NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, January 15, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?Company=3T400&Standard=0MP&

MP
Mechanical Plumbing Products

Cast Iron Soil Pipe Institute
2401 Fieldcrest Drive
Mundelein, IL 60060
United States
224-864-2910
Visit this company's website

Facility : Oakboro, NC

Product Type	Material Type	Trade Name	Product Standard
Hub/Spigot Soil Pipe# § [1]	Cast Iron	CHAR	ASTM A74
Double Hub In 5 foot nominal lengths
2"	3"	4"	5"
6"
In 5 and 10 foot nominal lengths
10"	12"	15"	2"
3"	4"	5"	6"
8"
Single Hub
10" x 30"	12" x 30"	15" x 30"	8" x 30"
# This facility is a member of the Cast Iron Soil Pipe Institute. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] High Performance Edge Coating is approved for use on these products.
Hub/Spigot Soil# § [1]*	Cast Iron	CHAR	ASTM A74
1/16 Bend
10"	12"	15"	2"
3"	4"	5"	6"
8"
1/4 Bend
10"	12"	15"	2"
3"	4"	5"	6"
8"
1/6 Bend
2"	3"	4"	6"
1/8 Bend
10"	12"	15"	2"
3"	4"	5"	6"
8"
Blind Plug (Pipe Plug)
10"	12"	15"	2"
3"	4"	5"	6"
8"
Cleanout Tee with Southern Brass Plug
3"	4"	5"	6"
Combination
2"	3"	3" x 2"	4"
4" x 2"	4" x 3"	5"	5" x 4"
6"	6" x 2"	6" x 3"	6" x 4"
6" x 5"	8"	8" x 4"	8" x 6"
Deep Seal P Trap
2"	3"	4"
Double Combination
10"	12"	15"	2"
3"	4"	5"	6"
8"
Double Hub Shorties
2" x 30"	3" x 30"	4" x 30"
Double Wye
10"	12"	15"	2"
3"	4"	4" x 3"	6"
6" x 4"	8"
Increaser
4" x 6"	6" x 8"
Iron Body Cleanout Ferrules
10"	12"	15"	2"
3"	4"	5"	6"
8"
Long 1/8 Bend
2" x 18"	3" x 18"	4" x 18"
Long Sweep
10"	12"	15"	2"
3"	4"	5"	6"
8"
P Trap
2"	3"	4"	5"
6"	8"
Reducer
10" x 4"	10" x 6"	10" x 8"	12" x 10"
12" x 4"	12" x 6"	12" x 8"	15" x 10"
15" x 12"	15" x 8"	3" x 2"	4" x 2"
4" x 3"	5" x 3"	5" x 4"	6" x 3"
6" x 4"	6" x 5"	8" x 4"	8" x 5"
8" x 6"
Running Trap with Double Hub Vent
10" x 8"	12" x 6"	3" x 3"	4" x 4"
5" x 4"	6" x 4"	6" x 6"	8" x 4"
8" x 6"
Running Trap with Single Hub Vent
3" x 3"	4" x 4"	5" x 4"	6" x 4"
Sanitary Cross
4"
Sanitary Tapped Tee
2" x 1 1/2"	2" x 2"	3" x 2"	4" x 2"
Sanitary Tee
10"	10" x 6"	10" x 8"	12"
12" x 8"	15"	15" x 8"	2"
3"	3" x 2"	4"	4" x 2"
4" x 3"	5"	6"	6" x 3"
6" x 4"	8"	8" x 4"	8" x 6"
Short Sweep
10"	12"	2"	3"
4"	5"	6"	8"
Straight Tee
4" x 2"
Tapped Tee
3" x 2"	4" x 2"	4" x 3"	5" x 4"
6" x 4"
Wye
10"	10" x 3"	10" x 4"	10" x 5"
10" x 6"	10" x 8"	12"	12" x 10"
12" x 4"	12" x 5"	12" x 6"	12" x 8"
15"	15" x 10"	15" x 12"	15" x 8"
2"	3"	3" x 2"	4"
4" x 2"	4" x 3"	5"	5" x 2"
5" x 3"	5" x 4"	6"	6" x 2"
6" x 3"	6" x 4"	6" x 5"	8"
8" x 2"	8" x 3"	8" x 4"	8" x 5"
8" x 6"
# This facility is a member of the Cast Iron Soil Pipe Institute. * All Listed products from this facility are NSF Certified, whether or not they bear the NSF Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] High Performance Edge Coating is approved for use on these products.
Hub/Spigot Soil# § [1]*	Cast Iron	CHAR	ASTM A74
1/16 Bend
10"	12"	15"	2"
3"	4"	5"	6"
8"
1/4 Bend
10"	12"	15"	2"
3"	4"	5"	6"
8"
1/4 Bend with High Heel Inlet
4" x 2"
1/4 Bend with Low Heel Inlet
3" x 2"	4" x 2"
1/5 Bend
3"	4"
1/6 Bend
2"	3"	4"	5"
6"	8"
1/8 Bend
10"	12"	15"	2"
3"	4"	5"	6"
8"
Blind Plug (Pipe Plug)
10"	12"	15"	2"
3"	4"	5"	6"
8"
Cleanout Ferrules
10"	12"	15"	2"
3"	4"	5"	6"
8"
Cleanout Tee with Southern Plug
12"	2"	3"	4"
5"	6"
Closet Bend
3" x 16" x 16"
Closet Bend
3" x 4" x 10" x 16"
Closet Bend
3" x 4" x 12" x 12"	3" x 4" x 16" x 16"	3" x 4" x 18" x 18"	3" x 4" x 6" x 12"
3" x 4" x 6" x 16"	3" x 4" x 8" x 18"	4" x 10" x 12"	4" x 10" x 16"
4" x 12" x 12"	4" x 12" x 16"	4" x 12" x 18"
Closet Bend
4" x 14" x 16"
Closet Bend
4" x 14" x 18"	4" x 16" x 16"
Closet Bend
4" x 16" x 18"
Closet Bend
4" x 18" x 18"	4" x 4" x 12"	4" x 4" x 16"	4" x 4" x 18"
4" x 6" x 12"	4" x 6" x 16"	4" x 6" x 18"	4" x 8" x 16"
4" x 8" x 18"
Closet Bend with 1 1/2 Tapped
Left - 4" x 16" x 16"	Right - 4" x 16" x 16"	Right and Left Hand - 4" x 16" x 16"	Right and Left Hand - 4" x 6" x 16"
Combination
2"	3"	3" x 2"	4"
4" x 2"	4" x 3"	5"	5" x 2"
5" x 4"	6"	6" x 2"	6" x 3"
6" x 4"	6" x 5"	8"	8" x 2"
8" x 4"	8" x 5"	8" x 6"
Deep Seal P Trap
2"	3"	4"	6"
Double Combination
2"	3"	3" x 2"	4"
4" x 2"	4" x 3"	5" x 4"	6"
6" x 4"
Double Combination with 2" CUP Hub Inlet
4"
Double Combination with 2" CUP Hub Inlet
Left Hand - 4"	Right Hand - 4"
Double Hub Fitting
10"	12"	15"	2"
3"	4"	5"	6"
8"
Double Hub Shorties
2" x 30"	3" x 30"	4" x 30"
Double Wye
10"	10" x 6"	10" x 8"	12"
12" x 6"	12" x 8"	15"	2"
3"	3" x 2"	4"	4" x 2"
4" x 3"	5"	6"	6" x 3"
6" x 4"	8"	8" x 4"	8" x 6"
H Branch
4"	4" x 3"
Increaser
2" x 4"	3" x 4"	4" x 5"	4" x 6"
4" x 8"	5" x 6"	6" x 8"	8" x 10"
Long 1/8 Bend
2" x 12"	3" x 12"	3" x 18"	4" x 12"
4" x 18"	6" x 18"
Long Plain Increaser
3" x 4" x 24"	4" x 5" x 30"
Long Sweep
10"	12"	15"	2"
3"	4"	5"	6"
8"
Long Sweep, Reducing
3" x 2"	4" x 3"
Long Tapped Increaser
2" x 4" x 30"
Long ¼" Bend
2" x 12"	3" x 12"	4" x 12"	4" x 16"
4" x 18"	4" x 24"
P Trap
2"	3"	4"	5"
6"	8"
P Trap with Cleanout
Left Hand - 4"	Right Hand - 4"
Reducer
10" x 4"	10" x 5"	10" x 6"	10" x 8"
12" x 10"	12" x 4"	12" x 6"	12" x 8"
15" x 10"	15" x 12"	15" x 6"	15" x 8"
3" x 2"	4" x 2"	4" x 3"	5" x 2"
5" x 3"	5" x 4"	6" x 2"	6" x 3"
6" x 4"	6" x 5"	8" x 3"	8" x 4"
8" x 5"	8" x 6"
Reducing Quarter Bend
3" x 2"	4" x 2"	4" x 3"
Running Trap
4"	6"
Running Trap with Double Hub Vent
10" x 8"	12" x 10"	15" x 12"	3" x 3"
4" x 4"	5" x 4"	6" x 4"	6" x 6"
8" x 4"	8" x 6"
Running Trap with Single Hub Vent
3" x 3"	4" x 4"	5" x 4"	6" x 4"
8" x 4"	8" x 6"
Sanitary Cross
2"	3"	3" x 2"	4"
4" x 2"	4" x 3"	5" x 4"	6"
6" x 4"	8"
Sanitary Tapped Cross
2" x 1 1/2"	2" x 2"	3" x 1 1/2"	3" x 2"
4" x 1 1/2"	4" x 2"
Sanitary Tapped Tee
2" x 1 1/2"	2" x 1 1/4"	2" x 2"	3" x 1 1/2"
3" x 2"	3" x 3"	4" x 1 1/2"	4" x 2"
4" x 3"
Sanitary Tee
10"	10" x 4"	10" x 6"	10" x 8"
12"	12" x 10"	12" x 6"	12" x 8"
15"	15" x 12"	15" x 6"	15" x 8"
2"	3"	3" x 2"	4"
4" x 2"	4" x 3"	5"	5" x 4"
6"	6" x 2"	6" x 3"	6" x 4"
8"	8" x 4"	8" x 6"
Sanitary Tee with Cleanout on Main
4"
Short Sweep
10"	12"	2"	3"
4"	5"	6"	8"
Straight Cross
4"	4" x 2"
Straight Tapped Tee
2" x 1 1/2"	2" x 2"	3" x 1 1/2"	3" x 2"
4" x 2"	4" x 3"	4" x 4"	5" x 2"
5" x 4"	6" x 4"
Straight Tee
2"	3"	3" x 2"	4"
4" x 2"	4" x 3"	5"	6"
6" x 4"	8"	8" x 4"
Tapped Closet Bend with Southern Brass Plug
3 1/2" x 4" x 4" x 1"	3 1/2" x 4" x 4" x 2"
Tapped Cross
3" x 2"	4" x 2"
Wye
10"	10" x 3"	10" x 4"	10" x 5"
10" x 6"	10" x 8"	12"	12" x 10"
12" x 4"	12" x 5"	12" x 6"	12" x 8"
15"	15" x 10"	15" x 12"	15" x 4"
15" x 8"	2"	3"	3" x 2"
4"	4" x 2"	4" x 3"	5"
5" x 2"	5" x 3"	5" x 4"	6"
6" x 2"	6" x 3"	6" x 4"	6" x 5"
8"	8" x 2"	8" x 3"	8" x 4"
8" x 5"	8" x 6"
# This facility is a member of the Cast Iron Soil Pipe Institute. * All Listed products from this facility are NSF Certified, whether or not they bear the NSF Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] High Performance Edge Coating is approved for use on these products.
