NSF Product and Service Listings

NSF Product and Service Listings

Did you know?

Connect with NSF

These NSF Official Listings are current as of Tuesday, May 13, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?Company=32680&Standard=014&

NSF/ANSI 14
Plastics Piping System Components and Related Materials

Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document

IPEX Incorporated
3 Place Du Commerce, Suite 101
Île-Des-Soeurs
Verdun, QC H3E 1H7
Canada
514-769-2200
Visit this company's website

Facility : Edmonton, Alberta, Canada

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe	PVC	IPEX INC@	ASTM D2665
1 1/4" - 24" Sch 40
@ This pipe product is also represented by the trade name Blue Brute/Brute Bleue, Centurion, Cycle Tough, Fusible Brute/Brute Fusionnée, or Xirtec PVC.

NOTE: Only products bearing the NSF Mark are NSF Certified.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [1] [G]	PVCO	BIONAX	AWWA C909
14" - 30" CIOD (PC 165, 235, 305)
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] This pipe product is also represented by the trade name IPEX PVCO. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ¢ [1] [2] [G]	PVCO	BIONAX	CSA B137.3.1
14" - 30" CIOD (PR 2130, 1620, 1150)
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] This pipe product is also represented by the trade name IPEX PVCO. [2] Technical Information Letter CSA MSE-63 defines dimensional requirements for sizes larger than 24 inches. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PVC	IPEX INC@	ASTM D1785
1/2" - 24" Sch 80
1/2" - 24" Sch 40
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. @ This pipe product is also represented by the trade name Blue Brute/Brute Bleue, Centurion, Cycle Tough, Fusible Brute/Brute Fusionnée, or Xirtec PVC. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [3] [G]	PVC	TerraBrute@	AWWA C900
14" - 24" DR 18
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. @ This pipe product is also represented by the trade name Blue Brute/Brute Bleue, Centurion, Cycle Tough, Fusible Brute/Brute Fusionnée, or Xirtec PVC. [3] The TerraBrute potable water pipe is blue. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark are NSF Certified.

Sewer Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe[1]	PVC	TerraBrute	AWWA C900
14" - 24" DR 14
[1] The TerraBrute sewer pipe may be green or white.

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
PVC+ [G]	1	S907	ASTM D1784 12454
PVC+ [G]	1	S1007	ASTM D1784 12454
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark are NSF Certified.

Facility : Edmonton, Alberta, Canada

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe¢	ABS	Drain-Way	ASTM F628
1 1/2" - 4"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Pipe¢	ABS	Drain-Way	CSA B181.1
1 1/4" - 6" Sch 40
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

NOTE: Only products bearing the NSF Mark are NSF Certified.

Electrical Conduit and Accessories

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ ^ [G]	PE 4710	IPEX Inc	ASTM D2737
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ These products also meet the requirements for PE 3408 per ASTM D3350-02a. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing § +++ [G]*	MLTPL	IPEX	ASTM F1282
1"¢
1/2"¢
3/4"¢
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing ¢ § +++ [G]*	MLTPL	IPEX	CSA B137.9
1"
1/2"
3/4"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ [G]	PE 4710	IPEX Inc	AWWA C901
3/4" - 3" SDR 9 (PC250)
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ These products also meet the requirements for PE 3408 per ASTM D3350-02a. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ [G]	PE 4710	IPEX Inc	AWWA C906
4" - 12" DR 13.5 (PC160)
4" - 12" DR 21 (PC100)
4" - 12" DR 17 (PC125)
4" - 12" DR 11 (PC200)
4" - 12" DR 9 (PC250)
4" - 12" DR 7 (PC335)
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ These products also meet the requirements for PE 3408 per ASTM D3350-02a. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ [G]	PE 4710	IPEX Inc	ASTM F714
4" - 12" DR 21
4" - 12" DR 7
4" - 12" DR 11
4" - 12" DR 17
4" - 12" DR 13.5
4" - 12" DR 9
4" - 12" DR 7.3
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ These products also meet the requirements for PE 3408 per ASTM D3350-02a. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ ¢ [G]	PE 4710	IPEX Inc	CSA B137.1
1/2" - 6" Series 100
1/2" - 6" Series 125
1/2" - 6" Series 160
1/2" - 6" Series 200
1/2" - 6" Series 250
1/2" - 6" Series 60
1/2" - 6" Series 75
1/2" - 6" Series 80
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark are NSF Certified.

Geothermal Applications

Product Type	Material Type	Trade Name	Product Standard
Pipe# ^ ¢	PE 4710	IPEX Inc	CSA C448
3/4" - 2" Series 200
# Product meets the requirements of Section 5.2 Underground Piping Materials and Series Requirements of CSA C448. Installation in accordance with manufacturer's instructions and requirements of CSA C448. ^ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Pipe^ ¢	PE 4710	IPEX Inc	CSA B137.1
1/2" - 2" Series 250
3/4" - 2" SDR 11
3/4" - 2" Series 200
^ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

NOTE: Only products bearing the NSF Mark are NSF Certified.

Facility : L'Assomption, Québec, Canada

Corrosive Waste - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe¢ §	PP	Enfield	ASTM F1412
1 1/2" - 12" Sch 40
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Pipe¢ §	PP	Enfield	CSA B181.3
1 1/2" - 12" Sch 40
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Pipe~	PVDF	Plenumline™	CSA B181.3
1 1/2" - 6"
~ Product is authorized to bear the cNSF Mark.

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe¢	ABS	Drain-Way	ASTM F628
1 1/2" - 4"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Pipe	ABS	Drain-Way	ASTM D2661
1 1/4" - 6"

Gas Applications - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe § [1] [2] [3]*	PE 2708	HOME-FLEX UNDERGROUND	ASTM D2513
1/2" DR 9.33
3/4" DR 11
1" DR 11
1 1/4" DR 10
1 1/4" DR 11
1 1/2" DR 11
2" DR 11
* Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Product is Certified to the International Fuel Gas Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the International Fuel Gas Code™. [2] Product is Certified to NFPA 54: National Fuel Gas Code. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of NFPA 54: National Fuel Gas Code. [3] Product is Certified to NFPA 58: Liquified Petroleum Gas Code. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of NFPA 58: Liquified Petroleum Gas Code.
Tubing § [1] [2] [3]*	PE 2708	HOME-FLEX UNDERGROUND	ASTM D2513
1/4" - 1 3/4" CTS
* Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Product is Certified to the International Fuel Gas Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the International Fuel Gas Code™. [2] Product is Certified to NFPA 54: National Fuel Gas Code. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of NFPA 54: National Fuel Gas Code. [3] Product is Certified to NFPA 58: Liquified Petroleum Gas Code. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of NFPA 58: Liquified Petroleum Gas Code.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe^ ¢ § * +++ [G]*	PEX 5106/5306	Blue 904	ASTM F876/F877
3/4" - 2" SDR 9
^ Meets the Chlorine Resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ** Certified Blue 904 tubing is blue in color. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe^ ¢ § * +++ [G]*	PEX 5306	Blue 904	AWWA C904
3/4" - 2" SDR 9
^ Meets the Chlorine Resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ** Certified Blue 904 tubing is blue in color. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe^ ¢ * +++ [G]*	PEX	Blue 904	CSA B137.5
3/4" - 2" SDR 9
^ Meets the Chlorine Resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. ** Certified Blue 904 tubing is blue in color. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Sil-O-Flex	ASTM D2737
1/2" SDR 9[1]
3/4" - 2" SDR 9
1/2" - 2" SDR 11[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Ultra-Pure	ASTM D2737
1/2" SDR 9[1]
3/4" - 2" SDR 9
1/2" - 2" SDR 11[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Sil-O-Flex	ASTM D2239
1/2" SIDR 7[1]
3/4" - 2" SIDR 7
1/2" SIDR 9[1]
3/4" - 2" SIDR 9
1/2" - 2" SIDR 11.5[1]
1/2" - 2" SIDR 15[1]
1/2" - 2" SIDR 19[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Ultra-Pure	ASTM D2239
1/2" SIDR 7[1]
3/4" - 2" SIDR 7
1/2" SIDR 9[1]
3/4" - 2" SIDR 9
1/2" - 2" SIDR 11.5[1]
1/2" - 2" SIDR 15[1]
1/2" - 2" SIDR 19[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Sil-O-Flex	ASTM D3035
1/2" SDR 9[1]
3/4" - 2" SDR 9
1/2" - 3" SDR 11[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Ultra-Pure	ASTM D3035
1/2" DR 9[1]
3/4" - 2" DR 9
1/2" - 3" DR 11[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Sil-O-Flex	ASTM F714
4" DR 11
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Ultra-Pure	ASTM F714
4" DR 11
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Facility : Langley, British Columbia, Canada

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe	PVC	IPEX INC@	ASTM D2665
1 1/4" - 12" Sch 40
@ This pipe product is also represented by the trade name Blue Brute/Brute Bleue, Centurion, Cycle Tough, Fusible/Fusionnee, or Xirtec PVC.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [G]	PVC	IPEX INC@	ASTM D1785
1/2" - 12" Sch 40
1/2" - 12" Sch 80
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. @ This pipe product is also represented by the trade name Blue Brute/Brute Bleue, Centurion, Cycle Tough, Fusible/Fusionnee, or Xirtec PVC. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
PVC+ [G]	1	S907	ASTM D1784 12454
PVC+ [G]	1	S1007	ASTM D1784 12454
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : London, Ontario, Canada

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings! §	PVC	Multi*	ASTM D2665
22 1/2° Elbow (H x H)
8" Sch 40	026148/226029 6"
45° Elbow (H x H)
755162 3" x 3"	026101 6" x 6"	026102/626102/226032 8" x 8"	026170/626170 10" x 10"
026188/626188 12" x 12"	10" Sch 40	12" Sch 40
45° Long Wye (H x H x H)
755128 3" x 3" x 2"	755122 3" x 3" x 3"
45° Spigot Elbow (S x H)
755142 3" x 3"	026099 6" x 6"	026100/626100 8" x 8"
45° Wye (H x H x H)
026097/226044/755133 6" x 6" x 4"	026092/226053/755124 6" x 6" x 6"	026093/626093 8" x 8" x 4"	026095/626095/226045 8" x 8" x 6"
026094/626094/226054 8 "x 8" x 8"	026474 4"x4"x4"
90° Elbow (H x H)
026090/226031/755090 6" x 6"	026091/626091/226043 8" x 8"	026065/626065 10" x 10"	026134/626134/226309 12" x 12"
90° Spigot Elbow (S x H)
026424 6" x 6"	10" Sch 40	12" Sch 40
Bushing (Sp x H)
026149/755206 6" x 4"	026150/626150 8" x 4"	026151/626151/226034 8" x 6"
Cap (H)
026886/226036/755344 6"	026888/626888/226037 8"
Coupling (H x H)
026152/226038/755288 6" x 6"	026153/626153/226039 8" x 8"	026514/226370 8" x 4"	026517/226371 8" x 6"
10"	10" x 8"	12"
Double 45° Wye (H x H x H x H)
026098/626098 6" x 6" x 4 "x 4"
Female Adapter (H x FPT)
026452/755273 4"
Long Turn Tee (H x H x H)
026475 4" x 4" x 4"
Plug (Sp x Gskt)
8" PVC DWV C/O w/Plug
T-Y (H x H x H)
026079 6 "x 6" x 4"	026080/226052 6" x 6" x 6"
Tee (H x H x H)
026392/626392 10" x 10" x 10"	026668/626668 12" x 12" x 12"
Wyes (H x H x H)
10"	10" x 4"	10" x 6"	10" x 8"
12"	12" x 10"	12" x 4"	12" x 6"
12" x 8"
! Product may or may not bear the NSF U.P. Code marking. * This product may also use the Multi logo, IPEX or XIRTEC PVC as the trade name on the product. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.

NOTE: Only products bearing the NSF Mark are NSF Certified.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings+ ~ [1] [G]	PVC	CycleTough®	CSA B137.3
45° Elbow - G x G
055060/355060 2"	055061/355061 2 ½"	055062/355062 3’"	055063/355063 4"
055064/355064 6"	055065/355065 8"
90° Elbow - G x G
055070/355070 2"	055071/355071 2 ½"	055072/355072 3"	055073/355073 4"
055074/355074 6"	055075/355075 8"
Coupling - G x G
055036/355036 2"	055037/355037 2 ½"	055038/355038 3"	055039/355039 4"
055040/355040 6"	055041/355041 8"
Cross Tee - G x G x G x G
055048/355048 4"	055049/355049 6"
Male Adapter - MPTG
055099/355099 1 ½"	055100/355100 2"	055101/355101 2 ½"	055102/355102 3"
Reducer Bushing - S x G
055129/355117 2" x 1 1/2"	055130/355118 2" x 2 1/2"	055131/355119 3" x2"	055132/355320 3" x 2 1/2"
055133/355121 4" x 2"	055134/355122 4" x 2 1/2"	055135/355123 4" x 3"	055136/355124 6" x 2 1/2"
055137/355125 6" x 3"	055138/355126 6" x 4"	055139/355127 8" x 4"	055140/355128 8" x 6"
Repair Coupling - G x G
055217/355217 2"	055218/355218 2 ½"	055219/355219 3"	055220/355220 4"
055221/355221 6"	055222/355222 8"
Spigot Adapter - S x G
055028/355028 1 ½"	055029/355029 2"	055030/355030 2 ½"	055031/355031 3"
Tap Tee - G x G x FNPT
055191/355191 2" x 2" x 1 1/2"	055197/355197 2 1/2" x 1/2" x 2"	055200/355200 3" x 3" x 1"	055201/355201 3" x 3" x 1 1/4"
055202/355202 3" x 3" x 1 1/2"	055203/355203 3" x 3" x 2"	055206/355206 4" x 4" x 1"	055207/355207 4" x 4" x 1 1/4"
055208/355208 4" x 4" x 1 1/2"	055209/355209 4" x 4" x 2"	055212/355212 6" x 6" x 1"	055214/355214 6" x 6" x 1 1/2"
055215/355215 6" x 6" x 2"
Tee - G x G x DWV G
058881/355109 8" x 8" x 6"
Tee - G x G x G
055228/355228 2"	055229/355229 2 1/2"	055230/355230 3"	055231/355231 4"
055232/355232 6"	055233/355233 8"	055151/355151 2" x 2" x 1 1/2"	055153/355153 2 1/2" x 2 1/2" x 2"
055154/355154 3" x 3" x 1 1/2"	055155/355155 3" x 3" x 2"	055156/355156 3" x 3" x 2 1/2"	055157/355157 4" x 4" x 2"
055158/355158 4" x 4" x 2 1/2"	055159/355159 4" x 4" x 3"	055161/355161 6" x 6" x 2"	055162/355162 6" x 6" x 2 1/2"
055163/355163 6" x 6" x 3"	055164/355164 6" x 6" x 4"	055165/355165 8" x 8" x 2"	055166/355166 8" x 8" x 3"
055167/355167 8" x 8" x 4"	055168/355168 8" x 8" x 6"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ~ Product is authorized to bear the cNSF Mark. [1] Product may be marked with the "IPEX" trade name only. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings+ [G]	PVC	IPEX	ASTM D2466
45° Elbow Sch 40
10" (035926)	12" (035927)
45° Elbow (S x S)
3/4" (035482)
90° Elbow Sch 40
10" (035928)	12" (035929)
90° Elbow (S x S)
1/2" (035519)	3/4" (035520)	1" (035521)	1 1/2" (035523)
2" (035524)
90° Street Elbow (SP x S)
1/2" (035544)	3/4" (035545)	1" (035546)	1 1/2" (035548)
2" (035549)
Cap (S)
1/2" (035407)	3/4" (035408)	1" (035409)	1 1/2" (035411)
2" (035412)
Coupling (S x S)
1/2" (035448)	3/4" (035449)	1" (035450)	1 1/2" (035452)
2" (035453)
Coupling Sch 40 (S x S)
10" (235460)	12" (235461)
Female Adapter (S x FPT)
3/4" (035560)
Flush Reducer Bushing (Sp x S)
10"x 4" (235689)	10"x 6" (235690)	12"x 4" (235341)	12"x 6" (235692)
12"x 8" (235693)	12"x 10" (235694)
Male Adapter (S x MPT)
3/4" (035603)
Reducer Bushing Sch 40
10" x 8" (035691)
Reducer Coupling Sch 40 (S x S)
8"x 4" (235069)	8"x 6" (235070)	10"x 8" (235617)	12"x 10" (235618)
Tee (S x S x S)
1/2" (035775)	3/4" (035776)	1" (035777)	1 1/2" (035779)
2" (035780)
Tees Sch 40
10" (035930)	12" (035931)
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings+ [G]	PVC	IPEX	ASTM D2467
45º Elbow Sch 80
10" (036862)	12" (036863)
90º Elbow Sch 80
10" (036864)	12" (036865)
Cap Sch 80
8" (036068)
Reducer Bushing Sch 80
10" x 8" (036270)
Tees Sch 80
10" (036866)	12" (036876)
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings# + [G]	PVC	IPEX	ASTM F1970
45° Wye Sch 80
3" (036856)
45° Wye Sch 40
3" (035915)
45° Wye Sch 80
4" (036857)
45° Wye Sch 40
4" (035916)
45° Wye Sch 80
6" (036858)
45° Wye Sch 40
6" (035917)	6" x 6" x 4" (035922)
45° Wye Sch 80
6" x 6" x 4" (036861)
# Product tested for use in cold water (73°F) applications with a rated pressure of 150 psi. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings+++ [1] [G]	CPVC	Xirtec CPVC	ASTM F439
45° Elbow Sch 80
10" (059087)	12" (059088)
90° Elbow Sch 80
10" (059085)	12" (059086)
Cap Sch 80
8" (059029)
Reducer Sch 80
10" x 8" (059036)
Tees Sch 80
10" (059062)	12" (059084)
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Product may be marked with the "IPEX" trade name only. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Drain, Waste, and Vent, Continuous Waste, and Sewer Materials

