[1] Products manufactured at this facility have serial numbers 14093868282-1 and greater.
[2] Letters W, X, and Y denote options for non-wetted components where:
W indicates the drive control code
X indicates the flow and pressure rating of the pump
Y indicates the voltage code
ZZZZZ indicates the liquid end handling assembly which can be any one of the following:
312SI, 352SI, 362SI, 392SI, 313SI, 353SI, 363SI, 393SI, 281TT, 35TSI, 36TSI, 39TSI,
D18AI, D58AI, D68AI, D98AI, 318SI, 358SI, 368SI, 398SI, 418SI, 458SI, 468SI, 498SI
D10AI, D50AI, D60AI, D90AI, 410SI, 450SI, 460SI, 490SI
415SI, 455SI, 465SI, 495SI
217, 257, 297, 277
419SI, 459SI, 469SI, 499SI
Where S can be substituted with N or T and A can be substituted with H. Also, I can be
substituted with U, P, or M.
[The following models are not to appear in the Official Listing]
O Metering Pumps (Similar to the P model metering pumps)
O[WX]
Letters W, X denote options for non-wetted components where:
W – indicates the drive control and voltage code (represents the W and Y of a [WXY]
model code)
X – flow and pressure rating of the pump
Certified for use with the following chemicals:
Aluminum sulfate (50%), ammonium hydroxide (29%), potassium hydroxide (45%), sodium
hydroxide (50%), sodium silicate (100%): All models.
ACH aluminum chlorohydrate (40%), ferric chloride (45%), hydrochloric acid (28%),
phosphoric acid (50%), sodium bisulfite (44%), sodium fluoride
(4%), zinc orthophosphate (100%): Model codes 0,2,3,5,7,8,T, 9
Fluosilicic acid (100%): Model code 9
Hydrochloric acid (38%): Model codes 2,3,5,8, T, 9
Phosphoric acid (75%): Model codes 2,3,5,8, T
Sodium hypochlorite (15%): Model codes 0,2,3,8, T, 9
Sulfuric acid (25%): Model codes 0, 2, 3, 8, T
Sulfuric acid (98.5%): Model codes 2, 3, 8, T
Sodium fluoride and sulfuric acid are not compatible with PE tubing option.
These products are evaluated by diluting the exposed water treatment chemical to its
typical use level (TUL), as defined in NSF/ANSI/CAN 60.
[3] D represents digital or display
W indicates the drive control type
X represents the flow and pressure rating of the pump
Y indicates the voltage code
Z indicates the liquid end handling assembly:
718NI, 718SI, 728NI, 728SI, 738NI, 738SI, 748NI, 748SI,
802NI, 802SI, 812NI, 812SI, 822NI, 822SI, 832NI, 832SI, 842NI, 842SI,
803NI, 803SI, 813NI, 813SI, 823NI, 823SI, 833NI, 833SI, 843NI, 843SI,
808NI, 808SI, 818NI, 818SI, 828NI, 828SI, 838NI, 838SI, 848NI, 848SI,
900NI, 900SI, 910NI, 910SI, 920NI, 920SI, 930NI, 930SI, 940NI, 940SI,
905NI, 905SI, 915NI, 915SI, 925NI, 925SI, 935NI, 935SI, 945NI, 945SI,
909NI, 909SI, 919NI, 919SI, 929NI, 929SI, 939NI, 939SI, 949NI, 949SI,
900NI, 900SI, 910AI, 910HI, 920AI, 920HI, 930AI, 930HI, 940AI, 940HI,
908NI, 908SI, 918AI, 918HI, 918NI, 918SI, 928AI, 928HI, 928NI,
938AI, 938HI, 938NI, 938SI, 948AI, 948HI, 948NI, 948SI,
A00NI, A00SI, A10HI, A10AI, A10NI, A10SI,
A08NI, A08SI, A18HI, A18AI, A18NI, A18SI,
A20HI, A20AI, A20NI, A20SI, A28HI, A28AI, A28NI, A28SI,
A30HI, A30AI, A30NI, A30SI, A38HI, A38AI, A38NI, A38SI,
A40HI, A40AI, A40NI, A40SI, A48HI, A48AI, A48NI, A48SI.
where "I" may be replaced with "P", "O", "U", or "X"
Certified for use with sodium hypochlorite (12.5%), sulfuric acid (98.5%), sodium
hydroxide (50%) and hydrochloric acid (30%) for PVC, PVDF and
PP heads.