Hubless Soil Pipe# § [1] [2]	Cast Iron	CHAR	CISPI 301
No-Hub Pipe In 5 Foot Nominal Lengths
2" - 6"
# This facility is a member of the Cast Iron Soil Pipe Institute. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] High Performance Edge Coating is approved for use on these products. [2] 5 foot lengths Certified in diameters of 2", 3", 4", 5", 6".
Hubless Soil Pipe# § [1] [3]	Cast Iron	CHAR	CISPI 301
No-Hub Pipe In 10 Foot Nominal Lengths
1 1/2" - 15"
# This facility is a member of the Cast Iron Soil Pipe Institute. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] High Performance Edge Coating is approved for use on these products. [3] 10 foot lengths Certified in diameters of 1 1/2", 2", 3", 4", 5", 6", 8", 10", 12", 15".
Hubless Soil# § [1]*	Cast Iron	CHAR	CISPI 301
1/16 Bend
1 1/2"	2"	3"	4"
5"	6"	8"
1/4 Bend
1 1/2"	2"	3"	4"
5"	6"	8"
1/4 Bend with Heel Inlet
3" x 2"	4" x 2"
1/4 Bend with Side Inlet
3" x 2"	4" x 2"
1/5 Bend
4"
1/6 Bend
2"	3"	4"
1/8 Bend
1 1/2"	10"	12"	15"
2"	3"	4"	5"
6"	8"
45° Vented Tub Wye
2"
Blind Plug
1 1/2"	10"	12"	15"
2"	3"	4"	5"
6"	8"
CL Fitting Dbl w/2" Inlets;A Inlet:16";B Inlet:8½"
4" x 28"
CL Fitting Dbl. w/ 2" Inlets;A Inlet:16";B Inlet:0
4" x 28"
CL Fitting Left w/ 2" Inlets; A Inlet:0; B Inlet:0
4" x 28"
CL Fitting Left w/ 2" Inlets;A Inlet:0;B Inlet:8½"
4" x 28"
CL Fitting Left w/ 2" Inlets;A Inlet:16";B Inlet:0
4" x 28"
CL Fitting Lft w/2" Inlets;A Inlet:14";B Inlet 8½"
4" x 28"
CL Fitting Lft w/2" Inlets;A Inlet:16";B Inlet 8½"
4" x 28"
CL Fitting Lft w/2" Inlets;A Inlet:23½";B Inlet8½"
4" x 28"
CL Fitting Right w/2" Inlets; A Inlet:0; B Inlet:0
4" x 28"
CL Fitting Right w/2" Inlets;A Inlet:0;B Inlet:8½"
4" x 28"
CL Fitting Right w/2" Inlets;A Inlet:16";B Inlet:0
4" x 28"
CL Fitting Rt w/2" Inlets;A Inlet 14; B Inlet:8 ½"
4" x 28"
CL Fitting Rt w/2" Inlets;A Inlet:23½";B Inlet:8½"
4" x 28"
CL Fitting Rt. w/2" Inlets;A Inlet:16";B Inlet 8½"
4" x 28"
CL Fitting w/ 2" Inlets; A Inlet: 0; B Inlet: 0
4" x 28"
CL Fitting w/ 2" Inlets; A Inlet:0; B Inlet: 8 ½"
4" x 28"
CL Fitting w/2" Inlets: A Inlet:23 ½";B Inlet 8 ½"
4" x 28"
Closet Flange, Slot & Notched
4" x 3" x 3"	4" x 3" x 8"	4" x 4" x 4"	4" x 8"
Combination
1 1/2"	2"	2" x 1 1/2"	3"
3" x 1 1/2"	3" x 2"	4"	4" x 2"
4" x 3"	5"	5" x 2"	5" x 3"
5" x 4"	6"	6" x 2"	6" x 3"
6" x 4"	6" x 5"	8"	8" x 4"
8" x 6"
Deep Seal P Trap
2"	3"	4"
Double 1/4 Bend
2"	3"	4"
Double A Inlet 0; B Inlet 0
4" x 28"
Double A Inlet 0; B Inlet 8 ½"
4" x 28"
Double A Inlet 16"; B Inlet
4" x 28"
Double A Inlet 16"; B Inlet 8"
4" x 28"
Double A Inlet 23 ½"; B Inlet 8 ½"
4" x 28"
Double Combination
2"	3"	3" x 2"	4"
4" x 2"	4" x 3"	5"	5" x 4"
6"	6" x 4"	8"	8" x 4"
8" x 6"
Extended 1/4 Bend
2" x 12"	2" x 18"	2" x 24"	3" x 12"
3" x 18"	4" x 12"
Extended Combination
2" x 24"	2" x 34"
Extended Sanitary Tapped Tee
2" x 1 1/2" x 31"	2" x 2" x 31"
Extended Short Sweep
2" x 18"	2" x 24"	2" x 34"
Extended Tapped Sanitary Tee
2" x 1 1/2"	2" x 2"
Ferrule with Southern Brass Plug Installed
2" x 1 1/2"	3" x 2 1/2"	4" x 3 1/2"	5" x 4"
6" x 5"	8" x 6"
Figure 1A, No Hub Top
2" x 1 1/2"
Figure 5, Double Fixture
3"	4"
Florida Special Upright Wye
3" x 2"	4"	4" x 2"
Horizontal Twin Sanitary Tapped Tee
3" x 1 1/2"	4" x 1 1/2"
Hub Adapter
2"	4"
Increaser-Reducer
2" x 3"	2" x 4"	3" x 4"
Iron Body Cleanout - Tapped (Ferrule Less Plug)
2"	3"	4"	5"
6"	8"
Left Hand A Inlet 0; B Inlet 0
4" x 28"
Left Hand A Inlet 0; B Inlet 8 ½"
4" x 28"
Left Hand A Inlet 14"; B Inlet 8 ½"
4" x 28"
Left Hand A Inlet 16"; B Inlet 0
4" x 28"
Left Hand A Inlet 16"; B Inlet 8 ½"
4" x 28"
Left Hand A Inlet 23 ½"; B Inlet 8 ½"
4" x 28"
Long 1/8 Bend
2" x 12"	2" x 18"	3" x 12"	3" x 18"
4" x 12"
Long P Trap
2" x 12"	2" x 18"
Long Sweep
1 1/2"	2"	3"	4"
5"	6"
P Trap
1 1/2"	2"	3"	4"
6"
P Trap with 1 1/2 Left Hand Tap Side Inlet
2" x 1 1/2"
P Trap with 1 1/2 Right Hand Tap Side Inlet
2" x 1 1/2"
P Trap with 1/2 Trap in Heel
2"	3"	4"
P Trap with 2" No Hub Side Inlet LH
2"
P Trap with 2" No Hub Side Inlet RH
2"
Prison Fixt. w/2" Top Vent &2" Ext. Side In. w/Tap
4"	4" x 3"
Prison Fixture w/2" Top Vent & 2" Ext. Side Inlet
4"	4" x 3"
Reducing 1/4 Bend
4" x 3"
Reducing Long Sweep
4" x 3"
Right Hand A Inlet 0; B Inlet 0
4" x 28"
Right Hand A Inlet 0; B Inlet 8 ½"
4" x 28"
Right Hand A Inlet 14"; B Inlet 8 ½"
4" x 28"
Right Hand A Inlet 16"; B Inlet 0
4" x 28"
Right Hand A Inlet 16"; B Inlet 8 ½"
4" x 28"
Right Hand A Inlet 23 ½"; B Inlet 8 ½"
4" x 28"
Running Trap with Double Vents
4"
Sanitary Cross
1 1/2"	2"	3"	3" x 2"
4"	4" x 2"	4" x 3"	5" x 4"
6"	6" x 4"	8"	8" x 4"
Sanitary Cross w/ 90° Side Opening Above Center
3" x 2"	4" x 2"
Sanitary Cross with 45° Side Opening Same Side
3" x 2"	4" x 2"
Sanitary Cross with Vent and 2" 45° Inlets
4" x 3"
Sanitary Cross, Tapped
1 1/2" x 1 1/2"	2" x 1 1/2"	2" x 1 1/4"	2" x 2"
3" x 1 1/2"	3" x 2"	4" x 1 1/2"	4" x 2"
5" x 1 1/2"
Sanitary Cross, Tapped (Extended)
2" x 1 1/2" x 22 7/8"	2" x 1 1/2" x 31"	2" x 2" x 22 7/8"	2" x 2" x 31"
Sanitary Tapped Tee
1 1/2" x 1 1/2"	1 1/2" x 1 1/4"	2" x 1 1/2"	2" x 1 1/4"
2" x 2"	3" x 1 1/2"	3" x 1 1/4"	3" x 2"
3" x 3"	4" x 1 1/2"	4" x 1 1/4"	4" x 2"
4" x 3"	5" x 1 1/2"	5" x 2"	6" x 1 1/2"
