NSF Product and Service Listings

These NSF Official Listings are current as of Sunday, March 1, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/food/Listings.asp?Standard=002&Company=C0873536&

NSF/ANSI 2
Food Equipment


 
Libang Kitchenware Co., Ltd.  
No. 190 Xizhang Road, Gushan Town
Jiangyin City, Jiangsu Province 
China 
86 510 81630030
Visit this company's website

Facility : Jiangsu, China


Shelving Acceptable for Dry Storage and Heated Environments Only

Cabinet with Dump Sink[1]
  LBCS(6)-(1)-(2)*(3)*(4)+(5)
  
[1] (1) Number of the cabinet with dump sink.
    (2) Three or Four digits indicate length of the cabinet with dump sink in millimeters.
    (3) Three or Four digits indicate width of the cabinet with dump sink in millimeters.
    (4) Three or Four digits indicate height of the cabinet with dump sink in millimeters.
    (5) Three or Four digits indicate depth of the cabinet with dump sink in millimeters. 
        Standard size is 800mm.
    (6) 1.0 or 1.2 for plate thickness in millimeters.

Compartment Sink[2]
  LBMP-(8)-(7)-(1)-(2)*(3)*(4)*(5)+(6)
  
[2] (1) Number of sink bowls.
    (2) Three or Four digits indicate length of the sink in millimeters.    
    (3) Three or Four digits indicate width of the sink  in millimeters.    
    (4) Three or Four digits indicate height of the sink in millimeters.
    (5) Three digits indicate depth of sink in millimeters. Numbers 250.280.300.350 in 
        millimeters.
    (6) Three or four digits in millimeters represent the height of the back panel, blank 
        means no back panel.
    (7) 1.0 or 1.2 for plate thickness in millimeters.
    (8) Represents the drainboard:
        Blank: Without drainboard
        L: Left drainboard
        R: Right drainboard
        A: Both sides with drainboard

Dishtable
  LB-CDT(5)-CNR-(1)*(2)*(3)+(4)[3]
  LB-CDT(5)-L-(1)*(2)*(3)+(4)[3]
  LB-CDT(5)-R-(1)*(2)*(3)+(4)[3]
  LB-PRDT(5)-(1)*(2)*(3)+(4)[3]
  LB-SDT(5)-CNR-(1)*(2)*(3)+(4)[3]
  LB-SDT(6)-L-(1)*(2)*(3)*(4)+(5)[4]
  LB-SDT(6)-R-(1)-(2)*(3)*(4)+(5)[4]
  
[3] (1) 3 or 4 digits represents length of the dishtable  in millimeter
    (2) 3 or 4 digits represents width of the dishtable  in millimeter
    (3) 3 or 4 digits represents height of the dishtable  in millimeter
    (4) Two or three digits in millimeters represent the height of the splash edge, blank 
        means no splash edge
    (5) 1.0 or 1.2 for plate thickness in millimeters
[4] (1) Number of sink bowls
    (2) 3 or 4 digits represents length of the dishtable  in millimeter
    (3) 3 or 4 digits represents width of the dishtable  in millimete
    (4) 3 or 4 digits represents height of the dishtable  in millimete
    (5) Two or three digits in millimeters represent the height of the splash edge, blank 
        means no splash edge
    (6) 1.0 or 1.2 for plate thickness in millimeters

Drop in Hand Sink[5]
  LBDIS-HS-(6)-(5)(1)-(2)*(3)*(4)
  
[5] (1) Number of sinks.
    (2) Three or Four digits indicate length of the sink in millimeters.
    (3) Three or Four digits indicate width of the sink in millimeters.
    (4) Three digits indicate depth of sink in millimeters. Numbers 250.280.300.350 in 
        millimeters.
    (5) 1.0 or 1.2 for plate thickness in millimeters     
    (6) Represents the splash pad:
        L: Left side with splash pad
        R: Right side with splash pad
        A: Both sides with splash pad

Drop in Utensil Rinsing Sink[6]
  LBDIS(5)-(1)-(2)*(3)*(4)
  LBDIS(5)-TW(1)-(2)*(3)*(4)
  
[6] (1) Number of sinks.
    (2) Three or Four digits indicate length of the sink in millimeters.               
    (3) Three or Four digits indicate width of the sink in millimeters.
    (4) Three digits indicate depth of sink in millimeters.  Numbers 250.280.300.350 in 
        millimeters.
    (5) 1.0 or 1.2 for plate thickness in millimeters.

