NSF Product and Service Listings
These NSF Official Listings are current as of Monday, December 2, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?Company=50820&Standard=014&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Uponor | |
5925 148th Street West | |
Apple Valley, MN 55124 | |
United States | |
800-321-4739 | |
952-891-2000 | |
Visit this company's website |
Facility : # 1 China
Potable Water - Pipe and Fittings
Product Type | Material Type | Trade Name | Product Standard | ||||
Valves¢ § +++ [1] [G] |
MLTPL |
Uponor Logo |
ASTM F1960 |
||||
ProPEX LF Brass Commercial Ball Valve (full port) |
|||||||
1/2" PEX x 1/2" PEX (LFC4825050SS) | 3/4" PEX x 3/4" PEX (LFC4827575SS) | 1" PEX x 1" PEX (LFC4821010SS) | 1 1/4" PEX x 1 1/4" PEX (LFC4821313SS) | ||||
1 1/2" PEX x 1 1/2" PEX (LFC4821515SS) | 2" PEX x 2" PEX (LFC4822020SS) | ||||||
ProPEX LF Brass Transition Ball Valve (full port) |
|||||||
1/2" PEX x 1/2" FNPT (LFT4905050SS) | 3/4" PEX x 3/4" FNPT (LFT4907575SS) | 1" PEX x 1" FNPT (LFT4901010SS) | 1 1/4" PEX x 1 1/4" FNPT (LFT4901313SS) | ||||
1 1/2" PEX x 1 1/2" FNPT (LFT4901515SS) | 2" PEX x 2" FNPT (LFT4902020SS) | 2 1/2" PEX x 2 1/2" FNPT (LFT4902525SS) | 3" PEX x 3" FNPT (LFT4903030SS) | ||||
1/2" PEX x 1/2" MNPT (LFT4915050SS) | 3/4" PEX x 3/4" MNPT (LFT4917575SS) | 1" PEX x 1" MNPT (LFT4911010SS) | 1 1/4" PEX x 1 1/4" MNPT (LFT4911313SS) | ||||
1 1/2" PEX x 1 1/2" MNPT (LFT4911515SS) | 2" PEX x 2" MNPT (LFT4912020SS) | 1/2" PEX x 1/2" Copper Press (LFT4925050SS) | 3/4" PEX x 3/4" Copper Press (LFT4927575SS) | ||||
1" PEX x 1" Copper Press (LFT4921010SS) | 1 1/4" PEX x 1 1/4" Copper Press (LFT4921313SS) | 1 1/2" PEX x 1 1/2" Copper Press (LFT4921515SS) | 2" PEX x 2" Copper Press (LFT4922020SS) | ||||
2 1/2" PEX x 2 1/2" Copper Press (LFT4922525SS) | 3" PEX x 3" Copper Press (LFT4923030SS) | 3/4" PEX x 3/4" Flange (LFT4947575SS) | 1" PEX x 1" Flange (LFT4941010SS) | ||||
1 1/4" PEX x 1 1/4" Flange (LFT4941313SS) | |||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Replacement Handles are available for these valves: LFC5615075 (Replacement Handle for 1/2" and 3/4" Commercial Ball Valves) LFC5615075H (Replacement Handle for 1/2" and 3/4" Commercial Ball Valves) LFC5611013 (Replacement Handle for 1" and 1-1/4" Commercial Ball Valves) LFC5611520 (Replacement Handle for 1-1/2" and 2" Commercial Ball Valves) [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Valves¢ § +++ [G] |
MLTPL |
Uponor Logo |
ASTM F1960 |
||||
ProPEX LF Brass Ball Valve (full port) |
|||||||
1/2" PEX x 1/2" PEX (LFR4815050 and LFR48150R) | 3/4" PEX x 3/4" PEX (LFR4817575 and LFR48175R) | 1" PEX x 1" PEX (LFR4811010 and LFR48110R) | |||||
ProPEX LF Brass Stop & Drain Ball Valve-full port |
|||||||
1/2" PEX x 1/2" PEX (LFD4815050 and LFD48150R) | 3/4" PEX x 3/4" PEX (LFD4817575 and LFD48175R) | 1" PEX x 1" PEX (LFD4811010) | |||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Valves¢ § +++ [1] [G] |
MLTPL |
Uponor Logo |
ASTM F877 |
||||
ProPEX LF Brass Commercial Ball Valve (full port) |
|||||||
1/2" PEX x 1/2" PEX (LFC4825050SS) | 3/4" PEX x 3/4" PEX (LFC4827575SS) | 1" PEX x 1" PEX (LFC4821010SS) | 1 1/4" PEX x 1 1/4" PEX (LFC4821313SS) | ||||
1 1/2" PEX x 1 1/2" PEX (LFC4821515SS) | 2" PEX x 2" PEX (LFC4822020SS) | ||||||
ProPEX LF Brass Transition Ball Valve (full port) |
|||||||
1/2" PEX x 1/2" FNPT (LFT4905050SS) | 3/4" PEX x 3/4" FNPT (LFT4907575SS) | 1" PEX x 1" FNPT (LFT4901010SS) | 1 1/4" PEX x 1 1/4" FNPT (LFT4901313SS) | ||||
1 1/2" PEX x 1 1/2" FNPT (LFT4901515SS) | 2" PEX x 2" FNPT (LFT4902020SS) | 2 1/2" PEX x 2 1/2" FNPT (LFT4902525SS) | 3" PEX x 3" FNPT (LFT4903030SS) | ||||
1/2" PEX x 1/2" MNPT (LFT4915050SS) | 3/4" PEX x 3/4" MNPT (LFT4917575SS) | 1" PEX x 1" MNPT (LFT4911010SS) | 1 1/4" PEX x 1 1/4" MNPT (LFT4911313SS) | ||||
1 1/2" PEX x 1 1/2" MNPT (LFT4911515SS) | 2" PEX x 2" MNPT (LFT4912020SS) | 1/2" PEX x 1/2" Copper Press (LFT4925050SS) | 3/4" PEX x 3/4" Copper Press (LFT4927575SS) | ||||
1" PEX x 1" Copper Press (LFT4921010SS) | 1 1/4" PEX x 1 1/4" Copper Press (LFT4921313SS) | 1 1/2" PEX x 1 1/2" Copper Press (LFT4921515SS) | 2" PEX x 2" Copper Press (LFT4922020SS) | ||||
2 1/2" PEX x 2 1/2" Copper Press (LFT4922525SS) | 3" PEX x 3" Copper Press (LFT4923030SS) | 3/4" PEX x 3/4" Flange (LFT4947575SS) | 1" PEX x 1" Flange (LFT4941010SS) | ||||
1 1/4" PEX x 1 1/4" Flange (LFT4941313SS) | |||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Replacement Handles are available for these valves: LFC5615075 (Replacement Handle for 1/2" and 3/4" Commercial Ball Valves) LFC5615075H (Replacement Handle for 1/2" and 3/4" Commercial Ball Valves) LFC5611013 (Replacement Handle for 1" and 1-1/4" Commercial Ball Valves) LFC5611520 (Replacement Handle for 1-1/2" and 2" Commercial Ball Valves) [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Valves¢ § +++ [G] |
MLTPL |
Uponor Logo |
ASTM F877 |
||||
ProPEX LF Brass Ball Valve (full port) |
|||||||
1/2" PEX x 1/2" PEX (LFR4815050 and LFR48150R) | 3/4" PEX x 3/4" PEX (LFR4817575 and LFR48175R) | 1" PEX x 1" PEX (LFR4811010 and LFR48110R) | |||||
ProPEX LF Brass Stop & Drain Ball Valve-full port |
|||||||
1/2" PEX x 1/2" PEX (LFD4815050 and LFD48150R) | 3/4" PEX x 3/4" PEX (LFD4817575 and LFD48175R) | 1" PEX x 1" PEX (LFD4811010) | |||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Valves¢ § +++ [1] [G] |
MLTPL |
Uponor Logo |
CSA B137.5 |
||||
ProPEX LF Brass Commercial Ball Valve (full port) |
|||||||
1/2" PEX x 1/2" PEX (LFC4825050SS) | 3/4" PEX x 3/4" PEX (LFC4827575SS) | 1" PEX x 1" PEX (LFC4821010SS) | 1 1/4" PEX x 1 1/4" PEX (LFC4821313SS) | ||||
1 1/2" PEX x 1 1/2" PEX (LFC4821515SS) | 2" PEX x 2" PEX (LFC4822020SS) | ||||||
ProPEX LF Brass Transition Ball Valve (full port) |
|||||||
1/2" PEX x 1/2" FNPT (LFT4905050SS) | 3/4" PEX x 3/4" FNPT (LFT4907575SS) | 1" PEX x 1" FNPT (LFT4901010SS) | 1 1/4" PEX x 1 1/4" FNPT (LFT4901313SS) | ||||
1 1/2" PEX x 1 1/2" FNPT (LFT4901515SS) | 2" PEX x 2" FNPT (LFT4902020SS) | 2 1/2" PEX x 2 1/2" FNPT (LFT4902525SS) | 3" PEX x 3" FNPT (LFT4903030SS) | ||||
1/2" PEX x 1/2" MNPT (LFT4915050SS) | 3/4" PEX x 3/4" MNPT (LFT4917575SS) | 1" PEX x 1" MNPT (LFT4911010SS) | 1 1/4" PEX x 1 1/4" MNPT (LFT4911313SS) | ||||
1 1/2" PEX x 1 1/2" MNPT (LFT4911515SS) | 2" PEX x 2" MNPT (LFT4912020SS) | 1/2" PEX x 1/2" Copper Press (LFT4925050SS) | 3/4" PEX x 3/4" Copper Press (LFT4927575SS) | ||||
1" PEX x 1" Copper Press (LFT4921010SS) | 1 1/4" PEX x 1 1/4" Copper Press (LFT4921313SS) | 1 1/2" PEX x 1 1/2" Copper Press (LFT4921515SS) | 2" PEX x 2" Copper Press (LFT4922020SS) | ||||
2 1/2" PEX x 2 1/2" Copper Press (LFT4922525SS) | 3" PEX x 3" Copper Press (LFT4923030SS) | 3/4" PEX x 3/4" Flange (LFT4947575SS) | 1" PEX x 1" Flange (LFT4941010SS) | ||||
1 1/4" PEX x 1 1/4" Flange (LFT4941313SS) | |||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Replacement Handles are available for these valves: LFC5615075 (Replacement Handle for 1/2" and 3/4" Commercial Ball Valves) LFC5615075H (Replacement Handle for 1/2" and 3/4" Commercial Ball Valves) LFC5611013 (Replacement Handle for 1" and 1-1/4" Commercial Ball Valves) LFC5611520 (Replacement Handle for 1-1/2" and 2" Commercial Ball Valves) [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Valves¢ § +++ [G] |
MLTPL |
Uponor Logo |
CSA B137.5 |
||||
ProPEX LF Brass Ball Valve (full port) |
|||||||
1/2" PEX x 1/2" PEX (LFR4815050 and LFR48150R) | 3/4" PEX x 3/4" PEX (LFR4817575 and LFR48175R) | 1" PEX x 1" PEX (LFR4811010 and LFR48110R) | |||||
ProPEX LF Brass Stop & Drain Ball Valve-full port |
|||||||
1/2" PEX x 1/2" PEX (LFD4815050 and LFD48150R) | 3/4" PEX x 3/4" PEX (LFD4817575 and LFD48175R) | 1" PEX x 1" PEX (LFD4811010) | |||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Valves¢ § +++ [1] [2] [G] |
MLTPL |
Uponor Logo |
NSF 359 |
||||
ProPEX LF Brass Commercial Ball Valve (full port) |
|||||||
1/2" PEX x 1/2" PEX (LFC4825050SS) | 3/4" PEX x 3/4" PEX (LFC4827575SS) | 1" PEX x 1" PEX (LFC4821010SS) | 1 1/4" PEX x 1 1/4" PEX (LFC4821313SS) | ||||
1 1/2" PEX x 1 1/2" PEX (LFC4821515SS) | 2" PEX x 2" PEX (LFC4822020SS) | ||||||
ProPEX LF Brass Transition Ball Valve (full port) |
|||||||
1/2" PEX x 1/2" FNPT (LFT4905050SS) | 3/4" PEX x 3/4" FNPT (LFT4907575SS) | 1" PEX x 1" FNPT (LFT4901010SS) | 1 1/4" PEX x 1 1/4" FNPT (LFT4901313SS) | ||||
1 1/2" PEX x 1 1/2" FNPT (LFT4901515SS) | 2" PEX x 2" FNPT (LFT4902020SS) | 2 1/2" PEX x 2 1/2" FNPT (LFT4902525SS) | 3" PEX x 3" FNPT (LFT4903030SS) | ||||
1/2" PEX x 1/2" MNPT (LFT4915050SS) | 3/4" PEX x 3/4" MNPT (LFT4917575SS) | 1" PEX x 1" MNPT (LFT4911010SS) | 1 1/4" PEX x 1 1/4" MNPT (LFT4911313SS) | ||||
1 1/2" PEX x 1 1/2" MNPT (LFT4911515SS) | 2" PEX x 2" MNPT (LFT4912020SS) | 1/2" PEX x 1/2" Copper Press (LFT4925050SS) | 3/4" PEX x 3/4" Copper Press (LFT4927575SS) | ||||
1" PEX x 1" Copper Press (LFT4921010SS) | 1 1/4" PEX x 1 1/4" Copper Press (LFT4921313SS) | 1 1/2" PEX x 1 1/2" Copper Press (LFT4921515SS) | 2" PEX x 2" Copper Press (LFT4922020SS) | ||||
2 1/2" PEX x 2 1/2" Copper Press (LFT4922525SS) | 3" PEX x 3" Copper Press (LFT4923030SS) | 3/4" PEX x 3/4" Flange (LFT4947575SS) | 1" PEX x 1" Flange (LFT4941010SS) | ||||
1 1/4" PEX x 1 1/4" Flange (LFT4941313SS) | |||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Replacement Handles are available for these valves: LFC5615075 (Replacement Handle for 1/2" and 3/4" Commercial Ball Valves) LFC5615075H (Replacement Handle for 1/2" and 3/4" Commercial Ball Valves) LFC5611013 (Replacement Handle for 1" and 1-1/4" Commercial Ball Valves) LFC5611520 (Replacement Handle for 1-1/2" and 2" Commercial Ball Valves) [2] Valves rated at 200 psi @ 200°F. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Valves¢ § +++ [2] [G] |
MLTPL |
Uponor Logo |
NSF 359 |
||||
ProPEX LF Brass Ball Valve (full port) |
|||||||
1/2" PEX x 1/2" PEX (LFR4815050 and LFR48150R) | 3/4" PEX x 3/4" PEX (LFR4817575 and LFR48175R) | 1" PEX x 1" PEX (LFR4811010 and LFR48110R) | |||||
ProPEX LF Brass Stop & Drain Ball Valve-full port |
|||||||
1/2" PEX x 1/2" PEX (LFD4815050 and LFD48150R) | 3/4" PEX x 3/4" PEX (LFD4817575 and LFD48175R) | 1" PEX x 1" PEX (LFD4811010) | |||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Valves rated at 200 psi @ 200°F. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : Frankfort, IL
Potable Water - Pipe and Fittings
Product Type | Material Type | Trade Name | Product Standard | ||||
Fittings¢ § +++ [G] |
Brass |
Uponor Logo |
ASTM F1960 |
||||
Brass Adapter (PEX x Copper) |
|||||||
1/2" x 1/2" (LF4515050) | 1/2" x 1/2" (LF45150R) | 1/2" x 1/2" (LF45150R25) | 3/4" x 3/4" (LF4517575) | ||||
3/4" x 3/4" (LF45175R) | |||||||
Brass Elbow (MIP) |
|||||||
1/2" x 1/2" (LF4125050) | 1/2" x 1/2" (LF41250R) | ||||||
Brass Female Threaded Adapter (PEX x NPT) |
|||||||
1/2" x 1/2" (LF4575050/LF45750R/LF45750R10) | 3/4" x 3/4" (LF4577575) | 1" x 3/4" (LF4571075) | 1" x 1" (LF4571010) | ||||
1" x 1" (LF45710R) | 1 1/4" x 1 1/4" (LF4571313) | ||||||
Brass Fitting Adapter (PEX x Copper) |
|||||||
1/2" x 1/2" (LF4505050) | 1/2" x 1/2" (LF45050R) | 1/2" x 3/4" (LF4505075) | 3/4" x 3/4" (LF4507575) | ||||
3/4" x 3/4" (LF45075R) | 1" x 1" (LF4501010) | 1 1/4" x 1 1/4" (LF4501313) | |||||
Brass Male Threaded Adapter (PEX x NPT) |
|||||||
1/2" x 1/2" (LF4525050) | 3/4" x 3/4" (LF4527575) | 3/4" x 3/4" (LF45275R) | 1" x 1" (LF4521010) | ||||
1" x 1" (LF45210R) | 1 1/4" x 1 1/4" (LF4521313) | ||||||
Brass Sweat Adapter (PEX x Copper) |
|||||||
1/2" x 3/4" (LF4515075) | 1" x 1" (LF4511010) | 1" x 1" (LF45110R) | 1 1/4" x 1 1/4" (LF4511313) | ||||
Drop Ear Brass Elbow (PEX x FIP) |
|||||||
1/2" x 3/8" (LF4235038) | 1/2" x 1/2" (LF4235050) | 1/2" x 1/2" (LF42350R/LF42350R10) | 3/4" x 3/4" (LF4237575) | ||||
ProPEX (LF) Brass Adapter (PEX x Copper) |
|||||||
3/8" x 1/2" (LF4513850) | 3/4" x 1/2" (LF4517550) | 3/4" x 1" (LF4517510) | 1 1/2" x 1 1/2" (LF4511515) | ||||
2" x 2" (LF4512020) | |||||||
ProPEX (LF) Brass Connector (PEX x Compression) |
|||||||
1/2" x 3/8" (LF4975038) | |||||||
ProPEX (LF) Brass Coupling (PEX x PEX) |
|||||||
3/8" x 1/2" (LF4543850) | 1 1/2" x 1 1/2" (LF4541515) | 1/2" x 1/2" (LF4545050) | 1/2" x 3/4" (LF4545075) | ||||
3/4" x 3/4" (LF4547575) | 3/4" x 1" (LF4547510) | 1" x 1" (LF4541010) | 1 1/4" x 1" (LF4541310) | ||||
1 1/4" x 1 1/4" (LF4541313) | 1 1/2" x 1 1/4" (LF4541513) | 2" x 1 1/2" (LF4542015) | |||||
ProPEX (LF) Brass Elbow (PEX x PEX) |
|||||||
3/4" x 3/4" (LF4710750) | 1" x 1" (LF4711000) | ||||||
ProPEX (LF) Brass Female Threaded Adapter(PEXxNPT) |
|||||||
1/2" x 3/4" (LF4575075) | 1/2" x 3/4" (LF4575075R) | 3/4" x 1" (LF4577510) | 1 1/2" x 1" (LF4571515) | ||||
2" x 2" (LF4572020) | |||||||
ProPEX (LF) Brass Fitting Adapter (PEX x Copper) |
|||||||
3/4" x 1/2" (LF4507550) | 3/4" x 1" (LF4507510) | 1 1/2" x 1 1/2" (LF4501515) | 2" x 2" (LF4502020) | ||||
ProPEX (LF) Brass Male Threaded Adapter(PEX x NPT) |
|||||||
3/8" x 1/2" (LF4523850) | 1/2" x 3/4" (LF4525075) | 1/2" x 3/4" (LF4525075R) | 3/4" x 1" (LF4527510) | ||||
3/4" x 1" (LF4527510R) | 1" x 3/4" (LF4521075) | 1" x 3/4" (LF4521075R) | 1 1/2" x 1 1/2" (LF4521515) | ||||
2" x 2" (LF4522020) | |||||||
ProPEX (LF) Brass Reducing Tee (PEX x PEX x PEX) |
|||||||
3/4" x 3/4" x 1/2" (LF4707550) | 3/4" x 3/4" x 1" (LF4707710) | 1" x 1" x 1/2" (LF4701150) | 1" x 3/4" x 3/4" (LF4701775) | ||||
1" x 1" x 3/4" (LF4701175) | 1" x 3/4" x 1" (LF4701751) | ||||||
ProPEX (LF) Brass Sweat Adapter |
|||||||
1/2" (LF4995050) | |||||||
ProPEX (LF) Brass Tee (PEX x PEX x PEX) |
|||||||
1/2" x 1/2" x 1/2" (LF4705050) | 3/4" x 3/4" x 3/4" (LF4707575) | 1" x 1" x 1" (LF4701010) | |||||
ProPEX (LF) Brass to PB Coupling (PEX x PB) |
|||||||
1/2" x 1/2" (LF4585050) | 3/4" x 3/4" (LF4587575) | ||||||
ProPEX (LF) Brass to PE Coupling (PEX x PE) |
|||||||
1" x 1" (LF4591010) | |||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Fittings¢ § +++ [G] |
Brass |
Uponor Logo |
CSA B137.5 |
||||
Brass Adapter (PEX x Copper) |
|||||||
1/2" x 1/2" (LF4515050) | 1/2" x 1/2" (LF45150R) | 1/2" x 1/2" (LF45150R25) | 3/4" x 3/4" (LF4517575) | ||||
3/4" x 3/4" (LF45175R) | |||||||
Brass Elbow (MIP) |
|||||||
1/2" x 1/2" (LF4125050) | 1/2" x 1/2" (LF41250R) | ||||||
Brass Female Threaded Adapter (PEX x NPT) |
|||||||
1/2" x 1/2" (LF4575050/LF45750R/LF45750R10) | 3/4" x 3/4" (LF4577575) | 1" x 3/4" (LF4571075) | 1" x 1" (LF4571010) | ||||
1" x 1" (LF45710R) | 1 1/4" x 1 1/4" (LF4571313) | ||||||
Brass Fitting Adapter (PEX x Copper) |
|||||||
1/2" x 1/2" (LF4505050) | 1/2" x 1/2" (LF45050R) | 1/2" x 3/4" (LF4505075) | 3/4" x 3/4" (LF4507575) | ||||
3/4" x 3/4" (LF45075R) | 1" x 1" (LF4501010) | 1 1/4" x 1 1/4" (LF4501313) | |||||
Brass Male Threaded Adapter (PEX x NPT) |
|||||||
1/2" x 1/2" (LF4525050) | 3/4" x 3/4" (LF4527575) | 3/4" x 3/4" (LF45275R) | 1" x 1" (LF4521010) | ||||
1" x 1" (LF45210R) | 1 1/4" x 1 1/4" (LF4521313) | ||||||
Brass Sweat Adapter (PEX x Copper) |
|||||||
1/2" x 3/4" (LF4515075) | 1" x 1" (LF4511010) | 1" x 1" (LF45110R) | 1 1/4" x 1 1/4" (LF4511313) | ||||
Drop Ear Brass Elbow (PEX x FIP) |
|||||||
1/2" x 3/8" (LF4235038) | 1/2" x 1/2" (LF4235050) | 1/2" x 1/2" (LF42350R/LF42350R10) | 3/4" x 3/4" (LF4237575) | ||||
ProPEX (LF) Brass Adapter (PEX x Copper) |
|||||||
3/8" x 1/2" (LF4513850) | 3/4" x 1/2" (LF4517550) | 3/4" x 1" (LF4517510) | 1 1/2" x 1 1/2" (LF4511515) | ||||
2" x 2" (LF4512020) | |||||||
ProPEX (LF) Brass Coupling (PEX x PEX) |
|||||||
1/2" x 1/2" (LF4545050) | 1/2" x 3/4" (LF4545075) | 3/4" x 1" (LF4547510) | 1" x 1" (LF4541010) | ||||
1 1/4" x 1" (LF4541310) | 1 1/4" x 1 1/4" (LF4541313) | 1 1/2" x 1 1/4" (LF4541513) | 1 1/2" x 1 1/2" (LF4541515) | ||||
