NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, July 17, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?Company=21250&Standard=014&

NSF/ANSI 14
Plastics Piping System Components and Related Materials

Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document

Georg Fischer LLC
9271 Jeronimo Road
Irvine, CA 92618
United States
610-252-7355
Visit this company's website

Facility : Little Rock, AR

Corrosive Waste - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe (CW)§	PP	GSR or +GF+ FUSEAL	ASTM F1412
1 1/2" - 12" Sch 40
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Pipe (CW)§	PP	GSR or +GF+ FUSEAL	ASTM F1412
1 1/2" - 12" Sch 40
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Pipe (CW)§	PP	GSR or +GF+ FUSEAL	ASTM F1412
1 1/2" - 12" Sch 80
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Fittings (CW)§	PP	GSR or +GF+ FUSEAL	ASTM F1412
Cleanout Tee with Plug (S x S)
1 1/2"	2"	3"	4"
Sanitary Tee
1 1/2"	2"	3"	4"
2" x 2" x 1 1/2"	3" x 3" x 2"	3" x 3" x 1 1/2"	4" x 4" x 2"
4" x 4" x 3"	6" x 6" x 4"
Double Reducing Tee
3" x 3" x 2" x 2"	2" x 2" x 1 1/2" x 1 1/2"
Double Sanitary Tee
4"	3"	1 1/2"	2"
1/4" Bend - Vent
1 1/2"	2"	3"
1/4" Bend - Short Sweep
1 1/2"	2"	3"	4"
6"
1/4" Bend - Long Sweep
1 1/2"	2"	3"	4"
6"
1/4" Bend - Spigot Short Sweep
1 1/2"	2"	3"	4"
1/6" Bend
1 1/2"	2"	3"	4"
1/8" Bend - Spg x S
1 1/2"	2"	3"	4"
6"
1/8" Bend - S x S
1 1/2"	2"	3"	4"
6"
1/16" Bend
1 1/2"	2"	3"	4"
3-Way Ell
1 1/2"	2"
45° Wye
1 1/2"	2"	3"	4"
6"
45° Wye - Reducing
2" x 2" x 1 1/2"	3" x 3" x 2"	4" x 4" x 2"	4" x 4" x 3"
6" x 6" x 2"	6" x 6" x 3"	6" x 6" x 4"
45° Wye - Double Reducing
2" x 2" x 1/2" x 1/2"	3" x 3" x 2" x 2"	3" x 3" x 1 1/2" x 1 1/2"	4" x 4" x 2" x 2"
4" x 4" x 3" x 3"	6" x 6" x 4" x 4"
Long Turn Tee
1 1/2"	2"	3"	4"
2" x 2" x 1 1/2"	3" x 3" x 1 1/2"	3" x 3" x 2"	4" x 4" x 2"
4" x 4" x 3"
Cleanout Adapter
1 1/2"	2"	3"	4"
6"
Male Adapter (MPT x S)
1 1/2"	2"	3"	4"
Female Adapter (FPT x S)
6"	1 1/2"	2"	3"
4"
Unions
1 1/2"	2"	3"	4"
Union Nut Adapter - S
1 1/2"	2"
Union Nut Adapter - Spg
1 1/2"
Male Union Adapter - S
1 1/2"
Male Union Adapter - Spg
2"
Male Union Adapter - FPT
2"
Male Union Adapter - MPT
2"
Coupling
1 1/2"	2"	3"	4"
6"
Pipe Increaser
1 1/2" x 2"	2" x 3"	2" x 4"	3" x 4"
Reducer Bushing (Spg x S)
2" x 1 1/2"	3" x 1 1/2"	3" x 2"	4" x 2"
4" x 3"	6" x 4"
Plug
1 1/2"	2"	3"	4"
P-Trap - With Cleanout
1 1/2"	2"	3"	4"
P-Trap - Without Cleanout
1 1/2"	2"	3"	4"
P-Trap - Union
1 1/2"	2"
P-Trap - Slip Joint Inlet
1 1/2"
Strainer Adapter
1 1/2"
Swivel Strainer Adapter
1 1/2"	1 1/2" x 12L
Cap
1 1/2"	2"	3"	4"
6"
Flange
1 1/2"	2"	3"	4"
6"
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Pipe (CW)¢ §	PP	GSR or +GF+ FUSEAL	CSA B181.3
1 1/2" - 12" F8004-XXXX Sch 40
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Pipe (CW)¢ §	PP	GSR or +GF+ FUSEAL	CSA B181.3
1 1/2" - 12" P8004-XXX Sch 40
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Pipe (CW)¢ §	PP	GSR or +GF+ FUSEAL	CSA B181.3
1 1/2" - 12" F8008-XXX Sch 80
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Pipe (CW)¢ §	PP	GSR or +GF+ FUSEAL	CSA B181.3
1 1/2" - 12" R8008-XXX Sch 80
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Fittings (CW)¢ §	PP	GSR or +GF+ FUSEAL	CSA B181.3
1/16" Bend
1 1/2"	2"	3"	4"
1/4" Bend - Long Sweep
1 1/2"	2"	3"	4"
6"
1/4" Bend - Short Sweep
1 1/2"	2"	3"	4"
6"
1/4" Bend - Spigot Short Sweep
1 1/2"	2"	3"	4"
1/4" Bend - Vent
1 1/2"	2"	3"
1/6" Bend
1 1/2"	2"	3"	4"
1/8" Bend - S x S
1 1/2"	2"	3"	4"
6"
1/8" Bend - Spg x S
1 1/2"	2"	3"	4"
6"
3-Way Ell
1 1/2"	2"
45° Wye
1 1/2"	2"	3"	4"
6"
45° Wye - Double Reducing
4" x 4" x 3" x 3"	3" x 3" x 1 1/2" x 1 1/2"	3" x 3" x 2" x 2"	4" x 4" x 2" x 2"
2" x 2" x 1 1/2" x 1 1/2"	6" x 6" x 4" x 4"
45° Wye - Reducing
2" x 2" x 1 1/2"	3" x 3" x 2"	4" x 4" x 2"	4" x 4" x 3"
6" x 6" x 2"	6" x 6" x 3"	6" x 6" x 4"
Cap
1 1/2"	2"	3"	4"
6"
Cleanout Adapter
1 1/2"	2"	3"	4"
6"
Cleanout Tee with Plug (S x S)
1 1/2"	2"	3"	4"
Coupling
1 1/2"	2"	3"	4"
6"
Double Reducing Tee
2" x 2" x 1 1/2" x 1 1/2"
Double Sanitary Tee
1 1/2"	2"	3"
Female Adapter (FPT x S)
1 1/2"	2"	3"	4"
6"
Flange
1 1/2"	2"	3"	4"
6"
Long Turn Tee
1 1/2"	2"	2" x 2" x 1 1/2"	3"
3" x 3" x 1 1/2"	3" x 3" x 2"	4"	4" x 4" x 2"
4" x 4" x 3"
Male Adapter (MPT x S)
1 1/2"	2"	3"	4"
Male Union Adapter - FPT
2"
Male Union Adapter - MPT
2"
Male Union Adapter - S
1 1/2"
Male Union Adapter - Spg
2"
P-Trap - Slip Joint Inlet
1 1/2"
P-Trap - Union
1 1/2"	2"
P-Trap - With Cleanout
1 1/2"	2"	3"	4"
P-Trap - Without Cleanout
1 1/2"	2"	3"	4"
Pipe Increaser
1 1/2" x 2"	2" x 3"	2" x 4"	3" x 4"
Plug
1 1/2"	2"	3"	4"
Reducer Bushing (Spg x S)
2" x 1 1/2"	3" x 1 1/2"	3" x 2"	4" x 2"
4" x 3"	6" x 4"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Fittings (CW)§	PP	GSR or +GF+ FUSEAL FAST LOCK	ASTM F1412
1/16" Bend
1 1/2"	2"	3"	4"
1/4" Bend - Long Sweep
1 1/2"	2"	3"	4"
1/4" Bend - Short Sweep
1 1/2"	2"	3"	4"
1/4" Bend - Spigot Short Sweep
1 1/2"	2"	3"	4"
1/4" Bend - Vent
1 1/2"	2"	3"
1/6" Bend
1 1/2"	2"	3"	4"
1/8" Bend - S x S
1 1/2"	2"	3"	4"
1/8" Bend - Spg x S
1 1/2"	2"	3"	4"
3-Way Ell
1 1/2"	2"
45° Wye
1 1/2"	2"	3"	4"
45° Wye - Double Reducing
2" x 2" x 1/2" x 1/2"	3" x 3" x 1 1/2" x 1 1/2"	3" x 3" x 2" x 2"	4" x 4" x 2" x 2"
4" x 4" x 3" x 3"
45° Wye - Reducing
2" x 2" x 1 1/2"	3" x 3" x 2"	4" x 4" x 2"	4" x 4" x 3"
Cap
1 1/2"	2"	3"	4"
Cleanout Adapter
1 1/2"	2"	3"	4"
Cleanout Tee with Plug (S x S)
1 1/2"	2"	3"	4"
Coupling
1 1/2"	2"	3"	4"
Double Reducing Tee
2" x 2" x 1 1/2" x 1 1/2"	3" x 3" x 2" x 2"
Double Sanitary Tee
1 1/2"	2"	3"	4"
Female Adapter (FPT x S)
1 1/2"	2"	3"	4"
Flange
1 1/2"	2"	3"	4"
Long Turn Tee
1 1/2"	2"	2" x 2" x 1 1/2"	3"
3" x 3" x 1 1/2"	3" x 3" x 2"	4"	4" x 4" x 2"
4" x 4" x 3"
Male Adapter (MPT x S)
1 1/2"	2"	3"	4"
Male Union Adapter - FPT
2"
Male Union Adapter - MPT
2"
Male Union Adapter - S
1 1/2"
Male Union Adapter - Spg
2"
P-Trap - Slip Joint Inlet
1 1/2"
P-Trap - Union
1 1/2"	2"
P-Trap - With Cleanout
1 1/2"	2"	3"	4"
P-Trap - Without Cleanout
1 1/2"	2"	3"	4"
Pipe Increaser
1 1/2" x 2"	2" x 3"	2" x 4"	3" x 4"
Plug
1 1/2"	2"	3"	4"
Reducer Bushing (Spg x S)
2" x 1 1/2"	3" x 1 1/2"	3" x 2"	4" x 2"
4" x 3"	6" x 4"
Sanitary Tee
1 1/2"	2"	2" x 2" x 1 1/2"	3"
3" x 3" x 1 1/2"	3" x 3" x 2"	4"	4" x 4" x 2"
4" x 4" x 3"
Strainer Adapter
1 1/2"
Swivel Strainer Adapter
1 1/2"	1 1/2" x 12L
Union Nut Adapter - S
1 1/2"	2"
Union Nut Adapter - Spg
1 1/2"
Unions
1 1/2"	2"	3"	4"
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Fittings (CW)¢ §	PP	GSR or +GF+ FUSEAL FAST LOCK	CSA B181.3
1/16" Bend
1 1/2"	2"	3"	4"
1/4" Bend - Long Sweep
1 1/2"	2"	3"	4"
1/4" Bend - Short Sweep
1 1/2"	2"	3"	4"
1/4" Bend - Spigot Short Sweep
1 1/2"	2"	3"	4"
1/4" Bend - Vent
1 1/2"	2"	3"
1/6" Bend
1 1/2"	2"	3"	4"
1/8" Bend - S x S
1 1/2"	2"	3"	4"
1/8" Bend - Spg x S
1 1/2"	2"	3"	4"
3-Way Ell
1 1/2"	2"
45° Wye
1 1/2"	2"	3"	4"
45° Wye - Double Reducing
2" x 2" x 1/2" x 1/2"	3" x 3" x 1 1/2" x 1 1/2"	3" x 3" x 2" x 2"	4" x 4" x 2" x 2"
4" x 4" x 3" x 3"
45° Wye - Reducing
2" x 2" x 1 1/2"	3" x 3" x 2"	4" x 4" x 2"	4" x 4" x 3"
Cap
1 1/2"	2"	3"	4"
Cleanout Adapter
1 1/2"	2"	3"	4"
Cleanout Tee with Plug (S x S)
1 1/2"	2"	3"	4"
Coupling
1 1/2"	2"	3"	4"
Double Reducing Tee
2" x 2" x 1 1/2" x 1 1/2"	3" x 3" x 2" x 2"
Double Sanitary Tee
1 1/2"	2"	3"	4"
Female Adapter (FPT x S)
1 1/2"	2"	3"	4"
Flange
1 1/2"	2"	3"	4"
Long Turn Tee
1 1/2"	2"	2" x 2" x 1 1/2"	3"
3" x 3" x 1 1/2"	3" x 3" x 2"	4"	4" x 4" x 2"
4" x 4" x 3"
Male Adapter (MPT x S)
1 1/2"	2"	3"	4"
Male Union Adapter - FPT
2"
Male Union Adapter - MPT
2"
