NSF Product and Service Listings
These NSF Official Listings are current as of Thursday, January 29, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?Company=C0822993&Standard=014&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| HODA VIETNAM TECHNOLOGY DEVELOPMENT COMPANY LIMITED | |
| No. A03, Lot CN8-1B, Nam Dinh Vu Non-tariff and | |
| Industrial Park (Zone 1) | |
| Dong Hai 2 Ward, Hai An District | |
| Hai Phong, | |
| Vietnam | |
| 400 168 2128 | |
| 400 168 2128 |
Facility : Hai Phong, Vietnam
Drain, Waste, and Vent - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | ||||
Fittings# § [1] |
PVC |
Lesso |
ASTM D2665 |
||||
|
Bends |
|||||||
| LP300-012 1-1/4"1/4 BEND (H × H) | LP300-015 1-1/2"1/4 BEND (H × H) | LP300-020 2"1/4 BEND (H × H) | LP300-030 3"1/4 BEND (H × H) | ||||
| LP300-040 4"1/4 BEND (H × H) | LP300-060 6"1/4 BEND (H × H) | LP300S-338 3×3×2"1/4 BEND WITH SIDE INLET (ALL HUB) | LP302-015 1-1/2"1/4 BEND, STREET (S × H) | ||||
| LP302-020 2"1/4 BEND, STREET (S × H) | LP302-030 3"1/4 BEND, STREET (S × H) | LP302-040 4"1/4 BEND, STREET (S × H) | LP303-338 3×3×2"1/4 BEND W/ LOW HEEL INLET (H × H × H) | ||||
| LP303-420 4×4×2"1/4 BEND W/ LOW HEEL INLET (H × H × H) | LP304-420 1/4 bend w/low heel inlet | LP309-020 2"LONG SWEEP 1/4 BEND, STREET (H × S) | LP321-015 1-1/2"1/8 BEND (H × H) | ||||
| LP321-020 2"1/8 BEND (H × H) | LP321-030 3"1/8 BEND (H × H) | LP321-040 4"1/8 BEND (H × H) | LP321-060 6"1/8 BEND (H × H) | ||||
| LP323-015 1-1/2"1/8 BEND, STREET (H × S) | LP323-020 2"1/8 BEND, STREET (H × S) | LP323-030 3"1/8 BEND, STREET (H × S) | LP323-040 4"1/8 BEND, STREET (H × S) | ||||
| LP324-015 1-1/2"1/16 BEND (H × H) | LP324-020 2"1/16 BEND (H × H) | LP324-030 3"1/16 BEND (H × H) | LP324-040 4"1/16 BEND (H × H) | ||||
| LP326-015 1-1/2"1/16 BEND, STREET (H × S) | LP326-020 2"1/16 BEND, STREET (H × S) | LP326-030 3"1/16 BEND, STREET (H × S) | LP326-040 4"1/16 BEND, STREET (H × S) | ||||
| LP327-030 3"DOUBLE 1/4 BEND (H × H × H) | LP329-342 3×4 "CLOSET BEND, REDUCING H × H) | ||||||
|
Bushing Adapter |
|||||||
| LP118-040 4"ADAPTER BUSHING (DWV SPIGOT × HUB) | |||||||
|
Bushings |
|||||||
| LP107-250 2×1-1/4"FLUSH BUSHING (S × H) | LP107-251 2×1-1/2"FLUSH BUSHING (S × H) | LP107-338 3×2"FLUSH BUSHING (S × H) | LP107-420 4×2"FLUSH BUSHING (S × H) | ||||
| LP107-422 4×3"FLUSH BUSHING (S × H) | |||||||
|
Couplings |
|||||||
| LP100-015 1-1/2"COUPLING (H × H) | LP100-020 2"COUPLING (H × H) | LP100-030 3"COUPLING (H × H) | LP100-040 4"COUPLING (H × H) | ||||
| LP100-060 6"COUPLING (H × H) | LP100-080 8"COUPLING (H × H) | ||||||
|
Double Reducing Tees |
|||||||
| LP429-251 2×2×1-1/2×1-1/2"DOUBLE SANITARY TEE, REDUCINGALL HUB) | LP429-338 3×3×2×2"DOUBLE SANITARY TEE, REDUCINGALL HUB) | ||||||
|
Elbow Traps |
|||||||
| LP335-030 3"TRAP ELBOW (FOR USE WITH TRAPS ONLY) (H × S) | |||||||
|
Female Adapters |
|||||||
| LP101-015 1-1/2"FEMALE ADAPTER (FPT × H) | LP101-020 2"FEMALE ADAPTER (FPT × H) | LP101-030 3"FEMALE ADAPTER (FPT × H) | LP101-040 4"FEMALE ADAPTER (FPT × H) | ||||
|
Flanges |
|||||||
| LP800-040 4×4"CLOSET FLANGE (H) | LP800-422 4×3"CLOSET FLANGE (H) | ||||||
|
Increaser Reducers |
|||||||
| LP102-251 2×1-1/2"PIPE INCREASER-REDUCER (H × H) | LP102-337 3×1-1/2"PIPE INCREASER-REDUCER (H × H) | LP102-338 3×2"PIPE INCREASER-REDUCER (H × H) | |||||
|
Male Adapter |
|||||||
| LP109-015 1-1/2"MALE ADAPTER (MPT × H) | LP109-020 2"MALE ADAPTER (MPT × H) | LP109-030 3"MALE ADAPTER (MPT × H) | |||||
|
Male Adapters with Plastic Nut |
|||||||
| LP103P-015 1-1/2"TRAP ADAPTER-MALE W/PLASTIC NUT (S × SLIP) | |||||||
|
P-Traps |
|||||||
| LP706X-020 2"P-TRAP (H × H) | LP710-020 2" P-TRAP, LOW PROFILE (H x H) | ||||||
|
Plugs |
|||||||
| LP106-020 2"CLEANOUT PLUGMPT) | LP106-030 3"CLEANOUT PLUGMPT) | LP106-040 4"CLEANOUT PLUGMPT) | |||||
|
Reducing Tees |
|||||||
| LP401-241 2×1-1/2×1-1/2"REDUCING SANITARY TEE (ALL HUB) | LP401-251 2×2×1-1/2"REDUCING SANITARY TEE (ALL HUB) | LP401-257 2×1-1/2×2"REDUCING SANITARY TEE (ALL HUB) | LP401-337 3×3×1-1/2"REDUCING SANITARY TEE (ALL HUB) | ||||
| LP401-338 3×3×2"REDUCING SANITARY TEE (ALL HUB) | LP401-420 4×4×2"REDUCING SANITARY TEE (ALL HUB) | LP401-422 4×4×3"REDUCING SANITARY TEE (ALL HUB) | LP416-338 3×3×3×2"SANITARY TEE W/ LEFT SIDE INLET (ALL HUB) | ||||
| LP417-338 3×3×3×2"SANITARY TEE W/ RIGHT SIDE INLET (ALL HUB) | |||||||
|
Reducing WYEs |
|||||||
| LP601-337 3×3×1-1/2" REDUCING WYEALL HUB) | LP601-338 3×3×2" REDUCING WYEALL HUB) | LP601-420 4×4×2" REDUCING WYEALL HUB) | LP601-422 4×4×3" REDUCING WYEALL HUB) | ||||
| LP601-532 6×6×4" REDUCING WYEALL HUB) | LP611-040 4"DOUBLE WYE (ALL HUB) | LP612-338 3×3×2×2"REDUCING DOUBLE WYE (ALL HUB) | LP612-422 4×4×3×3"REDUCING DOUBLE WYE (ALL HUB) | ||||
|
Repair Coupling |
|||||||
| LP130-015 1-1/2"REPAIR COUPLING (H × H) | LP130-020 2"REPAIR COUPLING (H × H) | LP130-030 3"REPAIR COUPLING (H × H) | |||||
|
Return Bends |
|||||||
| LP700-020 2"RETURN BEND (H × H) | |||||||
|
Sanitary Tees |
|||||||
| LP400-015 1-1/2"SANITARY TEE (ALL HUB) | LP400-020 2"SANITARY TEE (ALL HUB) | LP400-030 3"SANITARY TEE (ALL HUB) | LP400-040 4"SANITARY TEE (ALL HUB) | ||||
|
Sweeps |
|||||||
| LP304-015 1-1/2"LONG SWEEP 1/4 BEND (H × H) | LP304-020 2"LONG SWEEP 1/4 BEND (H × H) | LP304-030 3"LONG SWEEP 1/4 BEND (H × H) | LP304-040 4"LONG SWEEP 1/4 BEND (H × H) | ||||
|
Tees |
|||||||
| LP444X-030 3"CLEANOUT TEE W/ C.O. PLUG (H × H) | LP445-020 2"FLUSH C.O. TEE (H × H × FPT) | LP445-030 3"FLUSH C.O. TEE (H × H × FPT) | LP445-040 4"FLUSH C.O. TEE (H × H × FPT) | ||||
| LP448-040 4"2-WAY CLEANOUT (ALL HUB) | |||||||
|
Vents |
|||||||
| LP333-020 2"VENT ELLSTREET (H × S) | |||||||
|
WYE Fittings |
|||||||
| LP600-020 2"WYE (ALL HUB) | LP600-030 3"WYE (ALL HUB) | LP600-040 4"WYE (ALL HUB) | LP600-060 6"WYE (ALL HUB) | ||||
|
WYE and Bends |
|||||||
| LP501-020 2"COMBINATION WYE AND 1/8 BEND (ONE PIECE) (ALL HUB) | LP501-030 3"COMBINATION WYE AND 1/8 BEND (ONE PIECE) (ALL HUB) | LP501-040 4"COMBINATION WYE AND 1/8 BEND (ONE PIECE) (ALL HUB) | LP502-337 3×3×1-1/2"COMBINATION WYE AND 1/8 BEND, REDUCING (ONE PIECE) (ALL HUB) | ||||
| LP502-338 3×3×2"COMBINATION WYE AND 1/8 BEND, REDUCING (ONE PIECE) (ALL HUB) | LP502-420 4×4×2"COMBINATION WYE AND 1/8 BEND, REDUCING (ONE PIECE) (ALL HUB) | LP502-422 4×4×3"COMBINATION WYE AND 1/8 BEND, REDUCING (ONE PIECE) (ALL HUB) | |||||
# This product may be marked with an alternate trade name: Liansu.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[1] Figure numbers may have the following prefix used to identify retail packaging
requirements: R
|
|||||||
Fittings# § [1] |
PVC |
Lesso |
CSA B181.2 |
||||
|
Bends |
|||||||
| LP300-012 1-1/4"1/4 BEND (H × H) | LP300-015 1-1/2"1/4 BEND (H × H) | LP300-020 2"1/4 BEND (H × H) | LP300-030 3"1/4 BEND (H × H) | ||||
| LP300-040 4"1/4 BEND (H × H) | LP300-060 6"1/4 BEND (H × H) | LP300S-338 3×3×2"1/4 BEND WITH SIDE INLET (ALL HUB) | LP302-015 1-1/2"1/4 BEND, STREET (S × H) | ||||
| LP302-020 2"1/4 BEND, STREET (S × H) | LP302-030 3"1/4 BEND, STREET (S × H) | LP302-040 4"1/4 BEND, STREET (S × H) | LP303-338 3×3×2"1/4 BEND W/ LOW HEEL INLET (H × H × H) | ||||
| LP303-420 4×4×2"1/4 BEND W/ LOW HEEL INLET (H × H × H) | LP304-420 1/4 bend w/low heel inlet | LP309-020 2"LONG SWEEP 1/4 BEND, STREET (H × S) | LP321-015 1-1/2"1/8 BEND (H × H) | ||||
| LP321-020 2"1/8 BEND (H × H) | LP321-030 3"1/8 BEND (H × H) | LP321-040 4"1/8 BEND (H × H) | LP321-060 6"1/8 BEND (H × H) | ||||
| LP323-015 1-1/2"1/8 BEND, STREET (H × S) | LP323-020 2"1/8 BEND, STREET (H × S) | LP323-030 3"1/8 BEND, STREET (H × S) | LP323-040 4"1/8 BEND, STREET (H × S) | ||||
| LP324-015 1-1/2"1/16 BEND (H × H) | LP324-020 2"1/16 BEND (H × H) | LP324-030 3"1/16 BEND (H × H) | LP324-040 4"1/16 BEND (H × H) | ||||
| LP326-015 1-1/2"1/16 BEND, STREET (H × S) | LP326-020 2"1/16 BEND, STREET (H × S) | LP326-030 3"1/16 BEND, STREET (H × S) | LP326-040 4"1/16 BEND, STREET (H × S) | ||||