2" x 1 1/2" (LF4542015) | |||||||
ProPEX (LF) Brass Elbow (PEX x PEX) |
|||||||
3/4" x 3/4" (LF4710750) | 1" x 1" (LF4711000) | ||||||
ProPEX (LF) Brass Female Threaded Adapter(PEXxNPT) |
|||||||
1/2" x 3/4" (LF4575075) | 1/2" x 3/4" (LF4575075R) | 3/4" x 1" (LF4577510) | 1 1/2" x 1" (LF4571515) | ||||
2" x 2" (LF4572020) | |||||||
ProPEX (LF) Brass Fitting Adapter (PEX x Copper) |
|||||||
3/4" x 1/2" (LF4507550) | 3/4" x 1" (LF4507510) | 1 1/2" x 1 1/2" (LF4501515) | 2" x 2" (LF4502020) | ||||
ProPEX (LF) Brass Male Threaded Adapter(PEX x NPT) |
|||||||
3/8" x 1/2" (LF4523850) | 1/2" x 3/4" (LF4525075) | 1/2" x 3/4" (LF4525075R) | 3/4" x 1" (LF4527510) | ||||
3/4" x 1" (LF4527510R) | 1" x 3/4" (LF4521075) | 1" x 3/4" (LF4521075R) | 1 1/2" x 1 1/2" (LF4521515) | ||||
2" x 2" (LF4522020) | |||||||
ProPEX (LF) Brass Reducing Tee (PEX x PEX x PEX) |
|||||||
3/4" x 3/4" x 1/2" (LF4707550) | 3/4" x 3/4" x 1" (LF4707710) | 1" x 1" x 1/2" (LF4701150) | 1" x 3/4" x 3/4" (LF4701775) | ||||
1" x 1" x 3/4" (LF4701175) | 1" x 3/4" x 1" (LF4701751) | ||||||
ProPEX (LF) Brass Sweat Adapter |
|||||||
1/2" (LF4995050) | |||||||
ProPEX (LF) Brass Tee (PEX x PEX x PEX) |
|||||||
1/2" x 1/2" x 1/2" (LF4705050) | 3/4" x 3/4" x 3/4" (LF4707575) | 1" x 1" x 1" (LF4701010) | |||||
ProPEX (LF) Brass to PB Coupling (PEX x PB) |
|||||||
1/2" x 1/2" (LF4585050) | 3/4" x 3/4" (LF4587575) | ||||||
ProPEX (LF) Brass to PE Coupling (PEX x PB) |
|||||||
1" x 1" (LF4591010) | |||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Radiant Floor Heating
Product Type | Material Type | Trade Name | Product Standard | ||||
Fittings¢ |
Brass |
Uponor Logo |
ASTM F1960 |
||||
ProPEX Assembly, Commercial Manifold-R25 Thread |
|||||||
5/8" (Q4050625) | 3/4" (Q4050750) | 1" (Q4051000) | |||||
ProPEX Baseboard Elbow (PEX x Cu Adapter) |
|||||||
5/8" x 3/4" (Q4386375) | 3/4" x 3/4" (Q4387575) | ||||||
ProPEX Brass Coupling (PEX x PEX) |
|||||||
5/8" x 5/8" (Q4546363) | |||||||
ProPEX Brass Female Threaded Adapter (PEX x NPT) |
|||||||
5/8" x 3/4" (Q4576375) | |||||||
ProPEX Brass Fitting Adapter (PEX x Cu) |
|||||||
5/8" x 1/2" (Q4506350) | 5/8" x 3/4" (Q4506375) | ||||||
ProPEX Brass Male Threaded Adapter (PEX x NPT) |
|||||||
5/8" x 3/4" (Q4526375) | 3/4" x 1/2" (Q5527550) | ||||||
ProPEX Brass Plug (PEX) |
|||||||
5/8" (Q4536363) | |||||||
ProPEX Brass Sweat Adapter (PEX x Cu) |
|||||||
5/8" x 1/2" (Q4516350) | 5/8" x 3/4" (Q4516375) | ||||||
ProPEX Fitting Assembly, R20 Thread |
|||||||
1/2" (Q4020500) | 3/4" (Q4020750) | 5/8" (Q4020625) | 3/8" (Q4020375) | ||||
ProPEX Fitting Assembly, R25 Thread |
|||||||
3/4" (Q4030750) | 5/8" (Q4030625) | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
|||||||
Fittings¢ |
Brass |
Uponor Logo |
ASTM F877 |
||||
QS-Style Assembly, Commercial Manifold-R25 Thread |
|||||||
5/8" (A4050625) | 3/4" (A4050750) | ||||||
QS-style Compression Fitting Assembly, R20 thread |
|||||||
5/16" (A4020313) | 5/8" (A4020625) | 1/2" (A4020500) | 3/8" (A4020375) | ||||
QS-style Compression Fitting Assembly, R25 thread |
|||||||
3/4" (A4020750) | 5/8" (A4030625) | ||||||
Repair Coupling |
|||||||
5/16" (A4010313) | |||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
|||||||
Fittings¢ |
Brass |
Uponor Logo |
CSA B137.5 |
||||
QS-Style Assembly, Commercial Manifold-R25 Thread |
|||||||
5/8" (A4050625) | 3/4" (A4050750) | ||||||
QS-style Compression Fitting Assembly, R20 thread |
|||||||
1/2" (A4020500) | 5/16" (A4020313) | 5/8" (A4020625) | 3/8" (A4020375) | ||||
QS-style Compression Fitting Assembly, R25 thread |
|||||||
5/8" (A4030625) | 3/4" (A4020750) | ||||||
Repair Coupling |
|||||||
5/16" (A4010313) | |||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
|||||||
Fittings¢ |
Brass |
Uponor Logo |
CSA B137.5 |
||||
ProPEX Assembly, Commercial Manifold-R25 Thread |
|||||||
5/8" (Q4050625) | 3/4" (Q4050750) | 1" (Q4051000) | |||||
ProPEX Baseboard Elbow (PEX x Cu Adapter) |
|||||||
5/8" x 3/4" (Q4386375) | 3/4" x 3/4" (Q4387575) | ||||||
ProPEX Brass Coupling (PEX x PEX) |
|||||||
5/8" x 5/8" (Q4546363) | |||||||
ProPEX Brass Female Threaded Adapter (PEX x NPT) |
|||||||
5/8" x 3/4" (Q4576375) | |||||||
ProPEX Brass Fitting Adapter (PEX x Cu) |
|||||||
5/8" x 1/2" (Q4506350) | 5/8" x 3/4" (Q4506375) | ||||||
ProPEX Brass Male Threaded Adapter (PEX x NPT) |
|||||||
5/8" x 3/4" (Q4526375) | 3/4" x 1/2" (Q5527550) | ||||||
ProPEX Brass Plug (PEX) |
|||||||
5/8" (Q4536363) | |||||||
ProPEX Brass Sweat Adapter (PEX x Cu) |
|||||||
5/8" x 1/2" (Q4516350) | 5/8" x 3/4" (Q4516375) | ||||||
ProPEX Fitting Assembly, R20 Thread |
|||||||
5/8" (Q4020625) | 3/8" (Q4020375) | 3/4" (Q4020750) | 1/2" (Q4020500) | ||||
ProPEX Fitting Assembly, R25 thread |
|||||||
3/4" (Q4030750) | 5/8" (Q4030625) | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
Facility : Lincolnwood, IL
Potable Water - Pipe and Fittings
Product Type | Material Type | Trade Name | Product Standard | ||||
Fittings¢ § +++ [G] |
Brass |
Uponor Logo |
ASTM F1960 |
||||
Brass Adapter (PEX x Copper) |
|||||||
1/2" x 1/2" (LF4515050) | 1/2" x 1/2" (LF45150R) | 1/2" x 1/2" (LF45150R25) | 3/4" x 3/4" (LF4517575) | ||||
3/4" x 3/4" (LF45175R) | |||||||
Brass Fitting Adapter (PEX x Copper) |
|||||||
3/4" x 3/4" (LF4507575) | 3/4" x 3/4" (LF45075R) | ||||||
Brass Male Threaded Adapter (PEX x NPT) |
|||||||
1/2" x 1/2" (LF4525050) | 3/4" x 3/4" (LF4527575) | 3/4" x 3/4" (LF45275R) | 1" x 1" (LF4521010) | ||||
1" x 1" (LF45210R) | |||||||
Brass Sweat Adapter (PEX x Copper) |
|||||||
1" x 1" (LF4511010) | 1" x 1" (LF45110R) | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Fittings¢ § +++ [G] |
Brass |
Uponor Logo |
CSA B137.5 |
||||
Brass Adapter (PEX x Copper) |
|||||||
1/2" x 1/2" (LF4515050) | 1/2" x 1/2" (LF45150R) | 1/2" x 1/2" (LF45150R25) | 3/4" x 3/4" (LF4517575) | ||||
3/4" x 3/4" (LF45175R) | |||||||
Brass Fitting Adapter (PEX x Copper) |
|||||||
3/4" x 3/4" (LF4507575) | 3/4" x 3/4" (LF45075R) | ||||||
Brass Male Threaded Adapter (PEX x NPT) |
|||||||
1/2" x 1/2" (LF4525050) | 3/4" x 3/4" (LF4527575) | 3/4" x 3/4" (LF45275R) | 1" x 1" (LF4521010) | ||||
1" x 1" (LF45210R) | |||||||
Brass Sweat Adapter (PEX x Copper) |
|||||||
1" x 1" (LF4511010) | 1" x 1" (LF45110R) | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : Webster City, IA
Potable Water - Pipe and Fittings
Product Type | Material Type | Trade Name | Product Standard | ||||
Fittings! ¢ § +++ [G] |
MLTPL |
Uponor Logo |
ASTM F1960 |
||||
ProPEX EP Elbow Water Meter Connector (PEX x NPSM) |
|||||||
3/4" x 1" (WS4360751 and SWP4360751) | 1" x 1 1/4" (WS4361001) | ||||||
ProPEX EP Straight Water Meter Connector(PEXxNPSM) |
|||||||
3/4" x 1" (WS4360750 and SWP4360750 and WS4360750R) | 1" x 1 1/4" (WS4361000) | ||||||
! Product may or may not bear the NSF U.P. Code marking. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Fittings! ¢ § +++ [G] |
MLTPL |
Uponor Logo |
CSA B137.5 |
||||
ProPEX EP Elbow Water Meter Connector (PEX x NPSM) |
|||||||
3/4" x 1" (WS4360751 and SWP4360751) | 1" x 1 1/4" (WS4361001) | ||||||
ProPEX EP Straight Water Meter Connector(PEXxNPSM) |
|||||||
3/4" x 1" (WS4360750 and SWP4360750 and WS4360750R) | 1" x 1 1/4" (WS4361000) | ||||||
! Product may or may not bear the NSF U.P. Code marking. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Fittings! ¢ § +++ [G] |
SP |
Uponor Logo |
ASTM F1960 |
||||
ProPEX EP Coupling (PEX x PEX) |
|||||||
3/8" x 3/8" (Q4773838) | 3/8" x 1/2" (Q4773850) | 1/2" x 1/2" (Q4775050/Q47750R10/Q47750R25) | 5/8" x 5/8" (Q4776363) | ||||
3/4" x 3/4" (Q4777575/Q47775R5/Q47775R20) | 3/4" x 1" (Q4777510/Q4777510R5) | 1" x 1" (Q4771010/Q47710R5) | |||||
ProPEX EP Elbows (PEX x PEX) |
|||||||
1/2" x 1/2" (Q4760500/Q4760500R5/Q4760500R25) | 3/4" x 3/4" (Q4760750/Q4760750R5/Q4760750R10) | 1" x 1" (Q4761000/Q4761000R5) | |||||
ProPEX EP Fittings (Plugs) |
|||||||
1/2" (Q4350500/Q4350500R5/Q4350500R50) | |||||||
ProPEX EP Swivel Closet Adapter (PEX x Ballcock) |
|||||||
3/8" x 7/8" (Q4340375) | 1/2" x 7/8" (Q4340500) | ||||||
ProPEX EP Swivel Elbow (PEX x PEX) |
|||||||
1/2" x 1/2" (T4330500) | |||||||
ProPEX EP Swivel Faucet Adapter (PEX) |
|||||||
1/2" (Q4360500/Q4360500R5) | |||||||
ProPEX EP Tees (PEX x PEX x PEX) |
|||||||
1/2" x 1/2" x 1/2" (Q4755050/Q47550R5/Q47550R20) | 3/4" x 1/2" x 1/2" (Q4757555/Q4757555R5/Q4757555R10) | 3/4" x 1/2" x 3/4" (Q4757557/Q4757557R5/Q4757557R8) | 3/4" x 3/4" x 1/2" (Q4757550/Q4757550R5) | ||||
3/4" x 3/4" x 5/8" (Q4757563) | 3/4" x 3/4" x 3/4" (Q4757575/Q4757575R5) | 3/4" x 3/4" x 1" (Q4757710) | 1" x 3/4" x 1/2" (Q4751750) | ||||
1" x 3/4" x 3/4" (Q4751775) | 1" x 1/2" x 1" (Q4751501) | 1" x 3/4" x 1" (Q4751751/Q4751751R5) | 1" x 1" x 1/2" (Q4751150) | ||||
1" x 1" x 3/4" (Q4751175/Q4751175R5) | 1" x 1" x 1" (Q4751010) | 2" x 1" x 1" (Q4752110) | |||||
! Product may or may not bear the NSF U.P. Code marking. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Fittings! ¢ § +++ [G] |
SP |
Uponor Logo |
CSA B137.5 |
||||
ProPEX EP Coupling (PEX x PEX) |
|||||||
3/8" x 3/8" (Q4773838) | 3/8" x 1/2" (Q4773850) | 1/2" x 1/2" (Q4775050/Q47750R10/Q47750R25) | 5/8" x 5/8" (Q4776363) | ||||
3/4" x 3/4" (Q4777575/Q47775R5/Q47775R20) | 3/4" x 1" (Q4777510/Q4777510R5) | 1" x 1" (Q4771010/Q47710R5) | |||||
ProPEX EP Elbows (PEX x PEX) |
|||||||
1/2" x 1/2" (Q4760500/Q4760500R5/Q4760500R25) | 3/4" x 3/4" (Q4760750/Q4760750R5/Q4760750R10) | 1" x 1" (Q4761000/Q4761000R5) | |||||
ProPEX EP Fittings (Plugs) |
|||||||
1/2" (Q4350500/Q4350500R5/Q4350500R50) | |||||||
ProPEX EP Swivel Closet Adapter (PEX x Ballcock) |
|||||||
3/8" x 7/8" (Q4340375) | 1/2" x 7/8" (Q4340500) | ||||||
ProPEX EP Swivel Elbow (PEX x PEX) |
|||||||
1/2" x 1/2" (T4330500) | |||||||
ProPEX EP Swivel Faucet Adapter (PEX) |
|||||||
1/2" (Q4360500/Q4360500R5) | |||||||
ProPEX EP Tee (PEX x PEX x PEX) |
|||||||
1/2" x 1/2" x 1/2" (Q4755050/Q47550R5/Q47550R20) | 3/4" x 1/2" x 1/2" (Q4757555/Q4757555R5/Q4757555R10) | 3/4" x 1/2" x 3/4" (Q4757557/Q4757557R5/Q4757557R8) | 3/4" x 3/4" x 1/2" (Q4757550/Q4757550R5) | ||||
3/4" x 3/4" x 5/8" (Q4757563) | 3/4" x 3/4" x 3/4" (Q4757575/Q4757575R5) | 3/4" x 3/4" x 1" (Q4757710) | 1" x 3/4" x 1/2" (Q4751750) | ||||
1" x 3/4" x 3/4" (Q4751775) | 1" x 1/2" x 1" (Q4751501) | 1" x 3/4" x 1" (Q4751751/Q4751751R5) | 1" x 1" x 1/2" (Q4751150) | ||||
1" x 1" x 3/4" (Q4751175/Q4751175R5) | 1" x 1" x 1" (Q4751010) | 2" x 1" x 1" (Q4752110) | |||||
! Product may or may not bear the NSF U.P. Code marking. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : Apple Valley, MN
Fire Sprinkler Pipe and Fitting Systems
Product Type | Material Type | Trade Name | Product Standard | ||||
Pipe and Fitting System% ¢ ** |
MLTPL |
AQUASAFE®* |
ANSI/CAN/UL 1821 |
||||
Coupling |
|||||||
LF4545075 - ProPEX LF Brass Coupling, 1/2" PEX x 3/4" PEX | LF4547510 - ProPEX LF Brass Coupling, 3/4" PEX x 1" PEX | LF4547575 - ProPEX LF Brass Coupling, 3/4" PEX x 3/4" PEX | LF4541010 - ProPEX LF Brass Coupling, 1" PEX x 1" PEX | ||||
Q4777510/Q4777510R5 - ProPEX EP Coupling, 3/4" PEX x 1" PEX | Q4777575/Q47775R5/Q47775R20 - ProPEX EP Coupling, 3/4" PEX x 3/4" PEX | Q4771010/Q47710R5 - ProPEX EP Coupling, 1" PEX x 1" PEX | Q4771307 - ProPEX EP Coupling, 1 1/4" PEX x 3/4" PEX | ||||
Q4771310 - ProPEX EP Coupling, 1 1/4" PEX x 1" PEX | Q4771313 - ProPEX EP Coupling, 1 1/4" PEX x 1 1/4" PEX | ||||||
Elbow |
|||||||
LF4710500 - ProPEX LF Brass Elbow, 1/2" PEX x 1/2" PEX | LF4710750 - ProPEX LF Brass Elbow, 3/4" PEX x 3/4" PEX | LF4711000 - ProPEX LF Brass Elbow, 1" PEX x 1" PEX | Q4760500/Q4760500R5/Q4760500R25 - ProPEX EP Elbow, 1/2" PEX x 1/2" PEX | ||||
Q4760750/Q4760750R5/Q4760750R10 - ProPEX EP Elbow, 3/4" PEX x 3/4" PEX | Q4761000/Q4761000R5 - ProPEX EP Elbow, 1" PEX x 1" PEX | Q4761250 - ProPEX EP Elbow, 1 1/4" PEX x 1 1/4" PEX | Q4761515 - ProPEX 45 degree EP Elbow, 1-1/2" x 1-1/2" | ||||
Q4762020 - ProPEX 45 degree EP Elbow, 2" x 2" | |||||||
Female Adapter |
|||||||
LF4577575 - ProPEX LF Brass Female Threaded Adapter, 3/4" PEX x 3/4" NPT | LF4571010/LF45710R - ProPEX LF Brass Female Threaded Adapter, 1" PEX x 1" NPT | LF4571313 - ProPEX LF Brass Female Threaded Adapter, 1 1/4" PEX x 1 1/4" NPT | LF4571515 - ProPEX LF Brass Female Threaded Adapter, 1 1/2" PEX x 1 1/2" NPT | ||||
LF4572020 - ProPEX LF Brass Female Threaded Adapter, 2" PEX x 2" NPT | |||||||
Fire Sprinkler Head Adapter |
|||||||
LF7707575 - ProPEX LF Brass Fire Sprinkler Adapter Tee,¾" PEX x ¾" PEX x ½" FNPT | LF7701010 - ProPEX LF Brass Fire Sprinkler Adapter Tee,1" PEX x 1" PEX x ½: FNPT | LF7717550 - ProPEX LF Brass Fire Sprinkler Adapter Elbow, 3/4" PEX x 1/2" FNPT | LF7711050 - ProPEX LF Brass Fire Sprinkler Adapter Elbow, 1" PEX x 1/2" FNPT | ||||
Male Adapter |
|||||||
LF4527575/LF45275R - ProPEX LF Brass Male Threaded Adapter, 3/4" PEX x 3/4" NPT | LF4521010/LF45210R - ProPEX LF Brass Male Threaded Adapter, 1" PEX x 1" NPT | LF4521313 - ProPEX LF Brass Male Threaded Adapter, 1 1/4" PEX x 1 1/4" NPT | |||||
Opposing Port Tees |
|||||||
Q4801075 - ProPEX EP Opposing Port Tee, 1" PEXx1" PEXx3/4"PEXx3/4" PEX | Q4801375 - ProPEX EP Opposing Port Tee, 1 1/4" PEXx1 1/4" PEXx3/4" PEXx3/4" PEX | Q4801575 - ProPEX EP Opposing Port Tee-1 1/2" PEXx1 1/2" PEXx3/4" PEXx3/4" PEX | Q4802075 - ProPEX EP Opposing Port Tee-2" PEXx2" PEXx3/4"PEXx3/4" PEX | ||||
Plug |
|||||||
Q4350750/Q4350750R5 - ProPEX EP Plug, 3/4" PEX | Q4351000/Q4351000R5 - ProPEX EP Plug , 1" PEX | Q4351250 - ProPEX EP Plug, 1 1/4" | |||||
ProPEX Rings |
|||||||
Q4690756/Q4690756R10/Q4690756R30 - 3/4" ProPEX Ring with Stop | Q4691000/Q4691000R10 - 1" ProPEX Ring with Stop | Q4691250 - 1 1/4" ProPEX Ring with Stop | |||||
Reducing Tee |
|||||||
LF4707550 - ProPEX LF Brass Tee, 3/4" PEX x 3/4" PEX x 1/2" PEX | LF4707710 - ProPEX LF Brass Tee, 3/4" PEX x 3/4" PEX x 1" PEX | LF4701150 - ProPEX LF Brass Tee, 1" PEX x 1" PEX x 1/2" PEX | LF4701175 - ProPEX LF Brass Tee, 1" PEX x 1" PEX x 3/4" PEX | ||||
LF4701751 - ProPEX LF Brass Tee, 1" PEX x 3/4" PEX x 1" PEX | LF4701775 - ProPEX LF Brass Tee, 1" PEX x 3/4" PEX x 3/4" PEX | Q4757550/Q4757550R5 - ProPEX EP Reducing Tee, 3/4" PEX x 3/4" PEX x 1/2" PEX | Q4757557 - ProPEX EP Reducing Tee, 3/4" PEX x 1/2" PEX x 3/4" PEX | ||||
Q4757557R8 - ProPEX EP Reducing Tee, 3/4" PEX x 1/2" PEX x 3/4" PEX - copy | Q4757557 - ProPEX EP Reducing Tee, 3/4" PEX x 1/2" PEX x 3/4" PEX - copy | Q4757710 - ProPEX EP Reducing Tee, 3/4" PEX x 3/4" PEX x 1" PEX | Q4751113 - ProPEX EP Reducing Tee, 1" PEX x 1" PEX x 1 1/4" | ||||
Q4751150 - ProPEX EP Reducing Tee, 1" PEX x 1" PEX x 1/2" PEX | Q4751175/Q4751175R5 - ProPEX EP Reducing Tee, 1" PEX x 1" PEX x 3/4" PEX | Q4751311 - ProPEX EP Reducing Tee, 1 1/4" PEX x 1" PEX x 3/4" PEX | Q4751317 - ProPEX EP Reducing Tee, 1 1/4" PEX x 1" PEX x 1" PEX | ||||
Q4751331 - ProPEX EP Reducing Tee, 1 1/4" PEX x 1 1/4" PEX x 1" PEX | Q4751337 - ProPEX EP Reducing Tee, 1 1/4" PEX x 1 1/4" PEX x 3/4" PEX | Q4751371 - ProPEX EP Reducing Tee, 1 1/4" PEX x 3/4" PEX x 1" PEX | Q4751373 - ProPEX EP Reducing Tee, 1 1/4" PEX x 3/4" PEX x 1 1/4" PEX | ||||
Q4751377 - ProPEX EP Reducing Tee, 1 1/4" PEX x 3/4" PEX x 3/4" PEX | Q4751511 - ProPEX EP Reducing Tee, 1 1/2" PEX x 1" PEX x 1" PEX | Q4751517 - ProPEX EP Reducing Tee, 1 1/2" PEX x 1" PEX x 3/4" PEX | Q4751551 - ProPEX EP Reducing Tee, 1 1/2" PEX x 1 1/2" PEX x 3/4" PEX | ||||
Q4751553 - ProPEX EP Reducing Tee, 1 1/2" PEX x 1 1/2" PEX x 1 1/4" PEX | Q4751557 - ProPEX EP Reducing Tee, 1 1/2" PEX x 1 1/2" PEX x 1" PEX | Q4751751/Q4751751R5 - ProPEX EP Reducing Tee, 1" PEX x 3/4" PEX x 1" PEX | Q4751775 - ProPEX EP Reducing Tee, 1" PEX x 3/4" PEX x 3/4" PEX | ||||