Male Union Adapter - S
1 1/2"
Male Union Adapter - Spg
2"
P-Trap - Slip Joint Inlet
1 1/2"
P-Trap - Union
1 1/2"	2"
P-Trap - With Cleanout
1 1/2"	2"	3"	4"
P-Trap - Without Cleanout
1 1/2"	2"	3"	4"
Pipe Increaser
1 1/2" x 2"	2" x 3"	2" x 4"	3" x 4"
Plug
1 1/2"	2"	3"	4"
Reducer Bushing (Spg x S)
2" x 1 1/2"	3" x 1 1/2"	3" x 2"	4" x 2"
4" x 3"	6" x 4"
Sanitary Tee
1 1/2"	2"	2" x 2" x 1 1/2"	3"
3" x 3" x 1 1/2"	3" x 3" x 2"	4"	4" x 4" x 2"
4" x 4" x 3"
Strainer Adapter
1 1/2"
Swivel Strainer Adapter
1 1/2"	1 1/2" x 12L
Union Nut Adapter - S
1 1/2"	2"
Union Nut Adapter - Spg
1 1/2"
Unions
1 1/2"	2"	3"	4"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Fittings (CW)§	PP	GSR or +GF+ Seadrain	ASTM F1412
Male Adapter (MPT x S)
4"
Male Union Adapter - FPT
2"
Male Union Adapter - MPT
2"
Male Union Adapter - S
1 1/2"
Male Union Adapter - Spg
2"
P-Trap - Slip Joint Inlet
1 1/2"
P-Trap - Union
1 1/2"
P-Trap - With Cleanout
1 1/2"	2"	3"	4"
P-Trap - Without Cleanout
1 1/2"	2"	3"	4"
Pipe Increaser
1 1/2" x 2"	2" x 3"	2" x 4"	3" x 4"
Plug
1 1/2"	2"	3"	4"
1/4" Bend - Vent
3"
1/6" Bend
1 1/2"	2"	3"	4"
1/8" Bend - S x S
1 1/2"	2"	3"	4"
6"
1/8" Bend - Spg x S
1 1/2"	2"	3"	4"
6"
3-Way Ell
1 1/2"	2"
45° Wye
1 1/2"	2"	3"	4"
6"
45° Wye - Double Reducing
2" x 2" x 1/2" x 1/2"	3" x 3" x 1 1/2" x 1 1/2"	3" x 3" x 2" x 2"	4" x 4" x 2" x 2"
4" x 4" x 3" x 3"	6" x 6" x 4" x 4"
45° Wye - Reducing
2" x 2" x 1 1/2"	3" x 3" x 2"	4" x 4" x 2"	4" x 4" x 3"
6" x 6" x 2"	6" x 6" x 3"	6" x 6" x 4"
Cap
1 1/2"	2"	3"	4"
6"
Cleanout Adapter
1 1/2"
Unions
1 1/2"	2"	3"	4"
Female Adapter (FPT x S)
4"	6"
Flange
1 1/2"	2"	3"	4"
6"
Long Turn Tee
1 1/2"	2"	2" x 2" x 1 1/2"	3"
3" x 3" x 1 1/2"	3" x 3" x 2"	4"	4" x 4" x 2"
4" x 4" x 3"
Male Adapter (MPT x S)
1 1/2"	2"	3"
Cleanout Adapter
2"	3"	4"	6"
Cleanout Tee with Plug (S x S)
1 1/2"	2"	3"	4"
Coupling
1 1/2"	2"	3"	4"
6"
Double Reducing Tee
2" x 2" x 1 1/2" x 1 1/2"	3" x 3" x 2" x 2"
Double Sanitary Tee
1 1/2"	2"	3"	4"
Female Adapter (FPT x S)
1 1/2"	2"	3"
1/4" Bend - Long Sweep
1 1/2"	2"	3"	4"
6"
1/4" Bend - Short Sweep
1 1/2"	2"	3"	4"
6"
1/4" Bend - Spigot Short Sweep
1 1/2"	2"	3"	4"
1/4" Bend - Vent
1 1/2"
Reducer Bushing (Spg x S)
2" x 1 1/2"	3" x 1 1/2"	3" x 2"	4" x 2"
4" x 3"	6" x 4"
Sanitary Tee
1 1/2"	2"	2" x 2" x 1 1/2"	3"
3" x 3" x 1 1/2"	3" x 3" x 2"	4"	4" x 4" x 2"
4" x 4" x 3"	6" x 6" x 4"
Strainer Adapter
1 1/2"
Swivel Strainer Adapter
1 1/2"	1 1/2" x 12L
Union Nut Adapter - S
1 1/2"	2"
Union Nut Adapter - Spg
1 1/2"
1/4" Bend - Vent
2"
1/16" Bend
1 1/2"	2"	3"	4"
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Fittings (CW)¢ §	PP	GSR or +GF+ Seadrain	CSA B181.3
Plug
3"	4"
Reducer Bushing (Spg x S)
2" x 1 1/2"	3" x 1 1/2"	3" x 2"	4" x 2"
4" x 3"	6" x 4"
Sanitary Tee
1 1/2"	2"	2" x 2" x 1 1/2"	3"
3" x 3" x 1 1/2"	3" x 3" x 2"	4"	4" x 4" x 2"
4" x 4" x 3"	6" x 6" x 4"
Strainer Adapter
1 1/2"
Swivel Strainer Adapter
1 1/2"	1 1/2" x 12L
Union Nut Adapter - S
1 1/2"	2"
Union Nut Adapter - Spg
1 1/2"
Unions
1 1/2"	2"	3"	4"
Cleanout Adapter
1 1/2"	2"	3"	4"
6"
Cleanout Tee with Plug (S x S)
1 1/2"	2"	3"	4"
Coupling
1 1/2"	2"	3"	4"
6"
Double Reducing Tee
2" x 2" x 1 1/2" x 1 1/2"	3" x 3" x 2" x 2"
Double Sanitary Tee
1 1/2"	2"	3"	4"
Female Adapter (FPT x S)
1 1/2"	2"	3"	4"
6"
Flange
1 1/2"	2"	3"	4"
6"
Long Turn Tee
1 1/2"	2"	2" x 2" x 1 1/2"	3"
3" x 3" x 1 1/2"	3" x 3" x 2"	4"	4" x 4" x 2"
4" x 4" x 3"
Male Adapter (MPT x S)
1 1/2"	2"	3"	4"
Male Union Adapter - FPT
2"
Male Union Adapter - MPT
2"
Male Union Adapter - S
1 1/2"
Male Union Adapter - Spg
2"
P-Trap - Slip Joint Inlet
1 1/2"
P-Trap - Union
1 1/2"	2"
P-Trap - With Cleanout
1 1/2"	2"	3"	4"
P-Trap - Without Cleanout
1 1/2"	2"	3"	4"
Pipe Increaser
1 1/2" x 2"	2" x 3"	2" x 4"	3" x 4"
Plug
1 1/2"	2"
1/16" Bend
1 1/2"	2"	3"	4"
1/4" Bend - Long Sweep
1 1/2"	2"	3"	4"
6"
1/4" Bend - Short Sweep
1 1/2"	2"	3"	4"
6"
1/4" Bend - Spigot Short Sweep
1 1/2"	2"	3"	4"
1/4" Bend - Vent
1 1/2"	2"	3"
1/6" Bend
1 1/2"	2"	3"	4"
1/8" Bend - S x S
1 1/2"	2"	3"	4"
6"
1/8" Bend - Spg x S
1 1/2"	2"	3"	4"
6"
3-Way Ell
1 1/2"	2"
45° Wye
1 1/2"	2"	3"	4"
6"
45° Wye - Double Reducing
2" x 2" x 1/2" x 1/2"	3" x 3" x 1 1/2" x 1 1/2"	3" x 3" x 2" x 2"	4" x 4" x 2" x 2"
4" x 4" x 3" x 3"	6" x 6" x 4" x 4"
45° Wye - Reducing
2" x 2" x 1 1/2"	3" x 3" x 2"	4" x 4" x 2"	4" x 4" x 3"
6" x 6" x 2"	6" x 6" x 3"	6" x 6" x 4"
Cap
1 1/2"	2"	3"	4"
6"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Fittings (CW)§	PP	GSR or +GF+ Sea Drain FAST LOCK	ASTM F1412
1/16" Bend
1 1/2"	2"	3"	4"
1/4" Bend - Long Sweep
1 1/2"	2"	3"	4"
1/4" Bend - Short Sweep
1 1/2"	2"	3"	4"
1/4" Bend - Spigot Short Sweep
1 1/2"	2"	3"	4"
1/4" Bend - Vent
1 1/2"	2"	3"
1/6" Bend
1 1/2"	2"	3"	4"
1/8" Bend - S x S
1 1/2"	2"	3"	4"
1/8" Bend - Spg x S
1 1/2"	2"	3"	4"
3-Way Ell
1 1/2"	2"
45° Wye
1 1/2"	2"	3"	4"
45° Wye - Double Reducing
2" x 2" x 1/2" x 1/2"	3" x 3" x 1 1/2" x 1 1/2"	3" x 3" x 2" x 2"	4" x 4" x 2" x 2"
4" x 4" x 3" x 3"
45° Wye - Reducing
2" x 2" x 1 1/2"	3" x 3" x 2"	4" x 4" x 2"	4" x 4" x 3"
Cap
1 1/2"	2"	3"	4"
Cleanout Adapter
1 1/2"	2"	3"	4"
Cleanout Tee with Plug (S x S)
1 1/2"	2"	3"	4"
Coupling
1 1/2"	2"	3"	4"
Double Reducing Tee
2" x 2" x 1 1/2" x 1 1/2"	3" x 3" x 2" x 2"
Double Sanitary Tee
1 1/2"	2"	3"	4"
Female Adapter (FPT x S)
1 1/2"	2"	3"	4"
Flange
1 1/2"	2"	3"	4"
6"
Long Turn Tee
1 1/2"	2"	2" x 2" x 1 1/2"	3"
3" x 3" x 1 1/2"	3" x 3" x 2"	4"	4" x 4" x 2"
4" x 4" x 3"
Male Adapter (MPT x S)
1 1/2"	2"	3"	4"
Male Union Adapter - FPT
2"
Male Union Adapter - MPT
2"
Male Union Adapter - S
1 1/2"
Male Union Adapter - Spg
2"
P-Trap - Slip Joint Inlet
1 1/2"
P-Trap - Union
1 1/2"	2"
P-Trap - With Cleanout
1 1/2"	2"	3"	4"
P-Trap - Without Cleanout
1 1/2"	2"	3"	4"
Pipe Increaser
1 1/2" x 2"	2" x 3"	2" x 4"	3" x 4"
Plug
1 1/2"	2"	3"	4"
Reducer Bushing (Spg x S)
2" x 1 1/2"	3" x 1 1/2"	3" x 2"	4" x 2"
4" x 3"	6" x 4"
Sanitary Tee
1 1/2"	2"	2" x 2" x 1 1/2"	3"
3" x 3" x 1 1/2"	3" x 3" x 2"	4"	4" x 4" x 2"
4" x 4" x 3"
Strainer Adapter
1 1/2"
Swivel Strainer Adapter
1 1/2"	1 1/2" x 12L
Union Nut Adapter - S
1 1/2"	2"
Union Nut Adapter - Spg
1 1/2"
Unions
1 1/2"	2"	3"	4"
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Fittings (CW)¢ §	PP	GSR or +GF+ Sea Drain FAST LOCK	CSA B181.3
1/16" Bend
1 1/2"	2"	3"	4"
1/4" Bend - Long Sweep
1 1/2"	2"	3"	4"
1/4" Bend - Short Sweep
1 1/2"	2"	3"	4"
1/4" Bend - Spigot Short Sweep
1 1/2"	2"	3"	4"
1/4" Bend - Vent
1 1/2"	2"	3"
1/6" Bend
1 1/2"	2"	3"	4"
1/8" Bend - S x S
1 1/2"	2"	3"	4"
1/8" Bend - Spg x S
1 1/2"	2"	3"	4"
3-Way Ell
1 1/2"	2"
45° Wye
1 1/2"	2"	3"	4"
45° Wye - Double Reducing
2" x 2" x 1/2" x 1/2"	3" x 3" x 1 1/2" x 1 1/2"	3" x 3" x 2" x 2"	4" x 4" x 2" x 2"
4" x 4" x 3" x 3"
45° Wye - Reducing
2" x 2" x 1 1/2"	3" x 3" x 2"	4" x 4" x 2"	4" x 4" x 3"
Cap
1 1/2"	2"	3"	4"
Cleanout Adapter
1 1/2"	2"	3"	4"
Cleanout Tee with Plug (S x S)
1 1/2"	2"	3"	4"
Coupling
1 1/2"	2"	3"	4"
Double Reducing Tee
2" x 2" x 1 1/2" x 1 1/2"	3" x 3" x 2" x 2"
Double Sanitary Tee
1 1/2"	2"	3"	4"
Female Adapter (FPT x S)
1 1/2"	2"	3"	4"
Flange
1 1/2"	2"	3"	4"
Long Turn Tee
1 1/2"	2"	2" x 2" x 1 1/2"	3"
3" x 3" x 1 1/2"	3" x 3" x 2"	4"	4" x 4" x 2"
4" x 4" x 3"
Male Adapter (MPT x S)
1 1/2"	2"	3"	4"
Male Union Adapter - FPT
2"
Male Union Adapter - MPT
2"
Male Union Adapter - S
1 1/2"
Male Union Adapter - Spg
2"
P-Trap - Slip Joint Inlet
1 1/2"
P-Trap - Union
1 1/2"	2"
P-Trap - With Cleanout
1 1/2"	2"	3"	4"
P-Trap - Without Cleanout
1 1/2"	2"	3"	4"
Pipe Increaser
1 1/2" x 2"	2" x 3"	2" x 4"	3" x 4"
Plug
1 1/2"	2"	3"	4"
Reducer Bushing (Spg x S)
