NSF Product and Service Listings
These NSF Official Listings are current as of Thursday, January 15, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Food_Processing/Listings.asp?Company=C0089301&Standard=14159%2D3&
NSF/ANSI/3-A 14159-3
Hygiene Requirements for the Design of
Mechanical Belt Conveyors used in
Meat and Poultry Processing Equipment
Hygiene Requirements for the Design of
Mechanical Belt Conveyors used in
Meat and Poultry Processing Equipment
| Forbo Siegling, LLC | |
| 12201 Vanstory Drive | |
| Huntersville, NC 28078 | |
| United States | |
| 800-255-5581 | |
| 704-948-0800 | |
| Visit this company's website |
Facility : Huntersville, NC
Prolink Belt System[1] [2]
| (1)(2)(3)(4)(5)(6)(7)(8)(9)(10) |
[1] (1) Series
S4.1 - Series 4.1
S6.1 - Series 6.1
S8.1 - Series 8.1
S10 - Series 10
S13 - Series 13
S14 - Series 14
S15 - Series 15
S18 - Series 18
(2) Two digit suffix indicating open area (Can be any number). Examples include:
0 - No opening
21 - 21% open area
22 - 22% open area
23 - 23% open area
25 - 25% open area
30 - 30% open area
34 - 34% open area
36 - 36% open area
44 - 44% open area
47 - 47% open area
(3) Surface pattern
CTP - Cone top
CUT - Curved top
FLT - Flat top
FLT/NCL - Flat top side 1 and No cling side 2
GRT - Grid top
LRB - Lateral Rib
NCL - No cling
NPY - Inverted pyramid
NTP - Nub top
RSA - Reduced surface area
(4) Type
BPU - Bucket profile
CM - Center module
PIN - Coupling rod
PMC - Profile module center
PMU - Profile module universal
PMU Ixx - Profile module universal with indent, xx = indent in mm
PSU-0 - Profile module scoop, 0 = closed
PSU-xx - Profile module scoop, xx = % opening
SMA - Side module, A side
SMB - Side module, B side
SML - Side module, left
SMR - Side module, right
SMU - Side module, universal/both sides
UM - Universal module
(5) Style
G - Guided
GT - Guiding tabs
SG - Side guard
2.2 - 2.2 Collapse Factor
2.2 G - 2.2 Collapse Factor, Guided
(6) Material
PA - Polyamide 6
PE - Polyethylene
PE - MD Polyethylene metal detectable
PLX - PolyFlex
POM - Polyoxmethylene
POM - CR Polyoxmethylene cut resistant
POM - MD Polyoxmethylene metal detectable
PP - Polypropylene
PP - MD Polypropylene metal detectable
R7 - TPE 50 Shore A
R8 - TPE 55 Shore A
TPC1 - ThermoPlastic Copolyester
(7) May or may not contain the letters HA referring to HACCP type.
(8) Color
BG - Beige
BK - Black
BL - Blue
DB - Dark blue
LB – Light blue
LG - Light gray
UC – Uncolored
WT – White
(9) Height/Diameter
Height in format Hxxx at 0 - 200 mm
Pin diameter in format Dxxx at 0 - 6 mm
(10) Length/Width
Pins length format Lxxxx in mm at any size
Module width in format Wxxx in mm at any size
[2] Products are represented as Certified by product literature.
Sprocket[2] [3]
| (1)(2)(3)(4)(5)(6)(7) |
[2] Products are represented as Certified by product literature.
