NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, January 15, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?Company=C0174516&Standard=014&

Did you know?

The new NSF Product Listings website is available for NSF/ANSI 14-Certified products with a new look and feel. Click on "Try it Now" to check it out!
NSF/ANSI 14
Plastics Piping System Components and Related Materials

Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document


 
Mueller Plastics Corporation 
8285 Tournament Drive
Suite 150 
Memphis, TN 38125 
United States 
901-753-3200

Facility : # 1 USA

Drain, Waste, and Vent - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings@		  
PVC		  
CPF®**		  
ASTM D2665

PVC 100 - Coupling (Hub x Hub)
1 1/4" 05932, 1 1/2" 05933, 2" 05934, 3" 05935, 4" 05936   6" 06143, 8" 06145, 10" 06150, 12" 06151  

PVC 101 - Female Adapter (FPT x Hub)
1 1/4" 05868, 1 1/2" 05866, 2" 05867, 3" 05869, 4" 06396, 6" 06147, 8"  

PVC 102 - Pipe Increaser-Reducer (Hub x Hub)
1 1/2" x 2" 05948, 1 1/2" x 3" 05949, 2" x 3" 05950   2" x 4" 05951, 3" x 4" 05952, 3" x 6", 4" x 6" 05981   4" x 8", 4" x 10", 4" x 12", 6" x 8", 6" x 10", 6" x 12"   8" x 10", 8" x 12", 10" x 12"  

PVC 103 - Trap Adapter-Male
1 1/2"   1 1/2" x 1 1/4"   2"  

PVC 103P - Trap Adapter-Male
1 1/2" 06393   1 1/2" x 1 1/4" 06379   2"  

PVC 103R - Trap Adapter-Male
1 1/2"   1 1/2" x 1 1/4" 06389   2"  

PVC 103W - Trap Adapter-Male
1 1/2" 06410   1 1/2" x 1 1/4" 06409   2" 06390  

PVC 103X - Trap Adapter-Male
1 1/2" 06392   1 1/2" x 1 1/4" 06378   2" 06388  

PVC 104 - Trap Adapter-Female (Hub x SLIP)
1 1/2"   1 1/2" x 1 1/4"   1 1/4"   2"  

PVC 104P - Trap Adapter-Female (Hub x SLIP)
1 1/2" 06377   2"   1 1/4" 06381   1 1/2" x 1 1/4" 06395  

PVC 104R - Trap Adapter-Female (Hub x SLIP)
1 1/2" 06399   1 1/2" x 1 1/4"   1 1/4"   1 1/4" x 2"  
2"  

PVC 104W - Trap Adapter-Female (Hub x SLIP)
1 1/4" 06380   1 1/2" 06383   1 1/2" x 1 1/4" 06384   2" 06382  

PVC 104X - Trap Adapter-Female (Hub x SLIP)
1 1/2" 06376   1 1/4" 06371   1 1/2" x 1 1/4 06394   2" 06397  

PVC 105 - Fitting Cleanout Adapter (SPG x FPT)
1 1/2" 05922, 2" 05923 3" 05924, 4" 05925 6" 06148, 8"  

PVC 105-X - Fitting Cleanout Adapter w/C.O. Plug
1 1/2" 06001, 2" 06002, 3" 06003, 4" 06004, 6" 06005, 8"  

PVC 106 - Cleanout Plug (MPT)
1 1/2" 05938, 2" 05939, 3" 05941, 4" 05942, 6" 06146, 8", 10", 12"  

PVC 107 - Flush Bushing (SPG x HUB)
1/2" 05906, 1 1/2" x 1 1/4" 05904, 2" x 1 1/4" 05905, 2" x 1   3" x 1 1/2" 05907, 3" x 2" 05908, 4" x 2" 05910, 4" x 3" 05909   6" x 4" 06144, 8" x 4", 8" x 6" 06149, 10" x 4", 10" x 6"   10" x 8", 12" x 4", 12" x 6", 12" x 8"  

PVC 108 - Flush Bushing{Cleanout Adapter}(SPGxFPT)
2" x 1 1/2" 05913, 8" x 6", 10" x 8", 12" x 8"  

PVC 108X - Flush Bushing w/Plug
2" x 1 1/2", 10" x 8", 12" x 8"  

PVC 109 - Male Adapter (Not accept a tail piece)
1 1/4" 05931, 1 1/4" x 1 1/2", 1 1/2" 05927   1 1/2" x 1 1/4" 05926, 2" 05928, 3" 05929, 4" 05930  

PVC 110 - Flush C.O. Plug (MPT)
2" 06017, 3" 06018, 4" 06015  

PVC 111 - Male Adapter (SPG x MPT)
1 1/2" 06386   1 1/2" x 1 1/4" 06387   2" 06385  

PVC 116 - Cap (SOCKET)
1 1/2" 05977, 2" 05978, 3" 05979, 4" 05980, 6" 06057, 8" 06058, 10", 12"  