2" x 1 1/2"	3" x 1 1/2"	3" x 2"	4" x 2"
4" x 3"
Sanitary Tee
1 1/2"	2"	2" x 2" x 1 1/2"	3"
3" x 3" x 1 1/2"	3" x 3" x 2"	4"	4" x 4" x 2"
4" x 4" x 3"
Strainer Adapter
1 1/2"
Swivel Strainer Adapter
1 1/2"	1 1/2" x 12L
Union Nut Adapter - S
1 1/2"	2"
Union Nut Adapter - Spg
1 1/2"
Unions
1 1/2"	2"	3"	4"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Pipe (CW)¢ §	PVDF	Fuseal 25/50	CSA B181.3
1 1/2" - 6" 37C0130XX Sch 40
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Pipe (CW)¢ §	PVDF	Fuseal 25/50	ASTM F1673
1 1/2" - 6" 37C0130XX Sch 40
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Fittings (CW)¢ §	PVDF	Fuseal 25/50	CSA B181.3
Female Adapter (SxFPT)
3"	4"	6"
Glass Adapter (SxBead Glass Pipe)
1 1/2"	2"	3"	4"
6"
Iron Pipe Adapter (SxIron Pipe Bead)
1 1/2"	2"	3"	4"
Flange (S)
1 1/2"	2"	3"	4"
6"
Union (PVDFxPVDF)/PVDF Nut EPDM (SxS)
1 1/2"	2"	3"	4"
Union (PVDFxPVDF)/PVDF Nut FPM (SxS)
1 1/2"	2"	3"	4"
Union (PPFRxPVDF)/PPFR Nut EPDM (SxS)
1 1/2"	2"	3"	4"
Union (PPFRxPVDF)/PPFR Nut FPM (SxS)
1 1/2"	2"	3"	4"
Union (PVDFxPPFR)/PVDF Nut EPDM (SxS)
1 1/2"	2"	3"	4"
Clean-Out Adapter w/Plug (SpgxFT)
1 1/2"	2"	3"	4"
6"
Countersink Plug for Cleanout
3"	4"
P-Trap Cleanout (SxS)
1 1/2"	2"	3"	4"
P-Trap (SxS)
1 1/2"	2"	3"	4"
6"
P-Trap Union Connection (SxS)
1 1/2"
Double 45° Wye (SxSxSxS)
3"	4"
Double 45° Wye - Reducing (SxSxSxS) - BUSH
2" x 2" x 1 1/2" x 1 1/2"	3" x 3" x 1 1/2" x 1 1/2"	3" x 3" x 2" x 2"	4" x 4" x 2" x 2"
4" x 4" x 3" x 3"
Long Turn Tee Wye (SxSxS)
1 1/2"	2"	3"	4"
Combo Wye (SxSxS) - FAB
6"
Long Turn Tee Wye - Reducing (SxSxS) - BUSH
2" x 2" x 1 1/2"	3" x 3" x 1 1/2"	3" x 3" x 2"	4" x 4" x 2"
4" x 4" x 3"
Combo Wye - Reducing (SxSxS) - FAB
6" x 6" x 3"	6" x 6" x 4"
Double Combo Wye (SxSxSxS)
1 1/2"	2"	3"	4"
Double Combo Wye - Reducing (SxSxSxS) - BUSH
2" x 2" x 1 1/2" x 1 1/2"	3" x 3" x 1 1/2" x 1 1/2"	3" x 3" x 2" x 2"	4" x 4" x 2" x 2"
4" x 4" x 3" x 3"
Sanitary Tee (SxSxS)
1 1/2"	2"	3"	4"
Sanitary Tee - Reducing (SxSxS) - BUSH
2" x 2" x 1 1/2"	3" x 3" x 1 1/2"	3" x 3" x 2"	4" x 4" x 2"
4" x 4" x 3"
Double Sanitary Tee (SxSxSxS)
2"
P-Trap Union Connection (SxS)
2"
Swivel Sink Strainer Adapter (SpgxFT)
1 1/2"
Swivel Sink Strainer Replacement Gasket
1 1/2"
FPT Trap Primer (SpgxSPG) - FAB
1 1/2" x 1/2"	2" x 1/2"	3" x 1/2"	4" x 1/2"
6" x 3/4"
Female Adapter (SxFPT)
2"
Double Sanitary Tee (SxSxSxS)
3"
Double Sanitary Tee - Reducing (SxSxSxS) - BUSH
2" x 2" x 1 1/2" x 1 1/2"	3" x 3" x 1 1/2" x 1 1/2"	3" x 3" x 2" x 2"
Pipe Increaser (SpgxSpg)
2" x 1 1/2"	3" x 1 1/2"	3" x 2"	4" x 2"
4" x 3"
Reducer Bushing (SpgxS)
2" x 1 1/2"	3" x 1 1/2"	3" x 2"	4" x 2"
4" x 3"	6" x 4"
Cap (S)
1 1/2"	2"	3"	4"
6"
Male Adapter (SxMPT)
1 1/2"	2"	3"	4"
6"
Female Adapter (SxFPT)
1 1/2"
Coupling (SxS)
1 1/2"	2"	3"	4"
6"
1/4" Bend - Long Sweep (SxS)
1 1/2"	2"	3"	4"
1/4" Bend - Short Sweep (SxS)
1 1/2"	2"	3"	4"
1/8" Bend (SxS)
1 1/2"	2"	3"	4"
45° Wye (SxSxS)
1 1/2"	2"	3"	4"
6"
45° Wye - Reducing (SxSxS) - BUSH
2" x 2" x 1 1/2"	3" x 3" x 1 1/2"	3" x 3" x 2"	4" x 4" x 2"
4" x 4" x 3"
Double 45° Wye (SxSxSxS)
1 1/2"	2"
Union (PVDFxPPFR)/PVDF Nut FPM (SxS)
1 1/2"	2"	3"	4"
1-1/2" Clean-Out Tee w/Plug (SxSxFT)
1 1/2"	2"	3"	4"
6"-FAB
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Fittings (CW)¢ §	PVDF	Fuseal 25/50	ASTM F1673
45° Wye (SxSxS)
3"	4"	6"
45° Wye - Reducing (SxSxS) - BUSH
2" x 2" x 1 1/2"	3" x 3" x 1 1/2"	3" x 3" x 2"	4" x 4" x 2"
4" x 4" x 3"
Double 45° Wye (SxSxSxS)
1 1/2"	2"	3"	4"
Double 45° Wye - Reducing (SxSxSxS) - BUSH
2" x 2" x 1 1/2" x 1 1/2"	3" x 3" x 1 1/2" x 1 1/2"	3" x 3" x 2" x 2"	4" x 4" x 2" x 2"
4" x 4" x 3" x 3"
Long Turn Tee Wye (SxSxS)
1 1/2"	2"	3"	4"
Combo Wye (SxSxS) - FAB
6"
Long Turn Tee Wye - Reducing (SxSxS) - BUSH
2" x 2" x 1 1/2"	3" x 3" x 1 1/2"	3" x 3" x 2"	4" x 4" x 2"
4" x 4" x 3"
Combo Wye - Reducing (SxSxS) - FAB
6" x 6" x 3"	6" x 6" x 4"
Double Combo Wye (SxSxSxS)
1 1/2"	2"	3"	4"
Double Combo Wye - Reducing (SxSxSxS) - BUSH
2" x 2" x 1 1/2" x 1 1/2"	3" x 3" x 1 1/2" x 1 1/2"	3" x 3" x 2" x 2"	4" x 4" x 2" x 2"
Pipe Increaser (SpgxSpg)
4" x 3"
Reducer Bushing (SpgxS)
2" x 1 1/2"	3" x 1 1/2"	3" x 2"	4" x 2"
4" x 3"	6" x 4"
Cap (S)
1 1/2"	2"	3"	4"
6"
Male Adapter (SxMPT)
1 1/2"	2"	3"	4"
6"
Female Adapter (SxFPT)
1 1/2"	2"	3"	4"
6"
Glass Adapter (SxBead Glass Pipe)
1 1/2"	2"	3"	4"
6"
Iron Pipe Adapter (SxIron Pipe Bead)
1 1/2"	2"	3"	4"
Flange (S)
1 1/2"	2"	3"	4"
6"
Union (PVDFxPVDF)/PVDF Nut EPDM (SxS)
1 1/2"	2"	3"	4"
Union (PVDFxPVDF)/PVDF Nut FPM (SxS)
1 1/2"	2"	3"	4"
Union (PPFRxPVDF)/PPFR Nut EPDM (SxS)
1 1/2"
1/4" Bend - Short Sweep (SxS)
1 1/2"	2"	3"	4"
Coupling (SxS)
1 1/2"	2"	3"	4"
6"
1/4" Bend - Long Sweep (SxS)
1 1/2"	2"	3"	4"
1/8" Bend (SxS)
1 1/2"	2"	3"	4"
45° Wye (SxSxS)
1 1/2"	2"
Union (PPFRxPVDF)/PPFR Nut EPDM (SxS)
2"	3"	4"
Union (PPFRxPVDF)/PPFR Nut FPM (SxS)
1 1/2"	2"	3"	4"
Union (PVDFxPPFR)/PVDF Nut EPDM (SxS)
1 1/2"	2"	3"	4"
Union (PVDFxPPFR)/PVDF Nut FPM (SxS)
1 1/2"	2"	3"	4"
1 1/2" Clean-Out Tee w/Plug (SxSxFT)
1 1/2"	2"	3"	4"
6"-FAB
Clean-Out Adapter w/Plug (SpgxFT)
1 1/2"	2"	3"	4"
6"
Countersink Plug for Cleanout
3"	4"
P-Trap Cleanout (SxS)
1 1/2"	2"	3"	4"
P-Trap (SxS)
1 1/2"	2"	3"	4"
6"
P-Trap Union Connection (SxS)
1 1/2"	2"
Swivel Sink Strainer Adapter (SpgxFT)
1 1/2"
Swivel Sink Strainer Replacement Gasket
1 1/2"
FPT Trap Primer (SpgxSPG) - FAB
1 1/2" x 1/2"	2" x 1/2"	3" x 1/2"	4" x 1/2"
6" x 3/4"
Double Combo Wye - Reducing (SxSxSxS) - BUSH
4" x 4" x 3" x 3"
Sanitary Tee (SxSxS)
1 1/2"	2"	3"	4"
Sanitary Tee - Reducing (SxSxS) - BUSH
2" x 2" x 1 1/2"	3" x 3" x 1 1/2"	3" x 3" x 2"	4" x 4" x 2"
4" x 4" x 3"
Double Sanitary Tee (SxSxSxS)
2"	3"
Double Sanitary Tee - Reducing (SxSxSxS) - BUSH
2" x 2" x 1 1/2" x 1 1/2"	3" x 3" x 1 1/2" x 1 1/2"	3" x 3" x 2" x 2"
Pipe Increaser (SpgxSpg)
2" x 1 1/2"	3" x 1 1/2"	3" x 2"	4" x 2"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings+ ** [G]*	PVC	+GF+ or GSR	ASTM D2464
Tees, T x T x T
805-xxx	1/4" - 4"
Tees, S x S x T
802-xxx	1/2" - 2"
90° Ell, S x T
807-xxx	1/2" - 3"
90° Ell, T x T
808-xxx	1/4" - 4"
45° Ell, T x T
819-xxx	1/4" - 4"
Coupling, T x T
830-xxx	1/4" - 4"
Reducer Coupling, T x T
830-xxx	3/8" x 1/4"	3/4" x 1/2"	1/2" x 3/8"
1/2" x 3/4"	1/2" x 1/4"	1" x 1/2"	1" x 3/4"
1 1/4" x 3/4"	1 1/2" x 1"	2" x 1 1/2"
Female Adapter, S x T
835-xxx	1/4" - 4"
Male Adapter, S x MT
836-xxx	1/2" - 4"
Nipple, MT x MT
861-xxx	1/2" - 3"
Reducer Bushing, Spg x T
838-xxx	3/8" x 1/4"	1/2" x 1/4"	1/2" x 3/8"
3/4" x 1/4"	3/4" x 1/2"	1" x 1/2"	1" x 3/4"
1 1/4" x 1/2"	1 1/4" x 3/4"	1 1/4" x 1"	1 1/4" x 1/2"
1 1/4" x 1 1/4"	1 1/2" x 1/2"	1 1/2" x 3/4"	1 1/2" x 1"
1 1/2" x 1 1/4"	2" x 1/2"	2" x 3/4"	2" x 1"
2" x 1 1/4"	2" x 1 1/2"	2 1/2" x 1 1/2"	2 1/2" x 2"
3" x 2"	3" x 2 1/2"	4" x 2"	4" x 3"
Reducer Bushing, MT x T
839-xxx	3/8" x 1/4"	1/2" x 1/4"	1/2" x 3/8"
3/4" x 1/4"	3/4" x 3/8"	3/4" x 1/2"	1" x 1/4"
1" x 1/2"	1" x 3/4"	1 1/4" x 1/2"	1 1/4" x 3/4"
1 1/4" x 1"	1 1/2" x 3/4"	1 1/2" x 1"	1 1/2" x 1 1/4"
2" x 1/2"	2" x 3/4"	2" x 1"	2" x 1 1/4"
2" x 1 1/2"	3" x 2"	4" x 2"	4" x 3"
Cap, T
848-xxx	1/4" - 4"
Plug, MT
850-xxx	1/4" - 4"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. *** -xxx Suffix designates nominal size [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings+ ** [G]*	PVC	+GF+ or GSR	ASTM D2466
Tee, S x S x S
401-xxx	1/2" - 10"
Tee, S x S x T
402-xxx	1/2" - 12"
Reducing Tee, S x S x S
401-xxx	1/2" x 1/2" x 3/4"	1/2" x 1/2" x 1"	3/4" x 1/2" x 1/2"
3/4" x 1/2" x 3/4"	3/4" x 3/4" x 1/2"	3/4" x 3/4" x 1"	1" x 1/2" x 1"
1" x 3/4" x 1/2"	1" x 3/4" x 3/4"	1" x 1" x 1/2"	1" x 1" x 3/4"
