NSF Product and Service Listings
These NSF Official Listings are current as of Thursday, January 15, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?Company=43810&Standard=014&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| Formosa Plastics Corporation, Texas | |
| 201 Formosa Drive | |
| P.O. Box 700 | |
| Point Comfort, TX 77978 | |
| United States | |
| 361-987-7960 |
Facility : Baton Rouge, LA
Ingredient Suppliers
| Product Type | Trade Name | Max Use Level (phr) | |
| PVC Resin+ [1] [2] | Formolon 622 | 100 | |
| PVC Resin+ [1] [2] | Formolon 622F | 100 | |
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified to NSF/ANSI 14 and also approved in Table 1 of the PPI PVC Range Composition.
Approved for a use range of 100 phr.
[2] Use of this ingredient in NSF Certified products requires prior authorization from NSF,
unless user is an authorized holder of the PPI PVC Range Composition.
|
|||
Facility : Point Comfort, TX
Ingredient Suppliers
| Product Type | Trade Name | Max Use Level (phr) | |
| PVC Resin+ [1] [2] | Formolon 622 | 100 | |
| PVC Resin+ [1] [2] | Formolon 622S | 100 | |
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified to NSF/ANSI 14 and also approved in Table 1 of the PPI PVC Range Composition.
Approved for a use range of 100 phr.
[2] Use of this ingredient in NSF Certified products requires prior authorization from NSF,
unless user is an authorized holder of the PPI PVC Range Composition.
|
|||
Drain, Waste, and Vent, Continuous Waste, and Sewer Materials
| Material Type | End Use | Trade Name | Product Standard |
| PVC | 1, 5 | FORMOLON AW02 | ASTM D1784 12454 |
| PVC | 1, 5 | FORMOLON AW04 | ASTM D1784 12454 |
| PVC | 1, 5 | FORMOLON AW05 | ASTM D1784 12454 |
| PVC | 1, 5 | FORMOLON AW13 | ASTM D1784 12454 |
| PVC | 1, 5 | FORMOLON-550 | ASTM D1784 12454 |
Gas Applications - Materials
| Material Type | End Use | Trade Name | Product Standard |
| PE4710 | 1 | E6210C BLK | ASTM D2513 445574 C |
| PE4710 | 1 | E6210C BLK | ASTM D3350 445574 C |
| PE4710 | 1 | E6210C BLK2 | ASTM D2513 445574 C |
| PE4710 | 1 | E6210C BLK2 | ASTM D3350 445574 C |
| PE4710 | 1 | E6210F2 BLK | ASTM D2513 445574 C |
| PE4710 | 1 | E6210F2 BLK | ASTM D3350 445574 C |
| PE 2708[1] | 1 | HP3902 YL2 | ASTM D3350 237373 E |
| PE 2708[1] | 1 | HP3902 YL2 | ASTM D2513 237373 E |
| PE 2708[1] | 1 | HP3902/PO2240 | ASTM D2513 237373 E |
| PE 2708[1] | 1 | HP3902/PO2240 | ASTM D3350 237373 E |
| PE 2708[1] | 1 | HP3902 YL | ASTM D2513 237373 E |
| PE 2708[1] | 1 | HP3902 YL | ASTM D3350 237373 E |
[1] Flexural modulus is 95,000 - 125,000 psi. |
|||
Potable Water - Materials
| Material Type | End Use | Trade Name | Product Standard |
| PE 4710# ++ | 1 | DE6210A | ASTM D3350 445574C |
| PE 4710¢ ++ | 1 | DE6210A | CSA B137.1 445574C |
| PE 100# ++ | 1 | DE6210A | ASTM D3350 445576C |
| PE 100# ++ | 1 | DE6210A/E6210A | ASTM D3350 445576C |
| PE 4710¢ ++ | 1 | DE6210A/E6210A | CSA B137.1 445574C |
| PE 4710# ++ | 1 | DE6210A/E6210A | ASTM D3350 445574C |