PVC 117–Adapter Coupling/Adapts S&D SPG to DWV SPG
4" x 3" 05962, 4" x 4" 05963  

PVC 118 - Adapter Bushing
3" 05990, 4" 05991  

PVC 119 - No Hub Adapter (Slip x Hub)
1 1/2" 05802, 2" 05954, 2" x 1 1/2" 05947, 3" 05955, 4" 05956, 4" x 3" 05953  

PVC 122 - Spigot Adapter, Cast Iron (Hub x Hub)
2" x 2" 05944, 3" x 3", 4" x 4" 05946  

PVC 123 - Hub Adapter, Cast Iron (Hub x SPG)
2" x 2" 05957, 3" x 3" 05958, 4" x 4" 05959  

PVC 123-R-Hub Adapter,Cast Iron,Increaser(HubxSPG)
1 1/2" x 2" 05961, 3" x 4" 05960  

PVC 130 - Repair Coupling (Hub x Hub)
1 1/2" 05965, 2" 05966, 3" 05967, 4" 05968, 6" 05969  

PVC 131 - Test Cap
1 1/2", 2", 3", 4"  

PVC 300 - 1/4 Bend (Hub x Hub)
1 1/4" 05875, 1 1/2" 05876, 2" 05877, 3" 05878   4" 05879, 6" 06130, 8" 06131, 10", 12"  

PVC 300-R - 1/4 Bend, Reducing (Hub x Hub)
2" x 1 1/2" 06092  

PVC 302 - 1/4 Bend, Street (SPG x Hub)
1 1/4" 05894 , 1 1/2" 05880, 2" 05881, 3" 05882, 4" 05883, 6" 05889, 8"  

PVC 303 -1/4 Bend with Low Heel Inlet(HubxHubxHub)
3" x 3" x 1 1/2" 06041, 3" x 3" x 2" 06042, 4" x 4" x 2" 06043  

PVC 304 - Long Sweep 1/4 Bend (Hub x Hub)
1 1/2" 05871, 2" 05872, 3" 05873, 4",05874 6"  

PVC 305 - Long Sweep 1/4 Bend W/High Heel Inlet
3" x 3" x 2" 06027  

PVC 307 - Long Sweep 1/4 Bend w/Low Heel Inlet
3" x 3" x 2" 06024  

PVC 309 - Long Sweep 1/4 Bend, Street (Hub x SPG)
1 1/2" 06060, 2" 06061, 3" 06063, 4" 06064  

PVC 310–¼ Bend Street Low Heel Inlet (HubxSPGxHub)
3" x 3" x 2" 06026  

PVC 319 - 1/6 Bend (Hub x Hub)
1 1/2" 05895, 2" 05896, 3" 05897, 4" 05982  

PVC 320 - 1/6 Bend Street (Hub x SPG)
1 1/2",06020 2" 06021, 3" 06022, 4" 06023  

PVC 321 - 1/8 Bend (Hub x Hub)
1 1/4" 05884, 1 1/2" 05885, 2" 05886   3" 05887, 4" 05888, 6" 06132, 8" 06134, 10", 12"  

PVC 323 - 1/8 Bend, Street (SPG x Hub)
1 1/4" 06016, 1 1/2" 05890, 2",05891 3" 05892   4" 05893, 6",06133 8",06136 10", 12"  

PVC 324 - 1/16 Bend (Hub x Hub)
1 1/2" 05899, 2" 05900, 3" 05901, 4" 05983, 6" 05988, 8", 10", 12"  

PVC 326 - 1/16 Bend, Street (SPG x Hub)
1 1/2" 05984, 2" 05985, 3" 05986, 4" 05987, 6" 06011  

PVC 327 - Double 1/4 Bend (Hub x Hub x Hub)
1 1/2" 06045, 2" 06046, 3" 06047, 2 x 1 1/2" x 1 1/2" 06049  

PVC 329 - Closet Bend, Reducing (Hub x Hub)
3" x 4" 06093  

PVC 330 - Closet Bend, Reducing (Hub x SPG)
3" x 4" 06107  

PVC 330-X-Closet Bend,Reducing w/Test Cap(HubxSPG)
3" x 4" 06108  

PVC 331 - Vent Ell (Hub x Hub)
1 1/2" 06084, 2" 06085, 3" 06086  

PVC 333 - Vent Ell, Street (Hub x SPG)
1 1/2" 06088, 2" 06089, 3" 06090  

PVC 400 - Sanitary Tee (All Hub)
1 1/4" 05751, 1 1/2" 05752, 2" 05753, 3" 05754   4" 05755, 6" 05756, 8" 05775, 10", 12"  

PVC 401 - Sanitary Tee, Reducing (All Hub)
2" x 1 1/2" x 1 1/2" 05761   2" x 1 1/2" x 2" 05760   2" x 2" x 1 1/2" 05758   3" x 3" x 1 1/2" 05764  
3" x 3" x 2" 05763   4" x 4" x 1 1/2" 05767   4" x 4" x 2" 05765   4" x 4" x 3" 05766  
6" x 6" x 4" 05768   8" x 8" x 4"   8" x 8" x 6"   10" x 10" x 8"  
12" x 12" x 8"   12" x 12" x 10"  

