NSF Product and Service Listings
These NSF Official Listings are current as of Thursday, January 15, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?Company=36340&Standard=014&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| Infra Pipe Solutions Ltd. | |
| 6750 Century Avenue | |
| Unit 303 | |
| Mississauga, ON L5N 0B7 | |
| Canada | |
| 905-858-0206 | |
| Visit this company's website |
Facility : Huntsville, Ontario, Canada
Drain - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe |
PE 3608/4710 |
Weholite |
ASTM F894 |
|||
| 18" - 120" RSC 100 | ||||||
| 18" - 132" RSC 160 | ||||||
| 18" - 132" RSC 250 | ||||||
| 18" - 132" RSC 400 | ||||||
Gas Applications - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* ¢ |
PE 4710 |
GAS HD |
CSA B137.4 |
|||
| 1/2” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 3/4” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 1” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 1 1/4” NPS DR 8.8, 10, 11, 13.5, 17, 21 | ||||||
| 1 1/2” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 2” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 2 1/2” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 3” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 4” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 6” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 8” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 10” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 12” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 14” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 16” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| N/A DR 21 | ||||||
| 1/4" NTS | ||||||
| 3/8" NTS | ||||||
| 1/2" NTS | ||||||
| 3/4" NTS | ||||||
| 1" NTS | ||||||
| 1 1/4" NTS | ||||||
* Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
||||||
Pipe* ¢ |
PE 2708 |
GAS MD |
CSA B137.4 |
|||
| 1/2” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 3/4” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 1” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 1 1/4” NPS DR 8.8, 10, 11, 13.5, 17, 21 | ||||||
| 1 1/2” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 2” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 2 1/2” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 3” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 4” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 6” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 8” NPS DR 11, 13.5, 17, 21 | ||||||
| 10” NPS DR 13.5, 17, 21 | ||||||
| 12” NPS DR 13.5, 17, 21 | ||||||
| 14” NPS DR 17, 21 | ||||||
| 16” NPS DR 17, 21 | ||||||
| 18" NPS DR 21 | ||||||
| 1/4" NTS | ||||||
| 3/8" NTS | ||||||
| 1/2" NTS | ||||||
| 3/4" NTS | ||||||
| 1" NTS | ||||||
| 1 1/4" NTS | ||||||
* Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
||||||
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe$ + |
PE 3608/4710 |
Sclairpipe |
ASTM D3035 |
|||
| 1/2" DR 7[1] | ||||||
|
3/4" - 3" DR 7 |
||||||
| 1/2" - 3" DR 7.3[1] [2] | ||||||
|
1/2" DR 9[1] |
||||||
|
3/4" - 3" DR 9 |
||||||
| 1/2" - 3" DR 9.3[1] [2] | ||||||
|
1/2" - 3" DR 11[1] |
||||||
|
1/2" - 3" DR 13.5[1] |
||||||
|
1/2" DR 15.5[1] [2] |
||||||
|
3/4" - 3" DR 15.5[1] |
||||||
|
1/2" DR 17[1] [2] |
||||||
|
3/4" - 3" DR 17[1] |
||||||
|
1/2" - 3/4" DR 21[1] [2] |
||||||
|
1" - 3" DR 21[1] |
||||||
|
1/2" - 3/4" DR 26[1] [2] |
||||||
|
1" - 3" DR 26[1] |
||||||
|
1/2" - 1 1/4" DR 32.5[1] [2] |
||||||
|
1 1/2" - 3" DR 32.5[1] |
||||||
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and
are not certified for use in applications where an oxidative resistance classification
(e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required.
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and
are not certified for use in applications where an oxidative resistance classification
(e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required.
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure the
product is suitable for the intended application.