Sanitary Tee
1 1/2"	10"	10" x 4"	10" x 6"
10" x 8"	12"	12" x 10"	12" x 6"
12" x 8"	15"	15" x 12"	15" x 6"
15" x 8"	2"	3"	3" x 2"
4"	4" x 2"	4" x 3"	5"
5" x 4"	6"	6" x 2"	6" x 3"
6" x 4"	8"	8" x 4"	8" x 6"
Sanitary Tee w/ 45° Sanitary Opening Abv Center LH
Left Hand - 3" x 2"	Left Hand - 4" x 2"	Left and Right Hand - 3" x 2"	Right Hand - 3" x 2"
Right Hand - 4" x 2"
Sanitary Tee w/ Side Opening Above Center-Lft Hand
Left Hand - 3" x 3" x 2"	Left Hand - 4" x 4" x 2"	Left and Right Hand - 3" x 3" x 2" x 2"	Right Hand - 3" x 3" x 2"
Right Hand - 4" x 4" x 2"
Sanitary Tee with R & L Side Inlets
4" x 2"
Short Increaser-Reducer
10" x 4"	10" x 6"	10" x 8"	12" x 10"
12" x 4"	12" x 6"	12" x 8"	15" x 10"
15" x 12"	15" x 4"	15" x 6"	15" x 8"
2" x 1 1/2"	3" x 1 1/2"	3" x 2"	4" x 2"
4" x 3"	5" x 2"	5" x 3"	5" x 4"
6" x 2"	6" x 3"	6" x 4"	6" x 5"
8" x 2"	8" x 3"	8" x 4"	8" x 5"
8" x 6"
Short Sweep
10"	12"	15"	2"
3"	4"	5"	6"
8"
Single Two-Way Cleanout
4"
Tapped 1/4 Bend
1 1/2" x 1 1/2"	2" x 1 1/2"	2" x 1 1/4"	2" x 2"
Tapped Adapter
1 1/2" x 1 1/2"	2" x 1 1/2"	2" x 1 1/4"	2" x 2"
3" x 2"
Tapped P Trap
1 1/2" x 1 1/2"	2" x 1 1/2"	2" x 2"
Tapped Wye
2" x 1 1/2"	2" x 2"	3" x 1 1/2"	3" x 2"
4" x 1 1/2"	4" x 2"
Test Tee (Less Brass Plug)
10" x 10"	2" x 2"	3" x 3"	4" x 3" x 3 1/2"
4" x 4"	5" x 5"	6" x 6"	8" x 8"
Test Tee (with Southern Brass Plug Installed)
2" x 2"	3" x 3"	4" x 4"	5" x 5"
6" x 6"	8" x 8"
Two-Way Sanitary Tee
2" x 18"	2" x 24"
Upright Wye
2"	3"	3" x 2"	4"
4" x 2"	4" x 3"	5"	5" x 2"
Vent Crossover Double Inlets
2" x 18 3/8"
Vent Crossover Left Hand Inlet 6 ½" Spread
2" x 18 3/8"
Vent Crossover Right Hand Inlet 6 ½" Spread
2" x 18 3/8"
Vented Closet Cross w/ 2" Top Vent & 2" Ext. SO
4" x 4" x 2" x 2" x 4"
Vented Closet Cross with 2" Top Vent
4" x 4" x 2" x 4" x 4"
Vented Closet Tee With 2" Top Vent
Left Hand - 4" x 4" x 2" x 4"	Right Hand - 4" x 4" x 2" x 4"
Vented Closet Tee w/ 2" Top Vent & Ext. Side Open
Left Hand - 4" x 4" x 2" x 2" x 4"	Right Hand - 4" x 4" x 2" x 2" x 4"
Vented Tub Wye
2" x 15"	2" x 29 1/2"
Vented Tub Wye Extended Offset Left Hand
2"
Vented Tub Wye Extended Offset Right Hand
2"
Vertical Sanitary Tapped Tee
2" x 1 1/2"
Wye
1 1/2"	10"	10" x 3"	10" x 4"
10" x 5"	10" x 6"	10" x 8"	12"
12" x 10"	12" x 4"	12" x 5"	12" x 6"
12" x 8"	15"	15" x 10"	15" x 12"
15" x 4"	15" x 8"	2"	3"
3" x 2"	4"	4" x 2"	4" x 3"
5"	5" x 2"	5" x 3"	5" x 4"
6"	6" x 2"	6" x 3"	6" x 4"
6" x 5"	8"	8" x 2"	8" x 3"
8" x 4"	8" x 5"	8" x 6"
# This facility is a member of the Cast Iron Soil Pipe Institute. * All Listed products from this facility are NSF Certified, whether or not they bear the NSF Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] High Performance Edge Coating is approved for use on these products.
Hub/Spigot Soil Pipe EH & SV# §	Cast Iron	Charlotte Pipe	ASTM A74
Double Hub In 5 foot nominal lengths
2"	3"	4"	5"
6"
In 5 and 10 foot nominal lengths
10"	12"	15"	2"
3"	4"	5"	6"
8"
Single Hub
10" x 30"	12" x 30"	15" x 30"	8" x 30"
# This facility is a member of the Cast Iron Soil Pipe Institute. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Hub/Spigot Soil Fittings EH# § [1]*	Cast Iron	Charlotte Pipe	ASTM A74
1/16 Bend
10"	12"	15"	2"
3"	4"	5"	6"
8"
1/4 Bend
10"	12"	15"	2"
3"	4"	5"	6"
8"
1/6 Bend
2"	3"	4"	6"
1/8 Bend
10"	12"	15"	2"
3"	4"	5"	6"
8"
Blind Plug (Pipe Plug)
10"	12"	15"	2"
3"	4"	5"	6"
8"
Cleanout Tee with Southern Brass Plug
3"	4"	5"	6"
Combination
2"	3"	3" x 2"	4"
4" x 2"	4" x 3"	5"	5" x 4"
6"	6" x 2"	6" x 3"	6" x 4"
6" x 5"	8"	8" x 4"	8" x 6"
Deep Seal P Trap
2"	3"	4"
Double Combination
4"	6" x 4"
Double Hub Fitting
10"	12"	15"	2"
3"	4"	5"	6"
8"
Double Hub Shorties
2" x 30"	3" x 30"	4" x 30"
Double Wye
10"	12"	15"	2"
3"	4"	4" x 3"	6"
6" x 4"	8"
Increaser
4" x 6"	6" x 8"
Iron Body Cleanout Ferrules
10"	12"	15"	2"
3	4"	5"	6"
8"
Long 1/8 Bend
2" x 18"	3" x 18"	4" x 18"
Long Sweep
10"	12"	15"	2"
3"	4"	5"	6"
8"
P Trap
2"	3"	4"	5"
6"	8"
Reducer
10" x 4"	10" x 6"	10" x 8"	12" x 10"
12" x 4"	12" x 6"	12" x 8"	15" x 10"
15" x 12"	15" x 8"	3" x 2"	4" x 2"
4" x 3"	5" x 3"	5" x 4"	6" x 3"
6" x 4"	6" x 5"	8" x 4"	8" x 5"
8" x 6"
Running Trap with Double Hub Vent
10" x 8"	12" x 6"	3" x 3"	4" x 4"
5" x 4"	6" x 4"	6" x 6"	8" x 4"
8" x 6"
Running Trap with Single Hub Vent
3" x 3"	4" x 4"	5" x 4"	6" x 4"
Sanitary Cross
4"
Sanitary Tapped Tee
2" x 1 1/2"	2" x 2"	3" x 2"	4" x 2"
Sanitary Tee
10"	10" x 6"	10" x 8"	12"
12" x 8"	15"	15" x 8"	2"
3"	3" x 2"	4"	4" x 2"
4" x 3"	5"	6"	6" x 3"
6" x 4"	8"	8" x 4"	8" x 6"
Short Sweep
10"	12"	2"	3"
4"	5"	6"	8"
Straight Tee
4" x 2"
Tapped Tee
3" x 2"	4" x 2"	4" x 3"	5" x 4"
6" x 4"
Wye
10"	10" x 3"	10" x 4"	10" x 5"
10" x 6"	10" x 8"	12"	12" x 10"
12" x 4"	12" x 5"	12" x 6"	12" x 8"
15"	15" x 10",	15" x 12"	15" x 4"
15" x 8"	2"	3"	3" x 2"
4"	4" x 2"	4" x 3"	5"
5" x 2"	5" x 3"	5" x 4"	6"
6" x 2"	6" x 3"	6" x 4"	6" x 5"
8"	8" x 2"	8" x 3"	8" x 4"
8" x 5"	8" x 6"
# This facility is a member of the Cast Iron Soil Pipe Institute. * All Listed products from this facility are NSF Certified, whether or not they bear the NSF Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] High Performance Edge Coating is approved for use on these products.