Material Type	End Use	Trade Name	Product Standard
PVC	2	E09	ASTM D1784 12454
PVC	2	E07	ASTM D1784 12454

Facility : Mississauga, Ontario, Canada

Surface Burning Characteristics of Building Materials

Product Type	Material Type	Trade Name	Product Standard
Fittings~ [1] [2] [3]	PVC	System XFR	CAN/ULC S102.2
101002 ELBOW 180° FOR 526431	101004 ELBOW 180° FOR 526441	101009 ELBOW 180° FOR 526505	101011 ELBOW 180° FOR 526443
101012 ELBOW 180° FOR 526444	101013 ELBOW 180° FOR 526432	101014 ELBOW 180° FOR 526442	101015 ELBOW 180° FOR 526433
101016 ELBOW 180° FOR 526434	101018 ELBOW 90° FOR 526431	101019 ELBOW 90° FOR 526432	101020 ELBOW 90° FOR 526433
101021 ELBOW 90° FOR 526434	101023 ELBOW 90° FOR 526443	101024 ELBOW 90° FOR 526444	101031 PVC DWV MAIN PIECE FOR 526321
101032 PVC DWV MAIN PIECE FOR 526329	101034 PVC DWV MAIN PIECE FOR 526555	101035 PVC DWV MAIN PIECE FOR 526556	101037 PVC DWV MAIN PIECE FOR 526586
101039 PVC DWV RING FOR 526586 & 526588	101041 PVC DWV MAIN PIECE FOR 526330	101045 PVC DWV MAIN PIECE FOR 526485	101046 PVC DWV MAIN PIECE FOR 526486
101047 PVC DWV MAIN PIECE FOR 526487	101048 PVC DWV MAIN PIECE FOR 526494	101066 PVC DWV NUT 1½"	101068 PVC DWV NUT 2"
101104 PVC DWV MAIN PIECE FOR 526104	101105 PVC DWV MAIN PIECE FOR 526105	101134 PVC DWV MAIN PIECE FOR 526040	101135 PVC DWV MAIN PIECE FOR 526041
101136 PVC DWV MAIN PIECE FOR 526103	101161 PVC DWV MAIN PIECE FOR 526161	101401 PVC DWV 1 1/2" PLUG MPT	101402 PVC DWV 2" PLUG MPT
101403 PVC DWV 3" PLUG MPT	101404 PVC DWV 4" PLUG MPT	101405 PVC DWV 6" PLUG MPT	101588 PVC DWV MAIN PIECE FOR 526588
101601 PVC DWV 1 1/2" CLEANOUT SPXFPT	101602 PVC DWV 2" CLEANOUT SPXFPT	101603 PVC DWV 3" CLEANOUT SPXFPT	101604 PVC DWV 4" CLEANOUT SPXFPT
101606 PVC DWV 6" CLEANOUT SPXFPT	101630 NUT 1¼"	101631 NUT 1½"	101890 THREAD CAP FOR P-TRAP
526003 P-TRAP PRIMER TEE 3" X 3" X ½" HXHXFPT	526011 P-TRAP PRIMER TEE 4" X 4" X ½" HXHXFPT	526025 PVC DWV 3" 90° SHORT ELBOW HXH	526035 PVC DWV 2" 90° SHORT ELBOW HXH
526040 PVC DWV 1 1/2" CLEANOUT TEE W/P PVC	526041 PVC DWV 2" CLEANOUT TEE W/P PVC	526042 PVC DWV 1 1/2" CLEANOUT W/O PLUG	526046 PVC DWV 2" CLEANOUT W/O PLUG
526047 PVC DWV 3" CLEANOUT W/O PLUG	526056 PVC DWV 2" X 2" X 1 1/2" TY HXHXH	526058 PVC DWV 2" X 1 1/2" X 1 1/2" TY HXHXH	526060 PVC DWV 3" X 3" X 2" TY HXHXH
526061 PVC DWV 3" X 3" X 1 1/2" TY HXHXH	526064 PVC DWV 4" X 4" X 2" TY HXHXH	526066 PVC DWV 4" X 4" X 3" TY HXHXH	526071 PVC DWV 2" 45° ELBOW HXS
526072 PVC DWV 4" 45° HXS	526081 PVC DWV 1 1/2" TY HXHXH	526082 PVC DWV 2" TY HXHXH	526083 PVC DWV 3" TY HXHXH
526084 PVC DWV 4" TY HXHXH	526103 PVC DWV 3" CLEANOUT TEE W/P PVC	526104 PVC DWV 4" CLEANOUT TEE W/P PVC	526105 PVC DWV 4" X 3" X 4" CLEANOUT T W/P PVC
526121 PVC DWV 1 1/2" 90° DEG ELBOW HXH	526122 PVC DWV 2" 90°ELBOW HXH	526123 PVC DWV 3" 90° ELBOW HXH	526124 PVC DWV 4" 90°ELBOW HXH
526161 PVC DWV 6" CLEANOUT TEE W/P PVC	526171 PVC DWV 1 1/2" 45° Y HXHXH	526172 PVC DWV 2" 45° Y HXHXH	526173 PVC DWV 3" 45° Y HXHXH
526174 PVC DWV 4" 45° Y HXHXH	526175 PVC DWV 6" Y HXHXH	526194 PVC DWV 2" X 1 1/2" X 1 1/2" Y HXHXH	526195 PVC DWV 2" X 2" X 1 1/2" Y HXHXH
526196 PVC DWV 3" X 3" X 2" Y HXHXH	526197 PVC DWV 4" X 4" X 3" Y HXHXH	526198 PVC DWV 4" X 4" X 2" Y HXHXH	526199 PVC DWV 6" X 6" X 4" Y HXHXH
526201 PVC DWV 3" X 3" X 1 1/2" Y HXHXH	526221 PVC DWV 1 1/2" 45° ELBOW HXS	526223 PVC DWV 3" 45° ELBOW HXS	526231 PVC DWV 1 1/2" 90° ELBOW HXS
526232 PVC DWV 2" 90° ELBOW HXS	526233 PVC DWV 3" 90° ELBOW HXS	526234 PVC DWV 4" 90° ELBOW SPxH	526241 PVCDWV 1 1/2" 45° ELBOW HXH
526242 PVC DWV 2" 45° ELBOW HXH	526243 PVC DWV 3" 45° ELBOW HXH	526244 PVC DWV 4" 45° ELBOW HXH	526251 PVC DWV 1 1/2" 22.5° ELBOW HxH
526252 PVC DWV 2" 22.5° ELBOW HxH	526253 PVC DWV 3" 22.5° ELBOW HxH	526254 PVC DWV 4" 22.5° ELBOW HxH	526261 PVC DWV 1 1/2" 60° ELBOW HxH
526262 PVC DWV 2" 60° ELBOW HxH	526263 PVC DWV 3" 60° ELBOW HxH	526264 PVC DWV 4" 60° ELBOW HXH	526277 PVC DWV 1 1/2" X 1/2" DISH.ADAPT.
526282 PVC DWV 2" x 1/2" RED. BUSHING SXH	526284 PVC DWV 3" X 2" REDUC. BUSH. SPxH	526286 PVC DWV 4" X 3" REDUC. BUSH. SPxH	526288 PVC DWV 4" X 2" REDUC. BUSH. SPxH
526291 PVC/DWV 1 1/2" TUBE END C/O W/P PVC	526292 PVC DWV 3" x 1 1/2" REDUC. BUSH. SPxH	526294 PVC DWV 4" X 3" REDUC. BUSH. SPxH	526277 PVC DWV 1 1/2"x1/2" XFR Red. Bushing SpxFPT
526278 PVC DWV1 1/2"x 3/4" XFR Red. Bushing SpxFPT	526298 PVC/DWV 2" TUBE END C/O W/P PVC	526299 PVC/DWV 3" TUBE END C/O W/P PVC	526300 PVC/DWV 4" TUBE END C/O W/P PVC
526310 PVC DWV 2" AD.SEWER TO DWV SPXH	526311 PVC DWV 3"AD.SEWER to DWV SPXH	526312 PVC DWV 4" AD.SEWER to DWV SPXH	526313 PVC DWV 6" ADAPT SEWER TO DWV HXS
526321 PVC DWV 1 1/2" TRAP ADAP. H	526329 PVC DWV 1 1/2" X 1 1/4" TRAP ADAP. H	526330 1 1/2" 90° ELBOW W/SLIP JOINT NUT	526331 PVC DWV 1 1/2" ADAPTER HxMPT
526332 PVC DWV 2" ADAPTER HxMPT	526333 PVC DWV 3" ADAPTER HxMPT	526334 PVC DWV 4" ADAPTER HxMPT	526341 PVC DWV 1 1/2" ADAPTER HxFPT
526342 PVC DWV 2" ADAPTER HxFPT	526343 PVC DWV 3" ADAPTER HxFPT	526344 PVC DWV 4" ADAPTER HxFPT	526345 PVC DWV 1 1/2" CLEANOUT W/PLUG PVC
526346 PVC DWV 2" CLEANOUT W/PLUG PVC	526347 PVC DWV 3" CLEANOUT W/PLUG PVC	526348 PVC DWV 4" CLEANOUT W/PLUG PVC	526349 PVC DWV 6" CLEANOUT W/PLUG PVC
526351 PVC DWV 1 1/2" COUPLING HXH	526352 PVC DWV 2" COUPLING HXH	526353 PVC DWV 3" COUPLING HXH	526354 PVC DWV 4" COUPLING HXH
526362 PVC DWV 2" X 1 1/2" COUPLING HXH	526363 PVC DWV 3" X 1 1/2" COUPLING HXH	526364 PVC DWV 3" X 2" COUPLING HXH	526365 PVC DWV 4" X 2" COUPLING HXH
526366 PVC DWV 4" X 3" COUPLING HXH	526369 PVC DWV 4" X 1 1/2" COUPLING HXH	526376 PVC DWV 4" X 3" COUPLING HXH	526395 PVC DWV 3" X 1 1/2" INLET LEFT HAND
526396 PVC DWV 3" X 2" INLET LEFT HAND	526397 PVC DWV 3" X 1 1/2" INLET RIGHT HAND	526398 PVC DWV 3" X 2" INLET RIGHT HAND	526018 PVC DWV 3X1.5 DOUBLE INLET
526402 PVC DWV 2" GASKET PLUG	526404 PVC DWV 4" GASKET PLUG	526405 PVC DWV 6" GASKET PLUG	526411 PVC DWV 1 1/2" PERMANENT CAP
526412 PVC DWV 2" PERMANENT CAP	526413 PVC DWV 3" PERMANENT CAP	526414 PVC DWV 4" PERMANENT CAP	526431 PVC DWV 1 1/2" P-TRAP
526432 PVC DWV 2" P-TRAP	526433 PVC DWV 3" P-TRAP	526434 PVC DWV 4" P-TRAP	526441 PVC DWV 1 1/2" P-TRAP W/PLUG
526442 PVC DWV 2" P-TRAP W/PLUG	526443 PVC DWV 1 1/2" P-TRAP DOUBLE SEAL	526444 PVC DWV 2" P-TRAP DOUBLE SEAL	526485 PVC DWV 1½" EXPANSION JOINT HXH
526486 PVC DWV 2" EXPANSION JOINT HXH	526487 PVC DWV 3" EXPANSION JOINT HXH	526494 PVC DWV 3" EXPANSION JOINT HXS	526495 DISHWASHER Y 1½" HXHXBARBS
526499 PVC DWV ELBOW 4" 180° HXH	526505 PVC DWV 1 1/2" P-TRAP DOUBLE SEAL W/P	526522 PVC DWV 2" CAST IRON ADAPT MJ	526523 PVC DWV 3" CAST IRON ADAPT MJ
526524 PVC DWV 4" CAST IRON ADAPT MJ	526535 PVC DWV 4" X 3" CAST IRON ADAPT MJ	526538 PVC DWV 3" X 1 1/2" DOUBLE TY HXHXHXH	526542 PVC DWV 1 1/2" DOUBLE TY HXHXHXH
526543 PVC DWV 2" DOUBLE TY HXHXHXH	526547 PVC DWV 2" X 1 1/2" DOUBLE TY HXHXHXH	526550 PVC DWV 1 1/2" TY SXHXH	526552 PVC DWV 3" X 3" X 1 1/2" TY SXHXH
526555 PVC DWV 1 1/2" TRAP ADAPT. M	526556 PVC DWV 1 1/2" X 1 1/4" TRAP ADAPT. M	526573 PVC DWV 4" CLOSET FLANGE H	526584 PVC DWV 4" X 3" CLOSET FLANGE H
526586 PVC DWV 4" X 3" CLOSET FLANGE ADJUST.	526588 PVC DWV 4" X 3" CLO FLANGE ADJ W/C H	526591 PVC DWV 4" X 3" CLOSET FLANGE W/CAP	526592 PVC DWV 4" X 3" CLOSET FLANGE SP
526637 PVC DWV 1 1/2" DOUBLE Y HXHXHXH	526639 PVC DWV 3" DOUBLE Y HXHXHXH	526642 PVC DWV 2" X 1 1/2" DOUBLE Y HXHXHXH	526643 PVC DWV 3" X 1 1/2" DOUBLE Y HXHXHXH
526644 PVC DWV 3" X 2" DOUBLE Y HXHXHXH	526860 PVC DWV 6" X 4" RED. COUPLING HXH	526199 6" x 6" x 4" 45° WYE (HxHxH)	526175 6" x 6" x 6" 45° WYE (HxHxH)
526606 8" x 8" x 4" 45° WYE (HxHxH)	526607 8" x 8" x 6" 45° WYE (HxHxH)	526560 8" x 8" x 8" 45° WYE (HxHxH)	526054 6" x 4" Bushing SpxH
526073 6" x 6" 45° Elbow SpxH	526125 6" x 6" 90° Elbow HxH	526126 8" x 8" 90° Elbow HxH	526175 6" × 6" × 6" 45° Wye HxHxH
526199 6" × 6" × 4" 45° Wye HxHxH	526226 8" x 8" 45° Elbow SpxH	526242 2" x 2" 45° Elbow HxH	526235 6" x 6" 90° Elbow SpxH
526245 6" x 6" 45° Elbow HxH	526246 8" x 8" 45° Elbow HxH	526255 6" x 6" 22 1/2° Elbow HxH	526356 6" x 6" Coupling With Pipe Stop (HxH)
526358 8" x 8" Coupling With Pipe Stop (HxH)	526377 6" × 6" × 6" TY HxHxH	526385 6" × 6" × 4" TY HxHxH	526415 6” Cap H
526416 8” Cap H	526446 8" x 4" Bushing (SpxH)	526447 8" x 6" Bushing (SpxH)	526550 2” TY SpigotxHxH
526560 8" x 8" x 8" 45° Wye HxHxH	526606 8" x 8" x 4" 45° Wye HxHxH	526607 8" x 8" x 6" 45° Wye HxHxH	Coupling Socket x Socket 526183 10" PVC DWV COUPLING HxH
Coupling Socket x Socket 526184 12" PVC DWV COUPLING HxH SYSTEM	Elbow 22.5° 526156 8"x22 1/2D PVC DWV ELBOW HxH	Elbow 45° Socket x Socket 526421 10"x45D PVC DWV ELBOW HxH	Elbow 45° Socket x Socket 526422 12"x45D PVC DWV SHORT TURN ELBOW HxH
Elbow 45° Spigot x Socket 526531 10"x45D PVC DWV SHORT TURN ELBOW SPxH	Elbow 45° Spigot x Socket 526532 12"x45D PVC DWV SHORT TURN ELBOW SPxH	Elbow 90° Socket X socket 526132 10"x90D PVC DWV ELBOW HxH	Elbow 90° Socket X socket 526133 12"x90D PVC DWV ELBOW HxH
Elbow 90°Spigot X Socket 526114 10"x90D PVC DWV ELBOW SPxH	Elbow 90° Spigot X Socket 526115 12"x90D PVC DWV ELBOW SPxH	Plug 526350 8" PVC DWV C/O W/ PLUG SPxGSKT PLUG	Plug 526357 8" PVC DWV PLUG C/O MPT
Plug 526355 8" PVC DWV FTG C/O SPxFPT	Reducer Bushing Spigot x Socket 526851 10"x4" PVC DWV FLUSH RED. BUSHING SPxH	Reducer Bushing Spigot x Socket 526852 10"x6" PVC DWV FLUSH RED. BUSHING SPxH	Reducer Bushing Spigot x Socket 526853 10"x8" PVC DWV FLUSH RED. BUSHING SPxH
Reducer Bushing Spigot x Socket 526854 12"x4" PVC DWV FLUSH RED. BUSHING SPxH	Reducer Bushing Spigot x Socket 526855 12"x6" PVC DWV FLUSH RED. BUSHING SPxH	Reducer Bushing Spigot x Socket 526856 12"x8" PVC DWV FLUSH RED. BUSHING SPxH	Reducer Bushing Spigot x Socket 526857 12"x10" PVC DWV FLUSH RED. BUSHING SPxH
Reducer Bushing Spigot x Socket 526843 10"x8"x45D PVC DWV WYE HxHxH	Reducer Coupling Socket x Socket 526208 8"x4" PVC DWV REDUCER COUPLING HxH	Reducer Coupling Socket x Socket 526209 8"x6" PVC DWV REDUCER COUPLING HxH	Reducer Coupling Socket x Socket 526212 10"x8" PVC DWV REDUCER COUPLING HxH
Reducer Coupling Socket x Socket 526215 12"x10" PVC DWV REDUCER COUPLING HxH	Wye 45° Socket x Socket x Socket 526840 10"x45D PVC DWV WYE HxHxH	Wye 45° Socket x Socket x Socket 526841 10"x4"x45D PVC DWV WYE HxHxH	Wye 45° Socket x Socket x Socket 526842 10"x6"x45D PVC DWV WYE HxHxH
Wye 45° Socket x Socket x Socket 526844 12"x45D PVC DWV WYE HxHxH	Wye 45° Socket x Socket x Socket 526845 12"x4"x45D PVC DWV WYE HxHxH	Wye 45° Socket x Socket x Socket 526846 12"x6"x45D PVC DWV WYE HxHxH	Wye 45° Socket x Socket x Socket 526847 12"x8"x45D PVC DWV WYE HxHxH
Wye 45° Socket x Socket x Socket 526848 12"x10"x45D PVC DWV WYE HxHxH	XFR PVC Fabricated Fittings – 45° Wye 8” x 4”	XFR PVC Fabricated Fittings – 45° Wye 8” x 6”	XFR PVC Fabricated Fittings – 45° Wye 8” x 8”
