NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, January 15, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?Company=C0302564&Standard=0MP&

Did you know?

The new NSF Product Listings website is available for NSF/ANSI 14-Certified products with a new look and feel. Click on "Try it Now" to check it out!
MP
Mechanical Plumbing Products


 
Perlick Corp. 
8300 West Good Hope Road
Milwaukee, WI 53223 
United States 
414-353-7060
Visit this company's website

Facility : Milwaukee, WI

Product Type   Material Type   Trade Name   Product Standard

Sinks¢ § [1]		  
MLTPL		  
Underbar Sinks		  
ASME A112.19.3/CSA B45.4

Bar Sink[2]
TS(1)DS   TS(1)PS-(2)   TSF(1)DS   TSF(1)PS-(2)  

Cocktail Station Prep Sink[3]
TSCE(3)PS(4)   TSCE(3)PSTC(4)  

Shelf Workboard - Modular Blender Station
TS(1)(2)(3)-(4)[4]   TS12BLD[3]   TS12BLW[3]   TS14BLW[3]  
TS14BW[3]   TS18BLD[3]   TS18BLW[3]   TSD12BLD[3]  
TSD12BLW[3]   TSD14BLW[3]   TSD14BW[3]   TSD18BLD[3]  
TSD18BLW[3]   TSF12BLD[3]   TSF12BLW[3]   TSF14BLW[3]  
TSF14BW[3]   TSF18BLD[3]   TSF18BLW[3]   TSS12BLD[3]  
TSS12BLW[3]   TSS14BLW[3]   TSS14BW[3]   TSS18BLD[3]  
TSS18BLW[3]  

Shelf Workboard - Modular Oversized Tanks
TS(1)(2)(3)-EC[5]   TS181CA[3]   TS362CA[3]   TS543CA[3]  
TS724CA[3]   TSD181CA[3]   TSD362CA[3]   TSD543CA[3]  
TSD724CA[3]   TSF181CA[3]   TSF362CA[3]   TSF543CA[3]  
TSF724CA[3]   TSS181CA[3]   TSS362CA[3]   TSS543CA[3]  
TSS724CA[3]  

Storage Cabinets with Sink
7057-1   7057-3   SC(3)W(5)[3]   TS(1)(3)[3]  
TSF(1)(3)[3]  

Top Shelf Workboard - Modular Sink
TS(1)(2)(3)-(4)[4]   TS12HS   TS12HSN   TS18HSN  
TS18HST   TS22(1)[3]   TS33(1)[3]   TS43(1)(2)[3]  
TS44(1)[3]   TS53(1)(2)[3]   TS63(1)(2)[3]   TS64(1)(2)[3]  
TS73(1)(2)[3]   TS74(1)(2)[3]   TS83(1)(2)[3]   TS84(1)(2)[3]  
TS94(1)(2)[3]   TSD12HS   TSD12HSN   TSD18HSN  
TSD18HST   TSD22(1)[3]   TSD33(1)[3]   TSD43(1)(2)[3]  
TSD44(1)[3]   TSD53(1)(2)[3]   TSD63(1)(2)[3]   TSD64(1)(2)[3]  
TSD73(1)(2)[3]   TSD74(1)(2)[3]   TSD83(1)(2)[3]   TSD84(1)(2)[3]  
TSD94(1)(2)[3]   TSF12HS   TSF12HSN   TSF18HSN  
TSF18HST   TSF22(1)[3]   TSF33(1)[3]   TSF43(1)(2)[3]  
TSF44(1)[3]   TSF53(1)(2)[3]   TSF63(1)(2)[3]   TSF64(1)(2)[3]  
TSF73(1)(2)[3]   TSF74(1)(2)[3]   TSF83(1)(2)[3]   TSF84(1)(2)[3]  
TSF94(1)(2)[3]   TSS12HS   TSS12HSN   TSS18HSN  
TSS18HST   TSS22(1)   TSS33(1)[3]   TSS43(1)(2)[3]  
TSS44(1)[3]   TSS53(1)(2)[3]   TSS63(1)(2)[3]   TSS64(1)(2)[3]  
TSS73(1)(2)[3]   TSS74(1)(2)[3]   TSS83(1)(2)[3]   TSS84(1)(2)[3]  
TSS94(1)(2)[3]   