Q47515501 - ProPEX EP Reducing Tee, 1/2" x 1-1/2" x 1/2" | Q4751350 - ProPEX EP Reducing Tee, 1-1/4" x 1-1/4" x 1/2" | Q4751505 - ProPEX EP Reducing Tee, 1-1/2" x 1" x 1-1/2" | Q4752152 - ProPEX EP Reducing Tee, 2" x 1-1/2" x 2" | ||||
Q4752250 - ProPEX EP Reducing Tee, 2" x 2" x 1/2" | |||||||
Sweat Adapter |
|||||||
LF4517575/LF45175R - ProPEX LF Brass Sweat Adapter, 3/4" PEX x 3/4" Copper | LF4511010/LF45110R - ProPEX LF Brass Sweat Adapter 1" PEX x 1" Copper | LF4511313 - ProPEX LF Brass Sweat Adapter, 1 1/4" PEX x 1 1/4" Copper | LF4511515 - ProPEX LF Brass Sweat Adapter, 1 1/2" PEX x 1 1/2" Copper | ||||
LF4512020 - ProPEX LF Brass Sweat Adapter, 2" PEX x 2" Copper | |||||||
Tee |
|||||||
LF4707575 - ProPEX LF Brass Tee, 3/4" PEX x 3/4" PEX x 3/4" PEX | LF4701010 - ProPEX LF Brass Tee, 1" PEX x 1" PEX x 1" PEX | Q4757575/Q4757575R5 - ProPEX EP Tee, 3/4" PEX x 3/4" PEX x 3/4" PEX | Q4751010 - ProPEX EP Tee, 1" PEX x 1" PEX x 1" PEX | ||||
Q4751313 - ProPEX EP Tee, 1 1/4" PEX x 1 1/4" PEX x 1 1/4" PEX | WS4360751/SWP4360751 - ProPEX EP Elbow Water Meter Connector, 3/4" PEX x 1" NPSM | WS4361001 - ProPEX EP Elbow Water Meter Connector, 1" PEX x 1 1/4" NPSM | WS4360750/SWP4360750- ProPEX EP Straight Water Meter Connector, 3/4" PEXx1" NPSM | ||||
WS4360750R - ProPEX EP Straight Water Meter Connector, 3/4" PEXx1" NPSM | WS4361000 - ProPEX EP Straight Water Meter Connector, 1" PEX x 1 1/4" NPSM | ||||||
Tubing |
|||||||
3/4" Uponor AquaPEX White | 1" Uponor AquaPEX White | 1 1/4" Uponor AquaPEX White | |||||
% PEX pipe and fittings are intended for use in multi-purpose piping systems of residential occupancies as defined in ANSI/NFPA 13D, "Installation of Sprinkler Systems in One- and Two- Family Dwellings and Manufactured Homes", the National Building Code of Canada, and the International Residential Code, Section 2904, and are designed to withstand a working pressure of not less than 130 psi at 120° F. PEX pipe and fittings are intended to be installed in accordance with the requirements specified in the manufacturer’s installation instructions and ANSI/NFPA 13D. Protection is intended to be provided for PEX pipe and fittings in multi-purpose piping systems. The minimum protection should consist of either (1) one layer of 3/8-in. gypsum wallboard, (2) a suspended membrane ceiling with lay-in panels or tiles having a weight of not less than 0.35 lbs per sq ft when installed with metallic support grids, (3) 1/2 in plywood or (4) other material with a 15 minute fire rating. PEX pipe and fittings are intended for use in areas where the maximum ambient temperature does not exceed 120° F. These pipe and fittings are not intended to be installed in outdoor applications. The PEX pipe and fittings are intendedfor use in wet-pipe systems only and have not been evaluated for use in dry-pipe systems. * These products may also be represented by the trade name AquaPEX. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. ** Pipe and fittings Certified as a system using installation and design manual titled "Uponor Residential Fire Sprinkler Systems, AquaSAFE™ System Installation Guide". |
Potable Water - Pipe and Fittings
Product Type | Material Type | Trade Name | Product Standard | ||||
Pipe* ^ ¢ § +++ [3] [5] [G] |
PEX 5106 |
AquaPEX (Natural) |
ASTM F876/F877 |
||||
1/4" - 3" SDR 9 | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Product may or may not bear the U.P. Code mark. [5] May also use the trade names AquaPEX Natural, AquaPEX White, or AquaPEX Clear. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Pipe* ^ ¢ +++ [2] [5] [G] |
PEX 5106 |
AquaPEX (Natural) |
CSA B137.5 |
||||
1/4" - 3" SDR 9 | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASSE 1061 (3/8" - 2" only), ASTM F1960, ASTM F1807, and ASTM F2098. [5] May also use the trade names AquaPEX Natural, AquaPEX White, or AquaPEX Clear. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Pipe* ^ ¢ § +++ [3] [4] [G] |
PEX 5306 |
AquaPEX (Red or Blue) |
ASTM F876/F877 |
||||
1/2" - 2" SDR 9 | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Product may or may not bear the U.P. Code mark. [4] Pipe may be marked PEX 5306, PEX 5206, or PEX 5106. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Pipe* ^ ¢ +++ [1] [4] [G] |
PEX 5306 |
AquaPEX (Red or Blue) |
CSA B137.5 |
||||
1/2" - 2" SDR 9 | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASSE 1061 (1/2" - 2" only), ASTM F1960, ASTM F1807, and ASTM F2098. [4] Pipe may be marked PEX 5306, PEX 5206, or PEX 5106. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Pipe* ^ ¢ § +++ [3] [G] |
PEX 5306 |
AquaPEX (Red or Blue) |
AWWA C904 |
||||
1/2" - 2" SDR 9 | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Product may or may not bear the U.P. Code mark. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Pipe* ^ ¢ § +++ [3] [4] [G] |
PEX 5306 |
ServicePEX (Blue) |
ASTM F876/F877 |
||||
1/2" - 2" SDR 9 | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Product may or may not bear the U.P. Code mark. [4] Pipe may be marked PEX 5306, PEX 5206, or PEX 5106. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Pipe* ^ ¢ +++ [1] [4] [G] |
PEX 5306 |
ServicePEX (Blue) |
CSA B137.5 |
||||
1/2" - 2" SDR 9 | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASSE 1061 (1/2" - 2" only), ASTM F1960, ASTM F1807, and ASTM F2098. [4] Pipe may be marked PEX 5306, PEX 5206, or PEX 5106. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Pipe* ^ ¢ § +++ [3] [G] |
PEX 5306 |
ServicePEX (Blue) |
AWWA C904 |
||||
1/2" - 2" SDR 9 | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Product may or may not bear the U.P. Code mark. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Pipe^ ¢ § ** +++ [3] [6] [G] |
PEX 5106 |
ResiPEX™ (Natural) |
ASTM F876/F877 |
||||
1/2" - 1" SDR 9 | |||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ** Accepted by NSF for use in residential construction, including manufactured housing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Product may or may not bear the U.P. Code mark. [6] May also use the trade names ResiPEX Natural, ResiPEX White, or ResiPEX Clear. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Pipe^ ¢ ** +++ [1] [6] [G] |
PEX 5106 |
ResiPEX™ (Natural) |
CSA B137.5 |
||||
1/2" - 1" SDR 9 | |||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. ** Accepted by NSF for use in residential construction, including manufactured housing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASSE 1061 (1/2" - 2" only), ASTM F1960, ASTM F1807, and ASTM F2098. [6] May also use the trade names ResiPEX Natural, ResiPEX White, or ResiPEX Clear. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Pipe* ^ ¢ § +++ [3] [G] |
PEX 5106 |
hePEX |
ASTM F876/F877 |
||||
5/16" - 4" SDR 9 | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Product may or may not bear the U.P. Code mark. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Pipe* ^ ¢ +++ [2] [G] |
PEX 5106 |
hePEX |
CSA B137.5 |
||||
5/16" - 4" SDR 9 | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASSE 1061 (3/8" - 2" only), ASTM F1960, ASTM F1807, and ASTM F2098. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Reinforcing Rings¢ [7] [8] |
PEX |
Uponor Logo |
ASTM F1960 |
||||
ProPEX Ring |
|||||||
3/8" (Q4690302) | |||||||
ProPEX Ring with Stop |
|||||||
1/2" (Q4690512/Q4690512R10/Q4690512R50) | 5/8" (Q4690625) | 3/4" (Q4690756/Q4690756R10/Q4690756R30) | 1" (Q4691000/Q4691000R10) | ||||
1 1/4" (Q4691250) | 1 1/2" (Q4691500) | 2" (Q4692000) | 2 1/2" (Q4692500) | ||||
3" (Q4693000) | |||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [7] Product does not have water contact. [8] Specifically for use with Uponor fittings. |
|||||||
Reinforcing Rings¢ [7] [8] |
PEX |
Uponor Logo |
CSA B137.5 |
||||
ProPEX Ring |
|||||||
3/8" (Q4690302) | |||||||
ProPEX Ring with Stop |
|||||||
1/2" (Q4690512/Q4690512R10/Q4690512R50) | 5/8" (Q4690625) | 3/4" (Q4690756/Q4690756R10/Q4690756R30) | 1" (Q4691000/Q4691000R10) | ||||
1 1/4" (Q4691250) | 1 1/2" (Q4691500) | 2" (Q4692000) | 2 1/2" (Q4692500) | ||||
3" (Q4693000) | |||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [7] Product does not have water contact. [8] Specifically for use with Uponor fittings. |
Reclaimed Water - Pipe and Fittings
Product Type | Material Type | Trade Name | Product Standard | |||
Tubing* ¢ [1] [2] |
PEX 5106 |
AquaPEX Reclaimed Water |
ASTM F876/F877 |
|||
1/2" - 4" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] This product is intended for reclaimed water end use, and is marked "not for potable water" or "NON-POTABLE WATER, DO NOT DRINK". This product has an outer purple coating. [2] Product meets the most current dimensional requirements of ASTM F876. |
||||||
Tubing* ¢ [1] [3] [4] |
PEX |
AquaPEX Reclaimed Water |
CSA B137.5 |
|||
1/2" - 4" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] This product is intended for reclaimed water end use, and is marked "not for potable water" or "NON-POTABLE WATER, DO NOT DRINK". This product has an outer purple coating. [3] Product meets applicable requirements of CSA B128.1. Listing does not preclude onsite inspection, system design and testing of the reclaimed water system. [4] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASSE 1061 (1/2"-2" only), ASTM F1960, ASTM F1807, and ASTM F2098. |
Radiant Floor Heating
Product Type | Material Type | Trade Name | Product Standard | ||||
Tubing* ^ ¢ § [1] |
PEX 5106 |
hePEX |
ASTM F876/F877 |
||||
5/16" - 4" | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Product may or may not bear the U.P.Code mark. |
|||||||
Tubing* ^ ¢ [2] |
PEX 5106 |
hePEX |
CSA B137.5 |
||||
5/16" - 4" | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [2] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1960, ASTM F1807, and ASTM F2098. |
|||||||
Tubing* |
PEX |
EcoFlex |
ASTM F2788 |
||||
110 mm | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. |
|||||||
Tubing* @ ¢ [3] |
PEX 0006 |
hePEX |
ASTM F876/F877 |
||||
5/16" | 3/8" | 1/2" | 5/8" | ||||
3/4" | 1" | 1 1/4" | 1 1/2" | ||||
2" | 2 1/2" | 3" | 3 1/2" | ||||
4" | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ This barrier tubing product has been evaluated against the performance requirement of ASTM F876/F877. This product has been evaluated for use in radiant floor heating. (NSF-rfh), applications only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [3] Product meets the most current dimensional requirements of ASTM F876. |
|||||||
Tubing* @ ¢ [4] |
PEX |
hePEX |
CSA B137.5 |
||||
5/16" | 3/8" | 1/2" | 5/8" | ||||
3/4" | 1" | 1 1/4" | 1 1/2" | ||||
2" | 2 1/2" | 3" | 3 1/2" | ||||
4" | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ This barrier tubing product has been evaluated against the performance requirement of ASTM F876/F877. This product has been evaluated for use in radiant floor heating. (NSF-rfh), applications only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [4] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASSE 1061 (3/8"-2" only), ASTM F1960, ASTM F1807, and ASTM F2098. |
|||||||
Pipe/Fittings Assembly¥ [5] |
MLTPL |
Uponor Logo |
ASTM F877 |
||||
Radiant Rollout™ Mat |
|||||||
1/2" | 5/8" | ||||||
¥ Product is Certified to the Uniform Mechanical Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Mechanical Code™. [5] Product may or may not bear the U.M.Code mark. |
|||||||
Tubing* @ § |
PEX 0306 |
helioPEX™ X2 |
ASTM F876/F877 |
||||
5/16" | 3/8" | 1/2" | 5/8" | ||||
3/4" | 1" | 1 1/4" | 1 1/2" | ||||
2" | 2 1/2" | 3" | 3 1/2" | ||||
4" | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ This barrier tubing product has been evaluated against the performance requirement of ASTM F876/F877. This product has been evaluated for use in radiant floor heating. (NSF-rfh), applications only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||||||
Tubing* @ ¢ [4] |
PEX 0306 |
helioPEX™ X2 |
CSA B137.5 |
||||
5/16" | 3/8" | 1/2" | 5/8" | ||||
3/4" | 1" | 1 1/4" | 1 1/2" | ||||
2" | 2 1/2" | 3" | 3 1/2" | ||||
4" | |||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ This barrier tubing product has been evaluated against the performance requirement of ASTM F876/F877. This product has been evaluated for use in radiant floor heating. (NSF-rfh), applications only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [4] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASSE 1061 (3/8"-2" only), ASTM F1960, ASTM F1807, and ASTM F2098. |
Facility : Circle Pines, MN
Potable Water - Pipe and Fittings
Product Type | Material Type | Trade Name | Product Standard | ||||
Manifolds! ¢ § +++ [G] |
SP |
Uponor Logo |
ASTM F1960 |
||||
1 x 3/4" F/T Manifold with ProPEX Outlets |
|||||||
4 Outlet (1/2") (Q2241057) | 6 Outlet (1/2") (Q2261057) | ||||||
1" EP Branch Elbow Commercial Multi-port Tee |
|||||||
10 outlets (1/2") (Q2101000) | |||||||
1" EP Branch Multi-port Tee |
|||||||
7 Outlets with mounting clips (Q2271051) | 8 Outlets with mounting clips (Q2281051) | 10 outlets (1/2") with mounting clips (Q2101051) | 12 outlets (1/2") with mounting clips (Q2121051) | ||||
1" Manifold with 1" ProPEX End x ProPEX Outlet |
|||||||
6 Outlets (1/2") (Q2261050) | |||||||
1" Manifold with two 1" ProPEX Ends x ProPEX Outle |
|||||||
6 Outlets (1/2") (Q2261051) | |||||||
3/4" Branch Manifold |
|||||||
3 Outlets (Q2237550/Q2237550R) | 4 Outlets (Q2247550/Q2247550R) | 6 Outlets (Q2267550/Q2267550R) | |||||
3/4" EP Branch Commercial Multi-Port Tee |
|||||||
7 outlets (1/2") (Q2277550) | 8 outlets (1/2") (Q2287550) | ||||||
3/4" EP Branch Elbow Commercial Multi-port Tee |
|||||||
7 outlets (1/2") (Q2077550) | 8 outlets (1/2") (Q2087550) | ||||||
3/4" EP Branch Multi-Port Tee |
|||||||
6 outlets (Q2267550/Q2267550R) | |||||||
3/4" EP Branch Opposing Port Multi-Port Tee |
|||||||
3 Outlets (1/2") (Q2337550) | 4 Outlets (1/2") (Q2347550) | 8 Outlets (1/2") (Q2387550) | |||||
3/4" Manifold-two 3/4" ProPEX EndsxProPEX Outlets |
|||||||
2 Outlets (1/2'') (Q2227557/Q2227557R) | 3 Outlets (1/2") (Q2237557/Q2237557R) | 4 Outlets (1/2") (Q2247557/Q2247557R) | |||||
3/4" x 3/4" EP F/T Multi-Port Elbow ProPEX |
|||||||
3 outlets (Q2235577) | |||||||
3/4" x 3/4" EP F/T Multi-Port Tee ProPEX |
|||||||
6 outlets (Q2267557) | |||||||
3/4" x 3/4" EP F/T Multi-Port Tee Q&E/ProPEX |
|||||||
4 outlets (Q2247557/Q2247557R) | |||||||
3/4" x 3/4" ProPEX Flow through Manifold |
|||||||
6 Outlets (Q2267557) | |||||||
3/4"x3/4" EP F/T Roll-out Multi-Port Elbow ProPEX |
|||||||
4 outlets (Q2245577) | |||||||
3/4"x3/4" ProPEX Flow-Thru Opp Port Multi-Port Tee |
|||||||
3 Outlets (1/2") (Q2337557) | 4 Outlets (1/2") (Q2347557) | 6 Outlets (1/2") (Q2367557) | |||||
3/4"x3/4"x3/4" Rollout Multi-Port Vert Tee ProPEX |
|||||||
3 outlets (Q2237757) | 4 outlets (Q2247757) | ||||||
3/4"x3/4x 3/4" Rollout Multi-Port Horiz Tee ProPEX |
|||||||
4 outlets (Q2247577) | |||||||
EP Branch Multi-port Tee, 3 (3/4") outlets |
|||||||
1 1/4" PEX (Q2231375) | |||||||
EP Branch Multi-Port Tee, 4 outlets (1/2") |
|||||||
1" PEX (Q2241050) | |||||||
EP Flow-through Multi-port Tee, 3 (1") outlets |
|||||||
2" PEX x 2" PEX (Q2232102) | |||||||
EP Flow-through Multi-port Tee, 3 (3/4") outlets |
|||||||
1 1/4" x 1 1/4" PEX (Q2231373) | |||||||
EP Flow-through Multi-port Tee, 3 outlets (1/2") |
|||||||
1" PEX x 3/4" PEX (Q2231057) | |||||||
EP Flow-through Multi-port Tee, 4 outlets (1/2") |
|||||||
1" PEX x 1" PEX (Q2241051) | |||||||
! Product may or may not bear the NSF U.P. Code marking. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Fittings! ¢ § +++ [G] |
SP |
Uponor Logo |
ASTM F1960 |
||||
Couplings |
|||||||
1/2" x 1/2" (Q4775050/Q47750R10/Q47750R25) | 1/2" x 3/4" (Q4775075/Q4775075R5/Q4775075R25) | 3/4" x 3/4" (Q4777575/Q47775R5/Q47775R20) | 3/4" x 1" (Q4777510/Q4777510R5) | ||||
