NSF Product and Service Listings
These NSF Official Listings are current as of Thursday, January 15, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?Company=34260&Standard=014&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| Oil Creek Plastics | |
| East Titusville Road | |
| P.O. Box 385 | |
| Titusville, PA 16354 | |
| United States | |
| 800-537-3661 | |
| 814-827-3661 | |
| Visit this company's website |
Facility : Titusville, PA
Gas Applications - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* § |
PE 2708 |
OIL CREEK PLASTICS |
ASTM D2513 |
|||
| 1/2" CTS X .090" WALL | ||||||
| 1/2" IPS DR 9.3 | ||||||
| 3/4", 1", 1 1/4", 1 1/2", 2", 3", 4", 6" IPS DR 11 | ||||||
| 1" CTS X .099" WALL | ||||||
| 1 1/4" IPS DR 10 | ||||||
| 3", 4" IPS DR 11.5 | ||||||
| 4", 6" IPS DR 13.5 | ||||||
* Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe* § |
PE 4710 |
OIL CREEK PLASTICS |
ASTM D2513 |
|||
| 1/2" IPS DR 9.33 | ||||||
| 3/4" , 1" , 1-1/4" , 1-1/2" , 2" , 3" , 4" IPS DR 11 | ||||||
| 1/2" CTS x .090" wall | ||||||
| 1" CTS x .099" wall | ||||||
| 1" CTS x .101" wall | ||||||
| 1-1/4" CTS x .121" wall | ||||||
* Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe$ + |
PE 3608/4710 |
Oil Creek Aqua-Jet |
ASTM D2239 |
|||
| 3/4" - 2" SIDR 5.3 | ||||||
| 3/4" - 2" SIDR 7 | ||||||
| 3/4" - 2" SIDR 9 | ||||||
| 1/2" - 2" SIDR 11.5[2] | ||||||
|
3/4" - 3" SIDR 15[2] |
||||||
|
3/4" - 2" SIDR 19[2] |
||||||
[2] These pipe sizes shall not be marked with a CC oxidative resistance classification and
are not certified for use in applications where an oxidative resistance classification
(e.g. CC1, CC2, CC3), in accordance with ASTM D3350, is required.
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
Pipe$ + |
PE 3608/4710 |
 |
ASTM D2239 |
|||
| 3/4" - 2" SIDR 5.3 | ||||||
| 3/4" - 2" SIDR 7 | ||||||
| 3/4" - 2" SIDR 9 | ||||||
| 1/2" - 2" SIDR 11.5[2] | ||||||
|
3/4" - 3" SIDR 15[2] |
||||||
|
3/4" - 2" SIDR 19[2] |
||||||
[2] These pipe sizes shall not be marked with a CC oxidative resistance classification and
are not certified for use in applications where an oxidative resistance classification
(e.g. CC1, CC2, CC3), in accordance with ASTM D3350, is required.
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
Tubing# ^ § +++ [4] |
PE-RT 4710 |
AQUA-PERT |
ASTM F2769 |
|||
| 1/8" - 6" SDR 9 | ||||||
# Certified AQUA-PERT is coextruded natural tubing with a red, blue, or white outer layer.
^ Meets the chlorine resistance requirements of ASTM F2769 when tested in accordance with
ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[4] Tubing certified against ASTM F2769 and CSA B137.18 shall include the standard
designation(s) of the fitting system(s) for which the tubing is recommended by the
manufacturer, and shall be marked, as applicable, with the following fitting system
designation(s): ASTM F1807, ASTM F2159 and ASTM F1960.
|
||||||
Tubing# ^ ¢ § +++ [1] [4] |
PE-RT 4710 |
AQUA-PERT |
CSA B137.18 |
|||
| 1/8" - 6" SDR 9 | ||||||
# Certified AQUA-PERT is coextruded natural tubing with a red, blue, or white outer layer.
^ Meets the chlorine resistance requirements of ASTM F2769 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[1] Tubing certified against CSA B137.18 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
marked, as applicable, with the following fitting system designation(s): ASTM F1807,
ASTM F1960, and ASTM F2159.
