NSF Product and Service Listings
These NSF Official Listings are current as of Thursday, January 15, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?Company=02750&Standard=014&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| Golan Renewable Industries Ltd. | |
| Kibbutz Shaar Hagolan | |
| M.P. Jordan Valley 15145 | |
| Israel | |
| 972 46 677432 | |
| Visit this company's website |
Facility : Peculiar, MO
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe^ ¢ § $$ +++ |
PEX 3106 |
AquaHeat PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 6" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe^ ¢ § $$ +++ |
PEX 3106 |
AquaHeat PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 6" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe^ ¢ § $$ +++ |
PEX 3106 |
AquaSeal PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 6" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe^ ¢ § $$ +++ |
PEX 3106 |
AquaSeal PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 6" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe^ § $$ +++ |
PEX 5106 |
AquaHeat PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 1" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe# ^ ¢ § $$ +++ |
PEX 5106 |
AquaHeat PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 1" DR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
qualified through testing. Please verify that tubing certified against CSA B137.5 is
only marked with the following fitting system designation(s): ASTM F877, ASTM F2080,
ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe^ § $$ +++ |
PEX 5106 |
AquaSeal PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 1" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe# ^ ¢ § $$ +++ |
PEX 5106 |
AquaSeal PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 1" DR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
qualified through testing. Please verify that tubing certified against CSA B137.5 is
only marked with the following fitting system designation(s): ASTM F877, ASTM F2080,
ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe^ ¢ § $$ +++ |
PEX 3106 |
HeatFlow PEX PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 6" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe^ ¢ § $$ +++ |
PEX 3106 |
HeatFlow PEX PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 6" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe^ § $$ +++ |
PEX 5106 |
HeatFlow PEX PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 1" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe^ ¢ § $$ +++ |
PEX 3106 |
Pexgol PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 6" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe^ ¢ § $$ +++ |
PEX 3106 |
Pexgol PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 6" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe# ^ ¢ § $$ +++ |
PEX 5106 |
HeatFlow PEX PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 1" DR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
qualified through testing. Please verify that tubing certified against CSA B137.5 is
only marked with the following fitting system designation(s): ASTM F877, ASTM F2080,
ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe^ § $$ +++ |
PEX 5106 |
Pexgol PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 1" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe# ^ ¢ § $$ +++ |
PEX 5106 |
Pexgol PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 1" DR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
qualified through testing. Please verify that tubing certified against CSA B137.5 is
only marked with the following fitting system designation(s): ASTM F877, ASTM F2080,
ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe^ ¢ § $$ +++ |
PEX 3106 |
Plumber Friendly PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 6" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe^ ¢ § $$ +++ |
PEX 3106 |
Plumber Friendly PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 6" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe^ § $$ +++ |
PEX 5106 |
Plumber Friendly PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 1" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe# ^ ¢ § $$ +++ |
PEX 5106 |
Plumber Friendly PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 1" DR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