1" x 1" (Q4771010/Q47710R5) | 2 1/2" x 1 1/4" (Q4772513) | 2 1/2" x 1 1/2" (Q4772515) | 2 1/2" x 2" (Q4772520) | ||||
2 1/2" x 2 1/2" (Q4772525) | 3" x 2" (Q4773020) | 3" x 2 1/2" (Q4773025) | 3" x 3" (Q4773030) | ||||
Elbows |
|||||||
1/2" (Q4760500/Q4760500R5/Q4760500R25) | 3/4" (Q4760750/Q4760750R5/Q4760750R10) | 1" (Q4761000/Q4761000R5) | 1 1/4" (Q4711250) | ||||
1 1/2" (Q4711500) | 2 1/2" x 2 1/2" (Q4762500) | 3" x 3" (Q4763000 or 1085080) | |||||
Plugs |
|||||||
3/8" (Q4350375) | 1/2" (Q4350500/Q4350500R5/Q4350500R50) | 3/4" (Q4350750) | 1" (Q4351000/Q4351000R5) | ||||
ProPEX EP 45 Elbow |
|||||||
1 1/2" PEX x 1 1/2" PEX (Q4761515) | 2" PEX x 2" PEX (Q4762020) | 2 1/2" PEX x 2 1/2" PEX (Q4762525) | 3" PEX x 3" PEX (Q4763030) | ||||
ProPEX EP Fire Sprinkler Tee |
|||||||
3/4" x 3/4" 3/4" (FS4757575) | 3/4" x 3/4" x 1" (FS4757710) | 1" x 1" x 3/4" (FS4751175) | 1" x 1" x 1" (FS4751010) | ||||
Reducing Tees |
|||||||
1/2" x 1/2" x 3/4" (Q4755575/Q4755575R5) | 3/4" x 1/2" x 1/2" (Q4757555/Q4757555R5/Q4757555R10) | 3/4" x 1/2" x 3/4" (Q4757557/Q4757557R5/Q4757557R8) | 3/4" x 3/4" x 1/2" (Q4757550/Q4757550R5) | ||||
3/4" x 3/4" x 1" (Q4757710) | 1" x 3/4" x 3/4" (Q4751775) | 1" x 3/4" x 1" (Q4751751/Q4751751R5) | 1" x 1" x 1/2" (Q4751150) | ||||
1" x 1" x 3/4" (Q4751175/Q4751175R5) | 1 1/4" x 1" x 3/4" (Q4751317) | 1 1/4" x 1" x 1" (Q4751311) | 1 1/4" x 1 1/4" x 1/2" (Q4751350) | ||||
1 1/4" x 1 1/4" x 3/4" (Q4751337) | 1 1/4" x 1 1/4" x 1" (Q4751331) | 1 1/2" x 1" x 3/4" (Q4751517) | 1 1/2" x 1" x 1" (Q4751511) | ||||
1 1/2" x 1" x 1 1/2" (Q4751505) | 1 1/2" x 1 1/2" x 1/2" (Q4751550) | 1 1/2" x 1 1/2" x 3/4" (Q4751557) | 1 1/2" x 1 1/2" x 1" (Q4751551) | ||||
1 1/2" x 1 1/2" x 1 1/4" (Q4751553) | 2" x 1 1/2" x 1/2" (Q4752152) | 2" x 2" x 1/2" (Q4752250) | 2 1/2" x 2" x 1 1/2" (Q4752525) | ||||
2 1/2" x 2" x 2" (Q4752522) | 2 1/2" x 2 1/2" x 3/4" (Q4752557) | 2 1/2" x 2 1/2" x 1" (Q4752510) | 2 1/2" x 2 1/2" x 1 1/4" (Q4752513) | ||||
2 1/2" x 2 1/2" x 1 1/2" (Q4752515) | 2 1/2" x 2 1/2" x 2" (Q4752520) | ||||||
Tees |
|||||||
1/2" x 1/2" x 1/2" (Q4755050/Q47550R5/Q47550R20) | 3/4" x 3/4" x 3/4" (Q4757575/Q4757575R5) | 1" x 1" x 1" (Q4751010) | 1 1/2" x 1 1/2" x 1 1/2" (Q4751515) | ||||
2 1/2" x 2 1/2" x 2 1/2" (Q4752500) | |||||||
! Product may or may not bear the NSF U.P. Code marking. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Manifolds! ¢ § +++ [G] |
PLS |
Uponor Logo |
CSA B137.5 |
||||
1 x 3/4" F/T Manifold with ProPEX Outlets |
|||||||
4 Outlet (1/2") (Q2241057) | 6 Outlet (1/2") (Q2261057) | ||||||
1" EP Branch Elbow Commercial Multi-port Tee |
|||||||
10 outlets (1/2") (Q2101000) | |||||||
1" EP Branch Multi-port Tee |
|||||||
7 Outlets with mounting clips (Q2271051) | 8 Outlets with mounting clips (Q2281051) | 10 outlets (1/2") with mounting clips (Q2101051) | 12 outlets (1/2") with mounting clips (Q2121051) | ||||
1" Manifold with 1" ProPEX End x ProPEX Outlet |
|||||||
6 Outlets (1/2") (Q2261050) | |||||||
1" Manifold with two 1" ProPEX Ends x ProPEX Outle |
|||||||
6 Outlets (1/2") (Q2261051) | |||||||
3/4" Branch Manifold |
|||||||
3 Outlets (Q2237550/Q2237550R) | 4 Outlets (Q2247550/Q2247550R) | 6 Outlets (Q2267550/Q2267550R) | |||||
3/4" EP Branch Commercial Multi-Port Tee |
|||||||
7 outlets (1/2") (Q2277550) | 8 outlets (1/2") (Q2287550) | ||||||
3/4" EP Branch Elbow Commercial Multi-port Tee |
|||||||
7 outlets (1/2") (Q2077550) | 8 outlets (1/2") (Q2087550) | ||||||
3/4" EP Branch Multi-Port Tee |
|||||||
6 outlets (Q2267550/Q2267550R) | |||||||
3/4" EP Branch Opposing Port Multi-Port Tee |
|||||||
3 Outlets (1/2") (Q2337550) | 4 Outlets (1/2") (Q2347550) | 8 Outlets (1/2") (Q2387550) | |||||
3/4" Manifold-two 3/4" ProPEX EndsxProPEX Outlets |
|||||||
2 Outlets (1/2'') (Q2227557/Q2227557R) | 3 Outlets (1/2") (Q2237557/Q2237557R) | 4 Outlets (1/2") (Q2247557/Q2247557R) | |||||
3/4" x 3/4" EP F/T Multi-Port Elbow ProPEX |
|||||||
3 outlets (Q2235577) | |||||||
3/4" x 3/4" EP F/T Multi-Port Tee ProPEX |
|||||||
6 outlets (Q2267557) | |||||||
3/4" x 3/4" EP F/T Multi-Port Tee Q&E/ProPEX |
|||||||
4 outlets (Q2247557/Q2247557R) | |||||||
3/4" x 3/4" ProPEX Flow through Manifold |
|||||||
6 Outlets (Q2267557) | |||||||
3/4"x3/4" EP F/T Roll-out Multi-Port Elbow ProPEX |
|||||||
4 outlets (Q2245577) | |||||||
3/4"x3/4" ProPEX Flow-Thru Opp Port Multi-Port Tee |
|||||||
3 Outlets (1/2") (Q2337557) | 4 Outlets (1/2") (Q2347557) | 6 Outlets (1/2") (Q2367557) | |||||
3/4"x3/4"x3/4" Rollout Multi-Port Vert Tee ProPEX |
|||||||
3 outlets (Q2237757) | 4 outlets (Q2247757) | ||||||
3/4"x3/4x 3/4" Rollout Multi-Port Horiz Tee ProPEX |
|||||||
4 outlets (Q2247577) | |||||||
EP Branch Multi-port Tee, 3 (3/4") outlets |
|||||||
1 1/4" PEX (Q2231375) | |||||||
EP Branch Multi-Port Tee, 4 outlets (1/2") |
|||||||
1" PEX (Q2241050) | |||||||
EP Flow-through Multi-port Tee, 3 (1") outlets |
|||||||
2" PEX x 2" PEX (Q2232102) | |||||||
EP Flow-through Multi-port Tee, 3 (3/4") outlets |
|||||||
1 1/4" x 1 1/4" PEX (Q2231373) | |||||||
EP Flow-through Multi-port Tee, 3 outlets (1/2") |
|||||||
1" PEX x 3/4" PEX (Q2231057) | |||||||
EP Flow-through Multi-port Tee, 4 outlets (1/2") |
|||||||
1" PEX x 1" PEX (Q2241051) | |||||||
! Product may or may not bear the NSF U.P. Code marking. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Manifolds! ¢ § +++ [G] |
SP |
Uponor Logo |
ASTM F877 |
||||
1 x 3/4" F/T Manifold with ProPEX Outlets |
|||||||
4 Outlet (1/2") (Q2241057) | 6 Outlet (1/2") (Q2261057) | ||||||
1" EP Branch Elbow Commercial Multi-port Tee |
|||||||
10 outlets (1/2") (Q2101000) | |||||||
1" EP Branch Multi-port Tee |
|||||||
7 Outlets with mounting clips (Q2271051) | 8 Outlets with mounting clips (Q2281051) | 10 outlets (1/2") with mounting clips (Q2101051) | 12 outlets (1/2") with mounting clips (Q2121051) | ||||
1" Manifold with 1" ProPEX End x ProPEX Outlet |
|||||||
6 Outlets (1/2") (Q2261050) | |||||||
1" Manifold with two 1" ProPEX Ends x ProPEX Outle |
|||||||
6 Outlets (1/2") (Q2261051) | |||||||
3/4" Branch Manifold |
|||||||
3 Outlets (Q2237550/Q2237550R) | 4 Outlets (Q2247550/Q2247550R) | 6 Outlets (Q2267550/Q2267550R) | |||||
3/4" EP Branch Commercial Multi-Port Tee |
|||||||
7 outlets (1/2") (Q2277550) | 8 outlets (1/2") (Q2287550) | ||||||
3/4" EP Branch Elbow Commercial Multi-port Tee |
|||||||
7 outlets (1/2") (Q2077550) | 8 outlets (1/2") (Q2087550) | ||||||
3/4" EP Branch Multi-Port Tee |
|||||||
6 outlets (Q2267550/Q2267550R) | |||||||
3/4" EP Branch Opposing Port Multi-Port Tee |
|||||||
3 Outlets (1/2") (Q2337550) | 4 Outlets (1/2") (Q2347550) | 8 Outlets (1/2") (Q2387550) | |||||
3/4" Manifold-two 3/4" ProPEX EndsxProPEX Outlets |
|||||||
2 Outlets (1/2'') (Q2227557/Q2227557R) | 3 Outlets (1/2") (Q2237557/Q2237557R) | 4 Outlets (1/2") (Q2247557/Q2247557R) | |||||
3/4" x 3/4" EP F/T Multi-Port Elbow ProPEX |
|||||||
3 outlets (Q2235577) | |||||||
3/4" x 3/4" EP F/T Multi-Port Tee ProPEX |
|||||||
6 outlets (Q2267557) | |||||||
3/4" x 3/4" EP F/T Multi-Port Tee Q&E/ProPEX |
|||||||
4 outlets (Q2247557/Q2247557R) | |||||||
3/4" x 3/4" ProPEX Flow through Manifold |
|||||||
6 Outlets (Q2267557) | |||||||
3/4"x3/4" EP F/T Roll-out Multi-Port Elbow ProPEX |
|||||||
4 outlets (Q2245577) | |||||||
3/4"x3/4" ProPEX Flow-Thru Opp Port Multi-Port Tee |
|||||||
3 Outlets (1/2") (Q2337557) | 4 Outlets (1/2") (Q2347557) | 6 Outlets (1/2") (Q2367557) | |||||
3/4"x3/4"x3/4" Rollout Multi-Port Vert Tee ProPEX |
|||||||
3 outlets (Q2237757) | 4 outlets (Q2247757) | ||||||
3/4"x3/4x 3/4" Rollout Multi-Port Horiz Tee ProPEX |
|||||||
4 outlets (Q2247577) | |||||||
EP Branch Multi-port Tee, 3 (3/4") outlets |
|||||||
1 1/4" PEX (Q2231375) | |||||||
EP Branch Multi-Port Tee, 4 outlets (1/2") |
|||||||
1" PEX (Q2241050) | |||||||
EP Flow-through Multi-port Tee, 3 (1") outlets |
|||||||
2" PEX x 2" PEX (Q2232102) | |||||||
EP Flow-through Multi-port Tee, 3 (3/4") outlets |
|||||||
1 1/4" x 1 1/4" PEX (Q2231373) | |||||||
EP Flow-through Multi-port Tee, 3 outlets (1/2") |
|||||||
1" PEX x 3/4" PEX (Q2231057) | |||||||
EP Flow-through Multi-port Tee, 4 outlets (1/2") |
|||||||
1" PEX x 1" PEX (Q2241051) | |||||||
! Product may or may not bear the NSF U.P. Code marking. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Fittings! ¢ § +++ [G] |
SP |
Uponor Logo |
CSA B137.5 |
||||
Couplings |
|||||||
1/2" x 1/2" (Q4775050/Q47750R10/Q47750R25) | 1/2" x 3/4" (Q4775075/Q4775075R5/Q4775075R25) | 3/4" x 3/4" (Q4777575/Q47775R5/Q47775R20) | 3/4" x 1" (Q4777510/Q4777510R5) | ||||
1" x 1" (Q4771010/Q47710R5) | 2 1/2" x 1 1/4" (Q4772513) | 2 1/2" x 1 1/2" (Q4772515) | 2 1/2" x 2" (Q4772520) | ||||
2 1/2" x 2 1/2" (Q4772525) | 3" x 2" (Q4773020) | 3" x 2 1/2" (Q4773025) | 3" x 3" (Q4773030) | ||||
Elbows |
|||||||
1/2" (Q4760500/Q4760500R5/Q4760500R25) | 3/4" (Q4760750/Q4760750R5/Q4760750R10) | 1" (Q4761000/Q4761000R5) | 1 1/4" (Q4711250) | ||||
1 1/2" (Q4711500) | 2 1/2" x 2 1/2" (Q4762500) | 3" x 3" (Q4763000 or 1085080) | |||||
Plugs |
|||||||
3/8" (Q43550375) | 1/2" (Q4350500/Q4350500R5/Q4350500R50) | 3/4" (Q4350750) | 1" (Q4351000/Q4351000R5) | ||||
ProPEX EP 45 Elbow |
|||||||
1 1/2" PEX x 1 1/2" PEX (Q4761515) | 2" PEX x 2" PEX (Q4762020) | 2 1/2" PEX x 2 1/2" PEX (Q4762525) | 3" PEX x 3" PEX (Q4763030) | ||||
ProPEX EP Fire Sprinkler Tee |
|||||||
3/4" x 3/4" 3/4" (FS4757575) | 3/4" x 3/4" x 1" (FS4757710) | 1" x 1" x 3/4" (FS4751175) | 1" x 1" x 1" (FS4751010) | ||||
Reducing Tees |
|||||||
1/2" x 1/2" x 3/4" (Q4755575/Q4755575R5) | 3/4" x 1/2" x 1/2" (Q4757555/Q4757555R5/Q4757555R10) | 3/4" x 1/2" x 3/4" (Q4757557/Q4757557R5/Q4757557R8) | 3/4" x 3/4" x 1/2" (Q4757550/Q4757550R5) | ||||
3/4" x 3/4" x 1" (Q4757710) | 1" x 3/4" x 3/4" (Q4751775) | 1" x 3/4" x 1" (Q4751751/Q4751751R5) | 1" x 1" x 1/2" (Q4751150) | ||||
1" x 1" x 3/4" (Q4751175/Q4751175R5) | 1 1/4" x 1" x 3/4" (Q4751317) | 1 1/4" x 1" x 1" (Q4751311) | 1 1/4" x 1 1/4" x 1/2" (Q4751350) | ||||
1 1/4" x 1 1/4" x 3/4" (Q4751337) | 1 1/4" x 1 1/4" x 1" (Q4751331) | 1 1/2" x 1" x 3/4" (Q4751517) | 1 1/2" x 1" x 1" (Q4751511) | ||||
1 1/2" x 1" x 1 1/2" (Q4751505) | 1 1/2" x 1 1/2" x 1/2" (Q4751550) | 1 1/2" x 1 1/2" x 3/4" (Q4751557) | 1 1/2" x 1 1/2" x 1" (Q4751551) | ||||
1 1/2" x 1 1/2" x 1 1/4" (Q4751553) | 2" x 1 1/2" x 1/2" (Q4752152) | 2" x 2" x 1/2" (Q4752250) | 2 1/2" x 2" x 1 1/2" (Q4752525) | ||||
2 1/2" x 2" x 2" (Q4752522) | 2 1/2" x 2 1/2" x 3/4" (Q4752557) | 2 1/2" x 2 1/2" x 1" (Q4752510) | 2 1/2" x 2 1/2" x 1 1/4" (Q4752513) | ||||
2 1/2" x 2 1/2" x 1 1/2" (Q4752515) | 2 1/2" x 2 1/2" x 2" (Q4752520) | ||||||
Tees |
|||||||
1/2" x 1/2" x 1/2" (Q4755050) | 3/4" x 3/4" x 3/4" (Q4757575) | 1" x 1" x 1" (Q4751010) | 1 1/2" x 1 1/2" x 1 1/2" (Q4751515) | ||||
2 1/2" x 2 1/2" x 2 1/2" (Q4752500) | |||||||
! Product may or may not bear the NSF U.P. Code marking. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : Hutchinson, MN
Fire Sprinkler Pipe and Fitting Systems
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe and Fitting System% ¢ ** |
PEX |
AQUASAFE®* |
ANSI/CAN/UL 1821 |
|||
Tubing |
||||||
3/4" Uponor AquaPEX White | 1" Uponor AquaPEX White | |||||
% PEX pipe and fittings are intended for use in multi-purpose piping systems of residential occupancies as defined in ANSI/NFPA 13D, "Installation of Sprinkler Systems in One- and Two- Family Dwellings and Manufactured Homes", the National Building Code of Canada, and the International Residential Code, Section 2904, and are designed to withstand a working pressure of not less than 130 psi at 120° F. PEX pipe and fittings are intended to be installed in accordance with the requirements specified in the manufacturer’s installation instructions and ANSI/NFPA 13D. Protection is intended to be provided for PEX pipe and fittings in multi-purpose piping systems. The minimum protection should consist of either (1) one layer of 3/8-in. gypsum wallboard, (2) a suspended membrane ceiling with lay-in panels or tiles having a weight of not less than 0.35 lbs per sq ft when installed with metallic support grids, (3) 1/2 in plywood or (4) other material with a 15 minute fire rating. PEX pipe and fittings are intended for use in areas where the maximum ambient temperature does not exceed 120° F. These pipe and fittings are not intended to be installed in outdoor applications. The PEX pipe and fittings are intended for use in wet-pipe systems only and have not been evaluated for use in drypipe systems. * These products may also be represented by the trade name AquaPEX. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. ** Pipe and fittings Certified as a system using installation and design manual titled "Uponor Residential Fire Sprinkler Systems, AquaSAFE™ System Installation Guide". |
Potable Water - Pipe and Fittings
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* ^ ¢ § +++ [3] [5] [G] |
PEX 5106 |
AquaPEX (Natural) |
ASTM F876/F877 |
|||
1/4" - 3" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Product may or may not bear the U.P. Code mark. [5] May also use the trade names AquaPEX Natural, AquaPEX White, or AquaPEX Clear. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* ^ ¢ +++ [2] [5] [G] |
PEX 5106 |
AquaPEX (Natural) |
CSA B137.5 |
|||
1/4" - 3" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASSE 1061 (3/8" - 2" only), ASTM F1960, ASTM F1807, and ASTM F2098. [5] May also use the trade names AquaPEX Natural, AquaPEX White, or AquaPEX Clear. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* ^ ¢ § +++ [3] [4] [G] |
PEX 5306 |
AquaPEX (Red or Blue) |
ASTM F876/F877 |
|||
1/2" - 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Product may or may not bear the U.P. Code mark. [4] Pipe may be marked PEX 5306, PEX 5206, or PEX 5106. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* ^ ¢ +++ [1] [4] [G] |
PEX 5306 |
AquaPEX (Red or Blue) |
CSA B137.5 |
|||
1/2" - 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASSE 1061 (1/2" - 2" only), ASTM F1960, ASTM F1807, and ASTM F2098. [4] Pipe may be marked PEX 5306, PEX 5206, or PEX 5106. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* ^ ¢ § +++ [3] [4] [G] |
PEX 5306 |
ServicePEX (Blue) |
ASTM F876/F877 |
|||
1/2" - 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Product may or may not bear the U.P. Code mark. [4] Pipe may be marked PEX 5306, PEX 5206, or PEX 5106. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* ^ ¢ +++ [1] [4] [G] |
PEX 5306 |
ServicePEX (Blue) |
CSA B137.5 |
|||
1/2" - 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASSE 1061 (1/2" - 2" only), ASTM F1960, ASTM F1807, and ASTM F2098. [4] Pipe may be marked PEX 5306, PEX 5206, or PEX 5106. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* ^ ¢ § +++ [3] [G] |
PEX 5306 |
ServicePEX (Blue) |
AWWA C904 |
|||
1/2" - 1 1/2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Product may or may not bear the U.P. Code mark. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe^ ¢ § ** +++ [3] [6] [G] |
PEX 5106 |
ResiPEX™ (Natural) |
ASTM F876/F877 |
|||
1/2" - 2" SDR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ** Accepted by NSF for use in residential construction, including manufactured housing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Product may or may not bear the U.P. Code mark. [6] May also use the trade names ResiPEX Natural, ResiPEX White, or ResiPEX Clear [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe^ ¢ § ** +++ [1] [6] [G] |
PEX 5106 |
ResiPEX™ (Natural) |
CSA B137.5 |
|||
