NSF Product and Service Listings

These NSF Official Listings are current as of Wednesday, July 16, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/food/Listings.asp?Standard=002&Company=C0832031&

NSF/ANSI 2
Food Equipment


 
VIETTA INDUSTRIES (VN) CO.,LTD DBA SPEED 
Road No. 7, Trang Bang Industrial Park, An Tinh Commune, Trang Bang District
Tay Ninh Province 
Vietnam 
86 13702590996
Visit this company's website

Facility : Tay Ninh Province Vietnam


Compartment Sink[4] [9]
  SCS-(1)(2)(3)(4)-(5)-(6)
  
[4] (1)bowl qty: Number (1B,2B, etc.) indicates bowl qty	
    (2)Number indicates bowl length in inches 	
    (3)Number indicates bowl width in inches 	
    (4)Number indicates bowl depth in inches	
    (5) indicates drainboard qty(1L/R, 2D), drainboard length in inches and configuration:
    L-left, R-right, D-double	
    (6)Stainless steel thickness in gauge:14G-20G
[9] (1) Available in Stainless steel 201/304, Galvanized in legs;
    (2) Available in plastic, Stainless steel or casters in feet.

Floor Mount Mop Sink[5]
  SM(1)(2)-(3)-(4)
  
[5] (1) Number indicates length of mop sink in inches	
    (2) Number indicates width of mop sink in inches	
    (3) Number indicates height of mop sink in inches	
    (4) Stainless steel thickness in gauge:14G-20G

Hand Sink[3]
  SHS-(1)(2)-(3)-(4)
  
[3] (1) Number indicates bowl length in inches 	
    (2) Number indicates bowl width in inches 	
    (3) With splash shield configuration: 
        XL-Left, 
        XR-Right, 
        XD-Left&right, 
        XT-Left, right,back, 
        X-splash height in inches	
    (4) Stainless steel thickness in gauge:14G-20G

Heavy Duty Stainless Steel Clean Dishtable[2] [9]
  SDT(1)-(2)-(3)(4)(5)-(6)
  
[2] (1) Table top type: 
        C-clean dish table without bowl; 
        B-dish table with bowl(if more than 1 bowl, that's 2B, 3B,etc.)	
    (2) Indicate the bowl size and configuration if there's one bowl: 
        XL(R), X refers to bowl length in inches,  L =Left, R=right	
    (3)Number indicates length in inches 	
    (4)Number indicates width in inches 	
    (5) Indicate the legs position:   L =Left, R=right	
    (6)Stainless steel thickness in gauge:14G-20G
[9] (1) Available in Stainless steel 201/304, Galvanized in legs;
    (2) Available in plastic, Stainless steel or casters in feet.

Wall Shelves[8]
  SWS-(1)(2)(3)-(4)
  
[8] (1) Number indicates length in inches 	
    (2) Number indicates width in inches 	
    (3) Wall shelf front edge shape: V-Vertical, C- Curve	
    (4) Stainless steel thickness in gauge:14G-20G

Warewashing Sink[6] [9]
  SMSHS-(1)-(2)(3)-(4)
  
[6] (1) F-with stand , W-wall mount(no feet)	
    (2) Number indicates length in inches 	
    (3) Number indicates width in inches 	
    (4) Stainless steel thickness in gauge:14G-20G
[9] (1) Available in Stainless steel 201/304, Galvanized in legs;
    (2) Available in plastic, Stainless steel or casters in feet.

Worktable[1] [9]
  SWT-(1)(2)(3)-(4)-(5)-(6)
  
[1] (1)Number indicates length in inches
    (2)Number indicates  width in inches	
    (3)Number indicates layer qty (1L=1layer,2L=2layers,etc.)	
    (4)with backsplash or without: 
       blank-flat top,
       XR -"X" means height in inch,"R" means Rear edge up,
       XRD means rear edge up in left, right and back;
       XB -X" means height in inch,"B" means Backsplash	
    (5)With Topshelf or without: S means with Topshelf, blank means without, topshelf
    configuration: a. Number of Shelves: 1L/2L/3L, etc. b. Shelf width in inches. c. Shelf
    length in inches
    (6)Stainless steel thickness in gauge:14G-20G
[9] (1) Available in Stainless steel 201/304, Galvanized in legs;
    (2) Available in plastic, Stainless steel or casters in feet.

Storage Shelf Acceptable for All Environments (including Refrigerators, Freezers, and Warewashing Areas)[7] [9]

  SS(1)(2)-(3)-(4) 

[7] (1) Number indicates length in inches 	
    (2) Number indicates  width in inches 	
    (3) Number indicates layer qty (2L,3L,etc.)	
    (4) Stainless steel thickness in gauge:14G-20G
[9] (1) Available in Stainless steel 201/304, Galvanized in legs;
    (2) Available in plastic, Stainless steel or casters in feet.

Number of matching Manufacturers is 1
Number of matching Products is 8
Processing time was 0 seconds