NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, November 21, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?Company=C0034994&

Did you know?

The new NSF Product Listings website is available for NSF/ANSI 14-Certified products with a new look and feel. Click on "Try it Now" to check it out!
NSF/ANSI 14
Plastics Piping System Components and Related Materials

Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document


 
PPI PIPE Co., Ltd. 
1085-11, Beodeul-ro, Jangan-myeon
Hwaseong-si, Gyeonggi-do 445-941 
Korea, Republic of 
82 31 359 0082
Visit this company's website

Facility : # 1 Gyeonggi-do, Republic of Korea

Drain, Waste, and Vent - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe§		  
PVC		  
DH2040 Pipe		  
ASTM D2665
1 1/4" - 4" 

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe		  
PVC		  
DH2040 Pipe		  
SE 12787
35 mm - 300 mm

Fittings[1]		  
PVC		  
ONE-STEP COMMERCIAL DWV COMPRESSION FITTINGS		  
SE 12787
35 mm - 250 mm 

[1] Product is Certified for the following configurations:
    
    Coupling 
    50mm (2")
    75mm (3")
    100mm (4")
    125mm (5")
    150mm (6")
    200mm (8")
    250mm (10")
    
    Increaser - Reducer 
    50mm x 35mm (2" x 1¼")
    75mm x 50mm (3" x 2")
    100mm x 50mm (4" x 2")
    100mm x 75mm (4" x 3")
    125mm x 100mm (5" x 4")
    150mm x 100mm (6" x 4")
    150mm x 125mm (6" x 5")
    200mm x 150mm (8" x 6")
    250mm x 200mm (10" x 8")
    
    90° Elbow
    35mm (1¼")
    50mm (2")
    75mm (3")
    100mm (4")
    125mm (5")
    150mm (6")
    200mm (8")
    250mm (10")
    
    45° Elbow
    35mm (1¼")
    50mm (2")
    75mm (3")
    100mm (4")
    125mm (5")
    150mm (6") 
    200mm (8")
    250mm (10")
    
    22.5° Elbow
    100mm (4")
    125mm (5")
    150mm (6")
    200mm (8")
    
    11.25° Elbow
    100mm (4")
    125mm (5")
    
    Sanitary Tee
    50mm (2") 
    75mm (3")
    100mm (4") 
    125mm (5")
    150mm (6")
    200mm (8")
    250mm (10")
    50mm x 35mm (2" x 1¼")
    50mm x 40mm (2" x 1½")
    75mm x 35mm (3" x 1¼")
    75mm x 50mm (3" x 2")
    100mm x 50mm (4" x 2")
    100mm x 75mm (4" x 3")
    125mm x 50mm (5" x 2")
    125mm x 75mm (5" x 3")
    125mm x 100mm (5" x 4")
    150mm x 50mm (6" x 2")
    150mm x 75mm (6" x 3")
    150mm x 100mm (6" x 4")
    150mm x 125mm (6" x 5")
    200mm x 100mm (8" x 4")
    200mm x 125mm (8" x 5")
    200mm x 150mm (8" x 6")
    250mm x 100mm (10" x 4")
    250mm x 125mm (10" x 5")
    250mm x 150mm (10" x 6")
    250mm x 200mm (10" x 8")
    
    Sanitary Tee/Closed Cap
    50mm (2")
    75mm (3")
    100mm (4")
    125mm (5")
    150mm (6")
    200mm (8")
    250mm (10")
    50mm x 35mm (2" x 1¼")
    50mm x 40mm (2" x 1½")
    75mm x 35mm (3" x 1¼")
    75mm x 50mm (3" x 2")
    100mm x 50mm (4" x 2")
    100mm x 75mm (4" x 3")
    125mm x 50mm (5" x 2")
    125mm x 75mm (5" x 3")
    125mm x 100mm (5" x 4")
    150mm x 50mm (6" x 2")
    150mm x 75mm (6" x 3")
    150mm x 100mm (6" x 4")
    150mm x 125mm (6" x 5")
    200mm x 100mm (8" x 4")
    200mm x 125mm (8" x 5")
    200mm x 150mm (8" x 6")
    250mm x 100mm (10" x 4")
    250mm x 125mm (10" x 5")
    250mm x 150mm (10" x 6")
    250mm x 200mm (10" x 8")
    
