NSF Product and Service Listings

These NSF Official Listings are current as of Saturday, January 4, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?Company=74630&Standard=014&

NSF/ANSI 14
Plastics Piping System Components and Related Materials

Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document

Rifeng Enterprise (Foshan) Co., Ltd.
5th/F, Rifeng Building
16 Zumiao Road
Foshan, Guangdong 528000
China
86 757 8230 1768

Facility : Foshan, China

Surface Burning Characteristics of Building Materials

Product Type	Material Type	Trade Name	Product Standard
Tubing# $ [2] [10]*	PEX	Rifeng	ASTM E84
3/8", 1/2" - 2"
# The Flame Spread Index and Smoke Developed Index for 1/2"-2" tubing are based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG installation instructions. The 3/8" tubing is not insulated. $ Certified for blue, natural, red, and white without oxygen barrier. * Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [10] ASTM E84, 1/2" - 2" The Flame Spread Index and Smoke Developed Index for 1/2" - 2" tubing are based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG installation instructions. The 3/8" tubing is not insulated.
Tubing$ & [2] [11]	PEX	Rifeng	CAN/ULC S102.2
3/8", 1/2" - 2"
$ Certified for blue, natural, red, and white without oxygen barrier. & 3/8" tubing (without insulation) shall be marked [cNSF®-fs ULc S102.2 FS <=25/SD <=50]. 1/2" - 2" tubing (with insulation), Flame Spread Index and Smoke Developed Index based on when the tubing is field insulated with JM Microlok HP Hi Performance Fiberglass insulation as per the pipe manufacturer's installation instructions. Tubing shall be Marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50]. [2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [11] 3/8" Tubing (without insulation) Tubing shall be marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50]. 1/2" through 2" Tubing (with insulation) Flame Spread Rating and Smoke Developed Classification based on when the tubing is field insulated with JM Microlok HP Hi Performance Fiberglass insulation as per the pipe manufacturer's installation instructions. Tubing shall be marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50].
Tubing[1] [3]	PEX	RIFENG PEX	ASTM E84
3/8" - 2"[2]
[2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [1] Certified for red and white PEX 5106 monowall pipe. [3] The Flame Spread Index and Smoke Developed Index are based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG installation instructions. Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50].
Tubing[1] [4]	PEX	RIFENG PEX	CAN/ULC S102.2
3/8" - 2"[2]
[2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [1] Certified for red and white PEX 5106 monowall pipe. [4] The Flame Spread Index and Smoke Developed Index are based on when the tubing is field insulated with 1/2" JM Microlok HP Hi Performance Fiberglass insulation as per the pipe manufacturer's installation instructions. Tubing shall be Marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50].
Tubing[5] [6]	PEX	RIFENG PEX	ASTM E84
3/8" - 1"[2]
[2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [5] Certified for blue, red and white PEX 5106 & 5306 2-layer skinned and 4-layer barrier pipe. [6] The Flame Spread Index and Smoke Developed Index are based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG installation instructions (all listed construction/color/size combinations greater than or equal to 3/8" in diameter). Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50].
Tubing[5] [7]	PEX	RIFENG PEX	CAN/ULC S102.2
3/8" - 1"[2]
[2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [5] Certified for blue, red and white PEX 5106 & 5306 2-layer skinned and 4-layer barrier pipe. [7] The Flame Spread Index and Smoke Developed Index are based on when the tubing is field insulated with 1/2" JM Microlok HP Hi Performance Fiberglass insulation as per the pipe manufacturer's installation instructions (all listed construction/color/size combinations greater than or equal to 3/8" in diameter). Tubing shall be Marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50].
Tubing[3] [8]	PEX	RIFENG PEXa	ASTM E84
1/8" - 3"[2]
[2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [3] The Flame Spread Index and Smoke Developed Index are based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG installation instructions. Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [8] Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8" 3/4", 1" sizes only.
Tubing[4] [8]	PEX	RIFENG PEXa	CAN/ULC S102.2
1/8" - 3"[2]
[2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [4] The Flame Spread Index and Smoke Developed Index are based on when the tubing is field insulated with 1/2" JM Microlok HP Hi Performance Fiberglass insulation as per the pipe manufacturer's installation instructions. Tubing shall be Marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50]. [8] Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8" 3/4", 1" sizes only.
Tubing[3] [9]	PEX	RIFENG PEXa	ASTM E84
1/8" - 3"[2]
[2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [3] The Flame Spread Index and Smoke Developed Index are based on when tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG installation instructions. Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. [9] Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, white, blue, orange, natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.
Tubing[4] [9]	PEX	RIFENG PEXa	CAN/ULC S102.2
1/8" - 3"[2]
[2] Flame Spread Index <= 25 Smoke Developed Index <= 50 [4] The Flame Spread Index and Smoke Developed Index are based on when the tubing is field insulated with 1/2" JM Microlok HP Hi Performance Fiberglass insulation as per the pipe manufacturer's installation instructions. Tubing shall be Marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50]. [9] Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, white, blue, orange, natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Ball Valves¢ § +++ [1] [G]	MLTPL	Rifeng Low Lead PEX Ball Valve	ASME A112.4.14/CSA B125.14
1/2" - 1 1/4"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Ball Valves rated at 125 PSI and 65C. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Compression Fittings (F1m) § +++ [2]*	MLTPL	RIFENG	ASTM F1807
3/8" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] For trade names, the use of "m" in trade name indicates use of C69300 alloy.
Compression Fittings (F1-G) § +++ [2]*	MLTPL	RIFENG	ASTM F1807
3/8" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] For trade names, the use of "m" in trade name indicates use of C69300 alloy.
Compression Fittings (F1m) § +++ [2]*	MLTPL	RIFENG	ASTM F877
3/8" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] For trade names, the use of "m" in trade name indicates use of C69300 alloy.
Compression Fittings (F1-G) § +++*	MLTPL	RIFENG	ASTM F877
3/8" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Compression Fittings (F1m) ¢ § +++ [2]*	MLTPL	RIFENG	CSA B137.5
3/8" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] For trade names, the use of "m" in trade name indicates use of C69300 alloy.
Compression Fittings (F1-G) ¢ § +++*	MLTPL	RIFENG	CSA B137.5
3/8" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Compression Fittings (F1-G) @ ¢ § +++ [G]*	MLTPL	R, Rifeng	ASTM F1281
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ Fittings tested as a system using Rifeng PEX / AL / PEX tubing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Compression Fittings (F1-G) @ ¢ § +++ [G]*	MLTPL	R, Rifeng	CSA B137.10
1/2" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ Fittings tested as a system using Rifeng PEX / AL / PEX tubing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Crimp Fittings (PF5m) § +++ [2]*	MLTPL	RIFENG	ASTM F1807
3/8" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] For trade names, the use of "m" in trade name indicates use of C69300 alloy.
Crimp Fittings (PF5-G) § +++*	MLTPL	RIFENG	ASTM F1807
3/8" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Crimp Fittings (PF5m) § +++ [2]*	MLTPL	RIFENG	ASTM F877
