NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, January 15, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?Company=14680&Standard=014&

Did you know?

The new NSF Product Listings website is available for NSF/ANSI 14-Certified products with a new look and feel. Click on "Try it Now" to check it out!
NSF/ANSI 14
Plastics Piping System Components and Related Materials

Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document


 
Durman Esquivel S.A. 
Zona Franca Propark
Contiguo a La Dos Pinos 
El Coyol De Alajuela,  
Costa Rica 
506-436-4700

Facility : # 1 San Jose, Costa Rica

Joining Materials

Product Type General Material   For Use With Trade Name Product Standard
Solvent Cement+++ [1] [2] CPVC PW CPVC FlowGuard Gold Low VOC Solvent Cement ASTM F493
Solvent Cement+++ [1] [2] CPVC PW CPVC Solvent Cement Durman Rise ASTM F493
Solvent Cement+++ [1] [2] CPVC PW WHITE CPVC FlowGuard Gold Solvent Cement ASTM F493
Solvent Cement+ [1] [2] PVC PW Durman Wet Bonding PVC Solvent Cement ASTM D2564
Solvent Cement+ [1] PVC PW PVC Solvent Cement Gray Low VOC ASTM D2564
Solvent Cement+ [1] PVC PW PVC Solvent Cement Heavy Bodied ASTM D2564
Solvent Cement+ [1] [2] PVC PW PVC Solvent Cement Medium Bodied ASTM D2564
Solvent Cement+ [1] [2] PVC PW PVC Solvent Cement Regular Bodied ASTM D2564
Solvent Cement+ [1] PVC PW PVC Solvent Cement TP12 ASTM D2564
Solvent Cement+ [1] PVC PW PVC Solvent Cement Transparent Low VOC ASTM D2564
Solvent Cement+ [1] [2] PVC PW PVC Solvent Cement BP ASTM D2564
Solvent Cement+ [1] [2] PVC PW PVC Solvent Cement TP6 ASTM D2564 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[2] Certified for use without primer.


* Certified color is transparent.

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe* +		  
PVC		  
DURECO		  
AWWA C900
4" - 12" 

* Sockets and gasketed bell ends are not tested or Listed by NSF for this
   production facility.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Pipe* +		  
PVC		  
DURECO		  
ASTM D1785
1/2" - 6" Sch 40
1/2" - 1 1/2" Sch 80 

* Sockets and gasketed bell ends are not tested or Listed by NSF for this
   production facility.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Pipe* +		  
PVC		  
DURECO		  
ASTM D2241
1/2" - 6" SDR 13.5
3/4" - 18" SDR 17
3/4" - 18" SDR 21
1" - 18" SDR 26
1 1/4" - 18" SDR 32.5
3" - 18" SDR 41
4" - 12" SDR 64 

* Sockets and gasketed bell ends are not tested or Listed by NSF for this
   production facility.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Fittings+ [G]		  
PVC		  
DURMAN		  
ASTM D2466

45° Elbow (Slip x Slip)(240)
1/2" - 6"  

90° Elbow (Slip x Slip)(232)
1/2" - 6"  

Cap (FPT)(296)
1/2" - 6"  

Cap (Slip)(258)
1/2" - 6"  

Combination & Reducing Tee(Slip x Slip x FPT)(256)
1" x 1" x 1/2"   1 1/2" x 1 1/2" x 1/2"   2" x 2" x 1/2"  

Combination 90° Elbow (Slip x FPT)(248)
1/2" - 3"  

Combination Tee (Slip x Slip x FPT)(256)
1/2" - 2"  

Coupling (FPT x FPT)(237)
1/2" x 1/2"   3/4" x 3/4"  

Coupling (Slip x Slip)(230)
1/2" - 6"  

Female Adapter (Slip x FPT)(236)
1/2" - 6"  

Male Adapter (Slip x MPT)(238)
1/2" - 6"  

Plug (MPT)(206)
1/2" - 4"  

Reducer Bushing (Slip x Slip)(231)
3/4" x 1/2"   1" x 1/2"   1" x 3/4"   1 1/4" x 1/2"  
1 1/4" x 3/4"   1 1/4" x 1"   1 1/2" x 1/2"   1 1/2" x 3/4"  
1 1/2" x 1"   1 1/2" x 1 1/4"   2" x 1/2"   2" x 3/4"  
2" X 1"   2" x 1 1/4"   2" x 1 1/2"   2 1/2" x 2"  
3" x 3/4"   3" x 1"   3" x 1 1/2"   3" x 2"  
3" x 2 1/2"   4" x 2"   4" x 3"   6" x 4"  

Reducing Tee (Slip x Slip x Slip)(276)
3/4" x 3/4" x 1/2"   1" x 1" x 1/2"   1" x 1" x 3/4"   1 1/2" x 1 1/2" x 1/2"  
1 1/2" x 1 1/2" x 1"   2" x 2" x 1/2"   2" x 2" x 3/4"  

Tee (Slip x Slip x Slip)(234)
1/2" - 6"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Pipe* +		  
PVC		  
DURMAN		  
AWWA C900
4" - 12" 

* Sockets and gasketed bell ends are not tested or Listed by NSF for this
   production facility.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Pipe* +		  
PVC		  
DURMAN		  
ASTM D1785
1/2" - 6" Sch 40
1/2" - 1 1/2" Sch 80 