    Wye
    50mm (2")
    75mm (3")
    100mm (4")
    125mm (5")
    150mm (6")
    200mm (8")
    250mm (10")
    50mm x 35mm (2" x 1¼")
    50mm x 40mm (2" x 1½")
    75mm x 35mm (3" x 1¼")
    75mm x 50mm (3" x 2")
    100mm x 50mm (4" x 2")
    100mm x 75mm (4" x 3")
    125mm x 50mm (5" x 2")
    125mm x 75mm (5" x 3")
    125mm x 100mm (5" x 4")
    150mm x 50mm (6" x 2")
    150mm x 75mm (6" x 3")
    150mm x 100mm (6" x 4")
    150mm x 125mm (6" x 5")
    200mm x 100mm (8" x 4")
    200mm x 125mm (8" x 5")
    200mm x 150mm (8" x 6")
    250mm x 100mm (10" x 4")
    250mm x 125mm (10" x 5")
    250mm x 150mm (10" x 6")
    250mm x 200mm (10" x 8")
    
    Wye/Closed Cap
    50mm (2")
    75mm (3")
    100mm (4")
    125mm (5")
    150mm (6")
    200mm (8")
    250mm (10")
    50mm x 35mm (2" x 1¼")
    50mm x 40mm (2" x 1½")
    75mm x 35mm (3" x 1¼")
    75mm x 50mm (3" x 2")
    100mm x 50mm (4" x 2")
    100mm x 75mm (4" x 3")
    125mm x 50mm (5" x 2")
    125mm x 75mm (5" x 3")
    125mm x 100mm (5" x 4")
    150mm x 50mm (6" x 2")
    150mm x 75mm (6" x 3")
    150mm x 100mm (6" x 4")
    150mm x 125mm (6" x 5")
    200mm x 100mm (8" x 4")
    200mm x 125mm (8" x 5")
    200mm x 150mm (8" x 6")
    250mm x 100mm (10" x 4")
    250mm x 125mm (10" x 5")
    250mm x 150mm (10" x 6")
    250mm x 200mm (10" x 8")
    
    Long Sweep 90° Elbow
    50mm (2")
    75mm (3")
    100mm (4")
    125mm (5")
    150mm (6")
    200mm (8")
    
    Long 90° Elbow with Cleanout
    75mm (3")
    100mm (4")
    100mm x 75mm (4" x 3")
    125mm x 100mm (5" x 4")
    150mm x 100mm (6" x 4")
    
    90° Elbow with Cleanout
    100mm (4")
    100mm x 75mm (4" x 3")
    125mm x 100mm (5" x 4")
    		
    U-Trap
    75mm (3")
    100mm (4")
    125mm (5")
    150mm (6")
    
    P-Trap
    40mm (1½")
    50mm (2")
    		
    Tee with Cleanout
    100mm (4")
    125mm (5")
    
    45L-S
    100mm (4")
    125mm (5")
    150mm (6")
    
    Clamp
    100mm (4")
    125mm (5")
    150mm (6") 200mm (8")
    250mm (10")


Fire Main - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings#		  
MLTPL		  
iPVC fitting		  
UL 1285
PC 235: 4", 6", 8"
PC 305: 4", 6", 8" 

# Certified for PC 235 & PC 305 for the following configurations:
  iPVC Fitting-a
  Coupling (Socket) - 4", 6", & 8"
  11.25° Elbow - 4", 6", & 8"
  22.5° Elbow - 4", 6", & 8"
  45° Elbow - 4", 6", & 8"
  90° Elbow - 4", 6", & 8"
  Reducer Socket - 6" x 4", 8" x 4", & 8" x 6"
  Tee - 4", 6", 8", 6" x 4", 8" x 4", & 8" x 6"
  Flange socket - 6" & 8"
  
  iPVC Fitting
  Coupling(Socket) - 6", & 8"
  Repair Coupling(Socket) - 6", & 8"
  11.25 Elbow - 6", & 8"
  22.5 Elbow - 6", & 8"
  45 Elbow - 6", & 8"
  90 Elbow - 6", & 8"
  Reducer Socket - 8" x 6"
  Tee - 6", 8", & 8" x 6"
  Flange Tee - 6", 8", 6" x 4", 8" x 6", & 8" x 4"
  Flange socket - 6", & 8"