| LP327-030 3"DOUBLE 1/4 BEND (H × H × H) | LP329-342 3×4 "CLOSET BEND, REDUCING H × H) | ||||||
|
Bushing Adapter |
|||||||
| LP118-040 4"ADAPTER BUSHING (DWV SPIGOT × HUB) | |||||||
|
Bushings |
|||||||
| LP107-250 2×1-1/4"FLUSH BUSHING (S × H) | LP107-251 2×1-1/2"FLUSH BUSHING (S × H) | LP107-338 3×2"FLUSH BUSHING (S × H) | LP107-420 4×2"FLUSH BUSHING (S × H) | ||||
| LP107-422 4×3"FLUSH BUSHING (S × H) | |||||||
|
Couplings |
|||||||
| LP100-015 1-1/2"COUPLING (H × H) | LP100-020 2"COUPLING (H × H) | LP100-030 3"COUPLING (H × H) | LP100-040 4"COUPLING (H × H) | ||||
| LP100-060 6"COUPLING (H × H) | LP100-080 8"COUPLING (H × H) | ||||||
|
Double Reducing Tees |
|||||||
| LP429-251 2×2×1-1/2×1-1/2"DOUBLE SANITARY TEE, REDUCINGALL HUB) | LP429-338 3×3×2×2"DOUBLE SANITARY TEE, REDUCINGALL HUB) | ||||||
|
Elbow Traps |
|||||||
| LP335-030 3"TRAP ELBOW (FOR USE WITH TRAPS ONLY) (H × S) | |||||||
|
Female Adapters |
|||||||
| LP101-015 1-1/2"FEMALE ADAPTER (FPT × H) | LP101-020 2"FEMALE ADAPTER (FPT × H) | LP101-030 3"FEMALE ADAPTER (FPT × H) | LP101-040 4"FEMALE ADAPTER (FPT × H) | ||||
|
Flanges |
|||||||
| LP800-040 4×4"CLOSET FLANGE (H) | LP800-422 4×3"CLOSET FLANGE (H) | ||||||
|
Increaser Reducers |
|||||||
| LP102-251 2×1-1/2"PIPE INCREASER-REDUCER (H × H) | LP102-337 3×1-1/2"PIPE INCREASER-REDUCER (H × H) | LP102-338 3×2"PIPE INCREASER-REDUCER (H × H) | |||||
|
Male Adapter |
|||||||
| LP109-015 1-1/2"MALE ADAPTER (MPT × H) | LP109-020 2"MALE ADAPTER (MPT × H) | LP109-030 3"MALE ADAPTER (MPT × H) | |||||
|
Male Adapters with Plastic Nut |
|||||||
| LP103P-015 1-1/2"TRAP ADAPTER-MALE W/PLASTIC NUT (S × SLIP) | |||||||
|
P-Traps |
|||||||
| LP706X-020 2"P-TRAP (H × H) | LP710-020 2" P-TRAP, LOW PROFILE (H x H) | ||||||
|
Plugs |
|||||||
| LP106-020 2"CLEANOUT PLUGMPT) | LP106-030 3"CLEANOUT PLUGMPT) | LP106-040 4"CLEANOUT PLUGMPT) | |||||
|
Reducing Tees |
|||||||
| LP401-241 2×1-1/2×1-1/2"REDUCING SANITARY TEE (ALL HUB) | LP401-251 2×2×1-1/2"REDUCING SANITARY TEE (ALL HUB) | LP401-257 2×1-1/2×2"REDUCING SANITARY TEE (ALL HUB) | LP401-337 3×3×1-1/2"REDUCING SANITARY TEE (ALL HUB) | ||||
| LP401-338 3×3×2"REDUCING SANITARY TEE (ALL HUB) | LP401-420 4×4×2"REDUCING SANITARY TEE (ALL HUB) | LP401-422 4×4×3"REDUCING SANITARY TEE (ALL HUB) | LP416-338 3×3×3×2"SANITARY TEE W/ LEFT SIDE INLET (ALL HUB) | ||||
| LP417-338 3×3×3×2"SANITARY TEE W/ RIGHT SIDE INLET (ALL HUB) | |||||||
|
Reducing WYEs |
|||||||
| LP601-337 3×3×1-1/2" REDUCING WYEALL HUB) | LP601-338 3×3×2" REDUCING WYEALL HUB) | LP601-420 4×4×2" REDUCING WYEALL HUB) | LP601-422 4×4×3" REDUCING WYEALL HUB) | ||||
| LP601-532 6×6×4" REDUCING WYEALL HUB) | LP611-040 4"DOUBLE WYE (ALL HUB) | LP612-338 3×3×2×2"REDUCING DOUBLE WYE (ALL HUB) | LP612-422 4×4×3×3"REDUCING DOUBLE WYE (ALL HUB) | ||||
|
Repair Coupling |
|||||||
| LP130-015 1-1/2"REPAIR COUPLING (H × H) | LP130-020 2"REPAIR COUPLING (H × H) | LP130-030 3"REPAIR COUPLING (H × H) | |||||
|
Return Bends |
|||||||
| LP700-020 2"RETURN BEND (H × H) | |||||||
|
Sanitary Tees |
|||||||
| LP400-015 1-1/2"SANITARY TEE (ALL HUB) | LP400-020 2"SANITARY TEE (ALL HUB) | LP400-030 3"SANITARY TEE (ALL HUB) | LP400-040 4"SANITARY TEE (ALL HUB) | ||||
|
Sweeps |
|||||||
| LP304-015 1-1/2"LONG SWEEP 1/4 BEND (H × H) | LP304-020 2"LONG SWEEP 1/4 BEND (H × H) | LP304-030 3"LONG SWEEP 1/4 BEND (H × H) | LP304-040 4"LONG SWEEP 1/4 BEND (H × H) | ||||
|
Tees |
|||||||
| LP444X-030 3"CLEANOUT TEE W/ C.O. PLUG (H × H) | LP445-020 2"FLUSH C.O. TEE (H × H × FPT) | LP445-030 3"FLUSH C.O. TEE (H × H × FPT) | LP445-040 4"FLUSH C.O. TEE (H × H × FPT) | ||||
| LP448-040 4"2-WAY CLEANOUT (ALL HUB) | |||||||
|
Vents |
|||||||
| LP333-020 2"VENT ELLSTREET (H × S) | |||||||
|
WYE Fittings |
|||||||
| LP600-020 2"WYE (ALL HUB) | LP600-030 3"WYE (ALL HUB) | LP600-040 4"WYE (ALL HUB) | LP600-060 6"WYE (ALL HUB) | ||||
|
WYE and Bends |
|||||||
| LP501-020 2"COMBINATION WYE AND 1/8 BEND (ONE PIECE) (ALL HUB) | LP501-030 3"COMBINATION WYE AND 1/8 BEND (ONE PIECE) (ALL HUB) | LP501-040 4"COMBINATION WYE AND 1/8 BEND (ONE PIECE) (ALL HUB) | LP502-337 3×3×1-1/2"COMBINATION WYE AND 1/8 BEND, REDUCING (ONE PIECE) (ALL HUB) | ||||
| LP502-338 3×3×2"COMBINATION WYE AND 1/8 BEND, REDUCING (ONE PIECE) (ALL HUB) | LP502-420 4×4×2"COMBINATION WYE AND 1/8 BEND, REDUCING (ONE PIECE) (ALL HUB) | LP502-422 4×4×3"COMBINATION WYE AND 1/8 BEND, REDUCING (ONE PIECE) (ALL HUB) | |||||
# This product may be marked with an alternate trade name: Liansu.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[1] Figure numbers may have the following prefix used to identify retail packaging
requirements: R
|
|||||||
Fittings# ¢ § [1] [2] [G] |
ABS |
Lesso |
ASTM D2661 |
||||
|
22½° ELBOW(HUB×HUB) |
|||||||
| LN324-015 1-1/2" | LN324-020 2" | LN324-030 3" | LN324-040 4" | ||||
| LN324-060 6" | |||||||
|
22½° STREET ELBOW(HUB×SPG) |
|||||||
| LN326-015 1-1/2" | LN326-020 2" | LN326-030 3" | LN326-040 4"f | ||||
|
45° STREET WYE (SPG×HUB×HUB) |
|||||||
| LN602-015 1 1/2" | LN602-020 2" | LN602-030 3" | LN602-040 4" | ||||
|
45° REDUCING DOUBLE WYE(ALL HUB) |
|||||||
| LN612-251 2 x 2 x 1-1/2 x 1-1/2" | LN612-337 3 x 3 x 1-1/2 x 1-1/2" | LN612-338 3×3×2×2" | LN612-420 4 x 4 x 2 x 2" | ||||
| LN612-422 4 x 4 x 3 x 3" | LN612-532 6 x 6 x 4 x 4" | ||||||
|
45° REDUCING STREET WYE(SPG×HUB×HUB) |
|||||||
| LN603-251 2 x 2 x 1-1/2" | LN603-337 3 x 3 x 1-1/2" | LN603-338 3 x 3 x 2" | LN603-420 4 x 4 x 2" | ||||
| LN603-422 4 x 4 x 3" | |||||||
|
45° REDUCING WYE(HUB×HUB×HUB) |
|||||||
| LN601-241 2×1-1/2×1-1/2" | LN601-251L 2×2×1-1/2" | LN601-251 2×1-1/2×1-1/2" | LN601-337L 3×3×1-1/2" | ||||
| LN601-337 2×1-1/2×1-1/2" | LN601-338L 3×3×2" | LN601-338 2×1-1/2×1-1/2" | LN601-419 4 x 4 x 1-1/2" | ||||
| LN601-420L 4×4×2" | LN601-420 2×1-1/2×1-1/2" | LN601-422L 4×4×3" | LN601-422 2×1-1/2×1-1/2" | ||||
| LN601-530 6 x 6 x 3" | LN601-532 6×6×4" | ||||||
|
45° STREET ELBOW (HUB×SPG) |
|||||||
| LN323-012 1-1/4" | LN323-015 1-1/2" | LN323-020L 2" | LN323-030L 3" | ||||
| LN323-040 4" | LN323-060 6" | ||||||
|
45° STREET ELBOW-SHORT TURN (HUB×SPG) |
|||||||
| LN323-015S 1-1/2" | LN323-020S 2" | LN323-030S 3" | LN323-040S 4" | ||||
|
45° WYE (HUB×HUB×HUB) |
|||||||
| LN600-012 1-1/4" | LN600-015L 1-1/2" | LN600-015 1-1/2" | LN600-020L 2" | ||||
| LN600-020 2" | LN600-030L 3" | LN600-030 3" | LN600-040L 4" | ||||
| LN600-040 4" | LN600-060 6" | ||||||
|
45°DOUBLE WYE(ALL HUB) |
|||||||
| LN611-015 1-1/2" | LN611-020 2" | LN611-030L 3" | LN611-030 3" | ||||
| LN611-040 4" | |||||||
|
45°ELBOW (HUB×HUB) |
|||||||
| LN321-012 1-1/4" | LN321-015 1-1/2" | LN321-020L 2" | LN321-030L 3" | ||||
| LN321-040 4" | LN321-060 6" | ||||||
|
45°ELBOW-SHORT TURN (HUB×HUB) |
|||||||
| LN321-015S 1-1/2" | LN321-020S 2" | LN321-030S 3" | LN321-040S 4" | ||||
|
45°WYE(HUB×HUB×HUB) |
|||||||
| LN601-209 1-1/2×1-1/2"×1/2" | LN601-210 1-1/2×1-1/2"×3/4" | ||||||
|
60° STREET ELBOW (HUB×SPG) |
|||||||
| LN320-015 1-1/2" | LN320-020 2" | LN320-030 3" | LN320-040 4" | ||||
|
60°ELBOW(HUB×HUB) |
|||||||
| LN319-015 1-1/2" | LN319-020 2" | LN319-030 3" | LN319-040 4" | ||||
|
90° LONG SWEEP ELBOW,STREET(HUB×SPG) |
|||||||
| LN309-020 2" | LN309-030 3" | LN309-040 4" | |||||
|
90° REDUCING CLOSET ELBOW(HUB×HUB) |
|||||||
| LN329-422 4×3" | |||||||
|
90° REDUCING CLOSET STREET ELBOW (HUB×SPG) |
|||||||
| LN330-342 3 x 4" | LN330-422 4 x 3" | ||||||
|
90° STREET ELBOW (HUB×SPG) |
|||||||
| LN302-012 1-1/4" | LN302-015 1-1/2" | LN302-020 2" | LN302-030 3" | ||||
| LN302-040 4" | LN302-060 6" | ||||||
|
90° STREET ELBOW W/ LOW HEEL INLET (HUB×SPG×HUB) |
|||||||
| LN310-338 3 x 3 x 2" | |||||||
|
90° STREET ELBOW-SHORT TURN (HUB×SPG) |
|||||||
| LN302-015S 1-1/2" | LN302-020S 2" | LN302-030S 3" | LN302-040S 4" | ||||
|
90° VENT ELBOW(HUB×HUB) |
|||||||
| LN331-012 1-1/4" | LN331-015 1-1/2" | LN331-020 2" | LN331-030 3" | ||||
| LN331-040 4" | |||||||
|
90°ELBOW (HUB×HUB) |
