NSF Product and Service Listings
These NSF Official Listings are current as of Thursday, January 15, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?Company=4T920&Standard=014&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| Atkore Plastic Pipe Corporation | |
| 16100 South Lanthrop Avenue | |
| Harvey, IL 60426 | |
| United States | |
| 708-225-2075 |
Facility : Tampa, FL
Drain, Waste, and Vent - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* |
PVC |
Heritage Plastics |
ASTM D2665 |
|||
| 1 1/4" - 12" Sch 40 | ||||||
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. |
||||||
Fire Main - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ [G] |
PVC |
Heritage Plastics |
UL 1285 |
|||
| 4" DR DR 14, DR 18, DR 25 | ||||||
| 6" DR DR 14, DR 18, DR 25 | ||||||
| 8" DR DR 14, DR 18, DR 25 | ||||||
| 10" DR DR 14, DR 18, DR 25 | ||||||
| 12" DR DR 14, DR 18, DR 25 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* + [G] |
PVC |
Heritage Plastics |
ASTM D1785 |
|||
| 1/2" - 12" Sch 40 | ||||||
| 1/2" - 12" Sch 80 | ||||||
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
facility.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe* + [G] |
PVC |
Heritage Plastics |
ASTM D2241 |
|||
| 1/2" - 6" SDR 13.5 | ||||||
| 3/4" - 12" SDR 17 | ||||||
| 3/4" - 12" SDR 21 | ||||||
| 1" - 12" SDR 26 | ||||||
| 2 1/2" - 12" SDR 32.5 | ||||||
| 3" - 12" SDR 41 | ||||||
| 4" - 12" SDR 64 | ||||||
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
facility.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ [G] |
PVC |
Heritage Plastics |
AWWA C900 |
|||
| 6" DR DR 14, DR 18, DR 25 | ||||||
| 4" DR DR 14, Dr 18, Dr 25 | ||||||
| 8" DR DR 14, DR 18, DR 25 | ||||||
| 12" DR DR 14, DR 18, DR 25 | ||||||
| 10" DR DR 14, DR 18, DR 25 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Reclaimed Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ [G] |
PVC |
Heritage Plastics |
AWWA C900 |
|||
| 4" DR 14, 18, 25 | ||||||
| 6" DR 14, 18, 25 | ||||||
| 8" DR 14, 18, 25 | ||||||
| 10" DR 14, 18, 25 | ||||||
| 12" DR 14, 18, 25 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Sewer Main - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ [G] |
PVC |
Heritage Plastics |
AWWA C900 |
|||
| 4" DR 14, 18, 25 | ||||||
| 6" DR 14, 18, 25 | ||||||
| 8" DR 14, 18, 25 | ||||||
| 10" DR 14, 18, 25 | ||||||
| 12" DR 14, 18, 25 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Well Casings
| Product Type | Material Type | Trade Name | Product Standard | |||
Well Casings+ |
PVC |
Heritage Plastics |
ASTM F480 |
|||
| 2" - 12" Sch 40 | ||||||
| 2" - 12" Sch 80 | ||||||
| 5" SDR 21 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
Facility : Louisville, KY
Drain, Waste, and Vent - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* |
PVC |
Heritage Plastics |
ASTM D2665 |
|||
| 1 1/4" - 12" Sch 40 | ||||||
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. |
||||||
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* + |
PVC |
Heritage Plastics |
ASTM D1785 |
|||
| 1/2" - 12" Sch 40 | ||||||
| 1/2" - 12" Sch 80 | ||||||
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
Facility : Eugene, OR
Drain, Waste, and Vent - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* |
PVC |
Heritage Plastics |
ASTM D2665 |
|||
| 1 1/4" - 8" Sch 40 | ||||||
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. |
||||||
Fire Main - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ [G] |