3/8" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] For trade names, the use of "m" in trade name indicates use of C69300 alloy.
Crimp Fittings (PF5-G) § +++*	MLTPL	RIFENG	ASTM F877
3/8" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Crimp Fittings (PF5m) ¢ § +++ [2]*	MLTPL	RIFENG	CSA B137.5
3/8" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] For trade names, the use of "m" in trade name indicates use of C69300 alloy.
Crimp Fittings (PF5-G) ¢ § +++*	MLTPL	RIFENG	CSA B137.5
3/8" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Crimp Fittings (PF5-G) ¢ § +++ [G]*	MLTPL	R, Rifeng	CSA B137.5
3/8" - 2-1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Crimp Fittings (PF5-G) § +++ [G]*	MLTPL	R, Rifeng	ASTM F1807
3/8" - 2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings[G]	Brass	RIFENG	ASTM F1960
RIFENG PF6
1/2" - 2"
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings[G]	Brass	RIFENG	ASTM F1960
RIFENG PF6m[3]
1/2" - 2"
[3] RIFENG PF6m uses alloy C69300. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings[G]	Brass	RIFENG	CSA B137.5
RIFENG PF6
1/2" - 2"
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings[G]	Brass	RIFENG	CSA B137.5
RIFENG PF6m[3]
1/2" - 2"
[3] RIFENG PF6m uses alloy C69300. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings[7]	PEX	RIFENG	ASTM F1960
RIFENG PEX Ring with Stop
3/8" - 2"
[7] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5. This is a non wetted product.
Fittings[7]	PEX	RIFENG	CSA B137.5
RIFENG PEX Ring with Stop
3/8" - 2"
[7] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5. This is a non wetted product.
Fittings+++ [G]	PPSU	RIFENG	ASTM F1960
End Cap
3/8" (PF6u-D 3/8)	1/2" (PF6u-D 1/2)	3/4" (PF6u-D 3/4)	1" (PF6u-D 1)
1 1/4" (PF6u-D 1 1/4)	1 1/2" (PF6u-D 1 1/2)	2" (PF6u-D 2)	2 1/2" (PF6u-D 2 1/2)
3" (PF6u-D 3)
Equal Elbow
3/8" (PF6u-L 3/8x3/8)	1/2" (PF6u-L 1/2x1/2)	3/4" (PF6u-L 3/4x3/4)	1" (PF6u-L 1x1)
1 1/4" (PF6u-L 1 1/4x1 1/4)	1 1/2" (PF6u-L 1 1/2x1 1/2)	2" (PF6u-L 2x2)	2 1/2" (PF6u-L 2 1/2x2 1/2)
3" (PF6u-L 3x3)
Equal Straight
3/8" (PF6u-S 3/8x3/8)	1/2" (PF6u-S 1/2x1/2)	3/4" (PF6u-S 3/4x3/4)	1" (PF6u-S 1x1)
1 1/4" (PF6u-S 1 1/4x1 1/4)	1 1/2" (PF6u-S 1 1/2x1 1/2)	2" (PF6u-S 2x2)	2 1/2" (PF6u-S 2 1/2x2 1/2)
3" (PF6u-S 3x3)
Equal Tee
3/8" (PF6u-T 3/8x3/8x3/8)	1/2" (PF6u-T 1/2x1/2x1/2)	3/4" (PF6u-T 3/4x3/4x3/4)	1" (PF6u-T 1x1x1)
1 1/4" (PF6u-T 1 1/4x1 1/4x1 1/4)	1 1/2" (PF6u-T 1 1/2x1 1/2x1 1/2)	2" (PF6u-T 2x2x2)	2 1/2" (PF6u-T 2 1/2x2 1/2x2 1/2)
3" (PF6u-T 3x3x3)
Female Equal Elbow
3/8" x 3/8"F (PF6u-L 3/8x3/8F)	1/2" x 1/2"F (PF6u-L 1/2x1/2F)	3/4" x 3/4"F (PF6u-L 3/4x3/4F)	1" x 1"F (PF6u-L 1x1F)
Female Equal Straight
3/8" x 3/8"F (PF6u-S 3/8x3/8F)	1/2" x 1/2"F (PF6u-S 1/2x1/2F)	3/4" x 3/4"F (PF6u-S 3/4x3/4F)	1" x 1"F (PF6u-S 1x1F)
1 1/4" x 1 1/4"F (PF6u-S 1 1/4x1 1/4F)	1 1/2" x 1 1/2"F (PF6u-S 1 1/2x1 1/2F)	2"x 2"F (PF6u-S 2x2F)	2 1/2" x 2 1/2"F (PF6u-S 2 1/2x2 1/2F)
3"x 3"F (PF6u-S 3x3F)
Female Equal Tee
3/8" x 3/8"F x 3/8" (PF6u-T 3/8x3/8Fx3/8)	1/2" x 1/2"F x 1/2" (PF6u-T 1/2x1/2Fx1/2)	3/4" x 3/4"F x 3/4" (PF6u-T 3/4x3/4Fx3/4)	1" x 1"F x 1" (PF6u-T 1x1Fx1)
Female Unequal Elbow
3/8" x 1/2"F (PF6u-L 3/8x1/2F)	1/2" x 3/4"F (PF6u-L 1/2x3/4F)	3/4" x 1"F (PF6u-L 3/4x1F)	1/2" x 1"F (PF6u-L 1/2x1F)
1/2" x 3/8"F (PF6u-L 1/2x3/8F)	3/4" x 1/2"F (PF6u-L 3/4x1/2F)	1" x 3/4"F (PF6u-L 1x3/4F)	1" x 1/2"F (PF6u-L 1x1/2F)
Female Unequal Straight
3/8" x 1/2"F (PF6u-S 3/8x1/2F)	1/2" x 3/4"F (PF6u-S 1/2x3/4F)	3/4" x 1"F (PF6u-S 3/4x1F)	1/2" x 1"F (PF6u-S 1/2x1F)
1 1/4" x 3/4"F (PF6u-S 1 1/4x3/4F)	1 1/4" x 1"F (PF6u-S 1 1/4x1F)	1 1/2" x 1 1/4"F (PF6u-S 1 1/2x1 1/4F)	2" x 1 1/4"F (PF6u-S 2x1 1/4F)
2" x 1 1/2"F (PF6u-S 2x1 1/2F)	2 1/2" x 1 1/4"F (PF6u-S 2 1/2x1 1/4F)	2 1/2" x 1 1/2"F (PF6u-S 2 1/2x1 1/2F)	3" x 2"F (PF6u-S 3x2F)
3" x 2 1/2"F (PF6u-S 3x2 1/2F)
Female Unequal Tee
3/8" x 1/2"F x 3/8" (PF6u-T 3/8x1/2Fx3/8)	1/2" x 3/4"F x 1/2" (PF6u-T 1/2x3/4Fx1/2)	3/4" x 1"F x 3/4" (PF6u-T 3/4x1Fx3/4)	1/2" x 1"F x 1/2" (PF6u-T 1/2x1Fx1/2)
1/2" x 3/8"F x 3/8" (PF6u-T 1/2x3/8Fx3/8)	3/4" x 1/2"F x 1/2" (PF6u-T 3/4x1/2Fx1/2)	1" x 3/4"F x 3/4" (PF6u-T 1x3/4Fx3/4)	1" x 1/2"F x 1/2" (PF6u-T 1x1/2Fx1/2)
1/2" x 1/2"F x 3/8" (PF6u-T 1/2x1/2Fx3/8)	3/4" x 3/4"F x 1/2" (PF6u-T 3/4x3/4Fx1/2)	1" x 1"F x 3/4" (PF6u-T 1x1Fx3/4)	1" x 1"F x 1/2" (PF6u-T 1x1Fx1/2)
1/2" x 3/8"F x 1/2" (PF6u-T 1/2x3/8Fx1/2)	3/4" x 1/2"F x 3/4" (PF6u-T 3/4x1/2Fx3/4)	1" x 3/4"F x 1" (PF6u-T 1x3/4Fx1)	1" x 1/2"F x 1" (PF6u-T 1x1/2Fx1)
Male Equal Elbow
3/8" x 3/8"M (PF6u-L 3/8x3/8M)	1/2" x 1/2"M (PF6u-L 1/2x1/2M)	3/4" x 3/4"M (PF6u-L 3/4x3/4M)	1" x 1"M (PF6u-L 1x1M)
1 1/4" x 1 1/4"M (PF6u-L 1 1/4x1 1/4M)	1 1/2" x 1 1/2"M (PF6u-L 1 1/2x1 1/2M)	2" x 2"M (PF6u-L 2x2M)	2 1/2" x 2 1/2"M (PF6u-L 2 1/2x2 1/2M)
3" x 3"M (PF6u-L 3x3M)
Male Equal Straight
3/8" x 3/8"M (PF6u-S 3/8x3/8M)	1/2" x 1/2"M (PF6u-S 1/2x1/2M)	3/4" x 3/4"M (PF6u-S 3/4x3/4M)	1" x 1"M (PF6u-S 1x1M)
1 1/4" x 1 1/4"M (PF6u-S 1 1/4x1 1/4M)	1 1/2" x 1 1/2"M (PF6u-S 1 1/2x1 1/2M)	2" x 2"M (PF6u-S 2x2M)	2 1/2" x 2 1/2"M (PF6u-S 2 1/2x2 1/2M)
3" x 3"M (PF6u-S 3x3M)
Male Equal Tee
3/8" x 3/8"M x 3/8" (PF6u-T 3/8x3/8Mx3/8)	1/2" x 1/2"M x 1/2" (PF6u-T 1/2x1/2Mx1/2)	3/4" x 3/4"M x 3/4" (PF6u-T 3/4x3/4Mx3/4)	1" x 1"M x 1" (PF6u-T 1x1Mx1)
1 1/4" x 1 1/4"M x 1 1/4" (PF6u-T 1 1/4x1 1/4Mx1 1/4)	1 1/2" x 1 1/2"M x 1 1/2" (PF6u-T 1 1/2x1 1/2Mx1 1/2)	2" x 2"M x 2" (PF6u-T 2x2Mx2)	2 1/2" x 2 1/2"M x 2 1/2" (PF6u-T 2 1/2x2 1/2Mx2 1/2)
3" x 3"M x 3" (PF6u-T 3x3Mx3)
Male Unequal Elbow
3/8" x 1/2"M (PF6u-L 3/8x1/2M)	1/2" x 3/4"M (PF6u-L 1/2x3/4M)	3/4" x 1"M (PF6u-L 3/4x1M)	1/2" x 1"M (PF6u-L 1/2x1M)
1/2" x 3/8"M (PF6u-L 1/2x3/8M)	3/4" x 1/2"M (PF6u-L 3/4x1/2M)	1" x 3/4"M (PF6u-L 1x3/4M)	1" x 1/2"M (PF6u-L 1x1/2M)
1 1/4" x 3/4"M (PF6u-L 1 1/4x3/4M)	1 1/4" x 1"M (PF6u-L 1 1/4x1M)	1 1/2" x 1 1/4"M (PF6u-L 1 1/2x1 1/4M)	2" x 1 1/4"M (PF6u-L 2x1 1/4M)
2" x 1 1/2"M (PF6u-L 2x1 1/2M)	2 1/2" x 1 1/4"M (PF6u-L 2 1/2x1 1/4M)	2 1/2" x 1 1/2"M (PF6u-L 2 1/2x1 1/2M)	3" x 2"M (PF6u-L 3x2M)
3" x 2 1/2"M (PF6u-L 3x2 1/2M)
Male Unequal Straight
3/8" x 1/2"M (PF6u-S 3/8x1/2M)	1/2" x 3/4"M (PF6u-S 1/2x3/4M)	3/4" x 1"M (PF6u-S 3/4x1M)	1/2" x 1"M (PF6u-S 1/2x1M)
1/2" x 3/8"M (PF6u-S 1/2x3/8M)	3/4" x 1/2"M (PF6u-S 3/4x1/2M)	1" x 3/4"M (PF6u-S 1x3/4M)	1" x 1/2"M (PF6u-S 1x1/2M)
1 1/4" x 3/4"M (PF6u-S1 1/4x3/4M)	1 1/4" x 1"M (PF6u-S 1 1/4x1M)	1 1/2" x 1 1/4"M (PF6u-S 1 1/2x1 1/4M)	2" x 1 1/4"M (PF6u-S 2x1 1/4M)
2" x 1 1/2"M (PF6u-S 2x1 1/2M)	2 1/2" x 1 1/4"M (PF6u-S 2 1/2x1 1/4M)	2 1/2" x 1 1/2"M (PF6u-S 2 1/2x1 1/2M)	3" x 2"M (PF6u-S 3x2M)
3" x 2 1/2"M (PF6u-S 3x2 1/2M)
Male Unequal Tee
3/8" x 1/2"M x 3/8" (PF6u-T 3/8x1/2Mx3/8)	1/2" x 3/4"M x 1/2" (PF6u-T 1/2x3/4Mx1/2)	3/4" x 1"M x 3/4" (PF6u-T 3/4x1Mx3/4)	1/2" x 1"M x 1/2" (PF6u-T 1/2x1Mx1/2)
1/2" x 3/8"M x 3/8" (PF6u-T 1/2x3/8Mx3/8)	3/4" x 1/2"M x 1/2" (PF6u-T 3/4x1/2Mx1/2)	1" x 3/4"M x 3/4" (PF6u-T 1x3/4Mx3/4)	1" x 1/2"M x 1/2" (PF6u-T 1x1/2Mx1/2)
1/2" x 1/2"M x 3/8" (PF6u-T 1/2x1/2Mx3/8)	3/4" x 3/4"M x 1/2" (PF6u-T 3/4x3/4Mx1/2)	1" x 1"M x 3/4" (PF6u-T 1x1Mx3/4)	1" x 1"M x 1/2" (PF6u-T 1x1Mx1/2)
1/2" x 3/8"M x 1/2" (PF6u-T 1/2x3/8Mx1/2)	3/4" x 1/2"M x 3/4" (PF6u-T 3/4x1/2Mx3/4)	1" x 3/4"M x 1" (PF6u-T 1x3/4Mx1)	1" x 1/2"M x 1" (PF6u-T 1x1/2Mx1)
Unequal Elbow
3/8" x 1/2" (PF6u-L 3/8x1/2)	1/2" x 3/4" (PF6u-L 1/2x3/4)	3/4" x 1" (PF6u-L 3/4x1)	1/2" x 1" (PF6u-L 1/2x1)
1 1/4" x 3/4" (PF6u-L 1 1/4x3/4)	1 1/4" x 1" (PF6u-L 1 1/4x1)	1 1/2" x 1 1/4" (PF6u-L 1 1/2x1 1/4)	2" x 1 1/4" (PF6u-L 2x1 1/4)
2" x 1 1/2" (PF6u-L 2x1 1/2)	2 1/2" x 1 1/4" (PF6u-L 2 1/2x1 1/4)	2 1/2" x 1 1/2" (PF6u-L 2 1/2x1 1/2)	3" x 2" (PF6u-L 3x2)
3" x 2 1/2" (PF6u-L 3x2 1/2)
Unequal Straight
3/8" x 1/2" (PF6u-S 3/8x1/2)	1/2" x 3/4" (PF6u-S 1/2x3/4)	3/4" x 1" (PF6u-S 3/4x1)	1/2" x 1" (PF6u-S 1/2x1)
1 1/4" x 3/4" (PF6u-S 1 1/4x3/4)	1 1/4" x 1" (PF6u-S 1 1/4x1)	1 1/2"x3/4" (PF6u-s 1 1/2x3/4)	1 1/2" x 1" (PF6u-s 1 1/2x1)
1 1/2" x 1 1/4" (PF6u-S 1 1/2x1 1/4)	2" x 1 1/4" (PF6u-S 2x1 1/4)	2" x 1 1/2" (PF6u-S 2x1 1/2)	2 1/2" x 1 1/4" (PF6u-S 2 1/2x1 1/4)
2 1/2" x 1 1/2" (PF6u-S 2 1/2x1 1/2)	3" x 2" (PF6u-S 3x2)	3" x 2 1/2" (PF6u-S 3x2 1/2)
Unequal Tee
