-(1)(2)(3)(4)(5)(6)(7)(8)
  CCM-(3)(4)
  MWS-(3)(4)
  PTD-18-55G
  SC(2)S(3)(4)SDPB
  SC(2)S(3)(4)SDPB(5)
  SSCART-(4)X(3)
  ULC(2)R(3)(4)
  ULC(3)(4)
  UMC(2)R(3)(4)
  UMC(3)(4)
  USC(3)(4)
  WELDCART-(3)(4)
  
[2] (1) Can be any one to eight letters or numbers to represent cart.
    (2) Number of shelves
        2S - 2 shelves
        3S - 3 shelves
        2  - 2 shelves
        3  - 3 shelves
        D  - Double shelves
        T  - Triple shelves
    (3) Shelf width in inches from front to back
    (4) Shelf length in inches from left to right
    (5) Cart completion style
        K    - Knock down
        W    - Welded
        KD   - Knock down
        Weld - Welded
    (6) Material of cart
        2 - 201
        3 - 304
        4 - 430
    (7) Thickness of material
        14 - 14GA
        16 - 16GA
        18 - 18GA
        20 - 20GA
        22 - 22GA
    (8) Height of cart

Cutting Board[3]
  (3)-CB-(2)(1)
  
[3] (1) Dimension of board, length, digit 1 or 2
    (2) Dimension of board, width,  digit 1 or 2
    (3) Color of board:
        W   - White
        BLU - Blue
        BK   - Black
        G   - Green
        R   - Red
        Y   - Yellow
        BRN - Brown

Dish Table[4]
  DT-(2)-(1)(3)
  DT-(2)-(1)(3)(4)(5)
  DT-(2)-U(3)
  
[4] (1) Table top type:
        C - Clean dish table without bowl
        S - Soiled dish table with bowl
    (2) Top shelf length in inches from left to right
    (3) Drain board configuration
        L - Left
        R – Right
    (4) Height of dish table
    (5) Width of dish table

Drop in Sink[5]
  (2)DS-(4)(3)
  (2)DS-(4)(3)(5)
  (2)DS-(4)(3)(5)SP
  (2)DS-(4)(3)SP
  DIHSIBF(4)(3)
  DIS-(1)C(2)(3)(4)(5)(6)(7)(8)(9)(10)
  DIS-(4)(3)
  DIS-(4)(3)(5)
  DIWSF(4)(3)
  DIWSF(4)(3)SG
  DIWSIBF(4)(3)
  DW(4)
  
[5] (1) Can be any one to eight letters or numbers to represent Drop in Sink.
    (2) Number of sink bowls
    (3) Interior dimension of sink bowl in inches from front to back
    (4) Interior dimension of sink bowl in inches from left to right
    (5) Depth of bowl
    (6) Material of drop in sink
        2 - 201
        3 - 304
        4 - 430
    (7) Thickness of material
        14 - 14GA
        16 - 16GA
        18 - 18GA
        20 - 20GA
        22 - 22GA
    (8) Width of drop in sink
    (9) Length of drop in sink
    (10) Drain board configuration
         L  - Left
         R  - Right
         LR - Left and right

Floor Mop Sink[6]
  MS-(1)(2)(3)(4)(5)(6)(7)(8)(9)
  MS-(2)(3)
  SFT-(2)(3)
  
[6] (1) Can be any one to eight letters or numbers to represent mop sink.
    (2) Width of mop sink
    (3) Length of mop sink
    (4) Height of mop sink
    (5) Material of mop sink
        2 - 201
        3 - 304
        4 - 430
    (6) Thickness of material
        14 - 14GA
        16 - 16GA
        18 - 18GA
        20 - 20GA
        22 - 22GA
    (7) Interior dimension of sink bowl in inches from left to right.
    (8) Interior dimension of sink bowl in inches from front to back.
    (9) Depth of bowl

Griller[7]
  AO(1)T-(2)(3)
  P(1)P-(2)(3)(4)
  