PVC |
Heritage Plastics |
UL 1285 |
|||
| 4" DR 14, 18, 25 | ||||||
| 6" DR 14, 18, 25 | ||||||
| 8" DR 14, 18, 25 | ||||||
| 10" DR 14, 18, 25 | ||||||
| 12" DR 14, 18, 25 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* [G] |
PVC |
Heritage Plastics |
AWWA C900 |
|||
| 4" DR 14, 18, 25 | ||||||
| 6" DR 14, 18, 25 | ||||||
| 8" DR 14, 18, 25 | ||||||
| 10" DR 14, 18, 25 | ||||||
| 12" DR 14, 18, 25 | ||||||
* Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Reclaimed Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ [G] |
PVC |
Heritage Plastics |
AWWA C900 |
|||
| 4" DR 14, 18, 25 | ||||||
| 6" DR 14, 18, 25 | ||||||
| 8" DR 14, 18, 25 | ||||||
| 10" DR 14, 18, 25 | ||||||
| 12" DR 14, 18, 25 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Sewer Main - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ [G] |
PVC |
Heritage Plastics |
AWWA C900 |
|||
| 4" DR 14, 18, 25 | ||||||
| 6" DR 14, 18, 25 | ||||||
| 8" DR 14, 18, 25 | ||||||
| 10" DR 14, 18, 25 | ||||||
| 12" DR 14, 18, 25 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Facility : Pendleton, OR
Drain, Waste, and Vent - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* |
PVC |
Heritage Plastics |
ASTM D2665 |
|||
| 1 1/4" - 8" Sch 40 | ||||||
* Sockets and gasketed bell ends are not tested or listed by NSF for this production facility. |
||||||
Facility : Dallas, TX
Drain, Waste, and Vent - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* |
PVC |
Heritage Plastics |
ASTM D2665 |
|||
| 1 1/4" - 12" Sch 40 | ||||||
* Sockets and gasketed bell ends are not tested or listed by NSF for this production |
||||||
Fire Main - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ [G] |
PVC |
Heritage Plastics |
UL 1285 |
|||
| 4" DR 14, 18, 25 | ||||||
| 6" DR 14, 18, 25 | ||||||
| 8" DR 14, 18, 25 | ||||||
| 10" DR 14, 18, 25 | ||||||
| 12" DR 14, 18, 25 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ [G] |
PVC |
Heritage Plastics |
AWWA C900 |
|||
| 4" DR 14, 18, 25 | ||||||
| 6" DR 14, 18, 25 | ||||||
| 8" DR 14, 18, 25 | ||||||
| 10" DR 14, 18, 25 | ||||||
| 12" DR 14, 18, 25 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe* + [G] |
PVC |
Heritage Plastics |
ASTM D1785 |
|||
| 1/2" - 12" Sch 40 | ||||||
| 1/2" - 12" Sch 80 | ||||||
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
facility.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe* + [G] |
PVC |
Heritage Plastics |
ASTM D2241 |
|||
| 1/2" - 6" SDR 13.5 | ||||||
| 3/4" - 12" SDR 17 | ||||||
| 3/4" - 12" SDR 21 | ||||||
| 1" - 12" SDR 26 | ||||||
| 2 1/2" - 12" SDR 32.5 | ||||||
| 3" - 12" SDR 41 | ||||||
| 4" - 12" SDR 64 | ||||||
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
facility.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Reclaimed Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ [G] |
PVC |
Heritage Plastics |
AWWA C900 |
|||
| 4" DR 14, 18, 25 | ||||||
| 6" DR 14, 18, 25 | ||||||
| 8" DR 14, 18, 25 | ||||||
| 10" DR 14, 18, 25 | ||||||
| 12" DR 14, 18, 25 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Sewer Main - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ [G] |
PVC |
Heritage Plastics |
AWWA C900 |
|||
| 4" DR 14, 18, 25 | ||||||
| 6" DR 14, 18, 25 | ||||||
| 8" DR 14, 18, 25 | ||||||
| 10" DR 14, 18, 25 | ||||||
| 12" DR 14, 18, 25 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Number of matching Manufacturers is 1
Number of matching Products is 88
Processing time was 0 seconds