1" x 1" x 1 1/4"	1" x 1" x 1 1/2"	1 1/4" x 1" x 1/2"	1 1/4" x 1" x 1"
1 1/4" x 1 1/4" x 1/2"	1 1/4" x 1 1/4" x 3/4"	1 1/4" x 1 1/4" x 1"	1 1/4" x 1 1/4" x 1 1/2"
1 1/4" x 1 1/4" x 2"	1 1/2" x 1 1/4" x 1/2"	1 1/2" x 1 1/4" x 1/2"	1 1/2" x 1 1/4" x 3/4"
1 1/2" x 1 1/4" x 1"	1 1/2" x 1 1/2" x 1/2"	1 1/2" x 1 1/2" x 3/4"	1 1/2" x 1 1/2" x 1"
1 1/2" x 1 1/2" x 1 1/4"	1 1/2" x 1 1/2" x 2"	2" x 1/2" x 3/4"	2" x 1 1/2" x 1"
2" x 2" x 1/2"	2" x 2" x 3/4"	2" x 2" x 1"	2" x 2" x 1 1/4"
2" x 2" x 1 1/2"	2 1/2" x 2 1/2" x 1/2"	2 1/2" x 2 1/2" x 3/4"	2 1/2" x 2 1/2" x 1"
3" x 3" x 1/2"	3" x 3" x 3/4"	3" x 3" x 1"	3" x 3" x 1 1/4"
3" x 3" x 1 1/2"	3" x 3" x 2"	4" x 4" x 1/2"	4" x 4" x 3/4"
4" x 4" x 1"	4" x 4" x 1 1/4"	4" x 4" x 1 1/2"	4" x 4" x 2"
4" x 4" x 3"	6" x 6" x 2"	6" x 6" x 3"	6" x 6" x 4"
8" x 8" x 3"	8" x 8" x 4"
Reducing Tee, S x S x T
402-xxx	1/2" x 1/2" x 3/4"	3/4" x 1/2" x 1/2"	3/4" x 1/2" x 3/4"
3/4" x 3/4" x 1/2"	1" x 3/4" x 1/2"	1" x 1" x 1/2"	1" x 1" x 3/4"
1 1/4" x 1" x 1/2"	1 1/4" x 1" x 1"	1 1/4" x 1 1/4" x 1/2"	1 1/4" x 1 1/4" x 3/4"
1 1/4" x 1 1/4" x 1"	1 1/2" x 1 1/4" x 1/2"	1 1/2" x 1 1/4" x 3/4"	1 1/2" x 1 1/4" x 1"
1 1/2" x 1 1/2" x 3/4"	1 1/2" x 1 1/2" x 1"	1 1/2" x 1 1/2" x 1/2"	1 1/2" x 1 1/2" x 3/4"
1 1/2" x 1 1/2" x 1"	1 1/2" x 1 1/2" x 1 1/4"	2" x 1 1/2" x 3/4"	2" x 1 1/2" x 1"
2" x 2" x 1/2"	2" x 2" x 3/4"	2" x 2" x 1"	2" x 2" x 1 1/4"
2" x 2" x 1 1/2"	2 1/2" x 2 1/2" x 3/4"	2 1/2" x 2 1/2" x 1"	4" x 4" x 3"
6" x 6" x 3"
90° Ell, S x S
406-xxx	1/2" - 12"
90° Reducing Ell, S x S
406-xxx	3/4" x 1/2"	1 1/4" x 1"	1" x 1/2"
1 1/2" x 1"	1" x 3/4"
90° Ell, S x T
407-xxx	1/2" x 3/4"	1" x 3/4"	3/4" x 1/2"
1 1/4" x 1"	1" x 1/2"	1 1/2" x 1"
90° Ell, S x FT
407-xxx	1/2" - 2"
90° Ell, T x T
408-xxx	1/2" - 1 1/4"
90° Street Ell, Spg x S
409-xxx	1/2" - 2"
90° Street Ell, Mt x S
410-xxx	1/2" - 2"
90° Street Ell, MT x FT
412-xxx	1/2" - 2"
45° Ell, S x S
417-xxx	1/2" - 8"
Crosses, S x S x S x S
420-xxx	1/2" - 2"	2 1/2" x 2 1/2" x 2 1/2" x 1 1/2"	3" x 3" x 1 1/2" x 1 1/2"
4" x 4" x 1" x 1"	4" x 4" x 2" x 2"	3" x 3" x 1" x 1"	3" x 3" x 2" x 2"
4" x 4" x 1 1/2" x 1 1/2"
Coupling, S x S
429-xxx	1/2" - 12"	3/4" x 1/2"	1" x 3/4"
Coupling, T x T
430-xxx	1/2" - 1"
Female Adapter, S x T
435-xxx	1/2" - 8"	3/4" x 1/2"	3/4" x 1"
1" x 3/4"
Male Adapter, MT x S
436-xxx	1/2" - 6"	1/2" x 3/4"	3/4" x 1/2"
3/4" x 1"	1" x 3/4"	1" x 1 1/4"	1 1/4" x 1"
1 1/4" x 1 1/2"	1 1/2" x 1 1/4"	1 1/2" x 2"	2" x 1 1/2"
3" x 4"
Reducer Bushing, Spg x S
437-xxx	3/4" x 1/2"	1" x 1/2"	1" x 3/4"
1 1/4" x 1/2"	1 1/4" x 3/4"	1 1/4" x 1"	1 1/2" x 1/2"
1 1/2" x 3/4"	1 1/2" x 1"	1 1/2" x 1 1/4"	1 1/2" x 1"
2" x 1/2"	2" x 3/4"	2" x 1"	2" x 1 1/4"
2" x 1 1/2"	2 1/2" x 3/4"	2 1/2" x 1"	2 1/2" x 1 1/4"
2 1/2" x 1 1/2"	2 1/2" x 2"	3" x 1"	3" x 1 1/4"
3" x 1 1/2"	3" x 2"	3" x 2 1/2"	4" x 2"
4" x 2 1/2"	4" x 3"	5" x 4"	6" x 3"
6" x 4"	6" x 4"	6" x 5"	8" x 2"
8" x 4"	8" x 6"	10" x 8"
Reducer Bushing, Spg x T
438-xxx	1/2" x 1/4"	1/2" x 3/8"	3/4" x 1/4"
3/4" x 1/2"	1" x 1/2"	1" x 3/4"	1 1/4" x 1/2"
1 1/4" x 3/4"	1 1/4" x 1"	1 1/4" x 1 1/2"	1 1/2" x 1/2"
1 1/2" x 3/4"	1 1/2" x 1"	1 1/2" x 1 1/4"	2" x 1/2"
2" x 3/4"	2" x 1"	2" x 1 1/4"	2" x 1 1/2"
2 1/2" x 1 1/2"	2 1/2" x 2"	3" x 3/4"	3" x 1"
3" x 2"	3" x 2 1/2"	4" x 1"	4" x 2"
4" x 2 1/2"	4" x 3"	6" x 4"
Reducer Bushing, MT x T
439-xxx	1/2" x 3/8"	3/4" x 1/2"	1" x 3/4"
1 1/4" x 3/4"	1 1/4" x 1"	1 1/2" x 1/2"	1 1/2" x 3/4"
1 1/2" x 1"	1 1/2" x 1 1/4"	2" x 1"	2" x 1 1/2"
Cap, S
447-xxx	1/2" - 12"
Cap, T
448-xxx	1/2" - 6"
Plug, MT
450-xxx	1/2" - 4"
Plug, S
449-xxx	1/2" - 4"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. *** -xxx Suffix designates nominal size [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings+ @ ** [G]*	PVC	+GF+ or GSR	ASTM D2467
Tee, S x S x S
801-xxx	1/4" - 12"
Reducing Tee, S x S x S
801-xxx	3/4" x 3/4" x 1/2"	1" x 1" x 1/2"	1" x 1" x 3/4"
1 1/4" x 1 1/4" x 1"	1 1/2" x 1 1/2" x 1/2"	1 1/2" x 1 1/2" x 3/4"	1 1/2" x 1 1/2" x 1"
1 1/2" x 1 1/2" x 1 1/4"	2" x 2" x 1/2"	2" x 2" x 3/4"	2" x 2" x 1"
2" x 2" x 1 1/2"	2 1/2" x 2 1/2" x 2"	3" x 3" x 1 1/2"	3" x 3" x 2"
4" x 4" x 2"	4" x 4" x 2"	4" x 4" x 3"	6" x 6" x 4"
8" x 8" x 6"
90° Ell, S x S
806-xxx	1/4" - 12"
45° Ell, S x S
817-xxx	1/4" - 12"
Coupling, S x S
829-xxx	1/4" - 12"
Reducer Coupling, S x S
829-xxx	3/4" x 1/2"	1" x 1/2"	1" x 3/4"
1 1/4" x 3/4"	1 1/4" x 1"	1 1/2" x 3/4"	1 1/2" x 1"
1 1/2" x 1 1/4"	2" x 1"	2" x 1 1/4"	2" x 1 1/2"
2 1/2" x 1 1/2"	3" x 2"	4" x 3"	6" x 4"
8" x 6"
Reducer Bushing, Spg x S
837-xxx	1/2" x 1/4"	1/2" x 3/8"	3/4" x 1/2"
1" x 1/2"	1" x 3/4"	1 1/4" x 1/2"	1 1/4" x 3/4"
1 1/4" x 1"	1 1/2" x 1/2"	1 1/2" x 3/4"	1 1/2" x 1"
1 1/2" x 1 1/4"	2" x 1/2"	2" x 3/4"	2" x 1"
2" x 1 1/4"	2" x 1 1/2"	2 1/2" x 1 1/2"	2 1/2" x 2"
3" x 1 1/2"	3" x 2"	3" x 2 1/2"	4" x 2"
4" x 3"	6" x 3"	6" x 4"	8" x 6"
10" x 6"	10" x 8"	12" x 8"	12" x 10"
Cap, S
847-xxx	1/4" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. @ Fittings or systems to be installed in accordance with the manufacturer's instructions, ASTM Standard and latest edition of Uniform Plumbing Code. *** -xxx Suffix designates nominal size [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings+ @ ** [G]*	PVC	+GF+ or GSR	ASTM D2467
Tees, T x T x T
805-xxx	1/4" - 12"
Tees, S x S x T
802-xxx	1/2" - 12"
90° Ell, S x T
807-xxx	1/2" - 12"
90° Ell, T x T
808-xxx	1/4" - 12"
45° Ell, T x T
819-xxx	1/4" - 12"
Coupling, T x T
830-xxx	1/4" - 4"
Reducer Coupling, T x T
830-xxx	3/8" x 1/4"	3/4" x 1/2"	1 1/4" x 3/4"
1/2" x 1/4"	1" x 1/2"	1 1/2" x 1"	1/2" x 3/4"
1" x 3/4"	2" x 1 1/2"
Female Adapter, S x T
835-xxx	1/4" - 4"
Male Adapter, S x T
836-xxx	1/2" - 4"
Nipple, MT x MT
861-xxx	1/2" x 3"
Reducer Bushing, Spg x T
838-xxx	3/8" x 1/4"	1/2" x 1/4"	1/2" x 3/8"
3/4" x 1/2"	1" x 1/2"	1" x 3/4"	1 1/4" x 1/2"
1 1/4" x 3/4"	1 1/4" x 1"	1 1/2" x 1/2"	1 1/2" x 3/4"
1 1/2" x 1"	1 1/2" x 1 1/4"	2" x 1/2"	2" x 3/4"
2" x 1"	2" x 1 1/4"	2" x 1 1/2"	2 1/2" x 1 1/2"
2 1/2" x 2"	3" x 2"	3" x 2 1/2"	4" x 2"
Reducer Bushing, MT x T
839-xxx	3/8" x 1/4"	1/2" x 1/4"	1/2" x 3/8"
3/4" x 1/4"	3/4" x 3/8"	3/4" x 1/2"	1" x 1/4"
1" x 1/2"	1" x 3/4"	1 1/4" x 1/2"	1 1/4" x 3/4"
1 1/4" x 1"	1 1/2" x 3/4"	1 1/2" x 1"	1 1/2" x 1 1/4"
2" x 1/2"	2" x 3/4"	2" x 1"	2" x 1 1/4"
2 1/2" x 2"	3" x 2"	4" x 2"	4" x 3"
Cap, T
848-xxx	1/4" - 4
Plug, MT
850-xxx	1/4" - 4"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. @ Fittings or systems to be installed in accordance with the manufacturer's instructions, ASTM Standard and latest edition of Uniform Plumbing Code. *** -xxx Suffix designates nominal size [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings@ ** +++ [G]*	CPVC	+GF+ or GSR	ASTM F439
Tee, S x S x S
9801-xxx	1/4" - 12"
Reducing Tee, S x S x S
9801-xxx	3/4" x 3/4" x 1/2"	1" x 1" x 1/2"	1" x 1" x 3/4"
1 1/4" x 1 1/4" x 1"	1 1/2" x 1 1/2" x 3/4"	1 1/2" x 1 1/2" x 1"	1 1/2" x 1 1/2" x 1 1/4"
1 1/2" x 1 1/2" x 1 1/2"	2" x 2" x 1/2"	2" x 2" x 3/4"	2" x 2" x 1"
2" x 2" x 1 1/2"	2 1/2" x 2 1/2" x 2"	3" x 3" x 1 1/2"	3" x 3" x 2"
4" x 4" x 2"	4" x 4" x 3"	6" x 4"	8" x 8" x 6"
90° Ell, S x S
9806-xxx	1/4" - 12"
45° Ell, S x S
9817-xxx	1/4" - 12"
Coupling, S x S
9829-xxx	1/4" - 12"
Reducer Coupling, S x S
9829-xxx	1/2" x 3/8"	3/4" x 1/2"	1" x 1/2"
1" x 3/4"	1 1/4" x 3/4"	1 1/2" x 1"	1 1/2" x 1 1/4"
2" x 1"	2" x 1 1/4"	2" x 1 1/2"	2 1/2" x 1 1/2"
3" x 2"	4" x 3"	6" x 4"	8" x 6"
Reducer Bushing, Spg x S
9837-xxx	1/2" x 1/4"	1/2" x 3/8"	3/4" x 1/2"
1" x 1/2"	1" x 3/4"	1 1/4" x 1/2"	1 1/4" x 3/4"
1 1/4" x 1"	1 1/2" x 1/2"	1 1/2" x 3/4"	1 1/2" x 1"
1 1/2" x 1 1/4"	2" x 1/2"	2" x 3/4"	2" x 1"
