NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, January 15, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?Company=C0307955&Standard=014&

Did you know?

The new NSF Product Listings website is available for NSF/ANSI 14-Certified products with a new look and feel. Click on "Try it Now" to check it out!

NSF/ANSI 14
Plastics Piping System Components and Related Materials


Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document



 
Waterline Products Co. Limited 
100 Westcreek Blvd, Unit 2
Brampton, ON L6T 5V7 
Canada 
+1 905 453 2400

Facility : # 1 China

Surface Burning Characteristics of Building Materials

Product Type   Material Type   Trade Name   Product Standard

Tubing$ &
 
PEX
 
Waterline PEX
 
CAN/ULC S102.2

3/8", 1/2" - 2"
Flame Spread Rating <= 25   Smoke Developed Classification <= 50  

$ Certified for blue, natural, red, and white without oxygen barrier.
& 3/8" tubing (without insulation) shall be marked [cNSF®-fs ULc S102.2 FS <=25/SD <=50].
  1/2" - 2" tubing (with insulation), Flame Spread Index and Smoke Developed Index
  based on when the tubing is field insulated with JM Microlok HP Hi Performance
  Fiberglass insulation as per the pipe manufacturer's installation instructions. Tubing
  shall be Marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50].

Tubing# $ *
 
PEX
 
Waterline PEX
 
ASTM E84

3/8", 1/2" - 2"
Flame Spread Index <= 25   Smoke Developed Index <= 50  

# The Flame Spread Index and Smoke Developed Index for 1/2"-2" tubing are based on when
  tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation
  as per RIFENG installation instructions. The 3/8" tubing is not insulated.
$ Certified for blue, natural, red, and white without oxygen barrier.
* Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches
  between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50].


Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings[1]
 
PEX
 
Waterline
 
ASTM F1960

PEX Ring with Stop
3/8" - 2"  

[1] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5. This is a non wetted
    product.

Fittings[1]
 
PEX
 
Waterline
 
CSA B137.5

PEX Ring with Stop
3/8" - 2"  

[1] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5. This is a non wetted
    product.

Tubing$ * ^ § +++ [2] [G]
 
PEX5106
 
Waterline PEX
 
ASTM F876/F877
>=1/8" SDR 9

$ Certified for blue, natural, red, and white without oxygen barrier.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[2] Certified for red and white PEX 5106 monowall pipe.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Tubing$ * ^ ¢ § +++ [2] [G]
 
PEX5106
 
Waterline PEX
 
CSA B137.5
>=1/8" SDR 9

$ Certified for blue, natural, red, and white without oxygen barrier.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[2] Certified for red and white PEX 5106 monowall pipe.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.


Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

Fittings[1]
 
PEX
 
Waterline
 
ASTM F1960

PEX Ring with Stop
3/8" - 2"  

[1] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5. This is a non wetted
    product.

Fittings[1]
 
PEX
 
Waterline
 
CSA B137.5

PEX Ring with Stop
3/8" - 2"  

[1] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5. This is a non wetted
    product.

Tubing$ * § [2]
 
PEX5106
 
Waterline PEX
 
ASTM F876/F877
>=1/8" SDR 9

$ Certified for natural, orange, red, and white with oxygen barrier.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[2] Certified for red and white PEX 5106 monowall pipe.

Tubing$ * ¢ § [2]
 
PEX5106
 
Waterline PEX
 
CSA B137.5
>=1/8" SDR 9

$ Certified for natural, orange, red, and white with oxygen barrier.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[2] Certified for red and white PEX 5106 monowall pipe.


Number of matching Manufacturers is 1
Number of matching Products is 12
Processing time was 0 seconds