3/8" x 1/2" x 3/8" (PF6u-T 3/8x1/2x3/8)	1/2" x 3/4" x 1/2" (PF6u-T 1/2x3/4x1/2)	3/4" x 3/4" x 1 1/4" (PF6u-T 3/4x3/4x1 1/4)	3/4" x 3/4" x 1 1/2" (PF6u-T 3/4x3/4x1 1/2)
3/4" x 1" x 3/4" (PF6u-T 3/4x1x3/4)	1/2" x 1" x 1/2" (PF6u-T 1/2x1x1/2)	1/2" x 3/8" x 3/8" (PF6u-T 1/2x3/8x3/8)	3/4" x 1/2" x 1/2" (PF6u-T 3/4x1/2x1/2)
1" x 3/4" x 3/4" (PF6u-T 1x3/4x3/4)	1" x 1/2" x 1/2" (PF6u-T 1x1/2x1/2)	1/2" x 1/2" x 3/8" (PF6u-T 1/2x1/2x3/8)	3/4" x 3/4" x 1/2" (PF6u-T 3/4x3/4x1/2)
1" x 1" x 3/4" (PF6u-T 1x1x3/4)	1" x 1" x 1/2" (PF6u-T 1x1x1/2)	1/2" x 3/8" x 1/2" (PF6u-T 1/2x3/8x1/2)	3/4" x 1/2" x 3/4" (PF6u-T 3/4x1/2x3/4)
1" x 3/4" x 1" (PF6u-T 1x3/4x1)	1" x 1/2" x 1" (PF6u-T 1x1/2x1)	1" x 1" x 1 1/2" (PF6u-T 1x1x1 1/2)	1" x 1" x 2" (PF6u-T 1x1x2)
1 1/4" x 1 1/4" x 3/4" (PF6u-T 1 1/4x1 1/4x3/4)	1 1/4" x 1 1/4" x 1" (PF6u-T 1 1/4x1 1/4x1)	1 1/4" x 1 1/4" x 1 1/2" (PF6u-T 1 1/4x1 1/4x1 1/2)	1 1/2" x 1 1/2" x 3/4" (PF6u-T 1 1/2x1 1/2x3/4)
1 1/2" x 1 1/2" x 1 1/4" (PF6u-T 1 1/2x1 1/2x1 1/4)	1 1/2" x 1 1/2" x 1" (PF6u-T 1 1/2x1 1/2x1)	2" x 2" x 1 1/2" (PF6u-T 2x2x1 1/2)	2" x 2" x 2 1/2" (PF6u-T 2x2x2 1/2)
2" x 2" x 3" (PF6u-T 2x2x3)	2 1/2" 2 1/2" x 1 1/2" (PF6u-T 2 1/2x2 1/2x1 1/2)	2 1/2" x 2 1/2" x 2" (PF6u-T 2 1/2x2 1/2x2)	2 1/2" x 2 1/2" x 3" (PF6u-T 2 1/2x2 1/2x3)
3" x 3" x 2" (PF6u-T 3x3x2)	3" x 3" x 2 1/2" (PF6u-T 3x3x2 1/2)	1 1/4" x 1/2" x 1 1/4" (PF6u-T 1 1/4x1/2x1 1/4)	1 1/4" x 3/4" x 1 1/4" (PF6u-T 1 1/4x3/4x1 1/4)
1 1/4" x 1" x 1 1/4" (PF6u-T 1 1/4x1x1 1/4)	1 1/2" x 1/2" x 1 1/2" (PF6u-T 1 1/2x1/2x1 1/2)	1 1/2" x 3/4" x 1 1/2" (PF6u-T 1 1/2x3/4x1 1/2)	1 1/2" x 1" x 1 1/2" (PF6u-T 1 1/2x1x1 1/2)
1 1/2" x 1 1/4" x 1 1/2" (PF6u-T 1 1/2x1 1/4x1 1/2)	2" x 1/2" x 2" (PF6u-T 2x1/2x2)	2" x 3/4" x 2" (PF6u-T 2x3/4x2)	2" x 1" x 2" (PF6u-T 2x1x2)
2" x 1 1/4" x 2" (PF6u-T 2x1 1/4x2)	2" x 1 1/2" x 2" (PF6u-T 2x1 1/2x2)	2 1/2" x 3/4" x 2 1/2" (PF6u-T 2 1/2x3/4x2 1/2)	2 1/2" x 1" x 2 1/2" (PF6u-T 2 1/2x1x2 1/2)
2 1/2" x 1 1/4" x 2 1/2" (PF6u-T 2 1/2x1 1/4x2 1/2)	2 1/2" x 1 1/2" x 2 1/2" (PF6u-T 2 1/2x1 1/2x2 1/2)	2 1/2" x 2" x 2 1/2" (PF6u-T 2 1/2x2x2 1/2)	3" x 3/4" x 3" (PF6u-T 3x3/4x3)
3" x 1" x 3" (PF6u-T 3x1x3)	3" x 1 1/4" x 3" (PF6u-T 3x1 1/4x3)	3" x 1 1/2" x 3" (PF6u-T 3x1 1/2x3)	3" x 2" x 3" (PF6u-T 3x2x3)
3" x 2 1/2" x 3" (PF6u-T 3x2 1/2x3)	3/4" x 1/2" x 3/8" (PF6u-T 3/4x1/2x3/8)	3/4" x 3/8" x 1/2" (PF6u-T 3/4x3/8x1/2)	1" x 3/4" x 1/2" (PF6u-T 1x3/4x1/2)
1" x 1/2" x 3/4" (PF6u-T 1x1/2x3/4)	1 1/4" x 1" x 3/4" (PF6u-T 1 1/4x1x3/4)	1 1/4" x 3/4" x 1" (PF6u-T 1 1/4x3/4x1)	1 1/2" x 3/4" x 1" (PF6u-T 1 1/2x3/4x1)
1 1/2" x 1" x 3/4" (PF6u-T 1 1/2x1x3/4)	1 1/2" x 3/4" x 1 1/4" (PF6u-T 1 1/2x3/4x1 1/4)	1 1/2" x 1 1/4" x 1" (PF6u-T 1 1/2x1 1/4x1)	1 1/2" x 1" x 1 1/4" (PF6u-T 1 1/2x1x1 1/4)
2" x 3/4" x 1 1/2" (PF6u-T 2x3/4x1 1/2)	2" x 1 1/2" x 3/4" (PF6u-T 2x1 1/2x3/4)	2" x 1" x 1 1/2" (PF6u-T 2x1x1 1/2)	2" x 1 1/4" x 1 1/2" (PF6u-T 2x1 1/4x1 1/2)
2" x 1 1/2" x 1 1/4" (PF6u-T 2x1 1/2x1 1/4)	2" x 1 1/2" x 1 1/2" (PF6u-T 2x1 1/2x1 1/2)	2 1/2" x 1 1/2" x 2" (PF6u-T 2 1/2x1 1/2x2)	2 1/2" x 2" x 1 1/2" (PF6u-T 2 1/2x2x1 1/2)
3" x 1 1/2" x 2 1/2" (PF6u-T 3x1 1/2x2 1/2)	3" x 2 1/2" x 1 1/2" (PF6u-T 3x2 1/2x1 1/2)	3" x 2" x 2 1/2" (PF6u-T 3x2x2 1/2)
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings¢ +++ [G]	PPSU	RIFENG	CSA B137.5
End Cap
3/8" (PF6u-D 3/8)	1/2" (PF6u-D 1/2)	3/4" (PF6u-D 3/4)	1" (PF6u-D 1)
1 1/4" (PF6u-D 1 1/4)	1 1/2" (PF6u-D 1 1/2)	2" (PF6u-D 2)	2 1/2" (PF6u-D 2 1/2)
3" (PF6u-D 3)
Equal Elbow
3/8" (PF6u-L 3/8x3/8)	1/2" (PF6u-L 1/2x1/2)	3/4" (PF6u-L 3/4x3/4)	1" (PF6u-L 1x1)
1 1/4" (PF6u-L 1 1/4x1 1/4)	1 1/2" (PF6u-L 1 1/2x1 1/2)	2" (PF6u-L 2x2)	2 1/2" (PF6u-L 2 1/2x2 1/2)
3" (PF6u-L 3x3)
Equal Straight
3/8" (PF6u-S 3/8x3/8)	1/2" (PF6u-S 1/2x1/2)	3/4" (PF6u-S 3/4x3/4)	1" (PF6u-S 1x1)
1 1/4" (PF6u-S 1 1/4x1 1/4)	1 1/2" (PF6u-S 1 1/2x1 1/2)	2" (PF6u-S 2x2)	2 1/2" (PF6u-S 2 1/2x2 1/2)
3" (PF6u-S 3x3)
Equal Tee
3/8" (PF6u-T 3/8x3/8x3/8)	1/2" (PF6u-T 1/2x1/2x1/2)	3/4" (PF6u-T 3/4x3/4x3/4)	1" (PF6u-T 1x1x1)
1 1/4" (PF6u-T 1 1/4x1 1/4x1 1/4)	1 1/2" (PF6u-T 1 1/2x1 1/2x1 1/2)	2" (PF6u-T 2x2x2)	2 1/2" (PF6u-T 2 1/2x2 1/2x2 1/2)
3" (PF6u-T 3x3x3)
Female Equal Elbow
3/8" x 3/8"F (PF6u-L 3/8x3/8F)	1/2" x 1/2"F (PF6u-L 1/2x1/2F)	3/4" x 3/4"F (PF6u-L 3/4x3/4F)	1" x 1"F (PF6u-L 1x1F)
Female Equal Straight
3/8" x 3/8"F (PF6u-S 3/8x3/8F)	1/2" x 1/2"F (PF6u-S 1/2x1/2F)	3/4" x 3/4"F (PF6u-S 3/4x3/4F)	1" x 1"F (PF6u-S 1x1F)
1 1/4" x 1 1/4"F (PF6u-S 1 1/4x1 1/4F)	1 1/2" x 1 1/2"F (PF6u-S 1 1/2x1 1/2F)	2"x 2"F (PF6u-S 2x2F)	2 1/2" x 2 1/2"F (PF6u-S 2 1/2x2 1/2F)
3"x 3"F (PF6u-S 3x3F)
Female Equal Tee
3/8" x 3/8"F x 3/8" (PF6u-T 3/8x3/8Fx3/8)	1/2" x 1/2"F x 1/2" (PF6u-T 1/2x1/2Fx1/2)	3/4" x 3/4"F x 3/4" (PF6u-T 3/4x3/4Fx3/4)	1" x 1"F x 1" (PF6u-T 1x1Fx1)
Female Unequal Elbow
3/8" x 1/2"F (PF6u-L 3/8x1/2F)	1/2" x 3/4"F (PF6u-L 1/2x3/4F)	3/4" x 1"F (PF6u-L 3/4x1F)	1/2" x 1"F (PF6u-L 1/2x1F)
1/2" x 3/8"F (PF6u-L 1/2x3/8F)	3/4" x 1/2"F (PF6u-L 3/4x1/2F)	1" x 3/4"F (PF6u-L 1x3/4F)	1" x 1/2"F (PF6u-L 1x1/2F)
Female Unequal Straight
3/8" x 1/2"F (PF6u-S 3/8x1/2F)	1/2" x 3/4"F (PF6u-S 1/2x3/4F)	3/4" x 1"F (PF6u-S 3/4x1F)	1/2" x 1"F (PF6u-S 1/2x1F)
1 1/4" x 3/4"F (PF6u-S 1 1/4x3/4F)	1 1/4" x 1"F (PF6u-S 1 1/4x1F)	1 1/2" x 1 1/4"F (PF6u-S 1 1/2x1 1/4F)	2" x 1 1/4"F (PF6u-S 2x1 1/4F)
2" x 1 1/2"F (PF6u-S 2x1 1/2F)	2 1/2" x 1 1/4"F (PF6u-S 2 1/2x1 1/4F)	2 1/2" x 1 1/2"F (PF6u-S 2 1/2x1 1/2F)	3" x 2"F (PF6u-S 3x2F)
3" x 2 1/2"F (PF6u-S 3x2 1/2F)
Female Unequal Tee
3/8" x 1/2"F x 3/8" (PF6u-T 3/8x1/2Fx3/8)	1/2" x 3/4"F x 1/2" (PF6u-T 1/2x3/4Fx1/2)	3/4" x 1"F x 3/4" (PF6u-T 3/4x1Fx3/4)	1/2" x 1"F x 1/2" (PF6u-T 1/2x1Fx1/2)
1/2" x 3/8"F x 3/8" (PF6u-T 1/2x3/8Fx3/8)	3/4" x 1/2"F x 1/2" (PF6u-T 3/4x1/2Fx1/2)	1" x 3/4"F x 3/4" (PF6u-T 1x3/4Fx3/4)	1" x 1/2"F x 1/2" (PF6u-T 1x1/2Fx1/2)
1/2" x 1/2"F x 3/8" (PF6u-T 1/2x1/2Fx3/8)	3/4" x 3/4"F x 1/2" (PF6u-T 3/4x3/4Fx1/2)	1" x 1"F x 3/4" (PF6u-T 1x1Fx3/4)	1" x 1"F x 1/2" (PF6u-T 1x1Fx1/2)
1/2" x 3/8"F x 1/2" (PF6u-T 1/2x3/8Fx1/2)	3/4" x 1/2"F x 3/4" (PF6u-T 3/4x1/2Fx3/4)	1" x 3/4"F x 1" (PF6u-T 1x3/4Fx1)	1" x 1/2"F x 1" (PF6u-T 1x1/2Fx1)
Male Equal Elbow
3/8" x 3/8"M (PF6u-L 3/8x3/8M)	1/2" x 1/2"M (PF6u-L 1/2x1/2M)	3/4" x 3/4"M (PF6u-L 3/4x3/4M)	1" x 1"M (PF6u-L 1x1M)
1 1/4" x 1 1/4"M (PF6u-L 1 1/4x1 1/4M)	1 1/2" x 1 1/2"M (PF6u-L 1 1/2x1 1/2M)	2" x 2"M (PF6u-L 2x2M)	2 1/2" x 2 1/2"M (PF6u-L 2 1/2x2 1/2M)
3" x 3"M (PF6u-L 3x3M)
Male Equal Straight
3/8" x 3/8"M (PF6u-S 3/8x3/8M)	1/2" x 1/2"M (PF6u-S 1/2x1/2M)	3/4" x 3/4"M (PF6u-S 3/4x3/4M)	1" x 1"M (PF6u-S 1x1M)
1 1/4" x 1 1/4"M (PF6u-S 1 1/4x1 1/4M)	1 1/2" x 1 1/2"M (PF6u-S 1 1/2x1 1/2M)	2" x 2"M (PF6u-S 2x2M)	2 1/2" x 2 1/2"M (PF6u-S 2 1/2x2 1/2M)
3" x 3"M (PF6u-S 3x3M)
Male Equal Tee
3/8" x 3/8"M x 3/8" (PF6u-T 3/8x3/8Mx3/8)	1/2" x 1/2"M x 1/2" (PF6u-T 1/2x1/2Mx1/2)	3/4" x 3/4"M x 3/4" (PF6u-T 3/4x3/4Mx3/4)	1" x 1"M x 1" (PF6u-T 1x1Mx1)
1 1/4" x 1 1/4"M x 1 1/4" (PF6u-T 1 1/4x1 1/4Mx1 1/4)	1 1/2" x 1 1/2"M x 1 1/2" (PF6u-T 1 1/2x1 1/2Mx1 1/2)	2" x 2"M x 2" (PF6u-T 2x2Mx2)	2 1/2" x 2 1/2"M x 2 1/2" (PF6u-T 2 1/2x2 1/2Mx2 1/2)
3" x 3"M x 3" (PF6u-T 3x3Mx3)
Male Unequal Elbow
3/8" x 1/2"M (PF6u-L 3/8x1/2M)	1/2" x 3/4"M (PF6u-L 1/2x3/4M)	3/4" x 1"M (PF6u-L 3/4x1M)	1/2" x 1"M (PF6u-L 1/2x1M)
1/2" x 3/8"M (PF6u-L 1/2x3/8M)	3/4" x 1/2"M (PF6u-L 3/4x1/2M)	1" x 3/4"M (PF6u-L 1x3/4M)	1" x 1/2"M (PF6u-L 1x1/2M)
1 1/4" x 3/4"M (PF6u-L 1 1/4x3/4M)	1 1/4" x 1"M (PF6u-L 1 1/4x1M)	1 1/2" x 1 1/4"M (PF6u-L 1 1/2x1 1/4M)	2" x 1 1/4"M (PF6u-L 2x1 1/4M)
2" x 1 1/2"M (PF6u-L 2x1 1/2M)	2 1/2" x 1 1/4"M (PF6u-L 2 1/2x1 1/4M)	2 1/2" x 1 1/2"M (PF6u-L 2 1/2x1 1/2M)	3" x 2"M (PF6u-L 3x2M)
3" x 2 1/2"M (PF6u-L 3x2 1/2M)
Male Unequal Straight
3/8" x 1/2"M (PF6u-S 3/8x1/2M)	1/2" x 3/4"M (PF6u-S 1/2x3/4M)	3/4" x 1"M (PF6u-S 3/4x1M)	1/2" x 1"M (PF6u-S 1/2x1M)
1/2" x 3/8"M (PF6u-S 1/2x3/8M)	3/4" x 1/2"M (PF6u-S 3/4x1/2M)	1" x 3/4"M (PF6u-S 1x3/4M)	1" x 1/2"M (PF6u-S 1x1/2M)
1 1/4" x 3/4"M (PF6u-S1 1/4x3/4M)	1 1/4" x 1"M (PF6u-S 1 1/4x1M)	1 1/2" x 1 1/4"M (PF6u-S 1 1/2x1 1/4M)	2" x 1 1/4"M (PF6u-S 2x1 1/4M)
2" x 1 1/2"M (PF6u-S 2x1 1/2M)	2 1/2" x 1 1/4"M (PF6u-S 2 1/2x1 1/4M)	2 1/2" x 1 1/2"M (PF6u-S 2 1/2x1 1/2M)	3" x 2"M (PF6u-S 3x2M)
3" x 2 1/2"M (PF6u-S 3x2 1/2M)
Male Unequal Tee