Fittings#		  
MLTPL		  
iPVC fitting-a		  
UL 1285		 

# Certified for PC 235 & PC 305 for the following configurations:
  iPVC Fitting-a
  Coupling (Socket) - 4", 6", & 8"
  11.25° Elbow - 4", 6", & 8"
  22.5° Elbow - 4", 6", & 8"
  45° Elbow - 4", 6", & 8"
  90° Elbow - 4", 6", & 8"
  Reducer Socket - 6" x 4", 8" x 4", & 8" x 6"
  Tee - 4", 6", 8", 6" x 4", 8" x 4", & 8" x 6"
  Flange socket - 6" & 8"
  
  iPVC Fitting
  Coupling(Socket) - 6", & 8"
  Repair Coupling(Socket) - 6", & 8"
  11.25 Elbow - 6", & 8"
  22.5 Elbow - 6", & 8"
  45 Elbow - 6", & 8"
  90 Elbow - 6", & 8"
  Reducer Socket - 8" x 6"
  Tee - 6", 8", & 8" x 6"
  Flange Tee - 6", 8", 6" x 4", 8" x 6", & 8" x 4"
  Flange socket - 6", & 8"

Pipe		  
PVC		  
iPVC Water Pipe		  
UL 1285
PC 235: 4" - 18"
PC 305: 4" - 16"

Pipe+		  
PVC		  
iPVC Water Pipe		  
FM 1612
14" - 16" DR 14 PC 305 and DR 18 PC 235
4" - 12" DR 14 PC 250 and DR 18 PC 185 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Pipe		  
PVC		  
Pyungwha PVC Pipe		  
UL 1285
PC 235: 4" - 16"
PC 305: 4" - 16"

Pipe+		  
PVC		  
Pyungwha PVC Pipe		  
FM 1612
14" - 16" DR 14 PC 305 and DR 18 PC 235
4" - 12" DR 14 PC 250 and DR 18 PC 185 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Pipe		  
PVC		  
PVC Water Pipe		  
UL 1285
PC 235: 4" - 16"
PC 305: 4" - 16"

Pipe+		  
PVC		  
PVC Water Pipe		  
FM 1612
14" - 16" DR 14 PC 305 and DR 18 PC 235
4" - 12" DR 14 PC 250 and DR 18 PC 185 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.


Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+ §		  
PVC		  
iPVC Water Pipe		  
ASTM D1785
1/8" - 16" Sch 40
1/8" - 16" Sch 80
1/8" - 16" Sch 120 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe+ §		  
PVC		  
iPVC Water Pipe		  
AWWA C900
4" - 16" DR 14
4" - 18" DR 18
4" - 16" DR 25 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe* +		  
PVC		  
iPVC Water Pipe		  
SE 9167
50 mm - 630 mm 

* SE 9167: Special Engineered document for Metric-Sized PVC Water Pipe. This document
  includes testing to ASTM D1785 and AWWA C900.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Pipe+		  
PVC		  
iPVC Water Pipe		  
SE 9167
16 mm – 400 mm 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Pipe+ §		  
PVC		  
PVC Water Pipe		  
ASTM D1785
1/8" – 16" Sch 120
1/8" – 16" Sch 40
1/8" – 16" Sch 80 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe+ §		  
PVC		  
PVC Water Pipe		  
AWWA C900
4" - 16" DR 14
4" - 16" DR 18
4" - 16" DR 25 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe+		  
PVC		  
PVC Water Pipe		  
SE 9167
16 mm – 400 mm 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Pipe* +		  
PVC		  
PVC Water Pipe		  
SE 9167
50 mm - 630 mm 