[3] (1) Series
S4.1 - Series 4.1
S6.1 - Series 6.1
S8.1 - Series 8.1
S10 - Series 10
S14 - Series 14
S15 - Series 15
S18 - Series 18
(2) Sprocket size: Z2 - Z100 can be any size/number of teeth
(3) Component name
SPR - Sprocket
SPR-SP - Sprocket split
(4) Material
PA - Polyamide 6
PE - Polyethylene
PE - MD Polyethylene metal detectable
PLX - PolyFlex
POM - Polyoxmethylene
POM - CR Polyoxmethylene cut resistant
POM - MD Polyoxmethylene metal detectable
PP - Polypropylene
PP - MD Polypropylene metal detectable
TPC1 - ThermoPlastic Copolyester
(5) Color
BK - Black
BL - Blue
DB - Dark blue
LB - Light blue
LG - Light gray
UC - Uncolored
WT - White
(6) Material
(SS) - Stainless steel screw and nut
(7) Internal Bore
IN - Inch
MM - Millimeter
RD - Round
SQ - Square
Can be any size
Facility : NSW, Australia
Prolink Belt System[1] [2]
| (1)(2)(3)(4)(5)(6)(7)(8)(9)(10) |
[1] (1) Series
S4.1 - Series 4.1
S6.1 - Series 6.1
S8.1 - Series 8.1
S10 - Series 10
S13 - Series 13
S14 - Series 14
S15 - Series 15
S18 - Series 18
(2) Two digit suffix indicating open area (Can be any number). Examples include:
0 - No opening
21 - 21% open area
22 - 22% open area
23 - 23% open area
25 - 25% open area
30 - 30% open area
34 - 34% open area
36 - 36% open area
44 - 44% open area
47 - 47% open area
(3) Surface pattern
CTP - Cone top
CUT - Curved top
FLT - Flat top
FLT/NCL - Flat top side 1 and No cling side 2
GRT - Grid top
LRB - Lateral Rib
NCL - No cling
NTP - Nub top
NPY - Inverted pyramid
RSA - Reduced surface area
(4) Type
BPU - Bucket profile
CM - Center module
PIN - Coupling rod
PMC - Profile module center
PMU - Profile module universal
PMU Ixx - Profile module universal with indent, xx = indent in mm
PSU-0 - Profile module scoop, 0 = closed
PSU-xx - Profile module scoop, xx = % opening
SMA - Side module, A side
SMB - Side module, B side
SML - Side module, left
SMR - Side module, right
SMU - Side module, universal/both sides
UM - Universal module
(5) Style
G - Guided
SG - Side guard
GT - Guiding tabs
2.2 - 2.2 Collapse Factor
2.2 G - 2.2 Collapse Factor, Guided
(6) Material
PA - Polyamide 6
PE - Polyethylene
PE - MD Polyethylene metal detectable
PLX - PolyFlex
POM - Polyoxmethylene
POM - CR Polyoxmethylene cut resistant
POM - MD Polyoxmethylene metal detectable
PP - Polypropylene
PP - MD Polypropylene metal detectable
R7 - TPE 50 Shore A
R8 - TPE 55 Shore A
TPC1 - ThermoPlastic Copolyester
(7) May or may not contain the letters HA referring to HACCP type.
(8) Color
BG - Beige
BK - Black
BL - Blue
DB - Dark blue
LB – Light blue
LG - Light gray
UC – Uncolored
WT – White
(9) Height/Diameter
Height in format Hxxx at 0 - 200 mm
Pin diameter in format Dxxx at 0 - 6 mm
(10) Length/Width
Pins length format Lxxxx in mm at any size
Module width in format Wxxx in mm at any size
[2] Products are represented as Certified by product literature.
Sprocket[2] [3]
| (1)(2)(3)(4)(5)(6)(7) |
[2] Products are represented as Certified by product literature.