3/8" x 1/2"M x 3/8" (PF6u-T 3/8x1/2Mx3/8)	1/2" x 3/4"M x 1/2" (PF6u-T 1/2x3/4Mx1/2)	3/4" x 1"M x 3/4" (PF6u-T 3/4x1Mx3/4)	1/2" x 1"M x 1/2" (PF6u-T 1/2x1Mx1/2)
1/2" x 3/8"M x 3/8" (PF6u-T 1/2x3/8Mx3/8)	3/4" x 1/2"M x 1/2" (PF6u-T 3/4x1/2Mx1/2)	1" x 3/4"M x 3/4" (PF6u-T 1x3/4Mx3/4)	1" x 1/2"M x 1/2" (PF6u-T 1x1/2Mx1/2)
1/2" x 1/2"M x 3/8" (PF6u-T 1/2x1/2Mx3/8)	3/4" x 3/4"M x 1/2" (PF6u-T 3/4x3/4Mx1/2)	1" x 1"M x 3/4" (PF6u-T 1x1Mx3/4)	1" x 1"M x 1/2" (PF6u-T 1x1Mx1/2)
1/2" x 3/8"M x 1/2" (PF6u-T 1/2x3/8Mx1/2)	3/4" x 1/2"M x 3/4" (PF6u-T 3/4x1/2Mx3/4)	1" x 3/4"M x 1" (PF6u-T 1x3/4Mx1)	1" x 1/2"M x 1" (PF6u-T 1x1/2Mx1)
Unequal Elbow
3/8" x 1/2" (PF6u-L 3/8x1/2)	1/2" x 3/4" (PF6u-L 1/2x3/4)	3/4" x 1" (PF6u-L 3/4x1)	1/2" x 1" (PF6u-L 1/2x1)
1 1/4" x 3/4" (PF6u-L 1 1/4x3/4)	1 1/4" x 1" (PF6u-L 1 1/4x1)	1 1/2" x 1 1/4" (PF6u-L 1 1/2x1 1/4)	2" x 1 1/4" (PF6u-L 2x1 1/4)
2" x 1 1/2" (PF6u-L 2x1 1/2)	2 1/2" x 1 1/4" (PF6u-L 2 1/2x1 1/4)	2 1/2" x 1 1/2" (PF6u-L 2 1/2x1 1/2)	3" x 2" (PF6u-L 3x2)
3" x 2 1/2" (PF6u-L 3x2 1/2)
Unequal Straight
3/8" x 1/2" (PF6u-S 3/8x1/2)	1/2" x 3/4" (PF6u-S 1/2x3/4)	3/4" x 1" (PF6u-S 3/4x1)	1/2" x 1" (PF6u-S 1/2x1)
1 1/4" x 3/4" (PF6u-S 1 1/4x3/4)	1 1/4" x 1" (PF6u-S 1 1/4x1)	1 1/2"x3/4" (PF6u-s 1 1/2x3/4)	1 1/2" x 1" (PF6u-s 1 1/2x1)
1 1/2" x 1 1/4" (PF6u-S 1 1/2x1 1/4)	2" x 1 1/4" (PF6u-S 2x1 1/4)	2" x 1 1/2" (PF6u-S 2x1 1/2)	2 1/2" x 1 1/4" (PF6u-S 2 1/2x1 1/4)
2 1/2" x 1 1/2" (PF6u-S 2 1/2x1 1/2)	3" x 2" (PF6u-S 3x2)	3" x 2 1/2" (PF6u-S 3x2 1/2)
Unequal Tee
3/8" x 1/2" x 3/8" (PF6u-T 3/8x1/2x3/8)	1/2" x 3/4" x 1/2" (PF6u-T 1/2x3/4x1/2)	3/4" x 3/4" x 1 1/4" (PF6u-T 3/4x3/4x1 1/4)	3/4" x 3/4" x 1 1/2" (PF6u-T 3/4x3/4x1 1/2)
3/4" x 1" x 3/4" (PF6u-T 3/4x1x3/4)	1/2" x 1" x 1/2" (PF6u-T 1/2x1x1/2)	1/2" x 3/8" x 3/8" (PF6u-T 1/2x3/8x3/8)	3/4" x 1/2" x 1/2" (PF6u-T 3/4x1/2x1/2)
1" x 3/4" x 3/4" (PF6u-T 1x3/4x3/4)	1" x 1/2" x 1/2" (PF6u-T 1x1/2x1/2)	1/2" x 1/2" x 3/8" (PF6u-T 1/2x1/2x3/8)	3/4" x 3/4" x 1/2" (PF6u-T 3/4x3/4x1/2)
1" x 1" x 3/4" (PF6u-T 1x1x3/4)	1" x 1" x 1/2" (PF6u-T 1x1x1/2)	1/2" x 3/8" x 1/2" (PF6u-T 1/2x3/8x1/2)	3/4" x 1/2" x 3/4" (PF6u-T 3/4x1/2x3/4)
1" x 3/4" x 1" (PF6u-T 1x3/4x1)	1" x 1/2" x 1" (PF6u-T 1x1/2x1)	1" x 1" x 1 1/2" (PF6u-T 1x1x1 1/2)	1" x 1" x 2" (PF6u-T 1x1x2)
1 1/4" x 1 1/4" x 3/4" (PF6u-T 1 1/4x1 1/4x3/4)	1 1/4" x 1 1/4" x 1" (PF6u-T 1 1/4x1 1/4x1)	1 1/4" x 1 1/4" x 1 1/2" (PF6u-T 1 1/4x1 1/4x1 1/2)	1 1/2" x 1 1/2" x 3/4" (PF6u-T 1 1/2x1 1/2x3/4)
1 1/2" x 1 1/2" x 1 1/4" (PF6u-T 1 1/2x1 1/2x1 1/4)	1 1/2" x 1 1/2" x 1" (PF6u-T 1 1/2x1 1/2x1)	2" x 2" x 1 1/2" (PF6u-T 2x2x1 1/2)	2" x 2" x 2 1/2" (PF6u-T 2x2x2 1/2)
2" x 2" x 3" (PF6u-T 2x2x3)	2 1/2" 2 1/2" x 1 1/2" (PF6u-T 2 1/2x2 1/2x1 1/2)	2 1/2" x 2 1/2" x 2" (PF6u-T 2 1/2x2 1/2x2)	2 1/2" x 2 1/2" x 3" (PF6u-T 2 1/2x2 1/2x3)
3" x 3" x 2" (PF6u-T 3x3x2)	3" x 3" x 2 1/2" (PF6u-T 3x3x2 1/2)	1 1/4" x 1/2" x 1 1/4" (PF6u-T 1 1/4x1/2x1 1/4)	1 1/4" x 3/4" x 1 1/4" (PF6u-T 1 1/4x3/4x1 1/4)
1 1/4" x 1" x 1 1/4" (PF6u-T 1 1/4x1x1 1/4)	1 1/2" x 1/2" x 1 1/2" (PF6u-T 1 1/2x1/2x1 1/2)	1 1/2" x 3/4" x 1 1/2" (PF6u-T 1 1/2x3/4x1 1/2)	1 1/2" x 1" x 1 1/2" (PF6u-T 1 1/2x1x1 1/2)
1 1/2" x 1 1/4" x 1 1/2" (PF6u-T 1 1/2x1 1/4x1 1/2)	2" x 1/2" x 2" (PF6u-T 2x1/2x2)	2" x 3/4" x 2" (PF6u-T 2x3/4x2)	2" x 1" x 2" (PF6u-T 2x1x2)
2" x 1 1/4" x 2" (PF6u-T 2x1 1/4x2)	2" x 1 1/2" x 2" (PF6u-T 2x1 1/2x2)	2 1/2" x 3/4" x 2 1/2" (PF6u-T 2 1/2x3/4x2 1/2)	2 1/2" x 1" x 2 1/2" (PF6u-T 2 1/2x1x2 1/2)
2 1/2" x 1 1/4" x 2 1/2" (PF6u-T 2 1/2x1 1/4x2 1/2)	2 1/2" x 1 1/2" x 2 1/2" (PF6u-T 2 1/2x1 1/2x2 1/2)	2 1/2" x 2" x 2 1/2" (PF6u-T 2 1/2x2x2 1/2)	3" x 3/4" x 3" (PF6u-T 3x3/4x3)
3" x 1" x 3" (PF6u-T 3x1x3)	3" x 1 1/4" x 3" (PF6u-T 3x1 1/4x3)	3" x 1 1/2" x 3" (PF6u-T 3x1 1/2x3)	3" x 2" x 3" (PF6u-T 3x2x3)
3" x 2 1/2" x 3" (PF6u-T 3x2 1/2x3)	3/4" x 1/2" x 3/8" (PF6u-T 3/4x1/2x3/8)	3/4" x 3/8" x 1/2" (PF6u-T 3/4x3/8x1/2)	1" x 3/4" x 1/2" (PF6u-T 1x3/4x1/2)
1" x 1/2" x 3/4" (PF6u-T 1x1/2x3/4)	1 1/4" x 1" x 3/4" (PF6u-T 1 1/4x1x3/4)	1 1/4" x 3/4" x 1" (PF6u-T 1 1/4x3/4x1)	1 1/2" x 3/4" x 1" (PF6u-T 1 1/2x3/4x1)
1 1/2" x 1" x 3/4" (PF6u-T 1 1/2x1x3/4)	1 1/2" x 3/4" x 1 1/4" (PF6u-T 1 1/2x3/4x1 1/4)	1 1/2" x 1 1/4" x 1" (PF6u-T 1 1/2x1 1/4x1)	1 1/2" x 1" x 1 1/4" (PF6u-T 1 1/2x1x1 1/4)
2" x 3/4" x 1 1/2" (PF6u-T 2x3/4x1 1/2)	2" x 1 1/2" x 3/4" (PF6u-T 2x1 1/2x3/4)	2" x 1" x 1 1/2" (PF6u-T 2x1x1 1/2)	2" x 1 1/4" x 1 1/2" (PF6u-T 2x1 1/4x1 1/2)
2" x 1 1/2" x 1 1/4" (PF6u-T 2x1 1/2x1 1/4)	2" x 1 1/2" x 1 1/2" (PF6u-T 2x1 1/2x1 1/2)	2 1/2" x 1 1/2" x 2" (PF6u-T 2 1/2x1 1/2x2)	2 1/2" x 2" x 1 1/2" (PF6u-T 2 1/2x2x1 1/2)
3" x 1 1/2" x 2 1/2" (PF6u-T 3x1 1/2x2 1/2)	3" x 2 1/2" x 1 1/2" (PF6u-T 3x2 1/2x1 1/2)	3" x 2" x 2 1/2" (PF6u-T 3x2x2 1/2)
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings+++ [G]	PPSU	RIFENG	ASTM F2159
End Cap
3/8" (PF5u-D 3/8)	1/2" (PF5u-D 1/2)	3/4" (PF5u-D 3/4)	1" (PF5u-D 1)
Equal Elbow
3/8" (PF5u-L 3/8x3/8)	1/2" (PF5u-L 1/2x1/2)	3/4" (PF5u-L 3/4x3/4)	1" (PF5u-L 1x1)
Equal Straight
3/8" (PF5u-S 3/8x3/8)	1/2" (PF5u-S 1/2x1/2)	3/4" (PF5u-S 3/4x3/4)	1" (PF5u-S 1x1)
Equal Tee
3/8" (PF5u-T 3/8x3/8x3/8)	1/2" (PF5u-T 1/2x1/2x1/2)	3/4" (PF5u-T 3/4x3/4x3/4)	1" (PF5u-T 1x1x1)
Female Equal Elbow
3/8" x 3/8"F (PF5u-L 3/8x3/8F)	1/2" x 1/2"F (PF5u-L 1/2x1/2F)	3/4" x 3/4"F (PF5u-L 3/4x3/4F)	1" x 1"F (PF5u-L 1x1F)
Female Equal Straight
3/8" x 3/8"F (PF5u-S 3/8x3/8F)	1/2" x 1/2"F (PF5u-S 1/2x1/2F)	3/4" x 3/4"F (PF5u-S 3/4x3/4F)	1" x 1"F (PF5u-S 1x1F)
Female Equal Tee
3/8" x 3/8"F x 3/8" (PF5u-T 3/8x3/8Fx3/8)	1/2" x 1/2"F x 1/2" (PF5u-T 1/2x1/2Fx1/2)	3/4" x 3/4"F x 3/4" (PF5u-T 3/4x3/4Fx3/4)	1" x 1"F x 1" (PF5u-T 1x1Fx1)
Female Unequal Elbow
3/8" x 1/2"F (PF5u-L 3/8x1/2F)	1/2" x 3/4"F (PF5u-L 1/2x3/4F)	3/4" x 1"F (PF5u-L 3/4x1F)	1/2" x 1"F (PF5u-L 1/2x1F)
1/2" x 3/8"F (PF5u-L 1/2x3/8F)	3/4" x 1/2"F (PF5u-L 3/4x1/2F)	1" x 3/4"F (PF5u-L 1x3/4F)	1" x 1/2"F (PF5u-L 1x1/2F)
Female Unequal Straight
3/8" x 1/2"F (PF5u-S 3/8x1/2F)	1/2" x 3/4"F (PF5u-S 1/2x3/4F)	3/4" x 1"F (PF5u-S 3/4x1F)	1/2" x 1"F (PF5u-S 1/2x1F)
Female Unequal Tee
3/8" x 1/2"F x 3/8" (PF5u-T 3/8x1/2Fx3/8)	1/2" x 3/4"F x 1/2" (PF5u-T 1/2x3/4Fx1/2)	3/4" x 1"F x 3/4" (PF5u-T 3/4x1Fx3/4)	1/2" x 1"F x 1/2" (PF5u-T 1/2x1Fx1/2)
1/2" x 3/8"F x 3/8" (PF5u-T 1/2x3/8Fx3/8)	3/4" x 1/2"F x 1/2" (PF5u-T 3/4x1/2Fx1/2)	1" x 3/4"F x 3/4" (PF5u-T 1x3/4Fx3/4)	1" x 1/2"F x 1/2" (PF5u-T 1x1/2Fx1/2)
1/2" x 1/2"F x 3/8" (PF5u-T 1/2x1/2Fx3/8)	3/4" x 3/4"F x 1/2" (PF5u-T 3/4x3/4Fx1/2)	1" x 1"F x 3/4" (PF5u-T 1x1Fx3/4)	1" x 1"F x 1/2" (PF5u-T 1x1Fx1/2)
1/2" x 3/8"F x 1/2" (PF5u-T 1/2x3/8Fx1/2)	3/4" x 1/2"F x 3/4" (PF5u-T 3/4x1/2Fx3/4)	1" x 3/4"F x 1" (PF5u-T 1x3/4Fx1)	1" x 1/2"F x 1" (PF5u-T 1x1/2Fx1)
Male Equal Elbow
3/8" x 3/8"M (PF5u-L 3/8x3/8M)	1/2" x 1/2"M (PF5u-L 1/2x1/2M)	3/4" x 3/4"M (PF5u-L 3/4x3/4M)	1" x 1"M (PF5u-L 1x1M)
Male Equal Straight
3/8" x 3/8"M (PF5u-S 3/8x3/8M)	1/2" x 1/2"M (PF5u-S 1/2x1/2M)	3/4" x 3/4"M (PF5u-S 3/4x3/4M)	1" x 1"M (PF5u-S 1x1M)
Male Equal Tee
3/8" x 3/8"M x 3/8" (PF5u-T 3/8x3/8Mx3/8)	1/2" x 1/2"M x 1/2" (PF5u-T 1/2x1/2Mx1/2)	3/4" x 3/4"M x 3/4" (PF5u-T 3/4x3/4Mx3/4)	1" x 1"M x 1" (PF5u-T 1x1Mx1)
Male Unequal Elbow
3/8" x 1/2"M (PF5u-L 3/8x1/2M)	1/2" x 3/4"M (PF5u-L 1/2x3/4M)	3/4" x 1"M (PF5u-L 3/4x1M)	1/2" x 1"M (PF5u-L 1/2x1M)
1/2" x 3/8"M (PF5u-L 1/2x3/8M)	3/4" x 1/2"M (PF5u-L 3/4x1/2M)	1" x 3/4"M (PF5u-L 1x3/4M)	1" x 1/2"M (PF5u-L 1x1/2M)
Male Unequal Straight
3/8" x 1/2"M (PF5u-S 3/8x1/2M)	1/2" x 3/4"M (PF5u-S 1/2x3/4M)	3/4" x 1"M (PF5u-S 3/4x1M)	1/2" x 1"M (PF5u-S 1/2x1M)
1/2" x 3/8"M (PF5u-S 1/2x3/8M)	3/4" x 1/2"M (PF5u-S 3/4x1/2M)	1" x 3/4"M (PF5u-S 1x3/4M)	1" x 1/2"M (PF5u-S 1x1/2M)
Male Unequal Tee
3/8" x 1/2"M x 3/8" (PF5u-T 3/8x1/2Mx3/8)	1/2" x 3/4"M x 1/2" (PF5u-T 1/2x3/4Mx1/2)	3/4" x 1"M x 3/4" (PF5u-T 3/4x1Mx3/4)	1/2" x 1"M x 1/2" (PF5u-T 1/2x1Mx1/2)
1/2" x 3/8"M x 3/8" (PF5u-T 1/2x3/8Mx3/8)	3/4" x 1/2"M x 1/2" (PF5u-T 3/4x1/2Mx1/2)	1" x 3/4"M x 3/4" (PF5u-T 1x3/4Mx3/4)	1" x 1/2"M x 1/2" (PF5u-T 1x1/2Mx1/2)
1/2" x 1/2"M x 3/8" (PF5u-T 1/2x1/2Mx3/8)	3/4" x 3/4"M x 1/2" (PF5u-T 3/4x3/4Mx1/2)	1" x 1"M x 3/4" (PF5u-T 1x1Mx3/4)	1" x 1"M x 1/2" (PF5u-T 1x1Mx1/2)
1/2" x 3/8"M x 1/2" (PF5u-T 1/2x3/8Mx1/2)	3/4" x 1/2"M x 3/4" (PF5u-T 3/4x1/2Mx3/4)	1" x 3/4"M x 1" (PF5u-T 1x3/4Mx1)	1" x 1/2"M x 1" (PF5u-T 1x1/2Mx1)
