NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, January 15, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?Company=33710&Standard=014&

NSF/ANSI 14
Plastics Piping System Components and Related Materials

Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document

Westlake Pipe & Fittings Corporation
The Westlake Center
2801 Post Oak Boulevard, Suite 650
Houston, TX 77056
United States
800-999-7473
713-585-2621

Facility : Lodi, CA

Electrical Conduit and Accessories

Product Type	Material Type	Trade Name	Product Standard
Pipe*	PVC	Westlake Pipe and Fittings Corporation	UL 651
1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 3", 4", 6" Sch 40
* Complies with requirements for above ground, underground or in-door use; sunlight resistance and use with maximum 90°C wire.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings+ [1] [G]	PVC	Yelomine™ CertaLok®	ASTM D3139
2" - 4" Class 250 psi
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified for the joint design only. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PVC	AquaSpring Certa Lok® C900/RJ	AWWA C900
4" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PVC	AquaSpring Certa-Lok® RJIB pipe[2]	AWWA C900
6" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] With Fluid-Tite™ Gasket [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PVC	AquaSpring Westlake Pipe & Fittings	AWWA C900
4" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PVC	Certa-Lok® Yelomine™	ASTM D1785
2" - 6" Sch 80
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PVC	Certa-Lok® Yelomine™	ASTM D2241
2" - 12" SDR 17
4" - 16" SDR 21
6" - 16" SDR 26
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ * [G]*	PVC	Certa Lok® Yelomine™-IB	ASTM D2241
4" - 6" SDR 17
4" - 8" SDR 21
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ** Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ * [G]*	PVC	KWIK-SET®	ASTM D1785
1" - 2" Sch 80
1" - 2" Sch 120
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ** Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [3] [G]	PVC	Westlake Pipe & Fittings	ASTM D1785
1" - 2" Sch 80
1" - 2" Sch 120
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [3] Product may also be marked with trade designation Westlake Canada, Inc. DBA Westlake Pipe & Fittings. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product,product packaging, and/or
      documentation shipped with the product are Certified.

Well Casings

Product Type	Material Type	Trade Name	Product Standard
Well Casings* [1] [G]*	PVC	Certa-Lok® IB Well Casing	ASTM F480
4 1/2" SDR 17
4 1/2" SDR 26
** Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. Certa-Lok Well Casing are used only with Certa-Lok Well Casing Couplings. [1] Certa-Lok® Well Casing and Sure-Fit™ Well Casing have been specifically evaluated for well casing applications and have not been evaluated for the effects of field slotting, and Capping. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Well Casings* [1] [G]*	PVC	Certa-Lok® IB Well Casing	ASTM F480
5" - 12" SDR 17
5" - 6 1/4" SDR 21
5" SDR 26
** Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. Certa-Lok Well Casing are used only with Certa-Lok Well Casing Couplings. [1] Certa-Lok® Well Casing and Sure-Fit™ Well Casing have been specifically evaluated for well casing applications and have not been evaluated for the effects of field slotting, and Capping. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Well Casings[1] [G]	PVC	Certa-Lok® Well Casing	ASTM F480
10" - 12" SDR 17
16" SDR 21
16" SDR 26
[1] Certa-Lok® Well Casing and Sure-Fit™ Well Casing have been specifically evaluated for well casing applications and have not been evaluated for the effects of field slotting, and Capping. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Well Casings[1] [G]	PVC	Certa-Lok® Well Casing	ASTM F480
10" - 12" SDR 17
16" SDR 21
16" SDR 26
[1] Certa-Lok® Well Casing and Sure-Fit™ Well Casing have been specifically evaluated for well casing applications and have not been evaluated for the effects of field slotting, and Capping. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Well Casings* [1] [G]*	PVC	Certa-Lok® CLIC IB Well Casing	ASTM F480
4" - 4 1/2" Sch 40
4 1/2" SDR 17
** Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. Certa-Lok Well Casing are used only with Certa-Lok Well Casing Couplings. [1] Certa-Lok® Well Casing and Sure-Fit™ Well Casing have been specifically evaluated for well casing applications and have not been evaluated for the effects of field slotting, and Capping. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Well Casings* [1] [G]*	PVC	Certa-Lok® CLIC IB Well Casing	ASTM F480
5" - 12" SDR 17
5" Sch 80
** Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. Certa-Lok Well Casing are used only with Certa-Lok Well Casing Couplings. [1] Certa-Lok® Well Casing and Sure-Fit™ Well Casing have been specifically evaluated for well casing applications and have not been evaluated for the effects of field slotting, and Capping. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Well Casings[1] [G]	PVC	Sure-Fit™	ASTM F480
2" - 4 1/2" Sch 40
4 1/2" SDR 17
4" SDR 21
2" - 4 1/2" SDR 26
4" SDR SDR 32.5
[1] Certa-Lok® Well Casing and Sure-Fit™ Well Casing have been specifically evaluated for well casing applications and have not been evaluated for the effects of field slotting, and Capping. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Well Casings[1] [G]	PVC	Sure-Fit™	ASTM F480
5" - 16" Sch 40
6" - 8" Sch 80
5" - 6 1/4" SDR 17
5" - 12" SDR 21
5" - 16" SDR 26
6 1/4" SDR 27.6
5" SDR 32.5
[1] Certa-Lok® Well Casing and Sure-Fit™ Well Casing have been specifically evaluated for well casing applications and have not been evaluated for the effects of field slotting, and Capping. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product,product packaging, and/or
      documentation shipped with the product are Certified.

Facility : McPherson, KS

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings+ [G]	PVC	Certa-Lok® C900/RJ	AWWA C900
4" - 12" Class 305 psi
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings+ [1] [G]	PVC	Certa-Lok® Yelomine™	ASTM D3139
2" - 16"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified for the joint design only. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings+ [1] [3] [G]	PVC	Yelomine™ CertaLok®	ASTM D3139
2" - 4" Class 250 psi
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified for the joint design only. [3] Product may also be marked with trade designation Westlake Canada, Inc. DBA Westlake Pipe & Fittings, or AquaSpring. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [3] [G]	PVC	Certa-Lok® RJIB pipe	AWWA C900
4"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [3] Product may also be marked with trade designation Westlake Canada, Inc. DBA Westlake Pipe & Fittings, or AquaSpring. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PVC	Certa-Lok® RJIB pipe with Fluid-Tite™ Gasket	AWWA C900
6" - 16"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [3] [G]	PVC	Certa Lok® C900/RJ	AWWA C900
4" - 16"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [3] Product may also be marked with trade designation Westlake Canada, Inc. DBA Westlake Pipe & Fittings, or AquaSpring. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [2] [G]	PVC	Certa Lok® Yelomine™	ASTM D1785
2" - 6" Sch 80
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Sockets and gasketed bell-ends are not tested or Certified by NSF International for this production facility. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [2] [G]	PVC	Certa Lok® Yelomine™	ASTM D2241
2" - 12" SDR 17
4" - 16" SDR 21
6" - 16" SDR 26
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Sockets and gasketed bell-ends are not tested or Certified by NSF International for this production facility. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [2] [G]	PVC	Certa Lok® Yelomine™-IB	ASTM D2241
4" - 6" SDR 17
4" - 8" SDR 21
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Sockets and gasketed bell-ends are not tested or Certified by NSF International for this production facility. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [2] [3] [G]	PVC	Westlake Pipe & Fittings	ASTM D1785
1/2" - 12" Sch 40
1/2" - 12" Sch 80
1" - 2" Sch 120
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Sockets and gasketed bell-ends are not tested or Certified by NSF International for this production facility. [3] Product may also be marked with trade designation Westlake Canada, Inc. DBA Westlake Pipe & Fittings, or AquaSpring. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [2] [G]	PVC	KWIK-SET®	ASTM D1785
1" - 2" Sch 80
1" - 2" Sch 120
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Sockets and gasketed bell-ends are not tested or Certified by NSF International for this production facility. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [2] [3] [G]	PVC	Westlake Pipe & Fittings	ASTM D2241
1/2" - 6" SDR 13.5
1 1/2" - 12" SDR 17
3/4" - 12" SDR 21
1" - 18" SDR 26
1 1/4" - 18" SDR 32.5
3"- 12" SDR 41
6" - 12" SDR 51
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Sockets and gasketed bell-ends are not tested or Certified by NSF International for this production facility. [3] Product may also be marked with trade designation Westlake Canada, Inc. DBA Westlake Pipe & Fittings, or AquaSpring. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product,product packaging, and/or
      documentation shipped with the product are Certified.

Well Casings

Product Type	Material Type	Trade Name	Product Standard
Well Casings* [1] [G]*	PVC	Certa-Lok® CLIC IB Well Casing	ASTM F480
4 1/2" SDR 17
4" - 4 1/2"" Sch 40
** Sockets and gasketed bell-ends are not tested or Certified by NSF International for this production facility. Certa-Lok Well Casing are used only with Certa-Lok Well Casing Couplings. [1] Certa-Lok® Well Casing and Sure-Fit™ Well Casing have been specifically evaluated for well casing applications and have not been evaluated for the effects of field slotting, and capping. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Well Casings* [1] [G]*	PVC	Certa-Lok® CLIC IB Well Casing	ASTM F480
16" SDR 26
5" Sch 80
5" - 12" SDR 17
** Sockets and gasketed bell-ends are not tested or Certified by NSF International for this production facility. Certa-Lok Well Casing are used only with Certa-Lok Well Casing Couplings. [1] Certa-Lok® Well Casing and Sure-Fit™ Well Casing have been specifically evaluated for well casing applications and have not been evaluated for the effects of field slotting, and capping. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Well Casings* [1] [G]*	PVC	Certa-Lok® IB Well Casing	ASTM F480
4" - 4 1/2" Sch 40
4 1/2" SDR 17
4 1/2" SDR 26
** Sockets and gasketed bell-ends are not tested or Certified by NSF International for this production facility. Certa-Lok Well Casing are used only with Certa-Lok Well Casing Couplings. [1] Certa-Lok® Well Casing and Sure-Fit™ Well Casing have been specifically evaluated for well casing applications and have not been evaluated for the effects of field slotting, and capping. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Well Casings* [1] [G]*	PVC	Certa-Lok® IB Well Casing	ASTM F480
5" - 12" SDR 17
5" - 6 1/4" SDR 21
5" SDR 26
6 1/4" SDR 27.6
** Sockets and gasketed bell-ends are not tested or Certified by NSF International for this production facility. Certa-Lok Well Casing are used only with Certa-Lok Well Casing Couplings. [1] Certa-Lok® Well Casing and Sure-Fit™ Well Casing have been specifically evaluated for well casing applications and have not been evaluated for the effects of field slotting, and capping. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Well Casings[1] [G]	PVC	Certa-Lok® Well Casing	ASTM F480
16" Sch 40
10" - 12" SDR 17
16" SDR 21
16" SDR 26
[1] Certa-Lok® Well Casing and Sure-Fit™ Well Casing have been specifically evaluated for well casing applications and have not been evaluated for the effects of field slotting, and capping. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Well Casings[1] [G]	PVC	Sure-Fit™	ASTM F480
2" - 4 1/2" Sch 40
4 1/2" SDR 17
4" SDR 21
2" - 4 1/2" SDR 26
4" SDR 32.5
[1] Certa-Lok® Well Casing and Sure-Fit™ Well Casing have been specifically evaluated for well casing applications and have not been evaluated for the effects of field slotting, and capping. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Well Casings[1] [G]	PVC	Sure-Fit™	ASTM F480
5" - 16" Sch 40
6" - 8" Sch 80
5" - 6 1/4" SDR 17
5" - 12" SDR 21
5" - 16" SDR 26
6 1/4" SDR 27.6
5" SDR 32.5
[1] Certa-Lok® Well Casing and Sure-Fit™ Well Casing have been specifically evaluated for well casing applications and have not been evaluated for the effects of field slotting, and capping. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Well Casings[2] [G]	PVC	Westlake Pipe & Fittings	ASTM F480
2" - 4 1/2" Sch 40
2" - 4 1/2" SDR 17
2" - 4 1/2" SDR 21
2" - 4 1/2" SDR 26
[2] Product may also be marked with trade designation Westlake Canada, Inc. DBA Westlake Pipe & Fittings or AquaSpring®. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Well Casings[2] [G]	PVC	Westlake Pipe & Fittings	ASTM F480
5" - 16" Sch 40
5" - 16" SDR 17
5" - 16" SDR 21
5" - 16" SDR 26
[2] Product may also be marked with trade designation Westlake Canada, Inc. DBA Westlake Pipe & Fittings or AquaSpring®. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product,product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Shelby Township, MI

