NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, January 15, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Lead_Content/Listings.asp?Standard=372%2DADD&Company=C0482913&

NSF/ANSI/CAN 372
Drinking Water System Components - Lead Content


 
IMI Critical Engr PBM LLC 
1070 Sandy Hill Road
Irwin, PA 15642 
United States 
800-867-4726 
724-863-0550 X113

Facility : Irwin, PA


Valves [LL]
   2-PIECE 2-WAY BALL VALVES[1]
   3-PIECE 2-WAY BALL VALVES[2]
   3-PIECE 2-WAY OR 3-WAY BALL VALVES[1]
   MULTIPORT BALL VALVES[1]
   MULTIPORT BALL VALVES[2] 

[1] Trade names have the following naming scheme:
    (A)(B)(C)(E)(F)(G)(H)(I)(J)(K)
    A - Product
    B - Material (G= Lead free bronze, H - 316/316L stainless steel, HL - 316L 
        stainless steel)*
    C - Size
    D - Series
    E - End connection
    F - Seat and Seal/O-ring (A - RTFE/FKM, G - V-TEF/FKM, H - S-TEF/FKM, V - RTFE/EPR, 
        Z - V-TEF/EPR, 0 - S-TEF/EPR)**
    G - Flow Pattern or Purge ports
    H - Ball/Stem options (- = Standard [316/316L SS ball & stem], I = Monel ball, 
        K = Monel stem & followers, L = Monel ball, stem & followers, O = Hastelloy 
        C-276 ball, P = C-276 ball, stem & followers, R = Monel stem, followers & bolting, 
        S = Monel ball, stem, followers & bolting, W = Lead-Free Bronze ball, X = Lead-
        Free 
        Bronze ball, Monel Stem & followers, Y = Lead-Free Bronze ball, Hastelloy C-276 
        Stem & followers)
    I - Operator
    J - Polish
    K - Miscellaneous
    *For valves with two different materials, use the 1st position for body material and the
    2nd position for end fitting material
    **V-TEF is the IMI Critical Engr PBM LLC material name for TFMTM 1600 PTFE (also known
    as "TFM 1600" or "TFM1600"). S-TEF is the IMI Critical Engr PBM LLC material name for
    50% stainless steel + 50% virgin PTFE (also known as "316 SS RTFE" or "50% PTFE, 50% 316
    Stainless").
[2] Trade names have the following naming scheme:
    (A)(B)(C)(D)(E)(F)(G)(H)(I)(J)(K)
    A - Product
    B - Material (1 = 90/10 Cu/Ni)*
    C - Size
    D - Series
    E - End connection
    F - Seat and Seal/O-ring (A = RTFE/FKM, G = V-TEF/FKM, H = S-TEF/FKM, V = RTFE/EPR, Z =
    V-TEF/EPR, 0 = S-TEF/EPR)**
    G - Flow Pattern or Purge ports
    H - Ball/Stem options (- = Standard [316/316L SS ball & stem], I = Monel ball, K = Monel
    stem & followers, L = Monel ball, stem & followers, O =
    Hastelloy C-276 ball, P = C-276 ball, stem & followers, R = Monel stem, followers &
    bolting, S = Monel ball, stem, followers & bolting, W = Lead-Free
    Bronze ball, X = Lead-Free Bronze ball, Monel Stem & followers, Y = Lead-Free Bronze
    ball, Hastelloy C-276 Stem & followers)
    I - Operator
    J - Polish
    K - Miscellaneous
    * For valves with two different materials, use the 1st position for body material and
    the 2nd position for end fitting material. Note that 90/10 CuNi is
    used for end fitting material only.
    **V-TEF is the IMI Critical Engr PBM LLC material name for TFMTM 1600 PTFE (also known
    as “TFM 1600” or “TFM1600”). S-TEF is the IMI Critical
    Engr PBM LLC material name for 50% stainless steel + 50% virgin PTFE (also known as “316
    SS RTFE” or “50% PTFE, 50% 316 Stainless”)
[LL] Product conforms with lead content requirements for “lead free” plumbing as defined by
     California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water
     Act.
Number of matching Manufacturers is 1
Number of matching Products is 5
Processing time was 0 seconds