| PE 4710# ++ | 1 | E6210A | ASTM D3350 445574C |
| PE 4710¢ ++ | 1 | E6210A | CSA B137.1 445574C |
| PE 4710# ++ | 1 | E6210A | ASTM D3350 445576C |
| PE 100# ++ | 1 | E6210A-MD53542 | ASTM D3350 445576C |
| PE 4710# ++ | 1 | E6210A-MD53542 | ASTM D3350 445574C |
| PE 4710¢ ++ | 1 | E6210A-MD53542 | CSA B137.1 445574C |
| PE 100# ++ | 1 | E6210A-PO2107 | ASTM D3350 445576C |
| PE 4710# ++ | 1 | E6210A-PO2107 | ASTM D3350 445574C |
| PE 4710¢ ++ | 1 | E6210A-PO2107 | CSA B137.1 445574C |
| PE 4710¢ ++ | E6210C | CSA B137.1 445574C | |
| PE 4710## ++ | E6210C | ASTM D3350 445574C | |
| PE 4710¢ ++ | 1 | E6210C BLK | CSA B137.1 445574C |
| PE 4710## ++ | 1 | E6210C BLK | ASTM D3350 445574C |
| PE 4710## ++ | E6210C BLK2 | ASTM D3350 445574C | |
| PE 4710¢ ++ | E6210C BLK2 | CSA B137.1 445574C | |
| PE 4710¢ ++ | 1 | E6210F2 BLK | CSA B137.1 445574C |
| PE 4710++ ### | 1 | E6210F2 BLK | ASTM D3350 445574C |
| PE 4710++ ### | 1 | E6210F2 BLK2 | ASTM D3350 445574C |
| PE4710¢ ++ | 1 | E6210F2 BLK2 | CSA B137.1 445574C |
| PE 4710¢ ++ | 1 | E6210F2/MD53542 | CSA B137.1 445574C |
| PE 4710++ ### | 1 | E6210F2/MD53542 | ASTM D3350 445574C |
| PVC* + | 1 | FORMOLON AW02 | ASTM D1784 12454 |
| PVC* + | 1 | FORMOLON AW04 | ASTM D1784 12454 |
| PVC* + | 1 | FORMOLON AW05 | ASTM D1784 12454 |
| PVC* + | 1 | FORMOLON AW13 | ASTM D1784 12454 |
| PVC* + | 1 | FORMOLON-550 | ASTM D1784 12454 |
| PE 4710¢ ++ | 1 | Formolene DE6210A | CSA B137.1 445574C |
| PE 4710# ++ | 1 | Formolene DE6210A | ASTM D3350 445574C |
| PE 100# ++ | 1 | Formolene DE6210A | ASTM D3350 445576C |
| PE 4710¢ ++ | 1 | Formolene DE6210A/E6210A | CSA B137.1 445574C |
| PE 4710# ++ | 1 | Formolene DE6210A/E6210A | ASTM D3350 445574C |
| PE 100# ++ | 1 | Formolene DE6210A/E6210A | ASTM D3350 445576C |
| PE 4710¢ ++ | 1 | Formolene E6210A | CSA B137.1 445574C |
| PE 4710# ++ | 1 | Formolene E6210A | ASTM D3350 445574C |
| PE 100# ++ | 1 | Formolene E6210A | ASTM D3350 445576C |
| PE 3608& + ^ ¢ | 1 | Formolene HP4401 | ASTM D3350 345464C |
| PE 3608& + ^ ¢ | 1 | HP4401/AS4642 | ASTM D3350 345464C |
| PE 3608& + ^ ¢ | 1 | HP4401/AS4692 | ASTM D3350 345464C |
| PE 3608& + ^ ¢ | 1 | HP4401/MDPE-535-42 | ASTM D3350 345464C |
# Meets the chlorine resistance requirements of CC1 in Table 2 of ASTM D3350 when tested
in accordance with ASTM F2263.
& Material has a chlorine resistance rating of CC0 (unspecified) per Table 2 of ASTM D3350.
* Meets the material requirements of CSA B137.3
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ Meets the material requirements of CSA B137.1
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
## Meets the chlorine resistance requirements of CC2 in Table 2 of ASTM D3350 when tested
in accordance with ASTM F2263.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
### Meets the chlorine resistance requirements of CC3 in Table 2 of ASTM D3350 when tested
in accordance with ASTM F2263.
|
|||
Number of matching Manufacturers is 1
Number of matching Products is 66
Processing time was 0 seconds