Unequal Elbow
3/8" x 1/2" (PF5u-L 3/8x1/2)	1/2" x 3/4" (PF5u-L 1/2x3/4)	3/4" x 1" (PF5u-L 3/4x1)	1/2" x 1" (PF5u-L 1/2x1)
Unequal Straight
3/8" x 1/2" (PF5u-S 3/8x1/2)	1/2" x 3/4" (PF5u-S 1/2x3/4)	3/4" x 1" (PF5u-S 3/4x1)	1/2" x 1" (PF5u-S 1/2x1)
Unequal Tee
3/8" x 1/2" x 3/8" (PF5u-T 3/8x1/2x3/8)	1/2" x 3/4" x 1/2" (PF5u-T 1/2x3/4x1/2)	3/4" x 1" x 3/4" (PF5u-T 3/4x1x3/4)	1/2" x 1" x 1/2" (PF5u-T 1/2x1x1/2)
1/2" x 3/8" x 3/8" (PF5u-T 1/2x3/8x3/8)	3/4" x 1/2" x 1/2" (PF5u-T 3/4x1/2x1/2)	1" x 3/4" x 3/4" (PF5u-T 1x3/4x3/4)	1" x 1/2" x 1/2" (PF5u-T 1x1/2x1/2)
1/2" x 1/2" x 3/8" (PF5u-T 1/2x1/2x3/8)	3/4" x 3/4" x 1/2" (PF5u-T 3/4x3/4x1/2)	1" x 1" x 3/4" (PF5u-T 1x1x3/4)	1" x 1" x 1/2" (PF5u-T 1x1x1/2)
1/2" x 3/8" x 1/2" (PF5u-T 1/2x3/8x1/2)	3/4" x 1/2" x 3/4" (PF5u-T 3/4x1/2x3/4)	1" x 3/4" x 1" (PF5u-T 1x3/4x1)	1" x 1/2" x 1" (PF5u-T 1x1/2x1)
3/4" x 1/2" x 3/8" (PF5u-T 3/4x1/2x3/8)	3/4" x 3/8" x 1/2" (PF5u-T 3/4x3/8x1/2)	1" x 3/4" x 1/2" (PF5u-T 1x3/4x1/2)	1" x 1/2" x 3/4" (PF5u-T 1x1/2x3/4)
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings¢ +++ [G]	PPSU	RIFENG	CSA B137.5
End Cap
3/8" (PF5u-D 3/8)	1/2" (PF5u-D 1/2)	3/4" (PF5u-D 3/4)	1" (PF5u-D 1)
Equal Elbow
3/8" (PF5u-L 3/8x3/8)	1/2" (PF5u-L 1/2x1/2)	3/4" (PF5u-L 3/4x3/4)	1" (PF5u-L 1x1)
Equal Straight
3/8" (PF5u-S 3/8x3/8)	1/2" (PF5u-S 1/2x1/2)	3/4" (PF5u-S 3/4x3/4)	1" (PF5u-S 1x1)
Equal Tee
3/8" (PF5u-T 3/8x3/8x3/8)	1/2" (PF5u-T 1/2x1/2x1/2)	3/4" (PF5u-T 3/4x3/4x3/4)	1" (PF5u-T 1x1x1)
Female Equal Elbow
3/8" x 3/8"F (PF5u-L 3/8x3/8F)	1/2" x 1/2"F (PF5u-L 1/2x1/2F)	3/4" x 3/4"F (PF5u-L 3/4x3/4F)	1" x 1"F (PF5u-L 1x1F)
Female Equal Straight
3/8" x 3/8"F (PF5u-S 3/8x3/8F)	1/2" x 1/2"F (PF5u-S 1/2x1/2F)	3/4" x 3/4"F (PF5u-S 3/4x3/4F)	1" x 1"F (PF5u-S 1x1F)
Female Equal Tee
3/8" x 3/8"F x 3/8" (PF5u-T 3/8x3/8Fx3/8)	1/2" x 1/2"F x 1/2" (PF5u-T 1/2x1/2Fx1/2)	3/4" x 3/4"F x 3/4" (PF5u-T 3/4x3/4Fx3/4)	1" x 1"F x 1" (PF5u-T 1x1Fx1)
Female Unequal Elbow
3/8" x 1/2"F (PF5u-L 3/8x1/2F)	1/2" x 3/4"F (PF5u-L 1/2x3/4F)	3/4" x 1"F (PF5u-L 3/4x1F)	1/2" x 1"F (PF5u-L 1/2x1F)
1/2" x 3/8"F (PF5u-L 1/2x3/8F)	3/4" x 1/2"F (PF5u-L 3/4x1/2F)	1" x 3/4"F (PF5u-L 1x3/4F)	1" x 1/2"F (PF5u-L 1x1/2F)
Female Unequal Straight
3/8" x 1/2"F (PF5u-S 3/8x1/2F)	1/2" x 3/4"F (PF5u-S 1/2x3/4F)	3/4" x 1"F (PF5u-S 3/4x1F)	1/2" x 1"F (PF5u-S 1/2x1F)
Female Unequal Tee
3/8" x 1/2"F x 3/8" (PF5u-T 3/8x1/2Fx3/8)	1/2" x 3/4"F x 1/2" (PF5u-T 1/2x3/4Fx1/2)	3/4" x 1"F x 3/4" (PF5u-T 3/4x1Fx3/4)	1/2" x 1"F x 1/2" (PF5u-T 1/2x1Fx1/2)
1/2" x 3/8"F x 3/8" (PF5u-T 1/2x3/8Fx3/8)	3/4" x 1/2"F x 1/2" (PF5u-T 3/4x1/2Fx1/2)	1" x 3/4"F x 3/4" (PF5u-T 1x3/4Fx3/4)	1" x 1/2"F x 1/2" (PF5u-T 1x1/2Fx1/2)
1/2" x 1/2"F x 3/8" (PF5u-T 1/2x1/2Fx3/8)	3/4" x 3/4"F x 1/2" (PF5u-T 3/4x3/4Fx1/2)	1" x 1"F x 3/4" (PF5u-T 1x1Fx3/4)	1" x 1"F x 1/2" (PF5u-T 1x1Fx1/2)
1/2" x 3/8"F x 1/2" (PF5u-T 1/2x3/8Fx1/2)	3/4" x 1/2"F x 3/4" (PF5u-T 3/4x1/2Fx3/4)	1" x 3/4"F x 1" (PF5u-T 1x3/4Fx1)	1" x 1/2"F x 1" (PF5u-T 1x1/2Fx1)
Male Equal Elbow
3/8" x 3/8"M (PF5u-L 3/8x3/8M)	1/2" x 1/2"M (PF5u-L 1/2x1/2M)	3/4" x 3/4"M (PF5u-L 3/4x3/4M)	1" x 1"M (PF5u-L 1x1M)
Male Equal Straight
3/8" x 3/8"M (PF5u-S 3/8x3/8M)	1/2" x 1/2"M (PF5u-S 1/2x1/2M)	3/4" x 3/4"M (PF5u-S 3/4x3/4M)	1" x 1"M (PF5u-S 1x1M)
Male Equal Tee
3/8" x 3/8"M x 3/8" (PF5u-T 3/8x3/8Mx3/8)	1/2" x 1/2"M x 1/2" (PF5u-T 1/2x1/2Mx1/2)	3/4" x 3/4"M x 3/4" (PF5u-T 3/4x3/4Mx3/4)	1" x 1"M x 1" (PF5u-T 1x1Mx1)
Male Unequal Elbow
3/8" x 1/2"M (PF5u-L 3/8x1/2M)	1/2" x 3/4"M (PF5u-L 1/2x3/4M)	3/4" x 1"M (PF5u-L 3/4x1M)	1/2" x 1"M (PF5u-L 1/2x1M)
1/2" x 3/8"M (PF5u-L 1/2x3/8M)	3/4" x 1/2"M (PF5u-L 3/4x1/2M)	1" x 3/4"M (PF5u-L 1x3/4M)	1" x 1/2"M (PF5u-L 1x1/2M)
Male Unequal Straight
3/8" x 1/2"M (PF5u-S 3/8x1/2M)	1/2" x 3/4"M (PF5u-S 1/2x3/4M)	3/4" x 1"M (PF5u-S 3/4x1M)	1/2" x 1"M (PF5u-S 1/2x1M)
1/2" x 3/8"M (PF5u-S 1/2x3/8M)	3/4" x 1/2"M (PF5u-S 3/4x1/2M)	1" x 3/4"M (PF5u-S 1x3/4M)	1" x 1/2"M (PF5u-S 1x1/2M)
Male Unequal Tee
3/8" x 1/2"M x 3/8" (PF5u-T 3/8x1/2Mx3/8)	1/2" x 3/4"M x 1/2" (PF5u-T 1/2x3/4Mx1/2)	3/4" x 1"M x 3/4" (PF5u-T 3/4x1Mx3/4)	1/2" x 1"M x 1/2" (PF5u-T 1/2x1Mx1/2)
1/2" x 3/8"M x 3/8" (PF5u-T 1/2x3/8Mx3/8)	3/4" x 1/2"M x 1/2" (PF5u-T 3/4x1/2Mx1/2)	1" x 3/4"M x 3/4" (PF5u-T 1x3/4Mx3/4)	1" x 1/2"M x 1/2" (PF5u-T 1x1/2Mx1/2)
1/2" x 1/2"M x 3/8" (PF5u-T 1/2x1/2Mx3/8)	3/4" x 3/4"M x 1/2" (PF5u-T 3/4x3/4Mx1/2)	1" x 1"M x 3/4" (PF5u-T 1x1Mx3/4)	1" x 1"M x 1/2" (PF5u-T 1x1Mx1/2)
1/2" x 3/8"M x 1/2" (PF5u-T 1/2x3/8Mx1/2)	3/4" x 1/2"M x 3/4" (PF5u-T 3/4x1/2Mx3/4)	1" x 3/4"M x 1" (PF5u-T 1x3/4Mx1)	1" x 1/2"M x 1" (PF5u-T 1x1/2Mx1)
Unequal Elbow
3/8" x 1/2" (PF5u-L 3/8x1/2)	1/2" x 3/4" (PF5u-L 1/2x3/4)	3/4" x 1" (PF5u-L 3/4x1)	1/2" x 1" (PF5u-L 1/2x1)
Unequal Straight
3/8" x 1/2" (PF5u-S 3/8x1/2)	1/2" x 3/4" (PF5u-S 1/2x3/4)	3/4" x 1" (PF5u-S 3/4x1)	1/2" x 1" (PF5u-S 1/2x1)
Unequal Tee
3/8" x 1/2" x 3/8" (PF5u-T 3/8x1/2x3/8)	1/2" x 3/4" x 1/2" (PF5u-T 1/2x3/4x1/2)	3/4" x 1" x 3/4" (PF5u-T 3/4x1x3/4)	1/2" x 1" x 1/2" (PF5u-T 1/2x1x1/2)
1/2" x 3/8" x 3/8" (PF5u-T 1/2x3/8x3/8)	3/4" x 1/2" x 1/2" (PF5u-T 3/4x1/2x1/2)	1" x 3/4" x 3/4" (PF5u-T 1x3/4x3/4)	1" x 1/2" x 1/2" (PF5u-T 1x1/2x1/2)
1/2" x 1/2" x 3/8" (PF5u-T 1/2x1/2x3/8)	3/4" x 3/4" x 1/2" (PF5u-T 3/4x3/4x1/2)	1" x 1" x 3/4" (PF5u-T 1x1x3/4)	1" x 1" x 1/2" (PF5u-T 1x1x1/2)
1/2" x 3/8" x 1/2" (PF5u-T 1/2x3/8x1/2)	3/4" x 1/2" x 3/4" (PF5u-T 3/4x1/2x3/4)	1" x 3/4" x 1" (PF5u-T 1x3/4x1)	1" x 1/2" x 1" (PF5u-T 1x1/2x1)
3/4" x 1/2" x 3/8" (PF5u-T 3/4x1/2x3/8)	3/4" x 3/8" x 1/2" (PF5u-T 3/4x3/8x1/2)	1" x 3/4" x 1/2" (PF5u-T 1x3/4x1/2)	1" x 1/2" x 3/4" (PF5u-T 1x1/2x3/4)
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Manifolds+++ [8] [G]	PPSU	RIFENG	ASTM F1960
Branch Multi-port Tee
3/4" (FS9(PF6u)-3/4-Dx1/2xn)	1" (FS9(PF6u)-1-Dx1/2xn)
Branch Opposing Multi-port Tee
3/4" (FS9(PF6u)-3/4-Dx1/2xn)	1" (FS9(PF6u)-1-Dx1/2xn)
Flow-through Multi-port Tee
3/4" x 3/4" (FS9(PF6u)-3/4-3/4 x1/2xn)	1" x 1" (FS9(PF6u)-1-1 x1/2xn)	1" x 3/4" (FS9(PF6u)-1-3/4 x1/2xn)
Flow-through Opposing Multi-port Tee
3/4" x 3/4" (FS9(PF6u)-3/4-3/4x1/2xn)	1" x 1" (FS9(PF6u)-1-1x1/2xn)
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [8] n - Number of ports. n - 4 - 8 for Branch Tees and n - 3 - 8 for Flow-through Tees. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Manifolds¢ +++ [8] [G]	PPSU	RIFENG	ASTM F2159
Branch Multi-port Tee
3/4" (FS9(PF5u)-3/4-Dx1/2xn)	1" (FS9(PF6u)-1-Dx1/2xn)
Branch Opposing Multi-port Tee
3/4" (FS9(PF5u)-3/4-Dx1/2xn)	1" (FS9(PF5u)-1-Dx1/2xn)
Flow-through Multi-port Tee
3/4" x 3/4" (FS9(PF5u)-3/4-3/4 x1/2xn)	1" x 1" (FS9(PF5u)-1-1 x1/2xn)	1" x 3/4" (FS9(PF5u)-1-3/4 x1/2xn)
Flow-through Opposing Multi-port Tee
3/4" x 3/4" (FS9(PF5u)-3/4-3/4x1/2xn)	1" x 1" (FS9(PF5u)-1-1x1/2xn)
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [8] n - Number of ports. n - 4 - 8 for Branch Tees and n - 3 - 8 for Flow-through Tees. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Manifolds+++ [8] [G]	PPSU	RIFENG	CSA B137.5
Branch Multi-port Tee
3/4" (FS9(PF6u)-3/4-Dx1/2xn)	1" (FS9(PF6u)-1-Dx1/2xn)
Branch Opposing Multi-port Tee
3/4" (FS9(PF6u)-3/4-Dx1/2xn)	1" (FS9(PF6u)-1-Dx1/2xn)
Flow-through Multi-port Tee
3/4" x 3/4" (FS9(PF6u)-3/4-3/4 x1/2xn)	1" x 1" (FS9(PF6u)-1-1 x1/2xn)	1" x 3/4" (FS9(PF6u)-1-3/4 x1/2xn)
Flow-through Opposing Multi-port Tee
3/4" x 3/4" (FS9(PF6u)-3/4-3/4x1/2xn)	1" x 1" (FS9(PF6u)-1-1x1/2xn)
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [8] n - Number of ports. n - 4 - 8 for Branch Tees and n - 3 - 8 for Flow-through Tees. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Manifolds¢ +++ [8] [G]	PPSU	RIFENG	CSA B137.5
Branch Multi-port Tee
3/4" (FS9(PF5u)-3/4-Dx1/2xn)	1" (FS9(PF6u)-1-Dx1/2xn)
Branch Opposing Multi-port Tee
3/4" (FS9(PF5u)-3/4-Dx1/2xn)	1" (FS9(PF5u)-1-Dx1/2xn)
Flow-through Multi-port Tee
3/4" x 3/4" (FS9(PF5u)-3/4-3/4 x1/2xn)	1" x 1" (FS9(PF5u)-1-1 x1/2xn)	1" x 3/4" (FS9(PF5u)-1-3/4 x1/2xn)
Flow-through Opposing Multi-port Tee
3/4" x 3/4" (FS9(PF5u)-3/4-3/4x1/2xn)	1" x 1" (FS9(PF5u)-1-1x1/2xn)
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [8] n - Number of ports. n - 4 - 8 for Branch Tees and n - 3 - 8 for Flow-through Tees. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