[3] (1) Series
S4.1 - Series 4.1
S6.1 - Series 6.1
S8.1 - Series 8.1
S10 - Series 10
S14 - Series 14
S15 - Series 15
S18 - Series 18
(2) Sprocket size: Z2 - Z100 can be any size/number of teeth
(3) Component name
SPR - Sprocket
SPR-SP - Sprocket split
(4) Material
PA - Polyamide 6
PE - Polyethylene
PE - MD Polyethylene metal detectable
PLX - PolyFlex
POM - Polyoxmethylene
POM - CR Polyoxmethylene cut resistant
POM - MD Polyoxmethylene metal detectable
PP - Polypropylene
PP - MD Polypropylene metal detectable
TPC1 - ThermoPlastic Copolyester
(5) Color
BK - Black
BL - Blue
DB - Dark blue
LB - Light blue
LG - Light gray
UC - Uncolored
WT - White
(6) Material
(SS) - Stainless steel screw and nut
(7) Internal Bore
IN - Inch
MM - Millimeter
RD - Round
SQ - Square
Can be any size
Facility : Pinghu, China
Prolink Belt System[1] [2]
| (1)(2)(3)(4)(5)(6)(7)(8)(9)(10) |
[1] (1) Series
S4.1 - Series 4.1
S6.1 - Series 6.1
S8.1 - Series 8.1
S10 - Series 10
S13 - Series 13
S14 - Series 14
S15 - Series 15
S18 - Series 18
(2) Two digit suffix indicating open area (Can be any number). Examples include:
0 - No opening
21 - 21% open area
22 - 22% open area
23 - 23% open area
25 - 25% open area
30 - 30% open area
34 - 34% open area
36 - 36% open area
44 - 44% open area
47 - 47% open area
(3) Surface pattern
CTP - Cone top
CUT - Curved top
FLT - Flat top
FLT/NCL - Flat top side 1 and No cling side 2
GRT - Grid top
LRB - Lateral Rib
NCL - No cling
NTP - Nub top
NPY - Inverted pyramid
RSA - Reduced surface area
(4) Type
BPU - Bucket profile
CM - Center module
PIN - Coupling rod
PMC - Profile module center
PMU - Profile module universal
PMU Ixx - Profile module universal with indent, xx = indent in mm
PSU-0 - Profile module scoop, 0 = closed
PSU-xx - Profile module scoop, xx = % opening
SMA - Side module, A side
SMB - Side module, B side
SML - Side module, left
SMR - Side module, right
SMU - Side module, universal/both sides
UM - Universal module
(5) Style
G - Guided
GT - Guiding tabs
SG - Side guard
2.2 - 2.2 Collapse Factor
2.2 G - 2.2 Collapse Factor, Guided
(6) Material
PA - Polyamide 6
PE - Polyethylene
PE - MD Polyethylene metal detectable
PLX - PolyFlex
POM - Polyoxmethylene
POM - CR Polyoxmethylene cut resistant
POM - MD Polyoxmethylene metal detectable
PP - Polypropylene
PP - MD Polypropylene metal detectable
R7 - TPE 50 Shore A
R8 - TPE 55 Shore A
TPC1 - ThermoPlastic Copolyester
(7) May or may not contain the letters HA referring to HACCP type.
(8) Color
BG - Beige
BK - Black
BL - Blue
DB - Dark blue
LB – Light blue
LG - Light gray
UC – Uncolored
WT – White
(9) Height/Diameter
Height in format Hxxx at 0 - 200 mm
Pin diameter in format Dxxx at 0 - 6 mm
(10) Length/Width
Pins length format Lxxxx in mm at any size
Module width in format Wxxx in mm at any size
[2] Products are represented as Certified by product literature.
Sprocket[2] [3]
| (1)(2)(3)(4)(5)(6)(7) |
[2] Products are represented as Certified by product literature.