Hub/Spigot Soil Fittings SV# § [1]*	Cast Iron	Charlotte Pipe	ASTM A74
1/16 Bend
10"	12"	15"	2"
3"	4"	5"	6"
8"
1/4 Bend
10"	12"	15"	2"
3"	4"	5"	6"
8"
1/4 Bend with High Heel Inlet
4" x 2"
1/4 Bend with Low Heel Inlet
3" x 2"	4" x 2"
1/5 Bend
3"	4"
1/6 Bend
2"	3"	4"	5"
6"	8"
1/8 Bend
10"	12"	15"	2"
3"	4"	5"	6"
8"
Blind Plug (Pipe Plug)
10"	12"	15"	2"
3"	4"	5"	6"
8"
Cleanout Ferrules
10"	12"	15"	2"
3"	4"	5"	6"
8"
Cleanout Tee with Southern Plug
12"	2"	3"	4"
5"	6"
Closet Bend
3" x 16" x 16"
Closet Bend
3" x 4" x 10" x 16"
Closet Bend
3" x 4" x 12" x 12"	3" x 4" x 16" x 16"	3" x 4" x 18" x 18"	3" x 4" x 6" x 12"
3" x 4" x 6" x 16"	3" x 4" x 8" x 18"	4" x 10" x 12"	4" x 10" x 16"
4" x 12" x 12"	4" x 12" x 16"	4" x 12" x 18"
Closet Bend
4" x 14" x 16"
Closet Bend
4" x 14" x 18"	4" x 16" x 16"
Closet Bend
4" x 16" x 18"
Closet Bend
4" x 18" x 18"	4" x 4" x 12"	4" x 4" x 16"	4" x 4" x 18
4" x 6" x 12"	4" x 6" x 16"	4" x 6" x 18"	4" x 8" x 16"
4" x 8" x 18"
Closet Bend with 1 1/2 Tapped
Left - 4" x 16" x 16"	Right - 4" x 16" x 16"	Right and Left Hand - 4" x 16" x 16"	Right and Left Hand - 4" x 6" x 16"
Combination
2"	3"	3" x 2"	4"
4" x 2"	4" x 3"	5"	5" x 2"
5" x 4"	6"	6" x 2"	6" x 3"
6" x 4"	6" x 5"	8"	8" x 2"
8" x 4"	8" x 5"	8" x 6"
Deep Seal P Trap
2"	3"	4"	6"
Double Combination
2"	3"	3" x 2"	4"
4" x 2"	4" x 3"	5" x 4"	6"
6" x 4"
Double Combination with 2" CUP Hub Inlet
4"
Double Combination with 2" CUP Hub Inlet
Left Hand - 4"	Right Hand - 4"
Double Hub Fitting
10"	12"	15"	2"
3"	4"	5"	6"
8"
Double Hub Shorties
2" x 30"	3" x 30"	4" x 30"
Double Wye
10"	10" x 6"	10" x 8"	12"
12" x 6"	12" x 8"	15"	2"
3"	3" x 2"	4"	4" x 2"
4" x 3"	5"	6"	6" x 3"
6" x 4"	8"	8" x 4"	8" x 6"
H Branch
4"	4" x 3"
Increaser
2" x 4"	3" x 4"	4" x 5"	4" x 6"
4" x 8"	5" x 6"	6" x 8"	8" x 10"
Long 1/8 Bend
2" x 12"	3" x 12"	3" x 18"	4" x 12"
4" x 18"	6" x 18"
Long Plain Increaser
3" x 4" x 24"	4" x 5" x 30"
Long Sweep
10"	12"	15"	2"
3"	4"	5"	6"
8"
Long Sweep, Reducing
3" x 2"	4" x 3"
Long Tapped Increaser
2" x 4" x 30"
Long ¼" Bend
2" x 12"	3" x 12"	4" x 12"	4" x 16"
4" x 18"	4" x 24"
P Trap
2"	3"	4"	5"
6"	8"
P Trap with Cleanout
Left Hand - 4"	Right Hand - 4"
Reducer
10" x 4"	10" x 5"	10" x 6"	10" x 8"
12" x 10"	12" x 4"	12" x 6"	12" x 8"
15" x 10"	15" x 12"	15" x 6"	15" x 8"
3" x 2"	4" x 2"	4" x 3"	5" x 2"
5" x 3"	5" x 4"	6" x 2"	6" x 3"
6" x 4"	6" x 5"	8" x 3"	8" x 4"
8" x 5"	8" x 6"
Reducing Quarter Bend
3" x 2"	4" x 2"	4" x 3"
Running Trap
4"	6"
Running Trap with Double Hub Vent
10" x 8"	12" x 10"	15" x 12"	3" x 3"
4" x 4"	5" x 4"	6" x 4"	6" x 6"
8" x 4"	8" x 6"
Running Trap with Single Hub Vent
3" x 3"	4" x 4"	5" x 4"	6" x 4"
8" x 4"	8" x 6"
Sanitary Cross
2"	3"	3" x 2"	4"
4" x 2"	4" x 3"	5" x 4"	6"
6" x 4"	8"
Sanitary Tapped Cross
2" x 1 1/2"	2" x 2"	3" x 1 1/2"	3" x 2"
4" x 1 1/2"	4" x 2"
Sanitary Tapped Tee
2" x 1 1/2"	2" x 1 1/4"	2" x 2"	3" x 1 1/2"
3" x 2"	3" x 3"	4" x 1 1/2"	4" x 2"
4" x 3"
Sanitary Tee
10"	10" x 4"	10" x 6"	10" x 8"
12"	12" x 10"	12" x 6"	12" x 8"
15"	15" x 12"	15" x 6"	15" x 8"
2"	3"	3" x 2"	4"
4" x 2"	4" x 3"	5"	5" x 4"
6"	6" x 2"	6" x 3"	6" x 4"
8"	8" x 4"	8" x 6"
Sanitary Tee with Cleanout on Main
4"
Short Sweep
10"	12"	2"	3"
4"	5"	6"	8"
Straight Cross
4"	4" x 2"
Straight Tapped Tee
2" x 1 1/2"	2" x 2"	3" x 1 1/2"	3" x 2"
4" x 2"	4" x 3"	4" x 4"	5" x 2"
5" x 4"	6" x 4"
Straight Tee
2"	3"	3" x 2"	4"
4" x 2"	4" x 3"	5"	6"
6" x 4"	8"	8" x 4"
Tapped Closet Bend with Southern Brass Plug
3 1/2" x 4" x 4" x 1"	3 1/2" x 4" x 4" x 2"
Tapped Cross
3" x 2"	4" x 2"
Wye
10"	10" x 3"	10" x 4"	10" x 5"
10" x 6"	10" x 8"	12"	12" x 10"
12" x 4"	12" x 5"	12" x 6"	12" x 8"
15"	15" x 10"	15" x 12"	15" x 4"
15" x 8"	2"	3"	3" x 2"
4"	4" x 2"	4" x 3"	5"
5" x 2"	5" x 3"	5" x 4"	6"
6" x 2"	6" x 3"	6" x 4"	6" x 5"
8"	8" x 2"	8" x 3"	8" x 4"
8" x 5"	8" x 6"
# This facility is a member of the Cast Iron Soil Pipe Institute. * All Listed products from this facility are NSF Certified, whether or not they bear the NSF Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] High Performance Edge Coating is approved for use on these products.
Hubless Soil Pipe# § [1]	Cast Iron	Charlotte Pipe	CISPI 301
No-Hub Pipe In 10 Foot Nominal Lengths
1 1/2"	10"	12"	15"
2"	3"	4"	5"
6"	8"
# This facility is a member of the Cast Iron Soil Pipe Institute. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] High Performance Edge Coating is approved for use on these products.