|||||||
| LN300-012 1-1/4" | LN300-015 1-1/2" | LN300-020 2" | LN300-030 3" | ||||
| LN300-040 4" | LN300-060 6" | ||||||
|
90°ELBOW W/ LOW HEEL INLET (HUB×HUB×HUB) |
|||||||
| LN303-337 3 x 3 x 1-1/2" | LN303-338 3 x 3 x 2" | LN303-420 4 x 4 x 2" | LN304-012 1-1/4" | ||||
| LN304-015 1-1/2" | LN304-020 2" | LN304-030 3" | LN304-040 4" | ||||
|
90°ELBOW WITH SIDE INLET (HUB×HUB×HUB) |
|||||||
| LN300S-337 3 x 3 x 1-1/2" | LN300S-338 3 x 3 x 2" | ||||||
|
90°ELBOW-SHORT TURN (HUB×HUB) |
|||||||
| LN300-012S 1-1/4" | LN300-015S 1-1/2" | LN300-020S 2" | LN300-030S 3" | ||||
| LN300-040S 4" | LN300-060S 6" | ||||||
|
90°REDUCING CLOSET ST ELBOW W/ TEST CAP (HUB×SPG) |
|||||||
| LN330X-342 3 x 4" | LN330X-422 4 x 3" | ||||||
|
ABS-COPPER ADAPTER (HUB×SJ) |
|||||||
| LN120-015 1-1/2" | LN120-212 1-1/2×1-1/4" | ||||||
|
CAP(HUB) |
|||||||
| LN116-012 1-1/4" | LN116-015 1-1/2" | LN116-020 2" | LN116-030 3" | ||||
| LN116-040 4" | |||||||
|
CLEANOUT ADAPTER (SPG×FIPT) |
|||||||
| LN105-012 1-1/4" | LN105-015 1-1/2" | LN105-020 2" | LN105-030 3" | ||||
| LN105-040 4" | LN105-060 6" | ||||||
|
CLEANOUT ADAPTER W/PLUG(SPG×CLEANOUT W/PLUG) |
|||||||
| LN105X-012 1-1/4" | LN105X-015 1-1/2" | LN105X-020 2" | LN105X-030 3" | ||||
| LN105X-040 4" | LN105X-060 6" | ||||||
|
CLEANOUT PLUG(MIPT) |
|||||||
| LN106-015 1-1/2" | LN106-020 2" | LN106-025 2-1/2" | LN106-030 3" | ||||
| LN106-035 3-1/2" | LN106-040 4" | ||||||
|
CLEANOUT WYE (HUB×HUB×FIPT) |
|||||||
| LN604-015 1-1/2" | |||||||
|
CLOSET FLANGE W/ADJUSTABLE METAL RING (H) |
|||||||
| LN811-040 4" | |||||||
|
CLOSET FLANGE W/ADJUSTABLE METAL RING (S) |
|||||||
| LN811-040 4"×4" | |||||||
|
CLOSET FLANGE W/ KNOCKOUT TEST PLUG(HUB) |
|||||||
| LN800T-040 4 x 4" | LN800T-422L 4 x 3" | LN800T-422 4 x 3" | |||||
|
CLOSET FLANGE W/ PIPE STOP(HUB) |
|||||||
| LN815PS-040 4 x 4 / 4 x 3 | |||||||
|
CLOSET FLANGE W/ADJUSTABLE PLASTIC RING(HUB) |
|||||||
| LN810P-040 4 x 4" | |||||||
|
CLOSET FLANGE W/ADJUSTABLE PLASTIC RING(SPG) |
|||||||
| LN812P-040 4 x 4" | LN812P-422 4 x 3" | ||||||
|
CLOSET FLANGE W/KONCKOUT & PIPE STOP(HUB) |
|||||||
| LN815K-040 4 x 4 / 4 x 3 | |||||||
|
CLOSET FLANGE W/RING-PULL TEST PLUG(HUB) |
|||||||
| LN800R-040 4 x 4" | LN800R-422L 4 x 3" | LN800R-422 4 x 3" | |||||
|
CLOSET FLANGE W/THREADED TEST PLUG(HUB) |
|||||||
| LN800T-040C 4" | LN800T-422CL 4 x 3" | LN800T-422C 4 x 3" | |||||
|
CLOSET FLANGE(FIPT) |
|||||||
| LN830-422 4 x 3 | |||||||
|
CLOSET FLANGE(HUB) |
|||||||
| LN800-040 4×4" | LN800-422L 4×3" | LN800-422 4×3" | |||||
|
CLOSET FLANGE(MIPT) |
|||||||
| LN831-422 4 x 3" | |||||||
|
COMBINATION WYE & 1/8 BEND(ONE PIECE)(HUB×HUB×HUB) |
|||||||
| LN501-015 1-1/2" | LN501-020 2" | LN501-030 3" | LN501-040 4" | ||||
|
COMBINATION WYE & 1/8 BEND(TWO PIECE)(HUB×HUB×HUB) |
|||||||
| LN503-020 2" | |||||||
|
COUPLING (HUB×HUB) |
|||||||
| LN100-012 1-1/4" | LN100-015 1-1/2" | LN100-020 2" | LN100-030 3" | ||||
| LN100-040 4" | LN100-060 6" | ||||||
|
DOUBLE 90° ELBOW(HUB×HUB×HUB) |
|||||||
| LN327-015 1-1/2" | LN327-020 2" | LN327-030 3" | LN327-040 4" | ||||
| LN327-241 2 x 1-1/2 x 1-1/2" | |||||||
|
DOUBLE FIXTURE FITTING(ALL HUB) |
|||||||
| LN500-020 2" | LN500-030 3" | LN500-241 2 x 1-1/2 x 1-1/2 x 1-1/2" | LN500-251 2"×2"×1-1-2"×1-1-2" | ||||
| LN500-257 2 x 1-1/2 x 2 x 2" | LN500-338 3 x 2 x 3 x 3" | ||||||
|
DOUBLE SANITARY TEE W / R & L SIDE INLET(ALL HUB) |
|||||||
| LN439-338 3 x 3 x 3 x 3 x 2 x 2" | |||||||
|
DOUBLE SANITARY TEE W /SIDE INLET(ALL HUB) |
|||||||
| LN438-337 3 x 3 x 3 x 3 x1-1/ 2" | LN438-338 3 x 3 x 3 x 3 x 2" | LN438-420 4 x 4x 4 x 4 x 2" | |||||
|
DOUBLE SANITARY TEE(ALL HUB) |
|||||||
| LN428-015 1-1/2" | LN428-020 2" | LN428-030 3" | LN428-040 4" | ||||
|
DRUM TRAP W / CLEANOUT |
|||||||
| LN702X-363 3 x 6 x 1-1/2" | |||||||
|
EXPANSION JOINT(HUB×HUB) |
|||||||
| LNH119-015 1-1/2" | LNH119-020 2" | LNH119-030 3" | LNH119-040 4" | ||||
|
EXPANSION JOINT(HUB×SPG) |
|||||||
| LNH119S-030 3" | |||||||
|
FEMALE ADAPTER (HUB×FIPT) |
|||||||
| LN101-012 1-1/4" | LN101-015 1-1/2" | LN101-020 2" | LN101-030 3" | ||||
| LN101-040 4" | LN101-060 6" | ||||||
|
FLUSH ADAPTER (SPG×FIPT) |
|||||||
| LN108-209 1-1/2×1/2" | LN108-210 1-1/2×3/4" | LN108-212 1-1/2 x 1-1/4" | LN108-251 2 x 1-1/2" | ||||
| LN108-337 3×1-1/2" | LN108-338 3x 2" | LN108-422 4x3" | |||||
|
FLUSH BUSHING(SPG×HUB) |
|||||||
| LN107-212 1-1/2×1-1/4" | LN107-251 2×1-1/2" | LN107-337 3×1-1/2" | LN107-338 3×2" | ||||
| LN107-419 4×1-1/2" | LN107-420 4×2" | LN107-422 4×3" | LN107-532 6×4" | ||||
|
FLUSH C.O. PLUG(MPT) |
|||||||
| LN110-020 2" | LN110-030 3" | LN110-040 4" | |||||
|
FLUSH CLOSET FLANGE (INSIDE 4", OUTSIDE 3") |
|||||||
| LN815-040 4 x 4 / 4 x 3 | |||||||
|
HUB ADAPTER CAST IRON (HUB×SJ) |
|||||||
| LN123-020 2" | LN123-030 3" | LN123-040 4" | |||||
|
HUB ADAPTER CAST IRON INCREASER(HUB×SJ) |
|||||||
| LN123R-213 1-1/2 x 2" | LN123R-342 3 x 4" | ||||||
|
LA PATTERN P-TRAP W/UNION&PLASTIC NUT(HUB×SJ) |
|||||||
| LN711M-015 1-1/2" | LN711M-212 1-1/2 x 1-1/4" | ||||||
|
MALE ADAPTER(HUB×MIPT) |
|||||||
| LN109-012 1-1/4" | LN109-015 1-1/2" | LN109-020 2" | LN109-030 3" | ||||
| LN109-040 4" | LN109-212 1-1/2×1-1/4" | ||||||
|
MALE ADAPTER(SPG×MIPT) |
|||||||
| LN111-012 1-1/4" | LN111-015 36893 | LN111-020 2" | LN111-030 3" | ||||
| LN111-040 4" | LN111-212 1-1/2×1-1/4" | ||||||
|
NO-HUB ADAPTER(SPG×HUB) |
|||||||
| LN119-020 2" | LN119-030 3" | LN119-040 4" | LN119-251 2 x 1-1/2" | ||||
| LN119-422 4 x 3" | |||||||
|
P-TRAP W/PLUG(HUB×HUB×CLEANOUT W/PLUG) |
|||||||
| LN707X-015 1-1/2" | LN707X-020 2" | ||||||
|
P-TRAP W/UNION &C/O(HUB×HUB×C/O) |
|||||||
| LN712-015 1-1/2" | |||||||
|
P-TRAP W/UNION JOINT(HUB×HUB) |
|||||||
| LN708P-012 1-1/4" | LN708P-015 1-1/2" | LN708P-020 2" | |||||
|
P-TRAP(HUB×HUB) |
|||||||
| LN706X-015 1-1/2" | LN706X-020 2" | LN706X-030 3" | LN706X-040 4" | ||||
|
PIPE INCREASER-REDUCER (HUBxHUB) |
|||||||
| LN102-212 1-1/2×1-1/4" | LN102-251 2×1-1/2" | LN102-337 3×1-1/2" | LN102-338 3×2" | ||||
| LN102-419 4×1-1/2" | LN102-420L 4×2" | LN102-420 4 x 2" | LN102-422L 4×3" | ||||
| LN102-422 4×3" | |||||||
|
PLUG WITH GASKET(MIPT) |
|||||||
| LN106R-012 1-1/4" | LN106R-015 1-1/2" | LN106R-020 2" | LN106R-025 2-1/2" | ||||
| LN106R-030 3" | LN106R-035 2-1/2" | LN106R-040 4" | LN106R-060 6" | ||||
|
REDUCING CLOSET FLANGE(SPG) |
|||||||
| LN801-422 4 x 3" | |||||||
|
REDUCING COMBINATION WYE & 1/8 BEND(HUB×HUB×HUB) |
|||||||
| LN502-241 2 x 1-1/2 x 1-1/2" | LN502-251 2 x 2 x 1-1/2" | LN502-257 2 x 1-1/2 x 2" | LN502-337 3 x 3 x 1-1/2" | ||||
| LN502-338 3 x 3 x 2" | LN502-420 4 x 4 x 2" | LN502-422 4 x 4 x 3" | |||||
|
REDUCING DOUBLE SANITARY TEE(ALL HUB) |
|||||||
| LN429-251 2×2×1-1/2×1-1/2" | LN429-337 3×3×1-1/2×1-1/2" | LN429-338 3 x 3 x 2 x 2" | LN429-420 4 x 4 x 2 x 2" | ||||
| LN429-422 4 x 4 x 3 x 3" | LN429-323 3 x 3 x 2 x 1-1/2" | ||||||
|
REDUCING SANITARY TEE(HUB×HUB×HUB) |
|||||||
| LN401-222 1-1/2 x 1-1/4 x 1-1/4" | LN401-212 1-1/2 x 1-1/2 x 1-1/4" | LN401-225 1-1/2 x 1-1/4 x 1-1/2" | LN401-241L 2×1-1/2×1-1/2" | ||||
| LN401-241 3×3×2" | LN401-251L 2×2×1-1/2" | LN401-251 3×3×2" | LN401-257L 2×1-1/2×2" | ||||
| LN401-257 3×3×2" | LN401-337 3×3×1-1/2" | LN401-338L 3×3×2" | LN401-338 3×3×2" | ||||
| LN401-419 4 x 4 x 1-1/2" | LN401-420 4×4×2" | LN401-422 4×4×3" | LN401-532 6 x 6 x 4" | ||||
|
REDUCING STREET SANITARY TEE(SPG×HUB×HUB) |
|||||||
| LN404-241 2×1-1/2×1-1/2" | LN404-251 2×2×1-1/2" | LN404-257 2×1-1/2×2" | LN404-337 3×3×1-1/2" | ||||
| LN404-338 3 x 3 x 2" | |||||||
|
REPAIR COUPLING(HUB×HUB) |
|||||||
| LN130-015 1-1/2" | LN130-020 2" | LN130-030 3" | LN130-040 4" | ||||
|
RETURN BEND(HUB×HUB) |
|||||||
| LN700-015 1-1/2" | LN700-020 2" | LN700-030 3" | LN700-040 4" | ||||
|
RETURN BEND(HUB×HUB×CLEANOUT W/PLUG) |
|||||||
| LN701-015 1-1/2" | LN701-020 2" | ||||||
|
SANITARY TEE W / LEFT SIDE INLET(ALL HUB) |
|||||||