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
Pipe$ + |
PE 3608/4710 |
Sclairpipe |
ASTM F714 |
|||
| 4" - 63" (IPS & DIPS) DR 7[2] | ||||||
|
4" - 63" (IPS & DIPS) DR 7.3[2] |
||||||
|
4" - 63" (IPS & DIPS) DR 9[2] |
||||||
|
4" - 63" (IPS & DIPS) DR 9.3[2] |
||||||
|
4" - 63" (IPS & DIPS) DR 11[2] |
||||||
|
4" - 63" (IPS & DIPS) DR 13.5[2] |
||||||
|
4" - 63" (IPS & DIPS) DR 14.5[2] |
||||||
|
4" - 63" (IPS & DIPS) DR 15.5[2] |
||||||
|
4" - 63" (IPS & DIPS) DR 17[2] |
||||||
|
4" - 63" (IPS & DIPS) DR 21[2] |
||||||
|
4" - 63" (IPS & DIPS) DR 26[2] |
||||||
|
4" - 63" (IPS & DIPS) DR 32.5[2] |
||||||
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure the
product is suitable for the intended application.
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
Pipe$ + |
PE 4710 |
Sclairpipe |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 | ||||||
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
Pipe$ + [2] |
PE 4710 |
Sclairpipe |
AWWA C906 |
|||
| 4" - 63" SDR 7 | ||||||
| 4" - 63" SDR 7.3 | ||||||
| 4" - 63" SDR 9 | ||||||
| 4" - 63" SDR 9.3 | ||||||
| 4" - 63" SDR 11 | ||||||
| 4" - 63" SDR 13.5 | ||||||
| 4" - 63" SDR 14.5 | ||||||
| 4" - 63" SDR 15.5 | ||||||
| 4" - 63" SDR 17 | ||||||
| 4" - 63" SDR 21 | ||||||
| 4" - 63" SDR 26 | ||||||
| 4" - 63" SDR 32.5 | ||||||
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure the
product is suitable for the intended application.
|
||||||
Pipe |
PE 3608/4710 |
Sclairpipe |
CSA B137.1 |
|||
| 1/2" - 65" | ||||||
Sewer Main - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe |
PE 3608/4710 |
Weholite |
ASTM F894 |
|||
| 18" - 120" RSC 100 | ||||||
| 18" - 120" RSC 400 | ||||||
| 18" - 132" RSC 160 | ||||||
| 18" - 132" RSC 250 | ||||||
Facility : Saskatoon, Saskatchewan, Canada
Drain - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe |
PE 3608/4608/4710 |
Weholite |
ASTM F894 |
|||
| 18" - 120" RSC 100 | ||||||
| 18" - 132" RSC 160 | ||||||
| 18" - 132" RSC 250 | ||||||
| 18" - 132" RSC 400 | ||||||
Gas Applications - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* ¢ |
PE 4710 |
GAS HD |
CSA B137.4 |
|||
| 1/2” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 3/4” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 1” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 1 1/4” NPS DR 8.8, 10, 11, 13.5, 17, 21 | ||||||
| 1 1/2” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 2” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 2 1/2” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 3” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 4” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 6” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 8” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 10” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 12” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 14” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 16” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 18" NPS DR 21 | ||||||
| 1/4" NTS | ||||||
| 3/8" NTS | ||||||
| 1/2" NTS | ||||||
| 3/4" NTS | ||||||
| 1" NTS | ||||||
| 1 1/4" NTS | ||||||
* Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
||||||
Pipe* ¢ |
PE 2708 |
GAS MD |
CSA B137.4 |
|||
| 1/2” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 3/4” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 1” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 1 1/4” NPS DR 8.8, 10, 11, 13.5, 17, 21 | ||||||
| 1 1/2” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 2” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 2 1/2” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 3” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 4” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 6” NPS DR 8.8, 11, 13.5, 17, 21 | ||||||
| 8” NPS DR 11, 13.5, 17, 21 | ||||||
| 10” NPS DR 13.5, 17, 21 | ||||||
| 12” NPS DR 13.5, 17, 21 | ||||||
| 14” NPS DR 17, 21 | ||||||
| 16” NPS DR 17, 21 | ||||||
| 18" NPS DR 21 | ||||||
| 1/4" NTS | ||||||
| 3/8" NTS | ||||||
| 1/2" NTS | ||||||
| 3/4" NTS | ||||||
| 1" NTS | ||||||
| 1 1/4" NTS | ||||||
* Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
||||||
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* + [2] |
PE 4710 |
Sclairpipe |
AWWA C906 |
|||
| 4" - 63" SDR 7 | ||||||
| 4" - 63" SDR 7.3 | ||||||
| 4" - 63" SDR 9 | ||||||
| 4" - 63" SDR 9.3 | ||||||
| 4" - 63" SDR 11 | ||||||
| 4" - 63" SDR 13.5 | ||||||
| 4" - 63" SDR 14.5 | ||||||
| 4" - 63" SDR 15.5 | ||||||
| 4" - 63" SDR 17 | ||||||
| 4" - 63" SDR 21 | ||||||
| 4" - 63" SDR 26 | ||||||
| 4" - 63" SDR 32.5 | ||||||
* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure the
product is suitable for the intended application.
