NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, January 29, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?Company=C0847805&Standard=014&

Did you know?

The new NSF Product Listings website is available for NSF/ANSI 14-Certified products with a new look and feel. Click on "Try it Now" to check it out!
NSF/ANSI 14
Plastics Piping System Components and Related Materials

Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document


 
Topaipe Plumbing LLC 
3413 Devonshire Ct
Flower Mound, TX 75022 
United States 
945-270-9776

Facility : Guangdong, China

Surface Burning Characteristics of Building Materials

Product Type   Material Type   Trade Name   Product Standard

Tubing[1] [3]		  
PEX		  
TOPAIPE		  
ASTM E84
3/8" - 2"[2] 

[2] Flame Spread Index <= 25	
    Smoke Developed Index <= 50

[1] Certified for red and white PEX 5106 monowall pipe.
[3] The Flame Spread Index and Smoke Developed Index are based on when tubing is field
    insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG
    installation instructions. Flame Spread Index and Smoke Developed Index based on minimum
    spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84
    FS<=25/SD<=50].

Tubing[1] [4]		  
PEX		  
TOPAIPE		  
CAN/ULC S102.2
3/8" - 2"[2] 

[2] Flame Spread Index <= 25	
    Smoke Developed Index <= 50

[1] Certified for red and white PEX 5106 monowall pipe.
[4] The Flame Spread Index and Smoke Developed Index are based on when the tubing is field
    insulated with 1/2" JM Microlok HP Hi Performance Fiberglass insulation as per the
    pipe	manufacturer's installation instructions. Tubing shall be Marked [cNSF®-fs ULc
    S102.2	 FS<=25/SD<=50].

Tubing[5] [6]		  
PEX		  
TOPAIPE		  
ASTM E84
3/8" - 1"[2] 

[2] Flame Spread Index <= 25	
    Smoke Developed Index <= 50

[5] Certified for blue, red and white PEX 5106 & 5306 2-layer skinned and 4-layer barrier
    pipe.
[6] The Flame Spread Index and Smoke Developed Index are based on when tubing is field
    insulated with 1/2" JM Microlok HP Hi performance   fiberglass insulation as per RIFENG
    installation instructions (all listed construction/color/size combinations greater
    than	or equal to 3/8" in diameter). Flame Spread Index and Smoke Developed Index based
    on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs
    ASTM E84 FS<=25/SD<=50].

Tubing[5] [7]		  
PEX		  
TOPAIPE		  
CAN/ULC S102.2
3/8" - 1"[2] 

[2] Flame Spread Index <= 25	
    Smoke Developed Index <= 50

[5] Certified for blue, red and white PEX 5106 & 5306 2-layer skinned and 4-layer barrier
    pipe.
[7] The Flame Spread Index and Smoke Developed Index are based on when the tubing is field
    insulated with 1/2" JM Microlok HP Hi Performance Fiberglass insulation as per the
    pipe	manufacturer's installation instructions (all listed construction/color/size
    combinations greater than or equal to 3/8" in diameter). Tubing shall be Marked
    [cNSF®-fs ULc S102.2 FS<=25/SD<=50].

Tubing[3] [8]		  
PEX		  
TOPAIPE PEXa		  
ASTM E84
1/8" - 3"[2] 

[2] Flame Spread Index <= 25	
    Smoke Developed Index <= 50

[3] The Flame Spread Index and Smoke Developed Index are based on when tubing is field
    insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG
    installation instructions. Flame Spread Index and Smoke Developed Index based on minimum
    spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84
    FS<=25/SD<=50].
[8] Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for
    red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, 
    white, blue, orange, natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.

Tubing[4] [8]		  
PEX		  
TOPAIPE PEXa		  
CAN/ULC S102.2
1/8" - 3"[2] 

[2] Flame Spread Index <= 25	
    Smoke Developed Index <= 50

[4] The Flame Spread Index and Smoke Developed Index are based on when the tubing is field
    insulated with 1/2" JM Microlok HP Hi Performance Fiberglass insulation as per the
    pipe	manufacturer's installation instructions. Tubing shall be Marked [cNSF®-fs ULc
    S102.2	 FS<=25/SD<=50].
[8] Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for
    red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red, 
    white, blue, orange, natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.


Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Tubing! * ^ § +++ [G]		  
PEX 5106		  
TOPAIPE		  
ASTM F876/F877
1/8" - 6" SDR 9 

! Certified for natural, red, white and blue without oxygen barrier.		
  Natural - 5006		
  Red, white, blue - 5006, 5106, 5206
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Tubing! * ^ § +++ [G]		  
PEX 5106		  
TOPAIPE		  
CSA B137.5
1/8" - 6" SDR 9 

! Certified for natural, red, white and blue without oxygen barrier.		
  Natural - 5006		
  Red, white, blue - 5006, 5106, 5206
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Tubing* ^ ¢ +++ [1] [G]		  
PEX 5106		  
TOPAIPE		  
ASTM F876/F877
>= 1/8" 

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] Certified for red and white PEX 5106 monowall pipe.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Tubing& * ^ ~ ¢ +++ [1] [G]		  
PEX 5106		  
TOPAIPE		  
CSA B137.5
>= 1/8" 

& Meets the chlorine resistance requirements of ASTM F1281 when tested in accordance with
  ASTM F2023.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Product is authorized to bear the cNSF Mark.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] Certified for red and white PEX 5106 monowall pipe.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Tubing* ^ ~ ¢ +++ [2] [G]		  
PEX 5106		  
TOPAIPE PEXa		  
ASTM F876/F877
1/8" - 3" 

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Product is authorized to bear the cNSF Mark.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[2] Certified for the following:			
    1. Monowall pipe [PEX 5106]: 1/8" - 3"			
    2. 2-layer skinned pipe for Red, Blue, White [PEX 5106]: 1/2", 5/8", 3/4", 1" sizes only.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Tubing* ^ ¢ +++ [2] [3] [G]		  
PEX 5106		  
TOPAIPE PEXa		  
CSA B137.5
1/8" - 3" 

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[2] Certified for the following:			
    1. Monowall pipe [PEX 5106]: 1/8" - 3"			
    2. 2-layer skinned pipe for Red, Blue, White [PEX 5106]: 1/2", 5/8", 3/4", 1" sizes only.
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked with the following fitting system designations:  ASTM F1807, ASTM F2159, ASTM
    F1960, ASTM F2098.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Fittings[4]		  
PEX		  
TOPAIPE		  
ASTM F1960

RIFENG PEX Ring with Stop
3/8" - 2"   

[4] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5.  This is a non wetted product.

Fittings[4]		  
PEX		  
TOPAIPE		  
CSA B137.5

RIFENG PEX Ring with Stop
3/8" - 2"   

[4] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5.  This is a non wetted product.

Number of matching Manufacturers is 1
Number of matching Products is 14
Processing time was 0 seconds