| LN416-337 3 x 3 x 3 x 1-1/2" | LN416-338 3 x 3 x3 x 2" | LN416-329 3 x 3 x 2 x 2" | LN416-420 4 x 4 x 4 x 2" | ||||
| LN417-337 3 x 3 x 3 x 1-1/2" | LN417-338 3 x 3 x3x 2" | LN417-329 3 x 3 x 2 x 2" | LN417-420 4 x 4 x 4 x 2" | ||||
|
SANITARY TEE W / R& L SIDE INLET(ALL HUB) |
|||||||
| LN418-337 3 x 3 x 3 x 1-1/2 x 1-1/2" | LN418-338 3 x 3 x 3 x 2 x 2" | LN418-420 4"×4"×4"×2"×2" | |||||
|
SANITARY TEE(HUB×HUB×HUB) |
|||||||
| LN400-012L 1-1/4" | LN400-012 1-1/4" | LN400-015L 1-1/2" | LN400-015 1-1/2" | ||||
| LN400-020L 2" | LN400-020 2" | LN400-030 3" | LN400-040L 4" | ||||
| LN400-040 4" | LN400-060 6" | ||||||
|
SEWER & DRAIN ADAPTER (HUBxHUB) |
|||||||
| LN117-422 4×3" | LN117-342 3 x 4" | ||||||
|
SLIP PLUG (SPG) |
|||||||
| LN110S-015 1-1/2" | LN110S-020 2" | LN110S-025 2-1/2" | LN110S-030 3" | ||||
| LN110S-035 3-1/2" | LN110S-040 4" | ||||||
|
STREET SANITARY TEE(SPG×HUB×HUB) |
|||||||
| LN403-015 1-1/2" | LN403-020 2" | LN403-030 3" | LN403-040 4" | ||||
|
TEST TEE(HUBxHUBxFIPT) |
|||||||
| LN445-015 1 -1/2" | LN445-015L 1 -1/2" | LN445-020 2" | LN445-020L 2" | ||||
| LN445-030 3" | LN445-030L 3" | LN445-040 4" | LN445-040L 4" | ||||
| LN445-427 4×3×4" | |||||||
|
TEST TEE(HUB×HUB×CLEANOUT W/PLUG) |
|||||||
| LN444X-427 4×3×4" | LN444X-015L 4×3×4" | LN444X-015 4×3×4" | LN444X-020L 4×3×4" | ||||
| LN444X-020 4×3×4" | LN444X-030L 4×3×4" | LN444X-030 4×3×4" | LN444X-040L 4×3×4" | ||||
| LN444X-040 4×3×4" | |||||||
|
THREADED CAP (FIPT) |
|||||||
| LN135-015 1-1/2" | LN135-020 2" | LN135-030 3" | |||||
|
TRAP ADAPTER (HUB x SJ) |
|||||||
| LN104-012 1-1/4" | LN104-015 1-1/2" | LN104-020 2" | LN104-212 1-1/2" X 1-1/4" | ||||
|
TRAP ADAPTER (SPGXSJ) |
|||||||
| LN103-012 1-1/4" | LN103-015 1-1/2" | LN103-020 2" | LN103-212 1-1/2" X 1-1/4" | ||||
|
TRAP ADAPTER W/ PLASTIC NUT & WASHER(HUB×SJ) |
|||||||
| LN104X-012 1-1/4" | LN104X-015 1-1/2" | LN104X-020 2" | LN104X-212 1-1/2×1-1/4" | ||||
|
TRAP ADAPTER W/ PLASTIC NUT & WASHER(SPG×SJ) |
|||||||
| LN103X-012 1-1/4" | LN103X-015 1-1/2" | LN103X-020 2" | LN103X-212 1-1/2×1-1/4" | ||||
|
TRAP ADAPTER W/CHROME NUT & WASHER (SPG×SJ) |
|||||||
| LN103W-015 1-1/2" | LN103W-020 2" | LN103W-212 1-1/2×1-1/4" | |||||
|
TRAP ADAPTER W/CHROME NUT & WASHER(HUB×SJ) |
|||||||
| LN104W-020 2" | LN104W-212 1-1/2×1-1/4" | ||||||
|
TRAP ADAPTER W/PLASTIC NUT (SPG×SJ) |
|||||||
| LN103P-012 1-1/4" | LN103P-015 1-1/2" | LN103P-212 1-1/2×1-1/4" | |||||
|
TRAP ADAPTER W/PLASTIC NUT(HUB×SJ) |
|||||||
| LN104P-012 1-1/4" | LN104P-015 1-1/2" | LN104P-212 1-1/2×1-1/4" | |||||
|
TRAY PLUG ADAPTER |
|||||||
| LN900-015 1-1/2" | |||||||
|
TRAY PLUG ADAPTER - SPIGOT |
|||||||
| LN130X-015 1-1/2" | |||||||
|
TWO-WAY CLEANOUT(HUB×HUB×HUB) |
|||||||
| LN448-030 3" | LN448-040 4" | ||||||
|
UNION(HUB×HUB) |
|||||||
| LN126-015 1-1/2" | LN126-020 2" | LN126-030 3" | LN126-040 4" | ||||
|
VENT TEE(HUB×HUB×HUB) |
|||||||
| LN441-015 1-1/2" | LN441-020 2" | LN441-030 3" | LN441-040 4" | ||||
| LN441-337 3"×3"×1-1/2" | LN441-338 3"×3"×1-1/2" | ||||||
# This product may be marked with an alternate trade name: Liansu.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[1] Figure numbers may have the following prefix used to identify retail packaging
requirements: R
[2] XXX - Size
012 - 1 1/4"
015 - 1 1/2"
020 - 2"
030 - 3"
040 - 4"
060 - 6"
080 - 8"
100 - 10"
120 - 12"
169 - 1 1/4" x 1 1/2"
212 - 1 1/2" x 1 1/4"
213 - 1 1/2" x 2"
241 - 2" × 1 1/2" × 1 1/2" or 2" × 1 1/2" × 1 1/2" × 1 1/2"
251 - 2" × 1 1/2" or 2" × 2" × 1 1/2" × 1 1/2"
253 - 2" x 3"
337 - 3" × 1 1/2" or 3" × 3" × 1 1/2" or 3" × 3" × 3" × 1 1/2"
338 - 3" × 2" or 3" × 3" × 2" or 3" × 3" × 3" × 2"
342 - 3" x 4"
415 - 4" × 4" × 1/2"
420 - 4" × 2" or 4" × 4" × 2" or 4" × 4" × 4" × 2"
422 - 4" × 3" or 4" × 4" × 3" or 4" × 4" × 4" × 3"
532 - 6" × 4" or 6" × 6" × 4" or 6" × 6" × 6" × 4"
582 - 8" × 4" or 8" × 8" × 4" or 8" × 8" × 8" × 4"
585 - 8" × 6" or 8" × 8" × 6" or 8" × 8" × 8" × 6"
626 - 10" × 6" or 10" × 10" × 6" or 10" × 10" × 10" × 6"
628 - 10" × 8" or 10" × 10" × 8" or 10" × 10" × 10" × 8"
670 - 12" × 10" or 12" × 12" × 10" or 12" × 12" × 12" × 10"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
|||||||
Fittings# ¢ § [1] [2] [G] |
ABS |
Lesso |
CSA B181.1 |
||||
|
22½° ELBOW(HUB×HUB) |
|||||||
| LN324-015 1-1/2" | LN324-020 2" | LN324-030 3" | LN324-040 4" | ||||
| LN324-060 6" | |||||||
|
22½° STREET ELBOW(HUB×SPG) |
|||||||
| LN326-015 1-1/2" | LN326-020 2" | LN326-030 3" | LN326-040 4"f | ||||
|
45° STREET WYE (SPG×HUB×HUB) |
|||||||
| LN602-015 1 1/2" | LN602-020 2" | LN602-030 3" | LN602-040 4" | ||||
|
45° REDUCING DOUBLE WYE(ALL HUB) |
|||||||
| LN612-251 2 x 2 x 1-1/2 x 1-1/2" | LN612-337 3 x 3 x 1-1/2 x 1-1/2" | LN612-338 3×3×2×2" | LN612-420 4 x 4 x 2 x 2" | ||||
| LN612-422 4 x 4 x 3 x 3" | LN612-532 6 x 6 x 4 x 4" | ||||||
|
45° REDUCING STREET WYE(SPG×HUB×HUB) |
|||||||
| LN603-251 2 x 2 x 1-1/2" | LN603-337 3 x 3 x 1-1/2" | LN603-338 3 x 3 x 2" | LN603-420 4 x 4 x 2" | ||||
| LN603-422 4 x 4 x 3" | |||||||
|
45° REDUCING WYE(HUB×HUB×HUB) |
|||||||
| LN601-241 2×1-1/2×1-1/2" | LN601-251L 2×2×1-1/2" | LN601-251 2×1-1/2×1-1/2" | LN601-337L 3×3×1-1/2" | ||||
| LN601-337 2×1-1/2×1-1/2" | LN601-338L 3×3×2" | LN601-338 2×1-1/2×1-1/2" | LN601-419 4 x 4 x 1-1/2" | ||||
| LN601-420L 4×4×2" | LN601-420 2×1-1/2×1-1/2" | LN601-422L 4×4×3" | LN601-422 2×1-1/2×1-1/2" | ||||
| LN601-530 6 x 6 x 3" | LN601-532 6×6×4" | ||||||
|
45° STREET ELBOW (HUB×SPG) |
|||||||
| LN323-012 1-1/4" | LN323-015 1-1/2" | LN323-020L 2" | LN323-030L 3" | ||||
| LN323-040 4" | LN323-060 6" | ||||||
|
45° STREET ELBOW-SHORT TURN (HUB×SPG) |
|||||||
| LN323-015S 1-1/2" | LN323-020S 2" | LN323-030S 3" | LN323-040S 4" | ||||
|
45° WYE (HUB×HUB×HUB) |
|||||||
| LN600-012 1-1/4" | LN600-015L 1-1/2" | LN600-015 1-1/2" | LN600-020L 2" | ||||
| LN600-020 2" | LN600-030L 3" | LN600-030 3" | LN600-040L 4" | ||||
| LN600-040 4" | LN600-060 6" | ||||||
|
45°DOUBLE WYE(ALL HUB) |
|||||||
| LN611-015 1-1/2" | LN611-020 2" | LN611-030L 3" | LN611-030 3" | ||||
| LN611-040 4" | |||||||
|
45°ELBOW (HUB×HUB) |
|||||||
| LN321-012 1-1/4" | LN321-015 1-1/2" | LN321-020L 2" | LN321-030L 3" | ||||
| LN321-040 4" | LN321-060 6" | ||||||
|
45°ELBOW-SHORT TURN (HUB×HUB) |
|||||||
| LN321-015S 1-1/2" | LN321-020S 2" | LN321-030S 3" | LN321-040S 4" | ||||
|
45°WYE(HUB×HUB×HUB) |
|||||||
| LN601-209 1-1/2×1-1/2"×1/2" | LN601-210 1-1/2×1-1/2"×3/4" | ||||||
|
60° STREET ELBOW (HUB×SPG) |
|||||||
| LN320-015 1-1/2" | LN320-020 2" | LN320-030 3" | LN320-040 4" | ||||
|
60°ELBOW(HUB×HUB) |
|||||||
| LN319-015 1-1/2" | LN319-020 2" | LN319-030 3" | LN319-040 4" | ||||
|
90° LONG SWEEP ELBOW,STREET(HUB×SPG) |
|||||||
| LN309-020 2" | LN309-030 3" | LN309-040 4" | |||||
|
90° REDUCING CLOSET ELBOW(HUB×HUB) |
|||||||
| LN329-422 4×3" | |||||||
|
90° REDUCING CLOSET STREET ELBOW (HUB×SPG) |
|||||||
| LN330-342 3 x 4" | LN330-422 4 x 3" | ||||||
|
90° STREET ELBOW (HUB×SPG) |
|||||||
| LN302-012 1-1/4" | LN302-015 1-1/2" | LN302-020 2" | LN302-030 3" | ||||
| LN302-040 4" | LN302-060 6" | ||||||
|
90° STREET ELBOW W/ LOW HEEL INLET (HUB×SPG×HUB) |
|||||||
| LN310-338 3 x 3 x 2" | |||||||
|
90° STREET ELBOW-SHORT TURN (HUB×SPG) |
|||||||
| LN302-015S 1-1/2" | LN302-020S 2" | LN302-030S 3" | LN302-040S 4" | ||||
|
90° VENT ELBOW(HUB×HUB) |
|||||||
| LN331-012 1-1/4" | LN331-015 1-1/2" | LN331-020 2" | LN331-030 3" | ||||
| LN331-040 4" | |||||||
|
90°ELBOW (HUB×HUB) |
|||||||
| LN300-012 1-1/4" | LN300-015 1-1/2" | LN300-020 2" | LN300-030 3" | ||||
| LN300-040 4" | LN300-060 6" | ||||||
|
90°ELBOW W/ LOW HEEL INLET (HUB×HUB×HUB) |
|||||||
| LN303-337 3 x 3 x 1-1/2" | LN303-338 3 x 3 x 2" | LN303-420 4 x 4 x 2" | LN304-012 1-1/4" | ||||
| LN304-015 1-1/2" | LN304-020 2" | LN304-030 3" | LN304-040 4" | ||||
|
90°ELBOW WITH SIDE INLET (HUB×HUB×HUB) |
|||||||
| LN300S-337 3 x 3 x 1-1/2" | LN300S-338 3 x 3 x 2" | ||||||
|
90°ELBOW-SHORT TURN (HUB×HUB) |
|||||||
| LN300-012S 1-1/4" | LN300-015S 1-1/2" | LN300-020S 2" | LN300-030S 3" | ||||
