NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, January 29, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Lead_Content/Listings.asp?Standard=372%2DADD&Company=C0349945&

NSF/ANSI/CAN 372
Drinking Water System Components - Lead Content


 
IFS Coatings Inc. 
3601 North Interstate 35
Gainesville, TX 76240 
United States 
940-668-1062

Facility : Gainesville, TX


Coatings - Fittings [LL]
   Black (ERSS11685) [1]
   Blue (ERSS22597) [2]
   Brown (ERSS47676) [3]
   Gray (ERSS75636) [2]
   Green (ERSS33254) [2]
   Red (ERSS62900) [2]
   White (ERSS83401) [2]
   Yellow (ERSS51039) [2] 

[1] Colors: Black
    Number of coats: 1
    Maximum field use dry film thickness (in mils): 60 mils
    Final cure time and temperature: 10 minutes at 400°F
    Special Comments: Pre-heat part to 400°F-475°F before powder application (depending on
    thickness of the substrate and application)
[2] Colors: Blue, Gray, Green, Red, White, Yellow
    Number of coats: 1
    Maximum field use dry film thickness (in mils): 20 mils
    Final cure time and temperature: 10 minutes at 400°F
    Special Comments: Pre-heat part to 400°F-475°F before powder application (depending on
    thickness of the substrate and application)
[3] Colors: Brown
    Number of coats: 1
    Maximum field use dry film thickness (in mils): 20 mils
    Final cure time and temperature: 15 minutes at 400°F
    Special Comments: Pre-heat part to 400°F-475°
[LL] Product conforms with lead content requirements for “lead free” plumbing as defined by
     California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water
     Act.

Coatings - Pipe [LL]
   Black (ERSS11685) [1]
   Blue (ERSS22597) [2]
   Brown (ERSS47676) [3]
   Gray (ERSS75636) [2]
   Green (ERSS33254) [2]
   Red (ERSS62900) [2]
   White (ERSS83401) [2]
   Yellow (ERSS51039) [2] 

[1] Colors: Black
    Number of coats: 1
    Maximum field use dry film thickness (in mils): 60 mils
    Final cure time and temperature: 10 minutes at 400°F
    Special Comments: Pre-heat part to 400°F-475°F before powder application (depending on
    thickness of the substrate and application)
[2] Colors: Blue, Gray, Green, Red, White, Yellow
    Number of coats: 1
    Maximum field use dry film thickness (in mils): 20 mils
    Final cure time and temperature: 10 minutes at 400°F
    Special Comments: Pre-heat part to 400°F-475°F before powder application (depending on
    thickness of the substrate and application)
[3] Colors: Brown
    Number of coats: 1
    Maximum field use dry film thickness (in mils): 20 mils
    Final cure time and temperature: 15 minutes at 400°F
    Special Comments: Pre-heat part to 400°F-475°
[LL] Product conforms with lead content requirements for “lead free” plumbing as defined by
     California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water
     Act.

Coatings - Pump [LL]
   Black (ERSS11685) [1]
   Blue (ERSS22597) [2]
   Brown (ERSS47676) [3]
   Gray (ERSS75636) [2]
   Green (ERSS33254) [2]
   Red (ERSS62900) [2]
   White (ERSS83401) [2]
   Yellow (ERSS51039) [2] 

[1] Colors: Black
    Number of coats: 1
    Maximum field use dry film thickness (in mils): 60 mils
    Final cure time and temperature: 10 minutes at 400°F
    Special Comments: Pre-heat part to 400°F-475°F before powder application (depending on
    thickness of the substrate and application)
[2] Colors: Blue, Gray, Green, Red, White, Yellow
    Number of coats: 1
    Maximum field use dry film thickness (in mils): 20 mils
    Final cure time and temperature: 10 minutes at 400°F
    Special Comments: Pre-heat part to 400°F-475°F before powder application (depending on
    thickness of the substrate and application)
[3] Colors: Brown
    Number of coats: 1
    Maximum field use dry film thickness (in mils): 20 mils
    Final cure time and temperature: 15 minutes at 400°F
    Special Comments: Pre-heat part to 400°F-475°
[LL] Product conforms with lead content requirements for “lead free” plumbing as defined by
     California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water
     Act.

Coatings - Tank [LL]
   Black (ERSS11685) [1]
   Blue (ERSS22597) [2]
   Brown (ERSS47676) [3]
   Gray (ERSS75636) [2]
   Red (ERSS62900) [2]
   White (ERSS83401) [2]
   Yellow (ERSS51039) [2] 

[1] Colors: Black
    Number of coats: 1
    Maximum field use dry film thickness (in mils): 60 mils
    Final cure time and temperature: 10 minutes at 400°F
    Special Comments: Pre-heat part to 400°F-475°F before powder application (depending on
    thickness of the substrate and application)
[2] Colors: Blue, Gray, Green, Red, White, Yellow
    Number of coats: 1
    Maximum field use dry film thickness (in mils): 20 mils
    Final cure time and temperature: 10 minutes at 400°F
    Special Comments: Pre-heat part to 400°F-475°F before powder application (depending on
    thickness of the substrate and application)
[3] Colors: Brown
    Number of coats: 1
    Maximum field use dry film thickness (in mils): 20 mils
    Final cure time and temperature: 15 minutes at 400°F
    Special Comments: Pre-heat part to 400°F-475°
[LL] Product conforms with lead content requirements for “lead free” plumbing as defined by
     California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water
     Act.

Coatings - Valve [LL]
   Black (ERSS11685) [1]
   Blue (ERSS22597) [2]
   Brown (ERSS47676) [3]
   Gray (ERSS75636) [2]
   Green (ERSS33254) [2]
   Red (ERSS62900) [2]
   White (ERSS83401) [2]
   Yellow (ERSS51039) [2] 

[1] Colors: Black
    Number of coats: 1
    Maximum field use dry film thickness (in mils): 60 mils
    Final cure time and temperature: 10 minutes at 400°F
    Special Comments: Pre-heat part to 400°F-475°F before powder application (depending on
    thickness of the substrate and application)
[2] Colors: Blue, Gray, Green, Red, White, Yellow
    Number of coats: 1
    Maximum field use dry film thickness (in mils): 20 mils
    Final cure time and temperature: 10 minutes at 400°F
    Special Comments: Pre-heat part to 400°F-475°F before powder application (depending on
    thickness of the substrate and application)
[3] Colors: Brown
    Number of coats: 1
    Maximum field use dry film thickness (in mils): 20 mils
    Final cure time and temperature: 15 minutes at 400°F
    Special Comments: Pre-heat part to 400°F-475°
[LL] Product conforms with lead content requirements for “lead free” plumbing as defined by
     California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water
     Act.
Number of matching Manufacturers is 1
Number of matching Products is 39
Processing time was 1 seconds