NSF Product and Service Listings
These NSF Official Listings are current as of Thursday, January 15, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?Company=C0670279&Standard=014&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| The Mosack Group, Inc. | |
| 11210 Allen Station Drive | |
| Mint Hill, NC 28227 | |
| United States | |
| 888-229-2874 |
Facility : Mint Hill, NC
Surface Burning Characteristics of Building Materials
| Product Type | Material Type | Trade Name | Product Standard | |||
Tubing^ § ** |
PEX |
Apollo |
ASTM E84 |
|||
| 1/2", 3/4" | ||||||
^ Flame Spread Index <= 25, Smoke Developed Index <=50 § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ** Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. |
||||||
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Tubing! * ^ ~ ¢ § ++ [G] |
PEX 5106/5306 |
Apollo |
ASTM F876/F877 |
|||
| 3/8" - 2" | ||||||
! Certified for blue, natural, red colors.
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Pipe may have a blue, red or white coating.
~ Pipe may utilize blue, red, or black colored ink on the printline.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Tubing! * ^ ~ ¢ § ++ [1] [G] |
PEX 5106/5306 |
Apollo |
CSA B137.5 |
|||
| 3/8" - 2" | ||||||
! Certified for blue, natural, red colors.
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Pipe may have a blue, red or white coating.
~ Pipe may utilize blue, red, or black colored ink on the printline.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[1] Tubing certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
marked, as applicable, with the following fitting system designation(s): ASTM F877, ASTM
F2159, ASTM F1807, ASTM F1960, ASTM F2098, and ASSE 1061.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Tubing* ¢ § +++ [1] [2] [G] |
PEX 5306 |
Apollo |
ASTM F876/F877 |
|||
| 3/8" - 1" | ||||||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[1] Tubing certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
marked, as applicable, with the following fitting system designation(s): ASTM F877, ASTM
F2159, ASTM F1807, ASTM F1960, ASTM F2098, and ASSE 1061.
[2] Certified for Red, Blue and White Colors.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Tubing* ¢ § +++ [1] [2] [G] |
PEX 5306 |
Apollo |
CSA B137.5 |
|||
| 3/8" - 1" | ||||||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[1] Tubing certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
marked, as applicable, with the following fitting system designation(s): ASTM F877, ASTM
F2159, ASTM F1807, ASTM F1960, ASTM F2098, and ASSE 1061.
[2] Certified for Red, Blue and White Colors.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Tubing* ¢ § +++ [1] [2] [G] |
PEX 5306 |
Apollo |
AWWA C904 |
|||
| 3/8" - 1" | ||||||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[1] Tubing certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
marked, as applicable, with the following fitting system designation(s): ASTM F877, ASTM
F2159, ASTM F1807, ASTM F1960, ASTM F2098, and ASSE 1061.
[2] Certified for Red, Blue and White Colors.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Facility : Calgary, Alberta, Canada
Surface Burning Characteristics of Building Materials
| Product Type | Material Type | Trade Name | Product Standard | |||
Tubing^ § ** |
PEX |
Apollo |
ASTM E84 |
|||
| 1/2", 3/4" | ||||||
^ Flame Spread Index <= 25, Smoke Developed Index <=50 § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ** Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. |
||||||
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Tubing! * ^ ~ ¢ § ++ [G] |
PEX 5106/5306 |
Apollo |
ASTM F876/F877 |
|||
| 3/8" - 2" | ||||||
! Certified for blue, natural, red colors.
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Pipe may have a blue, red or white coating.
~ Pipe may utilize blue, red, or black colored ink on the printline.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Tubing! * ^ ~ ¢ § ++ [1] [G] |
PEX 5106/5306 |
Apollo |
CSA B137.5 |
|||
| 3/8" - 2" | ||||||
! Certified for blue, natural, red colors.
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Pipe may have a blue, red or white coating.
~ Pipe may utilize blue, red, or black colored ink on the printline.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[1] Tubing certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
marked, as applicable, with the following fitting system designation(s): ASTM F877, ASTM
F2159, ASTM F1807, ASTM F1960, ASTM F2098 and ASSE 1061.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Radiant Floor Heating
| Product Type | Material Type | Trade Name | Product Standard | |||
Tubing* @ ^ ¢ ¥ |
PEX 0306, 0006, 5106 |
Apollo PEX RFH |
ASTM F876/F877 |
|||
| 3/8" - 1 1/2" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. @ This barrier tubing product has been evaluated against the performance requirements of ASTM F876/F877. This product is not NSF Certified for use in a potable water distribution system for PEX 0306 and PEX 0006 Materials. This product has been evaluated for use in radiant floor heating (NSF-rfh) applications only. ^ Available in black, orange and red. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. ¥ Product is Certified to the Uniform Mechanical Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Mechanical Code™. |
||||||
Tubing* @ ^ ¢ ¥ [1] |
PEX 0306, 0006, 5106 |
Apollo PEX RFH |
CSA B137.5 |
|||
| 3/8" - 1 1/2" | ||||||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
@ This barrier tubing product has been evaluated against the performance requirements of
ASTM F876/F877.
This product is not NSF Certified for use in a potable water distribution system for PEX
0306 and PEX
0006 Materials. This product has been evaluated for use in radiant floor heating
(NSF-rfh) applications
only.
^ Available in black, orange and red.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
¥ Product is Certified to the Uniform Mechanical Code™. Installation in accordance with
the manufacturer's instructions and the requirements of the latest edition of the
Uniform Mechanical Code™.
[1] Tubing certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s)
for which the tubing is recommended by the manufacturer, and shall be marked, as
applicable, with the
following fitting system designation(s): ASTM F877, ASTM F2159, ASTM F1807, ASTM F1960,
ASTM F2098, and
ASSE 1061.
|
||||||
Number of matching Manufacturers is 1
Number of matching Products is 11
Processing time was 0 seconds