| LN300-040S 4" | LN300-060S 6" | ||||||
|
90°REDUCING CLOSET ST ELBOW W/ TEST CAP (HUB×SPG) |
|||||||
| LN330X-342 3 x 4" | LN330X-422 4 x 3" | ||||||
|
ABS-COPPER ADAPTER (HUB×SJ) |
|||||||
| LN120-015 1-1/2" | LN120-212 1-1/2×1-1/4" | ||||||
|
CAP(HUB) |
|||||||
| LN116-012 1-1/4" | LN116-015 1-1/2" | LN116-020 2" | LN116-030 3" | ||||
| LN116-040 4" | |||||||
|
CLEANOUT ADAPTER (SPG×FIPT) |
|||||||
| LN105-012 1-1/4" | LN105-015 1-1/2" | LN105-020 2" | LN105-030 3" | ||||
| LN105-040 4" | LN105-060 6" | ||||||
|
CLEANOUT ADAPTER W/PLUG(SPG×CLEANOUT W/PLUG) |
|||||||
| LN105X-012 1-1/4" | LN105X-015 1-1/2" | LN105X-020 2" | LN105X-030 3" | ||||
| LN105X-040 4" | LN105X-060 6" | ||||||
|
CLEANOUT PLUG(MIPT) |
|||||||
| LN106-015 1-1/2" | LN106-020 2" | LN106-025 2-1/2" | LN106-030 3" | ||||
| LN106-035 3-1/2" | LN106-040 4" | ||||||
|
CLEANOUT WYE (HUB×HUB×FIPT) |
|||||||
| LN604-015 1-1/2" | |||||||
|
CLOSET FLANGE W/ADJUSTABLE METAL RING (H) |
|||||||
| LN811-040 4" | |||||||
|
CLOSET FLANGE W/ADJUSTABLE METAL RING (S) |
|||||||
| LN811-040 4"×4" | |||||||
|
CLOSET FLANGE W/ KNOCKOUT TEST PLUG(HUB) |
|||||||
| LN800T-040 4 x 4" | LN800T-422L 4 x 3" | LN800T-422 4 x 3" | |||||
|
CLOSET FLANGE W/ PIPE STOP(HUB) |
|||||||
| LN815PS-040 4 x 4 / 4 x 3 | |||||||
|
CLOSET FLANGE W/ADJUSTABLE PLASTIC RING(HUB) |
|||||||
| LN810P-040 4 x 4" | |||||||
|
CLOSET FLANGE W/ADJUSTABLE PLASTIC RING(SPG) |
|||||||
| LN812P-040 4 x 4" | LN812P-422 4 x 3" | ||||||
|
CLOSET FLANGE W/KONCKOUT & PIPE STOP(HUB) |
|||||||
| LN815K-040 4 x 4 / 4 x 3 | |||||||
|
CLOSET FLANGE W/RING-PULL TEST PLUG(HUB) |
|||||||
| LN800R-040 4 x 4" | LN800R-422L 4 x 3" | LN800R-422 4 x 3" | |||||
|
CLOSET FLANGE W/THREADED TEST PLUG(HUB) |
|||||||
| LN800T-040C 4" | LN800T-422CL 4 x 3" | LN800T-422C 4 x 3" | |||||
|
CLOSET FLANGE(FIPT) |
|||||||
| LN830-422 4 x 3 | |||||||
|
CLOSET FLANGE(HUB) |
|||||||
| LN800-040 4×4" | LN800-422L 4×3" | LN800-422 4×3" | |||||
|
CLOSET FLANGE(MIPT) |
|||||||
| LN831-422 4 x 3" | |||||||
|
COMBINATION WYE & 1/8 BEND(ONE PIECE)(HUB×HUB×HUB) |
|||||||
| LN501-015 1-1/2" | LN501-020 2" | LN501-030 3" | LN501-040 4" | ||||
|
COMBINATION WYE & 1/8 BEND(TWO PIECE)(HUB×HUB×HUB) |
|||||||
| LN503-020 2" | |||||||
|
COUPLING (HUB×HUB) |
|||||||
| LN100-012 1-1/4" | LN100-015 1-1/2" | LN100-020 2" | LN100-030 3" | ||||
| LN100-040 4" | LN100-060 6" | ||||||
|
DOUBLE 90° ELBOW(HUB×HUB×HUB) |
|||||||
| LN327-015 1-1/2" | LN327-020 2" | LN327-030 3" | LN327-040 4" | ||||
| LN327-241 2 x 1-1/2 x 1-1/2" | |||||||
|
DOUBLE FIXTURE FITTING(ALL HUB) |
|||||||
| LN500-020 2" | LN500-030 3" | LN500-241 2 x 1-1/2 x 1-1/2 x 1-1/2" | LN500-251 2"×2"×1-1-2"×1-1-2" | ||||
| LN500-257 2 x 1-1/2 x 2 x 2" | LN500-338 3 x 2 x 3 x 3" | ||||||
|
DOUBLE SANITARY TEE W / R & L SIDE INLET(ALL HUB) |
|||||||
| LN439-338 3 x 3 x 3 x 3 x 2 x 2" | |||||||
|
DOUBLE SANITARY TEE W /SIDE INLET(ALL HUB) |
|||||||
| LN438-337 3 x 3 x 3 x 3 x1-1/ 2" | LN438-338 3 x 3 x 3 x 3 x 2" | LN438-420 4 x 4x 4 x 4 x 2" | |||||
|
DOUBLE SANITARY TEE(ALL HUB) |
|||||||
| LN428-015 1-1/2" | LN428-020 2" | LN428-030 3" | LN428-040 4" | ||||
|
DRUM TRAP W / CLEANOUT |
|||||||
| LN702X-363 3 x 6 x 1-1/2" | |||||||
|
EXPANSION JOINT(HUB×HUB) |
|||||||
| LNH119-015 1-1/2" | LNH119-020 2" | LNH119-030 3" | LNH119-040 4" | ||||
|
EXPANSION JOINT(HUB×SPG) |
|||||||
| LNH119S-030 3" | |||||||
|
FEMALE ADAPTER (HUB×FIPT) |
|||||||
| LN101-012 1-1/4" | LN101-015 1-1/2" | LN101-020 2" | LN101-030 3" | ||||
| LN101-040 4" | LN101-060 6" | ||||||
|
FLUSH ADAPTER (SPG×FIPT) |
|||||||
| LN108-209 1-1/2×1/2" | LN108-210 1-1/2×3/4" | LN108-212 1-1/2 x 1-1/4" | LN108-251 2 x 1-1/2" | ||||
| LN108-337 3×1-1/2" | LN108-338 3x 2" | LN108-422 4x3" | |||||
|
FLUSH BUSHING(SPG×HUB) |
|||||||
| LN107-212 1-1/2×1-1/4" | LN107-251 2×1-1/2" | LN107-337 3×1-1/2" | LN107-338 3×2" | ||||
| LN107-419 4×1-1/2" | LN107-420 4×2" | LN107-422 4×3" | LN107-532 6×4" | ||||
|
FLUSH C.O. PLUG(MPT) |
|||||||
| LN110-020 2" | LN110-030 3" | LN110-040 4" | |||||
|
FLUSH CLOSET FLANGE (INSIDE 4", OUTSIDE 3") |
|||||||
| LN815-040 4 x 4 / 4 x 3 | |||||||
|
HUB ADAPTER CAST IRON (HUB×SJ) |
|||||||
| LN123-020 2" | LN123-030 3" | LN123-040 4" | |||||
|
HUB ADAPTER CAST IRON INCREASER(HUB×SJ) |
|||||||
| LN123R-213 1-1/2 x 2" | LN123R-342 3 x 4" | ||||||
|
LA PATTERN P-TRAP W/UNION&PLASTIC NUT(HUB×SJ) |
|||||||
| LN711M-015 1-1/2" | LN711M-212 1-1/2 x 1-1/4" | ||||||
|
MALE ADAPTER(HUB×MIPT) |
|||||||
| LN109-012 1-1/4" | LN109-015 1-1/2" | LN109-020 2" | LN109-030 3" | ||||
| LN109-040 4" | LN109-212 1-1/2×1-1/4" | ||||||
|
MALE ADAPTER(SPG×MIPT) |
|||||||
| LN111-012 1-1/4" | LN111-015 36893 | LN111-020 2" | LN111-030 3" | ||||
| LN111-040 4" | LN111-212 1-1/2×1-1/4" | ||||||
|
NO-HUB ADAPTER(SPG×HUB) |
|||||||
| LN119-020 2" | LN119-030 3" | LN119-040 4" | LN119-251 2 x 1-1/2" | ||||
| LN119-422 4 x 3" | |||||||
|
P-TRAP W/PLUG(HUB×HUB×CLEANOUT W/PLUG) |
|||||||
| LN707X-015 1-1/2" | LN707X-020 2" | ||||||
|
P-TRAP W/UNION &C/O(HUB×HUB×C/O) |
|||||||
| LN712-015 1-1/2" | |||||||
|
P-TRAP W/UNION JOINT(HUB×HUB) |
|||||||
| LN708P-012 1-1/4" | LN708P-015 1-1/2" | LN708P-020 2" | |||||
|
P-TRAP(HUB×HUB) |
|||||||
| LN706X-015 1-1/2" | LN706X-020 2" | LN706X-030 3" | LN706X-040 4" | ||||
|
PIPE INCREASER-REDUCER (HUBxHUB) |
|||||||
| LN102-212 1-1/2×1-1/4" | LN102-251 2×1-1/2" | LN102-337 3×1-1/2" | LN102-338 3×2" | ||||
| LN102-419 4×1-1/2" | LN102-420L 4×2" | LN102-420 4 x 2" | LN102-422L 4×3" | ||||
| LN102-422 4×3" | |||||||
|
PLUG WITH GASKET(MIPT) |
|||||||
| LN106R-012 1-1/4" | LN106R-015 1-1/2" | LN106R-020 2" | LN106R-025 2-1/2" | ||||
| LN106R-030 3" | LN106R-035 2-1/2" | LN106R-040 4" | LN106R-060 6" | ||||
|
REDUCING CLOSET FLANGE(SPG) |
|||||||
| LN801-422 4 x 3" | |||||||
|
REDUCING COMBINATION WYE & 1/8 BEND(HUB×HUB×HUB) |
|||||||
| LN502-241 2 x 1-1/2 x 1-1/2" | LN502-251 2 x 2 x 1-1/2" | LN502-257 2 x 1-1/2 x 2" | LN502-337 3 x 3 x 1-1/2" | ||||
| LN502-338 3 x 3 x 2" | LN502-420 4 x 4 x 2" | LN502-422 4 x 4 x 3" | |||||
|
REDUCING DOUBLE SANITARY TEE(ALL HUB) |
|||||||
| LN429-251 2×2×1-1/2×1-1/2" | LN429-337 3×3×1-1/2×1-1/2" | LN429-338 3 x 3 x 2 x 2" | LN429-420 4 x 4 x 2 x 2" | ||||
| LN429-422 4 x 4 x 3 x 3" | LN429-323 3 x 3 x 2 x 1-1/2" | ||||||
|
REDUCING SANITARY TEE(HUB×HUB×HUB) |
|||||||
| LN401-222 1-1/2 x 1-1/4 x 1-1/4" | LN401-212 1-1/2 x 1-1/2 x 1-1/4" | LN401-225 1-1/2 x 1-1/4 x 1-1/2" | LN401-241L 2×1-1/2×1-1/2" | ||||
| LN401-241 3×3×2" | LN401-251L 2×2×1-1/2" | LN401-251 3×3×2" | LN401-257L 2×1-1/2×2" | ||||
| LN401-257 3×3×2" | LN401-337 3×3×1-1/2" | LN401-338L 3×3×2" | LN401-338 3×3×2" | ||||
| LN401-419 4 x 4 x 1-1/2" | LN401-420 4×4×2" | LN401-422 4×4×3" | LN401-532 6 x 6 x 4" | ||||
|
REDUCING STREET SANITARY TEE(SPG×HUB×HUB) |
|||||||
| LN404-241 2×1-1/2×1-1/2" | LN404-251 2×2×1-1/2" | LN404-257 2×1-1/2×2" | LN404-337 3×3×1-1/2" | ||||
| LN404-338 3 x 3 x 2" | |||||||
|
REPAIR COUPLING(HUB×HUB) |
|||||||
| LN130-015 1-1/2" | LN130-020 2" | LN130-030 3" | LN130-040 4" | ||||
|
RETURN BEND(HUB×HUB) |
|||||||
| LN700-015 1-1/2" | LN700-020 2" | LN700-030 3" | LN700-040 4" | ||||
|
RETURN BEND(HUB×HUB×CLEANOUT W/PLUG) |
|||||||
| LN701-015 1-1/2" | LN701-020 2" | ||||||
|
SANITARY TEE W / LEFT SIDE INLET(ALL HUB) |
|||||||
| LN416-337 3 x 3 x 3 x 1-1/2" | LN416-338 3 x 3 x3 x 2" | LN416-329 3 x 3 x 2 x 2" | LN416-420 4 x 4 x 4 x 2" | ||||
| LN417-337 3 x 3 x 3 x 1-1/2" | LN417-338 3 x 3 x3x 2" | LN417-329 3 x 3 x 2 x 2" | LN417-420 4 x 4 x 4 x 2" | ||||
|
SANITARY TEE W / R& L SIDE INLET(ALL HUB) |
|||||||
| LN418-337 3 x 3 x 3 x 1-1/2 x 1-1/2" | LN418-338 3 x 3 x 3 x 2 x 2" | LN418-420 4"×4"×4"×2"×2" | |||||
|
SANITARY TEE(HUB×HUB×HUB) |
|||||||
| LN400-012L 1-1/4" | LN400-012 1-1/4" | LN400-015L 1-1/2" | LN400-015 1-1/2" | ||||
| LN400-020L 2" | LN400-020 2" | LN400-030 3" | LN400-040L 4" | ||||