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Gasketed DWV Fittings! [2] [3]	PVC		ASTM D3212
1/16 Bend (22-1/2) (G x G) 4" - 8"
T1704*	T1706*	T1708*
1/16 Bend (22-1/2) (G x Sp) 4" - 8"
T1714*	T1716*	T1718*
1/4 Bend (90) (G x G) 4" – 8"
T204*	T206*	T208*
1/4 Bend (90) (G x Sp) 4" – 8"
T224*	T226*	T228*
1/4 Bend (90) Long (G x G) 4" – 8"
T256*	T257*	T258*
1/4 Bend (90) Long (G x Sp) 4" – 8"
T274*	T277*	T278*
1/8 Bend (45) (G x G) 4" – 8"
T504	T506	T508*
1/8 Bend (45) (G x Sp) 4" - 8"
T404	T406	T408*
2-Way Cleanout (G x G x G) 4" – 6"
T1004*	T1006*
45 Degree Wye (G x G x G) 4" – 8"
T304*	T306	T306-4*	T308*
T308-4	T308-6
45 Degree Wye With DWV Branch(G x G x DWV H) 4"–8"
T334*	T336*	T336-4*	T338*
T338-4*	T338-6*
Cap 4" - 8"
T1604	T1606	T1608
Concentric Increaser Bushing (G x Sp) 4" - 8"
T1216*	T1219*	T1220*
Concentric Increaser Coupling (G x G) 4" - 8"
T606-4*	T608-4*	T608-6*
Double Wye (G x G x G x G) 4" – 6"
T366-4*	T366-6*
Gasketed DWV Adapter (DWV Sp x G) 4" - 8"
D904	D906	D908
Repair Coupling (G x G) 4" - 8"
T624	T626	T628
Sanitary Tee (G x G x G) 4" – 8"
T156*	T157*	T157-4*	T158*
T158-4*	T158-6*
Sanitary Tee With DWV Branch (G x G x DWV H) 4"–8"
T194*	T196*	T196-4*	T198*
T198-4*	T198-6*
Stop Coupling (G x G) 4" - 8"
T604	T606	T608
Straight Tee (G x G x G) 4" – 8"
T104*	T106*	T106-4*	T108*
T108-4*	T108-6
Straight Tee With S/W DWV Branch (GxGxDWV H)4"– 8"
T134*	T136*	T136-4*	T138*
T138-4*	T138-6
* Fitting is an assembly of molded, NSF Listed fittings. ! I.P.S. Gasketed Non-Pressure DWV Fittings [2] Trade Names can be represented by PTI, PTI-Logo, Plastic Trend, Inc, Royal Pipe Systems or NAPCO. [3] Product is Certified for the joint design only.
Solvent Weld DWV Fittings§ [2]	PVC	Plastic Trends, Inc.	ASTM D2665
1/16 Bend (22-1/2 Degree) (H x H) 1 1/2" – 12"
D1701	D17010	D17012	D1702
D1703	D1704	D1706	D1708
1/16 Bend (22-1/2 Degree) (Sp x H) 1 1/2" – 12"
D1711	D17110	D17112	D1712
D1714	D1716	D1718
1/4 Bend (90 Degree) (H x H) 4" - 8"
D2510*	D2512*	D256	D257
D258
1/4 Bend (90 Degree) (Sp x H) 4" - 8"
D2710*	D2712*	D274	D277
D278
1/4 Bend (90 Degree) Vent (H x H) 1 1/2" – 12"
D201	D2010	D2012	D202
D203	D204	D206	D208
1/4 Bend (90 Degree) Vent (Sp x H) 4" – 12"
D221	D2210	D2212	D222
D223	D224*	D226*	D228
1/4 Bend (90°) Extra Long Sweep (S x H) 1 1/2 - 6"
D261	D262	D263	D264
D266
1/4 Bend (90°) Extra Long Sweep (S x H) 1 1/2"-6"
D281	D282	D283	D284
D286
1/4 Bend (90°) Long Sweep (H x H) 1 1/2" - 3"
D251	D252	D253
1/4 Bend (90°) Long Sweep (S x H) 1 1/2 - 3"
D271	D272	D273
1/4 Bend (90°) w/Side Inlet (H x H x H) 1 1/2 - 3"
D253-1SI	D253-2SI
1/6 Bend (60°) (H x H) 1 1/2" - 4"
D161	D162	D163	D164
1/6 Bend (60°) (S x H) 1 1/2" - 4"
D181	D182	D183	D184
1/8 Bend (45 Degree) (H x H) 4" – 12"
D5010	D5012	D504	D506
D508
1/8 Bend (45 Degree) (Sp x H) 4" – 12"
D4010	D4012	D404	D406
D408
1/8 Bend (45°) Long (H x H) 1 1/2" - 6"
D501LS	D502LS	D503LS	D504LS
D506LS
1/8 Bend (45°) Long (S x H) 1 1/2" - 6"
D401LS	D402LS	D403LS	D404LS
D406LS
1/8 Bend (45°) Short (H x H) 1 1/2" - 12"
D5010SS	D5012SS	D501Ss	D502SS
D503SS	D504SS	D506SS	S508SS
1/8 Bend (45°) Short (S x H) 1 1/2" - 12"
D4010SS	D4012SS	D401SS	D402SS
D403SS	D404SS	D406SS	D408S
2-Way Cleanout (H x H x H) 3" – 6"
D1003	D1004	D1006
45 Degree Wye (H x H x H) 1 1/2" - 12"
D301	D3010	D3010-4	D3010-6
D3010-8	D3012	D3012-10	D3012-4
D3012-6	D3012-8	D302	D302-1
D302-1-1	D303	D303-2	D3031
D304	D304-1	D304-2	D304-3
D306	D306-4	D308	D308-4
D308-6
45° Wye (S x H x H) 1 1/2" - 4"
D321	D322	D323	D323-1
D323-2	D324	D324-1	D324-2
D324-3
Cap 4" – 12"
D16010	D16012	D1604	D1606
D1608
Cast Iron Soil Pipe Hub Adapter (H x S) 2" - 4"
D802	D803	D804
Closet Bend - Reducing (SP x H) 3" - 4"
D253-4CB	D254-3CB
Closet Flange (One Piece) Hub 3" - 4"
D1803F	D1803SF	D1804	D1804S
Closet Flange (One Piece) Spigot 3" - 4"
D1823	D1824
Closet Flange Adj w/KO & Plastic Ring(SPIGOT)4"x3"
D1823KOPR
Closet Flange Adj w/KO and Plastic Ring (HUB)3"-4"
D1803KOPR	D1803SKOPR
Closet Flange Offset Adj. w/ Plastic Ring 4" x 3"
D1803SOSPR
Closet Flange Offset Adj. w/Metal Ring 4" x 3"
D1803SOSMR
Closet Flange w/Adj. Metal Ring (HUB) 3" - 4"
D1803MR	D1803SMR	D1804MR	D1804SMR
Closet Flange w/Adj. Metal Ring (SPIGOT) 3" - 4"
D1823MR	D1824MR
Closet Flange w/Adj. Metal Ring w/KO(SPIGOT) 3"-4"
D1823KOMR	D1824KOMR
Closet Flange w/Adj. Plastic Ring (HUB) 3" - 4"
D1803PR	D1803SPR	D1804PR	D1804SPR
Closet Flange w/Adj. Plastic Ring (SPIGOT) 3" - 4"
D1823PR	D1824PR
Closet Flange w/Adj.Metal Ring w/KO (HUB) 3" - 4"
D1803KOMR	D1803SKOMR	D1804KOMR	D1804SKOMR
Closet Flange w/Knock Out (One Piece) Hub 3" - 4"
D1803FKO	D1803SFKO	D1804KO	D1804SKO
Closet Flange w/Knock Out (One Piece) Spigot 3"-4"
D1823KO	D1824KO
Closet Flng w/45° Discharge Adj w/Plastic Ring[4]
D1803-45PR
Combo Wye & 1/8 Bend (H x H x H)
D1654*	D1656*	D1656-4*	D1658*
D1658-4*	D1658-6*
Combo Wye & 1/8 Bend (HxHxHxH) (Two Piece) 1 ½"-4"
D1651*	D1652*	D1653*	D1653-2*
D1654-1*	D1654-2*	D1654-3*
Concentric Reducer Bushing (Sp x H) 1/2" – 12"
D1210-4	D1210-6	D1210-8	D1212-10
D1212-4	D1212-6	D1212-8	D1216
D1217	D1218
Concentric Reducer Coupling (H x H) 1 1/2" – 12"
D6010-4	D6010-6	D6010-8	D6012-10
D6012-4	D6012-6	D6012-8	D602-1
D603-1	D603-2	D604-3	D606-4
D608-4	D608-6
Countersunk Plug 4" – 12"
D11410	D11412	D1144	D1146
D1148
Dbl Long Radius Sanitary Tee (HxHxH)(1 Piece)2"-4"
D1643D	D1644-2D	D1644-3D
Dbl San. Teew/Side Inlet All Hub(HxHxHxHxHSI)1½-4"
D153-1DS	D153-2DS	D154-2DS
Double 1/4 Bend (90°) Long Sweep (H x H) 1 1/2"-3"
D251D	D252-1D	D252D	D253D
Double 45 Degree Wye (H x H x H x H) 4" – 6"
D366-4	D366-6
Double 45° Wye (H x H x H) 1 1/2" - 6"
D361	D362	D362-1	D362-1-2
D3621-1	D363	D363-1	D363-2
D364-2	D364-3	D366	DL364
Double Combo Wye&1/8 Bend All Hub 3pc (HxHxH)1½-4"
D1652-1D	D1653-1D	D1653-2D	D1654-2D
D1654-3D
Double Fixture Fittings (HxHxHxH) 2" x 1½" x 1½"
D1642-1-1DF
Double Sanitary Tee (H x H) 1 1/2" - 4"
D151D	D152-1D	D152D	D153-1D
D153-2D	D153D	D154-1D	D154-2D
D154-3D	D154D
Double Sanitary Tee (S x H) 1 1/2" - 4"
D171D	D172-1D	D172D	D173-1D
D173-2D	D173D	D174-1D	D174-2D
D174-3D	D174D
Double Sanitary Tee w/ Two Side Inlets All Hub[5]
D153-1LR	D153-2LR	D154-2LR
Downspout Adapter (Dnsp x Dnsp x H) 4"
D1904	D1906
End Cap (H) 1 1/2" - 3"
D1601	D1602	D1603
Female Adapter (H x FIPT) 1 1/2" -12"
D1401	D14010	D14012	D1402
D1403	D1404	D1406	D1408
Female Adapter With Countersunk Plug (H x FIPT)
D8401*	D84010*	D84012*	D8402*
D8403*	D8404*	D8406*	D8408*
Female Adapter With Raised Plug (H x FIPT)
D9401*	D94010*	D94012*	D9402*
D9403*	D9404*	D9406*	D9408*
Fitting Cleanout Adapter (Sp x FIPT) 1 1/2" - 12"
D1501	D15010	D15012	D1502
D1503	D1504	D1506	D1508
Fitting Cleanout With Countersunk Plug (Sp x FIPT)
D8501*	D85010*	D85012*	D8502*
D8503*	D8504*	D8506*	D8508*
Fitting Cleanout With Raised Plug (Sp x FIPT)
D95010*	D95012*	D9504*	D9506*
D9508*
Flush Reducer Bushing (S x H) 1" - 12"
D12501-1	D12502-0	D12502-1	D12503-1
D12503-2	D12504-1	D12504-2	D12504-3
D12506-3	D12506-4	D12508-4	D12508-6
D12510-3	D12510-4	D12510-6	D12510-8
D12512-10	D12512-3	D12512-4	D12512-6
D12512-8
Flush Thread Reducer Bushing ( SP x FPT) 1 1/2"-2"
D12501-75T	D12502-1T
Flushmount Downspout Adapter (Dnsp x Dnsp x H) 6"
D1928
Long Radius Sanitary Tee(HxHxH)(One-piece) 1½"- 4"
D1641	D1642	D1642-1	D1642-1-1
D1643	D1643-1	D1643-2	D1644
D1644-1	D1644-2	D1644-2	D1644-3
Male Adapter (H x MIPT) 1 1/2" – 6"
D1301	D1302	D1303	D1304
D1306
No Hub Cast Iron Adapter (MJ)(MJS x H) 2" - 4"
D6522	D6523	D6524
P-Trap (H x H) 1 1/2" - 2"
D1811PU	D1822PU
P-Trap Low Profile (H x H) 1 1/2" - 2"
D1811PLP	D1822PLP
P-Trap w/ Cleanout (H x H) 1 1/2"
D1811PC
Repair Coupling (H x H) 1 1/2" – 12"
D621	D6210	D6212	D622
D623	D624	D626	D628
Sanitary Tee (H x H x H) 1 1/2" - 8"
D151	D152	D152-1	D152-1-1
D152-1-2	D153	D153-1	D153-2
D154-1	D154-2	D154-3	D156
D156	D157	D157-4	D158
D158-4	D158-6
Sanitary Tee (T-Y) (S x H x H) 1 1/2" - 4"
D171	D172	D172-1	D172-1-1
D172-1-2	D173	D173-1	D173-2
D174	D174-1	D174-2	D174-3
Sanitary Tee w/Left Side Inlet (HxHxHxH) 1 1/2"-4"
D153-1L	D153-2L	D154-2L
Sanitary Tee w/Right Side Inlet (HxHxHxH) 1 ½"-4"
D153-1R	D153-2R	D154-2R
Sanitary Tee w/Two Side Inlets (HxHxHxH) 1 ½-4"
D153-1LR	D153-2LR	D154-2LR
Spigot Plug 4" - 8"
T11610	T11612	T1164	T1166
T1168
Stop Coupling (H x H) 1 1/2" – 12"
D601	D6010	D6012	D602
D603	D604	D606	D608
Straight Tee (H x H x H) 1 1/2" – 12"
D101	D1010	D1010-4	D1010-6
D1010-8	D1012	D1012-10	D1012-4
D1012-6	D1012-8	D102	D103
D104	D106	D106-4	D108
D108-4	D108-6
Swivel Strainer Adapter - Female (SxSwivel Nut) 1½
D1451SWN
Swivel Strainer Adapter - Male (SxSwivel Nut) 1 ½"
D1351SWN
Tail Piece Adpt w/Plastic Nut (SxSLIP) 1 1/4" - 2"
D8551-0N	D8551N
Tee Cross (H x H x H x H) 8"
D1798
Test (Vent, Straight) Tee (H x H x FIPT) 4" – 12"
D11010	D11010-4	D11010-6	D11010-8
D11012	D11012-10	D11012-4	D11012-6
D11012-8	D1104	D1106	D1106-4
D1108	D1108-4	D1108-6
Test Tee With Countersunk Plug(H x H x FIPT)4"–12"
D12801*	D12802*	D12803*	D12804*
D12806*	D12806-4*	D12808*	D12808-4*
D12808-6*	D12810*	D12810-4*	D12810-6*
D12810-8*	D12812*	D12812-10*	D12812-4*
D12812-6*	D12812-8*
Test Tee With Raised Plug (H x H x FIPT) 1 ½"–12"
D1101*	D1102*	D1103*	D12901*
D12902*	D12903*	D12904*	D12906*
D12906-4*	D12908*	D12908-4*	D12908-6*
D12910*	D12910-4*	D12910-6*	D12910-8*
D12912*	D12912-10*	D12912-4*	D12912-6*
D12912-8*
Threaded Plug 4" – 12"
D11510	D11512	D1154	D1156
D1158
Threaded Plug Countersunk (MPT) 1 1/2" - 3"
D1141	D1142	D1143
Threaded Plug Raised (MPT) 1 1/2" - 3"
D1151	D1152	D1153
Trap Adapter (SP x MPT) 1 1/4" - 2
D1351	D1351-0	D1352
Trap Adapter - 90° Bend (H x SLIP) 1 1/4" - 1 1/2"
D251-0TAN	D251TAN
Trap Adapter - Female (S x SLIP) 1 1/4" - 2"
D1451	D1451-0	D1452
Trap Adapter - Male w/Plastic Nut (SxSLIP) 1 ¼"-2"
D1351-0N	D1351N	D1352N
Trap Adapter - Sanitary Tee (H x H x SLIP) 1 1/2"
D151TAN
Trap Adapter-Female w/Plastic Nut (HxSLIP) 1 ¼"-2"
D1451-0N	D1451N	D1452N
U Bend 4" – 6"
D1844*	D1866*
Upright Combination Wye & 1/8" Bend(HxHxH) 1 ½"-2"
D1652-1U*	D1652U*	D1653-1U*	D1653-2U*
D1653U*
Vertical Riser Adapter (Sp x Sp) 4" – 6"
T984	T986
¼Bend(90°)w/Low Heel Inlet(HxHxH)(Long Sweep)1½-4"
D253-1LH	D253-2LH	D254-2LH
¼Bend(90°)w/Low Heel Inlet(SxHxH)(Long Sweep)1½-4"
D273-1LH	D273-2LH	D274-2LH
¼Bnd(90°)w/Low Heel Inlt(HxHxH)(X-Long Sweep)2"-4"
D263-2LH
* Fitting is an assembly of molded, NSF Listed fittings. [4] 4"x3"x45D [5] (H x H x H x HSI x HSI) 1 1/2"– 4" § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [2] Trade Names can be represented by PTI, PTI-Logo, Plastic Trend, Inc, Royal Pipe Systems or NAPCO.
Fittings (Fabricated)[2]	PVC	Royal Pipe Systems	ASTM F1866
11.25° Bends (H x S) 4" thru 24"
22.5° Bends (H x H) 4" thru 24"
22.5° Bends (H x S) 4" thru 24"
30" Sanded Stubs (Spigot) 4" thru 24"
45° Bends (H x H) 4" thru 24"
45° Bends (H x S) 4" thru 24"
60° Bends (H x H) 4" thru 24"
90° Bends (H x H) 4" thru 24"
90° Bends (H x S) 4" thru 24"
Cleanout Fittings 4" thru 24"
Coupling (H x H) 4" thru 24"
Double Wye 4" thru 24"
Hubbed Caps 4" thru 24"
Increaser Coupling (H x H) 4" thru 24"
Line Cleanout Fittings 4" thru 24"
Reducer Bushing (H x S) 4" thru 24"
Tee 4" thru 24"
Tee Wye 4" thru 24"
Wye 4" thru 24"
[2] Trade Names can be represented by PTI, PTI-Logo, Plastic Trend, Inc, Royal Pipe Systems or NAPCO.
Fittings (Fabricated)[2]	PVC	Royal Pipe Systems	ASTM F1866
11.25° Bends (H x S) 4" – 24"
22.5° Bends (H x H) 4" – 24"
22.5° Bends (H x S) 4" – 24"
30" Sanded Stubs (Spigot) 4" – 24"
45° Bends (H x H) 4" – 24"
45° Bends (H x S) 4" – 24"
60° Bends (H x H) 4" – 24"
90° Bends (H x H) 4" – 24"
90° Bends (H x S) 4" – 24"
Cleanout Fittings 4" – 24"
Coupling (H x H) 4" – 24"
Double Wye 4" – 24"
Hubbed Caps 4" – 24"
Increaser Coupling (H x H) 4" – 24"
Line Cleanout Fittings 4" – 24"
Reducer Bushing (H x S) 4" – 24"
Tee 4" – 24"
Tee Wye 4" – 24"
Wye 4" – 24"
[2] Trade Names can be represented by PTI, PTI-Logo, Plastic Trend, Inc, Royal Pipe Systems or NAPCO.