1/2" - 2" SDR 9 | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ** Accepted by NSF for use in residential construction, including manufactured housing. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Tubing certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASSE 1061 (1/2" - 2" only), ASTM F1960, ASTM F1807, and ASTM F2098. [6] May also use the trade names ResiPEX Natural, ResiPEX White, or ResiPEX Clear [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : Lakeville, MN
Radiant Floor Heating
Product Type | Material Type | Trade Name | Product Standard | |||
Pipe/Fittings Assembly¥ [1] |
MLTPL |
Uponor Logo |
ASTM F877 |
|||
Radiant Rollout™ Mat |
||||||
1/2" | 5/8" | |||||
¥ Product is Certified to the Uniform Mechanical Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Mechanical Code™. [1] Product may or may not bear the U.M.Code mark. |
Facility : Rogers, MN
Potable Water - Pipe and Fittings
Product Type | Material Type | Trade Name | Product Standard | ||||
Fittings! ¢ § +++ [G] |
SP |
Uponor Logo |
ASTM F1960 |
||||
Couplings |
|||||||
1/2" x 1/2" (Q4775050/Q47750R10/Q47750R25) | 3/4" x 3/4" (Q4777575/Q47775R5/Q47775R20) | 1 ¼” x ¾” (Q47713070) | 1 ¼” x 1” (Q4771310) | ||||
1 ¼” x 1 ¼” (Q4771313) | 1 ½” x 1” (Q4771510) | 1 ½” x 1 ¼” (Q4771513) | 1 ½” x 1 ½” (Q4771515) | ||||
Elbows |
|||||||
1/2" x 1/2" (Q4760500/Q4760500R5/Q4760500R25) | 1" x 1" (Q4761000/Q4761000R5) | 1 1/4" x 1 1/4" (Q4761250) | |||||
Plugs |
|||||||
1/2" (Q4350500/Q4350500R5/Q4350500R50) | 2" (Q4352000) | ||||||
Reducing Tees |
|||||||
3/4" x 3/4" x 1/2" (Q4757550/Q4757550R5) | 1" x 1" x 1 1/4" (Q4751113) | 1 1/4" x 3/4" x 3/4" (Q4751377) | 1 1/4" x 3/4" x 1" (Q4751371) | ||||
1 1/2" x 3/4" x 3/4" (Q4751577) | 1 ½” x 1 ½” x 1” (Q4751551) | 2” x 2” x 1 ¼” (Q4752213) | 2” x 2” x 1 ½” (Q4752215) | ||||
Tees |
|||||||
1/2” x 1/2" x 1/2" (Q4755050/Q47550R5/Q47550R20) | 3/4" x 3/4" x 3/4" (Q4757575/Q4757575R5) | 1½” x 1½” x 1½” (Q4751515) | 1¼” x 1¼” x 1¼” (Q4751313) | ||||
! Product may or may not bear the NSF U.P. Code marking. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Fittings! ¢ § +++ [G] |
SP |
Uponor Logo |
CSA B137.5 |
||||
Couplings |
|||||||
1/2" x 1/2" (Q4775050/Q47750R10/Q47750R25) | 3/4" x 3/4" (Q4777575/Q47775R5/Q47775R20) | 1 ¼” x ¾” (Q4771307) | 1 ¼” x 1” (Q4771310) | ||||
1 ¼” x 1 ¼” (Q4771313) | 1 ½” x 1" (Q4771510) | 1 ½” x 1 ¼” (Q4771513) | 1 ½” x 1 ½” (Q4771515) | ||||
Elbows |
|||||||
1/2" x 1/2" (Q4760500/Q4760500R5/Q4760500R25) | 1" x 1" (Q4761000/Q4761000R5) | 1 1/4" x 1 1/4" (Q4761250) | |||||
Plugs |
|||||||
1/2" (Q4350500/Q4350500R5/Q4350500R50) | 2" (Q4352000) | ||||||
Reducing Tees |
|||||||
3/4" x 3/4" x 1/2" (Q4757550/Q4757550R5) | 1" x 1" x 1 1/4" (Q4751113) | 1 1/4" x 3/4" x 3/4" (Q4751377) | 1 1/4" x 3/4" x 1" (Q4751371) | ||||
1 1/2" x 3/4" x 3/4" (Q4751577) | |||||||
Tees |
|||||||
1/2" x 1/2" x 1/2" (Q4755050/Q47550R5/Q47550R20) | 3/4" x 3/4" x 3/4" (Q4757575/Q4757575R5) | ||||||
! Product may or may not bear the NSF U.P. Code marking. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Manifolds! ¢ § +++ [G] |
SP |
Uponor Logo |
ASTM F1960 |
||||
EP Branch Multi-port Tee, 6 (1/2") Outlets |
|||||||
3/4" (Q2267550/Q2267550R) | |||||||
! Product may or may not bear the NSF U.P. Code marking. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Manifolds! ¢ § +++ [G] |
SP |
Uponor Logo |
CSA B137.5 |
||||
EP Branch Multi-port Tee, 6 (1/2") Outlets |
|||||||
3/4" (Q2267550/Q2267550R) | |||||||
! Product may or may not bear the NSF U.P. Code marking. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
[1] [1] Cell Class - SP0110G20A30430
Facility : Hartsville, SC
Potable Water - Pipe and Fittings
Product Type | Material Type | Trade Name | Product Standard | ||||
Fittings¢ § +++ [G] |
Brass |
Uponor Logo |
ASTM F1960 |
||||
ProPEX LF Brass Adapter (PEX x Copper) |
|||||||
3/8" x 1/2" (LF4513850) | 3/4" x 1/2" (LF4517550) | 3/4" x 1" (LF4517510) | 1 1/2" x 1 1/2" (LF4511515) | ||||
2" x 2" (LF4512020) | |||||||
ProPEX LF Brass Coupling (PEX x PEX) |
|||||||
1/2" x 1/2" (LF4545050) | 3/4" x 3/4" (LF4547575) | ||||||
ProPEX LF Brass Female Threaded Adapter(PEX x NPT) |
|||||||
1/2" x 3/4" (LF4575075) | 1/2" x 3/4" (LF4575075R) | 3/4" x 3/4" (LF4577575) | 1" x 1" (LF4571010) | ||||
1" x 1" (LF45710R) | 1 1/4" x 1 1/4" (LF4571313) | 1 1/2" x 1 1/2" (LF4571515) | 2" x 2" (LF4572020) | ||||
ProPEX LF Brass Fitting Adapter (PEX x Copper) |
|||||||
1/2" x 1/2" (LF4505050) | 1/2" x 1/2" (LF45050R) | 1/2" x 3/4" (LF4505075) | 3/4" x 1/2" (LF4507550) | ||||
3/4" x 3/4" (LF4507575) | 3/4" x 3/4" (LF45075R) | 1" x 1" (LF4501010) | 1 1/4" x 1 1/4" (LF4501313) | ||||
1 1/2" x 1 1/2" (LF4501515) | 2" x 2" (LF4502020) | ||||||
ProPEX LF Brass Male Threaded Adapter (PEX x NPT) |
|||||||
1/2" x 3/4" (LF4525075) | 1/2" x 3/4" (LF4525075R) | 3/4" x 3/4" (LF4527575) | 3/4" x 3/4" (LF45275R) | ||||
3/4" x 1" (LF4527510) | 3/4" x 1" (LF4527510R) | 1" x 3/4" (LF4521075) | 1" x 3/4" (LF4521075) - copy | ||||
1" x 1" (LF4521010) | 1" x 1" (LF4521010) - copy | 1 1/4" x 1 1/4" (LF4521313) | 1 1/2" x 1 1/2" (LF4521515) | ||||
2" x 2" (LF4522020) | 2 1/2" x 2 1/2" (LF4522525) | 3" x 3" (LF4523030) | |||||
ProPEX LF Brass Sweat Adapter (PEX x Copper) |
|||||||
1/2" x 1/2" (LF4515050) | 1/2" x 1/2" (LF45150R) | 1/2" x 1/2" (LF45150R25) | 1/2" x 3/4" (LF4515075) | ||||
3/4" x 3/4" (LF4517575) | 3/4" x 3/4" (LF45175R) | 1" x 1" (LF4511010) | 1" x 1" (LF45110R) | ||||
1 1/4" x 1 1/4" (LF4511313) | 2 1/2" x 2 1/2" (LF4512525) | 3" x 3" (LF4513030) | |||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Fittings¢ § +++ [G] |
Brass |
Uponor Logo |
CSA B137.5 |
||||
ProPEX LF Brass Adapter (PEX x Copper) |
|||||||
3/8" x 1/2" (LF4513850) | 3/4" x 1/2" (LF4517550) | 3/4" x 1" (LF4517510) | 1 1/2" x 1 1/2" (LF4511515) | ||||
2" x 2" (LF4512020) | |||||||
ProPEX LF Brass Coupling (PEX x PEX) |
|||||||
1/2" x 1/2" (LF4545050) | 3/4" x 3/4" (LF4547575) | ||||||
ProPEX LF Brass Female Threaded Adapter(PEX x NPT) |
|||||||
1/2" x 3/4" (LF4575075) | 1/2" x 3/4" (LF4575075R) | 3/4" x 3/4" (LF4577575) | 1" x 1" (LF4571010) | ||||
1" x 1" (LF45710R) | 1 1/4" x 1 1/4" (LF4571313) | 1 1/2" x 1 1/2" (LF4571515) | 2" x 2" (LF4572020) | ||||
ProPEX LF Brass Fitting Adapter (PEX x Copper) |
|||||||
1/2" x 1/2" (LF4505050) | 1/2" x 1/2" (LF45050R) | 1/2" x 3/4" (LF4505075) | 3/4" x 1/2" (LF4507550) | ||||
3/4" x 3/4" (LF45075R) | 3/4" x 3/4" (LF4507575) - copy | 1" x 1" (LF4501010) | 1 1/4" x 1 1/4" (LF4501313) | ||||
1 1/2" x 1 1/2" (LF4501515) | 2" x 2" (LF4502020) | ||||||
ProPEX LF Brass Male Threaded Adapter (PEX x NPT) |
|||||||
1/2" x 3/4" (LF4525075) | 1/2" x 3/4" (LF4525075R) | 3/4" x 3/4" (LF4527575) | 3/4" x 3/4" (LF45275R) | ||||
3/4" x 1" (LF4527510) | 3/4" x 1" (LF4527510R) | 1" x 3/4" (LF4521075) | 1" x 3/4" (LF4521075R) | ||||
1" x 1" (LF4521010) | 1" x 1" (LF45210R) | 1 1/4" x 1 1/4" (LF4521313) | 1 1/2" x 1 1/2" (LF4521515) | ||||
2" x 2" (LF4522020) | 2 1/2" x 2 1/2" (LF4522525) | 3" x 3" (LF4523030) | |||||
ProPEX LF Brass Sweat Adapter (PEX x Copper) |
|||||||
1/2" x 1/2" (LF4515050) | 1/2" x 1/2" (LF45150R) | 1/2" x 1/2" (LF45150R25) | 1/2" x 3/4" (LF4515075) | ||||
3/4" x 3/4" (LF4517575) | 3/4" x 3/4" (LF45175R) | 1" x 1" (LF4511010) | 1" x 1" (LF45110R) | ||||
1 1/4" x 1 1/4" (LF4511313) | 2 1/2" x 2 1/2" (LF4512525) | 3" x 3" (LF4513030) | |||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Fittings¢ § +++ |
SS |
Uponor Logo |
ASTM F1960 |
||||
Male Threaded Adapter (PEX x NPT) |
|||||||
1/2" x 1/2" (Q8525050) | 3/4" x 3/4" (Q8527575) | 1" x 1" (Q8521010) | |||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
|||||||
Fittings¢ § +++ |
SS |
Uponor Logo |
CSA B137.5 |
||||
Male Threaded Adapter (PEX x NPT) |
|||||||
1/2" x 1/2" (Q8525050) | 3/4" x 3/4" (Q8527575) | 1" x 1" (Q8521010) | |||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). |
Radiant Floor Heating
Product Type | Material Type | Trade Name | Product Standard | |||
Fittings¢ ¥ [1] |
Brass |
Uponor Logo |
ASTM F877 |
|||
Brass Manifold Adapter |
||||||
R32 x 1" Adapter or 1 1/4" Fitting Adapter (A4133210) | ||||||
Threaded Brass Manifold Bushing |
||||||
R32 Male x 1" Female NPT (A2123210) | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. ¥ Product is Certified to the Uniform Mechanical Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Mechanical Code™. [1] Certified for use with Uponor manifolds only. |
||||||
Fittings¢ ¥ [1] |
Brass |
Uponor Logo |
CSA B137.5 |
|||
Brass Manifold Adapter |
||||||
R32 x 1" Adapter or 1 1/4" Fitting Adapter (A4133210) | ||||||
Threaded Brass Manifold Bushing |
||||||
R32 Male x 1" Female NPT (A2123210) | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. ¥ Product is Certified to the Uniform Mechanical Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Mechanical Code™. [1] Certified for use with Uponor manifolds only. |
Facility : Germantown, WI
Potable Water - Pipe and Fittings
Product Type | Material Type | Trade Name | Product Standard | ||||
Fittings! ¢ § +++ [G] |
SP |
Uponor Logo |
ASTM F1960 |
||||
45° Elbows |
|||||||
1" x 1" (Q4761010) | 1 1/4" x 1 1/4" (Q4761313) | ||||||
90° Elbows |
|||||||
1/2" x 1/2" (Q4760500/Q4760500R5/Q4760500R25) | 2" x 2" (Q4762000) | ||||||
Couplings |
|||||||
1" x 1" (Q4771010/Q47710R5) | 2" x 1 1/2" (Q4772015) | 2" x 2" (Q4772020) | |||||
Reducing Tees |
|||||||
1/2" x 1/2" x 3/4" (Q4755575/Q4755575R5) | 1 1/4" x 1 1/4" x 1/2" (Q4751350) | 2" x 2" x 3/4" (Q4752275) | 2" x 2" x 1" (Q4752210) | ||||
Tees |
|||||||
2" x 2" x 2" (Q4752000) | |||||||
! Product may or may not bear the NSF U.P. Code marking. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Fittings! ¢ § +++ [G] |
SP |
Uponor Logo |
CSA B137.5 |
||||
45° Elbows |
|||||||
1" x 1" (Q4761010) | 1 1/4" x 1 1/4" (Q4761313) | ||||||
90° Elbows |
|||||||
1/2" x 1/2" (Q4760500/Q4760500R5/Q4760500R25) | 2" x 2" (Q4762000) | ||||||
Couplings |
|||||||
1" x 1" (Q4771010/Q47710R5) | 2" x 1 1/2" (Q4772015) | 2" x 2" (Q4772020) | |||||
Reducing Tees |
|||||||
1/2" x 1/2" x 3/4" (Q4755575/Q4755575R5) | 1 1/4" x 1 1/4" x 1/2" (Q4751350) | 2" x 2" x 3/4" (Q4752275) | 2" x 2" x 1" (Q4752210) | ||||
Tees |
|||||||
2" x 2" x 2" (Q4752000) | |||||||
! Product may or may not bear the NSF U.P. Code marking. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : Kenosha, WI
Potable Water - Pipe and Fittings
Product Type | Material Type | Trade Name | Product Standard | ||||
Fittings! ¢ § +++ [G] |
SP |
Uponor Logo (U/W) |
ASTM F1960 |
||||
ProPEX EP Couplings |
|||||||
1/4" PEX x 3/4" PEX (Q4771307) | 1/2" PEX x 1/2" PEX (Q4775050/Q47750R10/Q47750R25) | 1/2" PEX x 3/4" PEX (Q4775075/Q4775075R5/Q4775075R25) | 1 1/4" PEX x 1" PEX (Q4771310) | ||||
1 1/4" PEX x 1 1/4" PEX (Q4771313) | 1 1/2" PEX x 3/4" PEX (Q4771507) | 1 1/2" PEX x 1" PEX (Q4771510) | 1 1/2" PEX x 1 1/4" PEX (Q4771513) | ||||
1 1/2" PEX x 1 1/2" PEX (Q4771515) | 2" PEX x 2" PEX (Q4772020) | 2" PEX x 1 1/2" PEX (Q4772015) | 2 1/2" PEX x 1 1/4" PEX (Q4772513) | ||||
2 1/2" PEX x 1 1/2" PEX (Q4772515) | 2 1/2" PEX x 2" PEX (Q4772520) | 2 1/2" PEX x 2 1/2" PEX (Q4772525) | 3" PEX x 2" PEX (Q4773020) | ||||
3" PEX x 2 1/2" PEX (Q4773025) | 3" PEX x 3" PEX Q4773030 (1085084) | ||||||
ProPEX EP Elbow |
|||||||
1/2" PEX x 1/2" PEX (Q4760500/Q4760500R5/Q4760500R25) | 3/4" PEX x 3/4" PEX (Q4760750/Q4760750R5/Q4760750R10) | 1 1/2" PEX x 1 1/2" PEX (Q4761500) | 1 1/4" PEX x 1 1/4" PEX (Q4761250) | ||||
2" PEX x 2" PEX (Q4762000) | |||||||
ProPEX EP Opposing Port Tees |
|||||||
1" x 1" x 3/4" x 3/4" (Q4801075) | 1 1/4" x 1 1/4" x 3/4" x 3/4" (Q4801375) | 1 1/2" x 1 1/2" x 3/4" x 3/4" (Q4801575) | 2" x 2" x 3/4" x 3/4" (Q4802075) | ||||
ProPEX EP Plugs |
|||||||
1/2" PEX (Q4350500/Q4350500R5/Q4350500R50) | 1 1/4" PEX (Q4351250) | 1 1/2" PEX (Q4351500) | 2" PEX (Q4352000) | ||||
ProPEX EP Reducing Tee |
|||||||
3/4" PEX x 1/2" PEX x 1/2" PEX (Q4757555/Q4757555R5/Q4757555R10) | 3/4" PEX x 1/2" PEX x 3/4" PEX (Q4757557/Q4757557R5/Q4757557R8) | 1 1/4" PEX x 1" PEX x 3/4" PEX (Q4751317) | 1 1/4" PEX x 1" PEX x 1" PEX (Q4751311) | ||||
1 1/4" PEX x 1 1/4" PEX x 3/4" PEX (Q4751337) | 1 1/4" PEX x 1 1/4" PEX x 1" PEX (Q4751331) | 1 1/2" PEX x 1" PEX x 3/4" PEX (Q4751517) | 1 1/2" PEX x 1" PEX x 1" PEX (Q4751511) | ||||
1 1/2" PEX x 1 1/4" PEX x 3/4" PEX (Q4751537) | 1 1/2" PEX x 1 1/4" PEX x 1" PEX (Q4751531) | 1 1/2" PEX x 1 1/4" PEX x 1 1/4" PEX (Q4751533) | 1 1/2" PEX x 1 1/2" PEX x 3/4" PEX (Q4751557) | ||||
1 1/2" PEX x 1 1/2" PEX x 1" PEX (Q4751551) | 1 1/2" PEX x 1 1/2" PEX x 1 1/4" PEX (Q4751553) | 2" PEX x 1 1/2" PEX x 3/4" PEX (Q4752575) | 2" PEX x 1 1/2" PEX x 1" PEX (Q4752051) | ||||
2" PEX x 1 1/2" PEX x 1 1/4" PEX (Q4752053) | 2" PEX x 1 1/2" PEX x 1 1/2" PEX (Q4752055) | 2" PEX x 2" PEX x 3/4" PEX (Q4752275) | 2" PEX x 2" PEX x 1" PEX (Q4752210) | ||||
2" x 2" x 1 1/4" (Q4752213) | 2" PEX x 2" PEX x 1 1/2" PEX (Q4752215) | 3" PEX x 2" PEX x 2" PEX (Q4753220) | 3" PEX x 2 1/2" PEX x 1 1/2" PE (Q4753215) | ||||
3" PEX x 2 1/2" PEX x 2" PEX (Q4753252) | 3" PEX x 3" PEX x 3/4" PEX (Q4753375) | 3" PEX x 3" PEX x 1" PEX (Q4753310) | 3" PEX x 3" PEX x 1" PEX (Q4753313) | ||||
3" PEX x 3" PEX x 1 1/2" PEX (Q4753315) | 3" PEX x 3" PEX x 2" PEX (Q4753320) | 3" PEX x 3" PEX x 2 1/2" PEX (Q4753325) | |||||
ProPEX EP Tees |
|||||||
1/2" PEX x 1/2" PEX x 1/2" PEX (Q4755050/Q47550R5/Q47550R20) | 1 1/4" PEX x 1 1/4" PEX x 1 1/4" PEX (Q4751313) | 2" PEX x 2" PEX x 2" PEX (Q4752000) | 3" PEX x 3" PEX x 3" PEX (Q4753000) (1085081) | ||||
! Product may or may not bear the NSF U.P. Code marking. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Fittings! ¢ § +++ [G] |
SP |
Uponor Logo (U/W) |
CSA B137.5 |
||||
ProPEX EP Couplings |
|||||||
1/4" PEX x 3/4" PEX (Q4771307) | 1/2" PEX x 1/2" PEX (Q4775050/Q47750R10/Q47750R25) | 1/2" PEX x 3/4" PEX (Q4775075/Q4775075R5/Q4775075R25) | 1 1/4" PEX x 1" PEX (Q4771310) | ||||
1 1/4" PEX x 1 1/4" PEX (Q4771313) | 1 1/2" PEX x 3/4" PEX (Q4771507) | 1 1/2" PEX x 1" PEX (Q4771510) | 1 1/2" PEX x 1 1/4" PEX (Q4771513) | ||||
1 1/2" PEX x 1 1/2" PEX (Q4771515) | 2" PEX x 1 1/2" PEX (Q4772015) | 2" PEX x 2" PEX (Q4772020) | 2 1/2" PEX x 1 1/4" PEX (Q4772513) | ||||
2 1/2" PEX x 1 1/2" PEX (Q4772515) | 2 1/2" PEX x 2" PEX (Q4772520) | 2 1/2" PEX x 2 1/2" PEX (Q4772525) | 3" PEX x 2" PEX (Q4773020) | ||||
3" PEX x 2 1/2" PEX (Q4773025) | 3" PEX x 3" PEX Q4773030 (1085084) | ||||||
ProPEX EP Elbow |
|||||||
1/2" PEX x 1/2" PEX (Q4760500/Q4760500R5/Q4760500R25) | 3/4" PEX x 3/4" PEX (Q4760750/Q4760750R5/Q4760750R10) | 1 1/2" PEX x 1 1/2" PEX (Q4761500) | 1 1/4" PEX x 1 1/4" PEX (Q4761250) | ||||
2" PEX x 2" PEX (Q4762000) | |||||||
ProPEX EP Opposing Port Tees |
|||||||
1" x 1" x 3/4" x 3/4" (Q4801075) | 1 1/4" x 1 1/4" x 3/4" x 3/4" (Q4801375) | 1 1/2" x 1 1/2" x 3/4" x 3/4" (Q4801575) | 2" x 2" x 3/4" x 3/4" (Q4802075) | ||||
ProPEX EP Plugs |
|||||||
1/2" PEX (Q4350500/Q4350500R5/Q4350500R50) | 1 1/4" PEX (Q4351250) | 1 1/2" PEX (Q4351500) | 2" PEX (Q4352000) | ||||
ProPEX EP Reducing Tee |
|||||||
3/4" PEX x 1/2" PEX x 1/2" PEX (Q4757555/Q4757555R5/Q4757555R10) | 3/4" PEX x 1/2" PEX x 3/4" PEX (Q4757557/Q4757557R5/Q4757557R8) | 1 1/4" PEX x 1" PEX x 3/4" PEX (Q4751317) | 1 1/4" PEX x 1" PEX x 1" PEX (Q4751311) | ||||
1 1/4" PEX x 1 1/4" PEX x 3/4" PEX (Q4751337) | 1 1/4" PEX x 1 1/4" PEX x 1" PEX (Q4751331) | 1 1/2" PEX x 1" PEX x 3/4" PEX (Q4751517) | 1 1/2" PEX x 1" PEX x 1" PEX (Q4751511) | ||||
1 1/2" PEX x 1 1/4" PEX x 3/4" PEX (Q4751537) | 1 1/2" PEX x 1 1/4" PEX x 1" PEX (Q4751531) | 1 1/2" PEX x 1 1/4" PEX x 1 1/4" PEX (Q4751533) | 1 1/2" PEX x 1 1/2" PEX x 3/4" PEX (Q4751557) | ||||
1 1/2" PEX x 1 1/2" PEX x 1" PEX (Q4751551) | 1 1/2" PEX x 1 1/2" PEX x 1 1/4" PEX (Q4751553) | 2" PEX x 1 1/2" PEX x 3/4" PEX (Q4752575) | 2" PEX x 1 1/2" PEX x 1" PEX (Q4752051) | ||||