PVC 403 - Sanitary Tee, Street (SPG x Hub x Hub)
1 1/2" 06112, 2" 06113, 3" 06114, 4" 06120  

PVC 404 -Sanitary Tee,Street,Reducing(SPGxHubxHub)
2"x2"x1 1/2" 06117, 3"x3"x1 1/2" 06118, 3"x3"x2" 06119, 4"x4"x2" 06121  

PVC 416 - Sanitary Tee w/Left Side Inlet (All Hub)
3" x 3" x 3" x 1 1/2" 05781   3" x 3" x 3" x 2" 05782   4" x 4" x 4" x 2" 05784  

PVC 417 - Sanitary Tee w/Right Side Inlet(All Hub)
3" x 3" x 3" x 1 1/2" 05795   3" x 3" x 3" x 2" 05796   4" x 4" x 4" x 2" 05797  

PVC 418–Sanitary Tee Right & Left Side Inlet (Hub)
3" x 3" x 3" x 2" x 2" 05811, 4" x 4" x 4" x 2" x 2" 05808  

PVC 428 - Double Sanitary Tee (All Hub)
1 1/2" 05812, 2" 05813, 3" 05814, 4" 05815  

PVC 429 - Double Sanitary Tee, Reducing (All Hub)
2" x 2" x 1 1/2"x1 1/2" 05817   3" x 3"x 1 1/2"x1 1/2" 05818   3" x 3" x 2" x 2" 05820   4" x 4" x 1 1/2" x 1 1/2"  
4" x 4" x 2" x 2" 05240   4" x 4" x 3" x 3" 05821  

PVC 431–Dbl Sanitary Tee, St, Red. SPGxHubxHubxHub
3" x 3" x 1 1/2" x 1 1/2" 06300  

PVC 438 - Dbl Sanitary Tee w/ Side Inlet (All Hub)
3" x 3" x 3" x 3" x 2" 05772, 4" x 4" x 4" x 4" x 2"  

PVC 439 - Dbl San Tee w/ Right & Left Side Inlets
3" x 3" x 3" x 3" x 2" x 2" 05770, 4" x 4" x 4" x 4" x 2" x 2"  

PVC 441 - Vent Tee (All Hub)
1 1/2" 06403, 2" 06404, 3" 06405, 4" 06406, 6", 8"  

PVC 444-X - Cleanout Tee w/ Cleanout Plug(HubxHub)
1 1/2" 05997, 2" 05998, 3" 05999, 4" 06000, 6", 8", 6" x 6" x 4", 8" x 8" x 6"   10" x 10" x 8", 12" x 12" x 6", 12" x 12" x 8"  

PVC 445 - Flush Cleanout Tee (Hub x Hub x FPT)
1 1/2" 06413, 2" 06414, 3" 06415, 4" 06416   6" 06422, 8", 10" x 10" x 8", 12" x 12" x 8"  

PVC 445-X - Flush Tee w/ Cleanout Plug (Hub x Hub)
1 1/2", 2" 05198, 3" 05199, 4" 05200  

PVC 448 - Two-Way Cleanout (All Hub)
3" 05237, 4" 05238  

PVC 449 - Sanitary Tee (All Hub)
2" 05794  

PVC 500 - Double Fixture Fitting (All Hub)
2" 05246, 3" 05249, 2" x 1 1/2" x 1 1/2" x 1 1/2" 05247   2" x 2" x 1 1/2" x 1 1/2" 05244  

PVC 501 – Comb. Wye & 1/8 Bend-One Piece (All Hub)
1 1/2" 05853, 2" 05858, 3" 05852, 4" 05860  

PVC 502 - Comb Wye & 1/8 Bend, Reducer (All Hub)
2" x 1 1/2" x 1 1/2" 05835   2" x 1 1/2" x 2" 05836   2" x 2" x 1 1/2" 05865   3" x 3" x 1 1/2" 05837  
" x 3" x 2" 05857   4" x 4" x 2" 05863   4" x 4" x 3" 05864  

PVC 503 - Combination Wye and 1/8 Bend (H x H x H)
6" x 6" x 6" 05266   8" x 8" x 8" 05273   12" x 12" x 12"  

PVC 504–Comb. Wye & 1/8 Bend Red., Two Piece (Hub)
4” x 4" x 3"   6" x 6" x 3" 05271   6" x 6" x 4" 05267   8" x 8" x 4" 05272  
8" x 8" x 6"   10" x 10" x 4"   10" x 10" x 6"   10" x 10" x 8"  
12" x 12" x 4"   12" x 12" x 6"   12" x 12" x 8"   12" x 12" x 10"  

PVC 507 - Dbl Combination Wye & 1/8 Bend (ALL HUB)
1 1/2", 2", 3" 06032, 4" 06033   2" x 2" x 1 1/2" x 1 1/2" 06034   3" x 3" x 2" x 2" 06035   4" x 4" x 2" x 2" 06036  
4" x 4" x 3" x 3" 06037   6" x 6" x 4" x 4"  

