NSF Product and Service Listings
These NSF Official Listings are current as of Thursday, July 17, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?Company=C0690738&Standard=014&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| Georg Fischer Central Plastics LLC | |
| 4949 Joseph Hardin Drive | |
| Dallas, TX 75236 | |
| United States | |
| 469-801-2246 |
Facility : Elizabethtown, KY
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ [1] [G] |
PE 4710 |
+GF+ DESIGN FLOW |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] These pipe sizes are not certified for use in potable water applications containing
oxidizing disinfectants and shall not be marked with a CC oxidative resistance
classification.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe* + [G] |
PE 4710 |
+GF+ DESIGN FLOW |
AWWA C906 |
|||
| 4" - 26" IPS DR 7 | ||||||
| 4" - 28" IPS DR 7.3[2] | ||||||
|
4" - 34" IPS DR 9 |
||||||
| 4" - 42" IPS DR 11 | ||||||
| 4" - 48" IPS DR 13.5 | ||||||
| 4" - 54" IPS DR 15.5[2] | ||||||
|
4" - 54" IPS DR 17 |
||||||
| 4" - 54" IPS DR 21 | ||||||
| 4" - 54" IPS DR 26[2] | ||||||
|
4" - 54" IPS DR 32.5[2] |
||||||
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local
requirements. It is the responsibility of the end user to ensure that the product is
suitable for the
intended application.
* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ [G] |
PE 4710 |
+GF+ DESIGN FLOW |
ASTM D3035 |
|||
| 1/2" DR 7[1] | ||||||
|
3/4" - 3" DR 7 |
||||||
| 1/2" DR 9[1] | ||||||
|
3/4" - 3" DR 9 |
||||||
| 1/2" - 3" DR 11[1] | ||||||
|
1/2" - 3" DR 13.5[1] |
||||||
|
3/4" - 3" DR 15.5[1] |
||||||
|
3/4" - 3" DR 17[1] |
||||||
|
1" - 3" DR 21[1] |
||||||
|
1" - 3" DR 26[1] |
||||||
|
1 1/2" - 3" DR 32.5[1] |
||||||
[1] These pipe sizes are not certified for use in potable water applications containing
oxidizing disinfectants and shall not be marked with a CC oxidative resistance
classification.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ [G] |
PE 4710 |
+GF+ DESIGN FLOW |
ASTM F714 |
|||
| 4" - 18" IPS DR 7.3 | ||||||
| 4" - 26" IPS DR 7 | ||||||
| 4" - 36" IPS DR 9 | ||||||
| 4" - 42" IPS DR 11 | ||||||
| 4" - 48" IPS DR 13.5 | ||||||
| 4" - 54" IPS DR 15.5[2] | ||||||
|
4" - 54" IPS DR 17 |
||||||
| 4" - 54" IPS DR 21 | ||||||
| 4" - 54" IPS DR 26 | ||||||
| 4" - 54" IPS DR 32.5 | ||||||
| 4" - 54" IPS DR 41 | ||||||
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local
requirements. It is the responsibility of the end user to ensure that the product is
suitable for the
intended application.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Titusville, PA
Gas Applications - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* |
PE 2708 |
+GF+ DESIGN FLOW |
ASTM D2513 |
|||
| 1/2" CTS - .090 WALL | ||||||
| 3/4" CTS - .090 WALL | ||||||
| 1 1/8" CTS - .099 WALL, 0.090 WALL | ||||||
| 1/2" IPS SDR 9.3 | ||||||
| 3/4" IPS SDR 11 | ||||||
| 1" IPS SDR 11 | ||||||
| 1 1/4" IPS SDR 10, 11 | ||||||
| 1 1/2" IPS SDR 11 | ||||||
| 2" IPS SDR 11 | ||||||
| 3" IPS SDR 11, 11.5 | ||||||
| 4" IPS SDR 11, 11.5, 13.5 | ||||||
* Product is authorized to bear the cNSF Mark. |
||||||
Pipe* |
PE 4710 |
+GF+ DESIGN FLOW |
ASTM D2513 |
|||
| 1/2" CTS - .090 WALL, .062 WALL | ||||||
| 3/4" CTS - .090 WALL | ||||||
| 1" CTS -.121, .101, .101, .099, .090 WALL | ||||||
| 1 1/4" CTS - .090 WALL | ||||||
| 3/4" IPS SDR 7.3, 9, 11 | ||||||
| 1" IPS SDR 7.3, 9, 11 | ||||||
| 1 1/4" IPS SDR 7.3, 9, 11 | ||||||
| 1 1/2" IPS SDR 7.3, 9, 11 | ||||||
| 2" IPS SDR 7.3, 9, 11, 13.5, 15.5, 17 | ||||||
| 3" IPS SDR 7.3, 9, 11, 13.5, 15.5, 17 | ||||||
| 4" IPS SDR 7.3, 9, 11, 13.5, 15.5, 17 | ||||||
| 6" IPS SDR 9, 11, 13.5, 15.5, 17 | ||||||
| 8" IPS SDR 11, 13.5, 15.5, 17 | ||||||
| 10" IPS SDR 13.5, 15.5, 17 | ||||||
| 12" IPS SDR 15.5, 17 | ||||||
* Product is authorized to bear the cNSF Mark. |
||||||
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe$ + [G] |
PE 4710 |
+GF+ DESIGN FLOW |
ASTM D2239 |
|||
| 3/4" - 2" SIDR 5.3 | ||||||
| 3/4" - 2" SIDR 7 | ||||||
| 3/4" - 2" SIDR 9 | ||||||
| 1/2" - 3" SIDR 11.5[1] | ||||||
|
3/4" - 3" SIDR 15[1] |
||||||
|
1/2" - 2" SIDR 19[1] |
||||||
[1] These pipe sizes are not certified for use in potable water applications containing
oxidizing disinfectants and shall not be marked with a CC oxidative resistance
classification.