* SE 9167: Special Engineered document for Metric-Sized PVC Water Pipe. This document
  includes testing to ASTM D1785 and AWWA C900.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Pipe+ §		  
PVC		  
Pyungwha PVC Pipe		  
ASTM D1785
1/8" - 16" Sch 40
1/8" - 16" Sch 80
1/8" - 16" Sch 120 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe+ §		  
PVC		  
Pyungwha PVC Pipe		  
AWWA C900
4" - 16" DR 14
4" - 16" DR 18
4" - 16" DR 25 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe*		  
PVC		  
Pyungwha PVC Pipe		  
SE 9167
16 mm - 400 mm 

* SE 9167: Special Engineered document for Metric-Sized PVC Water Pipe. This document
  includes testing to ASTM D1785 and AWWA C900.

Pipe* +		  
PVC		  
Pyungwha PVC pipe		  
SE 9167
50 mm - 630 mm 

* SE 9167: Special Engineered document for Metric-Sized PVC Water Pipe. This document
  includes testing to ASTM D1785 and AWWA C900.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.


Facility : # 2 Gyeonggi-Do, Republic of Korea

Drain, Waste, and Vent - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings		  
PP		  
GLF (GLUE LESS FITTING) FITTINGS[1]		  
SE 14317 

[1] The following configurations are certified with the size of 35 mm - 100mm and 1 1/2" -
    4":
    45 Degree Elbow
    Sanitary Tee / closed cap
    WYE / closed cap
    90 Degree Elbow
    Coupling
    Repair Coupling
    Increaser - Reducer
    Long Sweep 90 Degree Elbow
    P - Trap
    S / P - Trap
    WYE
    Sanitary Tee

Fittings		  
PP		  
GLS (GLUE LESS SOUNDPROOF) FITTINGS[1]		  
SE 14317 

[1] The following configurations are certified with the size of 35 mm - 100mm and 1 1/2" -
    4":
    45 Degree Elbow
    Sanitary Tee / closed cap
    WYE / closed cap
    90 Degree Elbow
    Coupling
    Repair Coupling
    Increaser - Reducer
    Long Sweep 90 Degree Elbow
    P - Trap
    S / P - Trap
    WYE
    Sanitary Tee

Fittings		  
PP		  
GLS-W(GLUE LESS SOUNDPROOF WINDOW) FITTINGS[1]		  
SE 14317 

[1] The following configurations are certified with the size of 35 mm - 100mm and 1 1/2" -
    4":
    45 Degree Elbow
    Sanitary Tee / closed cap
    WYE / closed cap
    90 Degree Elbow
    Coupling
    Repair Coupling
    Increaser - Reducer
    Long Sweep 90 Degree Elbow
    P - Trap
    S / P - Trap
    WYE
    Sanitary Tee

Fittings		  
PP		  
ONE-STEP DRF DWV COMPRESSION FITTINGS[1]		  
SE 14317 

[1] The following configurations are certified with the size of 35 mm - 100mm and 1 1/2" -
    4":
    45 Degree Elbow
    Sanitary Tee / closed cap
    WYE / closed cap
    90 Degree Elbow
    Coupling
    Repair Coupling
    Increaser - Reducer
    Long Sweep 90 Degree Elbow
    P - Trap
    S / P - Trap
    WYE
    Sanitary Tee

Fittings		  
PP		  
ONE - STEP SOUNDPROOF DWV FITTINGS[1]		  
SE 14317 

[1] The following configurations are certified with the size of 35 mm - 100mm and 1 1/2" -
    4":
    45 Degree Elbow
    Sanitary Tee / closed cap
    WYE / closed cap
    90 Degree Elbow
    Coupling
    Repair Coupling
    Increaser - Reducer
    Long Sweep 90 Degree Elbow
    P - Trap
    S / P - Trap
    WYE
    Sanitary Tee

Number of matching Manufacturers is 1
Number of matching Products is 47
Processing time was 0 seconds