PVC 515 - Comb Wye & 1/8 Bend w/ Left Side Inlet
3" x 3" x 3" x 2" 06009  

PVC 516–Comb. Wye & 1/8 Bend Rgt Side Inlet (Hub)
3" x 3" x 3" x 2" 06008  

PVC 517–Comb. Wye & 1/8 Bend Rgt & Lft Inlet (Hub)
3" x 3" x 3" x 2" x 2"  

PVC 600 - Wye (All Hub)
1 1/4" 05816, 1 1/2" 05822, 2" 05823 3" 05824   4" 05825,6",06135 8" 06139, 10", 12"  

PVC 601 - Wye, Reducing (All Hub)
2" x 1 1/2" x 1 1/2" 05831   2" x 1 1/2" x 2" 05832   2" x 2" x 1 1/2" 05826   " x 3" x 1 1/2" 05827  
3" x 3" x 2" 05828   4" x 4" x 1 1/2" 05833   4" x 4" x 2" 05829   4" x 4" x 3" 05830  
6" x 6" x 3" 06138   6" x 6" x 4" 06137   8" x 8" x 4" 06140   8" x 8" x 6" 05834  
10" x 10" x 4"   10" x 10" x 6"   10" x 10" x 8"   12" x 12" x 4"  
12" x 12" x 6"   12" x 12" x 8"   12" x 12" x 10"  

PVC 602 - Wye, Street (SPG x Hub x Hub)
1 1/2" 06367, 2" 06368, 3" 06369, 4" 06370  

PVC 603 - Wye, Street, Reducing (SPG x Hub x Hub)
3" x 3" x 1 1/2" 06372   3" x 3" x 2" 06373   4" x 4" x 2" 06374   4" x 4" x 3" 06375  

PVC 611 - Double Wye (ALL HUB)
1 1/2" 05838, 2" 05839, 3" 05840, 4",05841 6" 05842  

PVC 611S - Double Wye (ALL HUB)
1 1/2" , 2" , 3" x 3” x 3” x 3” x 2" 05849 , 4", 6"  

PVC 612 - Double Wye, Reducing (ALL HUB)
2" x 2" x 1 1/2" x 1 1/2" 05847   3" x 3" x 1 1/2" x 1 1/2" 05843   3" x 3" x 2" x 2" 05844   4" x 4" x 2" x 2" 05845  
4" x 4" x 3" x 3" 05846   6" x 6" x 4" x 4" 06142  

PVC 700 - Return Bend (Hub x Hub)
1 1/2" 06466, 2" 06467, 3" 06468, 4" 06469  

PVC 703P - Tray Adapter
1 1/2" x 1 1/4"  

PVC 703X - Tray Adapter
1 1/2" x 1 1/4"  

PVC 704P - Tail Piece Adpt.(SxSLIP w/ Plastic Nut)
1 1/2"  

PVC 704X - Tail Piece Adpt. (SxSLIP w/ Chrome Nut)
1 1/2" 05975  

PVC 706-X - P-Trap (Hub x Hub)
1 1/2" 05214, 2" 05222, 3" 05230, 4" 05231  

PVC 707-X - P-Trap with Cleanout (Hub x Hub)
1 1/2" 05223, 2" 05224, 3", 4"  

PVC 708-P - P-Trap (Hub x Hub with Plastic Nut)
1 1/4" 05921, 1 1/2" 05215, 2" 05216  

PVC 708-X - P-Trap (Hub x Hub with Chrome Nut)
1 1/2"  

PVC 709-X - P-Trap w/Cleanout(HubxHubw/Chrome Nut)
1 1/2"  

PVC 711-X - L.A. Pattern P-Trap
1 1/2" 05206  

PVC 711P - L.A. Pattern P-Trap (Slip x Hub)
1 1/2" 05220  

PVC 800 - Closet Flange (Hub)
4" x 3", 4" x 4" 05902  

PVC 800KO - Closet Flange with Knock Out (Hub)
4" x 3" 05254, 4" x 4" 05253  

PVC 800s - Closet Flange with Stop (Hub)
4" x 3" 05903  

PVC 801 - Closet Flange, Reducing (SPIGOT)
4" x 3" 05919  

PVC 810-KO-Closet Flange,Adj w/PlasRing w-KnockOut
4" x 3"  

PVC 811-KO-Closet Flange,Adj w/Metal/Plastic Ring
4" x 3"  

PVC 811–Closet Flange, Adj Metal/Plastics Ring-Hub
4" x 3",05227 ,4" x 4" 05226  

PVC 812-Closet Flange, Adj w/ Metal/Plastic Ring
4" x 3" 05228 (PVC 812P 05252), 4" x 4" 05229 (PVC 812P 05264)  

PVC 815-Flush Closet Flange-fits 3" or 4" (Hub)
4" x 4"/4" x 3" 05255  

PVC 815K-Flush Closet Flange w-Knock Out (Hub)
4" x 3"   4" x 4" 05257  

PVC 820-Offset Flange,Adj
4" x 3" 05920  

PVC 900 - Swivel Tray Plug Adp. w/ Washer(SpgxFPT)
1 1/2"  

PVC 910 - Swivel Tray Plug Adp. w/ Washer (HxFPT)
1 1/2"   

@ A letter after the part number designates the 
  following:
  X - Metal Ring/Plastic Plug
  R - Reducing
  P - Plastic Ring
  W - Washer
** These fitting products may also be represented by the trade names: Charlotte Pipe and
   Foundry Company®, Charlotte Plastics®, Charlotte Pipe®, Charlotte®, Charlotte or Char®.