[2] (1) With additional numbers to indicate length in inches (6" or 36")
    (2) With or without additional characters indicate
        No Letter - Flat Front
        P - Prep
        B - Cutting Board
        R - Rinser
        T - Tool Caddy
        S - Sink
        D - Dump (Bar Sink)

[3] (1) With or without additional characters "C", "L" or "R"							
          C - Feature located center (such as sink location)							
          L - Feature located left (such as sink location, door hinging, etc.)							
          R - Feature located right (such as sink location, door hinging, etc.)							
    (2) May be constructed with integral drainboard or by alternate construction of attached
    
          dish table which is mechanically fastened and sealed to the sink.
    (3) With additional numbers to indicate length in inches
    (4) With or without additional characters indicate							
        No letter – Flat Front							
        RC – Recessed Cubby							
    (5) A - Models designed for optional Dual Point Locking Door
    (6) With or without additional characters "CM", or "DS-TR" 
          CM - Chemical Storage
          DS-TR - Dump Sink with Trash Receptacle 

[3] (1) With or without additional characters "C", "L" or "R"							
          C - Feature located center (such as sink location)							
          L - Feature located left (such as sink location, door hinging, etc.)							
          R - Feature located right (such as sink location, door hinging, etc.)							
    (2) May be constructed with integral drainboard or by alternate construction of attached
    
          dish table which is mechanically fastened and sealed to the sink.
    (3) With additional numbers to indicate length in inches
    (4) With or without additional characters indicate							
        No letter – Flat Front							
        RC – Recessed Cubby							
    (5) A - Models designed for optional Dual Point Locking Door
    (6) With or without additional characters "CM", or "DS-TR" 
          CM - Chemical Storage
          DS-TR - Dump Sink with Trash Receptacle 
[4] (1) No suffix indicates depth of 18-9/16" (Top Shelf Depth). Additional optional
    suffixes 
        indicate depths of:				
        F  - 24" (Full Depth)				
        C  - 17" (Cocktail Depth)				
        CE - 27-9/16"  (Cocktail Extended Depth)				
        S  - 18-9/16" or 24" without backsplash (Service Station)				
    (2) Numerical suffix indicates width in inches.     				
    (3) Alpha suffix indicates the style				
        HS - Hand Sink
        CS - Combination Sink				
        DS - Dump Sink
        M2 - Multi-Tank Sink with 2 sink bowls
        M3 - Multi-Tank Sink with 3 sink bowls
        M4 - Multi-Tank Sink with 4 sink bowls
        BS - Blender Station
    (4) Models may have additional suffix letters to indicate additional features
        DB  - Drainboard both sides
        DBL - Drainboard Left 
        DBR - Drainboard Right
        DD  - Drop Down Drainboard
        TR  - With Trash Chute
        RS  - With Rinser
    

[3] (1) With or without additional characters "C", "L" or "R"							
          C - Feature located center (such as sink location)							
          L - Feature located left (such as sink location, door hinging, etc.)							
          R - Feature located right (such as sink location, door hinging, etc.)							
    (2) May be constructed with integral drainboard or by alternate construction of attached
    
          dish table which is mechanically fastened and sealed to the sink.
    (3) With additional numbers to indicate length in inches
    (4) With or without additional characters indicate							
        No letter – Flat Front							
        RC – Recessed Cubby							
    (5) A - Models designed for optional Dual Point Locking Door
    (6) With or without additional characters "CM", or "DS-TR" 
          CM - Chemical Storage
          DS-TR - Dump Sink with Trash Receptacle 
[5] (1) No suffix indicates depth of 18-9/16" (Top Shelf Depth). Additional optional
    suffixes 
        indicate depths of:
        F  - 24" (Full Depth)
        C  - 17" (Cocktail Depth)
        CE - 27-9/16"  (Cocktail Extended Depth)
        S  - 18-9/16" or 24" with no backsplash (Service Station)
    (2) Numerical suffix indicates width in inches.
    (3) Alpha suffix indicates the style:
        M1 - Single Tank
        M2 - Multi-Tank Sink with 2 sink bowls
        M3 - Multi-Tank Sink with 3 sink bowls
        M4 - Multi-Tank Sink with 4 sink bowls

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Accessory faucet may or may not be installed at the factory. All faucets installed by
    the factory are NSF/cNSF Listed.

Number of matching Manufacturers is 1
Number of matching Products is 118
Processing time was 0 seconds