[4] Tubing certified against ASTM F2769 and CSA B137.18 shall include the standard
designation(s) of the fitting system(s) for which the tubing is recommended by the
manufacturer, and shall be marked, as applicable, with the following fitting system
designation(s): ASTM F1807, ASTM F2159 and ASTM F1960.
|
||||||
Tubing$ + |
PE 3608/4710 |
Oil Creek Aqua-Jet (CTS) |
ASTM D2737 |
|||
| 3/4" - 2" SDR 9 | ||||||
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
Tubing+ |
PE 3608/4710 |
|
ASTM D2737 |
|||
| 3/4" - 2" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
Pipe$ + |
PE 3608/4710 |
Aqua-Blue |
ASTM D2239 |
|||
| 3/4" - 2" SIDR 5.3 | ||||||
| 3/4" - 2" SIDR 7 | ||||||
| 3/4" - 2" SIDR 9 | ||||||
| 1/2" - 2" SIDR 11.5[2] | ||||||
|
3/4" - 2" SIDR 15[2] |
||||||
|
3/4" - 2" SIDR 19[2] |
||||||
[2] These pipe sizes shall not be marked with a CC oxidative resistance classification and
are not certified for use in applications where an oxidative resistance classification
(e.g. CC1, CC2, CC3), in accordance with ASTM D3350, is required.
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
Pipe+ |
PE 3608/4710 |
Aqua-Blue |
ASTM D2737 |
|||
| 3/4" - 2" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
Tubing$ + |
PE 3608/4710 |
Oil Creek Aqua-Jet (OD) |
ASTM D3035 |
|||
| 1/2" DR 7[2] | ||||||
|
1/2" DR 9[2] |
||||||
|
1/2" - 3" DR 11[2] |
||||||
|
1/2" - 3" DR 13.5[2] |
||||||
|
3/4" - 3" DR 7 |
||||||
| 3/4" - 3" DR 9 | ||||||
| 3/4" - 3" DR 15.5[2] | ||||||
|
3/4" - 3" DR 17[2] |
||||||
|
1" - 3" DR 21[2] |
||||||
[2] These pipe sizes shall not be marked with a CC oxidative resistance classification and
are not certified for use in applications where an oxidative resistance classification
(e.g. CC1, CC2, CC3), in accordance with ASTM D3350, is required.
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
Tubing$ + |
PE 3608/4710 |
Oil Creek Aqua-Jet (OD) |
ASTM F714 |
|||
| 4" - 8" DR 7 | ||||||
| 4" - 8" DR 7.3 | ||||||
| 4" - 8" DR 9 | ||||||
| 4" - 8" DR 11 | ||||||
| 4" - 8" DR 13.5 | ||||||
| 4" - 8" DR 15.5[3] | ||||||
|
4" - 8" DR 17 |
||||||
| 4" - 8" DR 21 | ||||||
[3] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure the
product is suitable for the intended application.
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
Radiant Floor Heating
| Product Type | Material Type | Trade Name | Product Standard | |||
Tubing! * ¥ [1] [2] [3] |
PE-RT PE 2708 |
Heatflex |
ASTM F2623 |
|||
| 5/16" SDR 9 | ||||||
| 3/8" SDR 9 | ||||||
| 1/2" SDR 9 | ||||||
| 5/8" SDR 9 | ||||||
| 3/4" SDR 9 | ||||||
| 1" SDR 9 | ||||||
! Heatflex/[Oil Creek Plastics Oil Rig Logo] PE-RT pipe is orange in color.
* Product is barrier tubing.
¥ Product is Certified to the Uniform Mechanical Code™. Installation in accordance with
the manufacturer's instructions and the requirements of the latest edition of the
Uniform Mechanical Code™.
[1] This barrier tubing product has been evaluated against the performance requirements of
ASTM F2623. This product is not NSF Certified for use in a potable water distribution
system. This product has been evaluated for use in radiant floor heating (NSF-rfh)
applications only.
[2] Meets the chlorine resistance requirements of ASTM F2623 when tested in accordance with
ASTM F2023.