[3] (1) Series
S4.1 - Series 4.1
S6.1 - Series 6.1
S8.1 - Series 8.1
S10 - Series 10
S14 - Series 14
S15 - Series 15
S18 - Series 18
(2) Sprocket size: Z2 - Z100 can be any size/number of teeth
(3) Component name
SPR - Sprocket
SPR-SP - Sprocket split
(4) Material
PA - Polyamide 6
PE - Polyethylene
PE - MD Polyethylene metal detectable
PLX - PolyFlex
POM - Polyoxmethylene
POM - CR Polyoxmethylene cut resistant
POM - MD Polyoxmethylene metal detectable
PP - Polypropylene
PP - MD Polypropylene metal detectable
TPC1 - ThermoPlastic Copolyester
(5) Color
BK - Black
BL - Blue
DB - Dark blue
LB - Light blue
LG - Light gray
UC - Uncolored
WT - White
(6) Material
(SS) - Stainless steel screw and nut
(7) Internal Bore
IN - Inch
MM - Millimeter
RD - Round
SQ - Square
Can be any size
Facility : Pune, India
Prolink Belt System[1] [2]
| (1)(2)(3)(4)(5)(6)(7)(8)(9)(10) |
[1] (1) Series
S4.1 - Series 4.1
S6.1 - Series 6.1
S8.1 - Series 8.1
S10 - Series 10
S13 - Series 13
S14 - Series 14
S15 - Series 15
S18 - Series 18
(2) Two digit suffix indicating open area (Can be any number). Examples include:
0 - No opening
21 - 21% open area
22 - 22% open area
23 - 23% open area
25 - 25% open area
30 - 30% open area
34 - 34% open area
36 - 36% open area
44 - 44% open area
47 - 47% open area
(3) Surface pattern
FLT - Flat top
NCL - No cling
FLT/NCL - Flat top side 1 and No cling side 2
CTP - Cone top
CUT - Curved top
GRT - Grid top
LRB - Lateral Rib
NTP - Nub top
NPY - Inverted pyramid
RSA - Reduced surface area
(4) Type
BPU - Bucket profile
CM - Center module
SMA - Side module, A side
SMB - Side module, B side
SML - Side module, left
SMR - Side module, right
SMU - Side module, universal/both sides
UM - Universal module
PMC - Profile module center
PSU-0 - Profile module scoop, 0 = closed
PSU-xx - Profile module scoop, xx = % opening
PMU - Profile module universal
PMU Ixx - Profile module universal with indent, xx = indent in mm
PIN - Coupling rod
(5) Style
G - Guided
SG - Side guard
GT - Guiding tabs
2.2 - 2.2 Collapse Factor
2.2 G - 2.2 Collapse Factor, Guided
(6) Material
PA - Polyamide 6
PE - Polyethylene
PE - MD Polyethylene metal detectable
PLX - PolyFlex
PP - Polypropylene
PP - MD Polypropylene metal detectable
POM - Polyoxmethylene
POM - CR Polyoxmethylene cut resistant
POM - MD Polyoxmethylene metal detectable
R7 - TPE 50 Shore A
R8 - TPE 55 Shore A
TPC1 - ThermoPlastic Copolyester
(7) May or may not contain the letters HA referring to HACCP type.
(8) Color
BG - Beige
BK - Black
BL - Blue
DB - Dark blue
LB – Light blue
LG - Light gray
UC – Uncolored
WT – White
(9) Height/Diameter
Height in format Hxxx at 0 - 200 mm
Pin diameter in format Dxxx at 0 - 6 mm
(10) Length/Width
Pins length format Lxxxx in mm at any size
Module width in format Wxxx in mm at any size
[2] Products are represented as Certified by product literature.
Sprocket[2] [3]
| (1)(2)(3)(4)(5)(6)(7) |
[2] Products are represented as Certified by product literature.