Fittings@		  
PVC		  
CPF®**		  
ASTM D2949

PVC 1100 - Coupling (Hub x Hub)
3 1/4" 05370  

PVC 1101 - Female Adapter (FPT x Hub)
3" x 3 1/4"  

PVC 1102 - Pipe Increaser-Reducer (Hub x Hub)
1 1/2" x 3 1/4" 05375, 2" x 3 1/4" 05374, 3 1/4" x 4"  

PVC 1105X - Fitting Cleanout Adpt w/ C.O. Plug
3" x 3 1/4" 05398  

PVC 1109 - Male Adapter (MPT x Hub)
3" x 3 1/4" 05372  

PVC 1112 - Reducer Bushing (SPG x Hub)
3 1/4" x 1 1/2" 05384, 3 1/4" x 2" 05383, 4" x 3 1/4" 05379  

PVC 1117 - Adapter Coupling (Hub x Hub)
4" x 3 1/4"  

PVC 1129 - Hub Adapter (SPG x Hub)
3" x 3 1/4" 05382  

PVC 1300 - 1/4 Bend (Hub x Hub)
3 1/4"  

PVC 1302 - 1/4 Bend, Street (SPG x Hub)
3 1/4" 05320  

PVC 1303 - 1/4 Bend with Low Heel Inlet (All Hub)
3 1/4" x 3 1/4" x 2"  

PVC 1321 - 1/8 Bend (Hub x Hub)
3 1/4" 05341  

PVC 1323 - 1/8 Bend, Street (SPG x Hub)
3 1/4" 05346  

PVC 1400 - Sanitary Tee (All Hub)
3 1/4" 05350  

PVC 1401 - Sanitary Tee, Reducing (All Hub)
3 1/4" x 3 1/4" x 1 1/2", 3 1/4" x 3 1/4" x 2"  

PVC 1429 - Double Sanitary Tee, Reducing (All Hub)
3 1/4" x 3 1/4" x 1 1/2" x 1 1/2"  

PVC 1600 - Wye (All Hub)
3 1/4" 05390  

PVC 1601 - Wye, Reducing (All Hub)
3 1/4" x 3 1/4" x 1 1/2" 05392, 3 1/4" x 3 1/4" x 2" 05391  

PVC 1611 - Double Wye (All Hub)
3 1/4"  

PVC 1800 - Closet Flange (Hub)
4" x 3 1/4" 05395  

PVC 1800KO - Closet Flange (Hub)
4" x 3 1/4" 05396  

PVC 1811 - Closet Flange, Adj {w/ Metal Ring}(Hub)
4" x 3 1/4" 05397  

PVC 1812 - Closet Flange (SPG)
4" x 3 1/4"   

@ A letter after the part number designates the 
  following:
  X - Metal Ring/Plastic Plug
  R - Reducing
  P - Plastic Ring
  W - Washer
** These fitting products may also be represented by the trade names: Charlotte Pipe and
   Foundry Company®, Charlotte Plastics®, Charlotte Pipe®, Charlotte®, Charlotte or Char®.

Fittings@		  
ABS		  
CPF®**		  
ASTM D2661

ABS 100 - Coupling (Hub x Hub)
1 1/2" 02933, 2" 02934, 3" 02935, 4" 02936, 6" 03143, 8", 10", 12"  

ABS 101- Female Adapter (Hub x FTP)
1 1/2" 02866, 2" 02867, 3" 02869, 4", 033966" 03147  

ABS 102 - Pipe Increaser - Reducer (Hub x Hub)
1 1/2" x 2" 02948, 1 1/2" x 3",02949 2" x 3" 02950   2" x 4" 02951, 3" x 4", 3" x 4" 02952  

ABS 103 - Trap Adapter-Male (SPG x SLIP)
1 1/2"   2"   1 1/2" x 1 1/4"  

ABS 103P - Trap Adapter-Male (SPG x SLIP)
1 1/2" 03393   2"   1/2" x 1 1/4" 03379  

ABS 103R - Trap Adapter-Male (SPG x SLIP)
1 1/2" 03389   1 1/2" x 1 1/4"   2"  

ABS 103W - Trap Adapter-Male (SPG x SLIP)
1 1/2" 03410   1 1/2" x 1 1/4" 03409   2" 03390  

ABS 103X - Trap Adapter-Male (SPG x SLIP)
1 1/2" 03392   1 1/2" x 1 1/4" 03378   2"  