[1] Gasketed fittings Certified to ASTM D3139 have a pressure rating of 160 psi.  The
    end-use for these fittings is for gravity sewer applications only.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings+ [1] [G]	PVC	Yelomine™ CertaLok®	ASTM D3139
2" - 4" Class 250 psi
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is Certified for the joint design only. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Sewer Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Gasketed Sewer Fittings# [1]	PVC		ASTM F1336
1/16 Bend (22-1/2) (G x G) 4" – 12"
H17010	H17012	H1704	H1706
H1708
1/16 Bend (22-1/2) G x Sp) 4" – 12"
H17110	H17112	H1714	H1716
H1718
1/4 Bend (90) (G x G) 4" – 12"
H2010	H2012	H204	H206
H208
1/4 Bend (90) (G x Sp) 4" – 12"
H2210	H2212	H224	H226
H228
1/4 Bend (90) Long Turn (G x G) 4" - 8"
H2510*	H2512*	H256	H257
H258
1/4 Bend (90) Long Turn (G x Sp) 4" - 8"
H2710*	H2712*	H274	H277
H278
1/8 Bend (45) (G x G) 4" – 12"
H5010	H5012	H504	H506
H508
1/8 Bend (45) (G x Sp) 4" – 12"
H4010	H4012	H404	H406
H408
2-Way Cleanout (G x G x G) 4" – 6"
H1004	H1006
45 Degree Wye (G x G x G) 10" - 12"
H3010-4*	H3010-6*	H3012-4*	H3012-6*
45 Degree Wye (G x G x G) 4"-8"
H304	H306	H306-4	H308
H308-4	H308-6
45 Degree Wye with DWV Branch (G x G x DWV G)4"-8"
H318-4	H318-6
45 Degree Wye with DWV Branch (G x G x DWV H)4"-8"
H338-4	H338-6
Cap 4" - 8"
H1604	H1606	H1608
Combo Wye & 1/8 Bend (G x G x G) 4" - 8"
H1654*	H1656*	H1656-4*	H1658-4*
H1658-6*
Concentric Increaser Bushing (Spx G) 4" - 8"
H1216	H1219	H1220
Concentric Increaser Coupling (G x G) 4" - 8"
H606-4	H608-4	H608-6
DWV Adapter Sleeve (DWV Sp x G) 4" – 6"
H1208	H1209
Deep Socket 1/16 Bend (22-1/2) (G x G) 6"
H17066
Deep Socket 1/16 Bend (22-1/2) (G x Sp) 6"
H17166
Deep Socket 1/8 Bend (45) (G x G) 6"
H5066
Deep Socket 1/8 Bend (45) (G x Sp) 6"
H4066
Double Wye (G x G x G x G) 4" – 6"
H366-4	H366-6
Eccentric Increaser Bushing (Sp x G) 6" x 4"
H1306-4
Eccentric Increaser Coupling (G x G) 6" x 4"
H616-4
Gasketed DWV Adapter Bushing (Sp x DWV G) 4" – 6"
H1213	H1214	H1215
Gasketed DWV Adapter Coupling (G x DWV G) 4" - 8"
H657	H658	H659
Gasketed Sewer Adapter (H x DWV G) 4" – 6"
H954	H956	H956-4
Gasketed Sewer Adapter (H x G) 4" - 8"
H644	H646	H646-4	H648
Gasketed Sewer Adapter (Sp x G) 4" – 6"
H904	H906
Repair Coupling (G x G) 4" - 8"
H624	H626	H628
Sanitary Tee (G x G x G) 4" - 8"
H156	H157	H157-4	H158
H158-4	H158-6
Sanitary Tee (G x G x Sp) 4" - 8"
H174*	H177*	H177-4*	H178*
H178-4	H178-6
Sanitary Tee With DWV Branch (G x G x DWV G) 4"-8"
H188-4*	H188-6*
Sanitary Tee With DWV Branch(G x G x S/W DWV)4"-8"
H198-4	H198-6
Spigot Plug 4" - 8"
H1164	H1166	H1168
Stop Coupling (G x G) 4" - 8"
H604	H606	H608
Straight Tee (G x G x G) 4" – 12"
H1010	H1010-4	H1010-6	H1010-8
H1012	H1012-10	H1012-4	H1012-6
H1012-8	H104	H106	H106-4
H108	H108-4	H108-6
Straight Tee (G x G x Sp) 4"
H124*	H126	H126-4	H128
H128-4	H128-6
Straight Tee with DWV Branch (G x G x DWV G) 4"-8"
H118-4	H118-6
Straight Tee with DWV Branch (G x G x DWV H) 4"-8"
H1310-4*	H1310-6*	H1312-4*	H1312-6*
H138-4	H138-6
Vertical Riser Adapter (Sp x Sp) 4" – 6"
H984	H986	H988
* Fitting is an assembly of molded, NSF Listed fittings. # Heavy Wall Gasketed Sewer Fittings SDR 26. [1] Trade Names can be represented by PTI, PTI-Logo, Plastic Trend, Inc, Royal Pipe Systems or NAPCO.
Gasketed Sewer Fittings$ [1]	PVC		ASTM F1336
1/16 Bend (22-1/2 Degree) (G x G) 4" – 12"
G17010	G17012	G1704	G1706
G1708
1/16 Bend (22-1/2 Degree) (Sp x G) 4" – 12"
G17110	G17112	G1714	G1716
G1718
1/4 Bend (90 Degree) (G x G) 4" – 12"
G2010	G2012	G204	G206
G208
1/4 Bend (90 Degree) (Sp x G) 4" – 12"
G2210	G2212	G224	G226
G228
1/4 Bend (90 Degree) Long Turn (G x G) 4" - 8"
G2510*	G2512*	G256	G257
G258
1/4 Bend (90 Degree) Long Turn (Sp x G) 4" - 8"
G2710*	G2712*	G274	G277
G278
1/8 Bend (45 Degree) (G x G) 4" – 12"
G5010	G5012	G504	G506
G508
1/8 Bend (45 Degree) (Spx G) 4" – 12"
G4010	G4012	G404	G406
G408
2-Way Cleanout (G x G x G) 4" – 6"
G1004	G1006
45 Degree Wye (G x G x G) 4" - 12"
G3010	G3010-4	G3010-6	G3010-8
G3012	G3012-10	G3012-4	G3012-6
G3012-8	G304	G306	G306-4
G308	G308-4	G308-6
45 Degree Wye (Sp x G x G) 4" - 8"
G324	G326	G326-4	G328
G328-4	G328-6
45 Degree Wye with DWV Branch (G x G x DWV H)8"x4"
G338-4
Cap 4" – 12"
G16010	G16012	G1604	G1606
G1608
Combo Wye & 1/8 Bend (G x G x G) 4" - 8"
G1654*	G1656*	G1656-4*	G1658*
G1658-4*	G1658-6*
Concentric Increaser Bushing (Sp x G) 4" – 12"
G1210-4	G1210-6	G1210-8	G1212-10
G1212-4	G1212-6	G1212-8	G1216
G1219	G1220
Concentric Increaser Coupling (G x G) 4" – 12"
G6010-4	G6010-6	G6010-8	G6012-10
G6012-4	G6012-6	G6012-8	G606-4
G608-4	G608-6
DWV Adapter Sleeve (DWV Sp x G) 4" – 6"
G1208	G1209
Double Wye (G x G x G x G) 4" – 6"
G366-4	G366-6
Eccentric Increaser Bushing (Sp x G) 4" - 8"
G1306-4	G1308-4	G1308-6
Eccentric Increaser Coupling (G x G) 4" - 8"
G616-4	G618-4	G618-6
Gasketed Sewer Adapter (H x G) 4" - 8"
G644	G646	G646-4	G648
Gasketed Sewer Adapter (Sp x G) 4" - 8"
G904	G906	G908
Repair Coupling 4" – 12"
G6210	G6212	G624	G626
G628
Sanitary Tee (T-Y) (G x G x G) 4" - 8"
G156	G157	G157-4	G158
G158-4	G158-6
Sanitary Tee (T-Y) (Sp x G x G) 4" - 8"
G174	G177	G177-4	G178
G178-4	G178-6
Solvent DWV Adapter Bushing (Sp x DWV G) 4" - 8"
G944	G946	G946-4	G948
Solvent Weld Sewer Adapter (Sp x H)
G964
Spigot Plug 4" – 12"
G11610	G11612	G1164	G1166
G1168
Stop Coupling 4" – 12"
G6010	G6012	G604	G606
G608
Straight Tee (G x G x G)
G1010	G1010-4	G1010-6	G1010-8
G1012	G1012-10	G1012-4	G1012-6
G1012-8	G104	G106	G106-4
G108	G108-4	G108-6
Straight Tee (Sp x G x G) 4" - 8"
G124	G126	G126-4	G128
G128-4	G128-6
Straight Tee With DWV Branch (G x G x DWV G)8"x 4"
G138-4
Vertical Riser Adapter (Sp x Sp) 4" - 8"
G984	G986	G988
* Fitting is an assembly of molded, NSF Listed fittings. $ STI Gasketed Sewer Fittings SDR 35. [1] Trade Names can be represented by PTI, PTI-Logo, Plastic Trend, Inc, Royal Pipe Systems or NAPCO.
Gasketed Sewer Fittings# [1]	PVC		ASTM D3034
1/16 Bend (22-1/2) (G x G) 4" – 12"
H17010	H17012	H1704	H1706
H1708
1/16 Bend (22-1/2) G x Sp) 4" – 12"
H17110	H17112	H1714	H1716
H1718
1/4 Bend (90) (G x G) 4" – 12"
H2010	H2012	H204	H206
H208
1/4 Bend (90) (G x Sp) 4" – 12"
H2210	H2212	H224	H226
H228
1/4 Bend (90) Long Turn (G x G) 4" - 8"
H2510*	H2512*	H256	H257
H258
1/4 Bend (90) Long Turn (G x Sp) 4" - 8"
H2710*	H2712*	H274	H277
H278
1/8 Bend (45) (G x G) 4" – 12"
H5010	H5012	H504	H506
H508
1/8 Bend (45) (G x Sp) 4" – 12"
H4010	H4012	H404	H406
H408
2-Way Cleanout (G x G x G) 4" – 6"
H1004	H1006
45 Degree Wye (G x G x G) 10" - 12"
H3010-4*	H3010-6*	H3012-4*	H3012-6*
45 Degree Wye (G x G x G) 4"-8"
H304	H306	H306-4	H308
H308-4	H308-6
45 Degree Wye with DWV Branch (G x G x DWV G)4"-8"
H318-4	H318-6
45 Degree Wye with DWV Branch (G x G x DWV H)4"-8"
H338-4	H338-6
Cap 4" - 8"
H1604	H1606	H1608
Combo Wye & 1/8 Bend (G x G x G) 4" - 8"
H1654*	H1656*	H1656-4*	H1658-4*
H1658-6*
Concentric Increaser Bushing (Spx G) 4" - 8"
H1216	H1219	H1220
Concentric Increaser Coupling (G x G) 4" - 8"
H606-4	H608-4	H608-6
DWV Adapter Sleeve (DWV Sp x G) 4" – 6"
H1208	H1209
Deep Socket 1/16 Bend (22-1/2) (G x G) 6"
H17066
Deep Socket 1/16 Bend (22-1/2) (G x Sp) 6"
H17166
Deep Socket 1/8 Bend (45) (G x G) 6"
H5066
Deep Socket 1/8 Bend (45) (G x Sp) 6"
H4066
Double Wye (G x G x G x G) 4" – 6"
H366-4	H366-6
Eccentric Increaser Bushing (Sp x G) 6" x 4"
H1306-4
Eccentric Increaser Coupling (G x G) 6" x 4"
H616-4
Gasketed DWV Adapter Bushing (Sp x DWV G) 4" – 6"
H1213	H1214	H1215
Gasketed DWV Adapter Coupling (G x DWV G) 4" - 8"
H657	H658	H659
Gasketed Sewer Adapter (H x DWV G) 4" – 6"
H954	H956	H956-4
Gasketed Sewer Adapter (H x G) 4" - 8"
H644	H646	H646-4	H648
Gasketed Sewer Adapter (Sp x G) 4" – 6"
H904	H906
Repair Coupling (G x G) 4" - 8"
H624	H626	H628
Sanitary Tee (G x G x G) 4" - 8"
H156	H157	H157-4	H158
H158-4	H158-6
Sanitary Tee (G x G x Sp) 4" - 8"
H174*	H177*	H177-4*	H178*
H178-4	H178-6
Sanitary Tee With DWV Branch (G x G x DWV G) 4"-8"
H188-4*	H188-6*
Sanitary Tee With DWV Branch(G x G x S/W DWV)4"-8"
H198-4	H198-6
Spigot Plug 4" - 8"
H1164	H1166	H1168
Stop Coupling (G x G) 4" - 8"
H604	H606	H608
Straight Tee (G x G x G) 4" – 12"
H1010	H1010-4	H1010-6	H1010-8
H1012	H1012-10	H1012-4	H1012-6
H1012-8	H104	H106	H106-4
H108	H108-4	H108-6
Straight Tee (G x G x Sp) 4"
H124*	H126	H126-4	H128
H128-4	H128-6
Straight Tee with DWV Branch (G x G x DWV G) 4"-8"
H118-4	H118-6
Straight Tee with DWV Branch (G x G x DWV H) 4"-8"
H1310-4*	H1310-6*	H1312-4*	H1312-6*
H138-4	H138-6
Vertical Riser Adapter (Sp x Sp) 4" – 6"
H984	H986	H988
* Fitting is an assembly of molded, NSF Listed fittings. # Heavy Wall Gasketed Sewer Fittings SDR 26. [1] Trade Names can be represented by PTI, PTI-Logo, Plastic Trend, Inc, Royal Pipe Systems or NAPCO.
Gasketed Sewer Fittings$ [1]	PVC		ASTM D3034
1/16 Bend (22-1/2 Degree) (G x G) 4" – 12"
G17010	G17012	G1704	G1706
G1708