Certified for use with sodium hypochlorite (12.5%), sodium hydroxide (50%) and
hydrochloric acid (30%) for Acrylic heads.
These products are evaluated by diluting the exposed water treatment chemical to its
maximum use level (MUL), as defined in NSF/ANSI Standard
60.
[4] Certified for use with 50% sodium hydroxide. These products are evaluated by diluting
the exposed water treatment chemical to its maximum use
level (MUL), as defined in NSF/ANSI/CAN 60.
Digits D, W, X, and Y denote options for non-wetted components where:
D represents digital or display
W indicates the drive control type
X indicates the flow and pressure rating of the pump
Y indicates the voltage code
Z indicates the liquid end handling assembly: 907NP, 927NP, 937NP, 947NP
[6] ERBXXX and XRDXXX represents the drive unit and may be ERBX2X, ERBX3X or ERBX4X, XRDX2X,
XRDX3X, or XRDX4X. Different drive types have different liquid end assemblies.
ZZZZZZZZZ represents the following liquid end assemblies:
A44ACA7T1, A44ACA7M2, A44ACA2FN, A46TCN4PN, A46TCN4TN, A46TCN2FN, A74TCA7T1, A74TCA7M2,
A74TCA2FN, A74TCA7DN, A76TCN7PN, A76TCN7TN, A76TCN2FN, A76TCN7FN, A46VCN2FN, A46VCN4PN,
A46VCN4TN, A76VCN2FN, A76VCN7FN, A76VCN7PN, A76VCN7TN, A44ACA7PN, A74TCA7PN,
A44ATA7T1,A44ATA7PN, A44ATA7M2,A44ATA2FN, A74ATA7T1, A74ATA7PN, A74ATA7M2, A74ATA2FN,
A74ATA7DN,A76ATN7PN, A76ATN7TN, A76ATN2FN, A76ATN7FN, A46ACN4PN, A46ACN4TN, A46ACN2FN,
A76ACN7PN,A76ACN7TN, A76ACN2FN, A76ACN7FN.
Certified for use with:
Sodium hypochlorite (12.5%)
Hydrochloric acid [Muriatic acid] (30%)
Sulfuric acid (98.5%)
Sodium hydroxide (50%)
A1411V1PN, A1611V1PN, V44T1N4T3, V46T1N4P4, V46T1N4T4, S1414V1PN, S1614V1PN, A44A1A7T1,
A44A1A7M2, A44A1A2FN, A46T1N4PN, A46T1N4TN, A46T1N2FN, A46V1N2FN, A46V1N4PN, A46V1N4TN,
A44A1A7PN, A46A1N4PN, A46A1N4TN, A46A1N2FN, A1411A1PN, A1611A1PN, V44T1N4P4.
Certified for use with:
Sodium hydroxide (50%)
ZZZZZZZZ is the Liquid End code, in the following order:
Z1 Type (May be A, V or S)
Z2 Head Material (May be 1 [316L], 2 [PVC], 4 [PP] or 7 [PVDF])
Z3 Size (May be 4 or 6 [Diaphragm Size])
Z4 Seat (May be A [Aflas], T [PTFE], V [Viton], or 1 [316L])
Z5 Ball Material (May be C [Ceramic], 1 [316L], 4 [440C] or T [PTFE])
Z6 O-Ring (May be N [None], A [Aflas] or V [Viton])
Z7 Fitting Material (May be 1 [316L], 2 [PVC], 4 [PP] or 7 [PVDF])
Z8 Fitting Connection (May be P [NPT], B [BSP], S [Socket], T [Inch Tube],M [Metric
Tube], F ([DN15 Female] or D [DN15 Male])
Z9 Tubing Kit (May be N [None], 1, 2, 3 or 4)
These products are evaluated by diluting the exposed water treatment chemical to its
typical use level (TUL), as defined in NSF/ANSI/CAN 60.
[7] [LE-ZZZZZZZZZ] are the liquid end assemblies. [ERBX2X], [ERBX3X], [ERBX4X], [XRDX2X],
[XRDX3X] and [XRDX4X] are the drive units. The drive units are only Certified for use
with the Certified liquid end assemblies.