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ [G] |
PE 4710 |
+GF+ DESIGN FLOW |
ASTM D2737 |
|||
| 3/4" - 2" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe$ + [G] |
PE 4710 |
+GF+ DESIGN FLOW |
ASTM D3035 |
|||
| 1/2" DR 7[1] | ||||||
|
3/4" - 3" DR 7 |
||||||
| 1/2" DR 9[1] | ||||||
|
3/4" - 3" DR 9 |
||||||
| 1/2" - 3" DR 11[1] | ||||||
|
1/2" - 3" DR 13.5[1] |
||||||
|
3/4" - 3" DR 15.5[1] |
||||||
|
3/4" - 3" DR 17[1] |
||||||
|
1" - 3" DR 21[1] |
||||||
|
1" - 3" DR 26[1] |
||||||
|
1 1/2" - 3" DR 32.5[1] |
||||||
[1] These pipe sizes are not certified for use in potable water applications containing
oxidizing disinfectants and shall not be marked with a CC oxidative resistance
classification.
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe$ + [G] |
PE 4710 |
+GF+ DESIGN FLOW |
ASTM F714 |
|||
| 4" - 18" IPS DR 7.3 | ||||||
| 4" - 26" IPS DR 7 | ||||||
| 4" - 36" IPS DR 9 | ||||||
| 4" - 42" IPS DR 11 | ||||||
| 4" - 48" IPS DR 13.5 | ||||||
| 4" - 54" IPS DR 15.5[2] | ||||||
|
4" - 54" IPS DR 17 |
||||||
| 4" - 54" IPS DR 21 | ||||||
| 4" - 54" IPS DR 26 | ||||||
| 4" - 54" IPS DR 32.5 | ||||||
| 4" - 54" IPS DR 41 | ||||||
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local
requirements. It is the responsibility of the end user to ensure that the product is
suitable for the
intended application.
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ [G] |
PE 4710 |
+GF+ DESIGN FLOW |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe$ * + [G] |
PE 4710 |
+GF+ DESIGN FLOW |
AWWA C906 |
|||
| 4" - 26" IPS DR 7 | ||||||
| 4" - 28" IPS DR 7.3[2] | ||||||
|
4" - 34" IPS DR 9 |
||||||
| 4" - 42" IPS DR 11 | ||||||
| 4" - 48" IPS DR 13.5 | ||||||
| 4" - 54" IPS DR 15.5[2] | ||||||
|
4" - 54" IPS DR 17 |
||||||
| 4" - 54" IPS DR 21 | ||||||
| 4" - 54" IPS DR 26[2] | ||||||
|
4" - 54" IPS DR 32.5[2] |
||||||
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local
requirements. It is the responsibility of the end user to ensure that the product is
suitable for the
intended application.
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a.
* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Rapid City, SD
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ [1] [G] |
PE 4710 |
+GF+ DESIGN FLOW |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] These pipe sizes are not certified for use in potable water applications containing
oxidizing disinfectants and shall not be marked with a CC oxidative resistance
classification.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe* + [G] |
PE 4710 |
+GF+ DESIGN FLOW |
AWWA C906 |
|||
| 4" - 26" IPS DR 7 | ||||||
| 4" - 28" IPS DR 7.3[2] | ||||||
|
4" - 34" IPS DR 9 |
||||||
| 4" - 42" IPS DR 11 | ||||||
| 4" - 48" IPS DR 13.5 | ||||||
| 4" - 54" IPS DR 15.5[2] | ||||||
|
4" - 54" IPS DR 17 |
||||||
| 4" - 54" IPS DR 21 | ||||||
| 4" - 54" IPS DR 26[2] | ||||||
|
4" - 54" IPS DR 32.5[2] |
||||||
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local
requirements. It is the responsibility of the end user to ensure that the product is
suitable for the
intended application.
* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ [G] |
PE 4710 |
+GF+ DESIGN FLOW |
ASTM D3035 |
|||
| 1/2" DR 7[1] | ||||||
|
3/4" - 3" DR 7 |
||||||
| 1/2" DR 9[1] | ||||||
|
3/4" - 3" DR 9 |
||||||
| 1/2" - 3" DR 11[1] | ||||||
|
1/2" - 3" DR 13.5[1] |
||||||
|
3/4" - 3" DR 15.5[1] |
||||||
|
3/4" - 3" DR 17[1] |
||||||
|
1" - 3" DR 21[1] |
||||||
|
1" - 3" DR 26[1] |
||||||
|
1 1/2" - 3" DR 32.5[1] |
||||||
[1] These pipe sizes are not certified for use in potable water applications containing
oxidizing disinfectants and shall not be marked with a CC oxidative resistance
classification.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ [G] |
PE 4710 |
+GF+ DESIGN FLOW |
ASTM F714 |
|||
| 4" - 18" IPS DR 7.3 | ||||||
| 4" - 26" IPS DR 7 | ||||||
| 4" - 36" IPS DR 9 | ||||||
| 4" - 42" IPS DR 11 | ||||||
| 4" - 48" IPS DR 13.5 | ||||||
| 4" - 54" IPS DR 15.5[2] | ||||||
|
4" - 54" IPS DR 17 |
||||||
| 4" - 54" IPS DR 21 | ||||||
| 4" - 54" IPS DR 26 | ||||||
| 4" - 54" IPS DR 32.5 | ||||||
| 4" - 54" IPS DR 41 | ||||||
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local
requirements. It is the responsibility of the end user to ensure that the product is
suitable for the
intended application.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Cedar City, UT
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ [G] |
PE 4710 |
+GF+ DESIGN FLOW |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe* + [G] |
PE 3408/4710 |
+GF+ DESIGN FLOW |
AWWA C906 |
|||
| 4" - 26" IPS DR 7 | ||||||
| 4" - 28" IPS DR 7.3[2] | ||||||
|
4" - 34" IPS DR 9 |
||||||
| 4" - 42" IPS DR 11 | ||||||
| 4" - 48" IPS DR 13.5 | ||||||
| 4" - 54" IPS DR 15.5[2] | ||||||
|
4" - 54" IPS DR 17 |
||||||
| 4" - 54" IPS DR 21 | ||||||
| 4" - 54" IPS DR 26[2] | ||||||
|
4" - 54" IPS DR 32.5[2] |
||||||
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local
requirements. It is the responsibility of the end user to ensure that the product is
suitable for the
intended application.
* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ [G] |
PE 4710 |
+GF+ DESIGN FLOW |
ASTM D3035 |
|||
| 1/2" DR 7[1] | ||||||
|
3/4" - 3" DR 7 |
||||||
| 1/2" DR 9[1] | ||||||
|
3/4" - 3" DR 9 |
||||||
| 1/2" - 3" DR 11[1] | ||||||
|
1/2" - 3" DR 13.5[1] |
||||||
|
3/4" - 3" DR 15.5[1] |
||||||
|
3/4" - 3" DR 17[1] |
||||||
|
1" - 3" DR 21[1] |
||||||
|
1" - 3" DR 26[1] |
||||||
|
1 1/2" - 3" DR 32.5[1] |
||||||
[1] These pipe sizes are not certified for use in potable water applications containing
oxidizing disinfectants and shall not be marked with a CC oxidative resistance
classification.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ [G] |
PE 4710 |
+GF+ DESIGN FLOW |
ASTM F714 |
|||
| 4" - 18" IPS DR 7.3 | ||||||
| 4" - 26" IPS DR 7 | ||||||
| 4" - 36" IPS DR 9 | ||||||
| 4" - 42" IPS DR 11 | ||||||
| 4" - 48" IPS DR 13.5 | ||||||
| 4" - 54" IPS DR 15.5[2] | ||||||
|
4" - 54" IPS DR 17 |
||||||
| 4" - 54" IPS DR 21 | ||||||
| 4" - 54" IPS DR 26 | ||||||
| 4" - 54" IPS DR 32.5 | ||||||
| 4" - 54" IPS DR 41 | ||||||
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local
requirements. It is the responsibility of the end user to ensure that the product is
suitable for the
intended application.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Number of matching Manufacturers is 1
Number of matching Products is 165
Processing time was 0 seconds