Hubless Soil Fittings# § [1]*	Cast Iron	Charlotte Pipe	CISPI 301
1/16 Bend
1 1/2"	2"	3"	4"
5"	6"	8"
1/4 Bend
1 1/2"	2"	3"	4"
5"	6"	8"
1/4 Bend with Heel Inlet
3" x 2"	4" x 2"
1/4 Bend with Side Inlet
3" x 2"	4" x 2"
1/5 Bend
4"
1/6 Bend
2"	3"	4"
1/8 Bend
1 1/2"	10"	12"	15"
2"	3"	4"	5"
6"	8"
45° Vented Tub Wye
2"
Blind Plug
1 1/2"	10"	12"	15"
2"	3"	4"	5"
6"	8"
CL Fitting Dbl w/2" Inlets;A Inlet:16";B Inlet:8½"
4" x 28"
CL Fitting Dbl. w/ 2" Inlets;A Inlet:16";B Inlet:0
4" x 28"
CL Fitting Left w/ 2" Inlets; A Inlet:0; B Inlet:0
4" x 28"
CL Fitting Left w/ 2" Inlets;A Inlet:0;B Inlet:8½"
4" x 28"
CL Fitting Left w/ 2" Inlets;A Inlet:16";B Inlet:0
4" x 28"
CL Fitting Lft w/2" Inlets;A Inlet:14";B Inlet 8½"
4" x 28"
CL Fitting Lft w/2" Inlets;A Inlet:16";B Inlet 8½"
4" x 28"
CL Fitting Lft w/2" Inlets;A Inlet:23½";B Inlet8½"
4" x 28"
CL Fitting Right w/2" Inlets; A Inlet:0; B Inlet:0
4" x 28"
CL Fitting Right w/2" Inlets;A Inlet:0;B Inlet:8½"
4" x 28"
CL Fitting Right w/2" Inlets;A Inlet:16";B Inlet:0
4" x 28"
CL Fitting Rt w/2" Inlets;A Inlet 14; B Inlet:8 ½"
4" x 28"
CL Fitting Rt w/2" Inlets;A Inlet:23½";B Inlet:8½"
4" x 28"
CL Fitting Rt. w/2" Inlets;A Inlet:16";B Inlet 8½"
4" x 28"
CL Fitting w/ 2" Inlets; A Inlet: 0; B Inlet: 0
4" x 28"
CL Fitting w/ 2" Inlets; A Inlet:0; B Inlet: 8 ½"
4" x 28"
CL Fitting w/2" Inlets: A Inlet:23 ½";B Inlet 8 ½"
4" x 28"
Closet Flange, Slot & Notched
4" x 3" x 3"	4" x 3" x 8"	4" x 4" x 4"	4" x 8"
Combination
1 1/2"	2"	2" x 1 1/2"	3"
3" x 1 1/2"	3" x 2"	4"	4" x 2"
4" x 3"	5"	5" x 2"	5" x 3"
5" x 4"	6"	6" x 2"	6" x 3"
6" x 4"	6" x 5"	8"	8" x 4"
8" x 6"
Deep Seal P Trap
2"	3"	4"
Double 1/4 Bend
2"	3"	4"
Double A Inlet 0; B Inlet 0
4" x 28"
Double A Inlet 0; B Inlet 8 ½"
4" x 28"
Double A Inlet 16"; B Inlet
4" x 28"
Double A Inlet 16"; B Inlet 8"
4" x 28"
Double A Inlet 23 ½"; B Inlet 8 ½"
4" x 28"
Double Combination
2"	3"	3" x 2"	4"
4" x 2"	4" x 3"
Double Tapped Wye
2" x 1 1/2"
Double Wye
2"	3"	3" x 2"	4"
4" x 2"	4" x 3"	5"	5" x 4"
6"	6" x 4"	8"	8" x 4"
8" x 6"
Extended 1/4 Bend
2" x 12"	2" x 18"	2" x 24"	3" x 12"
3" x 18"	4" x 12"
Extended Combination
2" x 24"	2" x 34"
Extended Sanitary Tapped Tee
2" x 1 1/2" x 31"	2" x 2" x 31"
Extended Short Sweep
2" x 18"	2" x 24"	2" x 34"
Extended Tapped Sanitary Tee
2" x 1 1/2"	2" x 2"
Ferrule with Southern Brass Plug Installed
2" x 1 1/2"	3" x 2 1/2"	4" x 3 1/2"	5" x 4"
6" x 5"	8" x 6"
Figure 1A, No Hub Top
2" x 1 1/2"
Figure 5, Double Fixture
3"	4"
Florida Special Upright Wye
3" x 2"	4"	4" x 2"
Horizontal Twin Sanitary Tapped Tee
3" x 1 1/2"	4" x 1 1/2"
Hub Adapter
2"	4"
Increaser-Reducer
2" x 3"	2" x 4"	3" x 4"
Iron Body Cleanout - Tapped (Ferrule Less Plug)
2"	3"	4"	5"
6"	8"
Left Hand A Inlet 0; B Inlet 0
4" x 28"
Left Hand A Inlet 0; B Inlet 8 ½"
4" x 28"
Left Hand A Inlet 14"; B Inlet 8 ½"
4" x 28"
Left Hand A Inlet 16"; B Inlet 0
4" x 28"
Left Hand A Inlet 16"; B Inlet 8 ½"
4" x 28"
Left Hand A Inlet 23 ½"; B Inlet 8 ½"
4" x 28"
Long 1/8 Bend
2" x 12"	2" x 18"	3" x 12"	3" x 18"
4" x 12"
Long P Trap
2" x 12"	2" x 18"
Long Sweep
1 1/2"	2"	3"	4"
5"	6"
P Trap
1 1/2"	2"	3"	4"
6"
P Trap with 1 1/2 Left Hand Tap Side Inlet
2" x 1 1/2"
P Trap with 1 1/2 Right Hand Tap Side Inlet
2" x 1 1/2"
P Trap with 1/2 Trap in Heel
2"	3"	4"
P Trap with 2" No Hub Side Inlet LH
2"
P Trap with 2" No Hub Side Inlet RH
2"
Prison Fixt. w/2" Top Vent &2" Ext. Side In. w/Tap
4"	4" x 3"
Prison Fixture w/2" Top Vent & 2" Ext. Side Inlet
4"	4" x 3"
Reducing 1/4 Bend
4" x 3"
Reducing Long Sweep
4" x 3"
Right Hand A Inlet 0; B Inlet 0
4" x 28"
Right Hand A Inlet 0; B Inlet 8 ½"
4" x 28"
Right Hand A Inlet 14"; B Inlet 8 ½"
4" x 28"
Right Hand A Inlet 16"; B Inlet 0
4" x 28"
Right Hand A Inlet 16"; B Inlet 8 ½"
4" x 28"
Right Hand A Inlet 23 ½"; B Inlet 8 ½"
4" x 28"
Running Trap with Double Vents
4"
Sanitary Cross
1 1/2"	2"	3"	3" x 2"
4"	4" x 2"	4" x 3"	5" x 4"
6"	6" x 4"	8"	8" x 4"
Sanitary Cross w/ 90° Side Opening Above Center
3" x 2"	4" x 2"
Sanitary Cross with 45° Side Opening Same Side
3" x 2"	4" x 2"
Sanitary Cross with Vent and 2" 45° Inlets
4" x 3"
Sanitary Cross, Tapped
1 1/2" x 1 1/2"	2" x 1 1/2"	2" x 1 1/4"	2" x 2"
3" x 1 1/2"	3" x 2"	4" x 1 1/2"	4" x 2"
5" x 1 1/2"
Sanitary Cross, Tapped (Extended)
2" x 1 1/2" x 22 7/8"	2" x 1 1/2" x 31"	2" x 2" x 22 7/8"	2" x 2" x 31"
Sanitary Tapped Tee
1 1/2" x 1 1/2"	1 1/2" x 1 1/4"	2" x 1 1/2"	2" x 1 1/4"
2" x 2"	3" x 1 1/2"	3" x 1 1/4"	3" x 2"
3" x 3"	4" x 1 1/2"	4" x 1 1/4"	4" x 2"
4" x 3"	5" x 1 1/2"	5" x 2"	6" x 1 1/2"
Sanitary Tee
1 1/2"	10"	10" x 4"	10" x 6"
10" x 8"	12"	12" x 10"	12" x 6"
12" x 8"	15"	15" x 12"	15" x 6"
15" x 8"	2"	3"	3" x 2"
4"	4" x 2"	4" x 3"	5"
5" x 4"	6"	6" x 2"	6" x 3"
6" x 4"	8"	8" x 4"	8" x 6"
Sanitary Tee w/ 45° Sanitary Opening Abv Center LH
Left Hand - 3" x 2"	Left Hand - 4" x 2"	Left and Right Hand - 3" x 2"	Right Hand - 3" x 2"
Right Hand - 4" x 2"
Sanitary Tee w/ Side Opening Above Center-LH
Left Hand - 3" x 3" x 2"	Left Hand - 4" x 4" x 2"	Left and Right Hand - 3" x 3" x 2" x 2"	Right Hand - 3" x 3" x 2"
Right Hand - 4" x 4" x 2"
Sanitary Tee with R & L Side Inlets
4" x 2"
Short Increaser-Reducer
10" x 4"	10" x 6"	10" x 8"	12" x 10"
12" x 4"	12" x 6"	12" x 8"	15" x 10"
15" x 12"	15" x 4"	15" x 6"	15" x 8"
2" x 1 1/2"	3" x 1 1/2"	3" x 2"	4" x 2"
4" x 3"	5" x 2"	5" x 3"	5" x 4"
6" x 2"	6" x 3"	6" x 4"	6" x 5"
8" x 2"	8" x 3"	8" x 4"	8" x 5"
8" x 6"
Short Sweep
10"	12"	15"	2"
3"	4"	5"	6"
8"
Single Two-Way Cleanout
4"
Tapped 1/4 Bend
1 1/2" x 1 1/2"	2" x 1 1/2"	2" x 1 1/4"	2" x 2"
Tapped Adapter
1 1/2" x 1 1/2"	2" x 1 1/2"	2" x 1 1/4"	2" x 2"
3" x 2"
Tapped P Trap
1 1/2" x 1 1/2"	2" x 1 1/2"	2" x 2"
Tapped Wye
2" x 1 1/2"	2" x 2"	3" x 1 1/2"	3" x 2"
4" x 1 1/2"	4" x 2"
Test Tee (Less Brass Plug)
10" x 10"	2" x 2"	3" x 3"	4" x 3" x 3 1/2"
4" x 4"	5" x 5"	6" x 6"	8" x 8"
Test Tee (with Southern Brass Plug Installed)
2" x 2"	3" x 3"	4" x 4"	5" x 5"
6" x 6"	8" x 8"
Two-Way Sanitary Tee
2" x 18"	2" x 24"
Upright Wye
2"	3"	3" x 2"	4"
4" x 2"	4" x 3"	5"	5" x 2"
Vent Crossover Double Inlets
2" x 18 3/8"
Vent Crossover Left Hand Inlet 6 ½" Spread
2" x 18 3/8"
Vent Crossover Right Hand Inlet 6 ½" Spread
2" x 18 3/8"
Vented Closet Cross w/ 2" Top Vent & 2" Ext. SO
4" x 4" x 2" x 2" x 4"
Vented Closet Cross with 2" Top Vent
4" x 4" x 2" x 4" x 4"
Vented Closet Tee With 2" Top Vent
Left Hand - 4" x 4" x 2" x 4"	Right Hand - 4" x 4" x 2" x 4"
Vented Closet Tee w/ 2" Top Vent & Ext. Side Open
Left Hand - 4" x 4" x 2" x 2" x 4"	Right Hand - 4" x 4" x 2" x 2" x 4"
Vented Tub Wye
2" x 15"	2" x 29 1/2"
Vented Tub Wye Extended Offset Left Hand
2"
Vented Tub Wye Extended Offset Right Hand
2"
Vertical Sanitary Tapped Tee
2" x 1 1/2"
Wye
1 1/2"	10"	10" x 3"	10" x 4"
10" x 5"	10" x 6"	10" x 8"	12"
12" x 10"	12" x 4"	12" x 5"	12" x 6"
12" x 8"	15"	15" x 10"	15" x 12"
15" x 4"	15" x 8"	2"	3"
3" x 2"	4"	4" x 2"	4" x 3"
5"	5" x 2"	5" x 3"	5" x 4"
6"	6" x 2"	6" x 3"	6" x 4"
6" x 5"	8"	8" x 2"	8" x 3"
8" x 4"	8" x 5"	8" x 6"
# This facility is a member of the Cast Iron Soil Pipe Institute. * All Listed products from this facility are NSF Certified, whether or not they bear the NSF Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] High Performance Edge Coating is approved for use on these products.