PEX Ball Valve (PF5-Q)¢ § +++ [1] [G]	MLTPL	RIFENG	ASME A112.4.14/CSA B125.14
1/2" - 1 1/4"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Ball Valves rated at 125 PSI and 65C. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
PEX Ball Valve (PF5m-Q)¢ § +++ [1] [2] [G]	MLTPL	RIFENG	ASME A112.4.14/CSA B125.14
1/2" - 1 1/4"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Ball Valves rated at 125 PSI and 65C. [2] For trade names, the use of "m" in trade name indicates use of C69300 alloy. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Press Fittings (F5m) § +++ [2]*	MLTPL	RIFENG	ASTM F1807
3/8" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] For trade names, the use of "m" in trade name indicates use of C69300 alloy.
Press Fittings (F5-G) § +++*	MLTPL	RIFENG	ASTM F1807
3/8" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Press Fittings (F5-G) § +++*	MLTPL	RIFENG	ASTM F877
3/8" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Press Fittings (F5m) ¢ § +++ [2]*	MLTPL	RIFENG	CSA B137.5
3/8" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] For trade names, the use of "m" in trade name indicates use of C69300 alloy.
Press Fittings (F5-G) ¢ § +++*	MLTPL	RIFENG	CSA B137.5
3/8" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Press Fittings (F5-G) @ § +++ [G]*	MLTPL	R, Rifeng	ASTM F1281
1/2" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ Fittings tested as a system using Rifeng PEX / AL / PEX tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Press Fittings (F5-G) @ ¢ § +++ [G]*	MLTPL	R, Rifeng	CSA B137.10
1/2" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ Fittings tested as a system using Rifeng PEX / AL / PEX tubing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Press Fittings (PF15)% § +++ [G]	MLTPL	RIFENG	ASTM F877
1/8" - 2 1/2"
% Product Listed for use with RIFENG PEX tubing only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Press Fittings (PF15II)% § +++ [G]	MLTPL	RIFENG	ASTM F877
1/8" - 2 1/2"
% Product Listed for use with RIFENG PEX tubing only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Press Fittings (PF15)% ¢ § +++ [G]	MLTPL	RIFENG	CSA B137.5
1/8" - 2 1/2"
% Product Listed for use with RIFENG PEX tubing only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Press Fittings (PF15II)% ¢ § +++ [G]	MLTPL	RIFENG	CSA B137.5
1/8" - 2 1/2"
% Product Listed for use with RIFENG PEX tubing only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
RIFENG PF15% § +++ [4]	Brass	RIFENG	ASTM F877
1/8" - 2 1/2"
% Product Listed for use with RIFENG PEX tubing only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [4] This product represents the following configurations: Equal Straight Union, PF15c-S, 1/8" - 2 1/2" Equal Elbow, PF15c-L, 1/8" - 2 1/2" Equal Straight Union PF15c(II)-S, 1/8" - 2-1/2" Equal Elbow, PF15c(II)-L, 1/8" - 2-1/2"
RIFENG PF15m% § +++ [2] [4]	Brass	RIFENG	ASTM F877
1/8" - 2 1/2"
% Product Listed for use with RIFENG PEX tubing only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] For trade names, the use of "m" in trade name indicates use of C69300 alloy. [4] This product represents the following configurations: Equal Straight Union, PF15c-S, 1/8" - 2 1/2" Equal Elbow, PF15c-L, 1/8" - 2 1/2" Equal Straight Union PF15c(II)-S, 1/8" - 2-1/2" Equal Elbow, PF15c(II)-L, 1/8" - 2-1/2"
RIFENG PF15m(II)% § +++ [2] [4]	Brass	RIFENG	ASTM F877
1/8" - 2 1/2"
% Product Listed for use with RIFENG PEX tubing only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] For trade names, the use of "m" in trade name indicates use of C69300 alloy. [4] This product represents the following configurations: Equal Straight Union, PF15c-S, 1/8" - 2 1/2" Equal Elbow, PF15c-L, 1/8" - 2 1/2" Equal Straight Union PF15c(II)-S, 1/8" - 2-1/2" Equal Elbow, PF15c(II)-L, 1/8" - 2-1/2"
RIFENG PF15(II)% § +++ [4]	Brass	RIFENG	ASTM F877
1/8" - 2 1/2"
% Product Listed for use with RIFENG PEX tubing only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [4] This product represents the following configurations: Equal Straight Union, PF15c-S, 1/8" - 2 1/2" Equal Elbow, PF15c-L, 1/8" - 2 1/2" Equal Straight Union PF15c(II)-S, 1/8" - 2-1/2" Equal Elbow, PF15c(II)-L, 1/8" - 2-1/2"
RIFENG PF15% ¢ § +++ [4]	Brass	RIFENG	CSA B137.5
1/8" - 2 1/2"
% Product Listed for use with RIFENG PEX tubing only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [4] This product represents the following configurations: Equal Straight Union, PF15c-S, 1/8" - 2 1/2" Equal Elbow, PF15c-L, 1/8" - 2 1/2" Equal Straight Union PF15c(II)-S, 1/8" - 2-1/2" Equal Elbow, PF15c(II)-L, 1/8" - 2-1/2"
RIFENG PF15m% ¢ § +++ [2] [4]	Brass	RIFENG	CSA B137.5
1/8" - 2 1/2"
% Product Listed for use with RIFENG PEX tubing only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] For trade names, the use of "m" in trade name indicates use of C69300 alloy. [4] This product represents the following configurations: Equal Straight Union, PF15c-S, 1/8" - 2 1/2" Equal Elbow, PF15c-L, 1/8" - 2 1/2" Equal Straight Union PF15c(II)-S, 1/8" - 2-1/2" Equal Elbow, PF15c(II)-L, 1/8" - 2-1/2"
RIFENG PF15m(II)% ¢ § +++ [2] [4]	Brass	RIFENG	CSA B137.5
1/8" - 2 1/2"
% Product Listed for use with RIFENG PEX tubing only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] For trade names, the use of "m" in trade name indicates use of C69300 alloy. [4] This product represents the following configurations: Equal Straight Union, PF15c-S, 1/8" - 2 1/2" Equal Elbow, PF15c-L, 1/8" - 2 1/2" Equal Straight Union PF15c(II)-S, 1/8" - 2-1/2" Equal Elbow, PF15c(II)-L, 1/8" - 2-1/2"
RIFENG PF15(II)% ¢ § +++ [4]	Brass	RIFENG	CSA B137.5
1/8" - 2 1/2"
% Product Listed for use with RIFENG PEX tubing only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [4] This product represents the following configurations: Equal Straight Union, PF15c-S, 1/8" - 2 1/2" Equal Elbow, PF15c-L, 1/8" - 2 1/2" Equal Straight Union PF15c(II)-S, 1/8" - 2-1/2" Equal Elbow, PF15c(II)-L, 1/8" - 2-1/2"
Tubing$ ^ ¢ § +++ [5] [G]*	PEX	Rifeng	CSA B137.5
>= 1/8" SDR 9
$ Certified for natural, without oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [5] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, ASTM F2098. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing# & § +++ [G]*	MLTPL	Rifeng	ASTM F1281
1/2" - 1"
# Certified for black, blue, natural, orange, red, and white. & Meets the chlorine resistance requirements of ASTM F1281 when tested in accordance with ASTM F2023. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing# ¢ § +++ [G]*	MLTPL	Rifeng	CSA B137.10
1/2" - 1"
# Certified for black, blue, natural, orange, red, and white. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing! ^ § +++ [G]*	PEX 5006	RIFENG	CSA B137.5
1/8" - 6" SDR 9
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing! ^ § +++ [G]*	PEX 5106	RIFENG	ASTM F876/F877
1/8" - 6" SDR 9
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing! ^ § +++ [G]*	PEX 5106	RIFENG	AWWA C904
1/2" - 1 1/2" SDR 9
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing! ^ § +++ [G]*	PEX 5106	RIFENG	CSA B137.5
1/8" - 6" SDR 9
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing! ^ § +++ [G]*	PEX 5206	RIFENG	ASTM F876/F877
1/8" - 6" SDR 9
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing! ^ § +++ [G]*	PEX 5206	RIFENG	AWWA C904
1/2" - 1 1/2" SDR 9
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing! ^ § +++ [G]*	PEX 5206	RIFENG	CSA B137.5
1/8" - 6" SDR 9
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing ^ ~ ¢ +++ [6] [G]*	PEX 5106	RIFENG PEXa	ASTM F876/F877
1/8" - 3"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [6] Certified for the following: 1. Monowall pipe [PEX 5106]: 1/8" - 3" 2. 2-layer skinned pipe for Red, Blue, White [PEX 5106]: 1/2", 5/8", 3/4", 1" sizes only. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing ^ ~ ¢ +++ [G] [12]*	PEX 5206	RIFENG PEXa	ASTM F876/F877
1/2", 5/8", 3/4", 1"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [12] PEX 5206 Certified for Red, Blue ,White 2-layer for 1/2", 5/8", 3/4", 1" sizes only.