qualified through testing. Please verify that tubing certified against CSA B137.5 is
only marked with the following fitting system designation(s): ASTM F877, ASTM F2080,
ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe^ ¢ § $$ +++ |
PEX 3106 |
Sioux Chief PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 6" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe^ ¢ § $$ +++ |
PEX 3106 |
Sioux Chief PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 6" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe^ § $$ +++ |
PEX 5106 |
Sioux Chief PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 1" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe# ^ ¢ § $$ +++ |
PEX 5106 |
Sioux Chief PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 1" DR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
qualified through testing. Please verify that tubing certified against CSA B137.5 is
only marked with the following fitting system designation(s): ASTM F877, ASTM F2080,
ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe^ ¢ § $$ +++ |
PEX 3106 |
Slant/Fin Heating PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 6" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe^ ¢ § $$ +++ |
PEX 3106 |
Slant/Fin Heating PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 6" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe^ ¢ § $$ +++ |
PEX 3106 |
Slant/Fin Plumbing PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 6" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe^ ¢ § $$ +++ |
PEX 3106 |
Slant/Fin Plumbing PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 6" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe^ § $$ +++ |
PEX 5106 |
Slant/FIN Heating PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 1" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe# ^ § $$ +++ |
PEX 5106 |
Slant/FIN Heating PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 1" DR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
qualified through testing. Please verify that tubing certified against CSA B137.5 is
only marked with the following fitting system designation(s): ASTM F877, ASTM F2080,
ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe^ § $$ +++ |
PEX 5106 |
Slant/FIN Plumbing PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 1" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe# ^ ¢ § $$ +++ |
PEX 5106 |
Slant/FIN Plumbing PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 1" DR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
qualified through testing. Please verify that tubing certified against CSA B137.5 is
only marked with the following fitting system designation(s): ASTM F877, ASTM F2080,
ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe^ ¢ § $$ +++ |
PEX 3106 |
Terratherma PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 6" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe^ ¢ § $$ +++ |
PEX 3106 |
Terratherma PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 6" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe^ § $$ +++ |
PEX 5106 |
Terratherma PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 1" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe# ^ ¢ § $$ +++ |
PEX 5106 |
Terratherma PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 1" DR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
qualified through testing. Please verify that tubing certified against CSA B137.5 is
only marked with the following fitting system designation(s): ASTM F877, ASTM F2080,
ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange or red barrier material
on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Radiant Floor Heating
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe¢ § $$ |
PEX 3106 |
AquaHeat PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 6" SDR 9 | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe# ¢ § $$ |
PEX 3106 |
AquaHeat PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 6" SDR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F877, ASTM F2080, ASTM F1960. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe¢ § $$ |
PEX 3106 |
AquaSeal PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 6" SDR 9 | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe# ¢ § $$ |
PEX 3106 |
AquaSeal PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 6" SDR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F877, ASTM F2080, ASTM F1960. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe¢ § $$ |