XFR PVC Fabricated Fittings – 45° Wye 10” x 4”	XFR PVC Fabricated Fittings – 45° Wye 10” x 6”	XFR PVC Fabricated Fittings – 45° Wye 10” x 8”	XFR PVC Fabricated Fittings – 45° Wye 10” x 10”
XFR PVC Fabricated Fittings – 45° Wye 12” x 4”	XFR PVC Fabricated Fittings – 45° Wye 12” x 6”	XFR PVC Fabricated Fittings – 45° Wye 12” x 8”	XFR PVC Fabricated Fittings – 45° Wye 12” x 10”
XFR PVC Fabricated Fittings – 45° Wye 12” x 12”	XFR PVC Fabricated Fittings – 45° Wye 14” x 4”	XFR PVC Fabricated Fittings – 45° Wye 14” x 6”	XFR PVC Fabricated Fittings – 45° Wye 14” x 8”
XFR PVC Fabricated Fittings – 45° Wye 14” x 10”	XFR PVC Fabricated Fittings – 45° Wye 14” x 12”	XFR PVC Fabricated Fittings – 45° Wye 14” x 14”	XFR PVC Fabricated Fittings – 45° Wye 16” x 4”
XFR PVC Fabricated Fittings – 45° Wye 16” x 6”	XFR PVC Fabricated Fittings – 45° Wye 16” x 8”	XFR PVC Fabricated Fittings – 45° Wye 16” x 10”	XFR PVC Fabricated Fittings – 45° Wye 16” x 12”
XFR PVC Fabricated Fittings – 45° Wye 16” x 14”	XFR PVC Fabricated Fittings – 45° Wye 16” x 16”	XFR PVC Fabricated Fittings – 45° Wye 18” x 4”	XFR PVC Fabricated Fittings – 45° Wye 18” x 6”
XFR PVC Fabricated Fittings – 45° Wye 18” x 8”	XFR PVC Fabricated Fittings – 45° Wye 18” x 10”	XFR PVC Fabricated Fittings – 45° Wye 18” x 12”	XFR PVC Fabricated Fittings – 45° Wye 18” x 14”
XFR PVC Fabricated Fittings – 45° Wye 18” x 16”	XFR PVC Fabricated Fittings – 45° Wye 18” x 18”	XFR PVC Fabricated Fittings – Apartment Fitting 3”x3”x3”x1½”x1½” - 526007	XFR PVC Fabricated Fittings – Cap 8”
XFR PVC Fabricated Fittings – Cap 10”	XFR PVC Fabricated Fittings – Cap 12”	XFR PVC Fabricated Fittings – Cap 14”	XFR PVC Fabricated Fittings – Coupling 8”
XFR PVC Fabricated Fittings – Coupling 10”	XFR PVC Fabricated Fittings – Coupling 12”	XFR PVC Fabricated Fittings – Coupling 14”	XFR PVC Fabricated Fittings – Coupling 16”
XFR PVC Fabricated Fittings – Coupling 18”	XFR PVC Fabricated Fittings – Coupling ¼” Bend / 90° Elbow 8”	XFR PVC Fabricated Fittings – Coupling ¼” Bend / 90° Elbow 10”	XFR PVC Fabricated Fittings – Coupling ¼” Bend / 90° Elbow 12”
XFR PVC Fabricated Fittings – Coupling ¼” Bend / 90° Elbow 14”	XFR PVC Fabricated Fittings – Coupling ¼” Bend / 90° Elbow 16”	XFR PVC Fabricated Fittings – Coupling ¼” Bend / 90° Elbow 18”	XFR PVC Fabricated Fittings – Coupling 1/8” Bend / 45° Elbow 8”
XFR PVC Fabricated Fittings – Coupling 1/8” Bend / 45° Elbow 10”	XFR PVC Fabricated Fittings – Coupling 1/8” Bend / 45° Elbow 12”	XFR PVC Fabricated Fittings – Coupling 1/8” Bend / 45° Elbow 14”	XFR PVC Fabricated Fittings – Coupling 1/8” Bend / 45° Elbow 16”
XFR PVC Fabricated Fittings – Coupling 1/8” Bend / 45° Elbow 18”	XFR PVC Fabricated Fittings – Coupling 1/16” Bend / 22 ½° Elbow 8”	XFR PVC Fabricated Fittings – Coupling 1/16” Bend / 22 ½° Elbow 10”	XFR PVC Fabricated Fittings – Coupling 1/16” Bend / 22 ½° Elbow 12”
XFR PVC Fabricated Fittings – Coupling 1/16” Bend / 22 ½° Elbow 14”	XFR PVC Fabricated Fittings – Coupling 1/16” Bend / 22 ½° Elbow 18”	XFR PVC Fabricated Fittings – Coupling 1/16” Bend / 22 ½° Elbow 18”	XFR PVC Fabricated Fittings–Double Apartment Fitting 3x3x3x3x1½x1½x1½x1½-526008
XFR PVC Fabricated Fittings – Double Wye 8” x 4”	XFR PVC Fabricated Fittings – Double Wye 8” x 6”	XFR PVC Fabricated Fittings – Double Wye 8” x 8”	XFR PVC Fabricated Fittings – Double Wye 10” x 4”
XFR PVC Fabricated Fittings – Double Wye 10” x 6”	XFR PVC Fabricated Fittings – Double Wye 10” x 8”	XFR PVC Fabricated Fittings – Double Wye 10” x 10”	XFR PVC Fabricated Fittings – Double Wye 12” x 4”
XFR PVC Fabricated Fittings – Double Wye 12” x 6”	XFR PVC Fabricated Fittings – Double Wye 12” x 8”	XFR PVC Fabricated Fittings – Double Wye 12” x 10”	XFR PVC Fabricated Fittings – Double Wye 12” x 12”
XFR PVC Fabricated Fittings – Double Wye 14” x 4”	XFR PVC Fabricated Fittings – Double Wye 14” x 6”	XFR PVC Fabricated Fittings – Double Wye 14” x 8”	XFR PVC Fabricated Fittings – Double Wye 14” x 10”
XFR PVC Fabricated Fittings – Double Wye 14” x 12”	XFR PVC Fabricated Fittings – Double Wye 14” x 14”	XFR PVC Fabricated Fittings – Double Wye 16” x 4”	XFR PVC Fabricated Fittings – Double Wye 16” x 6”
XFR PVC Fabricated Fittings – Double Wye 16” x 8”	XFR PVC Fabricated Fittings – Double Wye 16” x 10”	XFR PVC Fabricated Fittings – Double Wye 16” x 12”	XFR PVC Fabricated Fittings – Double Wye 16” x 14”
XFR PVC Fabricated Fittings – Double Wye 16” x 16”	XFR PVC Fabricated Fittings – Double Wye 18” x 4”	XFR PVC Fabricated Fittings – Double Wye 18” x 6”	XFR PVC Fabricated Fittings - Double ° Wye 18” x 8”
XFR PVC Fabricated Fittings – Double Wye 18” x 10”	XFR PVC Fabricated Fittings – Double Wye 18” x 12”	XFR PVC Fabricated Fittings – Double Wye 18” x 14”	XFR PVC Fabricated Fittings – Double Wye 18” x 16”
XFR PVC Fabricated Fittings – Double Wye 18” x 18”	XFR PVC Fabricated Fittings – Reducing Bushing 8” x 4”	XFR PVC Fabricated Fittings – Reducing Bushing 8” x 6”	XFR PVC Fabricated Fittings – Reducing Bushing 10” x 4”
XFR PVC Fabricated Fittings – Reducing Bushing 10” x 6”	XFR PVC Fabricated Fittings – Reducing Bushing 10” x 8”	XFR PVC Fabricated Fittings – Reducing Bushing 12” x 4”	XFR PVC Fabricated Fittings – Reducing Bushing 12” x 6”
XFR PVC Fabricated Fittings – Reducing Bushing 12” x 8”	XFR PVC Fabricated Fittings – Reducing Bushing 12” x 10”	XFR PVC Fabricated Fittings – Reducing Bushing 14” x 4”	XFR PVC Fabricated Fittings – Reducing Bushing 14” x 6”
XFR PVC Fabricated Fittings – Reducing Bushing 14” x 8”	XFR PVC Fabricated Fittings – Reducing Bushing 14” x 10”	XFR PVC Fabricated Fittings – Reducing Bushing 14” x 12”	XFR PVC Fabricated Fittings – Reducing Bushing 16” x 4”
XFR PVC Fabricated Fittings – Reducing Bushing 16” x 6”	XFR PVC Fabricated Fittings – Reducing Bushing 16” x 8”	XFR PVC Fabricated Fittings – Reducing Bushing 16” x 10”	XFR PVC Fabricated Fittings – Reducing Bushing 16” x 12”
XFR PVC Fabricated Fittings – Reducing Bushing 16” x 14”	XFR PVC Fabricated Fittings – Reducing Bushing 18” x 4”	XFR PVC Fabricated Fittings – Reducing Bushing 18” x 6”	XFR PVC Fabricated Fittings – Reducing Bushing 18” x 8”
XFR PVC Fabricated Fittings – Reducing Bushing 18” x 10”	XFR PVC Fabricated Fittings – Reducing Bushing 18” x 12”	XFR PVC Fabricated Fittings – Reducing Bushing 18” x 14”	XFR PVC Fabricated Fittings – Reducing Bushing 18” x 16”
XFR PVC Fabricated Fittings – Tee 8” x 4”	XFR PVC Fabricated Fittings – Tee 8” x 6”	XFR PVC Fabricated Fittings – Tee 8” x 8”	XFR PVC Fabricated Fittings – Tee 10” x 4”
XFR PVC Fabricated Fittings – Tee 10” x 6”	XFR PVC Fabricated Fittings – Tee 10” x 8”	XFR PVC Fabricated Fittings – Tee 10” x 10”	XFR PVC Fabricated Fittings – Tee 12” x 4”
XFR PVC Fabricated Fittings – Tee 12” x 6”	XFR PVC Fabricated Fittings – Tee 12” x 8”	XFR PVC Fabricated Fittings – Tee 12” x 10”	XFR PVC Fabricated Fittings – Tee 12” x 12”
XFR PVC Fabricated Fittings – Tee 14” x 4”	XFR PVC Fabricated Fittings – Tee 14” x 6”	XFR PVC Fabricated Fittings – Tee 14” x 8”	XFR PVC Fabricated Fittings – Tee 14” x 10”
XFR PVC Fabricated Fittings – Tee 14” x 12”	XFR PVC Fabricated Fittings – Tee 14” x 14”	XFR PVC Fabricated Fittings – Tee 16” x 4”	XFR PVC Fabricated Fittings – Tee 16” x 6”
XFR PVC Fabricated Fittings – Tee 16” x 8”	XFR PVC Fabricated Fittings – Tee 16” x 10”	XFR PVC Fabricated Fittings – Tee 16” x 12”	XFR PVC Fabricated Fittings – Tee 16” x 14”
XFR PVC Fabricated Fittings – Tee 16” x 16”	XFR PVC Fabricated Fittings – Tee 18” x 4”	XFR PVC Fabricated Fittings – Tee 18” x 6”	XFR PVC Fabricated Fittings – Tee 18” x 8”
XFR PVC Fabricated Fittings – Tee 18” x 10”	XFR PVC Fabricated Fittings – Tee 18” x 12”	XFR PVC Fabricated Fittings – Tee 18” x 14”	XFR PVC Fabricated Fittings – Tee 18” x 16”
XFR PVC Fabricated Fittings – Tee 18” x 18”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 8” x 4”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 8” x 6”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 8” x 8”
XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 10” x 4”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 10” x 6”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 10” x 8”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 10” x 10”
XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 12” x 4”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 12” x 6”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 12” x 8”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 12” x 10”
XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 12” x 12”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 14” x 4”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 14” x 6”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 14” x 8”
XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 14” x 10”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 14” x 12”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 14” x 14”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 16” x 4”
XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 16” x 6”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 16” x 8”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 16” x 10”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 16” x 12”
XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 16” x 14”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 16” x 16”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 18” x 4”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 18” x 6”
XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 18” x 8”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 18” x 10”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 18” x 12”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 18” x 14”
XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 18” x 16”	XFR PVC Fabricated Fittings – Tee Wye (Sanitary Tees) 18” x 18”
~ Product is authorized to bear the cNSF Mark. [1] System XFR® PVC fittings have been tested in conjunction with System XFR® pipe only, for use in drain, waste and ventilation applications. [2] FSR and SDC listed values obtained with 10 mm and 0 mm exposed pipe lengths between fittings. [3] Flame Spread Value (FSV) <=25 Smoke Developed Value (SDV) <=50
Pipe~ [1] [2] [3]	PVC	System XFR	CAN/ULC S102.2
1 1/2" Sch 40
2" Sch 40
3" Sch 40
4" Sch 40
6" Sch 40
8" Sch 40
10" Sch 40
12" Sch 40
14" Sch 40
16" Sch 40
18" Sch 40
~ Product is authorized to bear the cNSF Mark. [1] System XFR® PVC fittings have been tested in conjunction with System XFR® pipe only, for use in drain, waste and ventilation applications. [2] FSR and SDC listed values obtained with 10 mm and 0 mm exposed pipe lengths between fittings. [3] Flame Spread Value (FSV) <=25 Smoke Developed Value (SDV) <=50