2" PEX x 1 1/2" PEX x 1 1/4" PEX (Q4752053) | 2" PEX x 1 1/2" PEX x 1 1/2" PEX (Q4752055) | 2" PEX x 2" PEX x 3/4" PEX (Q4752275) | 2" PEX x 2" PEX x 1" PEX (Q4752210) | ||||
2" x 2" x 1 1/4" (Q4752213) | 2" PEX x 2" PEX x 1 1/2" PEX (Q4752215) | 3" PEX x 2" PEX x 2" PEX (Q4753220) | 3" PEX x 2 1/2" PEX x 1 1/2" PE (Q4753215) | ||||
3" PEX x 2 1/2" PEX x 2" PEX (Q4753252) | 3" PEX x 3" PEX x 3/4" PEX (Q4753375) | 3" PEX x 3" PEX x 1" PEX (Q4753310) | 3" PEX x 3" PEX x 1" PEX (Q4753313) | ||||
3" PEX x 3" PEX x 1 1/2" PEX (Q4753315) | 3" PEX x 3" PEX x 2" PEX (Q4753320) | 3" PEX x 3" PEX x 2 1/2" PEX (Q4753325) | |||||
ProPEX EP Tees |
|||||||
1/2" PEX x 1/2" PEX x 1/2" PEX (Q4755050/Q47550R5/Q47550R20) | 1 1/4" PEX x 1 1/4" PEX x 1 1/4" PEX (Q4751313) | 2" PEX x 2" PEX x 2" PEX (Q4752000) | 3" PEX x 3" PEX x 3" PEX (Q4753000) (1085081) | ||||
! Product may or may not bear the NSF U.P. Code marking. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Manifolds! ¢ § +++ [G] |
SP |
Uponor Logo (U/W) |
ASTM F1960 |
||||
1" EP Branch Multi-port Tee, 4 outlets (Q2241050) | 1 1/4" EP Branch Multi-port Tee, 3 (3/4") outlets (Q2231375) | EP Flow-through Multi-port Tee, 2 outlets, 3/4" x 3/4" ProPEX (Q2227557) | EP Flow-through Multi-port Tee, 2 outlets, 3/4" x 3/4" ProPEX (Q2227557R) | ||||
EP Flow-through Multi-port Tee, 3 outlets, 3/4" x 3/4" ProPEX (Q2237557) | EP Flow-through Multi-port Tee, 3 outlets, 3/4" x 3/4" ProPEX (Q2237557R) | EP Flow-through Multi-port Tee, 3 (3/4") outlets, 1 1/4"x1 1/4" ProPEX(Q2231373) | EP Flow-through Multi-port Tee, 3 outlets, 1" x 3/4" ProPEX (Q2231057) | ||||
Flow-through Multi-port Tee, 4 outlets, 1" x 1" ProPEX (Q2241051) | |||||||
! Product may or may not bear the NSF U.P. Code marking. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Manifolds! ¢ § +++ [G] |
SP |
Uponor Logo (U/W) |
ASTM F877 |
||||
1" EP Branch Multi-port Tee, 4 outlets (Q2241050) | 1 1/4" EP Branch Multi-port Tee, 3 (3/4") outlets (Q2231375) | EP Flow-through Multi-port Tee, 2 outlets, 3/4" x 3/4" ProPEX (Q2227557) | EP Flow-through Multi-port Tee, 2 outlets, 3/4" x 3/4" ProPEX (Q2227557R) | ||||
EP Flow-through Multi-port Tee, 3 outlets, 3/4" x 3/4" ProPEX (Q2237557) | EP Flow-through Multi-port Tee, 3 outlets, 3/4" x 3/4" ProPEX (Q2237557R) | EP Flow-through Multi-port Tee, 3 (3/4") outlets, 1 1/4"x1 1/4" ProPEX(Q2231373) | EP Flow-through Multi-port Tee, 3 outlets, 1" x 3/4" ProPEX (Q2231057) | ||||
Flow-through Multi-port Tee, 4 outlets, 1" x 1" ProPEX (Q2241051) | |||||||
! Product may or may not bear the NSF U.P. Code marking. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Manifolds! ¢ § +++ [G] |
SP |
Uponor Logo (U/W) |
CSA B137.5 |
||||
1" EP Branch Multi-port Tee, 4 outlets (Q2241050) | 1 1/4" EP Branch Multi-port Tee, 3 (3/4") outlets (Q2231375) | EP Flow-through Multi-port Tee, 2 outlets, 3/4" x 3/4" ProPEX (Q2227557) | EP Flow-through Multi-port Tee, 2 outlets, 3/4" x 3/4" ProPEX (Q2227557R) | ||||
EP Flow-through Multi-port Tee, 3 outlets, 3/4" x 3/4" ProPEX (Q2237557) | EP Flow-through Multi-port Tee, 3 outlets, 3/4" x 3/4" ProPEX (Q2237557R) | EP Flow-through Multi-port Tee, 3 (3/4") outlets, 1 1/4"x1 1/4" ProPEX(Q2231373) | EP Flow-through Multi-port Tee, 3 outlets, 1" x 3/4" ProPEX (Q2231057) | ||||
Flow-through Multi-port Tee, 4 outlets, 1" x 1" ProPEX (Q2241051) | |||||||
! Product may or may not bear the NSF U.P. Code marking. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Fittings! ¢ § +++ [G] |
MLTPL |
Uponor Logo (U/W) |
ASTM F1960 |
||||
ProPEX LF Brass x CPVC Socket Adapter |
|||||||
1 1/4" PEX x 1 1/4" CPVC (CTS) (CP4501313) | 1 1/2" PEX x 1 1/2" CPVC (CTS) (CP4501515) | 2" PEX x 2" CPVC (CTS) (CP4502020) | 1 1/4" PEX x 1 1/4" CPVC (CTS) (CP4511313) | ||||
1 1/2" PEX x 1 1/2" CPVC (CTS) (CP4511515) | 2" PEX x 2" CPVC (CTS) (CP4512020) | ||||||
ProPEX LF Brass x CPVC Spigot Adapter Kit |
|||||||
1 1/4" PEX x 1 1/4" CPVC (IPS or CTS) (CP4501300) | 1 1/2" PEX x 1 1/2" CPVC (IPS or CTS) (CP4501500) | 2" PEX x 2" CPVC (IPS or CTS) (CP4502000) | |||||
! Product may or may not bear the NSF U.P. Code marking. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Fittings! ¢ § +++ [G] |
MLTPL |
Uponor Logo (U/W) |
CSA B137.5 |
||||
ProPEX LF Brass x CPVC Socket Adapter |
|||||||
1 1/4" PEX x 1 1/4" CPVC (CTS) (CP4501313) | 1 1/2" PEX x 1 1/2" CPVC (CTS) (CP4501515) | 2" PEX x 2" CPVC (CTS) (CP4502020) | 1 1/4" PEX x 1 1/4" CPVC (CTS) (CP4511313) | ||||
1 1/2" PEX x 1 1/2" CPVC (CTS) (CP4511515) | 2" PEX x 2" CPVC (CTS) (CP4512020) | ||||||
ProPEX LF Brass x CPVC Spigot Adapter Kit |
|||||||
1 1/4" PEX x 1 1/4" CPVC (IPS or CTS) (CP4501300) | 1 1/2" PEX x 1 1/2" CPVC (IPS or CTS) (CP4501500) | 2" PEX x 2" CPVC (IPS or CTS) (CP4502000) | |||||
! Product may or may not bear the NSF U.P. Code marking. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Fittings! ¢ § +++ [G] |
MLTPL |
Uponor Logo (U/W) |
ASTM D2846 |
||||
ProPEX LF Brass x CPVC Socket Adapter |
|||||||
1 1/4" PEX x 1 1/4" CPVC (CTS) (CP4501313) | 1 1/2" PEX x 1 1/2" CPVC (CTS) (CP4501515) | 2" PEX x 2" CPVC (CTS) (CP4502020) | 1 1/4" PEX x 1 1/4" CPVC (CTS) (CP4511313) | ||||
1 1/2" PEX x 1 1/2" CPVC (CTS) (CP4511515) | 2" PEX x 2" CPVC (CTS) (CP4512020) | ||||||
ProPEX LF Brass x CPVC Spigot Adapter Kit |
|||||||
1 1/4" PEX x 1 1/4" CPVC (IPS or CTS) (CP4501300) | 1 1/2" PEX x 1 1/2" CPVC (IPS or CTS) (CP4501500) | 2" PEX x 2" CPVC (IPS or CTS) (CP4502000) | |||||
! Product may or may not bear the NSF U.P. Code marking. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Fittings! ¢ § +++ [G] |
MLTPL |
Uponor Logo (U/W) |
CSA B137.6 |
||||
ProPEX LF Brass x CPVC Socket Adapter |
|||||||
1 1/4" PEX x 1 1/4" CPVC (CTS) (CP4501313) | 1 1/2" PEX x 1 1/2" CPVC (CTS) (CP4501515) | 2" PEX x 2" CPVC (CTS) (CP4502020) | 1 1/4" PEX x 1 1/4" CPVC (CTS) (CP4511313) | ||||
1 1/2" PEX x 1 1/2" CPVC (CTS) (CP4511515) | 2" PEX x 2" CPVC (CTS) (CP4512020) | ||||||
ProPEX LF Brass x CPVC Spigot Adapter Kit |
|||||||
1 1/4" PEX x 1 1/4" CPVC (IPS or CTS) (CP4501300) | 1 1/2" PEX x 1 1/2" CPVC (IPS or CTS) (CP4501500) | 2" PEX x 2" CPVC (IPS or CTS) (CP4502000) | |||||
! Product may or may not bear the NSF U.P. Code marking. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : Manitowoc, WI
Potable Water - Pipe and Fittings
Product Type | Material Type | Trade Name | Product Standard | |||
Fittings! ¢ § +++ [G] |
SP |
Uponor Logo |
ASTM F1960 |
|||
ProPEX EP Tees (PEX x PEX x PEX) |
||||||
1" x 3/4" x 3/4" (Q4751775) | 1" x 1" x 1/2" (Q4751150) | 1 1/2" x 1 1/2" x 1/2" (Q4751550) | ||||
! Product may or may not bear the NSF U.P. Code marking. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Fittings! ¢ § +++ [G] |
SP |
Uponor Logo A |
CSA B137.5 |
|||
ProPEX EP Tees (PEX x PEX x PEX) |
||||||
1" x 3/4" x 3/4" (Q4751775) | 1" x 1" x 1/2" (Q4751150) | 1 1/2" x 1 1/2" x 1/2" (Q4751550) | ||||
! Product may or may not bear the NSF U.P. Code marking. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : Menomonee Falls, WI
Potable Water - Pipe and Fittings
Product Type | Material Type | Trade Name | Product Standard | ||||
Fittings! ¢ § +++ [G] |
SP |
Uponor Logo |
ASTM F1960 |
||||
Couplings |
|||||||
1/2" x 1/2" (Q4775050/Q47750R10/Q47750R25) | 1/2" x 3/4" (Q4775075/Q4775075R5/Q4775075R25) | 3/4" x 3/4" (Q4777575/Q47775R5/Q47775R20) | 3/4" x 1" (Q4777510/Q4777510R5) | ||||
1" x 1" (Q4771010/Q47710R5) | |||||||
Elbows |
|||||||
1/2" (Q4760500/Q4760500R5/Q4760500R25) | 3/4" x 3/4" (Q4760750/Q4760750R5/Q4760750R10) | 1 1/4" (Q4761250) | 1 1/2" (Q4761500) | ||||
Plugs |
|||||||
3/4" (Q4350750/Q4350750R5) | |||||||
Reducing Tees |
|||||||
3/4" x 1/2" x 1/2" (Q4757555/Q4757555R5/Q4757555R10) | 3/4" x 1/2" x 3/4" (Q4757557/Q4757557R5/Q4757557R8) | 3/4" x 3/4" x 1/2" (Q4757550/Q4757550R5) | 1" x 3/4" x 1 1/4" (Q4751753) | ||||
1 1/4" x 1 1/4" x 3/4" (Q4751337) | 1 1/4" x 3/4" x 1 1/4" (Q4751373) | 1 1/2" x 3/4" x 1 1/2" (Q4751575) | |||||
Tees |
|||||||
1/2" x 1/2" x 1/2" (Q4755050/Q47550R5/Q47550R20) | 3/4" x 3/4" x 3/4" (Q4757575) | ||||||
! Product may or may not bear the NSF U.P. Code marking. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Fittings! ¢ § +++ [G] |
SP |
Uponor Logo |
CSA B137.5 |
||||
Couplings |
|||||||
1/2" x 1/2" (Q4775050/Q47750R10/Q47750R25) | 1/2" x 3/4" (Q4775075/Q4775075R5/Q4775075R25) | 3/4" x 3/4" (Q4777575/Q47775R5/Q47775R20) | 3/4" x 1" (Q4777510/Q4777510R5) | ||||
1" x 1" (Q4771010/Q47710R5) | |||||||
Elbows |
|||||||
1/2" (Q4760500/Q4760500R5/Q4760500R25) | 3/4" x 3/4" (Q4760750/Q4760750R5/Q4760750R10) | 1 1/4" (Q4761250) | 1 1/2" (Q4761500) | ||||
Plugs |
|||||||
3/4" (Q4350750/Q4350750R5) | |||||||
Reducing Tees |
|||||||
3/4" x 1/2" x 1/2" (Q4757555/Q4757555R5/Q4757555R10) | 3/4" x 1/2" x 3/4" (Q4757557/Q4757557R5/Q4757557R8) | 3/4" x 3/4" x 1/2" (Q4757550/Q4757550R5) | 1" x 3/4" x 1 1/4" (Q4751753) | ||||
1 1/4" x 1 1/4" x 3/4" (Q4751337) | 1 1/4" x 3/4" x 1 1/4" (Q4751373) | 1 1/2" x 3/4" x 1 1/2" (Q4751575) | |||||
Tees |
|||||||
1/2" x 1/2" x 1/2" (Q4755050/Q47550R5/Q47550R20) | 3/4" x 3/4" x 3/4" (Q4757575) | ||||||
! Product may or may not bear the NSF U.P. Code marking. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : Whitewater, WI
Potable Water - Pipe and Fittings
Product Type | Material Type | Trade Name | Product Standard | ||||
Fittings! ¢ § +++ [G] |
SP |
Uponor Logo |
ASTM F1960 |
||||
Couplings |
|||||||
1/2" x 1/2" (Q4775050/Q47750R10/Q47750R25) | 1/2" x 3/4" (Q4775075/Q4775075R5/Q4775075R25) | 3/4" x 3/4" (Q4777575/Q47775R5/Q47775R20) | 3/4" x 1" (Q4777510/Q4777510R5) | ||||
1" x 1" (Q4771010/Q47710R5) | |||||||
Elbows |
|||||||
1/2" (Q4760500/Q4760500R5/Q4760500R25) | 3/4" x 3/4" (Q4760750/Q4760750R5/Q4760750R10) | 1 1/4" (Q4761250) | 1 1/2" (Q4761500) | ||||
Plugs |
|||||||
3/4" (Q4350750/Q4350750R5) | |||||||
Reducing Tees |
|||||||
3/4" x 1/2" x 1/2" (Q4757555/Q4757555R5/Q4757555R10) | 3/4" x 1/2" x 3/4" (Q4757557/Q4757557R5/Q4757557R8) | 3/4" x 3/4" x 1/2" (Q4757550/Q4757550R5) | 1" x 3/4" x 1 1/4" (Q4751753) | ||||
1 1/4" x 1 1/4" x 3/4" (Q4751337) | 1 1/4" x 3/4" x 1 1/4" (Q4751373) | 1 1/2" x 3/4" x 1 1/2" (Q4751575) | |||||
Tees |
|||||||
1/2" x 1/2" x 1/2" (Q4755050/Q47550R5/Q47550R20) | 3/4" x 3/4" x 3/4" (Q4757575/Q4757575R5) | ||||||
! Product may or may not bear the NSF U.P. Code marking. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Fittings! ¢ § +++ [G] |
SP |
Uponor Logo |
CSA B137.5 |
||||
Couplings |
|||||||
1/2" x 1/2" (Q4775050/Q47750R10/Q47750R25) | 1/2" x 3/4" (Q4775075/Q4775075R5/Q4775075R25) | 3/4" x 3/4" (Q4777575/Q47775R5/Q47775R20) | 3/4" x 1" (Q4777510/Q4777510R5) | ||||
1" x 1" (Q4771010/Q47710R5) | |||||||
Elbows |
|||||||
1/2" (Q4760500/Q4760500R5/Q4760500R25) | 3/4" x 3/4" (Q4760750/Q4760750R5/Q4760750R10) | 1 1/4" (Q4761250) | 1 1/2" (Q4761500) | ||||
Plugs |
|||||||
3/4" (Q4350750/Q4350750R5) | |||||||
Reducing Tees |
|||||||
3/4" x 1/2" x 1/2" (Q4757555/Q4757555R5/Q4757555R10) | 3/4" x 1/2" x 3/4" (Q4757557/Q4757557R5/Q4757557R8) | 3/4" x 3/4" x 1/2" (Q4757550/Q4757550R5) | 1" x 3/4" x 1 1/4" (Q4751753) | ||||
1 1/4" x 1 1/4" x 3/4" (Q4751337) | 1 1/4" x 3/4" x 1 1/4" (Q4751373) | 1 1/2" x 3/4" x 1 1/2" (Q4751575) | |||||
Tees |
|||||||
1/2" x 1/2" x 1/2" (Q4755050/Q47550R5/Q47550R20) | 3/4" x 3/4" x 3/4" (Q4757575/Q4757575R5) | ||||||
! Product may or may not bear the NSF U.P. Code marking. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : Westlock, Alberta, Canada
Potable Water - Pipe and Fittings
Product Type | Material Type | Trade Name | Product Standard | ||||
Manifolds§ +++ [G] |
MLTPL |
Uponor Logo |
ASTM F877 |
||||
Copper Branch Manifold |
|||||||
ProPEX 1" with 1/2" ProPEX LF brass outlets, 4 outlets (LF2801050) | 1" with 4 LF Brass outlets, 3/4" LF Brass ProPEX Inlet (LF2807550) | ProPEX 1" with 1/2" ProPEX LF brass outlets, 6 outlets (LF2811050) | 1" with 6 LF Brass outlets, 3/4" LF Brass ProPEX Inlet (LF2817550) | ||||
ProPEX 1" with 1/2" ProPEX LF brass outlets, 8 outlets (LF2821050) | 1" with 8 LF Brass outlets, 3/4" LF Brass ProPEX Inlet (LF2827550) | ProPEX 1" with 1/2" ProPEX LF brass outlets, 10 outlets (LF2831050) | 1" with 10 LF Brass outlets, 3/4" LF Brass ProPEX Inlet (LF2837550) | ||||
ProPEX 1" with 1/2" ProPEX LF brass outlets, 12 outlets (LF2841050) | 1"w/5LF 1/2" ProPEX Ball Valve outlets,3/4"LF ProPEX left-side inlet(LF2500050L) | 1"w/5LF 1/2"ProPEX Ball Valve outlets,3/4"LF ProPEX right-side inlet(LF2500050R) | 1"w/4LF 1/2" ProPEX Ball Valve outlets,3/4"LF ProPEX left-side inlet(LF2500040L) | ||||
1"w/4LF 1/2"ProPEX Ball Valve outlets,3/4"LF ProPEX right-side inlet(LF2500040R) | 1"w/3LF 1/2" ProPEX Ball Valve outlets,3/4"LF ProPEX left-side inlet(LF2500030L) | 1"w/3LF 1/2"ProPEX Ball Valve outlets,3/4"LF ProPEX right-side inlet(LF2500030R) | |||||
Copper Flow-through Multi-port Tee, 3 outlets |
|||||||
¾" x ¾" ProPEX (LF2237557) | |||||||
Copper Manifold |
|||||||
1" with LF Brass 1/2" ProPEX Ball Valve, 4 outlets (LF2500400) | 1" with LF Brass 1/2" ProPEX Ball Valve, 6 outlets (LF2500600) | 1" with LF Brass 1/2" ProPEX Ball Valve, 8 outlets (LF2500800) | 1" with LF Brass 1/2" ProPEX Ball Valve, 10 outlets (LF2501000) | ||||
1" with LF Brass 1/2" ProPEX Ball Valve, 12 outlets (LF2501200) | 1" x 6' with 24 LF Brass outlets, 1/2" ProPEX, 3" on center (LF2512450) | ||||||
Copper Valveless Manifold |
|||||||
1" with 2 outlets, 1/2" sweat, 1 1/2" on center (F2741050) | 1" with 2 outlets, 3/4"' sweat, 1 1/2" on center (F2741075) | 1" with 3 outlets, 1/2" sweat, 1 1/2" on center (F2751050) | 1" with 3 outlets, 3/4" sweat, 1 1/2" on center (F2751075) | ||||
1" with 4 outlets, 1/2" sweat, 1 1/2" on center (F2761050) | 1 1/2" x 6' Copper Valveless Manifold with 24 outlets, 3/4" sweat (F2801575) | 2" x 6' Copper Valveless Manifold with 24 outlets, 3/4" sweat (F2802075) | |||||
ProPEX Copper Branch Multi-port Tee, 3 outlets |
|||||||
3/4" (LF2237550) | |||||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Manifolds¢ +++ [G] |
MLTPL |
Uponor Logo |
CSA B137.5 |
||||
Copper Branch Manifold |
|||||||
ProPEX 1" with 1/2" ProPEX LF brass outlets, 4 outlets (LF2801050) | 1" with 4 LF Brass outlets, 3/4" LF Brass ProPEX Inlet (LF2807550) | ProPEX 1" with 1/2" ProPEX LF brass outlets, 6 outlets (LF2811050) | 1" with 6 LF Brass outlets, 3/4" LF Brass ProPEX Inlet (LF2817550) | ||||
ProPEX 1" with 1/2" ProPEX LF brass outlets, 8 outlets (LF2821050) | 1" with 8 LF Brass outlets, 3/4" LF Brass ProPEX Inlet (LF2827550) | ProPEX 1" with 1/2" ProPEX LF brass outlets, 10 outlets (LF2831050) | 1" with 10 LF Brass outlets, 3/4" LF Brass ProPEX Inlet (LF2837550) | ||||
ProPEX 1" with 1/2" ProPEX LF brass outlets, 12 outlets (LF2841050) | 1"w/5LF 1/2" ProPEX Ball Valve outlets,3/4"LF ProPEX left-side inlet(LF2500050L) | 1"w/5LF 1/2"ProPEX Ball Valve outlets,3/4"LF ProPEX right-side inlet(LF2500050R) | 1"w/4LF 1/2" ProPEX Ball Valve outlets,3/4"LF ProPEX left-side inlet(LF2500040L) | ||||
1"w/4LF 1/2"ProPEX Ball Valve outlets,3/4"LF ProPEX right-side inlet(LF2500040R) | 1"w/3LF 1/2" ProPEX Ball Valve outlets,3/4"LF ProPEX left-side inlet(LF2500030L) | 1"w/3LF 1/2"ProPEX Ball Valve outlets,3/4"LF ProPEX right-side inlet(LF2500030R) | |||||
Copper Flow-through Multi-port Tee, 3 outlets |
|||||||
¾" x ¾" ProPEX (LF2237557) | |||||||
Copper Manifold |
|||||||
1" with LF Brass 1/2" ProPEX Ball Valve, 4 outlets (LF2500400) | 1" with LF Brass 1/2" ProPEX Ball Valve, 6 outlets (LF2500600) | 1" with LF Brass 1/2" ProPEX Ball Valve, 8 outlets (LF2500800) | 1" with LF Brass 1/2" ProPEX Ball Valve, 10 outlets (LF2501000) | ||||
