NSF Product and Service Listings
These NSF Official Listings are current as of Thursday, January 15, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?Company=0H060&Standard=014&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| WL Plastics Corporation |  |
| 3575 Lone Star Circle | |
| Suite 300 | |
| Fort Worth, TX 76177 | |
| United States | |
| 682-831-2727 | |
| Visit this company's website |
Facility : # 2 Lubbock, TX
Gas Applications - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe§ |
PE 2708 |
WL Plastics LBB/WLP LBB |
ASTM D2513 |
|||
| 1/2" CTS 0.090 WALL | ||||||
| 3/4" CTS 0.090 WALL | ||||||
| 1" CTS 0.090 WALL, 0.099 WALL, 0.101 WALL | ||||||
| 1-1/4" CTS 0.062 WALL, 0.090 WALL, 0.121 WALL SDR 9.3 | ||||||
| 1/2" IPS SDR 9, 9.3, 9.33, 11 | ||||||
| 3/4" IPS SDR 11 | ||||||
| 1" IPS SDR 10, 11 | ||||||
| 1-1/4" IPS SDR 10, 11 | ||||||
| 1-1/2" IPS SDR 11 | ||||||
| 2" IPS SDR 11, 11.5, 13.5 | ||||||
| 3" IPS SDR 9, 11, 11.5, 13.5 | ||||||
| 4" IPS SDR 9, 11, 11.5, 13.5, 17 | ||||||
| 6" IPS SDR 9, 11, 11.5, 13.5, 17 | ||||||
| 8" IPS SDR 9, 11, 11.5, 13.5, 17 | ||||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe§ |
PE 4710 |
WL Plastics LBB/WLP LBB |
ASTM D2513 |
|||
| 1/2" CTS 0.090 WALL | ||||||
| 3/4" CTS 0.090 WALL | ||||||
| 1" CTS 0.090 WALL, 0.099 WALL, 0.101 WALL, 0.121 W | ||||||
| 1-1/4" CTS 0.090 WALL, 0.121 WALL | ||||||
| 3/4" IPS SDR 7.3, 9, 11 | ||||||
| 1" IPS SDR 7, 7.3, 9, 11 | ||||||
| 1-1/4" IPS SDR 7, 7.3, 9, 10, 11 | ||||||
| 1-1/2" IPS SDR 7, 7.3, 9, 11 | ||||||
| 2" IPS SDR 7, 7.3, 9, 11, 13.5, 15.5, 17 | ||||||
| 3" IPS SDR 7, 7.3, 9, 11, 11.5, 13.5, 15.5, 17 | ||||||
| 4" IPS SDR 7, 7.3, 9, 11, 11.5, 13.5, 15.5, 17 | ||||||
| 6" IPS SDR 7, 7.3, 9, 11, 11.5, 13.5, 15.5, 17 | ||||||
| 8" IPS SDR 7, 7.3, 9, 11, 11.5, 13.5, 15.5, 17 | ||||||
| 10" IPS SDR 7, 9, 11, 13.5, 15.5, 17 | ||||||
| 12" IPS SDR 7, 9, 11, 13.5, 15.5, 17 | ||||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Facility : Elizabethtown, KY
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ [G] |
PE 4710 |
WL Plastics KY / WLP KY |
ASTM D3035 |
|||
| 1/2" DR 7[1] | ||||||
|
3/4" - 3" DR 7 |
||||||
| 1/2" DR 9[1] | ||||||
|
3/4" - 3" DR 9 |
||||||
| 1/2" - 3" DR 11[1] | ||||||
|
1/2" - 3" DR 13.5[1] |
||||||
|
3/4" - 3" DR 15.5[1] |
||||||
|
3/4" - 3" DR 17[1] |
||||||
|
1" - 3" DR 21[1] |
||||||
|
1" - 3" DR 26[1] |
||||||
|
1 1/2" - 3" DR 32.5[1] |
||||||
[1] These pipe sizes are not certified for use in potable water applications containing
oxidizing disinfectants and shall not be marked with a CC oxidative resistance
classification.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ [1] [G] |
PE 4710 |
WL Plastics KY / WLP KY |
AWWA C901 |
|||
| 3/4" - 3" IPS SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] These pipe sizes are not certified for use in potable water applications containing
oxidizing disinfectants and shall not be marked with a CC oxidative resistance
classification.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe* + [G] |
PE 4710 |
WL Plastics KY / WLP KY |
AWWA C906 |
|||
| 4" - 26" IPS DR 7 | ||||||
| 4" - 28" IPS DR 7.3[2] | ||||||
|
4" - 36" IPS DR 9[2] |
||||||
|
4" - 42 IPS DR 11 |
||||||
| 4" - 48" IPS DR 13.5 | ||||||
| 4" - 54" IPS DR 15.5[2] | ||||||
|
4" - 54" IPS DR 17 |
||||||
| 4" - 54" IPS DR 21 | ||||||
| 4" - 54" IPS DR 26[2] | ||||||
|
4" - 54" IPS DR 32.5[2] |
||||||
[2] Special sizes may be acceptable for engineered applications, due to system conditions
or special local requirements. It is the responsibility of the end user to ensure the
product is suitable for the intended application.
* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ [G] |
PE 4710 |
WL Plastics KY / WLP KY |
ASTM F714 |
|||
| 4" - 18" IPS DR 7.3 | ||||||
| 4" - 26" IPS DR 7 | ||||||
| 4" - 36" IPS DR 9 | ||||||
| 4" - 42" IPS DR 11 | ||||||
| 4" - 48" IPS DR 13.5 | ||||||
| 4" - 54" IPS DR 15.5[2] | ||||||
|
4" - 54" IPS DR 17 |
||||||
| 4" - 54" IPS DR 21 | ||||||
| 4" - 54" IPS DR 26 | ||||||
| 4" - 54" IPS DR 32.5 | ||||||
| 4" - 54" IPS DR 41 | ||||||
[2] Special sizes may be acceptable for engineered applications, due to system conditions
or special local requirements. It is the responsibility of the end user to ensure the
product is suitable for the intended application.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Titusville, PA
Gas Applications - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe§ |
PE 2708 |
WL Plastics PA/WLP PA |
ASTM D2513 |
|||
| 1/2" CTS 0.090 WALL | ||||||
| 3/4" CTS 0.090 WALL | ||||||
| 1” CTS 0.090 WALL, 0.099 WALL, 0.101 WALL | ||||||
| 1-1/4” CTS 0.062 WALL, 0.090 WALL, 0.121 WALL SDR 9.3 | ||||||
| 1/2" IPS SDR 9, 9.3, 9.33, 11 SDR 11 | ||||||
| 3/4" IPS SDR 11 SDR 11 | ||||||
| 1” IPS SDR 11 SDR 10, 11 | ||||||
| 1-1/4” IPS SDR 10, 11 SDR 11 | ||||||
| 1-1/2" IPS SDR 11 SDR 11 | ||||||
| 2” IPS SDR 11, 13.5 SDR 11, 11.5 | ||||||
| 3” IPS SDR 9, 11, 11.5, 13.5 SDR 11, 11.5, 13.5 | ||||||
| 4” IPS SDR 9, 11, 11.5, 13.5, 17 SDR 11, 11.5, 13.5 | ||||||
| 6” IPS SDR 9, 11, 11.5, 13.5, 17 SDR 11, 11.5, 13.5 | ||||||
| 8” IPS SDR 9, 11, 11.5, 13.5, 17 SDR 11, 11.5, 13.5 | ||||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe§ |
PE 4710 |
WL Plastics PA/WLP PA |
ASTM D2513 |
|||
| 1/2" CTS 0.090 WALL | ||||||
| 3/4" CTS 0.090 WALL | ||||||
| 1” CTS 0.090 WALL, 0.099 WALL, 0.101 WALL, 0.121 WALL | ||||||
| 1-1/4” CTS 0.090 WALL, 0.121 WALL | ||||||
| 3/4" IPS SDR 7.3, 9, 11 SDR 7.3, 9, 11 | ||||||
| 1” IPS SDR 7, 7.3, 9, 11 SDR 7.3, 9, 11 | ||||||
| 1-1/4” IPS SDR 7, 7.3, 9, 10, 11 SDR 7.3, 9, 11 | ||||||
| 1-1/2" IPS SDR 7, 7.3, 9, 11 SDR 7.3, 9, 11 | ||||||
| 2” IPS SDR 7, 7.3, 9, 11, 13.5, 15.5, 17 SDR 7.3, 9, 11, 13.5, 15.5, 17 | ||||||
| 3” IPS SDR 7, 7.3, 9, 11, 11.5, 13.5, 15.5, 17 SDR 7.3, 9, 11, 13.5, 15.5, 17 | ||||||
| 4” IPS SDR 7, 7.3, 9, 11, 11.5, 13.5, 15.5, 17 SDR 7.3, 9, 11, 13.5, 15.5, 17 | ||||||
| 6” IPS SDR 7, 7.3, 9, 11, 11.5, 13.5, 15.5, 17 SDR 9, 11, 13.5, 15.5, 17 | ||||||
| 8” IPS SDR 7, 7.3, 9, 11, 11.5, 13.5, 15.5, 17 SDR 11, 13.5, 15.5, 17 | ||||||
| 10” IPS SDR 7, 9, 11, 13,5, 15.5, 17 SDR 13.5, 15.5, 17 | ||||||
| 12” IPS SDR 7, 9, 11, 13.5, 15.5, 17 SDR 15.5, 17 | ||||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe¢ |
PE 2708 |
WL Plastics PA/WLP PA |
CSA B137.4 |
|||