NOTE: Only products bearing the NSF Mark are NSF Certified.

Facility : Saint-Jacques-De-Montcalm, Québec, Canada

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings! §*	PVC	Multi*	ASTM D2665
22 1/2° Elbow (H x H)
755177 3" x 3"	026473 or 755178 4" x 4"
22 1/2° Spigot Elbow (H x S)
755187 3" x 3"	026068 or 755188 4" x 4"
45° Elbow (H x H)
755160 1 1/2" x 1 1/2"	755161 2" x 2"	755162 3" x 3"	026472 4" x 4"
755164, 026101, 226030 6" x 6"
45° Spigot Elbow (H x S)
755140 1 1/2" x 1 1/2"	755141 2" x 2"	755142 3" x 3"	026120 4" x 4"
755144, 026099 6" x 6"
45° Wye (H x H x H)
026474 4" x 4" x 4"
60° Elbow (H x H)
755195 1 1/2"
90° Elbow (H x H)
755086 1 1/2" x 1 1/2"	026680 or 755087 2" x 2"	755088 3" x 3"	026471 4" x 4"
026090, 226031 6"x 6"
90° Elbow Short (H x H)
755090 6" x 6"
90° Long Sweep Elbow (H x H)
755101 2" x 2"	755102 3" x 3"	026424 6" x 6"
90° Street Elbow (H x S)
755151 1 1/2" x 1 1/2"	755153 2" x 2"	755154 3" x 3"
Coupling (H x H)
026476 4" x 4"
DBL Sanitary Tee (HXHXHXH)
755059 1 1/2"	755058 2"	755060 2"x2"x1" 1/2"x1 1/2"
Male Adapter (MPT x H)
755261 2"
Reducing Coupling (H x H)
026513 6" x 4"
Sanitary Tee (H x S)
755034 1 1/2" x 1 1/2"
T-Y (H x H x H)
026470 4" x 4" x 4"
TRAP ADPT (HXMPT)
755465 1 1/2"
! Product may or may not bear the NSF U.P. Code marking. * This product may also use the Multi logo as the trade name on the product. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.

Drain, Waste, and Vent, Continuous Waste, and Sewer Materials

Material Type	End Use	Trade Name	Product Standard
PVC	2	E09	ASTM D1784 12454
PVC	2	JAC650N	ASTM D1784 12454

Facility : Saint-Joseph-De-Beauce, Québec, Canada

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe[1]	PVC	IPEX INC*	ASTM D2665
1 1/4" – 4" Sch 40
* This pipe product is also represented by the trade name Blue Brute/Brute Bleue, Centurion, Cycle Tough, Fusible/Fusionnee, or Xirtec PVC. [1] Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [1] [G]	PVC	IPEX INC*	ASTM D1785
1 1/4" – 4" Sch 40
* This pipe product is also represented by the trade name Blue Brute/Brute Bleue, Centurion, Cycle Tough, Fusible/Fusionnee, or Xirtec PVC. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
PVC+ [G]	1	S907	ASTM D1784 12454
PVC+ [G]	1	S1007	ASTM D1784 12454
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Facility : Scarborough, Ontario, Canada

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe	PVC	IPEX INC@	ASTM D2665
1 1/4" - 24" Sch 40
@ This pipe product is also represented by the trade name Blue Brute/Brute Bleue, Centurion, Cycle Tough, Fusible Brute/Brute Fusionnée, or Xirtec PVC.

NOTE: Only products bearing the NSF Mark are NSF Certified.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [G]	PVC	IPEX INC@	ASTM D1785
1/2" - 24" Sch 80
1/2" - 24" Sch 40
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. @ This pipe product is also represented by the trade name Blue Brute/Brute Bleue, Centurion, Cycle Tough, Fusible Brute/Brute Fusionnée, or Xirtec PVC. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Drain, Waste, and Vent, Continuous Waste, and Sewer Materials

Material Type	End Use	Trade Name	Product Standard
PVC	2	E09	ASTM D1784 12454
PVC	2	E07	ASTM D1784 12454

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
PVC+ [G]	2	PVC E05 WHITE	ASTM D1784 12454
PVC+ [G]	2	PVC E05 GREY	ASTM D1784 12454
PVC+ [G]	2	E08	ASTM D1784 12454
PVC+ [G]	1	S907	ASTM D1784 12454
PVC+ [G]	1	S1007	ASTM D1784 12454
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Facility : St. Laurent, Québec, Canada

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe	PVC	IPEX INC@	ASTM D2665
1 1/4" - 24" Sch 40
@ This pipe product is also represented by the trade name Blue Brute/Brute Bleue, Centurion, Cycle Tough, Fusible Brute/Brute Fusionée, or Xirtec PVC.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [G]	PVCO	BIONAX	ASTM F1483
4" - 12" CIOD
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PVCO	BIONAX	AWWA C909
4" - 12" CIOD
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PVCO	Bionax SR	ASTM F1483
4" - 12" CIOD
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PVCO	Bionax SR	AWWA C909
4" - 12" CIOD
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PVC	IPEX INC@	ASTM D1785
1/2" - 24" Sch 80
1/2" - 24" Sch 40
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. @ This pipe product is also represented by the trade name Blue Brute/Brute Bleue, Centurion, Cycle Tough, Fusible Brute/Brute Fusionée, or Xirtec PVC. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [1] [G]	PVC	TerraBrute	AWWA C900
8" - 12" DR 18
4" - 6" DR 14
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] The TerraBrute potable water pipe is blue. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Sewer Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe	PVCO	BIONAX	AWWA C909
4" - 12" CIOD
Pipe	PVCO	BIONAX	ASTM F1483
4" - 12" CIOD
Pipe	PVCO	BIONAX SR	AWWA C909
4" - 12" CIOD
Pipe	PVCO	BIONAX SR	ASTM F1483
4" - 12" CIOD
Pipe[1]	PVC	TerraBrute	AWWA C900
4" - 6" DR 14
8" - 12" DR 18
[1] The TerraBrute sewer pipe may be green or white.

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
PVC+ [G]	1	S907	ASTM D1784 12454
PVC+ [G]	1	S1007	ASTM D1784 12454
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Facility : Toronto, Ontario, Canada

Surface Burning Characteristics of Building Materials

Product Type	Material Type	Trade Name	Product Standard
Fittings~ [1] [2] [3]	CPVC	IPEX (Aquarise)	CAN/ULC S102.2
Adapter (IPS S x CTS S)
359100 1/2"	359101 3/4"
Adapter (IPS SOC x CTS S)
359098 3/4"	359097 1/2"
45° Elbow (Soc x Soc)
359164 1/2"	359165 3/4"	359166 1"	359167 1 1/4"
359168 1 1/2"	359169 2"	359170 2 1/2"	359171 3"
359172 4"	359173 6"
90° Elbow (Soc x Soc)
359194 1/2"	359195 3/4"	359196 1"	359197 1 1/4
359198 1 1/2"	359199 2"	359200 2 1/2"	359201 3"
359202 4"	359203 6"
90° Street Elbow (S x S)
359175 1/2"	359176 3/4"	359177 1"
Cap (Soc)
359109 1/2"	359110 3/4"	359111 1"	359112 1 1/4"
359113 1 1/2"	359114 2"	359115 2 1/2"	359116 3"
359107 4"	359108 6"
Female Adapter, SOC x FPT
359800 1/2"	359801 3/4"	359803 1 1/4"	359804 1 1/2"
359805 2"
Female Adapter, SP x FPT
359820 1/2"	359821 3/4"	359822 1"
Flange x Socket
359228 1/2"	359229 3/4"	359230 1"	359231 1 1/4"
359232 1 1/2"	359233 2"	359040 2 1/2"	359234 2 1/2"
359041 3"	359235 3"	359043 4"	359236 4"
359042 6"	359238 6"
Coupling (Soc x Soc)
359132 1/2"	359133 3/4"	359134 1"	359135 1 1/4"
359136 1 1/2"	359137 2"	359138 2 1/2"	359139 3"
359140 4"	359141 6"
Male Adapter, SOC x MPT
359811 1/2"	359812 3/4"	359813 1"	359814 1 1/4"
359815 1 1/2"	359816 2"
Male Adapter, SP x MPT
359823 1/2"	359824 3/4"	359825 1"
Manifold Tee (¾" SPGx¾" SOC w/One ½" SOC Branches)
359061 3/4" x 1/2"
Manifold Tee (¾" SPGx¾" SOC w/Two ½" SOC Branches)
359060 3/4" x 1/2"
Reducer Bushing (Sp x Soc)
359375 3/4" x 1/2"	359376 1" x 1/2"	359377 1" x 3/4"	359378 1 1/4" x 1/2"
359379 1 1/4" x 3/4"	359380 1 1/4" x 1"	359381 1 1/2" x 1/2"	359382 1 1/2" x 3/4"
359383 1 1/2" x 1"	359384 1 1/2" x 1 1/4"	359385 2" x 1/2"	359386 2" x 3/4"
359387 2" x 1"	359388 2" x 1 1/4"	359389 2" x 1 1/2"	359390 2 1/2" x 3/4"
359391 2 1/2" x 1"	359392 2 1/2" x 2"	359393 3" x 1 1/2"	359394 3" x 2"
359395 3" x 2 1/2"	359428 4" x 1 1 /4"	359429 4" x 1 1/2"	359396 4" x 2"
359430 4" x 2 1/2"	359398 6" x 2"	359397 4" x 3"	359399 6" x 3"
359400 6" x 4"
Reducer Coupling (Soc x Soc)
359460 3/4" x 1/2"	359461 1" x 1/2"	359462 1" x 3/4"	359463 1 1/4" x 1"
359465 1 1/2" x 1"	359466 1 1/2" x 1 1/4"	359467 2" x 1"	359458 2" x 1 1/2"
359470 3" x 2"	359459 4" x 2"	359472 4" x 3"	359510 6" x 6" x 2"
359511 6" x 6" x 3"	359512 6" x 6" x 4"
Reducing Tee (S x S x S)
359513 3/4" x 1/2" x 3/4"	359514 3/4" x 1/2" x 1/2"	359492 3/4" x 3/4" x 1/2"	359493 1" x 1" x 1/2"
359494 1" x 1" x 3/4"	359495 1 1/4" x 1 1/4" x 1"	359515 1 1/2" x 1 1/2" x 1/2"	359496 1 1/2" x 1 1/2" x 3/4"
359497 1 1/2" x 1 1/2" x 1"	359498 2" x 2" x 1/2"	359499 2" x 2" x 3/4"	359500 2" x 2" x 1"
359501 2" x 2" x 1 1/2"	359503 2 1/2" x 2 1/2" x 1/2"	359504 2 1/2" x 2 1/2" x 3/4"	359505 2 1/2" x 2 1/2" x 1"
359506 2 1/2" x 2 1/2" x 1 1/4"	359507 2 1/2" x 2 1/2" x 2"	359502 3" x 3" x 2"	359508 4" x 4" x 2"
359509 4" x 4" x 3"
Tee (Soc x Soc x Soc)
359481 1/2"	359482 3/4"	359483 1"	359484 1 1/4"
359485 1 1/2"	359486 2"	359487 2 1/2"	359488 3"
359489 4"	359490 6"
Union (S x S)
359520 1/2"	359521 3/4"	359522 1"	359523 1 1/4"
359524 1 1/2"	359525 2"	359051 3"	359550 4"
Van Stone Style Flange 150 lbs.
359268 3"	359266 1 1/2"	359267 2"	359270 4"
~ Product is authorized to bear the cNSF Mark. [1] AquaRise pipe and fittings are certified as a system to CAN/ULC S102.2. [2] Flame Spread Value (FSV) <=25 Smoke Developed Value (SDV) <=50 [3] Product may be marked with the "IPEX" trade name only.
Pipe~ [1] [2] [3]	CPVC 4120	IPEX (Aquarise)	CAN/ULC S102.2
1/2" - 6" SDR 11
1 1/2" - 6" SDR 21
~ Product is authorized to bear the cNSF Mark. [1] AquaRise pipe and fittings are certified as a system to CAN/ULC S102.2. [2] Flame Spread Value (FSV) <=25 Smoke Developed Value (SDV) <=50 [3] Product may be marked with the "IPEX" trade name only.
Fitting Compounds[2]	CPVC 4120	AquaRise	CAN/ULC S102.2
Nominal 2.7 to 20 mm thick
[2] Flame Spread Value (FSV) <=25 Smoke Developed Value (SDV) <=50
Pipe Compound[2]	CPVC 4120	AquaRise	CAN/ULC S102.2
Nominal 1.9 to 17 mm thick
[2] Flame Spread Value (FSV) <=25 Smoke Developed Value (SDV) <=50

