NSF Product and Service Listings
These NSF Official Listings are current as of Thursday, January 29, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?Company=C0096143&Standard=014&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| Teel Plastics Inc. | |
| 1060 Teel Court | |
| Baraboo, WI 53913 | |
| United States | |
| 608-355-3080 | |
| Visit this company's website |
Facility : Baraboo, WI
Fire Main - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* + |
PE 4710 |
Teel Plastics PE4710 Pressure Pipe |
FM 1613 |
|||
| IPS 2", 3", 4", & 6" (PC 250) DR 9 | ||||||
| IPS 2", 3", 4", & 6" (PC 200) DR 11 | ||||||
* Products comply with requirements of NFPA 24 Standard for the Installation of Private Fire Service Mains and Their Appurtenances. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ |
PE 4710 |
Teel Plastics PE4710 Pressure Pipe |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
Pipe+ |
PE 4710 |
Teel Plastics PE4710 Pressure Pipe |
AWWA C906 |
|||
| 4" - 8" DR 7 | ||||||
| 4" - 8" DR 9 | ||||||
| 4" - 8" DR 11 | ||||||
| 4" - 8" DR 13.5 | ||||||
| 4" - 8" DR 15.5[2] | ||||||
|
4" - 8" DR 17 |
||||||
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure the
product is suitable for the intended application.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
Pipe+ |
PE 4710 |
Teel Plastics PE4710 Pressure Pipe |
ASTM D2737 |
|||
| 3/4" - 2" SDR 7.3 | ||||||
| 3/4" - 2" SDR 9 | ||||||
| 3/4" - 2" SDR 11[1] | ||||||
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and
are not certified for use in applications where an oxidative resistance classification
(e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
Pipe+ |
PE 4710 |
Teel Plastics PE4710 Pressure Pipe |
ASTM D3035 |
|||
| 3/4" - 3" SDR 7 | ||||||
| 3/4" - 3" SDR 9 | ||||||
| 3/4" - 3" SDR 11[1] | ||||||
|
3/4" - 3" SDR 13.5[1] |
||||||
|
3/4" - 3" SDR 15.5[1] |
||||||
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and
are not certified for use in applications where an oxidative resistance classification
(e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
Pipe+ |
PE 4710 |
Teel Plastics PE 4710 Pressure Pipe |
ASTM F714 |
|||
| 4" - 8" SDR 7 | ||||||
| 4" - 8" SDR 9 | ||||||
| 4" - 8" SDR 11 | ||||||
| 4" - 8" SDR 13.5 | ||||||
| 4" - 8" SDR 15.5[2] | ||||||
|
4" - 8" SDR 17 |
||||||
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure the
product is suitable for the intended application.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
Geothermal Applications
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ |
PE 4710 |
Teel Plastics PE4710 Pressure Pipe |
ASTM D2737 |
|||
| 3/4" - 2" SDR 9 | ||||||
| 3/4" - 2" SDR 11 | ||||||
| 3/4" - 2" SDR 15.5 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
Pipe+ |
PE 4710 |
Teel Plastics PE4710 Pressure Pipe |
ASTM D3035 |
|||
| 3/4" - 2" SDR 15.5 | ||||||
| 3/4" - 8" SDR 9 | ||||||
| 3/4" - 8" SDR 11 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
Number of matching Manufacturers is 1
Number of matching Products is 29
Processing time was 0 seconds