Facility : CISPI Member - Tyler Pipe, USA

Product Type	Material Type	Trade Name	Product Standard
Hub/Spigot Soil Pipe Service# §	Cast Iron	AB&I	ASTM A74
Single Hub In 10 Foot Nominal Lengths
3"	4"	6"
# This facility is a member of the Cast Iron Soil Pipe Institute. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Hub/Spigot Soil Fittings SV# §*	Cast Iron	AB&I	ASTM A74
1/16 Bend
4"
1/4 Bend
2"	3"	4"	6"
1/8 Bend
2"	3"	4"	6"
Combination Wye
2"	3"	3" x 2"	4"
4" x 2"	4" x 3"	6"	6" x 3"
6" x 4"
Long Sweep
2"	4"
P Trap
2"	3"	4"	6"
P Trap with 1/2" Tap
2"
Reducer
10" x 8"
Sanitary Tee
2"	4"	4" x 2"
Short Sweep
2"	3"	4"	6"
Wye
2"	3"	3" x 2"	4"
4" x 2"	4" x 3"	6" x 3"	6" x 4"
# This facility is a member of the Cast Iron Soil Pipe Institute. * All Listed products from this facility are NSF Certified, whether or not they bear the NSF Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Hubless Soil Pipe# §	Cast Iron	AB&I	CISPI 301
No-Hub Pipe In 10 Foot Nominal Lengths
1 1/2"	2"	3"	4"
5"	6"	8"	10"
12"	15"
# This facility is a member of the Cast Iron Soil Pipe Institute. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Hubless Soil Fittings# §*	Cast Iron	AB&I	CISPI 301
1/16 Bend
2"	3"	4"	5"
6"	8"
1/4 Bend
1 1/2"	2"	3"	4"
5"	6"	8"
1/4 Bend with Extended Low Heel
3" x 2"
1/4 Bend with Low Heel
3" x 2"	4" x 2"
1/5 Bend
2"	4"
1/6 Bend
2"	3"	4"
1/8 Bend
1 1/2"	2"	3"	4"
5"	6"	8"	10"
12"
Best Set Closet Ring
4" x 2"	4" x 4"
Best Set Reducing Closet
4" x 3"
Best Set with Test Cap
4" x 2"	4" x 4"
Blind Plug (Cleanout Plug)
1 1/2"	2"	3"	4"
5"	6"	8"	10"
12"	15"
Closet Bend
3" x 4" x 6" x 12"	3" x 4" x 6" x 15"	3" x 4" x 6" x 18"	3" x 4" x 10" x 12"
3" x 4" x 10" x 15"	3" x 4" x 10" x 18"	3" x 4" x 16" x 16"	4" x 6" x 12"
4" x 6" x 15"	4" x 6" x 18"	4" x 10" x 12"	4" x 10" x 15"
4" x 10" x 15"	4" x 12" x 18"	4" x 12" x 18"
Closet Flange Closet Ring S&N with Hole
4" x 2"	4" x 4"
Closet Flange Riser (Closet Ring)
4" x 3" x 3 1/2"	4" x 4"
Combination Wye
2"	3"	3" x 2"	4"
4" x 2"	4" x 3"	5"	5" x 3"
5" x 4"	6"	6" x 2"	6" x 3"
6" x 4"	6" x 5"	8" x 4"	8" x 6"
Deep Seal P Trap
4"
Double 1/4 Bend
2"
Double Combination
3"	4"	4" x 2"	4" x 3"
Double Wye
2"	4"	4" x 2"	6"
6" x 4"
Extended 1/8 Bend
2" x 6"	2" x 18"
Figure 1A
2" x 2" x 1 1/2" x 1 1/2"
Figure 5
3" x 2"	3" x 2"	3" x 3"	4" x 2"
4" x 4"
Figure 5, Extended
3" x 2"
Figure 6
Right Hand - 3" x 2"	Right Hand - 4" x 2"	Left Hand - 3" x 2"	Left Hand - 4" x 2"
Double - 3" x 2"	Double - 4" x 2"
Figure 6 Extended
Right Hand - 3" x 2"	Right Hand - 4" x 2"	Left Hand - 3" x 2"	Left Hand - 4" x 2"
Double - 4" x 2"
Figure 8
Right Hand - 3" x 2"	Right Hand - 4" x 2"	Left Hand - 3" x 2"	Left Hand - 4" x 2"
Double - 3" x 2"	Double - 4" x 2"
Figure 8 Extended
Right Hand - 4" x 2"	Left Hand - 4" x 2"	Double - 4" x 2"
Iron Body Cleanout
2" x 1 1/2"	2" x 1 1/2"	4"	5" x 4"
6" x 5"	8" x 6"
Long Sweep
1 1/2"	2"	3"	4"
5"	6"
N Closet Ring
4" x 2"	4" x 4"
Offset Closet Ring
4" x 2"
P Trap
1 1/2"	2"	3"	4"
6"
P Trap with ½ Tapped Primer
2"	3"	4"
Prison Fitting
Double Vertical 90° Stack Fitting with 2" Vent - 4"
Reducer
2" x 1 1/2"	3" x 2"	4" x 2"	4" x 3"
5" x 4"	6" x 2"	6" x 4"	6" x 5"
8" x 2"	8" x 5"	8" x 6"	10" x 4"
10" x 6"	10" x 8"	12" x 4"	12" x 6"
12" x 8"	12" x 10"	15" x 4"	15" x 6"
15" x 8"	15" x 10"	15" x 12"
Running Trap with 1 Vent
4"
Sanitary Cross
2"	3"	3" x 2"	4"
4" x 2"
Sanitary Cross, Tapped
2" x 1 1/2"	3" x 2"	4" x 2"
Sanitary Tapped Tee
1 1/2" x 1 1/2"	2" x 1 1/2"	2" x 2"	3" x 2"
3" x 3"
Sanitary Tee
1 1/2"	2"	2" x 1 1/2"	3"
3" x 2"	4"	4" x 2"	4" x 3"
5"	5" x 3"	6" x 2"	6" x 4"
8"	8" x 3"	8" x 4"	8" x 5"
8" x 6"
Short Sweep
2"	3"	4"	5"
6"	8"	10"
Tapped 1/4 Bend
2" x 1 1/2"
Tapped Adapter
2" x 1 1/2"	2" x 2"
Tapped P Trap
2" x 1 1/2"	2" x 2"
Tapped Portland Closet Ring
4" x 2"	4" x 4"
Test Tee
2" x 2"	3" x 3"	4" x 4"	5" x 5"
6" x 6"	8" x 8"
Twin Cleanout
4" x 4" x 4"
Two-Way Cleanout
3" x 3" x 4"	4" x 3" x 4"	4" x 4" x 4"
Upright Wye
2"	3"	3" x 2"	4"
4" x 2"	4" x 3"
Vent Bypass Fittings
Left Hand Bypass A - 2"	Plain - 2"	Right Hand Bypass B - 2"	Vent Double Bypass AB - 2"
Wye
1 1/2"	2"	3"	3" x 2"
4"	4" x 2"	4" x 3"	5"
5" x 3"	6"	6" x 2"	6" x 3"
6" x 4"	6" x 5"	8"	8" x 2"
8" x 4"	8" x 5"	8" x 6"	10"
10" x 8"
# This facility is a member of the Cast Iron Soil Pipe Institute. * All Listed products from this facility are NSF Certified, whether or not they bear the NSF Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Hub/Spigot Soil Pipe Service# §	Cast Iron	Tyler Pipe	ASTM A74
Double Hub
2" x 30"	3" x 30"	4" x 30"
In 3.5 Foot Nominal Lengths
2"	3"	4"	6"
8"	10"	12"	15"
In 5 and 10 Foot Nominal Lengths
2"	3"	4"	5"
6"	8"	10"	12"
15"
Single Hub
8" x 30"	10" x 30"
# This facility is a member of the Cast Iron Soil Pipe Institute. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Hub/Spigot Soil Fittings SV# §*	Cast Iron	Tyler Pipe	ASTM A74
-45° Offset Fitting
4" x 4"	4" x 6"	4" x 8"
1/16 Bend
2"	3"	4"	5"
6"	8"	10"	12"
15"
1/4 Bend
2"	3"	4"	5"
6"	8"	10"	12"
15"
1/4 Bend with 2" High Heel Inlet
4"
1/4 Bend with 2" Low Heel Inlet
3"	4"
1/4 Bend with 2" Side Outlet
Right Hand - 4"	Left Hand - 4"
1/5 Bend
4"
1/6 Bend
2"	3"	4"	5"
6"	8"	10"
1/8 Bend
2"	3"	4"	5"
6"	8"	10"	12"
15"
Adapter
2" x 2"	3" x 3"	4" x 4"
Cleanout
2" with 1 1/2" brass plug	3" with 2 1/2" brass plug	4" with 3" brass plug	5" with 4" brass plug
6" with 5" brass plug	8" with 6" brass plug	10" with 6" brass plug	12" with 6" brass plug
15" with 6" brass plug
Cleanout Taylor-Memphis
4" x 4"
Cleanout, Body
2" with 1 1/2" IPS	3" with 2 1/2" IPS	4" with 3" IPS	4" with 3" IPS
5" with 4" IPS	6" with 5" IPS	8" with 6" IPS	10" with 6" IPS
12" with 6" IPS	15" with 6" IPS
Closet Bend
4" x 6" x 16" x 1 1/2"(T2)	4" x 6" x 16" x 2"(T2)	4" x 6" x 16" x 1 1/2 (T4)	4" x 6" x 16" x 2"(T4)
4" x 6" x 24" x 1 1/2"(T2)	4" x 6" x 24" x 2"(T2)	4" x 6" x 24"	4" x 16" x 16" x 1 1/2"(T2)
