NSF Product and Service Listings
These NSF Official Listings are current as of Thursday, January 15, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?Company=C0048711&Standard=0MP&
MP
Mechanical Plumbing Products
Mechanical Plumbing Products
| Zurn Water, LLC | |
| 1801 Pittsburgh Avenue | |
| Erie, PA 16502 | |
| United States | |
| 814-875-1376 | |
| Visit this company's website |
Facility : Caddo Mills, TX
| Product Type | Material Type | Trade Name | Product Standard | |||
Cleanouts§ |
SS |
Cleanout Cover |
ASME A112.36.2/CSAB79.2 |
|||
| 1/2" thick cover (7 3/4" x 7 3/4")# | ||||||
# Certified for 3" and 4" outlet sizes with a load classification of Extra Heavy Duty. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Commercial Floor Drains* § |
SS |
Z1805 Series |
ASME A112.6.3 |
|||
| [A]1805-12B-[C]-[D]-[E] | ||||||
| 12" Diameter Round Sanitary Floor Drain | ||||||
| [A]1805-12S-[C]-[D]-[E] | ||||||
| 12" Square Sanitary Floor Drain | ||||||
* Product Nomenclature:
[A] - Stainless Steel Type
Z - Type 304 Stainless Steel
ZM - Type 316 Stainless Steel
[C] - Outlet Size and Type
3NH - 3" No-Hub
4NH - 4" No-Hub
6NH - 6" No-Hub
3BW - 3" Butt-Weld
4BW - 4" Butt-Weld
6BW - 6" Butt-Weld
[D] - Grate/Cover Options
-H3 (with 3" outlets only) - Special Duty Perimeter Gap Grate
-H5 - Extra Heavy Duty Slotted Grate
-H9 (with 3" and 4" outlets only) - Medium Duty Perforated Grate
[E] - Miscellaneous Options
-K - Anchor Flange
-KC - Anchor Flange with Seepage Holes & Clamp Collar
-MG - EZ Lock Magnetic System with Secured Secondary Strainer
-P - 3/4 Trap Primer Connection
-VP - Vandal Proof Secured Top
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
|
||||||
Commercial Floor Drains* ¢ § |
SS |
Z1805 Series |
CSA B79 |
|||
| [A]1805-12B-[C]-[D]-[E] | ||||||
| 12" Diameter Round Sanitary Floor Drain | ||||||
| [A]1805-12S-[C]-[D]-[E] | ||||||
| 12" Square Sanitary Floor Drain | ||||||
* Product Nomenclature:
[A] - Stainless Steel Type
Z - Type 304 Stainless Steel
ZM - Type 316 Stainless Steel
[C] - Outlet Size and Type
3NH - 3" No-Hub
4NH - 4" No-Hub
6NH - 6" No-Hub
3BW - 3" Butt-Weld
4BW - 4" Butt-Weld
6BW - 6" Butt-Weld
[D] - Grate/Cover Options
-H3 (with 3" outlets only) - Special Duty Perimeter Gap Grate
-H5 - Extra Heavy Duty Slotted Grate
-H9 (with 3" and 4" outlets only) - Medium Duty Perforated Grate
[E] - Miscellaneous Options
-K - Anchor Flange
-KC - Anchor Flange with Seepage Holes & Clamp Collar
-MG - EZ Lock Magnetic System with Secured Secondary Strainer
-P - 3/4 Trap Primer Connection
-VP - Vandal Proof Secured Top
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
|
||||||
Floor Drains§ |
SS |
Food Service Drains |
ASME A112.6.3/CSAB79.3 |
|||
| 1/4" Slotted 10" diameter% | ||||||
|
1/2" Slotted 10" diameter# |
||||||
|
10 Gauge Perforated 10" diameter& |
||||||
% Certified for 3" and 4" outlet sizes with a load classification of Heavy Duty. # Certified for 3" and 4" outlet sizes with a load classification of Extra Heavy Duty. & Certified for 3" and 4" outlet sizes with a load classification of Light Duty. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Trench Drains § |
SS |
Trench Drains |
ASME A112.6.8/CSA B79.8 |
|||
| 1/4" Slotted with 2 support bars (24"l x 9 1/4"w)% | ||||||
|
1/4" Slotted (24"l x 9 1/4"w)% |
||||||
|
1/2" Slotted (24"l x 9 1/2"w) w/ 1/4" x 1" frame# |
||||||
|
1/2" Slotted (24"l x 5.812"w) w/ 1/4" x 1" frame# |
||||||
|
1/4" x 1 1/2" Bars on 1"centers 12"O.D.# |
||||||
|
10 Gauge Slotted (24"l x 9 1/2"w)& |
||||||
|
10 Gauge Slotted (24"l x 5.812"w)& |
||||||
|
12 Gauge Perforated& |
||||||
|
1/4"X 1 1/2"Bars on 1"centers 6"I.D.# |
||||||
% Certified for 3" and 4" outlet sizes with a load classification of Heavy Duty. # Certified for 3" and 4" outlet sizes with a load classification of Extra Heavy Duty. & Certified for 3" and 4" outlet sizes with a load classification of Light Duty. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Number of matching Manufacturers is 1
Number of matching Products is 21
Processing time was 0 seconds