2" x 1 1/4"	2" x 1 1/2"	2 1/2" x 1 1/2"	2 1/2" x 2"
3" x 1 1/2"	3" x 2"	3" x 2 1/2"	4" x 2"
4" x 3"	6" x 4"	8" x 6"	10" x 6"
10" x 8"	12" x 10"
Cap, S
9847-xxx	3/8" - 12"
@ Fittings or systems to be installed in accordance with the manufacturer's instructions, ASTM Standard and latest edition of Uniform Plumbing Code. *** -xxx Suffix designates nominal size +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings** +++ [G]*	CPVC	+GF+ or GSR	ASTM F437
Tee, T x T x T
9805-xxx	1/4" - 12"
90° Ell, T x T
9808-xxx	1/4" - 12"
90° Ell, S x FPT
9807-XXX	1/2" - 1"
45° Ell, T x T
9819-xxx	1/4" - 12"
Coupling, T x T
9830-xxx	1/4" - 4"
Reducer Coupling, T x T
9830-xxx	1/2" x 1/4"	1/2" x 3/8"	3/4" x 1/2"
1" x 1/2"	1" x 3/4"	1 1/2" x 1"
Female Adapter, S x T
9835-xxx	1/4" - 4"
Male Adapter, S x MT
9836-xxx	1/2" - 4"
Reducer Bushing, Spg x T
9838-xxx	3/8" x 1/4"	1/2" x 1/4"	1/2" x 3/8"
3/4" x 1/4"	3/4" x 1/2"	1" x 1/2"	1" x 3/4"
1 1/4" x 1/2"	1 1/4" x 3/4"	1 1/4" x 1"	1 1/2" x 1/2"
1 1/2" x 3/4"	1 1/2" x 1"	1 1/2" x 1 1/4"	2" x 1/2"
2" x 3/4"	2" x 1"	2" x 1 1/4"	2" x 1 1/2"
2 1/2" x 1 1/2"	2 1/2" x 2"	3" x 2"	4" x 2"
4" x 3"
Reducer Bushing, MT x T
9839-xxx	3/8" x 1/4"	1/2" x 1/4"	1/2" x 3/8"
3/4" x 3/8"	3/4" x 1/2"	1" x 1/2"	1" x 3/4"
1 1/4" x 1"	1 1/2" x 1/2"	1 1/2" x 3/4"	1 1/2" x 1"
1 1/2" x 1 1/4"	2" x 3/4"	2" x 1"	2" x 1 1/4"
2" x 1 1/2"	3" x 2"	4" x 3"
Cap, T
9848-xxx	1/4" - 4"
Plug, MT
9850-xxx	1/4" - 4"
Nipple, MT x MT
9861-xxx	1/4" - 2"
*** -xxx Suffix designates nominal size +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ @ ^ § [G]	PVC	+GF+ or GSR	ASTM D1785
>= 1/2" Sch 80
>= 1/2" Sch 40
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. @ Fittings or systems to be installed in accordance with the manufacturer's instructions, ASTM Standard and latest edition of Uniform Plumbing Code. ^ Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+	PVC	+GF+ or GSR	CSA B137.3
>= 1/2" Sch 40
>= 1/2" Sch 80
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe@ ¢ § +++ [G]	CPVC 4120	+GF+ or GSR	ASTM F441
1/2" - 2", 2 1/2", 3", 4", 6", 8", 10", 12" Sch 40
1/2" - 2", 2 1/2", 3", 4", 6", 8", 10", 12" Sch 80
@ Fittings or systems to be installed in accordance with the manufacturer's instructions, ASTM Standard and latest edition of Uniform Plumbing Code. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	+GF+ or GSR	CSA B137.6
1 1/4" - 2 1/2" Sch 40
1 1/4" - 2 1/2" Sch 80
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings# + [1] [G]	PVC	+GF+	ASTM F1970
Flange - Van Stone (S) Sch 80
1/2" - 12" (854-XXX)
# Product tested for use in 73°F with a rated pressure of 150 psi. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] XXX-indicates size [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings# + [G]	PVC	+GF+	ASTM F1970
Flange - Van Stone (FPT) Sch 80
1/2" - 4" (855-XXX)
Flange - Van Stone (SPG) Sch 80
1/2" - 12" (856-XXX)
# Product tested for use in 73°F with a rated pressure of 150 psi. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings# ++ [G]	MLTPL	+GF+	ASTM F1970
Female Adapters Sch 80
1/2" (868-005ss)	3/4" (868-007ss)	1" (868-010ss)	1 1/4" (868-012ss)
1 1/2" (868-015ss)	2" (868-020ss)
Male Adapters Sch 80
1/2" (869-005ss)	3/4" (869-007ss)	1" (869-010ss)	1 1/4" (869-012ss)
1 1/2" (869-015ss)	2" (869-020ss)
# Product tested for use in 73°F with a rated pressure of 150 psi. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings# +++ [1] [G]	CPVC	+GF+	ASTM F1970
Flange - Van Stone (FPT) Sch 80
1" - 2" (9855-XXX)
Flange - Van Stone (S) Sch 80
1/2" - 12" (9854-XXX)
Flange - Van Stone (SPG) Sch 80
1/2" - 12" (9856-XXX)
# Product tested for use in 73°F with a rated pressure of 150 psi. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] XXX-indicates size [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe@ ¢ +++ [G]	CPVC 4120	ChlorFIT®	ASTM F441
1/2" - 2", 2 1/2", 3", 4", 6", 8", 10", 12" Sch 40
1/2" - 2", 2 1/2", 3", 4", 6", 8", 10", 12" Sch 80
@ Fittings or systems to be installed in accordance with the manufacturer's instructions, ASTM Standard and latest edition of Uniform Plumbing Code. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	ChlorFIT®	CSA B137.6
1 1/4" - 2 1/2" Sch 40
1 1/4" - 2 1/2" Sch 80
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ¢ [G]	PVC	+GF+ Harvel® Industrial*	CSA B137.3
1/2" Sch 40
1/2" Sch 80
3/4" Sch 40
3/4" Sch 80
1" Sch 40
1" Sch 80
1 1/4" Sch 40
1 1/4" Sch 80
1 1/2" Sch 40
1 1/2" Sch 80
2" Sch 40
2" Sch 80
2 1/2" Sch 40
2 1/2" Sch 80
3" Sch 40
3" Sch 80
4" Sch 40
4" Sch 80
5" Sch 80
6" Sch 40
6" Sch 80
8" Sch 40
8" Sch 80
10" Sch 80
12" Sch 40
12" Sch 80
14" Sch 40
14" Sch 80
16" Sch 40
16" Sch 80
20" Sch 40
20" Sch 80
24" Sch 80
* May also be representated by +GF+ Harvel® Industrial PLUS. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings# +++	CPVC	ChlorFIT®	ASTM F1970
1/2 - 1" 90DEG Drop Ear CPVC 80 Transition (SXFPT)
1/2" - 2" Female Adapter Sch 80
1/2" - 2" Male Adapter Sch 80
# Product tested for use in 73°F with a rated pressure of 150 psi. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Pipe+ ¢ [G]	PVC		CSA B137.3
1/2" Sch 40
1/2" Sch 80
3/4" Sch 40
1" Sch 40
1" Sch 80
1 1/4" Sch 40
1 1/4" Sch 80
1 1/2" Sch 40
1 1/2" Sch 80
2" Sch 40
2" Sch 80
2 1/2" Sch 40
2 1/2" Sch 80
3" Sch 40
3" Sch 80
4" Sch 40
4" Sch 80
5" Sch 80
6" Sch 40
6" Sch 80
8" Sch 40
8" Sch 80
10" Sch 80
12" Sch 40
12" Sch 80
14" Sch 40
14" Sch 80
16" Sch 40
16" Sch 80
20" Sch 40
20" Sch 80
24" Sch 80
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings# +++	CPVC	ChlorFIT®	CSA B137.6
1/2 - 1" 90DEG Drop Ear CPVC 80 Transition (SXFPT)
1/2" - 2" Female Adapter Sch 80
1/2" - 2" Male Adapter Sch 80
# Product tested for use in 73°F with a rated pressure of 150 psi. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Fittings@ ** +++ [G]*	CPVC	ChlorFIT®	ASTM F439
45° Ell, S x S
9817-xxx	1/4" - 12"
90° Ell, S x S
9806-xxx	1/4" - 12"
Cap, S
9847-xxx	3/8" - 12"
Coupling, S x S
9829-xxx	1/4" - 12"
Reducer Bushing, Spg x S
9837-xxx	1/2" x 1/4"	1/2" x 3/8"	3/4" x 1/2"
1" x 1/2"	1" x 3/4"	1 1/4" x 1/2"	1 1/4" x 3/4"
1 1/4" x 1"	1 1/2" x 1/2"	1 1/2" x 3/4"	1 1/2" x 1"
1 1/2" x 1 1/4"	2" x 1/2"	2" x 3/4"	2" x 1"
2" x 1 1/4"	2" x 1 1/2"	2 1/2" x 1 1/2"	2 1/2" x 2"
3" x 1 1/2"	3" x 2"	3" x 2 1/2"	4" x 2"
4" x 3"	6" x 4"	8" x 6"	10" x 6"
Reducer Coupling, S x S
9829-xxx	1/2" x 3/8"	3/4" x 1/2"	1" x 1/2"
1" x 3/4"	1 1/4" x 3/4"	1 1/2" x 1"	1 1/2" x 1 1/4"
2" x 1"	2" x 1 1/4"	2" x 1 1/2"	2 1/2" x 1 1/2"
3" x 2"	4" x 3"	6" x 4"	8" x 6"
Reducing Tee, S x S x S
9801-xxx	3/4" x 3/4" x 1/2"	1" x 1" x 1/2"	1" x 1" x 3/4"
1 1/4" x 1 1/4" x 1"	1 1/2" x 1 1/2" x 3/4"	1 1/2" x 1 1/2" x 1"	1 1/2" x 1 1/2" x 1 1/4"
1 1/2" x 1 1/2" x 1 1/2"	2" x 2" x 1/2"	2" x 2" x 3/4"	2" x 2" x 1"
2" x 2" x 1 1/2"	2 1/2" x 2 1/2" x 2"	3" x 3" x 1 1/2"	3" x 3" x 2"
4" x 4" x 2"	4" x 4" x 3"	6" x 4"	8" x 8" x 6"
Tee, S x S x S
9801-xxx	1/4" - 12"
@ Fittings or systems to be installed in accordance with the manufacturer's instructions, ASTM Standard and latest edition of Uniform Plumbing Code. *** -xxx Suffix designates nominal size +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings** +++ [G]*	CPVC	ChlorFIT®	ASTM F437
45° Ell, T x T
9819-xxx	1/4" - 12"
90° Ell, S x FPT
9807-XXX	1/2" - 1"
90° Ell, T x T
9808-xxx	1/4" - 12"
Cap, T
9848-xxx	1/4" - 4"
Coupling, T x T
9830-xxx	1/4" - 4"
Female Adapter, S x T
9835-xxx	1/4" - 4"
Male Adapter, S x MT
9836-xxx	1/2" - 4"
Nipple, MT x MT
9861-xxx	1/4" - 2"
Plug, MT
1/4" - 4"	9850-xxx
Reducer Bushing, MT x T
9839-xxx	3/8" x 1/4"	1/2" x 1/4"	1/2" x 3/8"