ABS 104 - Trap Adapter-Female (Hub x Slip)
1 1/2" x 1 1/4", 1 1/2"  

ABS 104P - Trap Adapter-Female (Hub x Slip)
1 1/2" x 1 1/4" 03395, 1 1/2" 03377  

ABS 104R - Trap Adapter-Female (Hub x Slip)
1 1/2" x 1 1/4", 1 1/2" 03399  

ABS 104W - Trap Adapter-Female (Hub x Slip)
1 1/2" x 1 1/4" 03384, 1 ½" 03383  

ABS 104X - Trap Adapter-Female (Hub x Slip)
1 1/2" x 1 1/4" 03394, 1 1/2" 03376  

ABS 105 - Fitting Cleanout Adapter (SPG x FPT)
1 1/2" 02922, 2" 02923, 3" 02924, 4" 02925  

ABS 105x - Fitting Cleanout Adapter w/C.O. Plug
1 1/2" 03001, 2" 03002, 3" 03003, 4" 03004  

ABS 106 - Cleanout Plug (MPT)
1 1/2" 02938, 2" 02939, 2 1/2" 02940, 3" 02941   3 1/2" 02943, 4" 02942, 6" 03146, 8"  

ABS 107 - Flush Bushing (SPG x Hub)
1 1/2" x 1 1/4" 02904   2" x 1 1/4" 02905   2" x 1 1/2" 02906   3" x 1 1/2" 02907  
3" x 2" 02908, 4" x 2" 02910   4" x 3" 02909, 6" x 4" 03144  

ABS 108 - Flush Bushing(Cleanout Adapter)(HubxFPT)
2" x 1 1/2" 02913   6" x 4"   6" x 8"  

ABS 109–Male Adptr- not accept tail pc (MPT x Hub)
1 1/2" 02927, 2" 02928, 3" 02929, 4" 02930  

ABS 110 - Flush C.O. Plug (MPT)
2" 03017, 3" 03038, 4" 03015  

ABS 111- Male Fitting Adapter (SPG x MPT)
1 1/2" 03386  

ABS 114 - Threaded Cap (FPT)
1 1/2" 02993  

ABS 116 - Cap (Socket)
1 1/2" 02977, 2" 02978, 3" 02979, 4" 02980  

ABS 117 - Adapter Coupling (Hub x Hub)
4" x 3" 02962  

ABS 118 - Adapter Bushing (DWV SPG x Hub)
3" 02990, 4" 02991  

ABS 119 - No-Hub Adapter (SPG x Hub)
1 1/2", 2" 02954, 3" 02955, 402956, 4" x 3"  

ABS 122 - Spigot Adapter, Cast iron (Hub x Hub)
2" x 2", 4" x 4"  

ABS 123 - Hub Adapter, Cast Iron (Hub x SPG)[1]
2" x 2" 02957  

ABS 123R -Hub Adapter,Cast Iron,Increaser(HubxSPG)
1 1/2" x 2", 3" x 4" 02960  

ABS 130 - Repair Coupling (Hub x Hub)
1 1/2" 02965, 2" 02966, 3" 02967, 4" 02968, 6"  

ABS 131 - Test Cap
1 1/2" 02411, 2" 02412, 3" 02413, 4" 02414  

ABS 300 - 90° Elbows 1/4 Bend (Hub x Hub)
1 1/2" 02876, 2" 02877, 3" 02878, 4" 02879 6" 03130  

ABS 300R - 90° Elbows 1/4 Bend, Reducing (HubxHub)
2" x 1 1/2" 03092  

ABS 302 - 90° Elbows 1/4 Bend, Street (SPG x Hub)
1 1/2" 02880, 2" 02881, 3" 02882, 4" 02883  

ABS 303 - 90° Elbow 1/4 Bend w/Low Heel Inlet(Hub)
3 x 3 x 1 1/2" 03041, 3" x 3" x 2" 03042  

ABS 304 - 90° Elbows Long Sweep 1/4 Bend (HubxHub)
1 1/2" 02871, 2" 02872, 3" 02873, 4" 02874  

ABS 305 - 90° Elbow Long Sweep ¼Bend w/ Inlet(Hub)
3" x 3" x 2" 03027  

ABS 307 - 90° Elbow Long Sweep ¼Bend w/Inlet(Hub)
3" x 3" x 2" 03024  

ABS 309-90° Elbow Long Sweep ¼Bend,Street(HubxSPG)
1 1/2" 03060, 2",03061 3" 03063  

ABS 310–90° Elbow ¼ Bend LowHeelInlet HubxSPG xHub
3" x 3" x 2" 03026  

ABS 311–90° Elbow Long Swp ¼ Bend Side Inlet (Hub)
3" x 3" x 2" 03050  

ABS 319 - 60° Elbow 1/6 Bend (Hub x Hub)
1 1/2" 02895, 2" 02896, 3" 02897, 4" 02982  

ABS 320 - 60º Elbow 1/6 Bend, Street (SPG x Hub)
1 1/2" 03020, 2" 03021, 3" 03022  

