NSF Product and Service Listings
These NSF Official Listings are current as of Wednesday, October 14, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?Company=C0006197&Standard=0MP&
MP
Mechanical Plumbing Products
Mechanical Plumbing Products
| Canplas Industries Ltd. | |
| 500 Veterans Drive | |
| Barrie, ON L4M 4V3 | |
| Canada | |
| 800-461-1771 | |
| 705-726-3361 | |
| Visit this company's website |
Facility : #2 Canada
| Product Type | Material Type | Trade Name | Product Standard | |||
Grease Interceptor¢ [1] [2] [3] |
MLTPL |
Canplas |
ASME A112.14.3 |
|||
| 3925XTA02 | ||||||
| 3925XTA03 | ||||||
| 3925A02LO | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Tested and rated as Type A - Units with an external flow control, with air intake(vent):
directly connected.
[2] (M) - Mechanical connectors
(T) or (MT) - Threaded connectors
(S) - Spigot connector
[3] Flow rate - 25 gpm
|
||||||
Grease Interceptor¢ [1] [2] [3] |
MLTPL |
Canplas |
CSA B481.1 |
|||
| 3925XTA02 | ||||||
| 3925XTA03 | ||||||
| 3925A02LO | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Tested and rated as Type A - Units with an external flow control, with air intake(vent):
directly connected.
[2] (M) - Mechanical connectors
(T) or (MT) - Threaded connectors
(S) - Spigot connector
[3] Flow rate - 25 gpm
|
||||||
Grease Interceptor |
MLTPL |
Canplas |
ASME A112.14.3 |
|||
| 3907A02(S) - Endura7 GPM Mini Grease Interceptor¢ [1] [4] | ||||||
|
3910A02(S) - Endura10 GPM Mini Grease Interceptor¢ [1] [5] |
||||||
|
3915A02(S) - Endura15 GPM Mini Grease Interceptor¢ [1] [6] |
||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Tested and rated as Type A - Units with an external flow control, with air intake(vent):
directly connected.
[4] Flow rate - 7 gpm
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Tested and rated as Type A - Units with an external flow control, with air intake(vent):
directly connected.
[5] Flow rate - 10 gpm
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Tested and rated as Type A - Units with an external flow control, with air intake(vent):
directly connected.
[6] Flow rate - 15 gpm
|
||||||
Grease Interceptor |
MLTPL |
Canplas |
CSA B481.1 |
|||
| 3907A02(S) - Endura7 GPM Mini Grease Interceptor¢ [1] [4] | ||||||
|
3910A02(S) - Endura10 GPM Mini Grease Interceptor¢ [1] [5] |
||||||
|
3915A02(S) - Endura15 GPM Mini Grease Interceptor¢ [1] [6] |
||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Tested and rated as Type A - Units with an external flow control, with air intake(vent):
directly connected.
[4] Flow rate - 7 gpm
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Tested and rated as Type A - Units with an external flow control, with air intake(vent):
directly connected.
[5] Flow rate - 10 gpm
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Tested and rated as Type A - Units with an external flow control, with air intake(vent):
directly connected.
[6] Flow rate - 15 gpm
|
||||||
Facility : Barrie, Ontario, Canada
| Product Type | Material Type | Trade Name | Product Standard | |||
Grease Interceptors |
MLTPL |
Canplas |
ASME A112.14.3 |
|||
| 4075A04(T) - Endura XL 75¢ [1] [2] [3] [7] | ||||||
|
4075A04(M) - Endura XL 75¢ [1] [2] [3] [7] |
||||||
|
4075A04(MT) - Endura XL 75¢ [1] [2] [3] [7] |
||||||
|
40100A04(T) - Endura XL 100¢ [1] [2] [5] [8] |
||||||
|
40100A04(M) - Endura XL 100¢ [1] [2] [5] [8] |
||||||
|
40100A04(MT) - Endura XL 100¢ [1] [2] [5] [8] |
||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Tested and rated as Type A - Units with an external flow control, with air intake
(vent): directly connected.
[2] Tested and rated as Type C - Unit without an external flow control: directly connected.
[3] Flow rate - 75 gpm
[7] 75 gpm - Rate capacity with Type A, external vented flow control: 559 lbs. (using
accelerated protocol based on ASME A112.14.3) Rate capacity with Type C, internal
non-vented flow control: 208 lbs.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Tested and rated as Type A - Units with an external flow control, with air intake
(vent): directly connected.
[2] Tested and rated as Type C - Unit without an external flow control: directly connected.
[5] Flow rate - 100 gpm
[8] 100 gpm - Rate capacity with Type A, external vented flow control: 1058 lbs. (using
accelerated protocol based on ASME A112.14.3) Rated capacity with Type C, internal
non-vented flow control 288 lbs.
|
||||||
Grease Interceptors |
MLTPL |
Canplas |
CSA B481 |
|||
| 4075A04(T) - Endura XL 75¢ [1] [2] [3] | ||||||
|
4075A04(M) - Endura XL 75¢ [1] [2] [3] |
||||||
|
4075A04(MT) - Endura XL 75¢ [1] [2] [3] |
||||||
|
40100A04(T) - Endura XL 100¢ [1] [2] [4] [5] |
||||||
|
40100A04(M) - Endura XL 100¢ [1] [2] [4] [5] |
||||||
|
40100A04(MT) - Endura XL 100¢ [1] [2] [4] [5] |
||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Tested and rated as Type A - Units with an external flow control, with air intake
(vent): directly connected.