Tubing ^ ~ ¢ +++ [G] [13]*	PEX 5306	RIFENG PEXa	ASTM F876/F877
1/2", 5/8", 3/4", 1"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [13] PEX 5306 Certified for Red, Blue ,White 2-layer for 1/2", 5/8", 3/4", 1" sizes only.
Tubing& ^ ~ ¢ +++ [5] [G]*	PEX 5006	RIFENG PEXa	CSA B137.5
1/8" - 3"
& Meets the chlorine resistance requirements of ASTM F1281 when tested in accordance with ASTM F2023. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [5] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, ASTM F2098. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing ^ ¢ +++ [5] [6] [G]*	PEX 5106	RIFENG PEXa	CSA B137.5
1/8" - 3"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [5] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, ASTM F2098. [6] Certified for the following: 1. Monowall pipe [PEX 5106]: 1/8" - 3" 2. 2-layer skinned pipe for Red, Blue, White [PEX 5106]: 1/2", 5/8", 3/4", 1" sizes only. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing ^ ¢ +++ [5] [G] [12]*	PEX 5206	RIFENG PEXa	CSA B137.5
1/2", 5/8", 3/4", 1"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [5] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, ASTM F2098. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [12] PEX 5206 Certified for Red, Blue ,White 2-layer for 1/2", 5/8", 3/4", 1" sizes only.
Tubing ^ ¢ +++ [5] [G] [13]*	PEX 5306	RIFENG PEXa	CSA B137.5
1/2", 5/8", 3/4", 1"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [5] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, ASTM F2098. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [13] PEX 5306 Certified for Red, Blue ,White 2-layer for 1/2", 5/8", 3/4", 1" sizes only.
Tubing ^ ¢ +++ [9] [G]*	PEX 5106	RIFENG PEX	ASTM F876/F877
3/8" - 1"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [9] Certified for the following: 2-layer skinned (Natural PEX – White PE) pipe [PEX 5106]: 3/8", 1/2", 5/8",3/4" & 1" 2-layer skinned (Natural PEX – Red, White or Blue PE) pipe [PEX 5306]: 3/8", 1/2", 5/8",3/4" & 1" [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing ^ ¢ +++ [G] [11]*	PEX 5106	RIFENG PEX	ASTM F876/F877
>= 1/8"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [11] Certified for red and white PEX 5106 monowall pipe.
Tubing ^ ¢ +++ [9] [G]*	PEX 5306	RIFENG PEX	ASTM F876/F877
3/8" - 1"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [9] Certified for the following: 2-layer skinned (Natural PEX – White PE) pipe [PEX 5106]: 3/8", 1/2", 5/8",3/4" & 1" 2-layer skinned (Natural PEX – Red, White or Blue PE) pipe [PEX 5306]: 3/8", 1/2", 5/8",3/4" & 1" [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing& ^ ~ ¢ +++ [9] [G]*	PEX 5106	RIFENG PEX	CSA B137.5
3/8" - 1"
& Meets the chlorine resistance requirements of ASTM F1281 when tested in accordance with ASTM F2023. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [9] Certified for the following: 2-layer skinned (Natural PEX – White PE) pipe [PEX 5106]: 3/8", 1/2", 5/8",3/4" & 1" 2-layer skinned (Natural PEX – Red, White or Blue PE) pipe [PEX 5306]: 3/8", 1/2", 5/8",3/4" & 1" [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing& ^ ~ ¢ +++ [G] [11]*	PEX 5106	RIFENG PEX	CSA B137.5
>= 1/8"
& Meets the chlorine resistance requirements of ASTM F1281 when tested in accordance with ASTM F2023. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [11] Certified for red and white PEX 5106 monowall pipe.
Tubing& ^ ¢ +++ [9] [G] [10]*	PEX 5306	RIFENG PEX	CSA B137.5
3/8" - 1"
& Meets the chlorine resistance requirements of ASTM F1281 when tested in accordance with ASTM F2023. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [9] Certified for the following: 2-layer skinned (Natural PEX – White PE) pipe [PEX 5106]: 3/8", 1/2", 5/8",3/4" & 1" 2-layer skinned (Natural PEX – Red, White or Blue PE) pipe [PEX 5306]: 3/8", 1/2", 5/8",3/4" & 1" [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [10] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159.

Radiant Floor Heating

Product Type	Material Type	Trade Name	Product Standard
Compression Fittings (F1) @ §*	Brass C37700	R	ASTM F1281
1/2" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ Fittings tested as a system using Rifeng PEX/AL/PEX tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Compression Fittings (F1) @ ¢ §*	Brass C37700	R	CSA B137.10
1/2" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ Fittings tested as a system using Rifeng PEX/AL/PEX tubing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Compression Fittings (F1) @ §*	DZR Brass	R	ASTM F1281
1/2" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ Fittings tested as a system using Rifeng PEX/AL/PEX tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Compression Fittings (F1) @ ¢*	DZR Brass	R	CSA B137.10
1/2" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ Fittings tested as a system using Rifeng PEX/AL/PEX tubing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Compression Fittings (F1-G) @ §*	MLTPL	R	ASTM F1281
1/2" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ Fittings tested as a system using Rifeng PEX/AL/PEX tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Compression Fittings (F1-G) @ ¢ §*	MLTPL	R	CSA B137.10
1/2" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ Fittings tested as a system using Rifeng PEX/AL/PEX tubing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Crimp Fittings (PF5) §*	Brass C37700	R	ASTM F877
3/8" - 2-1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Crimp Fittings (PF5) §*	Brass C37700	R	ASTM F1807
3/8" - 2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Crimp Fittings (PF5) ¢ §*	Brass C37700	R	CSA B137.5
3/8" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Crimp Fittings (PF5) §*	DZR Brass	R	ASTM F877
3/8" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Crimp Fittings (PF5) ¢*	DZR Brass	R	CSA B137.5
3/8" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Crimp Fittings (PF5-G) ¢ §*	MLTPL	R	CSA B137.5
3/8" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Crimp Fittings (PF5-G) §*	MLTPL	R	ASTM F1807
3/8" - 2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Fittings§ [1] [2]	MLTPL	R	ASTM F877
Stainless Steel Manifolds
FN16-1F-3/4*n
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Main inlet/outlet size: 1" Sub inlet/outlet size: 3/4" [2] n is the quantity of subway
Fittings¢ § [1] [2]	MLTPL	R	CSA B137.5
Brass Manifolds
FN9-1F-3/4*n
Nickel - plated brass Manifolds
FN9-1F-3/4*n (Ni)
Stainless Steel Manifolds
FN16-1F-3/4*n
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Main inlet/outlet size: 1" Sub inlet/outlet size: 3/4" [2] n is the quantity of subway
Fittings§ [1] [2]	MLTPL	R	ASTM F1807
Brass Manifolds
FN9-1F-3/4*n
Nickel - plated brass Manifolds
FN9-1F-3/4*n (Ni)
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Main inlet/outlet size: 1" Sub inlet/outlet size: 3/4" [2] n is the quantity of subway
Fittings[7]	PEX	RIFENG	ASTM F1960
RIFENG PEX Ring with Stop
3/8" - 2"
[7] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5. This is a non wetted product.
Fittings[7]	PEX	RIFENG	CSA B137.5
RIFENG PEX Ring with Stop
3/8" - 2"
[7] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5. This is a non wetted product.
Press Fittings (F5) @ §*	Brass C37700	R	ASTM F1281
1/2" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ Fittings tested as a system using Rifeng PEX/AL/PEX tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Press Fittings (F5)	Brass C37700	R	CSA B137.10
1/2" - 2 1/2"
Press Fittings (F5) @ §*	DZR Brass	R	ASTM F1281
1/2" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ Fittings tested as a system using Rifeng PEX/AL/PEX tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Press Fittings (F5) @ ¢*	DZR Brass	R	CSA B137.10
1/2" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ Fittings tested as a system using Rifeng PEX/AL/PEX tubing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Press Fittings (F5-G) @ ¢ §*	MLTPL	R	CSA B137.10
1/2" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ Fittings tested as a system using Rifeng PEX/AL/PEX tubing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Press Fittings (F5-G) @ §*	MLTPL	R	ASTM F1281
1/2" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ Fittings tested as a system using Rifeng PEX/AL/PEX tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Compression Fittings (F1) @ §*	Brass C37700	Rifeng	ASTM F1281
1/2" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ Fittings tested as a system using Rifeng PEX/AL/PEX tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Compression Fittings (F1) @ ¢ §*	Brass C37700	Rifeng	CSA B137.10
1/2" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ Fittings tested as a system using Rifeng PEX/AL/PEX tubing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Crimp Fittings (PF5-G) §*	MLTPL	Rifeng	ASTM F1807
3/8" - 2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Compression Fittings (F1) @ §*	DZR Brass	Rifeng	ASTM F1281
1/2" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ Fittings tested as a system using Rifeng PEX/AL/PEX tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Compression Fittings (F1) @ ¢*	DZR Brass	Rifeng	CSA B137.10
1/2" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ Fittings tested as a system using Rifeng PEX/AL/PEX tubing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Compression Fittings (F1-G) @ §*	MLTPL	Rifeng	ASTM F1281
1/2" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ Fittings tested as a system using Rifeng PEX/AL/PEX tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Compression Fittings (F1-G) @ ¢ §*	MLTPL	Rifeng	CSA B137.10
1/2" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ Fittings tested as a system using Rifeng PEX/AL/PEX tubing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Crimp Fittings (PF5) §*	Brass C37700	Rifeng	ASTM F877
3/8" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Crimp Fittings (PF5) §*	Brass C37700	Rifeng	ASTM F1807
3/8" - 2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Crimp Fittings (PF5) ¢ §*	Brass C37700	Rifeng	CSA B137.5
3/8" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Crimp Fittings (PF5) §*	DZR Brass	Rifeng	ASTM F877
3/8" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Crimp Fittings (PF5) ¢*	DZR Brass	Rifeng	CSA B137.5
3/8" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Crimp Fittings (PF5-G) ¢ §*	MLTPL	Rifeng	CSA B137.5
3/8" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Fittings§ [1] [2]	MLTPL	Rifeng	ASTM F877
Stainless Steel Manifolds
FN16-1F-3/4*n
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Main inlet/outlet size: 1" Sub inlet/outlet size: 3/4" [2] n is the quantity of subway
Fittings¢ § [1] [2]	MLTPL	Rifeng	CSA B137.5
Brass Manifolds
FN9-1F-3/4*n
Nickel - plated brass Manifolds
FN9-1F-3/4*n (Ni)
Stainless Steel Manifolds
FN16-1F-3/4*n
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Main inlet/outlet size: 1" Sub inlet/outlet size: 3/4" [2] n is the quantity of subway
Fittings§ [1] [2]	MLTPL	Rifeng	ASTM F1807
Brass Manifolds
FN9-1F-3/4*n
Nickel - plated brass Manifolds
FN9-1F-3/4*n (Ni)
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Main inlet/outlet size: 1" Sub inlet/outlet size: 3/4" [2] n is the quantity of subway
Press Fittings (F5) @ §*	Brass C37700	Rifeng	ASTM F1281
1/2" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ Fittings tested as a system using Rifeng PEX/AL/PEX tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Press Fittings (F5) @ ¢ §*	Brass C37700	Rifeng	CSA B137.10
1/2" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ Fittings tested as a system using Rifeng PEX/AL/PEX tubing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Press Fittings (F5) @ §*	DZR Brass	Rifeng	ASTM F1281
1/2" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ Fittings tested as a system using Rifeng PEX/AL/PEX tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Press Fittings (F5) @ ¢*	DZR Brass	Rifeng	CSA B137.10
1/2" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ Fittings tested as a system using Rifeng PEX/AL/PEX tubing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Press Fittings (F5-G) @ §*	MLTPL	Rifeng	ASTM F1281
1/2" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ Fittings tested as a system using Rifeng PEX/AL/PEX tubing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Press Fittings (F5-G) @ ¢ §*	MLTPL	Rifeng	CSA B137.10
1/2" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ Fittings tested as a system using Rifeng PEX/AL/PEX tubing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
RIFENG PF15% § [3]	Brass	RIFENG	ASTM F877
1/8" - 2 1/2"
% Product Listed for use with RIFENG PEX tubing only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [3] This product represents the following configurations: Equal Straight Union, PF15c-S, 1/8" - 2 1/2" Equal Elbow, PF15c-L, 1/8" - 2 1/2" Equal Straight Union PF15c(II)-S, 1/8" - 2-1/2" Equal Elbow, PF15c(II)-L, 1/8" - 2-1/2"
RIFENG PF15m% § [3] [4]	Brass	RIFENG	ASTM F877
1/8" - 2 1/2"
% Product Listed for use with RIFENG PEX tubing only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [3] This product represents the following configurations: Equal Straight Union, PF15c-S, 1/8" - 2 1/2" Equal Elbow, PF15c-L, 1/8" - 2 1/2" Equal Straight Union PF15c(II)-S, 1/8" - 2-1/2" Equal Elbow, PF15c(II)-L, 1/8" - 2-1/2" [4] For trade names, the use of "m" in trade name indicates use of C69300 alloy.