1/16 Bend (22-1/2 Degree) (Sp x G) 4" – 12"
G17110	G17112	G1714	G1716
G1718
1/4 Bend (90 Degree) (G x G) 4" – 12"
G2010	G2012	G204	G206
G208
1/4 Bend (90 Degree) (Sp x G) 4" – 12"
G2210	G2212	G224	G226
G228
1/4 Bend (90 Degree) Long Turn (G x G) 4" - 8"
G2510*	G2512*	G256	G257
G258
1/4 Bend (90 Degree) Long Turn (Sp x G) 4" - 8"
G2710*	G2712*	G274	G277
G278
1/8 Bend (45 Degree) (G x G) 4" – 12"
G5010	G5012	G504	G506
G508
1/8 Bend (45 Degree) (Spx G) 4" – 12"
G4010	G4012	G404	G406
G408
2-Way Cleanout (G x G x G) 4" – 6"
G1004	G1006
45 Degree Wye (G x G x G) 4" - 12"
G3010	G3010-4	G3010-6	G3010-8
G3012	G3012-10	G3012-4	G3012-6
G304	G306	G306-4	G308
G308-4	G308-6
45 Degree Wye (Sp x G x G) 4" - 8"
G324	G326	G326-4	G328
G328-4	G328-6
45 Degree Wye with DWV Branch (G x G x DWV H)8"x4"
G338-4
Cap 4" – 12"
G16010	G16012	G1604	G1606
G1608
Combo Wye & 1/8 Bend (G x G x G) 4" - 8"
G1654*	G1656*	G1656-4*	G1658*
G1658-4*	G1658-6*
Concentric Increaser Bushing (Sp x G) 4" – 12"
G1210-4	G1210-6	G1210-8	G1212-10
G1212-4	G1212-6	G1212-8	G1216
G1219	G1220
Concentric Increaser Coupling (G x G) 4" – 12"
G6010-4	G6010-6	G6010-8	G6012-10
G6012-4	G6012-6	G6012-8	G606-4
G608-4	G608-6
DWV Adapter Sleeve (DWV Sp x G) 4" – 6"
G1208	G1209
Double Wye (G x G x G x G) 4" – 6"
G366-4	G366-6
Eccentric Increaser Bushing (Sp x G) 4" - 8"
G1306-4	G1308-4	G1308-6
Eccentric Increaser Coupling (G x G) 4" - 8"
G616-4	G618-4	G618-6
Gasketed Sewer Adapter (H x G) 4" - 8"
G644	G646	G646-4	G648
Gasketed Sewer Adapter (Sp x G) 4" - 8"
G904	G906	G908
Repair Coupling 4" – 12"
G6210	G6212	G624	G626
G628
Sanitary Tee (T-Y) (G x G x G) 4" - 8"
G156	G157	G157-4	G158
G158-4	G158-6
Sanitary Tee (T-Y) (Sp x G x G) 4" - 8"
G174	G177	G177-4	G178
G178-4	G178-6
Solvent DWV Adapter Bushing (Sp x DWV G) 4" - 8"
G944	G946	G946-4	G948
Solvent Weld Sewer Adapter (Sp x H)
G964
Spigot Plug 4" – 12"
G11610	G11612	G1164	G1166
G1168
Stop Coupling 4" – 12"
G6010	G6012	G604	G606
G608
Straight Tee (G x G x G)
G1010	G1010-4	G1010-6	G1010-8
G1012	G1012-10	G1012-4	G1012-6
G1012-8	G104	G106	G106-4
G108	G108-4	G108-6
Straight Tee (Sp x G x G) 4" - 8"
G124	G126	G126-4	G128
G128-4	G128-6
Straight Tee With DWV Branch(G x G x DWV G)8" x 4"
G138-4
Vertical Riser Adapter (Sp x Sp) 4" - 8"
G984	G986	G988
* Fitting is an assembly of molded, NSF Listed fittings. $ STI Gasketed Sewer Fittings SDR 35. [1] Trade Names can be represented by PTI, PTI-Logo, Plastic Trend, Inc, Royal Pipe Systems or NAPCO.
Gasketed Sewer Fittings# [1] [3]	PVC		ASTM D3212
1/16 Bend (22-1/2) (G x G) 4" – 12"
H17010	H17012	H1704	H1706
H1708
1/16 Bend (22-1/2) G x Sp) 4" – 12"
H17110	H17112	H1714	H1716
H1718
1/4 Bend (90) (G x G) 4" – 12"
H2010	H2012	H204	H206
H208
1/4 Bend (90) (G x Sp) 4" – 12"
H2210	H2212	H224	H226
H228
1/4 Bend (90) Long Turn (G x G) 4" - 8"
H2510	H2512	H256	H257
H258
1/4 Bend (90) Long Turn (G x Sp) 4" - 8"
H2710*	H2712*	H274	H277
H278
1/8 Bend (45) (G x G) 4" – 12"
H5010	H5012	H504	H506
H508
1/8 Bend (45) (G x Sp) 4" – 12"
H4010	H4012	H404	H406
H408
2-Way Cleanout (G x G x G) 4" – 6"
H1004	H1006
45 Degree Wye (G x G x G) 4"- 8"
H304	H306	H306-4	H308
H308-4	H308-6
45 Degree Wye With DWV Branch (G x G x DWV G)4"-8"
H318-4	H318-6
45 Degree Wye With DWV Branch (G x G x DWV H)4"-8"
H338-4	H338-6
Cap 4" - 8"
H1604	H1606	H1608
Combo Wye & 1/8 Bend (G x G x G) 4" - 8"
H1654*	H1656*	H1656-4*	H1658-4*
H1658-6*
Concentric Increaser Bushing (Sp x G) 4" - 8"
H1216	H1219	H1220
Concentric Increaser Coupling (G x G) 4" - 8"
H606-4	H608-4	H608-6
DWV Adapter Sleeve (DWV Sp x G) 4" – 6"
H1208	H1209
Deep Socket 1/16 Bend (22-1/2) (G x G) 6"
H17066
Deep Socket 1/16 Bend (22-1/2) (G x Sp) 6"
H17166
Deep Socket 1/8 Bend (45) (G x G) 6"
H5066
Deep Socket 1/8 Bend (45) (G x Sp) 6"
H4066
Double Wye (G x G x G x G) 4" – 6"
H366-4	H366-6
Eccentric Increaser Bushing (Sp x G) 6" x 4"
H1306-4
Eccentric Increaser Coupling (G x G) 6" x 4"
H616-4
Gasketed DWV Adapter Bushing (Sp x DWV G) 4" – 6"
H1213	H1214	H1215
Gasketed DWV Adapter Coupling (G x DWV G) 4" - 8"
H657	H658	H659
Gasketed Sewer Adapter (H x DWV G) 4" – 6"
H954	H956	H956-4
Gasketed Sewer Adapter (H x G) 4" - 8"
H644	H646	H646-4	H648
Gasketed Sewer Adapter (Sp x G) 4" – 6"
H904	H906
Repair Coupling (G x G) 4" - 8"
H624	H626	H628
Sanitary Tee (G x G x G) 4" - 8"
H156	H157	H157-4	H158
H158-4	H158-6
Sanitary Tee (G x G x Sp) 4" - 8"
H174	H177	H177-4	H178
H178-4	H178-6
Sanitary Tee With DWV Branch (G x G x DWV G) 4"-8"
H188-4*	H188-6*
Sanitary Tee With DWV Branch(G x G x S/W DWV)4"-8"
H198-4	H198-6
Stop Coupling (G x G) 4" - 8"
H604	H606	H608
Straight Tee (G x G x G) 4" – 12"
H1010	H1010-4	H1010-6	H1010-8
H1012	H1012-10	H1012-4	H1012-6
H1012-8	H104	H106	H106-4
H108	H108-4	H108-6
Straight Tee (G x G x Sp) 4"
H124*	H126	H126-4	H128
H128-4	H128-6
Straight Tee With DWV Branch (G x G x DWV G) 4"-8"
H118-4	H118-6
Straight Tee With DWV Branch (G x G x DWV H) 4"-8"
H138-4	H138-6
* Fitting is an assembly of molded, NSF Listed fittings. # Heavy Wall Gasketed Sewer Fittings SDR 26. [1] Trade Names can be represented by PTI, PTI-Logo, Plastic Trend, Inc, Royal Pipe Systems or NAPCO. [3] Product is Certified for the joint design only.
Sewer Fittings% [1]	PVC		ASTM D3034
1/16 Bend (22-1/2 Degree) (H x H) 4" – 12"
S324040	S324060	S324080	S324100
S324120
1/16 Bend (22-1/2 Degree) (Sp x H) 4" – 12"
S326040	S326060	S326080	S326100
S326120
1/4 Bend (90 Degree) (H x H) 4" – 12"
S300040	S300060	S300080	S300100
S300120
1/4 Bend (90 Degree) (Sp x H) 4" – 12"
S302060	S302080	S302100	S302120
1/4 Bend (90 Degree) Long Turn (H x H) 4" - 8"
S304040	S304060	S304080
1/4 Bend (90 Degree) Long Turn (Sp x H) 4" - 8"
S309040	S309060	S309080
1/8 Bend (45 Degree) (H x H) 4" – 12"
S321040	S321060	S321080	S321100
S321120
1/8 Bend (45 Degree) (Sp x H) 4" – 12"
S323040	S323060	S323080	S323100
S323120
2-Way Cleanout (H x H x H) 4" – 6"
S448040	S448060
45 Degree Wye (H x H x H) 4" - 8"
P316	S600040	S600060	S600080
S601582	S601585
Cap 4" – 12"
S447040	S447060	S447080	S447100
S447120
Cast Iron Pipe Adapter (C.I. H x H) 4"
S450040
Clay Pipe Adapter (Clay H x H) 4"
S451040
Clay Pipe Adapter (Clay Sp x H) 4"
P854
Cleanout Tee (H x H X FIPT) 4" – 6"
S445040	S445060
Concentric Reducer Bushing (Sp x H) 4" – 12"
P1217	P1218	S121420	S121422
S121532	S121624	S121626	S121628
S121664	S121666	S121668	S121670
Concentric Reducer Coupling (H x H) 4" – 12"
S102420	S102422	S102532	S102582
S102585	S102624	S102626	S102628
S102664	S102666	S102668	S650422
Corrugated Adapter (Corrugated Sp x H) 4"
S374040
Countersunk Plug 4" – 12"
S110040	S110060	S110080	S110100
S110120
Coupling (H x H) 4" – 12"
S100040	S100060	S100080	S100100
S100120
DWV Adapter Bushing (Sp x DWV H) 4" – 6"
S649040	S649060	S649149	S649420
S649422	S649532
DWV Adapter Coupling (H x DWV H) 4" – 6"
S650040	S650060	S650532
DWV Adapter Sleeve (DWV Sp x H) 4" – 6"
S651040	S651060
Double 45 Degree Wye (H x H x H x H) 4" – 6"
S611060	S612532
Downspout Adapter (Dnsp x Dnsp x H) 4"
S190259	S190348
Female Adapter (H x FIPT) 4" – 12"
S101040	S101060	S101080	S101100
S101120
Fitting Cleanout (Sp x FIPT) 4" – 12"
S105040	S105060	S105080	S105100
S105120
Flushmount Downspout Adapter(Dnsp x Dnsp x H)4"–6"
S192259	S192348	S192532
Male Adapter (H x MIPT) 4" – 6"
S109040	S109060
Saddle HUB Tee (Skirt Dia. x H) 4" - 12"
H2106-4R	H2108-4R	H2108-6R	H2110-4R
H2110-6R	H2112-4R	H2112-6R
Saddle HUB Tee W/GSK (Skirt Dia. x H) 4" - 12"
H2106-4RG	H2108-4RG	H2108-6RG	H2110-4RG
H2110-6RG	H2112-4RG	H2112-6RG
Saddle HUB Tee W/LOC RIB (Skirt Dia. x H) 4" - 12"
H4106-4R	H4108-4R	H4108-6R	H4110-4R
H4110-6R	H4112-4R	H4112-6R
Saddle HUB Tee W/LOC RIB W/GSK(Skirt Dia.xH)4"-12"
H4106-4RG	H4108-4RG	H4108-6RG	H4110-4RG
H4110-6RG	H4112-4RG	H4112-6RG
Saddle HUB Wye (Skirt Dia. x H) 4" - 12"
H2306-4R	H2308-4R	H2308-6R	H2310-4R
H2310-6R	H2312-4R	H2312-6R
Saddle HUB Wye W/GSK (Skirt Dia. x H) 4" - 12"
H2306-4RG	H2308-4RG	H2308-6RG	H2310-4RG
H2310-6RG	H2312-4RG	H2312-6RG
Saddle HUB Wye W/LOC RIB (Skirt Dia. x H) 4" - 12"
H4306-4R	H4308-4R	H4308-6R	H4310-4R
H4310-6R	H4312-4R	H4312-6R
Saddle HUB Wye W/LOC RIB W/GSK(Skirt Dia.xH)4"-12"
H4306-4RG	H4308-4RG	H4308-6RG	H4310-4RG
H4310-6RG	H4312-4RG	H4312-6RG
Saddle Tee (Skirt Dia. x H) 4" - 8"
S212532	S212582	S212585
Saddle Tee With Locating Ring(Skirt Dia. x H)4"-8"
S211532	S211582	S211585
Saddle Wye (Skirt Dia. x H) 4" - 8"
S213532	S213582	S213585
Saddle Wye With Locating Ring(Skirt Dia. x H)4"-8"
S214532	S214582	S214585
Sanitary Tee (H x H x H) 4" - 8"
S400040	S400060	S400080	S401532
S401582	S401585
Straight Tee (H x H x H) 4" – 12"
S441040	S441060	S441080	S441100
S441120	S442532	S442582	S442585
S442624	S442626	S442628	S442664
S442666	S442668	S442670
Tee Cross (H x H x H x H) 4"
S279040
Threaded Plug 4" - 12"
S106040	S106060	S106080	S106100
S106120
% Solvent Weld Sewer Fittings SDR 35. [1] Trade Names can be represented by PTI, PTI-Logo, Plastic Trend, Inc, Royal Pipe Systems or NAPCO.