ABS 321 - 45° Elbows 1/8 Bend (Hub x Hub)
1 1/2" 02885, 2" 02886, 3" 02887, 4" 02888, 6" 03132  

ABS 323 - 45º Elbows 1/8 Bend, Street (SPG x Hub)
1 1/2" 02890, 2" 02891, 3" 02892, 4" 02893, 6" 03133  

ABS 324 - 22 1/2° Elbow 1/16 Bend (Hub x Hub)
1 1/2" 02899, 2" 02900, 3" 02901, 4" 02983, 6" 02988  

ABS 326 - 22 1/2° Elbow 1/16 Bend Street (SPGxHub)
1 1/2" 02984, 202985", 3" 02986, 4" 02987  

ABS 327 - 90° Elbows Double 1/4 bend (ALL HUB)
1 1/2" 03045, 2" 03046, 3" 03047, 2" x 1 1/2" x 1 1/2" 03049  

ABS 329 - Closet Bend, Reducing (Hub x Hub)
3" x 4" 03093  

ABS 330 - Closet Bend, Reducing (Hub x SPG)
3" x 4" 03107  

ABS 330x-Closet Bend Reducing w/ Test Cap(HubxSPG)
3" x 4" 03108  

ABS 331 - Vent Ell (Hub x Hub)
1 1/2" 03084, 2" 03085, 3" 03086  

ABS 333 - Vent Ell, Street (Hub x SPG)
1 1/2" 03088, 2" 03089  

ABS 400 - Sanitary Tee (ALL HUB)
1 1/2" 02752, 2" 02753, 3" 02754, 4" 02755, 6" 02756  

ABS 401 - Sanitary Tee, Reducing (All Hub)
2" x1 1/2" x 1 1/2" 02761   2" x 1 1/2" x 2" 02760   2" x 2" x 1 1/2" 02758   3" x 3" x 1 1/2" 02764  
3" x 3" x 2" 02763   4" x 4 "x 2" 02765   4" x 4" x 3" 02766   6" x 6" x 4" 02768  

ABS 403 - Sanitary Tee, Street (SPG x Hub x Hub)
1 1/2" 03112, 2" 03113, 3",03114 4" 03120  

ABS 404 -Sanitary Tee,Street,Reducing(SPGxHubxHub)
2" x 1 1/2" x 1 1/2" 03115   2" x 1 1/2" x 2" 03116   2" x 2" x 1 1/2" 03117   3" x 3" x 1 1/2" 03118  
3" x 3" x 2" 03119  

ABS 416 - Sanitary Tee with Left Side Inlet (Hub)
3"x 3" x 3" x 2" 02782  

ABS 417 – Sanitary Tee w/Right Side Inlet(All Hub)
3" x 3" x 3" x 1 1/2" 02795   3" x 3" x 3" x 2" 02796  

ABS 418 - Sanitary Tee w/R & L Side Inlet (Hub)
3" x 3" x 3" x 2" x 2" 02811   4" x 4" x 4" x 2" x 2"  

ABS 428 - Double Sanitary Tee (All Hub)
1 1/2" 02812, 2" 02813, 3" 02814, 4" 02815  

ABS 429 - Double Sanitary Tee, Reducing (All Hub)
2" x 2" x 1 1/2" x 1 1/2" 02817   3" x 3" x 1 1/2" x 1 1/2" 02818   3" x 3" x 2" x 2" 02820   4" x 4" x 2" x 2" 02240  
4" x 4" x 3" x 3" 02821  

ABS 438 - Dbl Sanitary Tee w/Side Inlet (Hub)
3" x 3" x 3" x 3" x 2" 02772   4" x 4" x 4" x 4" x 2"  

ABS 439 - Dbl Sanitary Tee w/R&LSide Inlets (Hub)
3" x 3" x 3" x 3" x 2" x 2" 02770   4" x 4" x 4" x 4" x 2" x 2"  

ABS 441 - Vent Tee (All Hub)
1 1/2" 03403, 2" 03404, 3" 03405  

ABS 444x - Cleanout Tee w/ Cleanout Plug (HubxHub)
1 1/2" 02997, 2" 02998, 3" 02999, 4" 03000, 6"  

ABS 445 - Flush Cleanout Tee (Hub x Hub x FPT)
1 1/2" 03413, 2" 03414, 3" 03415, 4" 03416, 6"  

ABS 447 - Horizontal Twin Tee (All Hub)
3" x 3" x 1 1/2" x 1 1/2"  

ABS 448 - Two-Way Cleanout (All Hub)
3" 02237, 4" 02238  

ABS 500 - Double Fixture Fitting (All Hub)
2" 02246, 3" 02249   2" x 1 1/2" x 1 1/2" x 1 1/2" 02247   2" x 1 1/2" x 2" x 2" 02248   2" x 2" x 1 1/2" x 1 1/2" 02244  
3" x 2" x 3" x 3" 02250  