1" with LF Brass 1/2" ProPEX Ball Valve, 12 outlets (LF2501200) | 1" x 6' with 24 LF Brass outlets, 1/2" ProPEX, 3" on center (LF2512450) | ||||||
Copper Valveless Manifold |
|||||||
1" with 2 outlets, 1/2" sweat, 1 1/2" on center (F2741050) | 1" with 2 outlets, 3/4"' sweat, 1 1/2" on center (F2741075) | 1" with 3 outlets, 1/2" sweat, 1 1/2" on center (F2751050) | 1" with 3 outlets, 3/4" sweat, 1 1/2" on center (F2751075) | ||||
1" with 4 outlets, 1/2" sweat, 1 1/2" on center (F2761050) | 1 1/2" x 6' Copper Valveless Manifold with 24 outlets, 3/4" sweat (F2801575) | 2" x 6' Copper Valveless Manifold with 24 outlets, 3/4" sweat (F2802075) | |||||
ProPEX Copper Branch Multi-port Tee, 3 outlets |
|||||||
3/4" (LF2237550) | |||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Radiant Floor Heating
Product Type | Material Type | Trade Name | Product Standard | ||||
Manifolds§ |
MLTPL |
Uponor Logo |
ASTM F877 |
||||
Copper Branch Manifold |
|||||||
1" with Two 1/2" ProPEX Ball Valves (Q28002500SPR) | 1" with Four 1/2" ProPEX Ball Valves (Q28004500SPR) | 1" with Eight 1/2" ProPEX Ball Valves (Q28004800SPR) | 1"w/5LF 1/2" ProPEX Ball Valve outlets,3/4"LF ProPEX left-side inlet(LF2500050L) | ||||
1"w/5LF 1/2"ProPEX Ball Valve outlets,3/4"LF ProPEX right-side inlet(LF2500050R) | 1"w/4LF 1/2" ProPEX Ball Valve outlets,3/4"LF ProPEX left-side inlet(LF2500040L) | 1"w/4LF 1/2"ProPEX Ball Valve outlets,3/4"LF ProPEX right-side inlet(LF2500040R) | 1"w/3LF 1/2" ProPEX Ball Valve outlets,3/4"LF ProPEX left-side inlet(LF2500030L) | ||||
1"w/3LF 1/2"ProPEX Ball Valve outlets,3/4"LF ProPEX right-side inlet(LF2500030R) | |||||||
Copper Manifold |
|||||||
2" x 4' with R20 Threaded Ball Valves, 12 Outlet (F2811220) | 2" x 4' with R25 Threaded Ball Valves, 12 Outlet (F2811225) | 2" x 4' with R20 Threaded Ball and Balancing Valves, 12 Outlet (F2821220) | 2" x 4' with R25 Threaded Ball and Balancing Valves, 12 Outlet (F2821225) | ||||
2" with 5/8" ProPEX Ball Valves, 12 Outlet (Q2811263) | 2" x 4' with 3/4" ProPEX Ball Valves, 12 Outlet (Q2811275) | 2" x 4' with 5/8" ProPEX Ball and Balancing Valves, 12 Outlet (Q2821263) | 2" x 4' with 3/4" ProPEX Ball and Balancing Valves, 12 Outlet (Q2821275) | ||||
Copper Valveless Manifold |
|||||||
2" x 4' with 5/8" ProPEX, 12 Outlet (Q2831263) | 2" x 4' with 3/4" ProPEX, 12 Outlet (Q2831275) | ||||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||||||
Manifolds¢ |
MLTPL |
Uponor Logo |
CSA B137.5 |
||||
Copper Branch Manifold |
|||||||
1" with Two 1/2" ProPEX Ball Valves (Q28002500SPR) | 1" with Four 1/2" ProPEX Ball Valves (Q28004500SPR) | 1" with Eight 1/2" ProPEX Ball Valves (Q28004800SPR) | 1"w/5LF 1/2" ProPEX Ball Valve outlets,3/4"LF ProPEX left-side inlet(LF2500050L) | ||||
1"w/5LF 1/2"ProPEX Ball Valve outlets,3/4"LF ProPEX right-side inlet(LF2500050R) | 1"w/4LF 1/2" ProPEX Ball Valve outlets,3/4"LF ProPEX left-side inlet(LF2500040L) | 1"w/4LF 1/2"ProPEX Ball Valve outlets,3/4"LF ProPEX right-side inlet(LF2500040R) | 1"w/3LF 1/2" ProPEX Ball Valve outlets,3/4"LF ProPEX left-side inlet(LF2500030L) | ||||
1"w/3LF 1/2"ProPEX Ball Valve outlets,3/4"LF ProPEX right-side inlet(LF2500030R) | |||||||
Copper Manifold |
|||||||
2" x 4' with R20 Threaded Ball Valves, 12 Outlet (F2811220) | 2" x 4' with R25 Threaded Ball Valves, 12 Outlet (F2811225) | 2" x 4' with R20 Threaded Ball and Balancing Valves, 12 Outlet (F2821220) | 2" x 4' with R25 Threaded Ball and Balancing Valves, 12 Outlet (F2821225) | ||||
2" with 5/8" ProPEX Ball Valves, 12 Outlet (Q2811263) | 2" x 4' with 3/4" ProPEX Ball Valves, 12 Outlet (Q2811275) | 2" x 4' with 5/8" ProPEX Ball and Balancing Valves, 12 Outlet (Q2821263) | 2" x 4' with 3/4" ProPEX Ball and Balancing Valves, 12 Outlet (Q2821275) | ||||
Copper Valveless Manifold |
|||||||
2" x 4' with 5/8" ProPEX, 12 Outlet (Q2831263) | 2" x 4' with 3/4" ProPEX, 12 Outlet (Q2831275) | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
Facility : Nastola, Finland
Potable Water - Pipe and Fittings
Product Type | Material Type | Trade Name | Product Standard | |||
Fittings¢ § +++ [1] [G] |
SP |
Uponor Logo (U/W) |
ASTM F1960 |
|||
ProPEX EP Coupling (PEX x PEX) |
||||||
1/2" (Q4775050/Q47750R10/Q47750R25) | ||||||
ProPEX EP Elbow (PEX x PEX) |
||||||
1/2" (Q4760500/Q4760500R5/Q4760500R25) | 3/4" (Q4760750/Q4760750R5/Q4760750R10) | 1" (Q4761000/Q4761000R5) | ||||
ProPEX EP Male Threaded Adapter (PEX x NPT) |
||||||
1/2" x 1/2" (Q4625050/Q46250R) | 3/4" x 3/4" (Q4627575/Q46275R5) | 1" x 1" (Q4621010) | ||||
ProPEX EP Plug (PEX) |
||||||
1/2" (Q4350500/Q4350500R5/Q4350500R50) | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Product may or may not bear the U.P. Code Mark. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Fittings¢ +++ [G] |
SP |
Uponor Logo (U/W) |
CSA B137.5 |
|||
ProPEX EP Coupling (PEX x PEX) |
||||||
1/2" (Q4775050/Q47750R10/Q47750R25) | ||||||
ProPEX EP Elbow (PEX x PEX) |
||||||
1/2" (Q4760500/Q4760500R5/Q4760500R25) | 3/4" (Q4760750/Q4760750R5/Q4760750R10) | 1" (Q4761000/Q4761000R5) | ||||
ProPEX EP Male Threaded Adapter (PEX x NPT) |
||||||
1/2" x 1/2" (Q4625050/Q46250R) | 3/4" x 3/4" (Q4627575/Q46275R5) | 1" x 1" (Q4621010) | ||||
ProPEX EP Plug (PEX) |
||||||
1/2" (Q4350500/Q4350500R5/Q4350500R50) | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Radiant Floor Heating
Product Type | Material Type | Trade Name | Product Standard | |||
Fittings¢ § [1] |
SP |
Uponor Logo (U/W) |
ASTM F1960 |
|||
ProPEX EP Elbow (PEX x PEX) |
||||||
3/4" (Q4760750) | 1" (Q4761000) | |||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Product may or may not bear the U.P. Code Mark. |
||||||
Fittings¢ |
SP |
Uponor Logo (U/W) |
CSA B137.5 |
|||
ProPEX EP Elbow (PEX x PEX) |
||||||
3/4" (Q4760750) | 1" (Q4761000) | |||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
Facility : Hassfurt, Germany
Potable Water - Pipe and Fittings
Product Type | Material Type | Trade Name | Product Standard | ||||
Fittings¢ § +++ [G] |
Brass |
Uponor Logo |
ASTM F1960 |
||||
Brass Adapter (PEX x Copper) |
|||||||
3/4” x 3/4” (LF4517575) | 3/4" x 3/4" (LF45175R) | ||||||
Brass Male Threaded Adapter (PEX x NPT) |
|||||||
3/4” x 3/4” (LF4527575) | 3/4" x 3/4" (LF45275R) | 1" x 1" (LF4521010) | 1" x 1" (LF45210R) | ||||
Brass Sweat Adapter (PEX x Copper) |
|||||||
1” x 1” (LF4511010) | 1" x 1" (LF45110R) | ||||||
ProPEX Drop Ear LF Brass Elbow (PEX x FIP) |
|||||||
1/2" x 3/8" (LF4235038) | 1/2" x 1/2" (LF4235050) | 1/2" x 1/2" (LF42350R/LF42350R10) | |||||
ProPEX LF Brass Elbow (PEX x MIP) |
|||||||
1/2" x 1/2" (LF4125050) | 1/2" x 1/2" (LF41250R) | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Fittings¢ § +++ [G] |
Brass |
Uponor Logo |
CSA B137.5 |
||||
Brass Adapter (PEX x Copper) |
|||||||
3/4” x 3/4” (LF4517575) | 3/4" x 3/4" (LF45175R) | ||||||
Brass Male Threaded Adapter (PEX x NPT) |
|||||||
3/4” x 3/4” (LF4527575) | 3/4" x 3/4" (LF45275R) | 1" x 1" (LF4521010) | 1" x 1" (LF45210R) | ||||
Brass Sweat Adapter (PEX x Copper) |
|||||||
1” x 1” (LF4511010) | 1" x 1" (LF45110R) | ||||||
ProPEX Drop Ear LF Brass Elbow (PEX x FIP) |
|||||||
1/2" x 3/8" (LF4235038) | 1/2" x 1/2" (LF4235050) | 1/2" x 1/2" (LF42350R/LF42350R10) | |||||
ProPEX LF Brass Elbow (PEX x MIP) |
|||||||
1/2" x 1/2" (LF4125050) | 1/2" x 1/2" (LF41250R) | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Radiant Floor Heating
Product Type | Material Type | Trade Name | Product Standard | |||
Fittings¢ § [1] |
Brass |
Uponor Logo |
ASTM F1960 |
|||
ProPEX Baseboard Elbow (PEX x Copper Adapter) |
||||||
3/4" x 3/4" (Q4387575) | 5/8" x 3/4" (Q4386375) | |||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Certified for use with Uponor manifolds only. |
||||||
Fittings¢ § [1] |
Brass |
Uponor Logo |
CSA B137.5 |
|||
ProPEX Baseboard Elbow (PEX x Copper Adapter) |
||||||
5/8" x 3/4" (Q4386375) | 3/4" x 3/4" (Q4387575) | |||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Certified for use with Uponor manifolds only. |
Facility : Brescia, Italy
Potable Water - Pipe and Fittings
Product Type | Material Type | Trade Name | Product Standard | ||||
Fittings¢ § +++ [G] |
Brass |
Uponor Logo |
ASTM F1960 |
||||
Brass Adapter (PEX x Copper) |
|||||||
1/2" x 1/2" (LF4515050) | 1/2" x 1/2" (LF45150R) | 1/2" x 1/2" (LF45150R25) | 3/4" x 3/4" (LF4517575) | ||||
3/4" x 3/4" (LF45175R) | |||||||
Brass Female Threaded Adapter (PEX x NPT) |
|||||||
1/2" x 1/2" (LF4575050) | 1/2" x 1/2" (LF45750R and LF45750R10) | 1/2" x 3/4" (LF4575075) | 1/2" x 3/4" (LF4575075R) | ||||
3/4" x 3/4" (LF4577575) | 1" x 1" (LF4571010) | 1" x 1" (LF45710R) | 1 1/4" x 1 1/4" (LF4571313) | ||||
1 1/2" x 1 1/2" (LF4751515) | 2" x 2" (LF4572020) | ||||||
Brass Fitting Adapter (PEX x Copper) |
|||||||
1/2" x 1/2" (LF4505050) | 1/2" x 1/2" (LF45050R) | 1/2" x 3/4" (LF4505075) | 3/4" x 3/4" (LF4507575) | ||||
3/4" x 3/4" (LF45075R) | 1" x 1" (LF4501010) | 1 1/4" x 1 1/4" (LF4501313) | |||||
Brass Male Threaded Adapter (PEX x NPT) |
|||||||
1/2" x 1/2" (LF4525050) | 3/4" x 3/4" (LF4527575) | 3/4" x 3/4" (LF45275R) | 3/4" x 1" (LF4527510) | ||||
3/4" x 1" (LF4527510R) | 1" x 3/4" (LF4521075) | 1" x 3/4" (LF4521075R) | 1" x 1" (LF4521010) | ||||
1" x 1" (LF45210R) | 1 1/4" x 1 1/4" (LF4521313) | 1 1/2" x 1 1/2" (LF4521515) | 2" x 2" (LF4522020) | ||||
Brass Sweat Adapter (PEX x Copper) |
|||||||
1/2" x 3/4" (LF4515075) | 1" x 1" (LF4511010) | 1" x 1" (LF45110R) | 1 1/4" x 1 1/4" (LF4511313) | ||||
LF4517550 - Brass Sweat Adapter (PEX x Copper) - 3/4" x 1/2" | LF4511515 - Brass Sweat Adapter (PEX x Copper) - 1 1/2" x 1 1/2" | LF4512020 - Brass Sweat Adapter (PEX x Copper) - 2" x 2" | |||||
Fire Sprinkler/ProPEX Brass Tee |
|||||||
3/4" PEX x 3/4" PEX x 1/2" FNPT (LF7707575) | 1" PEX x 1" PEX x 1/2" FNPT (LF7701010) | ||||||
ProPEX (LF) Brass Elbow |
|||||||
1/2" PEX x 1/2" Male CU (LF4730500) | 1/2" PEX x 1/2" MIP (LF4125050) | 1/2" PEX x 1/2" MIP (LF41250R) | 1/2" PEX x 1/2" PEX (LF4710500) | ||||
3/4" x 3/4" (LF4710750) | 1" x 1" (LF4711000) | 1 1/4" PEX x 1 1/4" PEX (LF4711250) | 1 1/2" PEX x 1 1/2" PEX (LF4711500) | ||||
ProPEX (LF) Brass Plug |
|||||||
3/8" PEX (LF4533838) | 1/2" PEX (LF4530500) | 3/4" PEX (LF4530750) | |||||
ProPEX (LF) Brass to PE Coupling |
|||||||
1/2" PEX x 1/2" PE (LF4585050) | 3/4" PEX x 3/4" PE (3/4" PEX x 3/4" PB) | 1" PEX x 1" PE (LF4591010) | |||||
ProPEX Drop Ear (LF) Brass Elbow |
|||||||
1/2" PEX x 3/8" FIP (LF4235038) | 1/2" PEX x 1/2" FIP (LF4235050) | 1/2" PEX x 1/2" FIP (LF42350R and LF42350R10) | 3/4" PEX x 3/4" FIP (LF4237575) | ||||
1" PEX x 1" FIP (LF4231010) | |||||||
ProPEX LF Brass Coupling |
|||||||
3/8" PEX x 1/2" PEX (LF4543850) | 1/2" PEX x 1/2" PEX (LF4545050) | 1/2" PEX x 3/4" PEX (LF4545075) | 3/4" x 3/4" (LF4547575) | ||||
3/4" x 1" (LF4547510) | 1" x 1" (LF4541010) | 1 1/4" PEX x 1" PEX (LF4541310) | 1 1/4" PEX x 1 1/4" PEX (LF4541313) | ||||
1 1/2" PEX x 1 1/4" PEX (LF4541513) | 1 1/2" PEX x 1 1/2" PEX (LF4541515) | 2" PEX x 1 1/2" PEX (LF4542015) | |||||
ProPEX LF Brass Female Threaded Adapter |
|||||||
1" PEX x 3/4" NPT (LF4571075) | |||||||
ProPEX LF Brass Reducing Tee |
|||||||
1/2" PEX x 1/2" PEX x 3/4" PEX (LF4705575) | 3/4" PEX x 1/2" PEX x 1/2" PEX (LF4707555) | 3/4" PEX x 1/2" PEX x 3/4" PEX (LF4707557) | 3/4" x 3/4" x 1/2" (LF4707550) | ||||
3/4" x 3/4" x 3/4" (LF4707575) | 3/4" x 3/4" x 1" (LF4707710) | 1" x 3/4" x 3/4" (LF4701775) | 1" x 3/4" x 1" (LF4701751) | ||||
1" x 1" x 1/2" (LF4701150) | 1" x 1" x 3/4" (LF4701175) | 1 1/4" PEX x 1 1/4" PEX x 3/4" PEX (LF4701337) | 1 1/2" PEX x 1 1/2" PEX x 3/4" PEX (LF4701557) | ||||
1 1/2" PEX x 1 1/2" PEX x 1" PEX (LF4701551) | |||||||
ProPEX LF Brass Sweat Adapter |
|||||||
1/2" (LF4995050) | |||||||
ProPEX LF Brass Tee |
|||||||
1/2" x 1/2" x 1/2" (LF4705050) | 1/2" Copper x 1/2" Copper x 1/2" Female NPT (LF4705125) | 1" x 1" x 1" (LF4701010) | |||||
Q&E/ProPEX Brass FS Elbow |
|||||||
3/4" PEX x 1/2" FNPT (LF7711050) | 3/4" PEX x 1/2" FNPT (LF7717550) | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Fittings¢ § +++ [G] |
Brass |
Uponor Logo |
CSA B137.5 |
||||
Brass Adapter (PEX x Copper) |
|||||||
1/2" x 1/2" (LF4515050) | 1/2" x 1/2" (LF45150R) | 1/2" x 1/2" (LF45150R25) | 3/4" x 3/4" (LF4517575) | ||||
3/4" x 3/4" (LF45175R) | |||||||
Brass Female Threaded Adapter (PEX x NPT) |
|||||||
1/2" x 1/2" (LF4575050) | 1/2" x 1/2" (LF45750R and LF45750R10) | 1/2" x 3/4" (LF4575075) | 1/2" x 3/4" (LF4575075R) | ||||
3/4" x 3/4" (LF4577575) | 1" x 1" (LF4571010) | 1" x 1" (LF45710R) | 1 1/4" x 1 1/4" (LF4571313) | ||||
1 1/2" x 1 1/2" (LF4751515) | 2" x 2" (LF4572020) | ||||||
Brass Fitting Adapter (PEX x Copper) |
|||||||
1/2" x 1/2" (LF4505050) | 1/2" x 1/2" (LF45050R) | 1/2" x 3/4" (LF4505075) | 3/4" x 3/4" (LF4507575) | ||||
3/4" x 3/4" (LF45075R) | 1" x 1" (LF4501010) | 1 1/4" x 1 1/4" (LF4501313) | |||||
Brass Male Threaded Adapter (PEX x NPT) |
|||||||
1/2" x 1/2" (LF4525050) | 3/4" x 3/4" (LF45275R) | 3/4" x 3/4" (LF4527575) | 3/4" x 1" (LF4527510R) | ||||
3/4" x 1” (LF4527510) | 1” x 3/4" (LF4521075) | 1" x 3/4" (LF4521075R) | 1 1/4" x 1 1/4" (LF4521313) | ||||
1 ½” x 1 ½” (LF4521515) | 2" x 2" (LF4522020) | ||||||
Brass Sweat Adapter (PEX x Copper) |
|||||||
1/2" x 3/4" (LF4515075) | 1" x 1" (LF4511010) | 1" x 1" (LF45110R) | 1 1/4" x 1 1/4" (LF4511313) | ||||
LF4517550 - Brass Sweat Adapter (PEX x Copper) - 3/4" x 1/2" | LF4511515 - Brass Sweat Adapter (PEX x Copper) - 1 1/2" x 1 1/2" | LF4512020 - Brass Sweat Adapter (PEX x Copper) - 2" x 2" | |||||
Fire Sprinkler/ProPEX Brass Tee |
|||||||
3/4" PEX x 3/4" PEX x 1/2" FNPT (LF7707575) | 1" PEX x 1" PEX x 1/2" FNPT (LF7701010) | ||||||
ProPEX (LF) Brass Elbow |
|||||||
1/2" PEX x 1/2" Male CU (LF4730500) | 1/2" PEX x 1/2" MIP (LF4125050) | 1/2" PEX x 1/2" MIP (LF41250R) | 1/2" PEX x 1/2" PEX (LF4710500) | ||||
3/4" x 3/4" (LF4710750) | 1" x 1" (LF4711000) | 1 1/4" PEX x 1 1/4" PEX (LF4711250) | 1 1/2" PEX x 1 1/2" PEX (LF4711500) | ||||
ProPEX (LF) Brass Plug |
|||||||
3/8" PEX (LF4533838) | 1/2" PEX (LF4530500) | 3/4" PEX (LF4530750) | |||||
ProPEX (LF) Brass to PE Coupling |
|||||||
1/2" PEX x 1/2" PE (LF4585050) | 3/4" PEX x 3/4" PE (LF4587575) | 1" PEX x 1" PE (LF4591010) | |||||
ProPEX Drop Ear (LF) Brass Elbow |
|||||||
1/2" PEX x 3/8" FIP (LF4235038) | 1/2" PEX x 1/2" FIP (LF4235050) | 1/2" PEX x 1/2" FIP (LF42350R and LF42350R10) | 3/4" PEX x 3/4" FIP (LF4237575) | ||||
1" PEX x 1" FIP (LF4231010) | |||||||
ProPEX LF Brass Coupling |
|||||||
3/8" PEX x 1/2" PEX (LF4543850) | 1/2" PEX x 1/2" PEX (LF4545050) | 1/2" PEX x 3/4" PEX (LF4545075) | 3/4" x 3/4" (LF4547575) | ||||
3/4" x 1" (LF4547510) | 1" x 1" (LF4541010) | 1 1/4" PEX x 1" PEX (LF4541310) | 1 1/4" PEX x 1 1/4" PEX (LF4541313) | ||||
1 1/2" PEX x 1 1/4" PEX (LF4541513) | 1 1/2" PEX x 1 1/2" PEX (LF4541515) | 2" PEX x 1 1/2" PEX (LF4542015) | |||||
ProPEX LF Brass Female Threaded Adapter |
|||||||
1" PEX x 3/4" NPT (LF4571075) | |||||||
ProPEX LF Brass Reducing Tee |
|||||||
1/2" PEX x 1/2" PEX x 3/4" PEX (LF4705575) | 3/4" PEX x 1/2" PEX x 1/2" PEX (LF4707555) | 3/4" PEX x 1/2" PEX x 3/4" PEX (LF4707557) | 3/4" x 3/4" x 1/2" (LF4707550) | ||||
3/4" x 3/4" x 3/4" (LF4707575) | 3/4" x 3/4" x 1" (LF4707710) | 1" x 3/4" x 3/4" (LF4701775) | 1" x 3/4" x 1" (1" x 3/4" x 1") | ||||
1" x 1" x 1/2" (LF4701150) | 1" x 1" x 3/4" (LF4701175) | 1 1/4" PEX x 1 1/4" PEX x 3/4" PEX (LF4701337) | 1 1/2" PEX x 1 1/2" PEX x 3/4" PEX (LF4701557) | ||||
1 1/2" PEX x 1 1/2" PEX x 1" PEX (LF4701551) | |||||||
ProPEX LF Brass Sweat Adapter |
|||||||
1/2" (LF4995050) | |||||||
ProPEX LF Brass Tee |
|||||||
1/2" x 1/2" x 1/2" (LF4705050) | 1/2" Copper x 1/2" Copper x 1/2" Female NPT (LF4705125) | 1" x 1" x 1" (LF4701010) | |||||
Q&E/ProPEX Brass FS Elbow |
|||||||