| LN400-040 4" | LN400-060 6" | ||||||
|
SEWER & DRAIN ADAPTER (HUBxHUB) |
|||||||
| LN117-422 4×3" | LN117-342 3 x 4" | ||||||
|
SLIP PLUG (SPG) |
|||||||
| LN110S-015 1-1/2" | LN110S-020 2" | LN110S-025 2-1/2" | LN110S-030 3" | ||||
| LN110S-035 3-1/2" | LN110S-040 4" | ||||||
|
STREET SANITARY TEE(SPG×HUB×HUB) |
|||||||
| LN403-015 1-1/2" | LN403-020 2" | LN403-030 3" | LN403-040 4" | ||||
|
TEST TEE(HUBxHUBxFIPT) |
|||||||
| LN445-015 1 -1/2" | LN445-015L 1 -1/2" | LN445-020 2" | LN445-020L 2" | ||||
| LN445-030 3" | LN445-030L 3" | LN445-040 4" | LN445-040L 4" | ||||
| LN445-427 4×3×4" | |||||||
|
TEST TEE(HUB×HUB×CLEANOUT W/PLUG) |
|||||||
| LN444X-427 4×3×4" | LN444X-015L 4×3×4" | LN444X-015 4×3×4" | LN444X-020L 4×3×4" | ||||
| LN444X-020 4×3×4" | LN444X-030L 4×3×4" | LN444X-030 4×3×4" | LN444X-040L 4×3×4" | ||||
| LN444X-040 4×3×4" | |||||||
|
THREADED CAP (FIPT) |
|||||||
| LN135-015 1-1/2" | LN135-020 2" | LN135-030 3" | |||||
|
TRAP ADAPTER (HUB x SJ) |
|||||||
| LN104-012 1-1/4" | LN104-015 1-1/2" | LN104-020 2" | LN104-212 1-1/2" X 1-1/4" | ||||
|
TRAP ADAPTER (SPGXSJ) |
|||||||
| LN103-012 1-1/4" | LN103-015 1-1/2" | LN103-020 2" | LN103-212 1-1/2" X 1-1/4" | ||||
|
TRAP ADAPTER W/ PLASTIC NUT & WASHER(HUB×SJ) |
|||||||
| LN104X-012 1-1/4" | LN104X-015 1-1/2" | LN104X-020 2" | LN104X-212 1-1/2×1-1/4" | ||||
|
TRAP ADAPTER W/ PLASTIC NUT & WASHER(SPG×SJ) |
|||||||
| LN103X-012 1-1/4" | LN103X-015 1-1/2" | LN103X-020 2" | LN103X-212 1-1/2×1-1/4" | ||||
|
TRAP ADAPTER W/CHROME NUT & WASHER (SPG×SJ) |
|||||||
| LN103W-015 1-1/2" | LN103W-020 2" | LN103W-212 1-1/2×1-1/4" | |||||
|
TRAP ADAPTER W/CHROME NUT & WASHER(HUB×SJ) |
|||||||
| LN104W-020 2" | LN104W-212 1-1/2×1-1/4" | ||||||
|
TRAP ADAPTER W/PLASTIC NUT (SPG×SJ) |
|||||||
| LN103P-012 1-1/4" | LN103P-015 1-1/2" | LN103P-212 1-1/2×1-1/4" | |||||
|
TRAP ADAPTER W/PLASTIC NUT(HUB×SJ) |
|||||||
| LN104P-012 1-1/4" | LN104P-015 1-1/2" | LN104P-212 1-1/2×1-1/4" | |||||
|
TRAY PLUG ADAPTER |
|||||||
| LN900-015 1-1/2" | |||||||
|
TRAY PLUG ADAPTER - SPIGOT |
|||||||
| LN130X-015 1-1/2" | |||||||
|
TWO-WAY CLEANOUT(HUB×HUB×HUB) |
|||||||
| LN448-030 3" | LN448-040 4" | ||||||
|
UNION(HUB×HUB) |
|||||||
| LN126-015 1-1/2" | LN126-020 2" | LN126-030 3" | LN126-040 4" | ||||
|
VENT TEE(HUB×HUB×HUB) |
|||||||
| LN441-015 1-1/2" | LN441-020 2" | LN441-030 3" | LN441-040 4" | ||||
| LN441-337 3"×3"×1-1/2" | LN441-338 3"×3"×1-1/2" | ||||||
# This product may be marked with an alternate trade name: Liansu.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[1] Figure numbers may have the following prefix used to identify retail packaging
requirements: R
[2] XXX - Size
012 - 1 1/4"
015 - 1 1/2"
020 - 2"
030 - 3"
040 - 4"
060 - 6"
080 - 8"
100 - 10"
120 - 12"
169 - 1 1/4" x 1 1/2"
212 - 1 1/2" x 1 1/4"
213 - 1 1/2" x 2"
241 - 2" × 1 1/2" × 1 1/2" or 2" × 1 1/2" × 1 1/2" × 1 1/2"
251 - 2" × 1 1/2" or 2" × 2" × 1 1/2" × 1 1/2"
253 - 2" x 3"
337 - 3" × 1 1/2" or 3" × 3" × 1 1/2" or 3" × 3" × 3" × 1 1/2"
338 - 3" × 2" or 3" × 3" × 2" or 3" × 3" × 3" × 2"
342 - 3" x 4"
415 - 4" × 4" × 1/2"
420 - 4" × 2" or 4" × 4" × 2" or 4" × 4" × 4" × 2"
422 - 4" × 3" or 4" × 4" × 3" or 4" × 4" × 4" × 3"
532 - 6" × 4" or 6" × 6" × 4" or 6" × 6" × 6" × 4"
582 - 8" × 4" or 8" × 8" × 4" or 8" × 8" × 8" × 4"
585 - 8" × 6" or 8" × 8" × 6" or 8" × 8" × 8" × 6"
626 - 10" × 6" or 10" × 10" × 6" or 10" × 10" × 10" × 6"
628 - 10" × 8" or 10" × 10" × 8" or 10" × 10" × 10" × 8"
670 - 12" × 10" or 12" × 12" × 10" or 12" × 12" × 12" × 10"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
|||||||
Fittings# [3] |
PVC |
Lesso |
ASTM D3034 |
||||
|
1/16 Bend (H × H) |
|||||||
| LSW324-030 (3") | LSW324-040 (4") | LSW324-060 (6") | LSW324-080 (8") | ||||
|
1/16 Bend, Street (S × H) |
|||||||
| LSW326-030 (3") | LSW326-040 (4") | LSW326-060 (6") | LSW326-080 (8") | ||||
|
1/4 Bend (H × H) |
|||||||
| LSW300-030 (3") | LSW300-040 (4") | LSW300-060 (6") | LSW300-080 (8") | ||||
|
1/4 Bend, Street (S × H) |
|||||||
| LSW302-040 (4") | LSW302-060 (6") | LSW302-080 (8") | |||||
|
1/8 Bend (H × H) |
|||||||
| LSW321-020 (2") | LSW321-030 (3") | LSW321-040 (4") | LSW321-060 (6") | ||||
| LSW321-080 (8") | |||||||
|
1/8 Bend, Street (S × H) |
|||||||
| LSW323-030 (3") | LSW323-040 (4") | LSW323-060 (6") | LSW323-080 (8") | ||||
|
Adapter Bushing (DWV Spigot × HUB) |
|||||||
| LP118-030 (3" x 3") | LP118-040 (4" x 4") | LP118-060 (6" x 6") | |||||
|
Adapter Bushing (Sewer SPGxDWV Hub) |
|||||||
| LP117X-337 (3" x 2") | LP117X-338 (3" x 2") | LP117X-437 (4" x 2") | LP117X-420 (4" x 2") | ||||
| LP117X-422 (4" x 3") | LP117X-040 (4" x 4") | LP117X-532 (6" x 4") | LP117X-060 (6" x 6") | ||||
|
Adapter Coupling (Sewer HUB × DWV HUB) |
|||||||
| LP117-338 (3" x 2") | LP117-422 (4" x 3") | LP117-040 (4" x 4") | LP117-532 (6" x 4") | ||||
| LP117-060 (6" x 6") | |||||||
|
Cap (HUB) |
|||||||
| LSW116-030 (3") | LSW116-040 (4") | LSW116-060 (6") | LSW116-080 (8") | ||||
|
Cleanout Plug (MPT) |
|||||||
| LSW106-030 (3") | LSW106-040 (4") | LSW106-060 (6") | LSW106-080 (8") | ||||
|
Cleanout Tee (H × H × FPT) |
|||||||
| LSW445-040 (4") | |||||||
|
Coupling (H × H) |
|||||||
| LSW100-030 (3") | LSW100-040 (4") | LSW100-060 (6") | LSW100-080 (8") | ||||
|
Downspout Adapter (DOWNSPOUTxSEWER HUB,HxH) |
|||||||
| LSW217-0233 (2" x 3" x 3") | LSW217-0234 (2" x 3" x 4") | LSW217-0343 (3" x 3") | LSW217-0344 (3" x 4" x 4") | ||||
|
Drain Grate (SPG) |
|||||||
| LSW299-030 (3") | LSW299-040 (4") | LSW299-060 (6") | LSW299-080 (8") | ||||
|
Extended Reducer Bushing (SPGxH) |
|||||||
| LSW117XE-532 (6" x 4") | LSW117XE-582 (8" x 4") | LSW117XE-585 (8" x 6") | |||||
|
Female Adapter (FPT × H) |
|||||||
| LSW101-030 (3") | LSW101-040 (4") | LSW101-060 (6") | LSW101-080 (8") | ||||
|
Fitting Cleanout Adapter (S × FPT) |
|||||||
| LSW105-030 (3") | LSW105-040 (4") | LSW105-060 (6") | LSW105-080 (8") | ||||
|
Fitting Cleanout Adapter W/ C.O. Plug (S × FPT) |
|||||||
| LSW105X-030 (3") | LSW105X-040 (4") | LSW105X-060 (6") | |||||
|
Flush Downspout Adapater(DOWNSPOUTxSEWER HUB, HxH) |
|||||||
| LSW218-0233 (2" x 3" x 3") | LSW218-0234 (2" x 3" x 4") | LSW218-0344 (3" x 4" x 4") | LSW218-0466 (4" x 6" x 6") | ||||
|
Long Sweep 1/4 Bend (H × H) |
|||||||
| LSW304-030 (3") | LSW304-040 (4") | LSW304-060 (6") | LSW304-080 (8") | ||||
|
Long Sweep 1/4 Bend, Street (S ×H) |
|||||||
| LSW309-030 (3") | LSW309-040 (4") | ||||||
|
Male Adapter (MPT × H) |
|||||||
| LSW109-030 (3") | LSW109-040 (4") | ||||||
|
Pipe Increaser-Reducer (H × H) |
|||||||
| LSW102-338 (3" x 2") | LSW102-422 (4" x 3") | LSW102-532 (6" x 4") | LSW102-582 (8" x 4") | ||||
|
Reducing Bushing (S × H) |
|||||||
| LSW107-338 (3" x 2") | LSW107-422 (4" x 3") | ||||||
|
Reducing Double Wye (All Hub) |
|||||||
| LSW612-532 (6" x 4") | |||||||
|
Reducing Sanitary Tee (All Hub) |
|||||||
| LSW400-532 (6" x 4") | |||||||
|
Reducing Tee (All Hub) |
|||||||
| LSW441-422 (4" x 3") | LSW441-532 (6" x 4") | LSW441-582 (8" x 4") | LSW441-585 (8" x 6") | ||||
|
Reducing Wye (All Hub) |
|||||||
| LSW601-338 (3" x 2") | LSW601-422 (4" x 3") | LSW601-532 (6" x 4") | LSW601-582 (8" x 4") | ||||
| LSW601-585 (8" x 6") | |||||||
|
Repair Coupling (H × H) |
|||||||
| LSW130-040 (4") | LSW130-060 (6") | ||||||
|
Sanitary Tee (ALL HUB) |
|||||||
| LSW400-030 (3") | LSW400-040 (4") | LSW400-060 (6") | LSW400-080 (8") | ||||
|
Tee (All Hub) |
|||||||
| LSW441-030 (3") | LSW441-040 (4") | LSW441-060 (6") | LSW441-080 (8") | ||||
|
Wye (All Hub) |
|||||||
| LSW600-030 (3") | LSW600-040 (4") | LSW600-060 (6") | LSW600-080 (8") | ||||
|
Wye, Street (S × H × H) |
|||||||
| LSW602-040 (4") | |||||||
# This product may be marked with an alternate trade name: Liansu.
[3] Figure numbers may have one of the following optional prefixes used to identify retail
packaging requirements: URP, U, UTP, USP, UPP, UP, UMP, UHP, UBP, PP, MPP, RP, MRP,
RLN, LN, RS, MRR, RL, CPRLN, or RLR.
