NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, January 15, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?Company=C0388013&Standard=0MP&

Did you know?

The new NSF Product Listings website is available for NSF/ANSI 14-Certified products with a new look and feel. Click on "Try it Now" to check it out!
MP
Mechanical Plumbing Products


 
Il Flessibile Di Nicastri & C. Srl 
Via F. Vedani 16
28045 Invorio (NO) 
Italy 
39 32 225 5686
Visit this company's website

Facility : Invorio (NO), Italy

Product Type   Material Type   Trade Name   Product Standard

Hose¢ § Þ		  
MLTPL		  
Il Flessibile		  
ASME A112.18.1/CSA B125.1
FXA2AX.AABB.CCCC.DDD[1] [2]

FXW2CX.AABB.CCCC.DDD[2] [3] 

[1] FXA2AX TRADE NAME EXPLANATION
    FX: DOUBLE CLAMPING HOSE
    A: INTERNAL TUBE TYPE [PVC]
    2: BRASS RUBBER HOLDERS
    A: ASME A112.18.1 approval
[2] X – CONNECTION COMBINATION (All Sizes have ISO 228 - G Connections)
    A: 1/2 F X 1/2 F
    B: 1/2 F X 15X1M
    E: 1/2 F X 15X1F
    F: 1/2 F X 3/8 M
    H: 1/2 F X 3/8 F
    AA – DIAMETER AND TYPE OF RAW MATERIAL FOR EXTERNAL NUT ON FITTING [DIAMETERS – 12mm, 14
    mm, 15 mm, 17 mm]
    AC: Brass CW508L 022 External diameter 14
    AD: Brass CW508L 026 External diameter 14
    AQ: Brass CW508L 022 External diameter 15
    AR: Brass CW508L 026 External diameter 15
    AV: Brass CW508L 022 External diameter 17
    AW: Brass CW508L 026 External diameter 17
    AF: INOX AISI 304 External diameter 14
    AS: INOX AISI 304 External diameter 15
    AX: INOX AISI 304 External diameter 17
    AJ: Brass CW 508L 022 External diameter 12
    BB – EXTERNAL FINISH
    CR: Chromed
    CZ: Brushed Chrome
    NS: Brushed nickel
    NZ: Brushed Nickel Phosphor
    IG: Raw INOX
    IS: Brushed INOX
    PO: PVD gold
    PA: PVD gold brushed
    PG: PVD black metal
    PB: PVD black metal brushed
    PH: PVD champagne brushed
    PR: PVD copper bronze
    PE: PVD copper bronze brushed
    PI: PVD grey 07 brushed
    PK: PVD high brass
    PQ: PVD high brass brushed
    PM: PVD pale gold brushed
    PC: PVD rose gold
    CCCC: Fitting Types 1 and 2 (any combination of (2) alphanumeric characters denoting
    external unwetted fitting)
    DDD - LENGTH
    050 = 500 mm (minimum length)
    200 = 2000mm (maximum length)
    Note: External Finishes (where BB = PO, PA, PG, PB, PH, PR, PE, PI, PK, PQ, PM, PC) have
    a maximum length of 150 (1500 mm).

[2] X – CONNECTION COMBINATION (All Sizes have ISO 228 - G Connections)
    A: 1/2 F X 1/2 F
    B: 1/2 F X 15X1M
    E: 1/2 F X 15X1F
    F: 1/2 F X 3/8 M
    H: 1/2 F X 3/8 F
    AA – DIAMETER AND TYPE OF RAW MATERIAL FOR EXTERNAL NUT ON FITTING [DIAMETERS – 12mm, 14
    mm, 15 mm, 17 mm]
    AC: Brass CW508L 022 External diameter 14
    AD: Brass CW508L 026 External diameter 14
    AQ: Brass CW508L 022 External diameter 15
    AR: Brass CW508L 026 External diameter 15
    AV: Brass CW508L 022 External diameter 17
    AW: Brass CW508L 026 External diameter 17
    AF: INOX AISI 304 External diameter 14
    AS: INOX AISI 304 External diameter 15
    AX: INOX AISI 304 External diameter 17
    AJ: Brass CW 508L 022 External diameter 12
    BB – EXTERNAL FINISH
    CR: Chromed
    CZ: Brushed Chrome
    NS: Brushed nickel
    NZ: Brushed Nickel Phosphor
    IG: Raw INOX
    IS: Brushed INOX
    PO: PVD gold
    PA: PVD gold brushed
    PG: PVD black metal
    PB: PVD black metal brushed
    PH: PVD champagne brushed
    PR: PVD copper bronze
    PE: PVD copper bronze brushed
    PI: PVD grey 07 brushed
    PK: PVD high brass
    PQ: PVD high brass brushed
    PM: PVD pale gold brushed
    PC: PVD rose gold
    CCCC: Fitting Types 1 and 2 (any combination of (2) alphanumeric characters denoting
    external unwetted fitting)
    DDD - LENGTH
    050 = 500 mm (minimum length)
    200 = 2000mm (maximum length)
    Note: External Finishes (where BB = PO, PA, PG, PB, PH, PR, PE, PI, PK, PQ, PM, PC) have
    a maximum length of 150 (1500 mm).
[3] FXW2CX TRADE NAME EXPLANATION
    FX: DOUBLE CLAMPING HOSE
    W: INTERNAL TUBE TYPE [PEX]
    2: BRASS RUBBER HOLDERS
    C: NSF 61 and ASME A112.18.1 approval

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
Þ Product is Certified to the International Plumbing Code. Installation in accordance with
  the manufacturer's instructions and the requirements of the latest edition of the
  International Plumbing Code.

Number of matching Manufacturers is 1
Number of matching Products is 2
Processing time was 0 seconds