PEX 3106 |
Pexgol PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 6" SDR 9 | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe# ¢ § $$ |
PEX 3106 |
Pexgol PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 6" SDR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F877, ASTM F2080, ASTM F1960. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe¢ § $$ |
PEX 3106 |
Plumber Friendly PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 6" SDR 9 | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe# ¢ § $$ |
PEX 3106 |
Plumber Friendly PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 6" SDR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F877, ASTM F2080, ASTM F1960. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe¢ § $$ |
PEX 3106 |
Sioux Chief PEX PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 6" SDR 9 | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe# ¢ § $$ |
PEX 3106 |
Sioux Chief PEX PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 6" SDR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F877, ASTM F2080, ASTM F1960. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe¢ § $$ |
PEX 3106 |
Slant/Fin Heating PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 6" SDR 9 | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe# ¢ § $$ |
PEX 3106 |
Slant/Fin Heating PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 6" SDR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F877, ASTM F2080, ASTM F1960. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe¢ § $$ |
PEX 3106 |
Slant/Fin Plumbing PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 6" SDR 9 | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe# ¢ § $$ |
PEX 3106 |
Slant/Fin Plumbing PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 6" SDR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F877, ASTM F2080, ASTM F1960. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe¢ § $$ |
PEX 3106 |
Terratherma PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 6" SDR 9 | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe# ¢ § $$ |
PEX 3106 |
Terratherma PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 6" SDR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F877, ASTM F2080, ASTM F1960. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Facility : Jordan Valley, Israel
Oil and Gas Producing Applications - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Tubing |
PEX 0006 |
Pexgol PE-Xa Black |
ASTM F2905 |
|||
| 3" - 18" SDR 7.3 | ||||||
| 3" - 20" SDR 8.3 | ||||||
| 3" - 24" SDR 9 | ||||||
| 3" - 36" SDR 11 | ||||||
| 3" - 36" SDR 13.5 | ||||||
| 3" - 48" SDR 15.5 | ||||||
| 3" - 54" SDR 17 | ||||||
| 3" - 54" SDR 21 | ||||||
| 16 mm - 355 mm SDR 6 | ||||||
| 16 mm - 450 mm SDR 7.4 | ||||||
| 16 mm - 800 mm SDR 9 | ||||||
| 16 mm - 630 mm SDR 11 | ||||||
| 16 mm - 630 mm SDR 13.6 | ||||||
| 16 mm - 630 mm SDR 16.2 | ||||||
| 16 mm - 630 mm SDR 17 | ||||||
| 16 mm - 630 mm SDR 21 | ||||||
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe^ § $$ +++ |
PEX 5106 |
AquaHeat PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 1" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe* ^ ¢ $$ +++ |
PEX 3106 |
AquaHeat PE-Xa Natural |
ASTM F2788/F2788M |
|||
| 1/2" - 14" SDR 6 DR 6 | ||||||
| 16 mm - 355 mm DR 6 | ||||||
| 1/2" - 18" DR 7.4 | ||||||
| 16 mm - 450 mm DR 7.4 | ||||||
| 1/2" - 25" DR 9 | ||||||
| 16 mm - 630 mm DR 9 | ||||||
| 3/4" - 25" DR 11 | ||||||
| 20 mm - 630 mm DR 11 | ||||||
| 1" - 25" DR 13.6 | ||||||
| 25 mm - 630 mm DR 13.6 | ||||||
| 1 1/4" - 25" DR 16.2 | ||||||
| 32 mm - 630 mm DR 16.2 | ||||||
| 1 1/4" - 25" DR 17 | ||||||
| 32 mm - 630 mm DR 17 | ||||||
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe^ ¢ § $$ +++ |
PEX 3106 |
AquaHeat PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 6" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe# ^ ¢ § $$ +++ |
PEX 3106 |
AquaHeat PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 6" DR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
qualified through testing. Please verify that tubing certified against CSA B137.5 is
only marked with the following fitting system designation(s): ASTM F877, ASTM F2080,
ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe# ^ ¢ § $$ +++ |
PEX 5106 |