4" x 16" x 16" x 1 1/2"(T4)	4" x 16" x 16" x 2"(T4)	4" x 16" x 16" x 1 1/2"(Y2)	4" x 16" x 16" x 2"(Y2)
3" x 16" x 16"	4" x 4" x 12"	4" x 4" x 14"	4" x 4" x 16"
4" x 4" x 18"	4" x 6" x 12"	4" x 6" x 15"	4" x 6" x 16"
4" x 6" x 18"	4" x 8" x 12"	4" x 8" x 16"	4" x 10" x 12"
4" x 10" x 16"	4" x 10" x 18"	4" x 12" x 12"	4" x 12" x 14"
4" x 12" x 16"	4" x 12" x 18"	4" x 14" x 16"	4" x 14" x 18"
4" x 16" x 16"	4" x 16" x 18"	4" x 18" x 18"	4" x 3" x 6" x 12"
4" x 3" x 6" x 15"	4" x 3" x 6" x 18"	4" x 3" x 8" x 16"	4" x 3" x 10" x 12"
4" x 3" x 10" x 15"	4" x 3" x 12" x 12"	4" x 3" x 12" x 18"	4" x 3" x 16" x 16"
4" x 3" x 18" x 18"	4" x 12"	4" x 14"	4" x 16"
4" x 18"	4" x 3" x 16"
Closet Flange
4" x 1"	4" x 1 1/2"	4" x 2"	4" x 2 1/2"
4" x 3"	4" x 4"	4" x 5"	4" x 6"
Closet Flange with 1/4" Tap - Portland
4" x 2"	4" x 4"
Combination Wye
2"	3"	3" x 2"	4"
4" x 2"	4" x 3"	5"	5" x 2"
5" x 3"	5" x 4"	6"	6" x 2"
6" x 3"	6" x 4"	6" x 5"	8"
8" x 2"	8" x 4"	8" x 5"	8" x 6"
Combination Wye with 2" Side Outlet
Right Hand - 4"	Left Hand - 4"
Combination with 2" Side Outlet
Right Hand - 4"	Left Hand - 4"
Cross, Waste with 4 - 2" 45° Taps
4"
Deep Seal P Trap
2"	3"	4"	6"
Double Combination
2"	3" x 2"	3"	4" x 2"
4" x 3"	4"	5" x 4"	6" x 4"
6"
Double Combination Wye with 2" Side Outlet
4"
Double Combination with 2" Side Outlet
4"
Double Hub Fitting
2"	3"	4"	5"
6"	8"	10"	12"
15"
Double Short Turn Combination
4"
Double Tapped Wye
4" x 2"
Double Wye
2"	3"	3" x 2"	4"
4" x 2"	4" x 3"	5"	6"
6" x 3"	6" x 4"	8"	8" x 4"
8" x 6"	10"	10" x 6"	10" x 8"
12"	12" x 8"	15"
Extended Cleanout, Body
4" x 8" with 3 1/2" IPS	4" x 12" with 3 1/2" IPS
H Branch Fitting
2"	3"	3" x 2"	4"
4" x 3"
Increaser
2" x 4"	3" x 4"	4" x 5"	4" x 6"
4" x 8"	5" x 6"	6" x 8"	8" x 10"
10" x 12"	12" x 15"
Joint, Insertable
2"	3"	4"	5"
6"	8"
Long 1/4 Bend
4" x 12"	4" x 18"
Long 1/8 Bend
2" x 18"	3" x 12"	3" x 18"	4" x 12"
4"x 18"	6" x 18"
Long Plain Increaser
2" x 4" x 24"	3" x 4" x 24"	4" x 5" x 30"	4" x 6" x 30"
Long Sanitary Tapped Tee
2" x 2" x 18"
Long Sweep
2"	3"	4"	5"
6"	8"	10"	12"
15"
Long Tapped Increaser
2" x 4" x 24"
P Trap
2"	3"	4"	5"
6"	8"	10"
P Trap with 1/2" Tapped Heel
2"	3"	4"
P Trap with Cleanout
Right Hand - 4"	Left Hand - 4"
Plug
2"	3"	4"	5"
6"	8"	10"	12"
15"
Reducer
3" x 2"	4" x 2"	4" x 3"	5" x 2"
5" x 3"	5" x 4"	6" x 2"	6" x 3"
6" x 4"	6" x 5"	8" x 3"	8" x 4"
8" x 5"	8" x 6"	10" x 4"	10" x 5"
10" x 6"	10" x 8"	12" x 4"	12" x 6"
12" x 8"	12" x 10"	15" x 6"	15" x 8"
15" x 10"	15" x 12"
Reducing Closet Flange
4" x 3" x 3"
Reducing Long Sweep
3" x 2"	4" x 3"
Return Bend
3"	4"
Running Trap
4"	6"
Running Trap with Double Hub Vent
3" x 3"	4" x 4"	5" x 4"	6" x 4"
6" x 6"	8" x 4"	8" x 6"	10" x 8"
12" x 10"	15" x 12"
Running Trap with Single Hub Vent
3" x 3"	4" x 4"	5" x 4"	6" x 4"
6" x 6"	8" x 6"	10" x 8"	12" x 10"
15" x 12"
Sanitary Cross
4"
Sanitary Cross
2"	3"	3" x 2"	4"
4" x 2"	4" x 3"	5" x 4"	6"
6" x 4"	8" x 4"
Sanitary Cross with 2" Right and Left Side Outlet
4"
Sanitary Tapped Cross
2" x 1 1/2"	2" x 2"	3" x 1 1/2"	3" x 2"
4" x 1 1/2"	4" x 2"
Sanitary Tapped Tee
2" x 1 1/4"	2" x 1 1/2"	2" x 2"	3" x 1 1/2"
3" x 2"	3" x 3"	4" x 1 1/2"	4" x 2"
4" x 3"
Sanitary Tee
2"	3"	3" x 2"	4"
4" x 2"	4" x 3"	5"	5" x 4"
6"	6" x 2"	6" x 3"	6" x 4"
8"	8" x 4"	8" x 6"	10"
10" x 4"	10" x 6"	10" x 8"	12"
12" x 6"	12" x 8"	12" x 10"	15"
15" x 6"	15" x 8"	15" x 12"
Sanitary Tee with 2" Side Outlet
Right and Left Hand - 4"	Left Hand - 4"	Right Hand - 3"	Right Hand - 4"
Left Hand - 3"
Sanitary Tee with 2" Tapped Side Outlet
Right Hand - 4"	Left Hand - 4"	Right and Left Hand - 4"
Sanitary Vented Closet Cross
4" x 2" x 2" x 4"
Sanitary Vented Closet Tee
Right Hand - 4" x 2" x 2" x 4"	Left Hand - 4" x 2" x 2" x 4"
Short Sweep
2"	3"	4"	5"
6"	8"	10"	12"
Short Turn Combination
4"
Spigot Adapter
2" x 2"	3" x 3"	4" x 4"
Straight Cross
4"	4" x 2"
Straight Tapped Cross
3" x 2"	4" x 2"	5" x 2"
Straight Tapped Tee
2" x 1 1/2"	3" x 1 1/2"	3" x 2"	4" x 2"
4" x 3"	4" x 4"	5" x 2"	5" x 4"
6" x 2"	6" x 4"
Straight Tee
2"	3"	3" x 2"	4"
4" x 2"	4" x 3"	6"	6" x 4"
Tapped Spigot
4" x 2"
Tapped Wye
3" x 2"	4" x 1 1/2"	4" x 2"
Test Tee
2" with 2" brass plug	3" with 3" brass plug	4" with 3 1/2" brass plug	4" with 4" brass plug
5" with 5" brass plug	6" with 6" brass plug	8" with 6" brass plug	8" with 8" brass plug
10" with 10" brass plug	12" with 8" side outlet raised head
Test Tee Body
2" with 2" IPS	3" with 3" IPS	4" with 3 1/2" IPS	4" with 4" IPS
5" with 5" IPS	6" with 6" IPS	8" with 8" IPS,	10" with 10" IPS
Torque Set Closet Flange
4" x 2"
Two-way Cleanout
4"	5" x 4"	6" x 4"
Tyseal Closet Flange
4"
Vent Branch
4"
Wye
2"	3"	3" x 2"	4"
4" x 2"	4" x 3"	5"	5" x 2"
5" x 3"	5" x 4"	6"	6" x 2"
6" x 3"	6" x 4"	6" x 5"	8"
8" x 2"	8" x 3"	8" x 4"	8" x 5"
8" x 6"	10"	10" x 3"	10" x 4"
10" x 5"	10" x 6"	10" x 8"	12"
12" x 4"	12" x 5"	12" x 6"	12" x 8"
12" x 10"	15"	15" x 4"	15" x 8"
15" x 10"	15" x 12"
# This facility is a member of the Cast Iron Soil Pipe Institute. * All Listed products from this facility are NSF Certified, whether or not they bear the NSF Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Hubless Soil Pipe# §	Cast Iron	Tyler Pipe	CISPI 301
No-Hub Pipe In 10 Foot Nominal Lengths
1 1/2"	2"	3"	4"
5"	6"	8"	10"
12"	15"
# This facility is a member of the Cast Iron Soil Pipe Institute. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Hubless Soil Fittings# §*	Cast Iron	Tyler Pipe	CISPI 301
1/16 Bend
1 1/2"	2"	3"	4"
5"	6"	8"
1/4 Bend
1 1/2"	2"	3"	4"
5"	6"	8"
1/4 Bend with Heel Inlet
3" x 2"	4" x 2"
1/4 Bend with Side Opening
3" x 2"	4" x 2"
1/5 Bend
2"	3"	4"
1/6 Bend
2"	3"	4"
1/8 Bend
1 1/2"	2"	3"	4"
5"	6"	8"	10"
12"	15"
Blind Plug
1 1/2"	2"	3"	4"
5"	6"	8"	10"
12"	15"
Carrier Fitting
Right - no openings, X opening at 8.5, Z opening 45°, X opening at 8.5 and Z ope	Left - no openings, X opening at 8.5, Z opening 45°, X opening at 8.5 and Z open	Double - no openings, X opening at 8.5, Z opening 45°, X opening at 8.5 and Z op