[7] (1) Griddle or/and broiler;
    (2) Length of unit
    (3) Width of unit
    (4) Pan steel

Hand Sink[8]
  HS-(1)-(3)(2)(4)(5)(6)(7)
  HS-(3)(2)-CFOLD-PT
  HS-(3)(2)-LSP
  HS-(3)(2)-RSP
  NHS-(3)(2)
  NHS-(3)(2)-C
  NHS-(3)(2)-F
  NHS-(3)(2)-H
  NHS-(3)(2)-K
  NPHS-(3)(2)
  NPHS-(3)(2)-C
  NPHS-(3)(2)-F
  NPHS-(3)(2)-H
  NPHS-(3)(2)-K
  RSHS-(3)(2)
  RSPHS-(3)(2)
  
[8] (1) Can be any one to eight letters or numbers to represent Hand Sink.
    (2) Width of hand sink
    (3) Hand sink length in inches from left to right
    (4) Back splash
        1.5R - 1.5" back splash
        2R   - 2" back splash
    (5) SP - Side splashes
        BR - Brackets
        PS - Pedestal base
    (6 )Depth of bowl
    (7) Height of hand sink

Hood Filter[9]
  (5)HF(1)(2)(3)(4)(6)(7)
  (5)HF-(2)(3)
  (5)HF-(2)X(3)
  CH(2)(3)(4)
  CHP(2)(3)(4)
  CKEH(2)(3)(4)
  CKEHP(2)(3)(4)
  
[9] (1) Can be any one to eight letters or numbers to represent Hood Filter.
    (2) Filter width in inches from front to back
    (3) Filter length in inches from left to right
    (4) Filter height in inches from top to bottom
    (5) Filter material:
        A - Aluminum
        S - Stainless steel
    (6) Stainless steel of Hood Filter
        2 - 201
        3 - 304
        4 - 430
    (7) Thickness of material
        14 - 14GA
        16 - 16GA
        18 - 18GA
        20 - 20GA
        22 - 22GA

Ice Bin[10]
  BB(6)(5)(7)
  BICT(8)‐(6)(5)
  BICT(8)‐(6)(5)OB
  DIIB(2)(3)
  DIIB(2)(3)-CP
  DIIB(2)(3)-CP10
  DIIB-COVER-(2)(3)
  DIICFW(8)(6)(5)
  DIWSIB(2)(3)
  IB-(1)(2)(3)(4)(5)(6)(7)
  IB-(2)(3(4) )-CP
  IB-(2)(3)
  IB-(2)(3)(4)
  IB-(2)(3)(4) -CP10
  IB-(2)(3)-CP
  IB-(2)(3)-CP10
  IB-COVER-(2)(3)
  ICT(8)CB
  ICT(8)CBSD
  ICT(8)US
  PIB(6)(5)(7)
  PTIB(6)(5)(7)-CP
  PTIB(6)(5)(7)-CP10
  
[10] (1) Can be any one to eight letters or numbers to represent Ice bin.
     (2) Width of ice bin
     (3) Length of ice bin
     (4) Depth of ice bin
     (5) Interior dimension of sink bowl in inches from left to right.
     (6) Interior dimension of sink bowl in inches from front to back.
     (7) Depth of bowl

Ingredient Bin Rack
  IBR-1111
  IBR-1811
  IBR-1836
  IBR-1848
  IBR-1860
  IBR-1872

Over Shelf[11]
  A(1)KR(2)(3)
  OS(1)-(2)(3)
  OS(1)-(2)(3)(4)
  
[11] (1) Number of shelves
         1 - Single shelf
         2 - Double shelves
         3 - Triple shelves
     (2) Shelf width in inches from front to back
     (3) Shelf length in inches from left to right
     (4) Shelf height

Pan[12]
  FP-(1)(4)
  SSP-(1)(2)(3)-(4)(5)(6)(7)
  