[3] (1) Series
S4.1 - Series 4.1
S6.1 - Series 6.1
S8.1 - Series 8.1
S10 - Series 10
S14 - Series 14
S15 - Series 15
(2) Sprocket size: Z2 - Z100 can be any size/number of teeth
(3) Component name
SPR - Sprocket
SPR-SP - Sprocket split
S18 - Series 18
(4) Material
PA - Polyamide 6
PE - Polyethylene
PE - MD Polyethylene metal detectable
PLX - PolyFlex
PP - Polypropylene
PP - MD Polypropylene metal detectable
POM - Polyoxmethylene
POM - CR Polyoxmethylene cut resistant
POM - MD Polyoxmethylene metal detectable
TPC1 - ThermoPlastic Copolyester
(5) Color
BK - Black
BL - Blue
DB - Dark blue
LB - Light blue
LG - Light gray
UC - Uncolored
WT - White
(6) Material
(SS) - Stainless steel screw and nut
(7) Internal Bore
IN - Inch
MM - Millimeter
RD - Round
SQ - Square
Can be any size
Facility : Ocoyoacac, Estado de México, Mexico
Prolink Belt System[1] [2]
| (1)(2)(3)(4)(5)(6)(7)(8)(9)(10) |
[1] (1) Series
S4.1 - Series 4.1
S6.1 - Series 6.1
S8.1 - Series 8.1
S10 - Series 10
S13 - Series 13
S14 - Series 14
S15 - Series 15
S18 - Series 18
(2) Two digit suffix indicating open area (Can be any number). Examples include:
0 - No opening
21 - 21% open area
22 - 22% open area
23 - 23% open area
25 - 25% open area
30 - 30% open area
34 - 34% open area
36 - 36% open area
44 - 44% open area
47 - 47% open area
(3) Surface pattern
CTP - Cone top
CUT - Curved top
FLT - Flat top
FLT/NCL - Flat top side 1 and No cling side 2
GRT - Grid top
LRB - Lateral Rib
NCL - No cling
NPY - Inverted pyramid
NTP - Nub top
RSA - Reduced surface area
(4) Type
BPU - Bucket profile
CM - Center module
PIN - Coupling rod
PMC - Profile module center
PMU - Profile module universal
PMU Ixx - Profile module universal with indent, xx = indent in mm
PSU-0 - Profile module scoop, 0 = closed
PSU-xx - Profile module scoop, xx = % opening
SMA - Side module, A side
SMB - Side module, B side
SML - Side module, left
SMR - Side module, right
SMU - Side module, universal/both sides
UM - Universal module
(5) Style
G - Guided
GT - Guiding tabs
SG - Side guard
2.2 - 2.2 Collapse Factor
2.2 G - 2.2 Collapse Factor, Guided
(6) Material
PA - Polyamide 6
PE - Polyethylene
PE - MD Polyethylene metal detectable
PLX - PolyFlex
POM - Polyoxmethylene
POM - CR Polyoxmethylene cut resistant
POM - MD Polyoxmethylene metal detectable
PP - Polypropylene
PP - MD Polypropylene metal detectable
R7 - TPE 50 Shore A
R8 - TPE 55 Shore A
TPC1 - ThermoPlastic Copolyester
(7) May or may not contain the letters HA referring to HACCP type.
(8) Color
BG - Beige
BK - Black
BL - Blue
DB - Dark blue
LB – Light blue
LG - Light gray
UC – Uncolored
WT – White
(9) Height/Diameter
Height in format Hxxx at 0 - 200 mm
Pin diameter in format Dxxx at 0 - 6 mm
(10) Length/Width
Pins length format Lxxxx in mm at any size
Module width in format Wxxx in mm at any size
[2] Products are represented as Certified by product literature.
Sprocket[2] [3]
| (1)(2)(3)(4)(5)(6)(7) |
[2] Products are represented as Certified by product literature.