AquaHeat PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 1" DR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
qualified through testing. Please verify that tubing certified against CSA B137.5 is
only marked with the following fitting system designation(s): ASTM F877, ASTM F2080,
ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe* ^ ¢ $$ +++ |
PEX 3106 |
AquaSeal PE-Xa Natural |
ASTM F2788/F2788M |
|||
| 1/2" - 14" DR 6 | ||||||
| 16 mm - 355 mm DR 6 | ||||||
| 1/2" - 18" DR 7.4 | ||||||
| 16 mm - 450 mm DR 7.4 | ||||||
| 1/2" - 25" SDR 9 | ||||||
| 16 mm - 630 mm SDR 9 | ||||||
| 3/4" - 25" SDR 11 | ||||||
| 20 mm - 630 mm SDR 11 | ||||||
| 1" - 25" DR 13.6 | ||||||
| 25 mm - 630 mm DR 13.6 | ||||||
| 1 1/4" - 25" DR 16.2 | ||||||
| 32 mm - 630 mm DR 16.2 | ||||||
| 1 1/4" - 25" SDR 17 | ||||||
| 32 mm - 630 mm SDR 17 | ||||||
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe^ ¢ § $$ +++ |
PEX 3106 |
AquaSeal PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 6" SDR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe^ § $$ +++ |
PEX 5106 |
AquaSeal PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 1" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe# ^ ¢ § $$ +++ |
PEX 3106 |
AquaSeal PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 6" SDR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
qualified through testing. Please verify that tubing certified against CSA B137.5 is
only marked with the following fitting system designation(s): ASTM F877, ASTM F2080,
ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe# ^ ¢ § $$ +++ |
PEX 5106 |
AquaSeal PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 1" DR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
qualified through testing. Please verify that tubing certified against CSA B137.5 is
only marked with the following fitting system designation(s): ASTM F877, ASTM F2080,
ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe* ^ ¢ $$ +++ |
PEX 3106 |
HeatFlow PEX PE-Xa Natural |
ASTM F2788/F2788M |
|||
| 1/2" - 14" DR 6 | ||||||
| 16 mm - 355 mm DR 6 | ||||||
| 1/2" - 18" DR 7.4 | ||||||
| 16 mm - 450 mm DR 7.4 | ||||||
| 1/2" - 25" SDR 9 | ||||||
| 16 mm - 630 mm SDR 9 | ||||||
| 3/4" - 25" SDR 11 | ||||||
| 20 mm - 630 mm SDR 11 | ||||||
| 1" - 25" DR 13.6 | ||||||
| 25 mm - 630 mm DR 13.6 | ||||||
| 1 1/4" - 25" DR 16.2 | ||||||
| 32 mm - 630 mm DR 16.2 | ||||||
| 1 1/4" - 25" SDR 17 | ||||||
| 32 mm - 630 mm SDR 17 | ||||||
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe^ ¢ $$ +++ |
PEX 3106 |
HeatFlow PEX PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 6" SDR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe^ § $$ +++ |
PEX 5106 |
HeatFlow PEX PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 1" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe# ^ ¢ § $$ +++ |
PEX 5106 |
HeatFlow PEX PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 1" DR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
qualified through testing. Please verify that tubing certified against CSA B137.5 is
only marked with the following fitting system designation(s): ASTM F877, ASTM F2080,
ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe# ^ ¢ § $$ +++ |
PEX 3106 |
HeatFlow PEX PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 6" SDR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
qualified through testing. Please verify that tubing certified against CSA B137.5 is
only marked with the following fitting system designation(s): ASTM F877, ASTM F2080,
ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Tubing^ ¢ § $$ +++ |
PEX 3106 |
Pexgol PE-Xa Black |
ASTM F876/F877 |
|||
| 1/2" - 3" SDR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Tubing* ^ ¢ § $$ +++ |
PEX 3106 |
Pexgol PE-Xa Black |
ASTM F2788/F2788M |
|||
| 3" SDR 9 | ||||||
| 16 mm - 76 mm SDR 9 | ||||||
| 3" - 14" SDR 6 DR 6 | ||||||
| 16 mm - 355 mm DR 6 | ||||||
| 3" - 18" DR 7.4 | ||||||
| 16 mm - 450 mm DR 7.4 | ||||||
| 3" - 25" DR 9 | ||||||
| 16 mm - 630 mm DR 9 | ||||||
| 3" - 25" DR 11 | ||||||
| 20 mm - 630 mm DR 11 | ||||||
| 3" - 25" DR 13.6 | ||||||
| 25 mm - 630 mm DR 13.6 | ||||||
| 3" - 25" DR 16.2 | ||||||
| 32 mm - 630 mm DR 16.2 | ||||||
| 3" - 25" DR 17 | ||||||
| 32 mm - 630 mm DR 17 | ||||||
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe# ^ ¢ § $$ +++ |
PEX 5006 |
Pexgol PE-Xa Black |
CSA B137.5 |
|||