* Sockets and gasketed bell ends are not tested or Listed by NSF for this
   production facility.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Pipe* +		  
PVC		  
DURMAN		  
ASTM D2241
1/2" - 6" SDR 13.5
3/4" - 18" SDR 17
3/4" - 18" SDR 21
1" - 18" SDR 26
1 1/4" - 18" SDR 32.5
3" - 18" SDR 41
4" - 12" SDR 64 

* Sockets and gasketed bell ends are not tested or Listed by NSF for this
   production facility.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Fittings+++ [1]		  
CPVC		  
Durman FlowGuard		  
ASTM D2846

45° Elbow (Slip)
12 mm (1/2") - (2030684)   18 mm (3/4") - (2030686)   25 mm (1") - (2030688)  

90° Elbow (Slip)
12 mm (1/2") - (2030683)   18 mm (3/4") - (2030685)   25 mm (1") - (2030687)  

Coupling (Slip)
12 mm (1/2") - (2030705)   18 mm (3/4") - (2030706)   25 mm (1") - (2030707)  

Plug Female
12 mm (1/2") - (2030696)   18 mm (3/4") - (2030697)   25 mm (1") - (2030698)  

Tee (Slip)
12 mm (1/2") - (2030699)   18 mm (3/4") - (2030700)   25 mm (1") - (2030701)   

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] This product may be marked with an alternate trade name: NICOLL.

Fittings+++ [1]		  
CPVC 4120		  
Durman Flow Guard Gold		  
ASTM D2846

45° Elbow (slip x slip)
1/2" - 2"  

90° Combination Elbow with Ears (slip x FPT)
1/2"  

90° Elbow (slip x slip)
1/2" - 2"  

Cap (slip)
1/2" - 2"  

Coupling (slip x slip)
1/2" - 2"  

Cross Tee (slip x slip x slip x slip)
1/2"  

Female Adapter (slip x FPT)
1/2" - 3/4"  

Male Adapter (slip x MPT)
1/2" - 3/4"  

Reducer Bushing (slip x slip)
1" x 3/4"   3/4" x 1/2"  

Reducing Tee (slip x slip x slip)
3/4" x 1/2" x 1/2"   3/4" x 3/4" x 1/2"   3/4" x 1/2" x 3/4"  

Tee (slip x slip x slip)
1/2" - 2"   

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] This product may be marked with an alternate trade name: NICOLL.

Pipe* +++		  
CPVC 4120		  
Durman Flowguard Gold Potable Water Tubing		  
ASTM D2846
1/2" - 2" SDR 11 

* Sockets and gasketed bell ends are not tested or Listed by NSF for this
   production facility.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe* +++		  
CPVC 4120		  
FlowGuard		  
ASTM D2846
1/2" - 2" SDR 11 

* Sockets and gasketed bell ends are not tested or Listed by NSF for this
   production facility.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe+++		  
CPVC 4120		  
FlowGuard Gold™ EcoTec		  
SE 8225
1/2" - 2" 

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings+ [G]		  
PVC		  
IPEX		  
ASTM D2466

45° Elbow (Slip x Slip)(240)
1/2" - 6"  

90° Elbow (Slip x Slip)(232)
1/2" - 6"  

Cap (FPT)(296)
1/2" - 6"  

Cap (Slip)(258)
1/2" - 6"  

Combination & Reducing Tee (Slip Slip x FPT)(256)
1" x 1" x 1/2"   1 1/2" x 1 1/2" x 1/2"   2" x 2" x 1/2"  

Combination 90° Elbow (Slip x FPT)(248)
1/2" - 3"  

Combination Tee (Slip x Slip x FPT)(256)
1/2" - 2"  

Coupling (FPT x FPT)(237)
1/2" x 1/2"   3/4" x 3/4"  

Coupling (Slip x Slip)(230)
1/2" - 6"  

Female Adapter (Slip x FPT)(236)
1/2" - 6"  

Male Adapter (Slip x MPT)(238)
1/2" - 6"  

Plug (MPT)(206)
1/2" - 4"  

Reducer Bushing (Slip x Slip)(231)
3/4" x 1/2"   1" x 1/2"   1" x 3/4"   1 1/4" x 1/2"  
1 1/4" x 3/4"   1 1/4" x 1"   1 1/2" x 1/2"   1 1/2" x 3/4"  
1 1/2" x 1"   1 1/2" x 1 1/4"   2" x 1/2"   2" x 3/4"  
2" x 1"   2" x 1 1/4"   2" x 1 1/2"   2 1/2" x 2"  
3" x 3/4"   3" x 1"   3" x 1 1/2"   3" x 2"  
3" x 2 1/2"   4" x 2"   4" x 3"   6" x 4"  

Reducing Tee (Slip x Slip x Slip)(276)
3/4" x 3/4" x 1/2"   1" x 1" x 1/2"   1" x 1" x 3/4"   1 1/2" x 1 1/2" x 1/2"  
1 1/2" x 1 1/2" x 1"   2" x 2" x 1/2"   2" x 2" x 3/4"  

Tee (Slip x Slip x Slip)(234)
1/2" - 6"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Pipe* +++		  
CPVC 4120		  
Nicoll Flowguard Gold		  
ASTM D2846
1/2" - 2" SDR 11 

* Sockets and gasketed bell ends are not tested or Listed by NSF for this
   production facility.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Number of matching Manufacturers is 1
Number of matching Products is 159
Processing time was 0 seconds