[3] Tubing certified against ASTM F2623 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
marked, as applicable, with the following fitting system designation(s): ASTM F1807 and
ASTM F2159.
|
||||||
Tubing! * ¥ [1] [2] [3] |
PE-RT PE 2708 |
PERTCO |
ASTM F2623 |
|||
| 5/16" SDR 9 | ||||||
| 3/8" SDR 9 | ||||||
| 1/2" SDR 9 | ||||||
| 5/8" SDR 9 | ||||||
| 3/4" SDR 9 | ||||||
| 1" SDR 9 | ||||||
! Heatflex/[Oil Creek Plastics Oil Rig Logo] PE-RT pipe is orange in color.
* Product is barrier tubing.
¥ Product is Certified to the Uniform Mechanical Code™. Installation in accordance with
the manufacturer's instructions and the requirements of the latest edition of the
Uniform Mechanical Code™.
[1] This barrier tubing product has been evaluated against the performance requirements of
ASTM F2623. This product is not NSF Certified for use in a potable water distribution
system. This product has been evaluated for use in radiant floor heating (NSF-rfh)
applications only.
[2] Meets the chlorine resistance requirements of ASTM F2623 when tested in accordance with
ASTM F2023.
[3] Tubing certified against ASTM F2623 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
marked, as applicable, with the following fitting system designation(s): ASTM F1807 and
ASTM F2159.
|
||||||
Tubing* ¥ ‡ [1] [2] [3] |
PE-RT PE 2708 |
Propak Heatflex |
ASTM F2623 |
|||
| 5/16" SDR 9 | ||||||
| 3/8" SDR 9 | ||||||
| 1/2" SDR 9 | ||||||
| 5/8" SDR 9 | ||||||
| 3/4" SDR 9 | ||||||
| 1" SDR 9 | ||||||
* Product is barrier tubing.
¥ Product is Certified to the Uniform Mechanical Code™. Installation in accordance with
the manufacturer's instructions and the requirements of the latest edition of the
Uniform Mechanical Code™.
‡ Propak Heatflex/[Oil Creek Plastics Oil Rig Logo] PE-RT pipe is orange in color.
[1] This barrier tubing product has been evaluated against the performance requirements of
ASTM F2623. This product is not NSF Certified for use in a potable water distribution
system. This product has been evaluated for use in radiant floor heating (NSF-rfh)
applications only.
[2] Meets the chlorine resistance requirements of ASTM F2623 when tested in accordance with
ASTM F2023.
[3] Tubing certified against ASTM F2623 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
marked, as applicable, with the following fitting system designation(s): ASTM F1807 and
ASTM F2159.
|
||||||
Tubing! * ¥ ‡ [1] [2] [3] |
PE-RT PE 2708 |
|
ASTM F2623 |
|||
| 5/16" SDR 9 | ||||||
| 3/8" SDR 9 | ||||||
| 1/2" SDR 9 | ||||||
| 5/8" SDR 9 | ||||||
| 3/4" SDR 9 | ||||||
| 1" SDR 9 | ||||||
! Heatflex/[Oil Creek Plastics Oil Rig Logo] PE-RT pipe is orange in color.
* Product is barrier tubing.
¥ Product is Certified to the Uniform Mechanical Code™. Installation in accordance with
the manufacturer's instructions and the requirements of the latest edition of the
Uniform Mechanical Code™.
‡ Propak Heatflex/[Oil Creek Plastics Oil Rig Logo] PE-RT pipe is orange in color.
[1] This barrier tubing product has been evaluated against the performance requirements of
ASTM F2623. This product is not NSF Certified for use in a potable water distribution
system. This product has been evaluated for use in radiant floor heating (NSF-rfh)
applications only.
[2] Meets the chlorine resistance requirements of ASTM F2623 when tested in accordance with
ASTM F2023.
[3] Tubing certified against ASTM F2623 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
marked, as applicable, with the following fitting system designation(s): ASTM F1807 and
ASTM F2159.
|
||||||
Number of matching Manufacturers is 1
Number of matching Products is 77
Processing time was 0 seconds