| 3/8" - 1" DR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
qualified through testing. Please verify that tubing certified against CSA B137.5 is
only marked with the following fitting system designation(s): ASTM F877, ASTM F2080,
ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe* ^ ¢ $$ +++ |
PEX 3106 |
Pexgol PE-Xa Natural |
ASTM F2788/F2788M |
|||
| 1/2" - 14" DR 6 | ||||||
| 16 mm - 355 mm DR 6 | ||||||
| 1/2" - 18" DR 7.4 | ||||||
| 16 mm - 450 mm DR 7.4 | ||||||
| 1/2" - 25" SDR 9 | ||||||
| 16 mm - 630 mm SDR 9 | ||||||
| 3/4" - 25" SDR 11 | ||||||
| 20 mm - 630 mm SDR 11 | ||||||
| 1" - 25" DR 13.6 | ||||||
| 25 mm - 630 mm DR 13.6 | ||||||
| 1 1/4" - 25" DR 16.2 | ||||||
| 32 mm - 630 mm DR 16.2 | ||||||
| 1 1/4" - 25" SDR 17 | ||||||
| 32 mm - 630 mm SDR 17 | ||||||
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe^ ¢ § $$ +++ |
PEX 3106 |
Pexgol PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 6" SDR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe^ § $$ +++ |
PEX 5106 |
Pexgol PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 1" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe# ^ ¢ § $$ +++ |
PEX 3106 |
Pexgol PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 6" SDR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
qualified through testing. Please verify that tubing certified against CSA B137.5 is
only marked with the following fitting system designation(s): ASTM F877, ASTM F2080,
ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe# ^ ¢ § $$ +++ |
PEX 5106 |
Pexgol PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 1" DR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
qualified through testing. Please verify that tubing certified against CSA B137.5 is
only marked with the following fitting system designation(s): ASTM F877, ASTM F2080,
ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe* ^ ¢ $$ +++ |
PEX 3106 |
Sioux Chief PE-Xa Natural |
ASTM F2788/F2788M |
|||
| 1/2" - 14" DR 6 | ||||||
| 16 mm - 355 mm DR 6 | ||||||
| 1/2" - 18" DR 7.4 | ||||||
| 16 mm - 450 mm DR 7.4 | ||||||
| 1/2" - 25" SDR 9 | ||||||
| 16 mm - 630 mm SDR 9 | ||||||
| 3/4" - 25" SDR 11 | ||||||
| 20 mm - 630 mm SDR 11 | ||||||
| 1" - 25" DR 13.6 | ||||||
| 25 mm - 630 mm DR 13.6 | ||||||
| 1 1/4" - 25" DR 16.2 | ||||||
| 32 mm - 630 mm DR 16.2 | ||||||
| 1 1/4" - 25" SDR 17 | ||||||
| 32 mm - 630 mm SDR 17 | ||||||
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe* ^ ¢ $$ +++ |
PEX 3106 |
Plumber Friendly PE-Xa Natural |
ASTM F2788/F2788M |
|||
| 1/2" - 14" DR 6 | ||||||
| 16 mm - 355 mm DR 6 | ||||||
| 1/2" - 18" DR 7.4 | ||||||
| 16 mm - 450 mm DR 7.4 | ||||||
| 1/2" - 25" SDR 9 | ||||||
| 16 mm - 630 mm SDR 9 | ||||||
| 3/4" - 25" SDR 11 | ||||||
| 20 mm - 630 mm SDR 11 | ||||||
| 1" - 25" DR 13.6 | ||||||
| 25 mm - 630 mm DR 13.6 | ||||||
| 1 1/4" - 25" DR 16.2 | ||||||
| 32 mm - 630 mm DR 16.2 | ||||||
| 1 1/4" - 25" SDR 17 | ||||||
| 32 mm - 630 mm SDR 17 | ||||||
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe^ ¢ § $$ +++ |
PEX 3106 |
Plumber Friendly PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 6" SDR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe^ § $$ +++ |
PEX 5106 |
Plumber Friendly PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 1" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe# ^ ¢ § $$ +++ |
PEX 3106 |
Plumber Friendly PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 6" SDR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
qualified through testing. Please verify that tubing certified against CSA B137.5 is
only marked with the following fitting system designation(s): ASTM F877, ASTM F2080,
ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe^ ¢ § $$ +++ |
PEX 3106 |
Sioux Chief PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 6" SDR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe# ^ ¢ § $$ +++ |
PEX 5106 |
Plumber Friendly PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 1" DR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
qualified through testing. Please verify that tubing certified against CSA B137.5 is
only marked with the following fitting system designation(s): ASTM F877, ASTM F2080,
ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe^ ¢ § $$ +++ |
PEX 3106 |
Slant/Fin Heating PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 6" SDR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe# ^ ¢ § $$ +++ |