[2] Gasketed fittings Certified to ASTM D3139 have a pressure rating of 160 psi.  The
    end-use for these fittings is for gravity sewer applications only.

Facility : Booneville, MS

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [1] [2] [G]	PVC	Westlake Pipe & Fittings	ASTM D1785
1/2" - 12" Sch 40
1/2" - 12" Sch 80
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product may also be marked with trade designation Westlake Canada, Inc. DBA Westlake Pipe & Fittings or AquaSpring®. [2] Sockets and gasketed ball ends are not tested or Listed by NSF for this production facility. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [1] [2] [G]	PVC	Westlake Pipe & Fittings	ASTM D2241
1 /2" - 6" SDR 13.5
>= 3/4" SDR 17
>= 3/4" SDR 21
>= 1" SDR 26
>= 1" SDR 32.5
>= 3" SDR 41
4" - 12" SDR 64
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product may also be marked with trade designation Westlake Canada, Inc. DBA Westlake Pipe & Fittings or AquaSpring®. [2] Sockets and gasketed ball ends are not tested or Listed by NSF for this production facility. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product,product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Leola, PA

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe[1] [2]	PVC	Westlake Pipe & Fittings	ASTM D2665
1 1/4" - 12" Sch 40
[1] Product may also be marked with trade designation Westlake Canada, Inc. DBA Westlake Pipe & Fittings. [2] Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility.
Pipe¢ [1]	PVC	Westlake Pipe & Fittings	ASTM F3128
1 1/4" - 6"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product may also be marked with trade designation Westlake Canada, Inc. DBA Westlake Pipe & Fittings.
Pipe¢ [1]	PVC	NAPCOREtm	ASTM F3128
1 1/4" - 6"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product may also be marked with trade designation Westlake Canada, Inc. DBA Westlake Pipe & Fittings.
Pipe[1]	PVC	Westlake Pipe & Fittings	ASTM F891
1 1/4" - 6" Sch 40
[1] Product may also be marked with trade designation Westlake Canada, Inc. DBA Westlake Pipe & Fittings.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Electrical Conduit and Accessories

Product Type	Material Type	Trade Name	Product Standard
Pipe*	PVC	Westlake Pipe and Fittings Corporation	UL 651
1/2", 3/4", 1", 1 1/2", 2", 3", 4", 6" Sch 40
* Complies with requirements for above ground, underground or in-door use; sunlight resistance and use with maximum 90°C wire.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [1] [2] [G]	PVC	Westlake Pipe & Fittings	ASTM D1785
1/2" - 12" Sch 40
1/2" - 12" Sch 80
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product may also be marked with trade designation Westlake Canada, Inc. DBA Westlake Pipe & Fittings. [2] Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [1] [2] [G]	PVC	Westlake Pipe & Fittings	ASTM D2241
1/2" - 6" SDR 13.5
>= 3/4" SDR 17
>= 3/4" SDR 21
>= 1" SDR 26
>= 1" SDR 32.5
>= 3" SDR 41
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product may also be marked with trade designation Westlake Canada, Inc. DBA Westlake Pipe & Fittings. [2] Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Brownsville, TN