[2] Tested and rated as Type C - Unit without an external flow control: directly connected.
[3] Flow rate - 75 gpm
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Tested and rated as Type A - Units with an external flow control, with air intake
(vent): directly connected.
[2] Tested and rated as Type C - Unit without an external flow control: directly connected.
[4] (M) - Mechanical connectors
(T) or (MT) - Threaded connectors
(S) - Spigot connector
[5] Flow rate - 100 gpm
|
||||||
Grease Interceptors |
MLTPL |
Canplas |
SE 15741 |
|||
| 4075A04(T) - Endura XL 75¢ [1] [2] [3] [7] | ||||||
|
4075A04(M) - Endura XL 75¢ [1] [2] [3] [7] |
||||||
|
4075A04(MT) - Endura XL 75¢ [1] [2] [3] [7] |
||||||
|
40100A04(T) - Endura XL 100¢ [1] [2] [5] [8] |
||||||
|
40100A04(M) - Endura XL 100¢ [1] [2] [5] [8] |
||||||
|
40100A04(MT) - Endura XL 100¢ [1] [2] [5] [8] |
||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Tested and rated as Type A - Units with an external flow control, with air intake
(vent): directly connected.
[2] Tested and rated as Type C - Unit without an external flow control: directly connected.
[3] Flow rate - 75 gpm
[7] 75 gpm - Rate capacity with Type A, external vented flow control: 559 lbs. (using
accelerated protocol based on ASME A112.14.3) Rate capacity with Type C, internal
non-vented flow control: 208 lbs.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Tested and rated as Type A - Units with an external flow control, with air intake
(vent): directly connected.
[2] Tested and rated as Type C - Unit without an external flow control: directly connected.
[5] Flow rate - 100 gpm
[8] 100 gpm - Rate capacity with Type A, external vented flow control: 1058 lbs. (using
accelerated protocol based on ASME A112.14.3) Rated capacity with Type C, internal
non-vented flow control 288 lbs.
|
||||||
Grease Interceptors¢ [1] [4] [6] |
MLTPL |
Canplas |
ASME A112.14.3 |
|||
| 3925XTA02 | ||||||
| 3925XTA03 | ||||||
| 3925A02LO | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Tested and rated as Type A - Units with an external flow control, with air intake
(vent): directly connected.
[4] (M) - Mechanical connectors
(T) or (MT) - Threaded connectors
(S) - Spigot connector
[6] Flow rate - 25 gpm
|
||||||
Grease Interceptors¢ [1] [4] [6] |
MLTPL |
Canplas |
CSA B481.1 |
|||
| 3925XTA02 | ||||||
| 3925XTA03 | ||||||
| 3925A02LO | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Tested and rated as Type A - Units with an external flow control, with air intake
(vent): directly connected.
[4] (M) - Mechanical connectors
(T) or (MT) - Threaded connectors
(S) - Spigot connector
[6] Flow rate - 25 gpm
|
||||||
Grease Interceptors |
MLTPL |
Canplas |
ASME A112.14.3 |
|||
| 3907A02(S) - Endura 7 GPM Mini Grease Interceptor¢ [1] [9] | ||||||
|
3910A02(S) - Endura 10 GPM Mini Grease Interceptor¢ [1] [10] |
||||||
|
3915A02(S) - Endura 15 GPM Mini Grease Interceptor¢ [1] [11] |
||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Tested and rated as Type A - Units with an external flow control, with air intake
(vent): directly connected.
[9] Flow rate - 7 gpm
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Tested and rated as Type A - Units with an external flow control, with air intake
(vent): directly connected.
[10] Flow rate - 10 gpm
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Tested and rated as Type A - Units with an external flow control, with air intake
(vent): directly connected.
[11] Flow rate - 15 gpm
|
||||||
Grease Interceptors |
MLTPL |
Canplas |
CSA B481 |
|||
| 3907A02(S) - Endura 7 GPM Mini Grease Interceptor¢ [1] [9] | ||||||
|
3910A02(S) - Endura 10 GPM Mini Grease Interceptor¢ [1] [10] |
||||||
|
3915A02(S) - Endura 15 GPM Mini Grease Interceptor¢ [1] [11] |
||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Tested and rated as Type A - Units with an external flow control, with air intake
(vent): directly connected.
[9] Flow rate - 7 gpm
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Tested and rated as Type A - Units with an external flow control, with air intake
(vent): directly connected.
[10] Flow rate - 10 gpm
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Tested and rated as Type A - Units with an external flow control, with air intake
(vent): directly connected.
[11] Flow rate - 15 gpm
|
||||||
Grease Interceptors¢ [2] [12] [13] |
MLTPL |
Canplas |
ASME A112.14.3/CSA B481.1 |
|||
| 3950IE03 | ||||||
| 3950IE04 | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [2] Tested and rated as Type C - Unit without an external flow control: directly connected. [12] Flow rate - 50 gpm [13] Tested and rated as Type D - Unit without an external flow control: indirectly connected. |
||||||
Number of matching Manufacturers is 1
Number of matching Products is 44
Processing time was 0 seconds