[12] (1) Pan type
         1/1 pan - 11
         1/2 pan - 12
         1/3 pan - 13
         1/6 pan - 16
         1/9 pan - 19
     (2) Pan width
     (3) Pan length
     (4) Pan depth
     (5) Stainless steel type, 2 means 200 series, 3 means 300 series, 4 means 400 
         series
     (6) Stainless steel thickness in gauge
     (7) Loading capacity of pan

Perforated Riser[13]
  PR-(1)(2)(3)-(4)(5)
  
[13] (1) Perforated riser width
     (2) Perforated riser length
     (3) Perforated riser depth
     (4) Stainless steel type, 2 means 200 series, 3 means 300 series, 4 means 400 
         series
     (5) Stainless steel thickness in gauge

Sheet Pan Rack[14]
  (6)PR-(2)(3)(4)-(5)(6)
  (6)PR-(5)
  (6)PR-(5)SL
  (6)PR-(5)SLW
  (6)PR-(5)W
  (6)PRN-(5)
  (6)PRN-(5)SL
  (6)PRN-(5)SLW
  (6)PRN-(5)W
  DR-(2)(3)-(4)
  DR-(2)(3)-(4)C
  KR-(2)(3)
  SPR-(5)
  
[14] (1) Can be any one to eight letters or numbers to represent Sheet Pan Rack.
     (2) Rack width in inches from front to back
     (3) Rack length in inches from left to right
     (4) Rack height in inches from top to bottom
     (5) Number of pans
     (6) Rack material:
         A - Aluminum
         S - Stainless steel

Shelf[15]
  (1)(2)(3)(4)(5)(6)(7)WS
  (2)(3)WS
  CH-(2)(3)
  CM-PR-(3)
  CM-PR-(3)G
  GR-(2)(3)
  MS-(2)(3)
  PRS-(2)(3)
  SLANT-WS-(2)(3)
  TS-(2)(3)
  TWDS(2)(3)
  TWMS(2)(3)
  WM-D-PR-(3)
  WM-D-PR-(3)G
  WM-PR-(3)
  
[15] (1) Can be any one to eight letters or numbers to represent shelf.
     (2) Width in inches
     (3) Length in inches
     (4) Height of shelf
     (5) Material of shelf
         2 - 200 series
         3 - 300 series
         4 - 400 series
     (6) Thickness of material
         14 - 14GA
         16 - 16GA
         18 - 18GA
         20 - 20GA
         22 - 22GA
     (7) Back splash
         1.5R  - 1.5" Back splash
         1.5BS - 1.5 " Back splash
         2R    - 2" rear up
         2BS   - 2" Back splash
         4R    - 4" Back splash
         4BS   - 4" Back splash

Sink[16] [17]
  (1)(3)(5)RE-LT
  (1)(3)(5)RE-RT
  (1)(3)(5)REM-LT
  (1)(3)(5)REM-RT
  (1)(3)(5)RSLT
  (1)(3)(5)RSRT
  (1)-(3)(5)
  (1)-(3)(5)(4)
  (1)-(3)(5)-3DR
  (1)-(3)(5)-BLM
  (1)-(3)(5)-CP-BLM
  (1)-(3)(5)-CP-SS
  (1)-(3)(5)-CT
  (1)-(3)(5)-DRHD
  (1)-(3)(5)-FT
  (1)-(3)(5)-HD
  (1)-(3)(5)-OF
  (1)-(3)(5)-OT
  (1)-(3)(5)-PT
  (1)-(3)(5)-SPHLD
  (1)-(3)(5)-SS
  (1)-(3)(5)-ST
  (1)-(3)(5)-STD
  (1)-(3)(5)-STDSS
  (1)-(3)(5)-WC
  (1)-(3)(5)-WCHD
  (1)-(3)(5)HD-SS
  (1)-(3)(5)L
  (1)-(3)(5)L-CP
  (1)-(3)(5)LIB-CP
  (1)-(3)(5)LIBSP-CP
  (1)-(3)(5)MD-HD
  (1)-(3)(5)MD-OF
  (1)-(3)(5)R
  (1)-(3)(5)R-CP
  (1)-(3)(5)RIB-CP
  (1)-(3)(5)RIBSP-CP
  (1)-(3)X(5)-45IC
  (1)-(3)X(5)-45OC
  (1)-(3)X(5)-90IC
  (1)-(3)X(5)-90OC
  (1)-(3)X(5)CO
  (1)-(3)X(5)COGR
  (1)-(3)X(5)GR
  (1)-(5)-(3)LD
  (1)-(5)-(3)WB
  (1)-(5)-(3)WB(3)LR
  (2)BS(5)-(4)
  (2)BS-(4)
  (2)COMP-(8)(7)(9)-(10)(4)
  (2)COMP-(8)(7)(9)-(10)(4)(11)(12)
  (2)COMP-(8)(7)-(10)(4)
  (2)COMP-(8)(7)-(4)
  FSB-(7)(8)(9)
  GRC-2R
  GRC-3R
  LQD-4-(7)(8)
  LQD-5-(7)(8)
  MSS-(8)(7)(9)-(6)
  SADB-(5)
  SB-(7)(8)
  