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings§ [1] [2]	PVC	LASCO	ASTM D2665
1/16 Bend (HUB x HUB)
1 1/2" - 8" (D324-xxx)
1/16 Bend, Street (SPIGOT x HUB)
1 1/2" - 8" (D326-xxx)
1/32 Bend
10" - 12" (D328-XXX)
1/4 Bend (HUB x HUB)
1 1/4" - 8" (D300-xxx)
1/4 Bend w/ Low Heel Inlet (HUB x HUB x HUB)
3" x 3" x 1 1/2" (D303-338)	3" x 3" x 2" (D303-337)	4" x 4" x 2" (D303-420)
1/4 Bend w/ Side Inlet (HUB x HUB x HUB)
3" x 3" x 1 1/2" (D301-xxx)	3" x 3" x 2" (D301-xxx)
1/4 Bend, Street (HUB x SPIGOT)
1 1/2" - 12" (D302-xxx)
1/4 Bend, Street Low Heel Inlet(SPIG x HUB x SPIG)
2" - 3" (D293-xxx)
1/4 Bend, Vent Ell (HUB)
1 1/2" - 12" (D331-xxx)
1/4 Bend, Vent Ell (Street)
1 1/2" - 12" (D333-xxx)
1/6 Bend (HUB x HUB)
1 1/2" - 4" (D319-xxx)
1/8 Bend (HUB x HUB)
1 1/2" - 12" (D321-xxx)
1/8 Bend, Street (HUB x SPIGOT)
1 1/2" - 12" (D323-xxx)
Adapter Bushing (Spigot x HUB)
3" - 4" (D118-xxx)
Adapter Coupling
4" (D117-xxx)	4" x 3" (D117-xxx)
Bushing (SP x S)
1 1/2" x 1 1/4" (D107-212)	10" x 3" (D107-623)	10" x 4" (D107-624)	10" x 6" (D107-626)
10" x 8" (D107-628)	12" x 10" (D107-670)	12" x 3" (D107-661)	12" x 4" (D107-664)
12" x 6" (D107-666)	12" x 8" (D107-668)	2" x 1 1/2" (D107-251)	2" x 1 1/4" (D107-250)
3" x 1 1/2" (D107-337)	3" x 2" (D107-338)	4" x 2" (D107-420)	4" x 3" (D107-422)
6" x 4" (D107-532)	8" x 4" (D107-582)	8" x 6" (D107-585)
Cap (SLIP)
1 1/2" - 12" (D116-xxx)
Clean Out Plug Flush MPT
2" - 4" (D110-XXX)
Clean out Tee Reducing, with Plug (HxHxFIPT)
10" x 8" (D443-628)	12" x 8" (D443-668)
Cleanout Adapter (SPIGOT x FPT)
1 1/4" - 6" (D105-xxx)
Cleanout Adapter w/ Cleanout Plug (SPIGOT)
1 1/2" - 6" (D112-xxx)
Cleanout Plug w/ Raised Nut (MPT)
1 1/4" - 12" (D106-xxx)
Cleanout Tee w/ Cleanout Plug (HUB x HUB x FPT)
1 1/2" - 12" (D443-xxx)
Closet Bend, Reducing (HUB x HUB)
4" x 3" (D329-422)
Closet Bend, Reducing (HUB x SPIGOT)
3" - 4" (D330-XXX)	3" x 4" (D330-341)
Closet Flange (HUB)
4" (D800-040)	4" x 3" (D800-422)
Closet Flange (SPIGOT)
4" (D801-040)	4" x 3" (D801-422)
Closet Flange w/ Knockout Hub
4" x 3" (D810-422)
Closet Flange, Adjustable w/ Metal Ring (HUB)
4" (D811-040)	4" x 3" (D811-422)
Closet Flange, Adjustable w/ Metal Ring (SPIGOT)
4" (D812-040)	4" x 3" (D812-422)
Combination Wye & 1/8 Bend
1 1/2" - 12" (D503-xxx)	10" x 4" (D504-624)	10" x 6" (D504-626)	10" x 8" (D504-628)
12" x 10" (D504-670)	12" x 6" (D504-664)	12" x 8" (D504-668)	3" x 2" (D504-338)
4" x 3" (D504-422)	6" x 4" (D504-432)	8" x 4" (D504-582)	8" x 6" (D504-585)
Combination Wye &1/8th Bend Long Turn All Hub Red.
2" x 1 1/2" x 1 1/2" (D502-241)	2" x 2" x 1 1/2" (D502-251)	3" x 3" x 1 1/2" (D502-337)	3" x 3" x 2" (D502-338)
4" x 4" x 2" (D502-420)	4" x 4" x 3" (D502-422)
Combination Wye and 1/8th Bend Long Turn All Hub
1 1/2" - 4" (D501-XXX)
Cottage Wye LH Inlet
3" - 4" (D625-XXX)
Cottage Wye RH Inlet
3" - 4" (D626-XXX)
Coupling (HUB x HUB)
1 1/4" - 12" (D100-xxx)
Double 1/4 Bend (HUB x HUB x HUB)
1 1/2" - 4" (D327-xxx)
Double Combination Wye+1/8th Bend 3 Pieces All Hub
3" (D507-030)	4" (D507-040)	4" x 2" (D507-420)	4" x 3" (D507-422)
Double Cottage Wye w/ 2" Inlet
3" - 4" (D610-XXX)
Double Fixture Fitting (ALL HUB)
2" (D510-020)	2" x 1 1/2" x 1 1/2" x 1 1/2" (D510-241)	3" (D510-030)	3" x 2" x 3" x 3" (D510-329)
Double Sanitary Tee (ALL HUB)
2" x 1 1/2" (D429-252)	3" x 1 1/2" (D429-337)	3" x 2" (D429-338)	4" x 2" (D429-420)
4" x 3" (D429-422)
Double Sanitary Tee Hub
1 1/2" - 4" (D428-XXX)
Double Sanitary Tee w/ R & L Side Inlet (ALL HUB)
3" x 1 1/2" (D439-337)	3" x 2" (D439-338)	4" x 2" (D439-420)
Double Sanitary Tee w/ Side Inlet
3" x 1 1/2" (D438-337)	3" x 2" (D438-338)	4" x 2" (D438-420)
Double Sanitary Tee, Reducing (ALL HUB)
(D429-030)
Double Sanitary Tee, Street (SPIG x HUB)
2 x 1 1/2" (D431-251)	3" (D431-030)	3" x 3" x 2" x 2" (D431-338)
Double Wye (ALL HUB)
1 1/2" - 6" (D611-xxx)
Double Wye, Reducing (ALL HUB)
2" x 1 1/2" (D612-252)	3" x 1 1/2" (D612-337)	3" x 2" (D612-338)	4" x 2" (D612-420)
4" x 3" (D612-422)	6" x 4" (D612-532)
Drum Trap
3" x 6" x 1 1/2" (D720-015)
Female Adapter (HUB x FIPT)
1 1/4" - 8" (D101-xxx)
Flush Bushing (HUB x SPIGOT)
1 1/4" - 12" (D107-xxx)
Flush Bushing FIPTXSPT
2" x 1 1/2" (D108-251)
Flush Cleanout Tee (HUB x HUB x FPT)
1 1/2" - 12" (D445-XXX)	10" x 12" (D445-668)	10" x 8" (D445-628)	2" - 4" (D445-xxxX)
Flush Closet Flange Knockout Hub
4" x 3" (D815-XXX)
Hub Adapter, Cast Iron Soil Pipe (HUB x HUB)
2" - 4" (D122-xxx)
Hub Adapter, Cast Iron Soil Pipe (HUB x SPIG)
1 1/2" - 6" (D123-xxx)	2" x 1 1/2" (D123-251)	3" x 4" (D123-341)
Long Sweep 1/4 Bend (HUB x HUB)
1 1/2" - 6" (D304-xxx)
Long Sweep 1/4 Bend w/ Heel Inlet (ALL HUB)
2" - 3" (D307-XXX)	3" x 3" x 2" (D307-338)
Long Sweep 1/4 Bend, Street (HUB x SPIGOT)
1 1/2" - 6" (D309-xxx)
Male Adapter (HUB x MPT)
1 1/2" x 1 1/4" (D109-212)	1 1/4" - 4" (D109-xxx)
Offset Closet Flange (HUB)
4" x 3" (D822-422)
Offset Closet Flange, w/ Metal Ring (HUB)
4" x 3" (D823-422)
One 6th Bend Street HX SPT
1 1/2" - 4" (D320-XXX)
P-Trap (HUB x HUB)
1 1/2" (D706-016)	1 1/2" - 4" (D706-xxx)	2" (D706-021)
P-Trap, Union
1 1/2" (D711-XXX)	1 1/2" - 2" (D708-XXX)	1 1/2" x 1 1/4" (D711-XXX)
Pipe Increaser/Reducer HXH
10" x 6" (D102-626)	10" x 8" (D102-628)	12" x 10" (D102-670)	12" x 8" (D102-668)
2" x 1 1/2" (D102-251)	3" x 1 1/2" (D102-337)	3" x 2" (D102-338)	4" x 2" (D102-420)
4" x 3" (D102-422)	6" x 4" (D102-532)	8" x 4" (D102-582)	8" x 6" (D102-585)
Reducer
2"x 1 1/2" (D327-241)
Reducing Coupling (HUB x HUB)
10" x 6" (D102-626)	10" x 8" (D102-628)	12" x 10" (D102-670)	12" x 8" (D102-668)
3" x 1 1/2" (D102-337)	3" x 2" (D102-338)	4" x 2" (D102-420)	4" x 3" (D102-422)
6" x 4" (D102-532)	8" x 4" (D102-582)	8" x 6" (D102-585)
Reducing Upright Combination Wye 1/8th Bend HXH
2" x 2" x 1 1/2" (D606-251)	3" x 2" (D606-338)
Return Bend (HUB x HUB)
1 1/2" - 4" (D700-xxx)
Sanitary Tee (ALL HUB)
1 1/2" - 8" (D400-xxx)
Sanitary Tee w/ Left Side Inlet
3" x 1 1/2" (D416-337)	3" x 2" (D416-338)	4" x 2" (D416-420)
Sanitary Tee w/ R & L Side Inlet
3" x 1 1/2" (D418-337)	3" x 2" (D418-338)	4" x 2" (D418-420)
Sanitary Tee w/ Right Side Inlet
3" x 1 1/2" (D417-337)	3" x 2" (D417-338)	4" x 2" (D417-420)
Sanitary Tee, Reducing (ALL HUB)
2" x 1 1/2" x 1 1/2" (D401-241)	2" x 1 1/2" x 2" (D401-242)	2" x 2" x 1 1/2" (D401-251)	3" x 3" x 1 1/2" (D401-337)
3" x 3" x 1 1/2" (D401-338)	4" x 4" x 2" (D401-420)	4" x 4" x 3" (D401-422)	6" x 6" x 4" (D401-532)
Sanitary Tee, Street (HUB x HUB x SPIG)
1 1/2" - 4" (D403-xxx)
Sanitary Tee, Street Reducing (HUB x HUB x SPIG)
2" x 1 1/2" x 1 1/2" (D404-241)	2" x 1 1/2" x 2" (D404-242)	2" x 2" x 1/2" (D404-251)	3" x 3" x 1 1/2" (D404-337)
3" x 3" x 2" (D404-338)	4" x 4" x 2" (D404-420)
Street Wye SPTX HXH
1 1/2" - 4" (D602-XXX)
Trap Adapter, Female (HUB x FPT)
1 1/2" (D114-015)	1 1/2" x 1 1/4" (D114-212)	2" (D114-020)
Trap Adapter, Female (HxSJ w/ Chrome Nut & Washer)
1 1/2" (D116-015)	1 1/2" x 1 1/4" (D116-212)	2" (D116-020)
Trap Adapter, Female(HxSJ w/ Plastic Nut & Washer)
1 1/2" (D104-015)	1 1/2"x 1 1/4" (D104-212)	1 1/4" (D104-012)	2" (D104-120)
Trap Adapter, Male (SP x MPT)
1 1/2" (D103-015)	1 1/2" x 1 1/4" (D103-212)	2" (D103-020)
Trap Adapter, Male (SPxSJ w/ Plastic Nut & Washer)
1 1/2" x 1 1/4" (D113-212)	1 1/4" - 2" (D113-xxx)
Trap Adapter, Male(SP x SJ w/ Chrome Nut & Washer)
1 1/2" x 1 1/4" (D115-212)	1 1/4" - 2" (D115-xxx)
Two-Way Cleanout (ALL HUB)
3" - 4" (D448-xxx)
Upright Combination Wye & 1/8 Bend
10" x 10" x 4" (D605-624)	10" x 10" x 6" (D605-XXX)	10" x 10" x 8" (D605-xxx)	12" x 12" x 10" (D605-XXX)
12" x 12" x 4" (D605-XXX)	12" x 12" x 6" (D605-XXX)	12" x 12" x 8" (D605-XXX)	2" - 12" (D605-xxx)
Vent Ell (H x H)
1 1/2" - 12" (D331-xxx)
Vent Ell, Street (H x SP)
1 1/2" - 4" (D333-xxx)
Vent Tee (ALL HUB)
1 1/2" - 12" (D441-xxx)	10" x 10" x 4" (D441-624)	10" x 10" x 6" (D441-626)	10" x 10" x 8" (D441-628)
12" x 12" x 10" (D441-670)	12" x 12" x 4" (D441-664)	12" x 12" x 6" (D441-666)	12" x 12" x 8" (D441-668)
Wye (ALL HUB)
1 1/2" - 12" (D600-xxx)
Wye Reducing Street SPTXHXH
3" x 3" x 1 1/2" (D603-337)	3" x 3" x 2" (D603-338)	4" x 4" x 2" (D603-420)	4" x 4" x 3" (D603-422
Wye, Reducing (ALL HUB)
10" x 10" x 3" (D601-624)	10" x 10" x 4" (D601-626)	10" x 10" x 6" (D601-628)	12" x 12" x 10" (D601-670)
12" x 12" x 4" (D601-664)	12" x 12" x 6" (D601-666)	12" x 12" x 8" (D601-668)	2" x 1 1/2" x 1 1/2" (D601-241)
2" x 1 1/2" x 2" (D601-242)	2" x 2" x 1 1/2" (D601-251)	3" x 3" x 1 1/2" (D601-337)	3" x 3" x 2" (D601-338)
4" x 4" x 2" (D601-420)	4" x 4" x 3" (D601-422)	6" x 6" x 3" (D601-530)	6" x 6" x 4" (D601-532)
8" x 8" x 4" (D601-582)	8" x 8" x 6" (D601-585)
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] xxx - size 012 - 1 1/4" 015 - 1 1/2" 020 - 2" 030 - 3" 040 - 4" 060 - 6" 080 - 8" 100 - 10" 120 - 12" 212 - 1 1/2" x 1 1/4" 241 - 2" x 1 1/2" x 1 1/2" 242 - 2" x 1 1/2" x 2" 251 - 2" x 2" x 1 1/2" x 1 1/2" 252 - 2" x 2" x 1 1/2" x 1 1/2" 329 - 3" x 2" x 3" x 3" 337 - 3" x 3" x 1 1/2" x 1 1/2" 338 - 3" x 3" x 2" x 2" 420 - 4" x 4" x 2" x 2" 422 - 4" x 4" x 3" x 3" 530 - 6" x 6" x 3" 532 - 6" x 6" x 4" x 4" 582 - 8" x 4" 585 - 8" x 6" 623 - 10" x 3" 624 - 10" x 4" 626 - 10" x 6" 628 - 10" x 8" 661 - 12" x 3" 664 - 12" x 4" 666 - 12" x 6" 668 - 12" x 8" 670 - 12" x 10" [2] Product may also be marked with the trade designation Westlake Pipe & Fittings.
Fittings[1] [2]	PVC	LASCO	*SE 7992*
Cottage Wye LH Inlet
3" - 4" (D625-XXX)
Cottage Wye RH Inlet
3" - 4" (D626-XXX)
Double Cottage Wye w/ 2" Inlet
3" - 4" (D610-XXX)
Drum Trap
3" x 6" x 1 1/2" (D720-015)
No-Hub Adapter (HUB x SPIGOT)
1 1/2" - 4" (D119-xxx)
P-Trap with Cleanout
1 1/2" - 2" (D707-XXX)
[1] xxx - size 012 - 1 1/4" 015 - 1 1/2" 020 - 2" 030 - 3" 040 - 4" 060 - 6" 080 - 8" 100 - 10" 120 - 12" 212 - 1 1/2" x 1 1/4" 241 - 2" x 1 1/2" x 1 1/2" 242 - 2" x 1 1/2" x 2" 251 - 2" x 2" x 1 1/2" x 1 1/2" 252 - 2" x 2" x 1 1/2" x 1 1/2" 329 - 3" x 2" x 3" x 3" 337 - 3" x 3" x 1 1/2" x 1 1/2" 338 - 3" x 3" x 2" x 2" 420 - 4" x 4" x 2" x 2" 422 - 4" x 4" x 3" x 3" 530 - 6" x 6" x 3" 532 - 6" x 6" x 4" x 4" 582 - 8" x 4" 585 - 8" x 6" 623 - 10" x 3" 624 - 10" x 4" 626 - 10" x 6" 628 - 10" x 8" 661 - 12" x 3" 664 - 12" x 4" 666 - 12" x 6" 668 - 12" x 8" 670 - 12" x 10" [2] Product may also be marked with the trade designation Westlake Pipe & Fittings.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings+++ [1] [2] [G]	CPVC	LASCO CPVC Fittings	ASTM F439
