NSF Product and Service Listings
These NSF Official Listings are current as of Friday, January 30, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?Company=23500&Standard=014&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| Pacific Plastics, Inc. | |
| 111 South Berry Street | |
| Brea, CA 92821 | |
| United States | |
| 714-990-9050 |
Facility : Brea, CA
Drain, Waste, and Vent - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe§ [1] |
PVC |
Pacific Plastics |
ASTM D2665 |
|||
| 1 1/4" - 12" | ||||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[1] Sockets and gasketed bell ends are not tested or Listed by NSF International for this
production facility.
|
||||||
Electrical Conduit and Accessories
| Product Type | Material Type | Trade Name | Product Standard | |||
Rigid Conduit* |
PVC |
Pacific Plastics |
UL 651 |
|||
| ½", ¾", 1", 1¼", 1½", 2", 2½", 3", 3½", 4", 5", 6" Sch 40 | ||||||
| ½", ¾", 1", 1¼", 1½", 2", 2½", 3", 3½", 4", 5", 6" Sch 80 | ||||||
* Complies with requirements for above ground, underground, or indoor use; sunlight resistance and use with maximum 90°C wire. |
||||||
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ § [1] [G] |
PVC |
Solar Proof |
ASTM D1785 |
|||
| 1/2" - 6" Sch 40 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[1] Sockets and gasketed bell ends are not tested or Listed by NSF International for this
production facility.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ § [1] [G] |
PVC |
Pacific Plastics |
ASTM D1785 |
|||
| 1/2" - 12" Sch 40 | ||||||
| 1/2" - 12" Sch 80 | ||||||
| 1" Sch 120 | ||||||
| 1 1/4" Sch 120 | ||||||
| 1 1/2" Sch 120 | ||||||
| 3" Sch 120 | ||||||
| 4" Sch 120 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[1] Sockets and gasketed bell ends are not tested or Listed by NSF International for this
production facility.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ § [1] [G] |
PVC |
Pacific Plastics |
ASTM D2241 |
|||
| 3/4" - 12" SDR 21 | ||||||
| 1/2" - 6" SDR 13.5 | ||||||
| 1 1/4" - 12" SDR 26 | ||||||
| 1 1/4" - 12" SDR 32.5 | ||||||
| 3" - 12" SDR 41 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[1] Sockets and gasketed bell ends are not tested or Listed by NSF International for this
production facility.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Reclaimed Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe§ [1] |
PVC |
Cycle Flow |
ASTM D1785 |
|||
| 1/2" - 12" Sch 40 | ||||||
| 1/2" - 12" Sch 80 | ||||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[1] Sockets and gasketed bell ends are not tested or Listed by NSF International for this
production facility.
|
||||||
Pipe§ [1] |
PVC |
Pacific Plastics |
ASTM D1785 |
|||
| 1/2" - 12" Sch 40 | ||||||
| 1/2" - 12" Sch 80 | ||||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[1] Sockets and gasketed bell ends are not tested or Listed by NSF International for this
production facility.
|
||||||
Pipe§ [1] |
PVC |
Cycle Flow |
ASTM D2241 |
|||
| 1/2" - 12" Sch 40 | ||||||
| 1/2" - 12" Sch 80 | ||||||
| 1/2" - 6" SDR 13.5 | ||||||
| 3/4" - 12" SDR 21 | ||||||
| 1 1/4" - 12" SDR 26 | ||||||
| 1 1/4" - 12" SDR 32.5 | ||||||
| 3" - 12" SDR 41 | ||||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[1] Sockets and gasketed bell ends are not tested or Listed by NSF International for this
production facility.
|
||||||
Sewer Main - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe§ |
PVC |
Pacific Plastics |
ASTM D3034 |
|||
|
Gasketed, Green |
||||||
| 4", 6", 8", 10", 12", 15" SDR 35 | ||||||
|
Solvent-Weld, White |
||||||
| 3", 4", 6", 8" SDR 35 | ||||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Number of matching Manufacturers is 1
Number of matching Products is 29
Processing time was 0 seconds
