NSF Product and Service Listings
These NSF Official Listings are current as of Sunday, August 30, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?Company=C0864211&Standard=014&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| Anchor Distribution Limited | |
| #15 - 350 Creditstone Ave | |
| Vaughan, ON L4K 3Z2 | |
| Canada | |
| 416-436-6593 |
Facility : # 1 China
Surface Burning Characteristics of Building Materials
| Product Type | Material Type | Trade Name | Product Standard | |||
Tubing[1] [2] |
PEX |
PEXPLUS |
ASTM E84 |
|||
| 1/8" - 3"[3] | ||||||
[3] Flame Spread Index <= 25
Smoke Developed Index <= 50
[1] The Flame Spread Index and Smoke Developed Index are based on when tubing is field
insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG
installation instructions. Flame Spread Index and Smoke Developed Index based on minimum
spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84
FS<=25/SD<=50].
[2] Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes.
Certified for red, white, blue 2-layer tubing for 1/2", 5/8" 3/4", 1" sizes only.
|
||||||
Tubing[2] [4] |
PEX |
PEXPLUS |
CAN/ULC S102.2 |
|||
| 1/8" - 3"[3] | ||||||
[3] Flame Spread Index <= 25
Smoke Developed Index <= 50
[2] Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes.
Certified for red, white, blue 2-layer tubing for 1/2", 5/8" 3/4", 1" sizes only.
[4] The Flame Spread Index and Smoke Developed Index are based on when the tubing is field
insulated with 1/2" JM Microlok HP Hi Performance Fiberglass insulation as per the pipe
manufacturer's installation instructions. Tubing shall be Marked [cNSF®-fs ULc S102.2
FS<=25/SD<=50].
|
||||||
Tubing[1] [5] |
PEX |
PEXPLUS |
ASTM E84 |
|||
| 1/8" - 3"[3] | ||||||
[3] Flame Spread Index <= 25
Smoke Developed Index <= 50
[1] The Flame Spread Index and Smoke Developed Index are based on when tubing is field
insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG
installation instructions. Flame Spread Index and Smoke Developed Index based on minimum
spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84
FS<=25/SD<=50].
[5] Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes.
Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.
Certified for red, white, blue, orange, natural 3-layer tubing for 1/2", 5/8", 3/4", 1"
sizes only.
|
||||||
Tubing[4] [5] |
PEX |
PEXPLUS |
CAN/ULC S102.2 |
|||
| 1/8" - 3"[3] | ||||||
[3] Flame Spread Index <= 25
Smoke Developed Index <= 50
[4] The Flame Spread Index and Smoke Developed Index are based on when the tubing is field
insulated with 1/2" JM Microlok HP Hi Performance Fiberglass insulation as per the pipe
manufacturer's installation instructions. Tubing shall be Marked [cNSF®-fs ULc S102.2
FS<=25/SD<=50].
[5] Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes.
Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.
Certified for red, white, blue, orange, natural 3-layer tubing for 1/2", 5/8", 3/4", 1"
sizes only.
|
||||||
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | ||||
Fittings+++ [G] |
PPSU |
PEXPLUS |
ASTM F2159 |
||||
|
End Cap |
|||||||
| 3/8" | 1/2" | 3/4" | 1" | ||||
|
Equal Elbow |
|||||||
| 3/8" | 1/2" | 3/4" | 1" | ||||
|
Equal Straight |
|||||||
| 3/8" | 1/2" | 3/4" | 1" | ||||
|
Equal Tee |
|||||||
| 3/8" | 1/2" | 3/4" | 1" | ||||
|
Female Equal Elbow |
|||||||
| 3/8" x 3/8"F | 1/2" x 1/2"F | 3/4" x 3/4"F | 1" x 1"F | ||||
|
Female Equal Straight |
|||||||
| 3/8" x 3/8"F | 1/2" x 1/2"F | 3/4" x 3/4"F | 1" x 1"F | ||||
|
Female Equal Tee |
|||||||
| 3/8" x 3/8"F | 1/2" x 1/2"F | 3/4" x 3/4"F | 1" x 1"F | ||||
|
Female Unequal Elbow |
|||||||