45° Ell (S)
1/4" - 8" (9817-xxx)
45° Ell (T)
3/8" - 2" (9819-xxx)
90° Ell (S)
1/4" - 8" (9806-xxx)
90° Ell (SxT)
3/8" - 2" (9807-xxx)
90° Ell (T)
3/8" - 2" (9808-xxx)
Bushing (S)
1/4" - 8" (9837-XXX)
Bushing (SxT)
1/4" - 6" (9838-XXX)
Bushing (T)
1/2" - 4" (9839-XXX)
Cap (S)
1/2" - 6" (9847-xxx)
Cap (T)
3/8" - 2" (9830-XXX-SR)	3/8" - 4" (9848-xxx)
Coupling (S)
1/2" - 8" (9829-XXX)
Coupling (T)
3/8" - 2" (9830-xxx)
Female Adapter
1/4" - 4" (9835-xxx)	1/4" - 4" (9835-XXX-SR)
Male Adapter
1/2" - 4" (9836-xxx)
Plug (T)
1/4" - 4" (9850-xxx)
Tee (S)
1/2" - 8" (9801-xxx)
Tee (SST)
1/2" - 4" (9802-xxx)
Tee (T)
3/8" - 4" (9805-xxx)
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] xxx designates the following sizes: 002 - 1/4" 003 - 3/8" 005 - 1/2" 007 - 3/4" 010 - 1" 012 - 1 1/4" 015 - 1 1/2" 020 - 2" 025 - 2 1/2" 030 - 3" 040 - 4" 052 - 3/8" x 1/4" 060 - 6" 072 - 1/2" x 1/4" 073 - 1/2" x 3/8" 080 - 8" 101 - 3/4" x 1/2" 130 - 1" x 1/2" 131 - 1" x 3/4" 166 - 1 1/4" x 1/2" 167 - 1 1/4" x 3/4" 168 - 1 1/2" x 1" 209 - 1 1/2" x 1/2" 210 - 1 1/2" x 3/4" 211 - 1 1/2" x 1" 212 - 1 1/2" x 1 1/4" 247 - 2" x 1/2" 248 - 2" x 3/4" 249 - 2" x 1" 250 - 2" x 1 1/4" 251 - 2" x 1 1/2" 289 - 2 1/2" x 1" 291 - 2 1/2" x 1 1/2" 292 - 2 1/2" x 2" 334 - 3" x 3" x 3/4" 335 - 3" x 3" x 1" 337 - 3" x 1 1/2" 338 - 3" x 2" 339 - 3" x 2 1/2" 420 - 4" x 2" 421 - 4" x 2 1/2" 422 - 4" x 3" 530 - 6" x 6" x 3" 532 - 6" x 4" 585 - 8" x 6" [2] Product may also be marked with the trade designation Westlake Pipe & Fittings. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings§ +++ [1] [2] [G]	CPVC	LASCO Copper Tube Size CPVC Fittings	ASTM D2846
CTS 5° Ell (S x Sp)
1/2" - 1" (4127-xxx)
CTS 45° Ell (S x S)
1/2" - 2" (4117-xxx)
CTS 90 ELL Slip x Slip
1/2" - 2" (4106-xxx)
CTS Bushing
1/2" - 2" (4137-XXX)
CTS Cap
1/2" - 2" (4147-xxx)
CTS Coupling
1/2" - 2" (4129-xxx)
CTS Male Adapter
1/2" - 2" (4136-XXX)
CTS Reducer Coupling
1/2" - 2" (4129-xxx)
CTS Reducing Ell
3/4" - 1/2" (4106-xxx)
CTS Street Adapter
1/2" ( 4161-xxx)
CTS Street Ell (H x S)
1/2" - 1" (4109-xxx)
CTS Tee
1/2" - 2" (4101-xxx)
Drop Ear Slip ELL
1/2" (DE4106-005)
Drop Ear Thread ELL
1/2" (DE4107-005)
IPS x CTS Transition Bushing
1/2" - 2" (4140-xxx)
IPS x CTS Transition Coupling
3/4" - 1" (4141-xxx)
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] xxx designates the following sizes: 002 - 1/4" 003 - 3/8" 005 - 1/2" 007 - 3/4" 010 - 1" 012 - 1 1/4" 015 - 1 1/2" 020 - 2" 025 - 2 1/2" 030 - 3" 040 - 4" 052 - 3/8" x 1/4" 060 - 6" 072 - 1/2" x 1/4" 073 - 1/2" x 3/8" 080 - 8" 101 - 3/4" x 1/2" 130 - 1" x 1/2" 131 - 1" x 3/4" 166 - 1 1/4" x 1/2" 167 - 1 1/4" x 3/4" 168 - 1 1/2" x 1" 209 - 1 1/2" x 1/2" 210 - 1 1/2" x 3/4" 211 - 1 1/2" x 1" 212 - 1 1/2" x 1 1/4" 247 - 2" x 1/2" 248 - 2" x 3/4" 249 - 2" x 1" 250 - 2" x 1 1/4" 251 - 2" x 1 1/2" 289 - 2 1/2" x 1" 291 - 2 1/2" x 1 1/2" 292 - 2 1/2" x 2" 334 - 3" x 3" x 3/4" 335 - 3" x 3" x 1" 337 - 3" x 1 1/2" 338 - 3" x 2" 339 - 3" x 2 1/2" 420 - 4" x 2" 421 - 4" x 2 1/2" 422 - 4" x 3" 530 - 6" x 6" x 3" 532 - 6" x 4" 585 - 8" x 6" [2] Product may also be marked with the trade designation Westlake Pipe & Fittings. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings+ [2]	PVC	LASCO	ASTM D2466
22.5" Elbow (Slip x Slip)
1" - 12" (465-XXX)
22.5" Street Elbow (Slip x Spigot)
1 1/2" - 6"(466-xxx)
45 Degree Ell Slip x SP
1/2" -12" (417-XXX)
45° Ell (SLIP x SLIP) Sch 40
1 1/2" - 12" (423-XXX)
90 Degree Side Outlet Ell (SlipXSlipXFIPT)
1/2" - 1" (414-XXX)
90 Degree Side Outlet Ell (SlipXSlipXSlip)
1/2" - 2" (413-XXX)
90° Ell (FIPT x FIPT)
1/2" - 2" (408-XXX)
90° Ell (SLIP x FIPT)
1/2" - 4" (407-XXX)
90° Ell (SLIP x SLIP)
3/8" - 12" (406-XXX)
90° Ell (SPIGOT x SLIP)
1/2" - 12" (409-XXX)
90° Ell (SPIGOT x SPIGOT)
1 1/2" B1241
90° Street Ell (MIPT x FIPT)
1/2" - 1 1/2" (412-XXX)
90° Street Ell (MIPT x SLIP)
1/2" - 2" (410-XXX)	3/4" x 1/2" (410-XXX)
90° Street Ell (SPIGOT x FIPT)
1/2" - 1 1/2" (411-XXX)
90° SWEEP ELBOW (S x S)
1" - 6" (406-XXX-SW)	1"- 6" (409-XXX-SW)
Threaded Reducer Bushing (MIPT x FIPT)
1/4" - 3" (439-XXX)
Adapter (SLIP x INSERT)
3/4" - 2" (474-XXX)
Adaptor MIPTXFIPT
1/2" x 3/4" (446-XXX)
Bull Head Tee SlipXSlipXSlip Reducers
1/2" - 12" (401-XXX)
Cap (FIPT)
1/2" - 4" (448-XXX)
Coupling (FIPT x FIPT)
1/2" - 2" (430-XXX)
Cap (SLIP)
1/2" - 12" (447-XXX)
Coupling (SLIP x SLIP)
3/8" - 12" (429-XXX)
Cross (SLIP x SLIP x SLIP x SLIP)
1/2" - 4" (420-XXX)
Deep Socket Coupling (SLIP x SLIP)
1 1/2" - 4" (482-XXX)
Female Adapter (FIPT x SLIP)
1/2" - 8" (435-XXX)
Fitting Adapter SP x FIPT
1" x 2" (478-XXX)
Long Socket Coupling
1 1/2" - 2" (428-XXX)
Male Adapter (MIPT x SLIP)
1/2" - 8" (436-XXX)
Male Hose Thread Fitting (MHT x SLIP)
3/4" (MHT-XXX)	3/4" x 1/2" (MHT-XXX)
Manifold cross SlipX SlipXMIPTXMIPT
1" (421A-010)
Manifold Tee SlipX SlipX MIPT
1" (402B-010)
Nested Coupling (SLIP x SLIP)
3/4" - 1" (477-XXX)
Plug (MIPT)
1/2" - 4" (450-XXX)
Plug (SPIGOT)
3/8" - 4" (449-XXX)
Reducer Bushing (SPIGOT x FIPT)
1/8" - 6" (438-XXX)
Reducer Bushing (SPIGOT x SLIP)
3/8" - 12" (437-XXX)
Reducing Ell (SlipXSlipXSP)
2" x 1 1/2" (416-XXX)	2 1/2" x 2" (416-XXX)
Riser Extender MIPT X FIPT
1 1/2" x 2" (434-XXX)
Snap on Tee XFIPT
3/4" (464-XXX)	3/4"x 1/2" (464-XXX)	1" x 1/2" (464-XXX)	1" x 3/4" (464-XXX)
Tee (FIPT x FIPT x FIPT)
1/2" - 1 1/2" (405-XXX)
Tee (SLIPXFIPTXSLIP)
1/2" - 3/4" (403-XXX)
Tee (SLIP x SLIP x FIPT)
1/8" - 12" (402-XXX)
Tee (SLIP x SLIP x SLIP)
3/8" - 12" (401-XXX)
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Product may also be marked with the trade designation Westlake Pipe & Fittings.
Fittings+ [2] [G]	PVC	LASCO	ASTM D2467
45° Ell (SLIP x SLIP)
1/2" - 12"
90 ELL (FIPT x FIPT)
1/4" - 4" (808-XXX)
90° Ell (SLIP x FIPT)
1/4" - 2" (817-XXX)
90° Ell (SLIP x SLIP)
1/4" - 12" (806-XXX)
Cap (SLIP)
1/4" - 6" (847-XXX)
Coupling (SLIP x SLIP)
1/4" - 12" (829-XXX)
Cross Slip x Slip x Slip x Slip
1 1/2" - 4" (820-XXX)
Female Adapter (SLIP x FIPT)
1/4" - 4" (835-XXX)	1/4" - 4" (835-XXX-SR)
Male Adapter (MIPT x SLIP)
1/2" - 4" (836-XXX)
Plug (SLIP)
3/4" - 2" (849-XXX)
Reducer Bushing (Flush style) MPT x BSP
2" x 1" (845-249)
Reducer Bushing (SPIGOT x SLIP)
1/4" - 12" (837-XXX)
Tee (SLIP x SLIP x FIPT)
1/4" - 6" (802-XXX)
Tee (SLIP x SLIP x SLIP)
1/4" - 12" (801-XXX)
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Product may also be marked with the trade designation Westlake Pipe & Fittings. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings+ [2] [G]	PVC	LASCO	ASTM D2464
30° Ell
6" (815-XXX)
45° Ell (FIPT x FIPT)
1/2" - 4" (819-XXX)
90° Ell (FIPT x FIPT)
1/4" - 4" (808-XXX)
Cap (FIPT)
1/4" - 4"
CAP (SLIP)
1/4" - 6" (847-XXX)
Coupling (FIPT x FIPT)
1/4" - 4" (830-XXX)	1/4" - 4" (830-XXX-SR)
Nipple (MPT x MPT)
3/4" x 1/2" (882-101)
Nipple, Thread One End (Toe) (MPT x SPG)
1/2" - 6" (105-XXX)	1/2" - 6" (205-XXX)	3/4" - 6" (207-XXX)	3/4" - 6" (107- XXX)
1" - 6" (110-XXX)	1" - 6" (210-XXX)	1 1/4" - 6" (212-XXX)	1 1/4" - 6" (112-XXX)
1 1/2" - 6" (115-XXX)	1 1/2" - 6" (215-XXX)	2" - 6" (120-XXX)	2" - 6" (220-XXX)
2 1/2" - 6" (125-XXX)	2 1/2" - 6" (225-XXX)	3" - 6" (130-XXX)	3" - 6" (230-XXX)
4" - 6" (140-XXX)	4" - 6" (240-XXX)
Reducer Bushing (MIPT x FIPT)
1/4" - 6" (839-XXX)
Reducer Bushing (SPIGOT x FIPT)
1/4" - 6" (838-XXX)
Tee (FIPT x FIPT x FIPT)
1/4" - 4" (805-XXX)
THD PLUG
1/4" - 4" (850-XXX)
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Product may also be marked with the trade designation Westlake Pipe & Fittings. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings+ [2] [G]	PVC	LASCO	ASTM D2609
90° Ell (INSERT x FIPT)
1/2" - 2" (1407-XXX)
90° Ell (INSERT x MIPT)
1/2" - 2" (1413-XXX)
Adapter, Insert x Spigot x Slip
3/4" x 1" (1432-131)
90° Ell (INSERT x INSERT)
1/2" - 3" (1406-XXX)
Adapter, Insert x Spigot x Slip
1"x1" (1432-101)
Adapter Slip x Insert PVC
3/4" - 2" (474-XXX)
Coupling (INSERT x INSERT)
1/2" - 4" (1429-XXX)
Cross (INSERT x INSERT x INSERT x INSERT)
3/4" - 1" (1420-XXX)
Female Adapter (INSERT x FIPT)
1/2 " - 2" (1435-XXX)
INSERT ADAPTER (INSERT x SPIGOT)
3/4" - 1 1/2" (460-XXX)
Insert Plug
1/2" - 2" (1449-XXX)
Male Adapter (INSERT x MIPT)
1/2" - 2" (1436-XXX)
Side Outlet ELL FIPT x Insert
3/4" x 3/4" x 1/2" (1414-XXX)	1" x 1" x 1/2" (1414-XXX)	1" x 1" x 3/4" (1414-XXX)
Side Outlet ELL Insert x Insert
3/4" (1416-XXX)	3/4" x 1/2" (1416-XXX)	1" x 1/2" (1416-XXX)	1" x 3/4" (1416-XXX)
Tee (INSERT x INSERT x FIPT)
1/2" - 2" (1402-XXX)
Tee (INSERT x INSERT x MIPT)
1 /2" - 1 1/2" (1403-XXX)
Tee (INSERT x INSERT x INSERT)
1/2" - 3" (1401-XXX)
Transition Tee, Slip x Slip x Insert
2" x 2" x 1" (1102-249)
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Product may also be marked with the trade designation Westlake Pipe & Fittings. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings§ +++ [1] [2] [G]	CPVC	LASCO	CSA B137.6
CTS 5° Ell (S x Sp)
1/2" - 1" (4127-xxx)
CTS 45° Ell (S x S)
1/2" - 2" (4117-xxx)
CTS 90 Ell Slip x Slip
1/2" - 2" (4106-xxx)
CTS Bushing
1/2" - 2" (4137-XXX)
CTS Cap
1/2" - 2" (4147-xxx)
CTS Coupling
1/2" - 2" (4129-xxx)
CTS Male Adapter
1/2" x 3/4" (4136-XXX)
CTS Reducer Coupling
1/2" - 2" (4129-xxx)
CTS Reducing Ell
3/4" - 1/2" (4106-xxx)
CTS Street Adapter
1/2" ( 4161-xxx)
CTS Street Ell (H x S)
1/2" - 1" (4109-xxx)
CTS Tee
1/2" - 2" (4101-xxx)
Drop Ear Slip ELL
1/2" (DE4106-005)
Drop Ear Thread ELL
1/2" (DE4107-005)
IPS x CTS Transition Bushing
1/2" - 2" (4140-xxx)
IPS x CTS Transition Coupling
3/4" - 1" (4141-xxx)
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] xxx designates the following sizes: 002 - 1/4" 003 - 3/8" 005 - 1/2" 007 - 3/4" 010 - 1" 012 - 1 1/4" 015 - 1 1/2" 020 - 2" 025 - 2 1/2" 030 - 3" 040 - 4" 052 - 3/8" x 1/4" 060 - 6" 072 - 1/2" x 1/4" 073 - 1/2" x 3/8" 080 - 8" 101 - 3/4" x 1/2" 130 - 1" x 1/2" 131 - 1" x 3/4" 166 - 1 1/4" x 1/2" 167 - 1 1/4" x 3/4" 168 - 1 1/2" x 1" 209 - 1 1/2" x 1/2" 210 - 1 1/2" x 3/4" 211 - 1 1/2" x 1" 212 - 1 1/2" x 1 1/4" 247 - 2" x 1/2" 248 - 2" x 3/4" 249 - 2" x 1" 250 - 2" x 1 1/4" 251 - 2" x 1 1/2" 289 - 2 1/2" x 1" 291 - 2 1/2" x 1 1/2" 292 - 2 1/2" x 2" 334 - 3" x 3" x 3/4" 335 - 3" x 3" x 1" 337 - 3" x 1 1/2" 338 - 3" x 2" 339 - 3" x 2 1/2" 420 - 4" x 2" 421 - 4" x 2 1/2" 422 - 4" x 3" 530 - 6" x 6" x 3" 532 - 6" x 4" 585 - 8" x 6" [2] Product may also be marked with the trade designation Westlake Pipe & Fittings. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Facility : Wichita Falls, TX

