NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, January 15, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Lead_Content/Listings.asp?Standard=372%2DADD&Company=C0319497&

NSF/ANSI/CAN 372
Drinking Water System Components - Lead Content


 
Radius Systems Ltd. 
Radius House, Berristow Lane
South Normanton, Alfreton 
Derbyshire DE55 2JJ 
United Kingdom 
44 177 381 1112
Visit this company's website

Facility : Derbyshire, United Kingdom


Coatings - Fittings [LL]
   Subcote FLP II[1] [2] 

[1] Colors: Pale Sage Green
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 40-276
    Maximum thinner: None
    Final Cure Time and Temperature: 1 hour at 3°C
    Special Comments: Mix ratio of Part A:B is 3:2 by volume or 100:72 by weight.  100%
    solids.  Product requires disinfection using 100mg/liter of free chlorine for periods up
    to 30 minutes.  After disinfection, the main shall be flushed with cold water for a
    minimum period of 1 hour at a minimum flow velocity of 0.5 m.s-1.
[2] Product requires disinfection using a maximum of 100mg/liter of free chlorine for
    periods up to 30 minutes maximum.  After disinfection, the main shall be flushed with
    cold water for a minimum period of 1 hour at a minimum flow velocity of 0.5 m.s-1. 
    Please reference manufacturer's product instructions for flushing recommendations for
    additional product size ranges.
[LL] Product conforms with lead content requirements for “lead free” plumbing as defined by
     California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water
     Act.

Coatings - Pipe - Immediate Return to Service [LL]
   Subcote FLP II[1] [2] [3] 

[1] Colors: Pale Sage Green
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 40-276
    Maximum thinner: None
    Final Cure Time and Temperature: 1 hour at 3°C
    Special Comments: Mix ratio of Part A:B is 3:2 by volume or 100:72 by weight.  100%
    solids.  Product requires disinfection using 100mg/liter of free chlorine for periods up
    to 30 minutes.  After disinfection, the main shall be flushed with cold water for a
    minimum period of 1 hour at a minimum flow velocity of 0.5 m.s-1.
[2] Product requires disinfection using a maximum of 100mg/liter of free chlorine for
    periods up to 30 minutes maximum.  After disinfection, the main shall be flushed with
    cold water for a minimum period of 1 hour at a minimum flow velocity of 0.5 m.s-1. 
    Please reference manufacturer's product instructions for flushing recommendations for
    additional product size ranges.
[3] Evaluated for Immediate Return to Service.
[LL] Product conforms with lead content requirements for “lead free” plumbing as defined by
     California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water
     Act.

Coatings - Tank [LL]
   Subcote FLP II[1] [2] 

[1] Colors: Pale Sage Green
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 40-276
    Maximum thinner: None
    Final Cure Time and Temperature: 1 hour at 3°C
    Special Comments: Mix ratio of Part A:B is 3:2 by volume or 100:72 by weight.  100%
    solids.  Product requires disinfection using 100mg/liter of free chlorine for periods up
    to 30 minutes.  After disinfection, the main shall be flushed with cold water for a
    minimum period of 1 hour at a minimum flow velocity of 0.5 m.s-1.
[2] Product requires disinfection using a maximum of 100mg/liter of free chlorine for
    periods up to 30 minutes maximum.  After disinfection, the main shall be flushed with
    cold water for a minimum period of 1 hour at a minimum flow velocity of 0.5 m.s-1. 
    Please reference manufacturer's product instructions for flushing recommendations for
    additional product size ranges.
[LL] Product conforms with lead content requirements for “lead free” plumbing as defined by
     California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water
     Act.

Coatings - Valve [LL]
   Subcote FLP II[1] [2] 

[1] Colors: Pale Sage Green
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 40-276
    Maximum thinner: None
    Final Cure Time and Temperature: 1 hour at 3°C
    Special Comments: Mix ratio of Part A:B is 3:2 by volume or 100:72 by weight.  100%
    solids.  Product requires disinfection using 100mg/liter of free chlorine for periods up
    to 30 minutes.  After disinfection, the main shall be flushed with cold water for a
    minimum period of 1 hour at a minimum flow velocity of 0.5 m.s-1.
[2] Product requires disinfection using a maximum of 100mg/liter of free chlorine for
    periods up to 30 minutes maximum.  After disinfection, the main shall be flushed with
    cold water for a minimum period of 1 hour at a minimum flow velocity of 0.5 m.s-1. 
    Please reference manufacturer's product instructions for flushing recommendations for
    additional product size ranges.
[LL] Product conforms with lead content requirements for “lead free” plumbing as defined by
     California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water
     Act.
Number of matching Manufacturers is 1
Number of matching Products is 4
Processing time was 0 seconds