[8] Certified for use with:
Aluminum sulfate (50%), ammonium hydroxide (29%), potassium hydroxide (45%), sodium
hydroxide (50%), sodium silicate (100%) , ACH
aluminum chlorohydrate (40%), ferric chloride (45%), hydrochloric acid (28%), phosphoric
acid (50%), sodium bisulfite (44%), sodium fluoride (4%),
zinc orthophosphate (100%), Fluosilicic acid (100%), Hydrochloric acid (38%), Phosphoric
acid (75%), Sodium hypochlorite (15%), Sulfuric acid
(25%), and sulfuric acid (98.5%)
Sodium fluoride and sulfuric acid are not compatible with PE tubing option.
These products are evaluated by diluting the exposed water treatment chemical to its
typical use level (TUL), as defined in NSF/ANSI/CAN 60.
[9] MacRoy D
DXYYXXYYY
Y: options for non-wetted components
X: options are for wetted components
D indicates the frame size
X1 indicates liquid end size options (may be 2 [0.7 GPH], 4 [14.4 GPH], 7 [50 GPH], 8
[127 GPH])
Y1 (non-wetted material) indicates Stroking speed
Y2 (non-wetted material) indicates motor &/or mount code
X2 indicates liquid end options (may be 2 [PVDF], 4 [Black Polypropylene], 7 [316 SS], 8
[PVC], A [Acrylic], P [Polymer Service], L [Slurry
Applications], N [H2SO4 Applications])
X3 indicates the tubing connection (may be P [NPT], T [Tubing], B [Bleed Valve NPT], C
[Bleed Valve Tubing])
Y3 (non-wetted material) Capacity Control
Y4 (non-wetted material) Double Diaphragm
Y5 (non-wetted material) Base Code
Y6 (non-wetted material) Stroke Code
[10] LMI Series SD
SDXYYXX
Y: options for non-wetted components
X: options are for wetted components
SG indicates the frame size
X1 indicates liquid end size options (may be 2 [0.18-0.7 GPH], 4 [3-14.4 GPH], 7 [13-50
GPH], 8 [31-127 GPH])
Y1 (non-wetted material) indicates gear ratio code
Y2 (non-wetted material) indicates motor &/or mount code options
X2 indicates liquid end options (may be 2 [PVDF], 7 [316 SS], 8 [PVC], P [Polymer
Service], L [Slurry Applications], N [H2SO4 Applications])
X3 indicates the tubing connection (may be P [NPT], T [Tubing])
[11] MacRoy G
GXYYXXYYY
Y: options for non-wetted components
X: options are for wetted components
G indicates the frame size
X1 indicates liquid end size options (may be 5 [106 GPH], 6 [147 GPH], 7 [300 GPH])
Y1 (non-wetted material) indicates Stroking speed
Y2 (non-wetted material) indicates motor &/or mount code options
X2 indicates liquid end options (may be 2 [PVDF], 4 [Black Polypropylene], 7 [316 SS], 8
[PVC], C [Caustic Applications], F [Fluoride Applications], A [Acrylic], P [Polymer
Service], L [Slurry Applications], N [H2SO4 Applications])
X3 indicates the tubing connection (may be P [NPT], T [Tubing], B [Bleed Valve NPT], C
[Bleed Valve Tubing], Q [Solvent Weld])
Y3 (non-wetted material) Capacity Control
Y4 (non-wetted material) Double Diaphragm
Y5 (non-wetted material) Base Code
Y6 (non-wetted material) Stroke Code
[12] LMI Series SG
SGXYYXX
Y: options for non-wetted components
X: options are for wetted components
SG indicates the frame size
X1 indicates liquid end size options (may be 5 [26-106 GPH], 6 [36-147 GPH], 7 [75-300
GPH])
Y1 (non-wetted material) indicates gear ratio code
Y2 (non-wetted material) indicates motor &/or mount code options
X2 indicates liquid end options (may be 2 [PVDF], 1 [White Polypropylene], 7 [316 SS], 8
[PVC], C [Caustic Applications], F [Fluoride Applications],
P [Polymer Service], L [Slurry Applications], N [H2SO4 Applications])
X3 indicates the tubing connection (may be P [NPT], T [Tubing])
[LL] Product conforms with lead content requirements for “lead free” plumbing as defined by
California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water
Act.
|