NOTE: Only products bearing the NSF Mark are NSF Certified.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings+++ [2] [G] #####	MLTPL	IPEX (Aquarise)	ASTM F1970
Female Adapter, SOC x FPT
359800 1/2"	359801 3/4"	359805 2"	359803 1 1/4"
359804 1 1/2"	359802 1"
Female Adapter, SP x FPT
359820 1/2"	359821 3/4"	359822 1"
Male Adapter, SOC x MPT
359811 1/2"	359812 3/4"	359813 1"	359814 1 1/4"
359815 1 1/2"	359816 2"
Male Adapter, SP x MPT
359823 1/2"	359824 3/4"	359825 1"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Product may be marked with the "IPEX" trade name only. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. ##### Product tested for uses in 73°F with a rated pressure of 400 psi per ASTM F1970, and 180°F with a rated pressure of 100 psi per CSA B137.6.
Fittings¢ +++ [2] [G] #####	MLTPL	IPEX (Aquarise)	CSA B137.6
Female Adapter, SOC x FPT
359800 1/2"	359801 3/4"	359802 1"	359803 1 1/4"
359804 1 1/2"	359805 2"
Female Adapter, SP x FPT
359820 1/2"	359821 3/4"	359822 1"
Male Adapter, SOC x MPT
359811 1/2"	359812 3/4"	359813 1"	359814 1 1/4"
359815 1 1/2"	359816 2"
Male Adapter, SP x MPT
359823 1/2"	359824 3/4"	359825 1"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Product may be marked with the "IPEX" trade name only. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. ##### Product tested for uses in 73°F with a rated pressure of 400 psi per ASTM F1970, and 180°F with a rated pressure of 100 psi per CSA B137.6.
Fittings+++ [2] [G]	CPVC	IPEX (AquaRise)	ASTM F438
45° Elbow (Soc x Soc)
359164 1/2"	359165 3/4"	359166 1"
90° Elbow (Soc x Soc)
359194 1/2"	359195 3/4"	359196 1"
90° Street Elbow (S x S)
359175 1/2"	359176 3/4"	359177 1"
Adapter (IPS S x CTS S)
359100 1/2"	359101 3/4"
Adapter (IPS SOC x CTS S)
359097 1/2"	359098 3/4"
Cap (Soc)
359109 1/2"	359110 3/4"	359111 1"
Coupling (Soc x Soc)
359132 1/2"	359133 3/4"	359134 1"
Manifold Tee (¾" SPGx¾" SOC w/One ½" SOC Branches)
359061 3/4" x 1/2"
Manifold Tee (¾" SPGx¾" SOC w/Two ½" SOC Branches)
359060 3/4" x 1/2"
Reducer Bushing (Sp x Soc)
359375 3/4" x 1/2"	359376 1" x 1/2"	359377 1" x 3/4"
Reducer Coupling (Soc x Soc)
359460 3/4" x 1/2"	359461 1" x 1/2"	359462 1" x 3/4"
Reducing Tee (S x S x S)
359514 3/4" x 1/2" x 1/2"	359513 3/4" x 1/2" x 3/4"	359492 3/4" x 3/4" x 1/2"	359493 1" x 1" x 1/2"
359494 1" x 1" x 3/4"
Tee (Soc x Soc x Soc)
359481 1/2"	359482 3/4"	359483 1"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Product may be marked with the "IPEX" trade name only. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings+++ [2] [G]	CPVC	IPEX (AquaRise)	ASTM F439
45° Elbow (Soc x Soc)
359167 1 1/4"	359168 1 1/2"	359169 2"	359170 2 1/2"
359171 3"	359172 4"	359173 6"
90° Elbow (Soc x Soc)
359197 1 1/4"	359198 1 1/2"	359199 2"	359200 2 1/2"
359201 3"	359202 4"	359203 6"
Cap (Soc)
359112 1 1/4"	359113 1 1/2"	359114 2"	359115 2 1/2"
359116 3"	359107 4"	359108 6"
Coupling (Soc x Soc)
359135 1 1/4"	359136 1 1/2"	359137 2"	359138 2 1/2"
359139 3"	359140 4"	359141 6"
Reducer Bushing (Sp x Soc)
359384 1 1/2" x 1 1/4"	359388 2" x 1 1/4"	359389 2" x 1 1/2"	359392 2 1/2" x 2"
359393 3" x 1 1/2"	359394 3" x 2"	359395 3" x 2 1/2"	359428 4" x 1 1 /4"
359429 4" x 1 1/2"	359396 4" x 2"	359430 4" x 2 1/2"	359397 4" x 3"
359398 6" x 2"	359399 6" x 3"	359400 6" x 4"
Reducer Coupling (Soc x Soc)
359466 1 1/2" x 1 1/4"	359458 2" x 1 1/2"	359470 3" x 2"	359459 4" x 2"
359472 4" x 3"
Reducing Tee (S x S x S)
359501 2" x 2" x 1 1/2"	359506 2 1/2" x 2 1/2" x 1 1/4"	359507 2 1/2" x 2 1/2" x 2"	359502 3" x 3" x 2"
359508 4" x 4" x 2"	359509 4" x 4" x 3"	359510 6" x 6" x 2"	359511 6" x 6" x 3"
359512 6" x 6" x 4"
Sweep Fitting (S x S)[1]
091834 1 1/2"	091835 2"	091836 2 1/2"
Tee (Soc x Soc x Soc)
359484 1 1/4"	359485 1 1/2"	359486 2"	359487 2 1/2"
359488 3"	359489 4"	359490 6"
[1] The Sweep fittings are certified individually but sold as part of a (non-certified) multicomponent "Compact Loop" product. The Compact Loop product is assembled from certified sweep fittings and certified pipe. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Product may be marked with the "IPEX" trade name only. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings# +++ [2] [G]	CPVC	IPEX (AquaRise)	ASTM F1970
Union (S x S)
359520 1/2"	359521 3/4"	359522 1"	359523 1 1/4"
359524 1 1/2"	359525 2"	359051 3"	359550 4"
Van Stone Style Flange 150 lbs.
359266 1 1/2"	359267 2"	359268 3"	359270 4"
# Product tested for uses in 73°F with a rated pressure of 150 psi. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Product may be marked with the "IPEX" trade name only. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings## +++ [2] [G]	CPVC	IPEX (AquaRise)	ASTM F1970
Flange x Socket
359040 2 1/2"	359041 3"	359043 4"	359042 6"
## Product tested with metal ring kit for uses in 73°F with a rated pressure of 400 psi. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Product may be marked with the "IPEX" trade name only. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings# +++ [2] [G]	CPVC	IPEX (AquaRise)	ASTM F1970
Flange x Socket
359228 1/2"	359229 3/4"	359230 1"	359231 1 1/4"
359232 1 1/2"	359233 2"	359234 2 1/2"	359235 3"
359236 4"	359238 6"
# Product tested for uses in 73°F with a rated pressure of 150 psi. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Product may be marked with the "IPEX" trade name only. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings+++ [2] [G] #####	CPVC	IPEX (AquaRise)	ASTM F1970
Reducer Coupling (Soc x Soc)
359463 1 1/4" x 1"	359465 1 1/2" x 1"	359467 2" x 1"
Reducing Bushing (Sp x Soc)
359378 1 1/4" x 1/2"	359379 1 1/4" x 3/4"	359380 1 1/4" x 1"	359381 1 1/2" x 1/2"
359382 1 1/2" x 3/4"	359383 1 1/2" x 1"	359385 2" x 1/2"	359386 2" x 3/4"
359387 2" x 1"	359390 2 1/2" x 3/4"	359391 2 1/2" x 1"
Reducing Tee (S x S x S)
359495 1 1/4" x 1 1/4" x 1"	359515 1 1/2" x 1 1/2" x 1/2"	359496 1 1/2" x 1 1/2" x 3/4"	359497 1 1/2" x 1 1/2" x 1"
359498 2" x 2" x 1/2"	359499 2" x 2" x 3/4"	359500 2" x 2" x 1"	359503 2 1/2" x 2 1/2" x 1/2"
359504 2 1/2" x 2 1/2" x 3/4"	359505 2 1/2" x 2 1/2" x 1"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Product may be marked with the "IPEX" trade name only. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. ##### Product tested for uses in 73°F with a rated pressure of 400 psi per ASTM F1970, and 180°F with a rated pressure of 100 psi per CSA B137.6.
Fittings¢ +++ [2] [G]	CPVC	IPEX (AquaRise)	CSA B137.6
45° Elbow (Soc x Soc)
359164 1/2"	359165 3/4"	359166 1"	359167 1 1/4"
359168 1 1/2"	359169 2"	359170 2 1/2"	359171 3"
359172 4"	359173 6"
90° Elbow (Soc x Soc)
359194 1/2"	359195 3/4"	359196 1"	359197 1 1/4"
359198 1 1/2"	359199 2"	359200 2 1/2"	359201 3"
359202 4"	359203 6"
90° Street Elbow (S x S)
359175 1/2"	359176 3/4"	359177 1"
Adapter (IPS S x CTS S)
359101 3/4"	359100 1/2"
Adapter (IPS SOC x CTS S)
359098 3/4"	359097 1/2"
Cap (Soc)
359109 1/2"	359110 3/4"	359111 1"	359112 1 1/4"
359113 1 1/2"	359114 2"	359115 2 1/2"	359116 3"
359107 4"	359108 6"
Coupling (Soc x Soc)
359132 1/2"	359133 3/4"	359134 1"	359135 1 1/4"
359136 1 1/2"	359137 2"	359138 2 1/2"	359139 3"
359140 4"	359141 6"
Manifold Tee (¾" SPGx¾" SOC w/One ½" SOC Branches)
359061 3/4" x 1/2"
Manifold Tee (¾" SPGx¾" SOC w/Two ½" SOC Branches)
359060 3/4" x 1/2"
Reducer Bushing (Sp x Soc)
359375 3/4" x 1/2"	359376 1" x 1/2"	359377 1" x 3/4"	359378 1 1/4" x 1/2"
359379 1 1/4" x 3/4"	359380 1 1/4" x 1"	359381 1 1/2" x 1/2"	359382 1 1/2" x 3/4"
359383 1 1/2" x 1"	359384 1 1/2" x 1 1/4"	359385 2" x 1/2"	359386 2" x 3/4"
359387 2" x 1"	359388 2" x 1 1/4"	359389 2" x 1 1/2"	359390 2 1/2" x 3/4"
359391 2 1/2" x 1"	359392 2 1/2" x 2"	359393 3" x 1 1/2"	359394 3" x 2"
359395 3" x 2 1/2"	359428 4" x 1 1 /4"	359429 4" x 1 1/2"	359396 4" x 2"
359430 4" x 2 1/2"	359397 4" x 3"	359398 6" x 2"	359399 6" x 3"
359400 6" x 4"
Reducer Coupling (Soc x Soc)
359460 3/4" x 1/2"	359461 1" x 1/2"	359462 1" x 3/4"	359463 1 1/4" x 1"
359465 1 1/2" x 1"	359466 1 1/2" x 1 1/4"	359467 2" x 1"	359458 2" x 1 1/2"
359470 3" x 2"	359459 4" x 2"	359472 4" x 3"
Reducing Tee (S x S x S)
359513 3/4" x 1/2" x 3/4"	359514 3/4" x 1/2" x 1/2"	359492 3/4" x 3/4" x 1/2"	359493 1" x 1" x 1/2"
359494 1" x 1" x 3/4"	359495 1 1/4" x 1 1/4" x 1"	359515 1 1/2" x 1 1/2" x 1/2"	359496 1 1/2" x 1 1/2" x 3/4"
359497 1 1/2" x 1 1/2" x 1"	359498 2" x 2" x 1/2"	359499 2" x 2" x 3/4"	359500 2" x 2" x 1"
359501 2" x 2" x 1 1/2"	359503 2 1/2" x 2 1/2" x 1/2"	359504 2 1/2" x 2 1/2" x 3/4"	359505 2 1/2" x 2 1/2" x 1"
359506 2 1/2" x 2 1/2" x 1 1/4"	359507 2 1/2" x 2 1/2" x 2"	359502 3" x 3" x 2"	359508 4" x 4" x 2"
359509 4" x 4" x 3"	359510 6" x 6" x 2"	359511 6" x 6" x 3"	359512 6" x 6" x 4"
Sweep Fitting (S x S)[1]
091834 1 1/2"	091835 2"	091836 2 1/2"
Tee (Soc x Soc x Soc)
359481 1/2"	359482 3/4"	359483 1"	359484 1 1/4"
359485 1 1/2"	359486 2"	359487 2 1/2"	359488 3"
359489 4"	359490 6"
[1] The Sweep fittings are certified individually but sold as part of a (non-certified) multicomponent "Compact Loop" product. The Compact Loop product is assembled from certified sweep fittings and certified pipe. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Product may be marked with the "IPEX" trade name only. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings¢ ## +++ [2] [G]	CPVC	IPEX (AquaRise)	CSA B137.6
Flange x Socket
359040 2 1/2"	359041 3"	359043 4"	359042 6"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. ## Product tested with metal ring kit for uses in 73°F with a rated pressure of 400 psi. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Product may be marked with the "IPEX" trade name only. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings+ [G]	PVC	IPEX	ASTM D2464
45º Ell, FPT x FPT
036162 1/2"	036163 3/4"	036164 1"	036165 1 1/4"
036166 1 1/2"	036167 2"	036168 2 1/2"	036169 3"
036170 4"
90° Ell, FPT x FPT
036199 1/2"	036200 3/4"	036201 1"
Cap, FPT
036075 3/4"	036077 1 1/4"
Plug, MPT
036573 1 1/4"	036574 1 1/2"	036575 2"
Reducing Bushing, MPT x FPT
036653 3/4" x 1/2"	036656 1" x 1/2"	036657 1" x 3/4"
Tee, FPT, FPT, FPT
036819 1/2"	036820 3/4"	036821 1"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings+++ [2] [G]	CPVC	Xirtec CPVC	ASTM F439
45° Elbow, S x S
059164 1/2"	059169 2"	059173 6"
90° Elbow, S x S
059194 1/2"	059195 3/4"	059197 1 1/4"	059198 1 1/2"
059196 1"	059199 2"	059200 2 1/2"	059201 3"
90° Ell, S x S
059202 4"
90° Street Elbow
059870 1/2"	059871 3/4"	059782 1"
Cap, Soc
059109 1/2"	059118 6"
Coupling, S x S
059133 3/4"	059135 1 1/4"	059136 1 1/2"	059137 2"
059140 4"	059141 6"	059142 8"
Reducing Bushing, SP x FPT
059431 3/4" x 1/2"	059432 1" x 1/2"	059433 1" x 3/4"