| 1/2" CTS .090 wall | ||||||
| 1" CTS .099 wall | ||||||
| 1 1/4" SDR 10 | ||||||
| 3/4" - 2" SDR 11 | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
||||||
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ |
PE 4710 |
WL Plastics PA/WLP PA |
ASTM D2239 |
|||
| 3/4" - 2" SIDR 5.3 | ||||||
| 3/4" - 2" SIDR 7 | ||||||
| 3/4" - 2" SIDR 9 | ||||||
| 1/2" - 3" SIDR 11.5[1] | ||||||
|
3/4" - 3" SIDR 15[1] |
||||||
|
1/2" - 2" SIDR 19[1] |
||||||
[1] These pipe sizes are not certified for use in potable water applications containing
oxidizing disinfectants and shall not be marked with a CC oxidative resistance
classification.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
Pipe+ |
PE 4710 |
WL Plastics PA/WLP PA |
ASTM D3035 |
|||
| 1/2" DR 7[1] | ||||||
|
3/4" - 3" DR 7 |
||||||
| 1/2" DR 9[1] | ||||||
|
3/4" - 3" DR 9 |
||||||
| 1/2" - 3" DR 11[1] | ||||||
|
1/2" - 3" DR 13.5[1] |
||||||
|
3/4" - 3" DR 15.5[1] |
||||||
|
3/4" - 3" DR 17[1] |
||||||
|
1" - 3" DR 21[1] |
||||||
|
1" - 3" DR 26[1] |
||||||
|
1 1/2" - 3" DR 32.5[1] |
||||||
[1] These pipe sizes are not certified for use in potable water applications containing
oxidizing disinfectants and shall not be marked with a CC oxidative resistance
classification.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
Pipe+ |
PE 4710 |
WL Plastics PA/WLP PA |
ASTM D2737 |
|||
| 3/4" - 2" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
Pipe+ |
PE 4710 |
WL Plastics PA/WLP PA |
ASTM F714 |
|||
| 4" - 18" IPS DR 7.3 | ||||||
| 4" - 26" IPS DR 7 | ||||||
| 4" - 36" IPS DR 9 | ||||||
| 4" - 42" IPS DR 11 | ||||||
| 4" - 48" IPS DR 13.5 | ||||||
| 4" - 54" IPS DR 15.5[2] | ||||||
|
4" - 54" IPS DR 17 |
||||||
| 4" - 54" IPS DR 21 | ||||||
| 4" - 54" IPS DR 26 | ||||||
| 4" - 54" IPS DR 32.5 | ||||||
| 4" - 54" IPS DR 41 | ||||||
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the
end user to ensure the product is suitable for the intended application.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
Pipe+ |
PE 4710 |
WL Plastics PA/WLP PA |
AWWA C901 |
|||
| 3/4" - 3" IPS SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
Pipe+ |
PE 3608/4710 |
WL Plastics PA/WLP PA Blue |
ASTM D2239 |
|||
| 3/4" - 2" SIDR 5.3 | ||||||
| 3/4" - 2" SIDR 7 | ||||||
| 3/4" - 2" SIDR 9 | ||||||
| 1/2" - 3" SIDR 11.5[1] | ||||||
|
3/4" - 3" SIDR 15[1] |
||||||
|
1/2" - 2" SIDR 19[1] |
||||||
[1] These pipe sizes are not certified for use in potable water applications containing
oxidizing disinfectants and shall not be marked with a CC oxidative resistance
classification.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
Pipe+ |
PE 4710 |
WL Plastics PA/WLP PA Blue |
ASTM D3035 |
|||
| 1/2" DR 7[1] | ||||||
|