|
|||||||
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | ||||
Fittings# + § [1] [G] |
PVC |
LESSO |
ASTM D2466 |
||||
|
45° STREET ELL (SPIG × SOC) |
|||||||
| 3/4"- 2" (427-xxx) | |||||||
|
45°ELL (SOC × SOC) |
|||||||
| 1/2"- 5" (417-xxx) | |||||||
|
90° ELL (SOC X FIPT) |
|||||||
| 1/2"(407-005) | |||||||
|
90°ELL (SOC × SOC) |
|||||||
| 1/2" -6" (406-xxx) | |||||||
|
90°REDUCING ELL (SOC × FIPT) |
|||||||
| 3/4×1/2"- 1×3/4" (407-xxx) | |||||||
|
90°REDUCING ELL (SOC × SOC) |
|||||||
| 1-1/2×1/2" (406-209) | |||||||
|
90°STREET ELL (MIPT X SOC) |
|||||||
| 3/4"-1" (410-xxx) | |||||||
|
90°STREET ELL (SPIG × SOC) |
|||||||
| 3/4"- 2-1/2" (409-xxx) | |||||||
|
90°SWEEP ELL (SOC × SOC) |
|||||||
| 2"-3" (406-xxxS) | |||||||
|
CAP (FIPT) |
|||||||
| 3/4" （448-007) | |||||||
|
CAP (SOC) |
|||||||
| 1/2"- 4" （447-xxx) | |||||||
|
COUPLING (SOC X SOC) |
|||||||
| 1/2"- 8" （429-xxx) | |||||||
|
FEMALE ADAPTER (SOC × FIPT) |
|||||||
| 1/2"- 2" （435-xxx) | |||||||
|
INSERT ADAPTER (INSERT × SOC） |
|||||||
| 3/4" （474-007) | |||||||
|
MALE ADAPTER (MIPT × SOC) |
|||||||
| 1/2"- 4" （436-xxx) | |||||||
|
PLUG (MIPT) |
|||||||
| 1" （450-010) | |||||||
|
PLUG (SPIG) |
|||||||
| 1/2"- 1-1/2" （447-xxx) | |||||||
|
REDUCING BUSHING FLUSH STYLE (SPIG × FIPT) |
|||||||
| 1/2×1/8"- 2×3/4" （438-xxx) | |||||||
|
REDUCING BUSHING FLUSH STYLE (SPIG × SOC) |
|||||||
| 3/4×1/2"- 6×4" （437-xxx) | |||||||
|
REDUCING MALE ADAPTER (MIPT×SOC) |
|||||||
| 3/4"×1" （436-102) | |||||||
|
REDUCING T.T. BUSHING FLUSH STYLE (MIPT×FIPT) |
|||||||
| 3/4×1/2" （439-101) | |||||||
|
REDUCING TEE (SOC X SOC X FIPT) |
|||||||
| 3/4×3/4×1/2" - 2×2×1/2" (402-xxx) | |||||||
|
REDUCING TEE (SOC × SOC × SOC) |
|||||||
| 2×2×1-1/2" - 2-1/2×2-1/2×2" (401-xxx) | |||||||
|
TEE (SOC X SOC X FIPT) |
|||||||
| 1/2" (402-005) | |||||||
|
TEE (SOC X SOC X SOC) |
|||||||
| 1/2"-6" (401-xxx) | |||||||
|
WYE (SOC X SOC X SOC) |
|||||||
| 2-1/2" （475-025) | |||||||
# This product may be marked with an alternate trade name: Liansu.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[1] Figure numbers may have the following prefix used to identify retail packaging
requirements: R
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
|||||||
Fittings# + ¢ [1] [G] |
PVC |
LESSO |
CSA B137.3 |
||||
|
45° STREET ELL (SPIG × SOC) |
|||||||
| 3/4"- 2" (427-xxx) | |||||||
|
45°ELL (SOC × SOC) |
|||||||
| 1/2"- 5" (417-xxx) | |||||||
|
90° ELL (SOC X FIPT) |
|||||||
| 1/2"(407-005) | |||||||
|
90°ELL (SOC × SOC) |
|||||||
| 1/2" -6" (406-xxx) | |||||||
|
90°REDUCING ELL (SOC × FIPT) |
|||||||
| 3/4×1/2"- 1×3/4" (407-xxx) | |||||||
|
90°REDUCING ELL (SOC × SOC) |
|||||||
| 1-1/2×1/2" (406-209) | |||||||
|
90°STREET ELL (MIPT X SOC) |
|||||||
| 3/4"-1" (410-xxx) | |||||||
|
90°STREET ELL (SPIG × SOC) |
|||||||
| 3/4"- 2-1/2" (409-xxx) | |||||||
|
90°SWEEP ELL (SOC × SOC) |
|||||||
| 2"-3" (406-xxxS) | |||||||
|
CAP (FIPT) |
|||||||
| 3/4" （448-007) | |||||||
|
CAP (SOC) |
|||||||
| 1/2"- 4" （447-xxx) | |||||||
|
COUPLING (SOC X SOC) |
|||||||
| 1/2"- 8" （429-xxx) | |||||||
|
FEMALE ADAPTER (SOC × FIPT) |
|||||||
| 1/2"- 2" （435-xxx) | |||||||
|
INSERT ADAPTER (INSERT × SOC） |
|||||||
| 3/4" （474-007) | |||||||
|
MALE ADAPTER (MIPT × SOC) |
|||||||
| 1/2"- 4" （436-xxx) | |||||||
|
PLUG (MIPT) |
|||||||
| 1" （450-010) | |||||||
|
PLUG (SPIG) |
|||||||
| 1/2"- 1-1/2" （447-xxx) | |||||||
|
REDUCING BUSHING FLUSH STYLE (SPIG × FIPT) |
|||||||
| 1/2×1/8"- 2×3/4" （438-xxx) | |||||||
|
REDUCING BUSHING FLUSH STYLE (SPIG × SOC) |
|||||||
| 3/4×1/2"- 6×4" （437-xxx) | |||||||
|
REDUCING MALE ADAPTER (MIPT×SOC) |
|||||||
| 3/4"×1" （436-102) | |||||||
|
REDUCING T.T. BUSHING FLUSH STYLE (MIPT×FIPT) |
|||||||
| 3/4×1/2" （439-101) | |||||||
|
REDUCING TEE (SOC X SOC X FIPT) |
|||||||
| 3/4×3/4×1/2" - 2×2×1/2" (402-xxx) | |||||||
|
REDUCING TEE (SOC × SOC × SOC) |
|||||||
| 2×2×1-1/2" - 2-1/2×2-1/2×2" (401-xxx) | |||||||
|
TEE (SOC X SOC X FIPT) |
|||||||
| 1/2" (402-005) | |||||||
|
TEE (SOC X SOC X SOC) |
|||||||
| 1/2"-6" (401-xxx) | |||||||
|
WYE (SOC X SOC X SOC) |
|||||||
| 2-1/2" （475-025) | |||||||
# This product may be marked with an alternate trade name: Liansu.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Figure numbers may have the following prefix used to identify retail packaging
requirements: R
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
|||||||
Fittings# + ¢ § [1] [G] |
PVC |
Lesso |
ASTM D2467 |
||||
|
45° Elbow (FIPT x FIPT) |
|||||||
| 1/4'' - 4” (819-xxx) | |||||||
|
45° Elbow (SOC x SOC) |
|||||||
| 1/4" - 12" (817-xxx) | |||||||
|
45° Street Elbow (SPIG x SOC) |
|||||||
| 1/2" - 4" (827-xxx) | |||||||
|
90° Elbow (FIPT x FIPT) |
|||||||
| 1/4" - 4” (808-xxx) | |||||||
|
90° Elbow (SOC x FIPT) |
|||||||
| 1/4" - 2” (807-xxx) | |||||||
|
90° Elbow (SOC x SOC) |
|||||||
| 1/4" - 12” (806-xxx) | |||||||
|
90° Street Elbow (SPIG x SOC) |
|||||||
| 1/2" - 4" (809-xxx) | |||||||
|
Cap (FIPT) |
|||||||
| 1/4" - 4" (848-xxx) | |||||||
|
Cap (SOC) |
|||||||
| 1/4" - 12" (847-xxx) | |||||||
|
Coupling (FIPT x FIPT) |
|||||||
| 1/4" - 4" (830-xxx) | |||||||
|
Coupling (SOC x SOC) |
|||||||
| 1/4” - 12'' (829-xxx) | |||||||
|
Cross (SOC x SOC x SOC x SOC) |
|||||||
| 1/4" - 6" (820-xxx) | |||||||
|
Female Adapter (SOC x FIPT) |
|||||||
| 1/4" - 6" (835-xxx) | |||||||
|
Male Adapter (MIPT x SOC) |
|||||||
| 1/4" - 6" (836-xxx) | |||||||
|
Plug (MIPT) |
|||||||
| 1/2" - 6" (850-xxx) | |||||||
|
Plug (SPIG) |
|||||||
| 1/2" - 4" (849-xxx) | |||||||
|
Reducing Bushing Flush Style (SPIG × FIPT) |
|||||||
| 3/8" x 1/4" - 6" x 4" (838-xxx) | |||||||
|
Reducing Bushing Flush Style (SPIG × SOC) |
|||||||
| 3/8" x 1/4" - 12" x 10" (837-xxx) | |||||||
|
Reducing Coupling (FIPT x FIPT) |
|||||||
| 3/8" x 1/4" – 2" x 1-1/2" (830-xxx) | |||||||
|
Reducing Coupling (SOC x SOC) |
|||||||
| 3/4" x 1/2" - 12'" x 8" (829-xxx) | |||||||
| Reducing T.T. Bushing Flush Style (MIPT × FIPT) | |||||||
|
Reducing Tee (SOC x SOC x FIPT) |
|||||||
| 2” x 2” x 1-1/4" – 2-1/2" x 2-1/2" x 2-1/2" (802-xxx) | |||||||
|
Reducing Tee (SOC x SOC x SOC) |
|||||||
| 3/4" x 3/4" x 1/2" - 12" x 12” x 10” (801-xxx) | |||||||
|
Tee (FIPT x FIPT x FIPT) |
|||||||
| 1/4" - 4" (805-xxx) | |||||||
|
Tee (SOC x SOC x FIPT) |
|||||||
| 1/4" - 2" (802-xxx) | |||||||
|
Tee (SOC x SOC x SOC) |
|||||||
| 1/4" - 6" (801-xxx) | |||||||
# This product may be marked with an alternate trade name: Liansu.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[1] Figure numbers may have the following prefix used to identify retail packaging
requirements: R
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
|||||||
Fittings# + ¢ § [1] [G] |
PVC |
Lesso |
CSA B137.3 |
||||
|
1/4 Bend w/ Low Heel Inlet (H x H x H) |
|||||||
| 1 1/2" - 12" (LP303-xxx) | |||||||
|
45° Elbow (FIPT x FIPT) |
|||||||
| 1/4" - 4" (819-xxx) | |||||||
|
45° Elbow (SOC x SOC) |
|||||||
| 1/4" - 12" (817-xxx) | 3/4" (417-007) | 2" (417-020) | |||||
|
45° Ell (SOC x SOC) |
|||||||
| 1/4" - 6"(417-xxx) | |||||||
|
45° Street Elbow (SPIG x SOC) |
|||||||
| 1/2" - 4" (827-xxx) | |||||||
|
90° Elbow (FIPT x FIPT) |
|||||||
| 1/4" - 4" (808-xxx) | |||||||
|
90° Elbow (SOC x FIPT) |
|||||||
| 1/4" - 2" (807-xxx) | |||||||
|
90° Elbow (SOC x SOC) |
|||||||
| 1/2" - 6" (406-xxx) | 1/4" - 12" (806-xxx) | ||||||
|
90° Reducing Ell (SOC x FIPT) |
|||||||
| 1/4" - 6" (407-xxx) | |||||||
|
90° Street Elbow (SPIG x SOC) |
|||||||
| 1/2" - 4" (809-xxx) | |||||||
|
90° Street Ell (SPIG x SOC) |
|||||||
| 1/4" - 6" (409-xxx) | |||||||
|
Cap (FIPT) |
|||||||
| 1/4" - 4" (848-xxx) | |||||||
|
Cap (SOC) |
|||||||
| 1/4" - 12" (847-xxx) | 3/4" (447-007) | 4" (447-040) | |||||
|
Cleanout Plug (MPT) |
|||||||
| 1 1/2" - 12" (LP106-xxx) | |||||||
|
Cleanout Tee w/ C.O. Plug (H x H) |
|||||||
| 1 1/2" - 12" (LP444X-xxx) | |||||||
|
Combo Wye and 1/8 Bend, Reducing (One Pc)(All HUB) |
|||||||
| 1 1/4" - 12" (LP502-xxx) | |||||||
|
Coupling (FIPT x FIPT) |
|||||||
| 1/4" - 4" (830-xxx) | |||||||
|
Coupling (H x H) |
|||||||
| 1 1/2" - 12" (LP100-xxx) | |||||||
|
Coupling (SOC x SOC) |
|||||||
| 1/4" - 12" (829-xxx) | 3/4" - 4" (429-xxx) | ||||||
|
Cross (SOC x SOC x SOC x SOC) |
|||||||
| 1/4" - 6" (820-xxx) | |||||||
|
Female Adapter (FPT x H) |
|||||||
| 1 1/2" - 12" (LP101-xxx) | |||||||
|
Female Adapter (SOC x FIPT) |
|||||||
| 1/4" - 6" (835-xxx) | |||||||
|
Flush Bushing (S x H) |