Reducing Bushing, SP x S
059383 1 1/2" x 1"	059393 3" x 1 1/2"	059394 3" x 2"	059399 6" x 3"
059400 6" x 4"	059740 2 1/2" x 1/2"	059741 2 1/2" x 3/4"	059742 2 1/2" x 1"
059628 2 1/2" x 1 1/4"	059629 2 1/2" x 1 1/2"	059630 3" x 1 1/4"
Reducing Coupling, S X S
059621 1 1/4" x 1/2"	059622 1 1/4" x 3/4"	059623 1 1/2" x 1/2"	059464 1 1/2" x 3/4"
059624 2" x 3/4"	059625 2" x 1 1/4"	059626 2 1/2" x 2"
Reducing Tee, S x S x S
059602 1 1/4" x 1 1/4" x 1"	059496 1 1/2" x 3/4"	059498 2" x 1/2"	059499 2" x 3/4"
059708 2 1/2" x 1/2"	059709 2 1/2" x 3/4"	059604 2 1/2" x 1"	059605 2 1/2" x 1 1/4"
059606 2 1/2" x 1 1/2"	059607 2 1/2" x 2"	059608 3" x 2 1/2"
Sweep Fitting (S x S)[1]
091934 1 1/2"	091935 2"	091936 2 1/2"
Tee, S x S x FPT
059518 1"	059943 3/4"
Tee, S x S x S
059486 2"	059487 2 1/2"
[1] The Sweep fittings are certified individually but sold as part of a (non-certified) multicomponent "Compact Loop" product. The Compact Loop product is assembled from certified sweep fittings and certified pipe. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Product may be marked with the "IPEX" trade name only. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings# +++ [2] [G]	CPVC	Xirtec CPVC	ASTM F1970
Union (FPT x FPT) Sch 80
1/2" - 4"
Union (S x S) Sch 80
1/2" - 4"
# Product tested for uses in 73°F with a rated pressure of 150 psi. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Product may be marked with the "IPEX" trade name only. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings### +++ [2] [G]	CPVC	Xirtec CPVC	ASTM F1970
Wyes Sch 80
1 1/2" (059553)	2" (059536)
### Product tested for uses in 73°F with a rated pressure of 235 psi. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Product may be marked with the "IPEX" trade name only. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings+++ [2] [G]	CPVC	Xirtec CPVC	ASTM F1970
Flange x Socket
059469 2 1/2"*	059477 3"*	059358 4"**	059359 6"**
* Product tested with metal ring kit for uses in 73°F with a rated pressure of 420 psi. ** Product tested with metal ring kit for uses in 73°F with a rated pressure of 320 psi. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Product may be marked with the "IPEX" trade name only. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings# +++ [2] [G]	CPVC	Xirtec CPVC	ASTM F1970
Blind Flange
059254 1 1/2"	059255 2"	059257 3"	059258 4"
Flange x FPT
059245 2"
Flange x Socket
1/2" - 2"	059232 1 1/2"	059233 2"	059234 2 1/2"
059235 3"	059236 4"	059238 6"
HD Vanstone Flange
059262 1/2"	059263 3/4"	059264 1"	059265 1 1/4"
059268 2 1/2"
# Product tested for uses in 73°F with a rated pressure of 150 psi. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Product may be marked with the "IPEX" trade name only. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings+ [G]	PVC	IPEX	ASTM D2466
45° Ell, S x S
1/2" - 435481, 035481	3/4" - 435482, 035482	1" - 435483, 035483	1 1/4" - 435484, 035484
1 1/2" - 435485, 035485	2" - 035486	2 1/2" - 035487	3" - 035488
4" - 035489	5" - 035490	6" - 035491	8" - 035492
90° Elbow, MPT x S
2"
90° Elbow, S x FPT
035506, 435506 1/2"	035507 3/4"	035508 1"	435507 3/4"
90° Elbow, S x S
1/2" - 435519	3/4" - 435520	1" - 435521	1 1/4" - 435522
1 1/2" - 435523	2" - 435524	035519 1/2" W	035109 1/2" G
035520 3/4" W	035110 3/4" G	035521 1" W	035111 1" G
035522 1 1/4" W	035112 1 1/4" G	035523 1 1/2" W	035113 1 1/2" G
035524 2" W	035114 2" G	035525 2 1/2" W	035115 2 1/2" G
035526 3" W	035116 3" G	035527 4" W	035117 4" G
035528 5" W	035118 5" G	035529 6" W	035119 6" G
035530 8" W	035120 8" G
90° Elbow, SPG x FPT
2"
90° Elbow, SPG x S
2"
90° Reducing Ell, S x FPT
035515, 435515 3/4" x 1/2"	035516 1" x 1/2"	035517 1" x 3/4"	435516 1" x 1/2"
435517 1" x 3/4"	435535 3/4" x 1/2"	435536 1" x 1/2"
90° Reducing Ell, S x S
035535 3/4" x 1/2"	035536 1" x 1/2"	035978, 435978 1" x 3/4"
90° Street Ell, MPT x S
035504 1 1/2"
90°Street Ell, S x SPG
035544, 435544 1/2"	035545, 435545 3/4" (White)	035546, 435546 1"	035128 1" (Grey)
035548, 435548 1 1/2"	035549, 435549 2"
Cap, FPT
035423, 635423 1/2"	035424, 435424, 635424 3/4"	035425 1"	035426 1 1/4"
035427, 435427, 635427 1 1/2"	035428, 435428 2"
Cap, S
035407, 435407, 035017 1/2"	035408, 435408, 035018 3/4"	035409, 435409 1"	035410, 435410, 035020 1 1/4"
035411, 435411, 035021 1 1/2"	035412, 435412, 035022 2"	035414 3"	035415 4"
035416 5"	035417, 035027 6"	035418 8"
Coupling, S x S
035448, 435448 , 635448, 035052 1/2"	035449, 035449, 635449, 035053 3/4"	035450, 435450, 635450 1"	035451, 435451, 035055, 635451 1 1/4"
035452, 435452, 035056, 635452 1 1/2"	035453, 035453, 035057 2"	035454 2 1/2"	035455 3"
035456 4"	035457 5"	035458 6"	035459 8"
Cross, S x S x S x S
1/2" - 4"
Female Adapter, S x FPT
035559, 435559 1/2"	035560, 435560 3/4"	035561, 435561 1"	035562, 435562 1 1/4"
035563, 435563 1 1/2"	035564, 435564 2"	035565 2 1/2"	035566 3"
035567 4"	035568 5"	035569 6"
Male Adapter, S x MPT
035602, 435602 1/2"	035603, 435603 3/4"	035604, 435604 1"	035605, 435605 1 1/4"
035606, 435606 1 1/2"	035607, 435607 2"	035608 2 1/2"	035609 3"
035610 4"	035612 6"
Plug, MPT
035625 1 1/4"	035626, 435626, 635626 1 1/2"	435624 1"	035627 2"
Reducer Bushing, SP x FPT
035722, 435722 3/4" x 1/2"	035724, 435724, 635724 1" x 1/2"	035725, 435725, 635725 1" x 3/4"	035726 1 1/4" x 1/2"
035727, 435727 1 1/4" x 3/4"	035728 1 1/4" x 1"	035733 2" x 1/2"	035734 2" x 3/4"
035735 2" x 1"	035737 2" x 1 1/2"
Reducer Bushing, SPG x S
435646 3/4" x 1/2"	435648 1" x 1/2"	435649 1" x 3/4"	435650 1 1/4" x 1/2"
435651 1 1/4" x 3/4"	435652 1 1/4" x 1"	435653 1 1/2" x 1/2"	435654 1 1/2" x 3/4"
435655 1 1/2" x 1"	435656 1 1/2" x 1 1/4"	035657, 435657 2" x 1/2"	035658, 435658 2" x 3/4"
435659 2" x 1"	435660 2" x 1 1/4"	435661 2" x 1 1/2"	035209 3/4" x 1/2" G
035646 3/4" x 1/2" W	035211 1" x 1/2" G	035648 1" x 1/2" W	035212 1" x 3/4" G
035649 1" x 3/4" W	035213 1 1/4" x 1/2" G	035650 1 1/4" x 1/2" W	035214 1 1/4" x 3/4" G
035651 1 1/4" x 3/4" W	035215 1 1/4" x 1" G	035652 1 1/4" x 1" W	035216 1 1/2" x 1/2" G
035653 1 1/2" x 1/2" W	035217 1 1/2" x 3/4" G	035654 1 1/2" x 3/4" W	035218 1 1/2" x 1" G
035655 1 1/2" x 1" W	035219 1 1/2" x 1 1/4" G	035656 1 1/2" x 1 1/4" W	035222 2" x 1" G
035659 2" x 1" W	035223 2" x 1 1/4" G	035660 2" x 1 1/4" W	035224 2" x 1 1/2" G
035661 2" x 1 1/2" W	035227 2 1/2" x 1 1/4" G	035665 2 1/2" x 1 1/4" W	035228 2 1/2" x 1 1/2" G
035666 2 1/2" x 1 1/2" W	035229 2 1/2" x 2" G	035667 2 1/2" x 2" W	035233 3" x 1 1/2" G
035671 3" x 1 1/2" W	035234 3" x 2" G	035672 3" x 2" W	035235 3" x 2 1/2" G
035673 3" x 2 1/2" W	035238 4" x 2" G	035677 4" x 2" W	035240 4" x 3" G
035679 4" x 3" W	035684 6" x 3"	035685 6" x 4"
Reducer Tee, S x S x S
035305 3/4" x 1/2" G	435792, 035792 3/4" x 1/2" W	035794 1" x 1/2" W	035308 1" x 3/4" G
035795, 435795 1" x 3/4" W	035797 1 1/4" x 1/2" W	035312 1 1/4" x 3/4" G	035798 1 1/4" x 3/4" W
035313 1 1/4" x 1" G	035799 1 1/4" x 1" W	035800 1 1/2" x 1/2" W	035316 1 1/2" x 3/4" G
035801 1 1/2" x 3/4" W	035802 1 1/2" x 1" W	035806 2" x 1/2" W	035320 2" x 3/4" G
035807 2" x 3/4" W	035321 2" x 1" G	035808 2" x 1" W	035322 2" x 1 1/2" G
035810 2" x 1 1/2" W	035328 3" x 2" G	035822 3" x 2" W	035329 3" x 2 1/2" G
035823 3" x 2 1/2" W	035828 4" x 2" W	035829 4" x 3" W	035334 6" x 3" G
035833 6" x 3" W	035834 6" x 4" W
Reducing Bushing, MPT x FPT
035700, 435700, 635700 3/4" x 1/2"	035701, 435701,635701 1" x 1/2"	035702, 435702, 635702 1" x 3/4"
Reducing Female Adapter, S x FPT
035572 1/2" x 3/4"
Reducing Male Adapter, MPT x S
035614 1/2" x 3/4"	035617 1" x 3/4"	035973 2" x 1 1/2"
Reducing Tee, S x S x FPT
035863, 435863 3/4" x 1/2"	035865, 435865 1" x 1/2"	035866, 435866 1" x 3/4"
Reducing Tee, S x S x S
435792 3/4" x 1/2"
Tee, S x S x FPT
035851, 435851 1/2"	035852, 435852 3/4"
Tee, S x S x S
1/2" - 435775	3/4" - 435776	1" - 435777	1 1/4" - 435778
1 1/2" - 435779	2" - 435780	035775 1/2" W	035290 1/2" G
035776 3/4" W	035291 3/4" G	035777 1" W	035292 1" G
035778 1 1/4" W	035293 1 1/4" G	035779 1 1/2" W	035294 1 1/2" G
035780 2" W	035295 2" G	035781 2 1/2" W	035296 2 1/2" G
035782 3" W	035297 3" G	035783 4" W	035298 4" G
035784 5" W	035299 5" G	035785 6" W	035900 6" G
035786 8" W	035301 8" G	635776 3/4"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings+ [G]	PVC	IPEX	ASTM D2467
45° Elbow, S x S
036144 1/2"	1/2" - 6"	536149 2"
90° Elbow, S x S
1/2" - 6"	536186, 036186 2"	536187 2 1/2"	036188 3"
036189 4"
Cap, S
1/2" - 6"
Coupling, S x S
1/2" - 8"
Cross, S x S x S x S
1/2" - 3"
Female Adapter, S x FPT
036211 1/2"	036212 3/4"	036213 1"	036214 1 1/4"
036215 1 1/2"	036216 2"
Male Adapter, S x MPT
036420 1/2"	3/4" - 3"	036428 4"
Reducer Bushing, SP x S
3/4" x 1/2" - 4" x 3"	536611 1 1/2" x 3/4"	036623 3" x 1"	036625 3" x 2"
036630 4" x 3"	036633 6" x 3"	036634 6" x 4"
Reducer Coupling, S x S
3" x 2"
Reducing Bushing, Slip x FPT
036684 3/4" x 1/2"	036686 1" x 1/2"	036687 1" x 3/4"	036688 1 1/4" x 1/2"
036689 1 1/4" x 3/4"	036690 1 1/4" x 1"	036699 2" x 1 1/2"
Reducing Tee, S x S x S
3/4" x 3/4" x 1/2" - 6" x 4" x 4"
Tee, FPT x FPT x FPT
436820 3/4"
Tee, S x S x FPT
036828 1/2"	036829 3/4"	036830 1"
Tee, S x S x S
1/2" - 6"	536776 2 1/2"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings (PW)# + [G]	PVC	XIRTEC PVC	ASTM F1970
Union (S x S) Sch 80
036982, 036839 1 1/2"	036983, 036840 2"
# Product tested for uses in 73°F with a rated pressure of 150 psi. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings (PW)# + [G]	PVC	IPEX	ASTM F1970
Blind Flange
1/2" - 6"
Flange (Socketed)
1/2" - 8"
Flange (Threaded)
1" - 6"
Vanstone Flange (Spigot)
1 1/2" - 4"
Vanstone Flange with PVC Ring
036344 1/2"	036345 3/4"	036346 1"	036347 1 1/4"
036348 1 1/2"	036349 2"	036350 2 1/2"	036351 3"
036352 4"	036353 5"	036354 6"	036355 8"
# Product tested for uses in 73°F with a rated pressure of 150 psi. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings# + [G]	PVC	IPEX	ASTM F1970
Union (FPT x FPT) Sch 80
036844 1/4"
Union (FPT x FPT) Sch 40
035906 3/4"
Union (FPT x FPT) Sch 80
036845 3/8"
Union (FPT x FPT) Sch 40
035907 3/4"
Union (FPT x FPT) Sch 80
036846 1/2"
Union (FPT x FPT) Sch 40
035908 1"	035909 1 1/4"
Union (FPT x FPT) Sch 80
036847 3/4"	036848 1"
Union (FPT x FPT) Sch 40
035910 1 1/2"
Union (FPT x FPT) Sch 80
036849 1 1/4"
Union (FPT x FPT) Sch 40
035911 2"	3"
Union (FPT x FPT) Sch 80
036850 1 1/2"
Union (FPT x FPT) Sch 40
4"
Union (FPT x FPT) Sch 80
036851 2"	036852 3"	036853 4"
Union (S x S) Sch 40
035900, 235001, 435900 1/2"
Union (S x S) Sch 80
0368331/4"
Union (S x S) Sch 40
035901, 235002, 435901 3/4"
Union (S x S) Sch 80
036834 3/8"
Union (S x S) Sch 40
035902, 235003, 435902 1"