[3] (1) Series
S4.1 - Series 4.1
S6.1 - Series 6.1
S8.1 - Series 8.1
S10 - Series 10
S14 - Series 14
S15 - Series 15
S18 - Series 18
(2) Sprocket size: Z2 - Z100 can be any size/number of teeth
(3) Component name
SPR - Sprocket
SPR-SP - Sprocket split
(4) Material
PA - Polyamide 6
PE - Polyethylene
PE - MD Polyethylene metal detectable
PLX - PolyFlex
POM - Polyoxmethylene
POM - CR Polyoxmethylene cut resistant
POM - MD Polyoxmethylene metal detectable
PP - Polypropylene
PP - MD Polypropylene metal detectable
TPC1 - ThermoPlastic Copolyester
(5) Color
BK - Black
BL - Blue
DB - Dark blue
LB - Light blue
LG - Light gray
UC - Uncolored
WT - White
(6) Material
(SS) - Stainless steel screw and nut
(7) Internal Bore
IN - Inch
MM - Millimeter
RD - Round
SQ - Square
Can be any size
Facility : Malacky, Slovakia
Prolink Belt System[1] [2]
| (1)(2)(3)(4)(5)(6)(7)(8)(9)(10) |
[1] (1) Series
S4.1 - Series 4.1
S6.1 - Series 6.1
S8.1 - Series 8.1
S10 - Series 10
S13 - Series 13
S14 - Series 14
S15 - Series 15
S18 - Series 18
(2) Two digit suffix indicating open area (Can be any number). Examples include:
0 - No opening
21 - 21% open area
22 - 22% open area
23 - 23% open area
25 - 25% open area
30 - 30% open area
34 - 34% open area
36 - 36% open area
44 - 44% open area
47 - 47% open area
(3) Surface pattern
CTP - Cone top
CUT - Curved top
FLT - Flat top
FLT/NCL - Flat top side 1 and No cling side 2
GRT - Grid top
LRB - Lateral Rib
NCL - No cling
NPY - Inverted pyramid
NTP - Nub top
RSA - Reduced surface area
(4) Type
BPU - Bucket profile
CM - Center module
PIN - Coupling rod
PMC - Profile module center
PMU - Profile module universal
PMU Ixx - Profile module universal with indent, xx = indent in mm
PSU-0 - Profile module scoop, 0 = closed
PSU-xx - Profile module scoop, xx = % opening
SMA - Side module, A side
SMB - Side module, B side
SML - Side module, left
SMR - Side module, right
SMU - Side module, universal/both sides
UM - Universal module
(5) Style
G - Guided
GT - Guiding tabs
SG - Side guard
2.2 - 2.2 Collapse Factor
2.2 G - 2.2 Collapse Factor, Guided
(6) Material
PA - Polyamide 6
PE - Polyethylene
PE - MD Polyethylene metal detectable
PLX - PolyFlex
POM - Polyoxmethylene
POM - CR Polyoxmethylene cut resistant
POM - MD Polyoxmethylene metal detectable
PP - Polypropylene
PP - MD Polypropylene metal detectable
R7 - TPE 50 Shore A
R8 - TPE 55 Shore A
TPC1 - ThermoPlastic Copolyester
(7) May or may not contain the letters HA referring to HACCP type.
(8) Color
BG - Beige
BK - Black
BL - Blue
DB - Dark blue
LB – Light blue
LG - Light gray
UC – Uncolored
WT – White
(9) Height/Diameter
Height in format Hxxx at 0 - 200 mm
Pin diameter in format Dxxx at 0 - 6 mm
(10) Length/Width
Pins length format Lxxxx in mm at any size
Module width in format Wxxx in mm at any size
[2] Products are represented as Certified by product literature.
Sprocket[2] [3]
| (1)(2)(3)(4)(5)(6)(7) |
[2] Products are represented as Certified by product literature.
[3] (1) Series
S4.1 - Series 4.1
S6.1 - Series 6.1
S8.1 - Series 8.1
S10 - Series 10
S14 - Series 14
S15 - Series 15
S18 - Series 18
(2) Sprocket size: Z2 - Z100 can be any size/number of teeth
(3) Component name
SPR - Sprocket
SPR-SP - Sprocket split
(4) Material
PA - Polyamide 6
PE - Polyethylene
PE - MD Polyethylene metal detectable
PLX - PolyFlex
POM - Polyoxmethylene
POM - CR Polyoxmethylene cut resistant
POM - MD Polyoxmethylene metal detectable
PP - Polypropylene
PP - MD Polypropylene metal detectable
TPC1 - ThermoPlastic Copolyester
(5) Color
BK - Black
BL - Blue
DB - Dark blue
LB - Light blue
LG - Light gray
UC - Uncolored
WT - White
(6) Material
(SS) - Stainless steel screw and nut
(7) Internal Bore
IN - Inch
MM - Millimeter
RD - Round
SQ - Square
Can be any size
Number of matching Manufacturers is 1
Number of matching Products is 12
Processing time was 0 seconds