|
||||||
Pipe* + |
PE 3608/4710 |
Sclairpipe |
ASTM D3035 |
|||
| 1/2" DR 7[1] | ||||||
|
3/4" - 3" DR 7 |
||||||
| 1/2" - 3" DR 7.3[1] [2] | ||||||
|
1/2" DR 9[1] |
||||||
|
3/4" - 3" DR 9 |
||||||
| 1/2" - 3" DR 9.3[1] [2] | ||||||
|
1/2" - 3" DR 11[1] |
||||||
|
1/2" - 3" DR 13.5[1] |
||||||
|
1/2" DR 15.5[1] [2] |
||||||
|
3/4" - 3" DR 15.5[1] |
||||||
|
1/2" DR 17[1] [2] |
||||||
|
3/4" - 3" DR 17[1] |
||||||
|
1/2" - 3/4" DR 21[1] [2] |
||||||
|
1" - 3" DR 21[1] |
||||||
|
1/2" - 3/4" DR 26[1] [2] |
||||||
|
1" - 3" DR 26[1] |
||||||
|
1/2" - 1 1/4" DR 32.5[1] [2] |
||||||
|
1 1/2" - 3" DR 32.5[1] |
||||||
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and
are not certified for use in applications where an oxidative resistance classification
(e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required.
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and
are not certified for use in applications where an oxidative resistance classification
(e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required.
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure the
product is suitable for the intended application.
* These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
Pipe* + |
PE 3608/4710 |
Sclairpipe |
ASTM F714 |
|||
| 4" - 63" (IPS & DIPS) DR 7[2] | ||||||
|
4" - 63" (IPS & DIPS) DR 7.3[2] |
||||||
|
4" - 63" (IPS & DIPS) DR 9[2] |
||||||
|
4" - 63" (IPS & DIPS) DR 9.3[2] |
||||||
|
4" - 63" (IPS & DIPS) DR 11[2] |
||||||
|
4" - 63" (IPS & DIPS) DR 13.5[2] |
||||||
|
4" - 63" (IPS & DIPS) DR 14.5[2] |
||||||
|
4" - 63" (IPS & DIPS) DR 15.5[2] |
||||||
|
4" - 63" (IPS & DIPS) DR 17[2] |
||||||
|
4" - 63" (IPS & DIPS) DR 21[2] |
||||||
|
4" - 63" (IPS & DIPS) DR 26[2] |
||||||
|
4" - 63" (IPS & DIPS) DR 32.5[2] |
||||||
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure the
product is suitable for the intended application.
* These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
Pipe* + |
PE 4710 |
Sclairpipe |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 | ||||||
* These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
Pipe |
PE 3608/4710 |
Sclairpipe |
CSA B137.1 |
|||
| 1/2" - 65" | ||||||
Sewer Main - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe |
PE 3608/4710 |
Weholite |
ASTM F894 |
|||
| 18" - 120" RSC 100 | ||||||
| 18" - 120" RSC 400 | ||||||
| 18" - 132" RSC 160 | ||||||
| 18" - 132" RSC 250 | ||||||
Number of matching Manufacturers is 1
Number of matching Products is 192
Processing time was 0 seconds