3/4" - 3" DR 7 |
||||||
| 1/2" DR 9[1] | ||||||
|
3/4" - 3" DR 9 |
||||||
| 1/2" - 3" DR 11[1] | ||||||
|
1/2" - 3" DR 13.5[1] |
||||||
|
3/4" - 3" DR 15.5[1] |
||||||
|
3/4" - 3" DR 17[1] |
||||||
|
1" - 3" DR 21[1] |
||||||
|
1" - 3" DR 26[1] |
||||||
|
1 1/2" - 3" DR 32.5[1] |
||||||
[1] These pipe sizes are not certified for use in potable water applications containing
oxidizing disinfectants and shall not be marked with a CC oxidative resistance
classification.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
Pipe+ |
PE 4710 |
WL Plastics PA/WLP PA Blue |
ASTM D2737 |
|||
| 3/4" - 2" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
Pipe+ |
PE 4710 |
WL Plastics PA/WLP PA Blue |
ASTM F714 |
|||
| 4" - 18" IPS DR 7.3 | ||||||
| 4" - 26" IPS DR 7 | ||||||
| 4" - 36" IPS DR 9 | ||||||
| 4" - 42" IPS DR 11 | ||||||
| 4" - 48" IPS DR 13.5 | ||||||
| 4" - 54" IPS DR 15.5[2] | ||||||
|
4" - 54" IPS DR 17 |
||||||
| 4" - 54" IPS DR 21 | ||||||
| 4" - 54" IPS DR 26 | ||||||
| 4" - 54" IPS DR 32.5 | ||||||
| 4" - 54" IPS DR 41 | ||||||
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the
end user to ensure the product is suitable for the intended application.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
Pipe+ |
PE 4710 |
WL Plastics PA/WLP PA Blue |
AWWA C901 |
|||
| 3/4" - 3" IPS SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
Pipe* + |
PE 4710 |
WL Plastics PA/WLP PA |
AWWA C906 |
|||
| 4" - 24" IPS DR 7 | ||||||
| 4" - 24" IPS DR 7.3[2] | ||||||
|
4" - 24" IPS DR 9 |
||||||
| 4" - 24" IPS DR 11 | ||||||
| 4" - 24" IPS DR 13.5 | ||||||
| 4" - 24" IPS DR 15.5[2] | ||||||
|
4" - 24" IPS DR 17 |
||||||
| 4" - 24" IPS DR 21 | ||||||
| 4" - 24" IPS DR 26[2] | ||||||
|
4" - 24" IPS DR 32.5[2] |
||||||
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the
end user to ensure the product is suitable for the intended application.
* Product tested and Certified for Cold 23°C (73°F) applications only. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
Facility : Rapid City, SD
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ [G] |
PE 4710 |
WL Plastics SD / WLP SD |
AWWA C901 |
|||
| 3/4" - 3" IPS SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe* + [G] |
PE 4710 |
WL Plastics SD / WLP SD |
AWWA C906 |
|||
| 4" - 26" IPS DR 7 | ||||||
| 4" - 28" IPS DR 7.3[2] | ||||||
|
4" - 36" IPS DR 9[2] |
||||||
|
4" - 42" IPS DR 11 |
||||||
| 4" - 48" IPS DR 13.5 | ||||||
| 4" - 54" IPS DR 15.5[2] | ||||||
|
4" - 54" IPS DR 17 |
||||||
| 4" - 54" IPS DR 21 | ||||||
| 4" - 54" IPS DR 26[2] | ||||||
|
4" - 54" IPS DR 32.5[2] |
||||||
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure the
product is suitable for the intended application.
* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ [G] |
PE 4710 |
WL Plastics SD / WLP SD |
ASTM D3035 |
|||
| 1/2" DR 7[1] | ||||||
|
3/4" - 3" DR 7 |
||||||
| 1/2" DR 9[1] | ||||||
|
3/4" - 3" DR 9 |
||||||
| 1/2" - 3" DR 11[1] | ||||||
|
1/2" - 3" DR 13.5[1] |
||||||
|
3/4" - 3" DR 15.5[1] |
||||||
|
3/4" - 3" DR 17[1] |
||||||
|
1" - 3" DR 21[1] |
||||||
|
1" - 3" DR 26[1] |
||||||
|
1 1/2" - 3" DR 32.5[1] |
||||||
[1] These pipe sizes are not certified for use in potable water applications containing
oxidizing disinfectants and shall not be marked with a CC oxidative resistance
classification.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ [G] |
PE 4710 |
WL Plastics SD / WLP SD |
ASTM F714 |
|||
| 4" - 18" IPS DR 7.3 | ||||||
| 4" - 26" IPS DR 7 | ||||||
| 4" - 36" IPS DR 9 | ||||||
| 4" - 42" IPS DR 11 | ||||||
| 4" - 48" IPS DR 13.5 | ||||||
| 4" - 54" IPS DR 15.5[2] | ||||||
|
4" - 54" IPS DR 17 |
||||||
| 4" - 54" IPS DR 21 | ||||||
| 4" - 54" IPS DR 26 | ||||||
| 4" - 54" IPS DR 32.5 | ||||||
| 4" - 54" IPS DR 41 | ||||||
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure the
product is suitable for the intended application.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Cedar City, UT
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ [G] |
PE 4710 |
WL Plastics UT / WLP UT |
ASTM D3035 |
|||
| 1/2" DR 7[1] | ||||||
|
3/4" - 3" DR 7 |
||||||
| 1/2" DR 9[1] | ||||||
|
3/4" - 3" DR 9 |
||||||
| 1/2" - 3" DR 11[1] | ||||||
|
1/2" - 3" DR 13.5[1] |
||||||
|
3/4" - 3" DR 15.5[1] |
||||||
|
3/4" - 3" DR 17[1] |
||||||
|
1" - 3" DR 21[1] |
||||||
|
1 1/2" - 3" DR 32.5[1] |
||||||
[1] These pipe sizes are not certified for use in potable water applications containing
oxidizing disinfectants and shall not be marked with a CC oxidative resistance
classification.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ [G] |
PE 4710 |
WL Plastics UT / WLP UT |
AWWA C901 |
|||
| 3/4" - 3" IPS SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe* + [G] |
PE 4710 |
WL Plastics UT / WLP UT |
AWWA C906 |
|||
| 4" - 26" IPS DR 7 | ||||||
| 4" - 28" IPS DR 7.3[2] | ||||||
|
4" - 36" IPS DR 9[2] |
||||||
|
4" - 42 IPS DR 11 |
||||||
| 4" - 48" IPS DR 13.5 | ||||||
| 4" - 54" IPS DR 15.5[2] | ||||||
|
4" - 54" IPS DR 17 |
||||||
| 4" - 54" IPS DR 21 | ||||||
| 4" - 54" IPS DR 26[2] | ||||||
|
4" - 54" IPS DR 32.5[2] |
||||||
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure the
product is suitable for the intended application.
* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ [G] |
PE 4710 |
WL Plastics UT / WLP UT |
ASTM F714 |
|||
| 4" - 18" IPS DR 7.3 | ||||||
| 4" - 26" IPS DR 7 | ||||||
| 4" - 36" IPS DR 9 | ||||||
| 4" - 42" IPS DR 11 | ||||||
| 4" - 48" IPS DR 13.5 | ||||||
| 4" - 54" IPS DR 15.5[2] | ||||||
|
4" - 54" IPS DR 17 |
||||||
| 4" - 54" IPS DR 21 | ||||||
| 4" - 54" IPS DR 26 | ||||||
| 4" - 54" IPS DR 32.5 | ||||||
| 4" - 54" IPS DR 41 | ||||||
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure the
product is suitable for the intended application.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Number of matching Manufacturers is 1
Number of matching Products is 230
Processing time was 0 seconds