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe[1]	PVC	Westlake Pipe & Fittings	ASTM D2665
1 1/4" - 12" Sch 40
[1] Product may also be marked with trade designation Westlake Canada, Inc. DBA Westlake Pipe & Fittings.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [1] [2] [G]	PVC	Westlake Pipe & Fittings	ASTM D1785
1/2" - 16" Sch 40
1/2" - 16" Sch 80
1/2" - 12" Sch 120
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product may also be marked with trade designation Westlake Canada, Inc. DBA Westlake Pipe & Fittings. [2] Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [1] [2] [G]	PVC	Westlake Pipe & Fittings	ASTM D2241
1/2" - 6" SDR 13.5
>= 3/4" SDR 17
>= 3/4" SDR 21
>= 1" SDR 26
>= 1" SDR 32.5
>= 3" SDR 41
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product may also be marked with trade designation Westlake Canada, Inc. DBA Westlake Pipe & Fittings. [2] Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Janesville, WI

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe[1] [2]	PVC	Westlake Pipe & Fittings	ASTM D2665
1 1/4" - 24" Sch 40
[1] Product may also be marked with trade designation Westlake Canada, Inc. DBA Westlake Pipe & Fittings. [2] Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility.
Pipe[1]	PVC	Westlake Pipe & Fittings	ASTM D2949
3.25"
[1] Product may also be marked with trade designation Westlake Canada, Inc. DBA Westlake Pipe & Fittings.
Pipe¢ [1]	PVC	Westlake Pipe & Fittings	ASTM F3128
1 1/4" - 6"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product may also be marked with trade designation Westlake Canada, Inc. DBA Westlake Pipe & Fittings.
Pipe[1]	PVC	Westlake Pipe & Fittings	ASTM F891
1 1/4" - 8" Sch 40
[1] Product may also be marked with trade designation Westlake Canada, Inc. DBA Westlake Pipe & Fittings.

NOTE: Only products bearing the NSF Mark on the product,product packaging, and/or
      documentation shipped with the product are Certified.

Electrical Conduit and Accessories

Product Type	Material Type	Trade Name	Product Standard
Pipe*	PVC	Westlake Pipe and Fittings Corporation	UL 651
1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 3", 4", 6" Sch 40
* Complies with requirements for above ground, underground or in-door use; sunlight resistance and use with maximum 90°C wire.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [1] [2] [G]	PVC	Westlake Pipe & Fittings	ASTM D1785
1/2" - 8" Sch 120
1/2" - 12" Sch 80
1/2" - 24" Sch 40
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product may also be marked with trade designation Westlake Canada, Inc. DBA Westlake Pipe & Fittings, or AquaSpring. [2] Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [1] [2] [G]	PVC	Westlake Pipe & Fittings	ASTM D2241
1/2" - 6" SDR 13.5
>= 3/4" SDR 17
>= 3/4" SDR 21
>= 1" SDR 26
>= 1" SDR 32.5
>= 3" SDR 41
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product may also be marked with trade designation Westlake Canada, Inc. DBA Westlake Pipe & Fittings, or AquaSpring. [2] Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [1] [G]	PVC	Certa-Lok® RJIB pipe with Fluid-Tite™ Gasket	AWWA C900
>= 6"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product may also be marked with trade designation Westlake Canada, Inc. DBA Westlake Pipe & Fittings, or AquaSpring. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [1] [G]	PVC	Westlake Pipe & Fittings	AWWA C900
4" - 48"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product may also be marked with trade designation Westlake Canada, Inc. DBA Westlake Pipe & Fittings, or AquaSpring. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Well Casings

Product Type	Material Type	Trade Name	Product Standard
Well Casings[1] [2] [G]	PVC	Westlake Pipe & Fittings	ASTM F480
2" - 4 1/2" Sch 40
2" - 4 1/2" SDR 17
2" - 4 1/2" SDR 21
2" - 4 1/2" SDR 26
[1] Product may also be marked with trade designation Westlake Canada, Inc. DBA Westlake Pipe & Fittings. [2] Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Well Casings[1] [2] [G]	PVC	Westlake Pipe & Fittings	ASTM F480
5" - 16" Sch 40
5" - 16" SDR 17
5" - 16" SDR 21
5" - 16" SDR 26
[1] Product may also be marked with trade designation Westlake Canada, Inc. DBA Westlake Pipe & Fittings. [2] Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Well Casings^ [2] [G]	PVC 1120 IC-1	Certa-Lok™ Well Casing	ASTM F480
16" Sch 40
10" - 16" SDR 17
16" SDR 21
16" SDR 26
^ Certa-Lok™ Well Casing and Sure-Fit™ Well Casing have been specifically evaluated for well casing applications and have not been evaluated for the effects of field slotting. [2] Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Number of matching Manufacturers is 1
Number of matching Products is 2264
Processing time was 1 seconds

NSF Product and Service Listings

Did you know?

Connect with NSF