Union (S x S) Sch 80
036835 1/2"	036836 3/4"
Union (S x S) Sch 40
035903, 235004, 435903 1 1/4"
Union (S x S) Sch 80
036837 1"
Union (S x S) Sch 40
035904, 235005, 435904 1 1/2"
Union (S x S) Sch 80
036838 1 1/4"
Union (S x S) Sch 40
035905, 235006, 435905 2"
Union (S x S) Sch 80
036839, 036982 1 1/2"	036840, 036983 2"	036842 3"	036843 4"
# Product tested for uses in 73°F with a rated pressure of 150 psi. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings+ ### [G]	PVC	IPEX	ASTM F1970
Wyes Sch 80
1 1/2" (036854)
Wyes Sch 40
1 1/2" (035912)
Wyes Sch 80
2" (036855)
Wyes Sch 40
2" (035913)
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ### Product tested for uses in 73°F with a rated pressure of 235 psi. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings+++ [2] [G]	CPVC	Xirtec CPVC	ASTM F437
45° Elbow, FPT x FPT
059178 1/2"	059179 3/4"	059180 1"	059181 1 1/4"
059182 1 1/2"	059183 2"
90° Elbow, FPT x FPT
059208 1/2"	059209 3/4"	059210 1"	059215 3"
Cap, FPT
059123 1"	059125 1 1/2"	059126 2"
Reducing Bushing, MPT x FPT
059407 3/4" x 1/2"	059408 1" x 1/2"	059409 1" x 3/4"
Tee, FPT x FPT x FPT
059509 1/2"	059510 3/4"	059511 1"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Product may be marked with the "IPEX" trade name only. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings+ ¢ [G]	PVC	IPEX	CSA B137.3
45° Elbow, S x S
036152 4"	036154 6"
90° Elbow, S x S
036189 4"	036191 6"
Coupling, S x S
036098 4"	036099 6"
Male Adaptor, S x MPT
036428 4"
Reducer Bushing, Slip x S
036630 4" x 3"	036633 6" x 3"
Reducing Tee, S x S x S
036805 4" x 3"	036807 6" x 3"
Tee, S x S x S
036778 4"	036780 6"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings+ [G]	PVC	XIRTEC PVC	ASTM D2464
45º Ell, FPT x FPT
036162 1/2"	036163 3/4"	036164 1"	036165 1 1/4"
036166 1 1/2"	036167 2"	036168 2 1/2"	036169 3"
036170 4"
90° Ell, FPT x FPT
036199 1/2"	036200 3/4"	036201 1"
Cap, FPT
036075 3/4"	036077 1 1/4"
Plug, MPT
036573 1 1/4"	036574 1 1/2"	036575 2"
Reducing Bushing, MPT x FPT
036653 3/4" x 1/2"	036656 1" x 1/2"	036657 1" x 3/4"
Tee, FPT, FPT, FPT
036819 1/2"	036820 3/4"	036821 1"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings+++ [4] [G]	CPVC	IPEX (AquaRise)	ASTM F1970
Pipe Anchors , S x S
1 1/2" (359121)	2" (359122)	2 1/2" (359123)	3" (359124)
4" (359125)
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [4] Product tested for use in 73°F with a rated pressure of 400 psi. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings+++ [3] [G]	CPVC	Xirtec CPVC	ASTM F1970
Pipe Anchors, S x S
059924 1 1/2" [470 psi]	059925 2" [400 psi]	059926 2 1/2" [420 psi]	059927 3" [370 psi]
059928 4" [320 psi]
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Product tested for uses in 73F as per the specific rated pressures per size. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings+ [G]	PVC	XIRTEC PVC	ASTM D2466
45° Ell, S x S
035481, 435481 1/2"	035482, 435482 3/4"	035483, 435483 1"	035484, 435484 1 1/4"
035485, 435485 1 1/2"	035486 2"	035487 2 1/2"	035488 3"
035489 4"	035490 5"	035491 6"	035492 8"
90° Elbow, MPT x S
2"
90° Elbow, S x FPT
035506, 435506 1/2"	035507 3/4"	435507 3/4"	035508 1"
90° Elbow, S x S
035519 1/2" W	035109 1/2" G	435519 1/2"	035520 3/4" W
035110 3/4" G	435520 3/4"	035521 1" W	035111 1" G
435521 1"	035522 1 1/4" W	035521 1" W	035111 1" G
035522 1 1/4" W	035112 1 1/4" G	435522 1 1/4"	035523 1 1/2" W
035113 1 1/2" G	435523 1 1/2"	035524 2" W	035114 2" G
435524 2"	035525 2 1/2" W	035115 2 1/2" G	035526 3" W
035116 3" G	035527 4" W	035117 4" G	035528 5" W
035118 5" G	035529 6" W	035119 6" G	035530 8" W
035120 8" G
90° Elbow, SPG x FPT
2"
90° Elbow, SPG x S
2"
90° Reducing Ell, S x FPT
035515, 435515 3/4" x 1/2"	035516 1" x 1/2"	035517 1" x 3/4"	435516 1" x 1/2"
435517 1" x 3/4"	435535 3/4" x 1/2"	435536 1" x 1/2"
90° Reducing Ell, S x S
035535 3/4" x 1/2"	035536 1" x 1/2"	035978, 435978 1" x 3/4"
90° Street Ell, MPT x S
035504 1 1/2"
90°Street Ell, S x SPG
035544, 435544 1/2"	035545, 435545 3/4" (white)	035128 1" (Grey)	035546, 435546 1"
035548, 435548 1 1/2"	035549, 435549 2"
Cap, FPT
035423, 635423 1/2"	035424, 435424, 635424 3/4"	035425 1"	035426 1 1/4"
035427, 435427, 635427 1 1/2"	035428, 435428 2"
Cap, S
035407, 435407, 035017 1/2"	035408, 435408, 035018 3/4"	035409, 435409 1"	035410, 435410, 035020 1 1/4"
035411, 435411, 035021 1 1/2"	035412, 435412, 035022 2"	035414 3"	035415 4"
035416 5"	035417, 035027 6"	035418 8"
Coupling, S x S
035448, 435448 , 635448, 035052 1/2"	035449, 035449, 635449, 035053 3/4"	035450, 435450, 635450 1"	035451, 435451, 035055, 635451 1 1/4"
035452, 435452, 035056, 635452 1 1/2"	035453, 035453, 035057 2"	035454 2 1/2"	035455 3"
035456 4"	035457 5"	035458 6"	035459 8"
Cross, S x S x S x S
1/2" - 4"
Female Adapter, S x FPT
035559, 435559 1/2"	035560, 435560 3/4"	035561, 435561 1"	035562, 435562 1 1/4"
035563, 435563 1 1/2"	035564, 435564 2"	035565 2 1/2"	035566 3"
035567 4"	035568 5"	035569 6"
Male Adapter, S x MPT
035602, 435602 1/2"	035603, 435603 3/4"	035604, 435604 1"	035605, 435605 1 1/4"
035606, 435606 1 1/2"	035607, 435607 2"	035608 2 1/2"	035609 3"
035610 4"	035612 6"
Plug, MPT
035625 1 1/4"	035626, 435626, 635626 1 1/2"	435624 1"	035627 2"
Reducer Bushing, SP x FPT
035722, 435722 3/4" x 1/2"	035724, 435724, 635724 1" x 1/2"	035725, 435725, 635725 1" x 3/4"	035726 1 1/4" x 1/2"
035727, 435727 1 1/4" x 3/4"	035728 1 1/4" x 1"	035733 2" x 1/2"	035734 2" x 3/4"
035735 2" x 1"	035737 2" x 1 1/2"
Reducer Bushing, SPG x S
435646 3/4" x 1/2"	435648 1" x 1/2"	435649 1" x 3/4"	435650 1 1/4" x 1/2"
435651 1 1/4" x 3/4"	435652 1 1/4" x 1"	435653 1 1/2" x 1/2"	435654 1 1/2" x 3/4"
435655 1 1/2" x 1"	435656 1 1/2" x 1 1/4"	035657, 435657 2" x 1/2"	035658, 435658 2" x 3/4"
435659 2" x 1"	435660 2" x 1 1/4"	435661 2" x 1 1/2"	035209 3/4" x 1/2" G
035646 3/4" x 1/2" W	035211 1" x 1/2" G	035648 1" x 1/2" W	035212 1" x 3/4" G
035649 1" x 3/4" W	035213 1 1/4" x 1/2" G	035650 1 1/4" x 1/2" W	035214 1 1/4" x 3/4" G
035651 1 1/4" x 3/4" W	035215 1 1/4" x 1" G	035652 1 1/4" x 1" W	035216 1 1/2" x 1/2" G
035653 1 1/2" x 1/2" W	035217 1 1/2" x 3/4" G	035654 1 1/2" x 3/4" W	035218 1 1/2" x 1" G
035655 1 1/2" x 1" W	035219 1 1/2" x 1 1/4" G	035656 1 1/2" x 1 1/4" W	035222 2" x 1" G
035659 2" x 1" W	035223 2" x 1 1/4" G	035660 2" x 1 1/4" W	035224 2" x 1 1/2" G
035661 2" x 1 1/2" W	035227 2 1/2" x 1 1/4" G	035665 2 1/2" x 1 1/4" W	035228 2 1/2" x 1 1/2" G
035666 2 1/2" x 1 1/2" W	035229 2 1/2" x 2" G	035667 2 1/2" x 2" W	035233 3" x 1 1/2" G
035671 3" x 1 1/2" W	035234 3" x 2" G	035672 3" x 2" W	035235 3" x 2 1/2" G
035673 3" x 2 1/2" W	035238 4" x 2" G	035677 4" x 2" W	035240 4" x 3" G
035679 4" x 3" W	035684 6" x 3"	035685 6" x 4"
Reducer Tee, S x S x S
035305 3/4" x 1/2" G	435792, 035792 3/4" x 1/2" W	035794 1" x 1/2" W	035308 1" x 3/4" G
035795, 435795 1" x 3/4" W	035797 1 1/4" x 1/2" W	035312 1 1/4" x 3/4" G	035798 1 1/4" x 3/4" W
035313 1 1/4" x 1" G	035799 1 1/4" x 1" W	035800 1 1/2" x 1/2" W	035316 1 1/2" x 3/4" G
035801 1 1/2" x 3/4" W	035802 1 1/2" x 1" W	035806 2" x 1/2" W	035320 2" x 3/4" G
035807 2" x 3/4" W	035321 2" x 1" G	035808 2" x 1" W	035322 2" x 1 1/2" G
035810 2" x 1 1/2" W	035328 3" x 2" G	035822 3" x 2" W	035329 3" x 2 1/2" G
035823 3" x 2 1/2" W	035828 4" x 2" W	035829 4" x 3" W	035334 6" x 3" G
035833 6" x 3" W	035834 6" x 4" W
Reducing Bushing, MPT x FPT
035700, 435700, 635700 3/4" x 1/2"	035701, 435701,635701 1" x 1/2"	035702, 435702, 635702 1" x 3/4"
Reducing Female Adapter, S x FPT
035572 1/2" x 3/4"
Reducing Male Adapter, MPT x S
035614 1/2" x 3/4"	035617 1" x 3/4"	035973 2" x 1 1/2"
Reducing Tee, S x S x FPT
035863, 435863 3/4" x 1/2"	035865, 435865 1" x 1/2"	035866, 435866 1" x 3/4"
Tee, S x S x FPT
035851, 435851 1/2"	035852, 435852 3/4"
Tee, S x S x S
035775 1/2" W	035290 1/2" G	435775 1/2"	035776 3/4" W
035291 3/4" G	435776 3/4"	035777 1" W	035292 1" G
435777 1"	035778 1 1/4" W	035293 1 1/4" G	435778 1 1/4"
035779 1 1/2" W	035294 1 1/2" G	435779 1 1/2"	035780 2" W
035295 2" G	435780 2"	035781 2 1/2" W	035296 2 1/2" G
035782 3" W	035297 3" G	035783 4" W	035298 4" G
035784 5" W	035299 5" G	035785 6" W	035900 6" G
035786 8" W	035301 8" G	635776 3/4"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings+ [G]	PVC	XIRTEC PVC	ASTM D2467
45° Elbow, S x S
036144 1/2"	1/2" - 6"	536149 2"
90° Elbow, S x S
1/2" - 6"	536186, 036186 2"	536187 2 1/2"	036188 3"
036189 4"
Cap, S
1/2" - 6"
Coupling, S x S
1/2" - 8"
Cross, S x S x S x S
1/2" - 3"
Female Adapter, S x FPT
036211 1/2"	036212 3/4"	036213 1"	036214 1 1/4"
036215 1 1/2"	036216 2"
Male Adapter, S x MPT
036420 1/2"	3/4" - 3"	036428 4"
Reducer Bushing, SP x S
3/4" x 1/2" - 4" x 3"	536611 1 1/2" x 3/4"	036620 2 1/2"x1 1/4"	036621 2 1/2"x1 1/2"
036623 3" x 1"	036625 3" x 2"	036269 3"x1 1/4	036630 4" x 3"
036633 6" x 3"	036634 6" x 4"
Reducer Coupling, S x S
3" x 2"
Reducing Bushing, Slip x FPT
036684 3/4" x 1/2"	036686 1" x 1/2"	036687 1" x 3/4"	036688 1 1/4" x 1/2"
036689 1 1/4" x 3/4"	036690 1 1/4" x 1"	036699 2" x 1 1/2"
Reducing Coupling, S x S
036725 1 1/2"x1/2"	036726 1 1/2"x3/4"	036723 1 1/4"x3/4"
Reducing Tee, S x S x S
3/4" x 3/4" x 1/2" - 6" x 4" x 4"	036795 1 1/2"x3/4"	036797 2"x1/2"	036798 2"x3/4"
036803 3" x 2 1/2"
Tee, FPT x FPT x FPT
436820 3/4"
Tee, S x S x FPT
036828 1/2"	036829 3/4"	036830 1"
Tee, S x S x S
1/2" - 6"	536776 2 1/2"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings# + [G]	PVC	XIRTEC PVC	ASTM F1970
Union (FPT x FPT) Sch 40
035906 3/4"
Union (FPT x FPT) Sch 80
036844 1/4"
Union (FPT x FPT) Sch 40
035907 3/4"
Union (FPT x FPT) Sch 80
036845 3/8"
Union (FPT x FPT) Sch 40
035908 1"
Union (FPT x FPT) Sch 80
036846 1/2"
Union (FPT x FPT) Sch 40
035909 1 1/4"
Union (FPT x FPT) Sch 80
036847 3/4"	036848 1"
Union (FPT x FPT) Sch 40
035910 1 1/2"	035911 2"
Union (FPT x FPT) Sch 80
036849 1 1/4"	036850 1 1/2"
Union (FPT x FPT) Sch 40
3"	4"
Union (FPT x FPT) Sch 80
036851 2"	036852 3"	036853 4"
Union (S x S) Sch 40
035900, 235001, 435900 1/2"
Union (S x S) Sch 80
0368331/4"
Union (S x S) Sch 40
035901, 235002, 435901 3/4"
Union (S x S) Sch 80
036834 3/8"
Union (S x S) Sch 40
035902, 235003, 435902 1"
Union (S x S) Sch 80
036835 1/2"
Union (S x S) Sch 40
035903, 235004, 435903 1 1/4"
Union (S x S) Sch 80
036836 3/4"
Union (S x S) Sch 40
035904, 235005, 435904 1 1/2"
Union (S x S) Sch 80
036837 1"	036838 1 1/4"
Union (S x S) Sch 40
035905, 235006, 435905 2"
Union (S x S) Sch 80
036839, 036982 1 1/2"	036840, 036983 2"	036842 3"	036843 4"
# Product tested for uses in 73°F with a rated pressure of 150 psi. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Facility : Changhua, Taiwan