Food Prep Sink[7]
  LBTP(7)-(1)-(2)*(3)*(4)*(5)+(6)
  LBTP(7)-F-(1)-(2)*(3)*(4)*(5)+(6)
  
[7] (1) Number of sink bowls
    (2) Three or Four digits indicate length of the sink in millimeters.
    (3) Three or Four digits indicate width of the sink in millimeters.        
    (4) Three or Four digits indicate height of the sink in millimeters.
    (5) Three digits indicate depth of sink in millimeters. Numbers 250.280.300.350 in
    millimeters.
    (6) Three or four digits in millimeters represent the height of the back panel, blank 
        means no back panel.
    (7) 1.0 or 1.2 for plate thickness in millimeters.

Multi Station Hand Sink
  LBHS(6)-(1)*(2)*(3)*(4)+(5)[15]
  
[15] (1) Three or Four digits indicate length of the sink  in millimeters.
     (2) Three or Four digits indicate width of the sink in millimeters.
     (3) Three or Four digits indicate height of the sink in millimeters.
     (4) Three digits indicate depth of sink in millimeters. Numbers 250.280.300.350 in
     millimeters. 
     (5) Three or Four digits indicate height of back panel in millimeters. Normal standard
     is 150 mm.
     (6) 1.0 or 1.2 for plate thickness in millimeters

Stainless Steel Mop Rack[8]
  LBGS(1)-M-(2)
  
[8] (1) 1.0 or 1.2 for plate thickness in millimeters
    (2) Three or Four digits represents length of the shelving

Stainless Steel Shelving[9]
  LBGS(6)-(1)-(2)-(3)*(4)*(5)
  
[9] (1): Letters to indicate different types of Shelf
        F: Flat racks
        P: Perforated Shelves
        G: Grid shelves
        FL: Floor rack
        M: Mop rack
    (2) One digit number represents number of layers
    (3) Three or Four digits represents length of the shelving
    (4) Three or Four digits represents width of shelving
    (5) Three or Four digits represents height of shelving
    (6) 1.0 or 1.2 for plate thickness in millimeters

Stainless Steel Wall Shelvingry Storage and Heated Environments Only[10]
  LBGS(4)-(1)-(2)*(3)
  
[10] (1) Indicates layers of Wall Shelf
         W1: Single layer Wall Shelf
         W2: Double layers Wall Shelf
     (2) Three or Four digits represents length of the Wall Shelf
     (3) Three or Four digits represents width of the Wall Shelf
     (4) 1.0 or 1.2 for plate thickness in millimeters

Stainless Steel Working Cabinet[11]
  LBWC(6)-(1)-(2)*(3)*(4)*(5)
  
[11] (1)Letters to indicate the different types of working cabinet
         SD: Sliding door working cabinet
         CD: Covered door working cabinet
     (2) One digit number represents number of layers
     (3) 3 or 4 digits represents length of the working cabinet   
     (4) 3 or 4 digits represents width of the working cabinet
     (5) 3 or 4 digits represents height of the working cabinet
     (6) 1.0 or 1.2 for plate thickness in millimeters

Stainless Steel Worktable[12]
  LBWT(6)-(1)-(2)*(3)*(4)+(5)
  
[12] (1) Describe the different type of worktable:
         F:Flat Table worktable
         G:Grid worktable      
         S:Simple worktable
         M:Removable worktable
         D1:Dirty table with single hole
         D2:Dirty table with two holes                                               
         B:Worktable with water-resistant edges
     (2) 3 or 4 digits represents length of the worktable                             
     (3) 3 or 4 digits represents width of the worktable                                    
     (4) 3 or 4 digits represents height of the worktable                                    
           
     (5) Two or three digits in millimeters represent the height of the splash edge, blank 
         means no splash edge.
     (6) 1.0 or 1.2 for plate thickness in millimeters

Utility Mop Sink[13]
  LBUS/MS(4)-(1)*(2)*(3)
  
[13] (1) Three or Four digits indicate length of the sink in millimeters.
     (2) Three or Four digits indicate width of the sink in millimeters.
     (3) Three or Four digits indicate depth of the sink in millimeters. Standard size is 
         800mm.
     (4) 1.0 or 1.2 for plate thickness in millimeters.

Wall Mounted Hand Sink
  LBWS(6)-(1)-(2)*(3)*(4)+(5)[14]
  
[14] (1) One digit number indicates the type.
         1: Wall mounted single star hand wash star basin.  
         2: Wall mounted double star hand wash star basin.
     (2) Three or four digits indicate the length of the sink in millimeters.                
                                                          
     (3) Three or Four digits indicate width of the sink in millimeters.                     
                    
     (4) Three or Four digits indicate height of the sink in millimeters.                    
                                                                                             
           
     (5) The general standard for backboard height is 150 in millimeters, special cases can
     be filled in with three or four digits in millimeters.                                  
               
     (6) 1.0 or 1.2 for plate thickness in millimeters

Number of matching Manufacturers is 1
Number of matching Products is 22
Processing time was 0 seconds