3/4" x 3/8"	3/4" x 1/2"	1" x 1/2"	1" x 3/4"
1 1/4" x 1"	1 1/2" x 1/2"	1 1/2" x 3/4"	1 1/2" x 1"
1 1/2" x 1 1/4"	2" x 3/4"	2" x 1"	2" x 1 1/4"
2" x 1 1/2"	3" x 2"	4" x 3"
Reducer Bushing, Spg x T
9838-xxx	3/8" x 1/4"	1/2" x 1/4"	1/2" x 3/8"
3/4" x 1/4"	3/4" x 1/2"	1" x 1/2"	1" x 3/4"
1 1/4" x 1/2"	1 1/4" x 3/4"	1 1/4" x 1"	1 1/2" x 1/2"
1 1/2" x 3/4"	1 1/2" x 1"	1 1/2" x 1 1/4"	2" x 1/2"
2" x 3/4"	2" x 1"	2" x 1 1/4"	2" x 1 1/2"
2 1/2" x 1 1/2"	2 1/2" x 2"	3" x 2"	4" x 2"
4" x 3"
Reducer Coupling, T x T
9830-xxx	1/2" x 1/4"	1/2" x 3/8"	3/4" x 1/2"
1" x 1/2"	1" x 3/4"	1 1/2" x 1"
Tee, T x T x T
9805-xxx	1/4" - 12"
*** -xxx Suffix designates nominal size +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe@ ¢ +++ [G]	CPVC 4120	SeaCor®	ASTM F441
1/2" - 2", 2 1/2", 3", 4", 6", 8", 10", 12" Sch 40
1/2" - 2", 2 1/2", 3", 4", 6", 8", 10", 12" Sch 80
@ Fittings or systems to be installed in accordance with the manufacturer's instructions, ASTM Standard and latest edition of Uniform Plumbing Code. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings** +++ [G]*	CPVC	SeaCor®	ASTM F437
45° Ell, T x T
9819-xxx	1/4" - 12"
90° Ell, S x FPT
9807-XXX	1/2" - 1"
90° Ell, T x T
9808-xxx	1/4" - 12"
Cap, T
9848-xxx	1/4" - 4"
Coupling, T x T
9830-xxx	1/4" - 4"
Female Adapter, S x T
9835-xxx	1/4" - 4"
Male Adapter, S x MT
9836-xxx	1/2" - 4"
Nipple, MT x MT
9861-xxx	1/4" - 2"
Plug, MT
9850-xxx	1/4" - 4"
Reducer Bushing, MT x T
9839-xxx	3/8" x 1/4"	1/2" x 1/4"	1/2" x 3/8"
3/4" x 3/8"	3/4" x 1/2"	1" x 1/2"	1" x 3/4"
1 1/4" x 1"	1 1/2" x 1/2"	1 1/2" x 3/4"	1 1/2" x 1"
1 1/2" x 1 1/4"	2" x 3/4"	2" x 1"	2" x 1 1/4"
2" x 1 1/2"	3" x 2"	4" x 3"
Reducer Bushing, Spg x T
9838-xxx	3/8" x 1/4"	1/2" x 1/4"	1/2" x 3/8"
3/4" x 1/4"	3/4" x 1/2"	1" x 1/2"	1" x 3/4"
1 1/4" x 1/2"	1 1/4" x 3/4"	1 1/4" x 1"	1 1/2" x 1/2"
1 1/2" x 3/4"	1 1/2" x 1"	1 1/2" x 1 1/4"	2" x 1/2"
2" x 3/4"	2" x 1"	2" x 1 1/4"	2" x 1 1/2"
2 1/2" x 1 1/2"	2 1/2" x 2"	3" x 2"	4" x 2"
4" x 3"
Reducer Coupling, T x T
9830-xxx	1/2" x 1/4"	1/2" x 3/8"	3/4" x 1/2"
1" x 1/2"	1" x 3/4"	1 1/2" x 1"
Tee, T x T x T
9805-xxx	1/4" - 12"
*** -xxx Suffix designates nominal size +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings@ ** +++ [G]*	CPVC	SeaCor®	ASTM F439
45° Ell, S x S
9817-xxx	1/4" - 12"
90° Ell, S x S
9806-xxx	1/4" - 12"
Cap, S
9847-xxx	3/8" - 12"
Coupling, S x S
9829-xxx	1/4" - 12"
Reducer Bushing, Spg x S
9837-xxx	1/2" x 1/4"	1/2" x 3/8"	3/4" x 1/2"
1" x 1/2"	1" x 3/4"	1 1/4" x 1/2"	1 1/4" x 3/4"
1 1/4" x 1"	1 1/2" x 1/2"	1 1/2" x 3/4"	1 1/2" x 1"
1 1/2" x 1 1/4"	2" x 1/2"	2" x 3/4"	2" x 1"
2" x 1 1/4"	2" x 1 1/2"	2 1/2" x 1 1/2"	2 1/2" x 2"
3" x 1 1/2"	3" x 2"	3" x 2 1/2"	4" x 2"
4" x 3"	6" x 4"	8" x 6"	10" x 6"
Reducer Coupling, S x S
9829-xxx	1/2" x 3/8"	3/4" x 1/2"	1" x 1/2"
1" x 3/4"	1 1/4" x 3/4"	1 1/2" x 1"	1 1/2" x 1 1/4"
2" x 1"	2" x 1 1/4"	2" x 1 1/2"	2 1/2" x 1 1/2"
3" x 2"	4" x 3"	6" x 4"	8" x 6"
Reducing Tee, S x S x S
9801-xxx	3/4" x 3/4" x 1/2"	1" x 1" x 1/2"	1" x 1" x 3/4"
1 1/4" x 1 1/4" x 1"	1 1/2" x 1 1/2" x 3/4"	1 1/2" x 1 1/2" x 1"	1 1/2" x 1 1/2" x 1 1/4"
1 1/2" x 1 1/2" x 1 1/2"	2" x 2" x 1/2"	2" x 2" x 3/4"	2" x 2" x 1"
2" x 2" x 1 1/2"	2 1/2" x 2 1/2" x 2"	3" x 3" x 1 1/2"	3" x 3" x 2"
4" x 4" x 2"	4" x 4" x 3"	6" x 4"	8" x 8" x 6"
Tee, S x S x S
9801-xxx	1/4" - 12"
@ Fittings or systems to be installed in accordance with the manufacturer's instructions, ASTM Standard and latest edition of Uniform Plumbing Code. *** -xxx Suffix designates nominal size +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	SeaCor®	CSA B137.6
1 1/4" - 2 1/2" Sch 40
1 1/4" - 2 1/2" Sch 80
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings# +++	CPVC	SeaCor®	ASTM F1970
1/2 - 1" 90DEG Drop Ear CPVC 80 Transition (SXFPT)
1/2" - 2" Female Adapter Sch 80
1/2" - 2" Male Adapter Sch 80
# Product tested for use in 73°F with a rated pressure of 150 psi. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Fittings# +++	CPVC	SeaCor®	CSA B137.6
1/2 - 1" 90DEG Drop Ear CPVC 80 Transition (SXFPT)
1/2" - 2" Female Adapter Sch 80
1/2" - 2" Male Adapter Sch 80
# Product tested for use in 73°F with a rated pressure of 150 psi. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Pipe+++ [G]	CPVC 4120	+GF+ Uponor ChlorFIT®	ASTM F441
1/4" - 12" Sch 80
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	+GF+ Uponor ChlorFIT®	CSA B137.6
1 1/4" - 2 1/2" Sch 80
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings** +++ [G]*	CPVC	+GF+ Uponor ChlorFIT®	ASTM F437
Tee, T x T x T
9805-xxx	1/4" - 12"
90° Ell, T x T
9808-xxx	1/4" - 12"
90° Ell, S x FPT
9807-XXX	1/2" - 1"
45° Ell, T x T
9819-xxx	1/4" - 12"
Coupling, T x T
9830-xxx	1/4" - 4"
Reducer Coupling, T x T
9830-xxx	1/2" x 1/4"	1/2" x 3/8"	3/4" x 1/2"
1" x 1/2"	1" x 3/4"	1 1/2" x 1"
Female Adapter, S x T
9835-xxx	1/4" - 4"
Male Adapter, S x MT
9836-xxx	1/2" - 4"
Reducer Bushing, Spg x T
9838-xxx	3/8" x 1/4"	1/2" x 1/4"	1/2" x 3/8"
3/4" x 1/4"	3/4" x 1/2"	1" x 1/2"	1" x 3/4"
1 1/4" x 1/2"	1 1/4" x 3/4"	1 1/4" x 1"	1 1/2" x 1/2"
1 1/2" x 3/4"	1 1/2" x 1"	1 1/2" x 1 1/4"	2" x 1/2"
2" x 3/4"	2" x 1"	2" x 1 1/4"	2" x 1 1/2"
2 1/2" x 1 1/2"	2 1/2" x 2"	3" x 2"	4" x 2"
4" x 3"
Reducer Bushing, MT x T
9839-xxx	3/8" x 1/4"	1/2" x 1/4"	1/2" x 3/8"
3/4" x 3/8"	3/4" x 1/2"	1" x 1/2"	1" x 3/4"
1 1/4" x 1"	1 1/2" x 1/2"	1 1/2" x 3/4"	1 1/2" x 1"
1 1/2" x 1 1/4"	2" x 3/4"	2" x 1"	2" x 1 1/4"
2" x 1 1/2"	3" x 2"	4" x 3"
Cap, T
9848-xxx	1/4" - 4"
Plug, MT
9850-xxx	1/4" - 4"
Nipple, MT x MT
9861-xxx	1/4" - 2"
*** -xxx Suffix designates nominal size +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings@ ** +++ [G]*	CPVC	+GF+ Uponor ChlorFIT®	ASTM F439
Tee, S x S x S
9801-xxx	1/4" - 12"
Reducing Tee, S x S x S
9801-xxx	3/4" x 3/4" x 1/2"	1" x 1" x 1/2"	1" x 1" x 3/4"
1 1/4" x 1 1/4" x 1"	1 1/2" x 1 1/2" x 3/4"	1 1/2" x 1 1/2" x 1"	1 1/2" x 1 1/2" x 1 1/4"
1 1/2" x 1 1/2" x 1 1/2"	2" x 2" x 1/2"	2" x 2" x 3/4"	2" x 2" x 1"
2" x 2" x 1 1/2"	2 1/2" x 2 1/2" x 2"	3" x 3" x 1 1/2"	3" x 3" x 2"
4" x 4" x 2"	4" x 4" x 3"	6" x 4"	8" x 8" x 6"
90° Ell, S x S
9806-xxx	1/4" - 12"
45° Ell, S x S
9817-xxx	1/4" - 12"
Coupling, S x S
9829-xxx	1/4" - 12"
Reducer Coupling, S x S
9829-xxx	1/2" x 3/8"	3/4" x 1/2"	1" x 1/2"
1" x 3/4"	1 1/4" x 3/4"	1 1/2" x 1"	1 1/2" x 1 1/4"
2" x 1"	2" x 1 1/4"	2" x 1 1/2"	2 1/2" x 1 1/2"
3" x 2"	4" x 3"	6" x 4"	8" x 6"
Reducer Bushing, Spg x S
9837-xxx	1/2" x 1/4"	1/2" x 3/8"	3/4" x 1/2"
1" x 1/2"	1" x 3/4"	1 1/4" x 1/2"	1 1/4" x 3/4"
1 1/4" x 1"	1 1/2" x 1/2"	1 1/2" x 3/4"	1 1/2" x 1"
1 1/2" x 1 1/4"	2" x 1/2"	2" x 3/4"	2" x 1"
2" x 1 1/4"	2" x 1 1/2"	2 1/2" x 1 1/2"	2 1/2" x 2"
3" x 1 1/2"	3" x 2"	3" x 2 1/2"	4" x 2"
4" x 3"	6" x 4"	8" x 6"	10" x 6"
10" x 8"	12" x 10"
Cap, S
9847-xxx	3/8" - 12"
@ Fittings or systems to be installed in accordance with the manufacturer's instructions, ASTM Standard and latest edition of Uniform Plumbing Code. *** -xxx Suffix designates nominal size +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings# +++	CPVC	+GF+ Uponor ChlorFIT®	ASTM F1970
1/2 - 1" 90DEG Drop Ear CPVC 80 Transition (SXFPT)
1/2" - 2" Female Adapter Sch 80
1/2" - 2" Male Adapter Sch 80
# Product tested for use in 73°F with a rated pressure of 150 psi. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Fittings# ¢ +++	CPVC	+GF+ Uponor ChlorFIT®	CSA B137.6
1/2 - 1" 90DEG Drop Ear CPVC 80 Transition (SXFPT)
1/2" - 2" Female Adapter Sch 80
1/2" - 2" Male Adapter Sch 80
# Product tested for use in 73°F with a rated pressure of 150 psi. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).