3/4" PEX x 1/2" FNPT (LF7711050) | 3/4" PEX x 1/2" FNPT (LF7717550) | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Valves¢ § +++ [G] |
Brass |
Uponor Logo |
ASTM F1960 |
||||
ProPEX LF Brass Ball Valve |
|||||||
1/2" PEX x 1/2" MIP (LF4795050 and LF47950R) | 1/2” PEX x 3/4” NH (LF4885075) | 1/2” PEX x 3/4” NH (LF4895075) | |||||
ProPEX LF Brass Ball Valve Large Bore |
|||||||
3/8" PEX x 1/2" Copper Adapter (LF4803850) | 1/2" PEX x 1/2" Copper Adapter (LF4805050 and LF48050R) | 3/4" PEX x 3/4" Copper Adapter (LF4807575) | |||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Valves+ ¢ § [G] [Q] |
Brass |
Uponor Logo |
ASTM F877 |
||||
Comp. Angle Stop Valve w/PEX Stiffener |
|||||||
1/2" Comp. x 3/8" OD Comp. (LF5415038 and LF5415038R) | |||||||
Comp. Straight Stop Valve w/PEX Stiffener |
|||||||
1/2" Comp. x 3/8" OD Comp. (LF5425038) | |||||||
Compression Angle Stop Valve (LF) Brass |
|||||||
1/2" PEX (LF4410500) | |||||||
Compression Straight Stop Valve (LF) Brass |
|||||||
1/2" PEX (LF4420500) | |||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per Section 9.5.1.1 of NSF/ANSI/CAN 61. |
|||||||
Valves+ ¢ § [G] [Q] |
Brass |
Uponor Logo |
CSA B137.5 |
||||
Comp. Angle Stop Valve w/PEX Stiffener |
|||||||
1/2" Comp. x 3/8" OD Comp. (LF5415038 and LF5415038R) | |||||||
Comp. Straight Stop Valve w/PEX Stiffener |
|||||||
1/2" Comp. x 3/8" OD Comp. (LF5425038) | |||||||
Compression Angle Stop Valve (LF) Brass |
|||||||
1/2" PEX (LF4410500) | |||||||
Compression Straight Stop Valve (LF) Brass |
|||||||
1/2" PEX (LF4420500) | |||||||
ProPEX Full Port (LF Brass) Angle Stop Valve |
|||||||
1/2" PEX (LF4855038) | 1/2" PEX x 3/8" OD Comp. (LF5855038) | 1/2" PEX x 3/8" OD Comp. (LF5855038R) | 1/2" PEX x 3/8" OD Comp. (LF5855038R6) | ||||
ProPEX Full Port (LF Brass) Straight Stop Valve |
|||||||
1/2" PEX (LF4865038) | 1/2" PEX x 3/8" OD Comp. (LF5865038 and LF5865038R) | ||||||
ProPEX LF Brass Ice Maker Valve |
|||||||
1/2" PEX x 1/4" Compression (LF4838811) | |||||||
ProPEX LF Brass Inline Ice Maker Tee |
|||||||
1/2" PEX x 1/2" PEX x 1/4" O.D. (LF4455050) | |||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per Section 9.5.1.1 of NSF/ANSI/CAN 61. |
|||||||
Valves+ ¢ § [G] [Q] |
Brass |
Uponor Logo |
ASTM F1960 |
||||
ProPEX Full Port (LF Brass) Angle Stop Valve |
|||||||
1/2" PEX (LF4855038) | 1/2" PEX x 3/8" OD Comp. (LF5855038) | 1/2" PEX x 3/8" OD Comp. (LF5855038R) | 1/2" PEX x 3/8" OD Comp. (LF5855038R6) | ||||
ProPEX Full Port (LF Brass) Straight Stop Valve |
|||||||
1/2" PEX (LF4865038) | 1/2" PEX x 3/8" OD Comp. (LF5865038 and LF5865038R) | ||||||
ProPEX LF Brass Ice Maker Valve |
|||||||
1/2" PEX x 1/4" Compression (LF4838811) | |||||||
ProPEX LF Brass Inline Ice Maker Tee |
|||||||
1/2" PEX x 1/2" PEX x 1/4" O.D. (LF4455050) | |||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per Section 9.5.1.1 of NSF/ANSI/CAN 61. |
|||||||
Valves¢ § +++ [1] [G] |
Brass |
Uponor Logo |
NSF 359 |
||||
ProPEX LF Brass Ball Valve Large Bore |
|||||||
1/2" PEX x 1/2" Copper Adapter (LF4805050 and LF48050R) | 3/4" PEX x 3/4" Copper Adapter (LF4807575) | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Valves rated at 200 psi at 200°F [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Valves¢ § +++ [G] |
Brass |
Uponor Logo (U/W) |
CSA B137.5 |
||||
ProPEX LF Brass Ball Valve Large Bore |
|||||||
1/2" PEX x 1/2" Copper Adapter (LF4805050 and LF48050R) | 3/4" PEX x 3/4" Copper Adapter (LF4807575) | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Radiant Floor Heating
Product Type | Material Type | Trade Name | Product Standard | ||||
Fittings¢ § [1] |
Brass |
Uponor Logo |
ASTM F1960 |
||||
Elbow |
|||||||
5/8" x 5/8" (Q4710625) | |||||||
ProPEX Baseboard Elbow, PEX x Copper Adapter |
|||||||
1/2" x 3/4" (Q4385075) | 3/4" x 3/4" (Q4387575) | ||||||
ProPEX Baseboard Elbow, PEXxCopper Fitting Adapter |
|||||||
1/2" x 3/4" (Q4375075) | 3/4" x 3/4" (Q4377575) | 5/8" x 3/4" (Q4376375) | |||||
ProPEX Baseboard Tee, PEX x Copper Adapter |
|||||||
3/4" x 3/4" (Q4397575) | |||||||
ProPEX Baseboard Tee, PEXxCopper Adapter-1/8" vent |
|||||||
1/2" x 3/4" (Q4395075) | |||||||
ProPEX Male Elbow Adapter |
|||||||
1 1/2" PEX x 1 1/2" NPT (A2791515) | |||||||
ProPEX Manifold Elbow Adapter |
|||||||
R32 x 3/4" (Q4153275) | R32 x 1" (Q4153210) | R32 x 1 1/4" (Q4153213) | R32 x 1 1/2" (Q4153215) | ||||
ProPEX Manifold Straight Adapter |
|||||||
R32 x 3/4" PEX (Q4143275) | R32 x 1" PEX (Q4143210) | R32 x 1 1/4" (Q4143213) | R32 x 1 1/2" (Q4143215) | ||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Certified for use with Uponor manifolds only. |
|||||||
Fittings¢ § [1] |
Brass |
Uponor Logo |
ASTM F877 |
||||
Brass Manifold Adapter |
|||||||
R32 x 3/4” Adapter (A4143210) | R32 x 1” Adapter (A4133210) | R32 x 1 1/4" (A4123215) | |||||
Threaded Brass Manifold Straight Adapter |
|||||||
R32 Male x R20 Male (A4143220) | |||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Certified for use with Uponor manifolds only. |
|||||||
Fittings¢ § [1] |
Brass |
Uponor Logo |
CSA B137.5 |
||||
Brass Manifold Adapter |
|||||||
R32 x 3/4" Adapter (A4143210) | R32 x 1" Adapter (A4133210) | R32 x 1 1/4" (A4123215) | |||||
Elbow |
|||||||
5/8" x 5/8" (Q4710625) | |||||||
ProPEX Baseboard Elbow, PEX x Copper Adapter |
|||||||
1/2" x 3/4" (Q4385075) | 3/4" x 3/4" (Q4387575) | ||||||
ProPEX Baseboard Elbow, PEXxCopper Fitting Adapter |
|||||||
1/2" x 3/4" (Q4375075) | 3/4" x 3/4" (Q4377575) | 5/8" x 3/4" (Q4376375) | |||||
ProPEX Baseboard Tee, PEX x Copper Adapter |
|||||||
3/4" x 3/4" (Q4397575) | |||||||
ProPEX Baseboard Tee, PEXxCopper Adapter-1/8" vent |
|||||||
1/2" x 3/4" (Q4395075) | |||||||
ProPEX Male Elbow Adapter |
|||||||
1 1/2" PEX x 1 1/2" NPT (A2791515) | |||||||
ProPEX Manifold Elbow Adapter |
|||||||
R32 x 3/4" (Q4153275) | R32 x 1" (Q4153210) | R32 x 1 1/4" (Q4153213) | R32 x 1 1/2" (Q4153215) | ||||
ProPEX Manifold Straight Adapter |
|||||||
R32 x 3/4” PEX (Q4143275) | R32 x 1” PEX (Q4143210) | R32 x 1 1/4" (Q4143213) | R32 x 1 1/2" (Q4143215) | ||||
Threaded Brass Manifold Straight Adapter |
|||||||
R32 Male x R20 Male (A4143220) | |||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Certified for use with Uponor manifolds only. |
|||||||
Valves¢ § +++ [2] [G] |
Brass |
Uponor Logo |
ASTM F1960 |
||||
ProPEX LF Brass Ball Valve Large Bore |
|||||||
3/4" PEX x 3/4" Copper Adapter (LF4807575) | 1/2" PEX x 1/2" Copper Adapter (LF4805050) | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Valves rated at 200 psi at 200°F. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Valves¢ § +++ [G] |
Brass |
Uponor Logo |
CSA B137.5 |
||||
ProPEX LF Brass Ball Valve Large Bore |
|||||||
3/4" PEX x 3/4" Copper Adapter (LF4807575) | 1/2" PEX x 1/2" Copper Adapter (LF4805050) | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : D'Opaglio (NO), Italy
Potable Water - Pipe and Fittings
Product Type | Material Type | Trade Name | Product Standard | ||||
Fittings¢ § +++ [G] |
Brass |
Uponor Log (U/W) |
ASTM F1960 |
||||
ProPEX LF Brass Copper Press Adapter |
|||||||
1/2" PEX x 1/2" Copper (LFP4515050/LFP45150R/LFP45150R10) | 3/4" PEX x 3/4" Copper (LFP4517575) | 1" PEX x 1" Copper (LFP4511010/LFP45110R) | 1 1/4" PEX x 1 1/4" Copper (LFP4511313) | ||||
1 1/2" PEX x 1 1/2" Copper (LFP4511515) | 2" PEX x 2" Copper (LFP4512020) | 2 1/2" PEX x 2 1/2" Copper (LFP4512525) | 3" PEX x 3" Copper (LFP4513030) | ||||
ProPEX LF Brass Copper Press Fitting Adapter |
|||||||
1/2" PEX x 1/2" Copper (LFP4505050) | 3/4" PEX x 3/4" Copper (LFP4507575) | 1" PEX x 1" Copper (LFP4501010) | 1 1/4" PEX x 1 1/4" Copper (LFP4501313) | ||||
1 1/2" PEX x 1 1/2" Copper (LFP4501515) | 2" PEX x 2" Copper (LFP4502020) | 2 1/2" PEX x 2 1/2" Copper (LFP4502525) | 3" PEX x 3" Copper (LFP4503030) | ||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Fittings¢ § +++ [G] |
Brass |
Uponor Log (U/W) |
CSA B137.5 |
||||
ProPEX LF Brass Copper Press Adapter |
|||||||
1/2" PEX x 1/2" Copper (LFP4515050/LFP45150R/LFP45150R10) | 3/4" PEX x 3/4" Copper (LFP4517575) | 1" PEX x 1" Copper (LFP4511010/LFP45110R) | 1 1/4" PEX x 1 1/4" Copper (LFP4511313) | ||||
1 1/2" PEX x 1 1/2" Copper (LFP4511515) | 2" PEX x 2" Copper (LFP4512020) | 2 1/2" PEX x 2 1/2" Copper (LFP4512525) | 3" PEX x 3" Copper (LFP4513030) | ||||
ProPEX LF Brass Copper Press Fitting Adapter |
|||||||
1/2" PEX x 1/2" Copper (LFP4505050) | 3/4" PEX x 3/4" Copper (LFP4507575) | 1" PEX x 1" Copper (LFP4501010) | 1 1/4" PEX x 1 1/4" Copper (LFP4501313) | ||||
1 1/2" PEX x 1 1/2" Copper (LFP4501515) | 2" PEX x 2" Copper (LFP4502020) | 2 1/2" PEX x 2 1/2" Copper (LFP4502525) | 3" PEX x 3" Copper (LFP4503030) | ||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Valves¢ § +++ [2] [G] |
Brass |
Uponor Logo (U/W) |
ASTM F1960 |
||||
ProPEX LF Elbow Water Meter (PEX x NPSM) |
|||||||
3/4" x 1" (WS4820751) | 1" x 1 1/4" (WS4821001) | ||||||
ProPEX LF Straight Water Meter Valve (PEX x NPSM) |
|||||||
3/4" x 1" (WS4820750) | 1" x 1 1/4" (WS4821000) | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Replacement Handles are available for these valves: WS5611001 (Replacement Handle for 3/4" Water Meter Valves) WS5611002 (Replacement Handle for 1" Water Meter Valves) [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Valves¢ § +++ [2] [G] |
Brass |
Uponor Logo (U/W) |
CSA B137.5 |
||||
ProPEX LF Elbow Water Meter (PEX x NPSM) |
|||||||
3/4" x 1" (WS4820751) | 1" x 1 1/4" (WS4821001) | ||||||
ProPEX LF Straight Water Meter Valve (PEX x NPSM) |
|||||||
3/4" x 1" (WS4820750) | 1" x 1 1/4" (WS4821000) | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Replacement Handles are available for these valves: WS5611001 (Replacement Handle for 3/4" Water Meter Valves) WS5611002 (Replacement Handle for 1" Water Meter Valves) [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Valves¢ § +++ [1] [2] [G] |
Brass |
Uponor Logo (U/W) |
NSF 359 |
||||
ProPEX LF Elbow Water Meter (PEX x NPSM) |
|||||||
3/4" x 1" (WS4820751) | 1" x 1 1/4" (WS4821001) | ||||||
ProPEX LF Straight Water Meter Valve (PEX x NPSM) |
|||||||
3/4" x 1" (WS4820750) | 1" x 1 1/4" (WS4821000) | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Valves rated at 100 psi at 180°F. [2] Replacement Handles are available for these valves: WS5611001 (Replacement Handle for 3/4" Water Meter Valves) WS5611002 (Replacement Handle for 1" Water Meter Valves) [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : Kungsor, Sweden
Potable Water - Pipe and Fittings
Product Type | Material Type | Trade Name | Product Standard | ||||
Fittings¢ § +++ [G] |
Brass |
Uponor Logo |
ASTM F1960 |
||||
ProPEX LF Brass Adapter (PEX x CTS Roll Groove) |
|||||||
2" x 2" (LFV2962020) | 2" x 2 1/2" (LFV2962025) | 2 1/2" x 2 1/2" (LFV2962525) | 3" x 3" (LFV2963030) | ||||
ProPEX LF Brass Adapter (PEX x IPS Roll Groove) |
|||||||
2" x 2" (LFV2972020) | 2" x 2 1/2" (LFV2972025) | 2 1/2" x 2" (LFV2972520) | 2 1/2" x 2 1/2" (LFV2972525) | ||||
2 1/2" x 3" (LFV2972530) | 3" x 2 1/2" (LFV2973025) | 3" x 3" (LFV2973030) | |||||
ProPEX LF Brass Female Threaded Adapter(PEX x NPT) |
|||||||
1/2" x 1/2" (LF4575050) | 1/2" x 1/2" (LF45750R) | 3/4" x 3/4" (LF4577575) | 1" x 1" (LF4571010) | ||||
1" x 1" (LF45710R/LF45750R10) | 1 1/4" x 1 1/4" (LF4571313) | 1 1/2" x 1 1/2" (LF4571515) | 2" x 2" (LF4572020) | ||||
ProPEX LF Brass Fitting Adapter (PEX x Copper) |
|||||||
1" x 1" (LF4501010) | |||||||
ProPEX LF Brass Flange Adapter Kit* |
|||||||
2 1/2" PEX (150 lb) (LF2982525) | 3" PEX (150 lb) (LF2983030) | ||||||
ProPEX LF Brass Male Threaded Adapter(PEX x NPT) |
|||||||
2 1/2" x 2 1/2" (LF4522525) | 3" x 3" (LF4523030) | ||||||
ProPEX LF Brass Sweat Adapter (PEX x Copper) |
|||||||
2 1/2" x 2 1/2" (LF4512525) | 3" x 3" (LF4513030) | ||||||
* Gasketed connection has not been evaluated by NSF. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Fittings¢ § +++ [G] |
Brass |
Uponor Logo |
CSA B137.5 |
||||
ProPEX LF Brass Adapter (PEX x CTS Roll Groove) |
|||||||
2" x 2" (LFV2962020) | 2" x 2 1/2" (LFV2962025) | 2 1/2" x 2 1/2" (LFV2962525) | 3" x 3" (LFV2963030) | ||||
ProPEX LF Brass Adapter (PEX x IPS Roll Groove) |
|||||||
2" x 2" (LFV2972020) | 2" x 2 1/2" (LFV2972025) | 2 1/2" x 2" (LFV2972520) | 2 1/2" x 2 1/2" (LFV2972525) | ||||
2 1/2" x 3" (LFV2972530) | 3" x 2 1/2" (LFV2973025) | 3" x 3" (LFV2973030) | |||||
ProPEX LF Brass Female Threaded Adapter(PEX x NPT) |
|||||||
1/2" x 1/2" (LF4575050) | 1/2" x 1/2" (LF45750R) | 3/4" x 3/4" (LF4577575) | 1" x 1" (LF4571010) | ||||
1" x 1" (LF45710R/LF45750R10) | 1 1/4" x 1 1/4" (LF4571313) | 1 1/2" x 1 1/2" (LF4571515) | 2" x 2" (LF4572020) | ||||
ProPEX LF Brass Fitting Adapter (PEX x Copper) |
|||||||
1" x 1" (LF4501010) | |||||||
ProPEX LF Brass Flange Adapter Kit* |
|||||||
2 1/2" PEX (150 lb) (LF2982525) | 3" PEX (150 lb) (LF2983030) | ||||||
ProPEX LF Brass Male Threaded Adapter(PEX x NPT) |
|||||||
2 1/2" x 2 1/2" (LF4522525) | 3" x 3" (LF4523030) | ||||||
ProPEX LF Brass Sweat Adapter (PEX x Copper) |
|||||||
2 1/2" x 2 1/2" (LF4512525) | 3" x 3" (LF4513030) | ||||||
* Gasketed connection has not been evaluated by NSF. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Radiant Floor Heating
Product Type | Material Type | Trade Name | Product Standard | ||||
Fittings¢ |
Brass |
Uponor Logo |
ASTM F1960 |
||||
ProPEX Brass Female Threaded Adapter (PEX x NPT) |
|||||||
1/2" x 1/2" (Q5575050) | 3/4" x 3/4" (Q5577575) | 3/4" x 1" (Q5577510) | 1" x 3/4" (Q5521075) | ||||
1" x 1" (Q5571010) | 1 1/4" x 1 1/4" (Q5571313) | 1 1/2" x 1 1/2" (Q5571515) | 2" x 2" (Q5572020) | ||||
ProPEX Brass Fitting Adapter (PEX x Cu) |
|||||||
1/2" x 1/2" (Q5505050) | 3/4" x 1/2" (Q5507550) | 3/4" x 3/4" (Q5507575) | 3/4" x 1" (Q5507510) | ||||
1" x 1" (Q5501010) | 1 1/4" x 1 1/4" (Q5501313) | 1 1/2" x 1 1/2" (Q5501515) | 2" x 2" (Q5502020) | ||||
ProPEX Brass Male Threaded Adapter (PEX x NPT) |
|||||||
1/2" x 1/2" (Q5525050) | 3/4" x 3/4" (Q5527575) | 3/4" x 1" (Q5527510) | 1" x 3/4" (Q5521075) | ||||
1" x 1" (Q5521010) | 1 1/4" x 1 1/4" (Q5521313) | 1 1/2" x 1 1/2" (Q5521515) | 2" x 2" (Q5522020) | ||||
ProPEX Brass Sweat Adapter (PEX x Cu) |
|||||||
1/2" x 1/2" (Q5515050) | 3/4" x 1/2" (Q5517550) | 3/4" x 3/4" (Q5517575) | 3/4" x 1" (Q5517510) | ||||
1" x 1" (Q5511010) | 1 1/4" x 1 1/4" (Q5511313) | 1 1/2" x 1 1/2" (Q5511515) | 2" x 2" (Q5512020) | ||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
|||||||
Fittings¢ |
Brass |
Uponor Logo |
CSA B137.5 |
||||
ProPEX Brass Female Threaded Adapter (PEX x NPT) |
|||||||
1/2" x 1/2" (Q5575050) | 3/4" x 3/4" (Q5577575) | 3/4" x 1" (Q5577510) | 1" x 3/4" (Q5521075) | ||||
1" x 1" (Q5571010) | 1 1/4" x 1 1/4" (Q5571313) | 1 1/2" x 1 1/2" (Q5571515) | 2" x 2" (Q5572020) | ||||
ProPEX Brass Fitting Adapter (PEX x Cu) |
|||||||
1/2" x 1/2" (Q5505050) | 3/4" x 1/2" (Q5507550) | 3/4" x 3/4" (Q5507575) | 3/4" x 1" (Q5507510) | ||||
1" x 1" (Q5501010) | 1 1/4" x 1 1/4" (Q5501313) | 1 1/2" x 1 1/2" (Q5501515) | 2" x 2" (Q5502020) | ||||
ProPEX Brass Male Threaded Adapter (PEX x NPT) |
|||||||
1/2" x 1/2" (Q5525050) | 3/4" x 3/4" (Q5527575) | 3/4" x 1" (Q5527510) | 1" x 3/4" (Q5521075) | ||||
1" x 1" (Q5521010) | 1 1/4" x 1 1/4" (Q5521313) | 1 1/2" x 1 1/2" (Q5521515) | 2" x 2" (Q5522020) | ||||
ProPEX Brass Sweat Adapter (PEX x Cu) |
|||||||
1/2" x 1/2" (Q5515050) | 3/4" x 1/2" (Q5517550) | 3/4" x 3/4" (Q5517575) | 3/4" x 1" (Q5517510) | ||||
1" x 1" (Q5511010) | 1 1/4" x 1 1/4" (Q5511313) | 1 1/2" x 1 1/2" (Q5511515) | 2" x 2" (Q5512020) | ||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
Number of matching Manufacturers is 1
Number of matching Products is 1947
Processing time was 1 seconds