PEX 3106 |
Sioux Chief PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 6" SDR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
qualified through testing. Please verify that tubing certified against CSA B137.5 is
only marked with the following fitting system designation(s): ASTM F877, ASTM F2080,
ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe^ § $$ +++ |
PEX 5106 |
Sioux Chief PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 1" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe# ^ ¢ § $$ +++ |
PEX 5106 |
Sioux Chief PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 1" DR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
qualified through testing. Please verify that tubing certified against CSA B137.5 is
only marked with the following fitting system designation(s): ASTM F877, ASTM F2080,
ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe^ § $$ +++ |
PEX 5106 |
Slant/FIN Heating PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 1" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe# ^ ¢ § $$ +++ |
PEX 3106 |
Slant/Fin Heating PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 6" SDR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
qualified through testing. Please verify that tubing certified against CSA B137.5 is
only marked with the following fitting system designation(s): ASTM F877, ASTM F2080,
ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe* ^ ¢ $$ +++ |
PEX 3106 |
Slant/Fin Heating PE-Xa Natural |
ASTM F2788/F2788M |
|||
| 1/2" - 14" DR 6 | ||||||
| 16 mm - 355 mm DR 6 | ||||||
| 1/2" - 18" DR 7.4 | ||||||
| 16 mm - 450 mm DR 7.4 | ||||||
| 1/2" - 25" SDR 9 | ||||||
| 16 mm - 630 mm SDR 9 | ||||||
| 3/4" - 25" SDR 11 | ||||||
| 20 mm - 630 mm SDR 11 | ||||||
| 1" - 25" DR 13.6 | ||||||
| 25 mm - 630 mm DR 16.2 | ||||||
| 1 1/4" - 25" DR 16.2 | ||||||
| 32 mm - 630 mm DR 16.2 | ||||||
| 1 1/4" - 25" SDR 17 | ||||||
| 32 mm - 630 mm SDR 17 | ||||||
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe^ ¢ § $$ +++ |
PEX 3106 |
Slant/Fin Plumbing PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 6" SDR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe* ^ ¢ $$ +++ |
PEX 3106 |
Slant/Fin Plumbing PE-Xa Natural |
ASTM F2788/F2788M |
|||
| 1/2" - 14" DR 6 | ||||||
| 16 mm - 355 mm DR 6 | ||||||
| 1/2" - 18" DR 7.4 | ||||||
| 16 mm - 450 mm DR 7.4 | ||||||
| 1/2" - 25" SDR 9 | ||||||
| 16 mm - 630 mm SDR 9 | ||||||
| 3/4" - 25" SDR 11 | ||||||
| 20 mm - 630 mm SDR 11 | ||||||
| 1" - 25" DR 13.6 | ||||||
| 25 mm - 630 mm DR 13.6 | ||||||
| 1 1/4" - 25" DR 16.2 | ||||||
| 32 mm - 630 mm DR 16.2 | ||||||
| 1 1/4" - 25" SDR 17 | ||||||
| 32 mm - 630 mm SDR 17 | ||||||
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe^ § $$ +++ |
PEX 5106 |
Slant/FIN Plumbing PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 1" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe# ^ ¢ § $$ +++ |
PEX 5106 |
Slant/FIN Plumbing PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 1" DR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
qualified through testing. Please verify that tubing certified against CSA B137.5 is
only marked with the following fitting system designation(s): ASTM F877, ASTM F2080,
ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe# ^ ¢ § $$ +++ |
PEX 3106 |
Slant/Fin Plumbing PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 6" SDR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
qualified through testing. Please verify that tubing certified against CSA B137.5 is
only marked with the following fitting system designation(s): ASTM F877, ASTM F2080,
ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe^ ¢ § $$ +++ |
PEX 3106 |
Terratherma PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 6" SDR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe* ^ ¢ $$ +++ |
PEX 3106 |
Terratherma PE-Xa Natural |
ASTM F2788/F2788M |
|||
| 1/2" - 14" DR 6 | ||||||
| 16 mm - 355 mm DR 6 | ||||||
| 1/2" - 18" DR 7.4 | ||||||
| 16 mm - 450 mm DR 7.4 | ||||||
| 1/2" - 25" SDR 9 | ||||||
| 16 mm - 630 mm SDR 9 | ||||||
| 3/4" - 25" SDR 11 | ||||||
| 20 mm - 630 mm SDR 11 | ||||||
| 1" - 25" DR 13.6 | ||||||
| 25 mm - 630 mm DR 13.6 | ||||||
| 1 1/4" - 25" DR 16.2 | ||||||
| 32 mm - 630 mm DR 16.2 | ||||||
| 1 1/4" - 25" SDR 17 | ||||||
| 32 mm - 630 mm SDR 17 | ||||||
* Barrier Pipes only Certified up to 160mm (6").