RIFENG PF15m(II)% § [3] [4]	Brass	RIFENG	ASTM F877
1/8" - 2 1/2"
% Product Listed for use with RIFENG PEX tubing only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [3] This product represents the following configurations: Equal Straight Union, PF15c-S, 1/8" - 2 1/2" Equal Elbow, PF15c-L, 1/8" - 2 1/2" Equal Straight Union PF15c(II)-S, 1/8" - 2-1/2" Equal Elbow, PF15c(II)-L, 1/8" - 2-1/2" [4] For trade names, the use of "m" in trade name indicates use of C69300 alloy.
RIFENG PF15(II)% § [3]	Brass	RIFENG	ASTM F877
1/8" - 2 1/2"
% Product Listed for use with RIFENG PEX tubing only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [3] This product represents the following configurations: Equal Straight Union, PF15c-S, 1/8" - 2 1/2" Equal Elbow, PF15c-L, 1/8" - 2 1/2" Equal Straight Union PF15c(II)-S, 1/8" - 2-1/2" Equal Elbow, PF15c(II)-L, 1/8" - 2-1/2"
RIFENG PF15% ¢ § [3]	Brass	RIFENG	CSA B137.5
1/8" - 2 1/2"
% Product Listed for use with RIFENG PEX tubing only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [3] This product represents the following configurations: Equal Straight Union, PF15c-S, 1/8" - 2 1/2" Equal Elbow, PF15c-L, 1/8" - 2 1/2" Equal Straight Union PF15c(II)-S, 1/8" - 2-1/2" Equal Elbow, PF15c(II)-L, 1/8" - 2-1/2"
RIFENG PF15m% ¢ § [3] [4]	Brass	RIFENG	CSA B137.5
1/8" - 2 1/2"
% Product Listed for use with RIFENG PEX tubing only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [3] This product represents the following configurations: Equal Straight Union, PF15c-S, 1/8" - 2 1/2" Equal Elbow, PF15c-L, 1/8" - 2 1/2" Equal Straight Union PF15c(II)-S, 1/8" - 2-1/2" Equal Elbow, PF15c(II)-L, 1/8" - 2-1/2" [4] For trade names, the use of "m" in trade name indicates use of C69300 alloy.
RIFENG PF15m(II)% ¢ § [3] [4]	Brass	RIFENG	CSA B137.5
1/8" - 2 1/2"
% Product Listed for use with RIFENG PEX tubing only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [3] This product represents the following configurations: Equal Straight Union, PF15c-S, 1/8" - 2 1/2" Equal Elbow, PF15c-L, 1/8" - 2 1/2" Equal Straight Union PF15c(II)-S, 1/8" - 2-1/2" Equal Elbow, PF15c(II)-L, 1/8" - 2-1/2" [4] For trade names, the use of "m" in trade name indicates use of C69300 alloy.
RIFENG PF15(II)% ¢ § [3]	Brass	RIFENG	CSA B137.5
1/8" - 2 1/2"
% Product Listed for use with RIFENG PEX tubing only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [3] This product represents the following configurations: Equal Straight Union, PF15c-S, 1/8" - 2 1/2" Equal Elbow, PF15c-L, 1/8" - 2 1/2" Equal Straight Union PF15c(II)-S, 1/8" - 2-1/2" Equal Elbow, PF15c(II)-L, 1/8" - 2-1/2"
Compression Fittings (F1m) § [4]*	MLTPL	RIFENG	ASTM F1807
3/8" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [4] For trade names, the use of "m" in trade name indicates use of C69300 alloy.
Compression Fittings (F1-G) §*	MLTPL	RIFENG	ASTM F1807
3/8" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Compression Fittings (F1m) § [4]*	MLTPL	RIFENG	ASTM F877
3/8" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [4] For trade names, the use of "m" in trade name indicates use of C69300 alloy.
Compression Fittings (F1-G) §*	MLTPL	RIFENG	ASTM F877
3/8" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Compression Fittings (F1m) ¢ § [4]*	MLTPL	RIFENG	CSA B137.5
3/8" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [4] For trade names, the use of "m" in trade name indicates use of C69300 alloy.
Compression Fittings (F1-G) ¢ §*	MLTPL	RIFENG	CSA B137.5
3/8" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Crimp Fittings (PF5m) § [4]*	MLTPL	RIFENG	ASTM F1807
3/8" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [4] For trade names, the use of "m" in trade name indicates use of C69300 alloy.
Crimp Fittings (PF5-G) §*	MLTPL	RIFENG	ASTM F1807
3/8" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Crimp Fittings (PF5m) § [4]*	MLTPL	RIFENG	ASTM F877
3/8" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [4] For trade names, the use of "m" in trade name indicates use of C69300 alloy.
Crimp Fittings (PF5-G) §*	MLTPL	RIFENG	ASTM F877
3/8" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Crimp Fittings (PF5m) ¢ § [4]*	MLTPL	RIFENG	CSA B137.5
3/8" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [4] For trade names, the use of "m" in trade name indicates use of C69300 alloy.
Crimp Fittings (PF5-G) ¢ §*	MLTPL	RIFENG	CSA B137.5
3/8" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Press Fittings (F5m) § [4]*	MLTPL	RIFENG	ASTM F1807
3/8" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [4] For trade names, the use of "m" in trade name indicates use of C69300 alloy.
Press Fittings (F5-G) §*	MLTPL	RIFENG	ASTM F1807
3/8" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Press Fittings (PF15)% §	MLTPL	RIFENG	ASTM F877
1/8" - 2 1/2"
% Product Listed for use with RIFENG PEX tubing only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Press Fittings (F5m) § [4]*	MLTPL	RIFENG	ASTM F877
3/8" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [4] For trade names, the use of "m" in trade name indicates use of C69300 alloy.
Press Fittings (F5-G) §*	MLTPL	RIFENG	ASTM F877
3/8" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Press Fittings (PF15II)% §	MLTPL	RIFENG	ASTM F877
% Product Listed for use with RIFENG PEX tubing only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Press Fittings (F5m) ¢ § [4]*	MLTPL	RIFENG	CSA B137.5
3/8" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [4] For trade names, the use of "m" in trade name indicates use of C69300 alloy.
Press Fittings (F5-G) ¢ §*	MLTPL	RIFENG	CSA B137.5
3/8" - 2 1/2"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Press Fittings (PF15)% ¢ §	MLTPL	RIFENG	CSA B137.5
1/8" - 2 1/2"
% Product Listed for use with RIFENG PEX tubing only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Press Fittings (PF15II)% ¢	MLTPL	RIFENG	CSA B137.5
% Product Listed for use with RIFENG PEX tubing only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Tubing$ ¢ § [5]*	PEX	Rifeng	CSA B137.5
>= 1/8" SDR 9
$ Certified for natural, orange, red, and white with oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [5] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, ASTM F2080, ASTM F2098.
Tubing$ §*	PEX 5006	Rifeng	ASTM F876/F877
>= 1/8" SDR 9
$ Certified for natural, orange, red, and white with oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Tubing# §*	MLTPL	Rifeng	ASTM F1281
1/2" - 1"
# Certified for black, blue, natural, orange, red, and white. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Tubing# ¢ §*	MLTPL	Rifeng	CSA B137.10
1/2" - 1"
# Certified for black, blue, natural, orange, red, and white. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Tubing! ^ §*	PEX 5106	RIFENG	ASTM F876/F877
1/8" - 6" SDR 9
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Tubing! ^ §*	PEX 5106	RIFENG	AWWA C904
1/2" - 1 1/2" SDR 9
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Tubing! ^ §*	PEX 5106	RIFENG	CSA B137.5
1/8" - 6" SDR 9
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Tubing! ^ §*	PEX 5206	Rifeng	ASTM F876/F877
1/8" - 6" SDR 9
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Tubing! ^ §*	PEX 5206	Rifeng	AWWA C904
1/2" - 1 1/2" SDR 9
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Tubing! ^ §*	PEX 5206	Rifeng	CSA B137.5
1/8" - 6" SDR 9
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Tubing ^ ~ ¢ +++ [G]*	PEX 5006	RIFENG PEXa	ASTM F876/F877
1/8" - 3"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, white, blue, orange, natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing ^ ¢ +++ [6] [G]*	PEX 5106	RIFENG PEXa	ASTM F876/F877
1/8" - 3"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [6] Certified for the following: 1. Monowall pipe [PEX 5006/PEX 5106]: 1/8"- 3" 2. 2-layer skinned pipe for Red, Blue, White [PEX 5006/PEX 5106]: 1/2", 5/8", 3/4", 1" sizes only 3. 3-Layer barrier pipe [PEX 5006/PEX 5106]: 1/2", 5/8", 3/4", 1" sizes only [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing ^ ¢ +++ [G] [12]*	PEX 5206	RIFENG PEXa	ASTM F876/F877
1/2", 5/8", 3/4", 1"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [12] PEX 5206 Certified for Red, Blue, White 2-layer for 1/2", 5/8", 3/4", 1" sizes only.
Tubing ^ ¢ +++ [G] [13]*	PEX 5306	RIFENG PEXa	ASTM F876/F877
1/2", 5/8", 3/4", 1"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [13] PEX 5306 Certified for Red, Blue ,White 2-layer for 1/2", 5/8", 3/4", 1" sizes only.
Tubing ^ ~ ¢ +++ [5] [G]*	PEX 5006	RIFENG PEXa	CSA B137.5
1/8" - 3"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, white, blue, orange, natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [5] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, ASTM F2080, ASTM F2098. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing ^ ¢ +++ [6] [G] [14]*	PEX 5106	RIFENG PEXa	CSA B137.5
1/8" - 3"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [6] Certified for the following: 1. Monowall pipe [PEX 5006/PEX 5106]: 1/8"- 3" 2. 2-layer skinned pipe for Red, Blue, White [PEX 5006/PEX 5106]: 1/2", 5/8", 3/4", 1" sizes only 3. 3-Layer barrier pipe [PEX 5006/PEX 5106]: 1/2", 5/8", 3/4", 1" sizes only [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [14] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, ASTM F2098.
Tubing ^ ¢ +++ [G] [12] [14]*	PEX 5206	RIFENG PEXa	CSA B137.5
1/2", 5/8", 3/4", 1"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [12] PEX 5206 Certified for Red, Blue, White 2-layer for 1/2", 5/8", 3/4", 1" sizes only. [14] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, ASTM F2098.
Tubing ^ ¢ +++ [G] [13] [14]*	PEX 5306	RIFENG PEXa	CSA B137.5
1/2", 5/8", 3/4", 1"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [13] PEX 5306 Certified for Red, Blue ,White 2-layer for 1/2", 5/8", 3/4", 1" sizes only. [14] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, ASTM F2098.
Tubing ^ ¢ +++ [8] [G]*	PEX 5106	RIFENG PEX	ASTM F876/F877
3/8" - 1"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [8] Certified for the following: 2-layer skinned (Natural PEX – White PE) pipe [PEX 5106]: 3/8", 1/2", 5/8", 3/4" & 1" 2-layer skinned (Natural PEX – Red, White or Blue PE) pipe [PEX 5306]: 3/8", 1/2", 5/8", 3/4" & 1" [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing ^ ¢ +++ [G] [10]*	PEX 5106	RIFENG PEX	ASTM F876/F877
>= 1/8"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [10] Certified for red and white PEX 5106 monowall pipe.
Tubing ^ ¢ +++ [8] [G]*	PEX 5306	RIFENG PEX	ASTM F876/F877
3/8" - 1"
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [8] Certified for the following: 2-layer skinned (Natural PEX – White PE) pipe [PEX 5106]: 3/8", 1/2", 5/8", 3/4" & 1" 2-layer skinned (Natural PEX – Red, White or Blue PE) pipe [PEX 5306]: 3/8", 1/2", 5/8", 3/4" & 1" [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing& ^ ~ ¢ +++ [8] [G]*	PEX 5106	RIFENG PEX	CSA B137.5
3/8" - 1"
& Meets the chlorine resistance requirements of ASTM F1281 when tested in accordance with ASTM F2023. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, white, blue, orange, natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [8] Certified for the following: 2-layer skinned (Natural PEX – White PE) pipe [PEX 5106]: 3/8", 1/2", 5/8", 3/4" & 1" 2-layer skinned (Natural PEX – Red, White or Blue PE) pipe [PEX 5306]: 3/8", 1/2", 5/8", 3/4" & 1" [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing& ^ ~ ¢ +++ [G] [10] [11]*	PEX 5106	RIFENG PEX	CSA B137.5
& Meets the chlorine resistance requirements of ASTM F1281 when tested in accordance with ASTM F2023. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, white, blue, orange, natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [10] Certified for red and white PEX 5106 monowall pipe. [11] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM F1960, ASTM F2080, ASTM F2098, ASSE 1061.
Tubing& ^ ~ ¢ +++ [8] [9] [G]*	PEX 5306	RIFENG PEX	CSA B137.5
3/8" - 1"
& Meets the chlorine resistance requirements of ASTM F1281 when tested in accordance with ASTM F2023. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. ~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, white, blue, orange, natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [8] Certified for the following: 2-layer skinned (Natural PEX – White PE) pipe [PEX 5106]: 3/8", 1/2", 5/8", 3/4" & 1" 2-layer skinned (Natural PEX – Red, White or Blue PE) pipe [PEX 5306]: 3/8", 1/2", 5/8", 3/4" & 1" [9] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked with the following fitting system designations: ASTM F1807, ASTM F2159. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Number of matching Manufacturers is 1
Number of matching Products is 1023
Processing time was 1 seconds

NSF Product and Service Listings

Did you know?

Connect with NSF