Industrial Applications

Product Type	Material Type	Trade Name	Product Standard
Fittings# ?	Nickel Plated Brass	Duratec	ASTM F1974
Air Valves
438038 1/2" D1 Air Valve	438039 3/4" D1 Air Valve	438040 1" D1 Air Valve
Duratec 90° Elbow
438067 3/4" D1	438068 1" D1	438080 1/2" D1
Duratec Cap
438026 1/2" D1	438027 3/4" D1	438028 1" D1
Duratec Split Ring
438047 1/2" D1	438048 3/4" D1	438049 1" D1
Duratec x Duratec Couplings
438021 1/2" D1	438022 3/4" D1	438023 1" D1	438024 3/4" D1 x 1/2" D1
438025 1" D1 x 3/4" D1
Duratec x Duratec x Duratec Tee
438010 1/2" D1 x 1/2" D1 x 1/2" D1	438011 3/4" D1 x 3/4" D1 x 3/4" D1	438012 1" D1 x 1" D1 x 1" D1	438013 3/4" D1 x 1/2" D1 x 1/2" D1
438014 3/4" D1 x 3/4" D1 x 1/2" D1	438015 3/4" D1 x 1/2" D1 x 3/4" D1	438016 1" D1 x 1" D1 x 1/2" D1	438017 1" D1 x 3/4" D1 x 3/4" D1
438018 1" D1 x 1" D1 x 3/4" D1	438019 1/2" D1 x 1/2" D1 x 1/2" FPT	438078 3/4" D1 x 3/4" D1 x 1/2" FPT
Duratec x FPT
438006 1/2" D1 x 1/2" FPT	438007 3/4" D1 x 3/4" FPT	438008 1" D1 x 1" FPT	438009 1/2" D1 x 1/2" FPT Wing Back 90’
Duratec x MPT
438002 1/2" D1 x 1/2" MPT	438003 3/4" D1 x 3/4" MPT	438004 1" D1 x 1" MPT
Duratec x Tubing Transition Fittings
438043 1/2" D1 x 1/2" Tubing	438044 3/4" D1 x 3/4" Tubing	438045 1" D1 x 1" Tubing
# This product has been evaluated for use in compressed air applications (NSF-ind) and is Certified for use with the Duratec composite pipe. ? NSF-ind is equivalent to NSF-industrial.

Facility : Kent, United Kingdom

Corrosive Waste - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings¢	PP	LABLINE	ASTM F1412
1/4 Bend
W181 1 1/2"	W182 2"	W183 3"	W184 4"
1/8 Bend
W191 1 1/2"	W192 2"	W193 3"	W194 4"
45° Wye
W371 1 1/2"	W372 2"	W373 3"	W374 4"
Cleanout Plug
W241 1 1/2"	W242 2"	W243 3"	W244 4"
Combination 45° Single Wye & 1/8 Bend
W3715 1 1/2"	W3725 2"	W3735 3"	W3745 4"
Coupling
W161 1 1/2"	W162 2"	W163 3"	W164 4"
Dilution Recovery Trap
W601 1 1/2"	W611 1 1/2"
Double Wye
W381 1 1/2"	W382 2"	W383 3"	W384 4"
Double Wye With 1/8 Bends
W3815 1 1/2"	W3825 2"	W3835 3"	W3845 4"
Fabricated Cleanout Tee
W902 2"
Female Adapter
W151 1 1/2"	W152 2"
Loose Nut 1/4 Bend
W291 1 1/2"	W292 2"	W293 3"	W294 4"
Loose Nut 1/8 Bend
W211 1 1/2"	W212 2"	W213 3"	W214 4"
Loose Nut Reducing Coupler
W3921 2" x 1 1/2"	W3931 3" x 1 1/2"	W3932 3" x 2"	W3941 4" x 1 1/2"
W3942 4" x 2"	W3943 4" x 3"
Male adapter
W141(THIN) 1 1/2"	W142 2"	W143 3"	W144 4"
No Hub Adapter
W461 1 1/2"	W462 2"	W463 3"	W464 4"
P Trap
W1021 1 1/2"	W1022 2"
P Trap (Long Radius)
WT11 1 1/2"	WT12 2"	WT13 3"	WT14 4"
Reducing 45° Wye
W3721 2" x 1 1/2"	W3731 3" x 1 1/2"	W3732 3" x 2"	W3741 4" x 1 1/2"
W3742 4" x 2"	W3743 4" x 3"
Reducing Combination Wye & 1/8 Bend
W37251 2" x 1 1/2"	W37351 3" x 1 1/2"	W37352 3" x 2"	W37451 4" x 1 1/2"
W37452 4" x 2"	W37453 4" x 3"
Reducing Double Wye
W3821 2" x 1 1/2"	W3831 3" x 1 1/2"	W3832 3" x 2"	W3841 4" x 1 1/2"
W3842 4" x 2"	W3843 4" x 3"
Reducing Double Wye & 1/8 Bend
W38251 2" x 1 1/2"	W38351 3" x 1 1/2"	W38352 3" x 2"	W38451 4" x 1 1/2"
W38452 4" x 2"	W38453 4" x 3"
Reducing Sanitary Tee
W2015 1 1/2"	W2025 2"	W2021 2" x 1 1/2"	W2035 3"
W2031 3" x 1 1/2"	W2032 3" x 2"	W2045 4"	W2041 4" x 1 1/2"
W2042 4" x 2"	W2043 4" x 3"
Sanitary Tee
W201 1 1/2"	W202 2"	W203 3"	W204 4"
Threaded Adapter
W121 1 1/2" x 1 1/4"	W131 1 1/2"
Universal Trap
W501 1 1/2"	W511 1 1/2"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Fittings¢	PP	LABLINE	CSA B181.3
1/4 Bend
W181 1 1/2"	W182 2"	W183 3"	W184 4"
1/8 Bend
W191 1 1/2"	W192 2"	W193 3"	W194 4"
45° Wye
W371 1 1/2"	W372 2"	W373 3"	W374 4"
Cleanout Plug
W241 1 1/2"	W242 2"	W243 3"	W244 4"
Combination 45° Single Wye & 1/8 Bend
W3715 1 1/2"	W3725 2"	W3735 3"	W3745 4"
Coupling
W161 1 1/2"	W162 2"	W163 3"	W164 4"
Dilution Recovery Trap
W601 1 1/2"	W611 1 1/2"
Double Wye
W381 1 1/2"	W382 2"	W383 3"	W384 4"
Double Wye With 1/8 Bends
W3815 1 1/2"	W3825 2"	W3835 3"	W3845 4"
Fabricated Cleanout Tee
W902 2"
Female Adapter
W152 2"	W151 1 1/2"
Loose Nut 1/4 Bend
W291 1 1/2"	W292 2"	W293 3"	W294 4"
Loose Nut 1/8 Bend
W211 1 1/2"	W212 2"	W213 3"	W214 4"
Loose Nut Reducing Coupler
W3921 2" x 1 1/2"	W3931 3" x 1 1/2"	W3932 3" x 2"	W3941 4" x 1 1/2"
W3942 4" x 2"	W3943 4" x 3"
Male Adapter
W141(THIN) 1 1/2"	W142 2"	W143 3"	W144 4"
No Hub Adapter
W461 1 1/2"	W462 2"	W463 3"	W464 4"
P Trap
W1021 1 1/2"	W1022 2"
P Trap (Long Radius)
WT11 1 1/2"	WT12 2"	WT13 3"	WT14 4"
Reducing 45° Wye
W3721 2" x 1 1/2"	W3731 3" x 1 1/2"	W3732 3" x 2"	W3741 4" x 1 1/2"
W3742 4" x 2"	W3743 4" x 3"
Reducing Combination Wye & 1/8 Bend
W37251 2" x 1 1/2"	W37351 3" x 1 1/2"	W37352 3" x 2"	W37451 4" x 1 1/2"
W37452 4" x 2"	W37453 4" x 3"
Reducing Double Wye
W3821 2" x 1 1/2"	W3831 3" x 1 1/2"	W3832 3" x 2"	W3841 4" x 1 1/2"
W3842 4" x 2"	W3843 4" x 3"
Reducing Double Wye & 1/8 Bend
W38251 2" x 1 1/2"	W38351 3" x 1 1/2"	W38352 3" x 2"	W38451 4" x 1 1/2"
W38452 4" x 2"	W38453 4" x 3"
Reducing Sanitary Tee
W2015 1 1/2"	W2025 2"	W2021 2" x 1 1/2"	W2035 3"
W2031 3" x 1 1/2"	W2032 3" x 2"	W2045 4"	W2041 4" x 1 1/2"
W2042 4" x 2"	W2043 4" x 3"
Sanitary Tee
W201 1 1/2"	W202 2"	W203 3"	W204 4"
Threaded Adapter
W121 1 1/2" x 1 1/4"	W131 1 1/2"
Universal Trap
W501 1 1/2"	W511 1 1/2"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Fittings^ ~	PVDF	PLENUMLINE	CSA B181.3
45° Bend
W191P 1 1/2"	W192P 2"	W193P 3"	W194P 4"
45° Loose Nut Bend
W211P 1 1/2"	W212P 2"	W213P 3"	W214P 4"
45° Wye
W371P 1 1/2"	W372P 2"	W373P 3"	W374P 4"
Bend
W181P 1 1/2"	W182 P 2"	W183P 3"	W184P 4"
Cleanout Plug
W241P 1 1/2"	W242P 2"	W243P 3"	W244P 4"
Coupling
W161P 1 1/2"	W162P 2"	W163P 3"	W164P 4"
Female Adapter
W151P 1 1/2"	W152P 2"
Loose Nut Bend
W291P 1 1/2"	W292P 2"	W293P 3"	W294P 4"
Male Adapter
W141P 1 1/2"	W142P 2"
Reducing Coupler
W3921P 2" x 1 1/2"	W3931P 3" x 1 1/2"	W3932P 3" x 2"	W3942P 4" x 2"
W3943P 4" x 3"
Reducing Tee
W2021P 2" x 1 1/2"
Tee
W201P 1 1/2"	W202P 2"	W203P 3"	W204P 4"
U Bend
W1011P 1 1/2"	W1012P 2"
^ The "P" at the end of the part number may not appear on the actual fitting. ~ Product is authorized to bear the cNSF Mark.

Number of matching Manufacturers is 1
Number of matching Products is 2516
Processing time was 0 seconds

Product Type

Material Type

Trade Name

Product Standard

Rigid Conduit* ~

FIBERTEL

CSA C22.2 No. 327

1/2" - 4", 5", 6", 8" SDR 13.5

1/2" - 4", 5", 6", 8" SDR 11

1/2" - 8" Sch 40

* Complies with requirements for use with maximum 90°C wire ~ Product is authorized to bear the cNSF Mark.