% CPVC High PSI/Temp Flange Kit (S)
## All products tested for use in 73F as per the specific rated pressures per size

Facility : Bakersfield, CA

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe*	PVC	+GF+ Harvel® Industrial PLUS	ASTM D2665
1 1/4" - 24" Sch 40
* Sockets and gasketed bell ends are not tested or Listed by NSF International for this production facility.
Pipe*	PVC	+GF+ HARVEL PVC	ASTM D2665
1 1/4" - 24" Sch 40
* Sockets and gasketed bell ends are not tested or Listed by NSF International for this production facility.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe + [G]*	PVC	+GF+ HARVEL PVC	ASTM D1785
1/8" - 24" Sch 40
1/8" - 24" Sch 80
1/2" - 8" Sch 120
* Sockets and gasketed bell ends are not tested or Listed by NSF International for this production facility. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + [G]*	PVC	+GF+ Harvel® Industrial	ASTM D1785
1/8" - 24" Sch 40
1/8" - 24" Sch 80
* Sockets and gasketed bell ends are not tested or Listed by NSF International for this production facility. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + [G]*	PVC	+GF+ Harvel® Industrial PLUS	ASTM D1785
1/8" - 24" Sch 40
1/8" - 24" Sch 80
* Sockets and gasketed bell ends are not tested or Listed by NSF International for this production facility. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + [G]*	PVC		ASTM D1785
1/2" - 8" Sch 120
* Sockets and gasketed bell ends are not tested or Listed by NSF International for this production facility. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + [G]*	PVC	+GF+ HARVEL PVC	ASTM D2241
1/2" SDR 13.5
3/4" - 10" SDR 21
1" - 24" SDR 26
18" SDR 41
20" SDR 41
24" SDR 41
* Sockets and gasketed bell ends are not tested or Listed by NSF International for this production facility. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + [G]*	PVC		ASTM D2241
1/2" SDR 13.5
3/4" - 10" SDR 21
1" - 24" SDR 26
18" SDR 41
20" SDR 41
24" SDR 41
* Sockets and gasketed bell ends are not tested or Listed by NSF International for this production facility. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ¢ [G]	PVC	+GF+ Harvel® Industrial	CSA B137.3
1/2" - 20" Sch 40
1/2" - 24" Sch 80
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ¢ [G]	PVC	+GF+ Harvel® Industrial PLUS	CSA B137.3
1/2" - 20" Sch 40
1/2" - 24" Sch 80
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ¢ [G]	PVC	+GF+ HARVEL PVC	CSA B137.3
1/2" - 24" Sch 40
1/2" - 24" Sch 80
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ¢ [G]	PVC		CSA B137.3
1/2" - 24" Sch 40
1/2" - 24" Sch 80
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120	ChlorFIT®	ASTM F441
1/4" - 24" Sch 80
1/4" - 24" Sch 40
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120	+GF+ HARVEL CPVC	ASTM F441
1/4" - 24" Sch 40
1/4" - 24" Sch 80
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120	+GF+ Uponor ChlorFIT®	ASTM F441
1/4" - 24" Sch 80
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120		ASTM F441
1/4" - 24" Sch 40
1/4" - 24" Sch 80
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	SeaCor®	ASTM F441
1/4" - 24" Sch 40
1/4" - 24" Sch 80
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	ChlorFIT®	CSA B137.6
3/8" - 2" SDR 11
1 1/4" - 2 1/2" Sch 80
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	+GF+ HARVEL CPVC	CSA B137.6
3/8" - 2" SDR 11
1 1/4" - 2 1/2" Sch 80
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	+GF+ Uponor ChlorFIT®	CSA B137.6
1 1/4" - 2 1/2" Sch 80
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120		CSA B137.6
3/8" - 2" SDR 11
1 1/4 - 2 1/2" Sch 80
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	SeaCor®	CSA B137.6
3/8" - 2" SDR 11
1 1/4" - 2 1/2" Sch 80
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120	+GF+ HARVEL BLAZEMASTER®	ASTM F442
3/4" - 3" SDR 13.5
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	+GF+ HydroKing Commercial	ASTM F442
2 1/2" - 8" SDR 11
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120		ASTM F442
3/4" - 3" SDR 13.5
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	+GF+ HydroKing Commercial	CSA B137.6
1 1/4" - 2 1/2" Sch 80
2 1/2" - 4" SDR 11
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Facility : Irvine, CA