|||||||
| 1 1/2" - 12" (LP107-xxx) | |||||||
|
Flush C.O. Tee (H x H x FPT) |
|||||||
| 1 1/2" - 12" (LP445-xxx) | |||||||
|
Long Sweep 1/4 Bend, Street (H x S) |
|||||||
| 1 1/2" - 12" (LP309-xxx) | |||||||
|
Male Adapter (MIPT x SOC) |
|||||||
| 1/4" - 6" (836-xxx) | 3/4" (436-007) | ||||||
|
Plug (MIPT) |
|||||||
| 1/2" - 6" (850-xxx) | |||||||
|
Plug (SPIG) |
|||||||
| 1/2" - 4" (849-xxx) | |||||||
|
Reducing Bushing Flush Style (SPIG × FIPT) |
|||||||
| 3/8" x 1/4" – 6" x 4" (838-xxx) | |||||||
|
Reducing Bushing Flush Style (SPIG × SOC) |
|||||||
| 3/8" x 1/4" – 12" x 10" (837-xxx) | |||||||
|
Reducing Coupling (FIPT x FIPT) |
|||||||
| 3/8" x 1/4" – 2" x 1-1/2" (830-xxx) | |||||||
|
Reducing Coupling (SOC x SOC) |
|||||||
| 3/4" x 1/2" - 12" x 8" (829-xxx) | |||||||
|
Reducing Double Wye (ALL HUB) |
|||||||
| (LP612-xxx) | |||||||
|
Reducing T.T. Bushing Flush Style (MIPT × FIPT) |
|||||||
| 3/8" x 1/4" – 4" x 3" (839-xxx) | |||||||
|
Reducing Tee (SOC x SOC x FIPT) |
|||||||
| 2" x 2" x 1-1/4" – 2-1/2" x 2-1/2" x 2-1/2" (802-xxx) | 1/4" - 6" (402-xxx) | ||||||
|
Reducing Tee (SOC x SOC x SOC) |
|||||||
| 3/4" x 3/4" x 1/2" - 12" x 12" x 10" (801-xxx) | |||||||
|
Return Bend (H x H) |
|||||||
| 1 1/2" - 12" (LP700-xxx) | |||||||
|
Tee (FIPT x FIPT x FIPT) |
|||||||
| 1/4" - 4" (805-xxx) | |||||||
|
Tee (SOC x SOC x FIPT) |
|||||||
| 1/4" - 2" (802-xxx) | |||||||
|
Tee (SOC x SOC x SOC) |
|||||||
| 1/4" - 6"(401-xxx) | 1/4" - 6" (801-xxx) | ||||||
|
Trap Elbow (for use with Traps only) (H x S) |
|||||||
| 1 1/4" - 12" (LP335-xxx) | |||||||
|
Vent Ell, Street (H x S) |
|||||||
| 1 1/4" - 12" (LP333-xxx) | |||||||
# This product may be marked with an alternate trade name: Liansu.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[1] Figure numbers may have the following prefix used to identify retail packaging
requirements: R
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
|||||||
Fittings# + ¢ [1] [2] [G] |
PVC |
Lesso |
ASTM F1970 |
||||
|
Compression Coupling (GASKET x GASKET) |
|||||||
| IR90-05 (1/2") | IR90-15 (1 1/2") | IR90-40 (4") | IR90-07 (3/4") | ||||
| IR90-20 (2") | IR90-60 (6") | IR90-10 (1") | IR90-25 (2 1/2") | ||||
| IR90-12 (1 1/4") | IR90-30 (3") | ||||||
|
Compression Tee (GASKET x GASKET x FIPT) |
|||||||
| IR91-05 (1/2") | IR91-07 (3/4") | IR91-10 (1") | |||||
|
Expand Repair Coupling(SOC x SPIG) |
|||||||
| FSF-250 (2 1/2") | FSF-300 (3") | FSF-400 (4") | |||||
# This product may be marked with an alternate trade name: Liansu.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Figure numbers may have the following prefix used to identify retail packaging
requirements: R
[2] PVC Fittings rated as 200psi at 23ºC.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
|||||||
Fittings# + [1] [3] [G] |
PVC |
Lesso |
ASTM F1970 |
||||
|
Union w/o-ring Seal (FIPT × FIPT) |
|||||||
| 1/4" - 6" (898-xxx) | |||||||
|
Union w/o-ring Seal (SOC × FIPT) |
|||||||
| 1/4" - 6" (899-xxx) | |||||||
# This product may be marked with an alternate trade name: Liansu.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Figure numbers may have the following prefix used to identify retail packaging
requirements: R
[3] PVC Fittings rated as 235psi at 23ºC
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
|||||||
Fittings# + ¢ [1] [3] [G] |
PVC |
Lesso |
ASTM F1970 |
||||
|
Expand Repair Coupling (SOC x SPIG) |
|||||||
| FSF-050 (1/2") | FSF-150 (1 1/2") | FSF-075 (3/4") | FSF-200 (2") | ||||
| FSF-100 (1") | FSF-125 (1 1/4") | ||||||
# This product may be marked with an alternate trade name: Liansu.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Figure numbers may have the following prefix used to identify retail packaging
requirements: R
[3] PVC Fittings rated as 235psi at 23ºC
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
|||||||
Fittings# + ¢ § [1] [3] [G] |
PVC |
Lesso |
ASTM F1970 |
||||
|
Union w/ O-ring Seal (SOC x SOC) |
|||||||
| 897-xxx (1/4" - 6") | |||||||
|
Union w/o-ring Seal (FIPT × FIPT) |
|||||||
| 1/4" - 6" (898-xxx) | |||||||
|
Union w/o-ring Seal (SOC × FIPT) |
|||||||
| 1/4" - 6" (899-xxx) | |||||||
|
Union w/o-ring Seal (SOC × MIPT) |
|||||||
| 1/4" - 6" (896-xxx) | |||||||
# This product may be marked with an alternate trade name: Liansu.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[1] Figure numbers may have the following prefix used to identify retail packaging
requirements: R
[3] PVC Fittings rated as 235psi at 23ºC
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
|||||||
Fittings# + ¢ § [4] [G] |
PVC |
Lesso |
ASTM F1970 |
||||
|
Blind Flange |
|||||||
| 1/4" - 12" (853-xxx) | |||||||
|
Expand Repair Coupling (SOC x SPIG) |
|||||||
| FSF-600 (6") | |||||||
|
Flange One Piece (SOC) |
|||||||
| 1/4" - 12" (851-xxx) | |||||||
|
Flange Two Pieces (SOC) |
|||||||
| 1/4" - 12" (854-xxx) | |||||||
|
Flange Van Stone Style W/PVC Ring (SPIG) |
|||||||
| 1/4" - 12" (856-xxx) | |||||||
|
Floor Flange (FIPT) |
|||||||
| 852-xxx (1/4" - 6") | |||||||
|
Union w/ O-ring Seal (FIPT x FIPT) |
|||||||
| 498-005 (1/2") | 498-007 (3/4") | 498-010 (1") | 498-012 (1 1/4") | ||||
| 498-015 (1 1/2") | 498-020 (2") | ||||||
|
Union w/ O-ring Seal (SOC x SOC) |
|||||||
| 497-005 (1/2") | 497-007 (3/4") | 497-010 (1") | 497-012 (1 1/4") | ||||
| 497-015 (1 1/2") | 497-020 (2") | ||||||
# This product may be marked with an alternate trade name: Liansu.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[4] PVC Fittings rated as 150psi at 23ºC
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
|||||||
Fittings# |
PVC |
Lesso |
CSA B137.3 |
||||
|
Compression Coupling (GASKET x GASKET) |
|||||||
| IR90-05 (1/2") | IR90-15 (1 1/2") | IR90-40 (4") | IR90-07 (3/4") | ||||
| IR90-20 (2") | IR90-60 (6") | IR90-10 (1") | IR90-25 (2 1/2") | ||||
| IR90-12 (1 1/4") | IR90-30 (3") | ||||||
|
Compression Tee (GASKET x GASKET x FIPT) |
|||||||
| IR91-05 (1/2") | IR91-07 (3/4") | IR91-10 (1") | |||||
|
Expand Repair Coupling(SOC x SPIG) |
|||||||
| FSF-250 (2 1/2") | FSF-300 (3") | FSF-400 (4") | |||||
# This product may be marked with an alternate trade name: Liansu. |
|||||||
Fittings# + ¢ [1] [G] |
PVC |
Lesso |
CSA B137.3 |
||||
|
Expand Repair Coupling (SOC x SPIG) |
|||||||
| FSF-050 (1/2") | FSF-150 (1 1/2") | FSF-075 (3/4") | FSF-200 (2") | ||||
| FSF-100 (1") | FSF-125 (1 1/4") | ||||||
|
Union w/ O-ring Seal (FIPT x FIPT) |
|||||||
| 498-005 (1/2") | 498-015 (1 1/2") | 498-007 (3/4") | 498-020 (2") | ||||
| 498-010 (1") | 498-012 (1 1/4") | ||||||
|
Union w/ O-ring Seal (SOC x SOC) |
|||||||
| 497-005 (1/2") | 497-015 (1 1/2") | 497-007 (3/4") | 497-020 (2") | ||||
| 497-010 (1") | 497-012 (1 1/4") | ||||||
# This product may be marked with an alternate trade name: Liansu.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Figure numbers may have the following prefix used to identify retail packaging
requirements: R
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
|||||||
Fittings# + ¢ § [1] [G] |
PVC |
Lesso |
CSA B137.3 |
||||
|
Blind Flange |
|||||||
| 1/4" - 12" (853-xxx) | |||||||
|
Flange One Piece (SOC) |
|||||||
| 1/4" - 12" (851-xxx) | |||||||
|
Flange Two Pieces (SOC) |
|||||||
| 1/4" - 12" (854-xxx) | |||||||
|
Flange Van Stone Style W/PVC Ring (SPIG) |
|||||||
| 1/4" - 12" (856-xxx) | |||||||
|
Floor Flange (FIPT) |
|||||||
| 852-xxx (1/4" - 6") | |||||||
# This product may be marked with an alternate trade name: Liansu.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[1] Figure numbers may have the following prefix used to identify retail packaging
requirements: R
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
|||||||
Fittings# + ¢ § [1] [G] |
PVC |
Lesso |
CSA B137.3 |
||||
|
Union w/ O-ring Seal (SOC x SOC) |
|||||||
| 897-xxx (1/4" - 6") | |||||||
|
Union w/o-ring Seal (FIPT × FIPT) |
|||||||
| 1/4" - 6" (898-xxx) | |||||||
|
Union w/o-ring Seal (SOC × FIPT) |
|||||||
| 1/4" - 6" (899-xxx) | |||||||
|
Union w/o-ring Seal (SOC × MIPT) |
|||||||
| 1/4" - 6" (896-xxx) | |||||||
# This product may be marked with an alternate trade name: Liansu.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[1] Figure numbers may have the following prefix used to identify retail packaging
requirements: R
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
|||||||
Number of matching Manufacturers is 1
Number of matching Products is 1419
Processing time was 0 seconds