ABS 501 - Comb Wye and 1/8 Bend (All Hub)
1 1/2" 02853, 2" 02858, 3" 02852, 4" 02860  

ABS 502-Comb Wye & 1/8 Bend, Reducing One Pc.(Hub)
2" x 1 1/2" x 1 1/2" 02835   2" x 1 1/2" x 2" 02836   2" x 2" x 1 1/2" 02865   3" x 3" x 1 1/2" 02837  
3" x 3" x 2" 02857   4" x 4" x 2" 02863   4" x 4" x 3" 02864  

ABS 600 - Wye (ALL HUB)
1 1/2" 02822, 2" 028233" 02824,4" 02825,6" 03135  

ABS 601 - Wye, Reducing (All Hub)
2" x 1 1/2" x 1 1/2" 02831   2" x 1 1/2" x 2" 02832   2" x 2" x 1 1/2" 02826   3" x 3" x 1 1/2" 02827  
3" x 3" x 2" 02828   4" x 4" x 1 1/2" 02833   4" x 4" x 2" 02829   4" x 4" x 3" 02830  
6" x 6" x 4" 03137  

ABS 602 - Wye, Street (SPG x Hub x Hub)
2" 03368, 3" 03369  

ABS 603 - Wye, Street, Reducing (SPG x Hub x Hub)
3" x 3" x 1 1/2" 03372   3" x 3" x 2" 03373  

ABS 611 - Double Wye (All Hub)
1 1/2" 02838, 202839, 302840, 4" 02841  

ABS 612 - Double Wye, Reducing (All Hub)
2" x 2" x 1 1/2" x 1 1/2" 02847   3" x 3" x 1 1/2" x 1 1/2" 02843   3" x 3" x 2" x 2" 02844   4" x 4" x 3" x 3" 02846  

ABS 700 - Return Bend (Hub x Hub)
1 1/2" 03466, 2" 03467, 3" 03468, 4" 03469  

ABS 704 - Tail Piece Adapter (SPG x Slip)
1 1/2"  

ABS 704P-Tail Piece Adapter(SPGxSlip)w/Plastic Nut
1 1/2" 02975  

ABS 706x - P-Trap (Hub x Hub)
1 1/2" 02214, 2" 02222, 3" 02230, 4" 02231  

ABS 707x - P-Trap with Cleanout (Hub x Hub)
1 1/2" 02223, 2" 02224  

ABS 708P - P-Trap (Hub x Hub with Plastic Nut)
1 1/2" 02215, 2" 02216  

ABS 708x - P-Trap (Hub x Hub with Chrome Nut)
1 1/2"  

ABS 711P - L.A. Pattern P-Trap (Slip x Hub)[3]
1 1/2" 02221  

ABS 711x-L.A. Pattern P-Trap Plstc Nut (SlipxHub)[3]
1 1/2"  

ABS 800 - Closet Flange (Hub)
4" x 3", 4" x 4" 02902  

ABS 800Ko - Closet Flange with Knock Out (Hub)
4" x 3" 02254  

ABS 800S - Closet Flange with Stop (Hub)
4" x 3" 02903  

ABS 801 - Closet Flange, Reducing (SPG)
4" x 3" 02919  

ABS 811-KO-Closet Flange, Adj w/Meta/Plasticl Ring
4" x 3"  

ABS 811P–Closet Flange, Adj Metal/Plstc Ring (Hub)
4" x 3" 02251, 4" x 4" 02256  

ABS 811–Closet Flange, Adj Metal/Plstc Ring (Hub)
4" x 3" 02227, 4" x 4" 02226  

ABS 812-Closet Flange, Adj
4"x3" 02228, 4"x4" 02229  

ABS 812P-Closet Flange, Adj
4" x 3" 02252, 4" x 4"  

ABS 815 - Flush Closet Flange
4"x4"/4"x3" 02255  

ABS 815Ko - Flush Closet Flange with Knockout[2]
4"x4"/4"x3" 02257  

ABS 820-Offset Flange, Adj
4" x 3" 02920  

ABS 820P-Offset Flange, Adj
4" x 3" 03040  

ABS 824-Closet Flange, Adjust. w/Metal Ring
4" 02210  

ABS 900-Swivel Tray Plug Adapter w/Washer(SPGxFPT)
1 1/2" 03418  

ABS 910-Swivel Tray Plug Adapter w/Washer(SPGxFPT)
1 1/2"   

[1] Plain End: Joint can be made with compression gasket only.

[3] Furnished with 1 1/2 and 1 1/2 x 1 1/4 Polyethylene nut/washer combination.

[2] Fits Over 3" Pipe or Inside 4" Pipe.

@ A letter after the part number designates the 
  following:
  X - Metal Ring/Plastic Plug
  R - Reducing
  P - Plastic Ring
  W - Washer
** These fitting products may also be represented by the trade names: Charlotte Pipe and
   Foundry Company®, Charlotte Plastics®, Charlotte Pipe®, Charlotte®, Charlotte or Char®.

Number of matching Manufacturers is 1
Number of matching Products is 414
Processing time was 0 seconds