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe^ § $$ +++ |
PEX 5106 |
Terratherma PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 1" DR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe# ^ ¢ § $$ +++ |
PEX 5106 |
Terratherma PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 1" DR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
qualified through testing. Please verify that tubing certified against CSA B137.5 is
only marked with the following fitting system designation(s): ASTM F877, ASTM F2080,
ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Pipe# ^ ¢ § $$ +++ |
PEX 3106 |
Terratherma PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 6" SDR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
qualified through testing. Please verify that tubing certified against CSA B137.5 is
only marked with the following fitting system designation(s): ASTM F877, ASTM F2080,
ASTM F1960.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
$$ These products may also be produced with a clear, blue, orange, red, or white barrier
material on the outer layer of the tubing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Radiant Floor Heating
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe¢ § $$ |
PEX 3106 |
Sioux Chief PEX PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 6" SDR 9 | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe# ¢ § $$ |
PEX 3106 |
Sioux Chief PEX PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 6" SDR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F877, ASTM F2080, ASTM F1960. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe¢ § $$ |
PEX 3106 |
Slant/Fin Heating PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 6" SDR 9 | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe# ¢ § $$ |
PEX 3106 |
Slant/Fin Heating PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 6" SDR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F877, ASTM F2080, ASTM F1960. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe¢ § $$ |
PEX 3106 |
Slant/Fin Plumbing PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 6" SDR 9 | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe# ¢ § $$ |
PEX 3106 |
Slant/Fin Plumbing PE-Xa Natural |
CSA B137.5 |
|||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F877, ASTM F2080, ASTM F1960. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe¢ § $$ |
PEX 3106 |
Pexgol PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 6" SDR 9 | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe# ¢ § $$ |
PEX 3106 |
Pexgol PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 6" SDR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F877, ASTM F2080, ASTM F1960. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe¢ § $$ |
PEX 3106 |
Terratherma PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 6" SDR 9 | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe# ¢ § $$ |
PEX 3106 |
Terratherma PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 6" SDR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F877, ASTM F2080, ASTM F1960. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe¢ § $$ |
PEX 3106 |
AquaSeal PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 6" SDR 9 | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe# ¢ § $$ |
PEX 3106 |
AquaSeal PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 6" SDR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F877, ASTM F2080, ASTM F1960. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe¢ § $$ |
PEX 3106 |
AquaHeat PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 6" SDR 9 | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe# ¢ § $$ |
PEX 3106 |
AquaHeat PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 6" SDR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F877, ASTM F2080, ASTM F1960. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe¢ § $$ |
PEX 3106 |
Plumber Friendly PE-Xa Natural |
ASTM F876/F877 |
|||
| 3/8" - 6" SDR 9 | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
Pipe# ¢ § $$ |
PEX 3106 |
Plumber Friendly PE-Xa Natural |
CSA B137.5 |
|||
| 3/8" - 6" SDR 9 | ||||||
# Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F877, ASTM F2080, ASTM F1960. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. $$ These products may also be produced with a clear, blue, orange or red barrier material on the outer layer of the tubing. |
||||||
! Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be qualified through testing. Please verify that tubing certified against CSA B137.5 is only marked with the following fitting system designation(s): ASTM F2080, ASTM F1960. & This is a 5 layer construction pipe (PEX-adhesive-EVOH-adhesive-PEX). This product is produced in red, blue, black and natural.
Number of matching Manufacturers is 1
Number of matching Products is 263
Processing time was 0 seconds