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe*	PVC	+GF+ Harvel® Industrial	ASTM D2665
1 1/4" - 24" Sch 40
* Sockets and gasketed bell ends are not tested or Listed by NSF International for this production facility.
Pipe*	PVC	+GF+ Harvel® Industrial PLUS	ASTM D2665
1 1/4" - 24" Sch 40
* Sockets and gasketed bell ends are not tested or Listed by NSF International for this production facility.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name		Product Standard
Pipe	CPVC 4120	+GF+ HARVEL CPVC		ASTM D2846
3/8" - 2" SDR 11
Pipe+++ [G]	CPVC 4120		SE 8459a
1/4" - 8" Sch 40
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120	+GF+ HARVEL BLAZEMASTER®		ASTM F442
3/4" - 3" SDR 13.5
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe	CPVC 4120			ASTM D2846
3/8" - 2" SDR 11
Pipe	CPVC 4120	HARVEL CPVC		ASTM D2846
3/8" - 2" SDR 11
Pipe+++ [G]	CPVC 4120	+GF+ Harvel CPVC	SE 8459a
1/4" - 8" Sch 40
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120		SE 8459a
1/4" - 8" Sch 80
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120	+GF+ Harvel CPVC	SE 8459a
1/4" - 8" Sch 80
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + [G]*	PVC	+GF+ HARVEL PVC		ASTM D1785
1/8" - 24" Sch 40
1/8" - 24" Sch 80
1/2" - 8" Sch 120
* Sockets and gasketed bell ends are not tested or Listed by NSF International for this production facility. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + [G]*	PVC			ASTM D1785
1/8" - 24" Sch 40
1/8" - 24" Sch 80
1/2" - 8" Sch 120
* Sockets and gasketed bell ends are not tested or Listed by NSF International for this production facility. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + [G]*	PVC	+GF+ HARVEL PVC		ASTM D2241
1/2" SDR 13.5
3/4" - 10" SDR 21
1"- 24" SDR 26
18" SDR 41
20" SDR 41
24" SDR 41
* Sockets and gasketed bell ends are not tested or Listed by NSF International for this production facility. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + [G]*	PVC			ASTM D2241
1/2" SDR 13.5
3/4" - 10" SDR 21
1" - 24" SDR 26
18" SDR 41
20" SDR 41
24" SDR 41
* Sockets and gasketed bell ends are not tested or Listed by NSF International for this production facility. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ¢ [G]	PVC	+GF+ HARVEL PVC		CSA B137.3
1/2" Sch 40
1/2" Sch 80
3/4" Sch 40
3/4" Sch 80
1" Sch 40
1" Sch 80
1 1/4" Sch 40
1 1/4" Sch 80
1 1/2" Sch 40
1 1/2" Sch 80
2" Sch 40
2" Sch 80
2 1/2" Sch 40
2 1/2" Sch 80
3" Sch 40
3" Sch 80
4" Sch 40
4" Sch 80
5" Sch 80
6" Sch 40
6" Sch 80
8" Sch 40
8" Sch 80
10" Sch 80
12" Sch 40
12" Sch 80
14" Sch 40
14" Sch 80
16" Sch 40
16" Sch 80
20" Sch 40
20" Sch 80
24" Sch 80
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ¢ [G]	PVC			CSA B137.3
1/2" Sch 40
1/2" Sch 80
3/4" Sch 40
3/4" Sch 80
1" Sch 40
1" Sch 80
1 1/4" Sch 40
1 1/4" Sch 80
1 1/2" Sch 40
1 1/2" Sch 80
2" Sch 40
2" Sch 80
2 1/2" Sch 40
2 1/2" Sch 80
3" Sch 40
3" Sch 80
4" Sch 40
4" Sch 80
5" Sch 80
6" Sch 40
6" Sch 80
8" Sch 40
8" Sch 80
10" Sch 80
12" Sch 40
12" Sch 80
14" Sch 40
14" Sch 80
16" Sch 40
16" Sch 80
20" Sch 40
20" Sch 80
24" Sch 80
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + [G]*	PVC	+GF+ Harvel® Industrial		ASTM D1785
1/8" - 24" Sch 40
1/8" - 24" Sch 80
* Sockets and gasketed bell ends are not tested or Listed by NSF International for this production facility. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + [G]*	PVC	+GF+ Harvel® Industrial PLUS		ASTM D1785
1/8" - 24" Sch 40
1/8" - 24" Sch 80
* Sockets and gasketed bell ends are not tested or Listed by NSF International for this production facility. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ¢ [G]	PVC	+GF+ Harvel® Industrial		CSA B137.3
1/2" - 20" Sch 40
1/2" - 24" Sch 80
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ¢ [G]	PVC	+GF+ Harvel® Industrial PLUS		CSA B137.3
1/2" - 20" Sch 40
1/2" - 24" Sch 80
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120			ASTM D2846
3/8" - 2" SDR 11
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	+GF+ HARVEL CPVC		CSA B137.6
3/8" - 2" SDR 11
1 1/4" - 2 1/2" Sch 80
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120	Chlorfit		ASTM D2846
3/8" - 2" SDR 11
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120	Chlorfit		ASTM F442
3/4" - 3" SDR 13.5
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	ChlorFIT®		CSA B137.6
3/8" - 2" SDR 11
1 1/4" - 2 1/2" Sch 80
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120	ChlorFIT®		ASTM F441
1/4" - 24" Sch 40
1/4" - 24" Sch 80
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120			CSA B137.6
3/8" - 2" SDR 11
1 1/4" - 2 1/2" Sch 80
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120	+GF+ HARVEL CPVC		ASTM F441
1/4" - 24" Sch 40
1/4" - 24" Sch 80
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120			ASTM F441
1/4" - 24" Sch 40
1/4" - 24" Sch 80
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120			ASTM F442
3/4" - 3" SDR 13.5
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	+GF+ HydroKing Commercial		ASTM F442
2 1/2" - 8" SDR 11
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	+GF+ HydroKing Commercial		CSA B137.6
1 1/4" - 2 1/2" Sch 80
2 1/2" - 4" SDR 11
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120	+GF+ CTS		ASTM D2846
3/8" - 2" SDR 11
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	SeaCor®		CSA B137.6
3/8" - 2" SDR 11
1 1/4" - 2 1/2" Sch 80
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	+GF+ CTS		CSA B137.6
3/8" - 2" SDR 11
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120	SeaCor®		ASTM F441
1/4" - 24" Sch 40
1/4" - 24" Sch 80
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Well Casings

Product Type	Material Type	Trade Name	Product Standard
Well Casings**	PVC	HARVEL PVC	ASTM F480
2" - 16" Sch 40
2" - 16" Sch 80
2" - 16" SDR 17
2" - 10" SDR 21
4" - 16" SDR 26
** Sockets and gasketed bell-ends are not tested or Certified by NSF International for this production facility.
Well Casings**	PVC		ASTM F480
2" - 16" Sch 40
2" - 16" Sch 80
2" - 16" SDR 17
2" - 10" SDR 21
4" - 16" SDR 26
** Sockets and gasketed bell-ends are not tested or Certified by NSF International for this production facility.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Facility : Easton, PA

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe*	PVC	+GF+ Harvel® Industrial	ASTM D2665
1 1/4" - 24" Sch 40
* Sockets and gasketed bell ends are not tested or Listed by NSF International for this production facility.
Pipe*	PVC	+GF+ Harvel® Industrial PLUS	ASTM D2665
1 1/4" - 24" Sch 40
* Sockets and gasketed bell ends are not tested or Listed by NSF International for this production facility.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe + [G]*	PVC	+GF+ Harvel® Industrial	ASTM D1785
1/8" - 24" Sch 40
1/8" - 24" Sch 80
* Sockets and gasketed bell ends are not tested or Listed by NSF International for this production facility. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + [G]*	PVC	+GF+ Harvel® Industrial PLUS	ASTM D1785
1/8" - 24" Sch 40
1/8" - 24" Sch 80
* Sockets and gasketed bell ends are not tested or Listed by NSF International for this production facility. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + [G]*	PVC	+GF+ HARVEL PVC	ASTM D1785
1/8" - 24" Sch 40
1/8" - 24" Sch 80
1/2" - 8" Sch 120
* Sockets and gasketed bell ends are not tested or Listed by NSF International for this production facility. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + [G]*	PVC		ASTM D1785
1/2" - 8" Sch 120
* Sockets and gasketed bell ends are not tested or Listed by NSF International for this production facility. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + [G]*	PVC	+GF+ HARVEL PVC	ASTM D2241
1/2" SDR 13.5
3/4" - 10" SDR 21
1"- 24" SDR 26
18" SDR 41
20" SDR 41
24" SDR 41
* Sockets and gasketed bell ends are not tested or Listed by NSF International for this production facility. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + [G]*	PVC		ASTM D2241
1/2" SDR 13.5
3/4" - 10" SDR 21
1" - 24" SDR 26
18" SDR 41
20" SDR 41
24" SDR 41
* Sockets and gasketed bell ends are not tested or Listed by NSF International for this production facility. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ¢ [G]	PVC	+GF+ Harvel® Industrial	CSA B137.3
1/2" - 24" Sch 80
1/2" - 20" Sch 40
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ¢ [G]	PVC	+GF+ Harvel® Industrial PLUS	CSA B137.3
1/2" - 20" Sch 40
1/2" - 24" Sch 80
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ¢ [G]	PVC	+GF+ HARVEL PVC	CSA B137.3
1/2" - 24" Sch 40
1/2" - 24" Sch 80
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ¢ [G]	PVC		CSA B137.3
1/2" - 24" Sch 40
1/2" - 24" Sch 80
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	+GF+ HydroKing Commercial	ASTM F442
2 1/2" - 8" SDR 11
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	+GF+ HydroKing Commercial	CSA B137.6
1 1/4" - 2 1/2" Sch 80
2 1/2" - 4" SDR 11
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120	ChlorFIT®	ASTM F441
1/4" - 24" Sch 40
1/4" - 24" Sch 80
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120	+GF+ HARVEL CPVC	ASTM F441
1/4" - 24" Sch 40
1/4" - 24" Sch 80
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120	+GF+ Uponor ChlorFIT®	ASTM F441
1/4" - 24" Sch 80
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120		ASTM F441
1/4" - 24" Sch 40
1/4" - 24" Sch 80
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120	SeaCor®	ASTM F441
1/4" - 24" Sch 40
1/4" - 24" Sch 80
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120		ASTM F442
3/4" - 3" SDR 13.5
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	ChlorFIT®	CSA B137.6
3/8" - 2" SDR 11
1 1/4" - 2 1/2" Sch 80
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	+GF+ HARVEL CPVC	CSA B137.6
3/8" - 2" SDR 11
1 1/4" - 2 1/2" Sch 80
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	+GF+ Uponor ChlorFIT®	CSA B137.6
1 1/4" - 2 1/2" Sch 80
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120		CSA B137.6
3/8" - 2" SDR 11
1 1/4" - 2 1/2" Sch 80
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	SeaCor®	CSA B137.6
3/8" - 2" SDR 11
1 1/4" - 2 1/2" Sch 80
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Well Casings

Product Type	Material Type	Trade Name	Product Standard
Well Casings* [G]*	PVC	HARVEL PVC	ASTM F480
2" - 16" Sch 40
2" - 16" Sch 80
2" - 16" SDR 17
2" - 10" SDR 21
4" - 16" SDR 26
** Sockets and gasketed bell-ends are not tested or Certified by NSF International for this production facility. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Well Casings* [G]*	PVC		ASTM F480
2" - 16" Sch 40
2" - 16" Sch 80
2" - 16" SDR 17
2" - 10" SDR 21
4" - 16" SDR 26
** Sockets and gasketed bell-ends are not tested or Certified by NSF International for this production facility. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Number of matching Manufacturers is 1
Number of matching Products is 2917
Processing time was 1 seconds

NSF Product and Service Listings

Did you know?

Connect with NSF