[16] (1) Type of sink
         UHS/UHSC/BDU/RBDU/UBDU/RPBDU/BD/PBD/DSC/GRSU/PDSC/CDS/UBPSC
         /DSBS/BSDS/BSS/UBSDB/PB/CCS/CWS/PTWS/BEVC/BDRD/SMDT/PRF/CF/
         SGH/S/CS/ST/PS/DT - Sink
     (2) Number of sink compartments
     (3) Width of sink
     (4) Drainboard configuration:
         DL  - Left
         DR  - Right
         LR  - Left and right
         2D  - Left and right
         N   - No drainboard
     (5) Length of sink
     (6) Height of sink
     (7) Interior dimension of sink bowl in inches from front to back
     (8) Interior dimension of sink bowl in inches from left to right
     (9) Depth of bowl
     (10) Dimension of drainboard
     (11) Material of sink
          2 - 200 series
          3 - 300 series
          4 - 400 series
     (12) Thickness of material
          14 - 14GA
          16 - 16GA
          18 - 18GA
          20 - 20GA
          22 - 22GA
[17]  Product may be sold with or without the drainboard.

Tray[18]
  SB-TS-(2)(3)
  
[18] (1) Can be any one to eight letters or numbers to represent tray
     (2) Tray width	
     (3) Tray length
     (4) Tray depth
     (5) Material of tray	
         Stainless steel type, 2 means 200 series, 3 means 300 series, 4 means 400 
         series
     (6) Stainless steel thickness in gauge

Work Table[19]
  (1)EQ-(2)(3)
  (1)WT-(2)(3)
  (1)WT-(2)(3)-(4)(5)(6)(7)
  (1)WT-(2)(3)-C
  (1)WT-(2)x(3)-OB
  RCS-(2)(3)
  RWS-(2)(3)
  WT-SINK-(2)(3)BL
  WT-SINK-(2)(3)BR
  
[19] (1) Type of worktable.
         E  - Economy worktable
         P  - Premium worktable
         EB - Economy worktable with backsplash
         PB - Premium worktable with backsplash
         F  - Folding worktable
     (2) Width in inches
     (3) Length in inches
     (4) Material of worktable
         2 - 201 series
         3 - 304 series
         4 - 430 series
         G - Galvanized
     (5) Thickness of material
         14 - 14GA
         16 - 16GA
         18 - 18GA
         20 - 20GA
     (6) Type of Top shelf
         2    - 2" Rear edge up
         2R   - 2" Rear edge up
         2LBR - 2" Turn up at left, back and right edge
         4BS  - 4" Backsplash
         2BS  - 2" Backsplash
         5BS  - 5" Backsplash
         6BS  - 6" Backsplash
     (7) Metal type under shelf:
         S - Stainless
         G - Galvanized

Number of matching Manufacturers is 1
Number of matching Products is 207
Processing time was 0 seconds