Closet Flange
4" x 3" x 3 1/2"	4" x 4" x 3 1/2"	4" x 4" x 4"	4" x 3" x 8"
4" x 4" x 8"
Combination
1 1/2"	2"	2" x 1 1/2"	3"
3" x 1 1/2"	3" x 2"	4"	4" x 2"
4" x 3"	5"	5" x 2"	5" x 3"
5" x 4"	6"	6" x 2"	6" x 3"
6" x 4"	6" x 5"	8"	8" x 4"
8" x 6"
Deep Seal P Trap
2"	3"	4"
Double 1/4 Bend
2"	3"	4"
Double Combination
2"	3"	3" x 2"	4"
4" x 2"	4" x 3"
Double Sweep Sanitary Tee (Extended)
2" x 12"	2" x 14"	2" x 16"	2" x 18"
2" x 24"
Double Two Way Cleanout
3"	4"
Double Vertical Sanitary Tapped Tee
2" x 1 1/2"
Double Wye
2"	3"	3" x 2"	4"
4" x 2"	4" x 3"	5" x 4"	6"
6" x 4"	8"	8" x 4"	8" x 6"
Extended Sanitary Tapped Tee
2" x 1 1/2"	3" x 1 1/2"
Extended Short Sweep
2" x 12"	2" x 14"	2" x 16"	2" x 18"
2" x 24"
Extended Vented Tub Wye
2"
Ferrule - Iron Body Cleanout
2"	3"	4"	5"
6"	8"
Figure 1A
2" x 2" x 1 1/2"
Figure 5
2"	3"	3" x 2" x 3" x 3"	4"
4" x 2" x 4" x 4"
Figure 5, Extended
3" x 2" x 3" x 3"
Figure 6
Right Hand - 3" x 2"	Right Hand - 4" x 2"	Left Hand - 3" x 2"	Left Hand - 4" x 2"
Right and Left Hand - 3" x 2"	Right and Left Hand - 4" x 2"
Figure 6 Extended
Right Hand - 3" x 2"	Right Hand - 4" x 2"	Left Hand - 3" x 2"	Left Hand - 4" x 2"
Right and Left Hand - 4" x 2"
Figure 8
Right Hand - 3" x 2"	Right Hand - 4" x 2"	Left Hand - 3" x 2"	Left Hand - 4" x 2"
Right and Left Hand - 3" x 2"
Figure 8 Extended
Right Hand - 4" x 2"	Left Hand - 4" x 2"	Right and Left Hand - 4" x 2"
Florida Special Upright Wye
3"	4"	4" x 2"
Horizontal Twin Sanitary Tapped Tee
3" x 1 1/2"	4" x 1 1/2"
Hub Adapter
2"	3"	4"
Increaser-Reducer
3" x 4"
Long 1/4 Bend
2" x 12"	2" x 14"	2" x 16"	2" x 18"
2" x 24"	3" x 12"	3" x 18"	4" x 12"
Long 1/8 Bend
2" x 6"	2" x 12"	2" x 16"	2" x 18"
3" x 12"	3" x 18"	4" x 12"
Long P Trap
2" x 12"	2" x 14"	2" x 16"	2" x 18"
Long Sweep
1 1/2"	2"	3"	4"
5"	6"
P Trap
1 1/2"	2"	3"	4"
6"
P Trap with 1 1/2" Tapped Side Inlet
Right Hand - 2" x 1 1/2" x 7 1/2"	Right Hand - 2" x 1 1/2" x 18"	Left Hand - 2" x 1 1/2" x 7 1/2"	Left Hand - 2" x 1 1/2" x 18"
P Trap with 2" Side Inlet
Right Hand - 2" x 2" x 7 1/2"	Right Hand - 2" x 2" x 18"	Left Hand - 2" x 2" x 7 1/2"	Left Hand - 2" x 2" x 18"
P Trap with Primer
2"	3"	4"
Prison Fitting
Double Vertical 90° Stack Fitting with 2" vent	Double Vertical 90° Stack Fitting with 2" vent with cleanout modification	Double Vertical 90° Stack Fitting with 2" vent on each side	Double Vertical 90° Stack Fitting with 2" vent on each side with cleanout modifi
Double Vertical 90° Stack Fitting with 3 2" vents	Double Vertical 90° Stack Fitting with 3 2" vents and with cleanout modification
Reducer
2" x 1 1/2"	3" x 1 1/2"	3" x 2"	4" x 2"
4" x 3"	5" x 2"	5" x 3"	5" x 4"
6" x 2"	6" x 3"	6" x 4"	6" x 5"
8" x 2"	8" x 3"	8" x 4"	8" x 5"
8" x 6"	10" x 4"	10" x 6"	10" x 8"
12" x 4"	12" x 6"	12" x 8"	12" x 10"
15" x 4"	15" x 6"	15" x 8"	15" x 10"
15" x 12"
Reducing 1/4 Bend
4" x 3"
Reducing Long Sweep
4" x 3"
Reducing P Trap
3" x 2"
Running Trap with Double Vents
4"
ST w/ 2" 45° San. Opening Above Ctr. (NO Special)
Right Hand - 3"	Right Hand - 4"	Left Hand - 3"	Left Hand - 4"
Right and Left Hand - 3"
ST w/ 2" Side Opening Above Ctr (New Orleans Spec)
Right Hand - 3"	Right Hand - 4"	Left Hand - 3"	Left Hand - 4"
Right and Left Hand - 3"	Right and Left Hand - 4"
Sanitary Cross
1 1/2"	2"	3"	3" x 2"
4"	4" x 2"	4" x 3"	5" x 4"
6"	6" x 4"	8"	8" x 4"
Sanitary Cross w/ 45° Side Opening (New Orleans)
3" x 2"	4" x 2"
Sanitary Cross w/ Side Opening Above Center (NO)
4" x 2"
Sanitary Cross w/R and L Side Openings Abv Ctr(NO)
3" x 2"	4" x 2"
Sanitary Cross, Tapped
1 1/2" x 1 1/2"	2" x 1 1/4"	2" x 1 1/2"	2" x 2"
3" x 1 1/2"	3" x 2"	4" x 1 1/2"	4" x 2"
5" x 1 1/2"	6" x 1 1/2"
Sanitary Tapped Tee
1 1/2" x 1 1/4"	1 1/2" x 1 1/2"	2" x 1 1/4"	2" x 2 1/2"
2" x 2"	3" x 1 1/4"	3" x 1 1/2"	3" x 2"
3" x 3"	4" x 1 1/4"	4" x 1 1/2"	4" x 2"
4" x 3"	5" x 1 1/2"	5" x 2"	6" x 1 1/2"
6" x 2"
Sanitary Tee
1 1/2"	2"	2" x 1 1/2"	3"
3" x 1 1/2"	3" x 2"	4"	4" x 2"
4" x 3"	5"	5" x 2"	5" x 3"
5" x 4"	6"	6" x 2"	6" x 3"
6" x 4"	6" x 5"	8"	8" x 3"
8" x 4"	8" x 5"	8" x 6"
Sanitary Tee with 2" Side Opening - Left Hand
Right Hand - 3"	Right Hand - 4"	Left Hand - 3"	Left Hand - 4"
Short Sweep
2"	3"	4"	5"
6"	8"	10"	12"
15"
Starter Fitting
Right - no openings, X opening at 8.5, Z opening 45°, X opening at 8.5 and Z ope	Left - no openings, X opening at 8.5, Z opening 45°, X opening at 8.5 and Z open	Double - no openings, X opening at 8.5, Z opening 45°, X opening at 8.5 and Z op
Tapped 1/4 Bend
1 1/2" x 1 1/2"	2" x 1 1/4"	2" x 1 1/2"	2" x 2"
Tapped Hub Adapter
1 1/2" x 1 1/2"	2" x 1 1/2"	2" x 2"	3" x 2"
Tapped P Trap
1 1/2" x 1 1/2"	2" x 1 1/2"	2" x 2"
Tapped Wye
2" x 1 1/2"	2" x 2"	3" x 1 1/2"	3" x 2"
4" x 1 1/2"	4" x 2"
Test Tee
2" x 2"	3" x 3"	4" x 4"	5" x 5"
6" x 6"	8" x 8"	10" x 10"
Twin Cleanout
4"
Two-Way Cleanout
3" x 3" x 4"	4" x 3" x 4"	4" x 4" x 4"
Upright Wye
2"	3"	3" x 2"	4"
4" x 2"	4" x 3"	5"	5" x 2"
Vent Bypass
Without inlets, with right, left, or right and left.
Vented Closet Cross
4" x 3" x 2" x 4"	4" x 4" x 2" x 4" x 4"	4" x 4" x 2" x 2" x 4"
Vented Closet Tee
Right Hand - 4" x 2" x 4"	Right Hand - 4" x 4" x 2" x 2" x 4"	Left Hand - 4" x 2" x 4"	Left Hand - 4" x 4" x 2" x 2" x 4"
Vented Tub Wye
2"
Vented Tub Wye Extended Offset Left Hand
Right Hand - 2"	Left Hand - 2"
Wye
1 1/2"	2"	3"	3" x 1 1/2"
3" x 2"	4"	4" x 2"	4" x 3"
5"	5" x 2"	5" x 3"	5" x 4"
6"	6" x 2"	6" x 3"	6" x 4"
6" x 5"	8"	8" x 2"	8" x 3"
8" x 4"	8" x 5"	8" x 6"	10"
10" x 4"	10" x 6"	10" x 8"	12"
15"
# This facility is a member of the Cast Iron Soil Pipe Institute. * All Listed products from this facility are NSF Certified, whether or not they bear the NSF Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.

Number of matching Manufacturers is 1
Number of matching Products is 3306
Processing time was 1 seconds

NSF Product and Service Listings

Did you know?

Connect with NSF