| 3/8" x 1/2"F | 1/2" x 3/4"F | 3/4" x 1"F | 1/2" x 1"F | ||||
| 1/2" x 3/8"F | 3/4" x 1/2"F | 1" x 3/4"F | 1" x 1/2"F | ||||
|
Female Unequal Straight |
|||||||
| 3/8" x 1/2"F | 1/2" x 3/4"F | 3/4" x 1"F | 1/2" x 1"F | ||||
|
Female Unequal Tee |
|||||||
| 3/8" x 1/2"F x 3/8" | 1/2" x 3/4"F x 1/2" | 3/4" x 1"F x 3/4" | 1/2" x 1"F x 1/2" | ||||
| 1/2" x 3/8"F x 3/8" | 3/4" x 1/2"F x 1/2" | 1" x 3/4"F x 3/4" | 1" x 1/2"F x 1/2" | ||||
| 1/2" x 1/2"F x 3/8" | 3/4" x 3/4"F x 1/2" | 1" x 1"F x 3/4" | 1" x 1"F x 1/2" | ||||
| 1/2" x 3/8"F x 1/2" | 3/4" x 1/2"F x 3/4" | 1" x 3/4"F x 1" | 1" x 1/2"F x 1" | ||||
|
Male Equal Elbow |
|||||||
| 3/8" x 3/8"M | 1/2" x 1/2"M | 3/4" x 3/4"M | 1" x 1"M | ||||
|
Male Equal Straight |
|||||||
| 3/8" x 3/8"M | 1/2" x 1/2"M | 3/4" x 3/4"M | 1" x 1"M | ||||
|
Male Equal Tee |
|||||||
| 3/8" x 3/8"M x 3/8" | 1/2" x 1/2"M x 1/2" | 3/4" x 3/4"M x 3/4" | 1" x 1"M x 1" | ||||
|
Male Unequal Elbow |
|||||||
| 3/8" x 1/2"M | 1/2" x 3/4"M | 3/4" x 1"M | 1/2" x 1"M | ||||
| 1/2" x 3/8"M | 3/4" x 1/2"M | 1" x 3/4"M | 1" x 1/2"M | ||||
|
Male Unequal Straight |
|||||||
| 3/8" x 1/2"M | 1/2" x 3/4"M | 3/4" x 1"M | 1/2" x 1"M | ||||
| 1/2" x 3/8"M | 3/4" x 1/2"M | 1" x 3/4"M | 1" x 1/2"M | ||||
|
Male Unequal Tee |
|||||||
| 3/8" x 1/2"M x 3/8" | 1/2" x 3/4"M x 1/2" | 3/4" x 1"M x 3/4" | 1/2" x 1"M x 1/2" | ||||
| 1/2" x 3/8"M x 3/8" | 3/4" x 1/2"M x 1/2" | 1" x 3/4"M x 3/4" | 1" x 1/2"M x 1/2" | ||||
| 1/2" x 1/2"M x 3/8" | 3/4" x 3/4"M x 1/2" | 1" x 1"M x 3/4" | 1" x 1"M x 1/2" | ||||
| 1/2" x 3/8"M x 1/2" | 3/4" x 1/2"M x 3/4" | 1" x 3/4"M x 1" | 1" x 1/2"M x 1" | ||||
|
Unequal Elbow |
|||||||
| 3/8" x 1/2" | 1/2" x 3/4" | 3/4" x 1" | 1/2" x 1" | ||||
|
Unequal Straight |
|||||||
| 3/8" x 1/2" | 1/2" x 3/4" | 3/4" x 1" | 1/2" x 1" | ||||
|
Unequal Tee |
|||||||
| 3/8" x 1/2" x 3/8" | 1/2" x 3/4" x 1/2" | 3/4" x 1" x 3/4" | 1/2" x 1" x 1/2" | ||||
| 1/2" x 3/8" x 3/8" | 3/4" x 1/2" x 1/2" | 1" x 3/4" x 3/4" | 1" x 1/2" x 1/2" | ||||
| 1/2" x 1/2" x 3/8" | 3/4" x 3/4" x 1/2" | 1" x 1" x 3/4" | 1" x 1" x 1/2" | ||||
| 1/2" x 3/8" x 1/2" | 3/4" x 1/2" x 3/4" | 1" x 3/4" x 1" | 1" x 1/2" x 1" | ||||
| 3/4" x 1/2" x 3/8" | 3/4" x 3/8" x 1/2" | 1" x 3/4" x 1/2" | 1" x 1/2" x 3/4" | ||||
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
|||||||
Fittings¢ +++ [G] |
PPSU |
PEXPLUS |
CSA B137.5 |
||||
|
End Cap |
|||||||
| 3/8" | 1/2" | 3/4" | 1" | ||||
|
Equal Elbow |
|||||||
| 3/8" | 1/2" | 3/4" | 1" | ||||
|
Equal Straight |
|||||||
| 3/8" | 1/2" | 3/4" | 1" | ||||
|
Equal Tee |
|||||||
| 3/8" | 1/2" | 3/4" | 1" | ||||
|
Female Equal Elbow |
|||||||
| 3/8" x 3/8"F | 1/2" x 1/2"F | 3/4" x 3/4"F | 1" x 1"F | ||||
|
Female Equal Straight |
|||||||
| 3/8" x 3/8"F | 1/2" x 1/2"F | 3/4" x 3/4"F | 1" x 1"F | ||||
|
Female Equal Tee |
|||||||
| 3/8" x 3/8"F | 1/2" x 1/2"F | 3/4" x 3/4"F | 1" x 1"F | ||||
|
Female Unequal Elbow |
|||||||
| 3/8" x 1/2"F | 1/2" x 3/4"F | 3/4" x 1"F | 1/2" x 1"F | ||||
| 1/2" x 3/8"F | 3/4" x 1/2"F | 1" x 3/4"F | 1" x 1/2"F | ||||
|
Female Unequal Straight |
|||||||
| 3/8" x 1/2"F | 1/2" x 3/4"F | 3/4" x 1"F | 1/2" x 1"F | ||||
|
Female Unequal Tee |
|||||||
| 3/8" x 1/2"F x 3/8" | 1/2" x 3/4"F x 1/2" | 3/4" x 1"F x 3/4" | 1/2" x 1"F x 1/2" | ||||
| 1/2" x 3/8"F x 3/8" | 3/4" x 1/2"F x 1/2" | 1" x 3/4"F x 3/4" | 1" x 1/2"F x 1/2" | ||||
| 1/2" x 1/2"F x 3/8" | 3/4" x 3/4"F x 1/2" | 1" x 1"F x 3/4" | 1" x 1"F x 1/2" | ||||
| 1/2" x 3/8"F x 1/2" | 3/4" x 1/2"F x 3/4" | 1" x 3/4"F x 1" | 1" x 1/2"F x 1" | ||||
|
Male Equal Elbow |
|||||||
| 3/8" x 3/8"M | 1/2" x 1/2"M | 3/4" x 3/4"M | 1" x 1"M | ||||
|
Male Equal Straight |
|||||||
| 3/8" x 3/8"M | 1/2" x 1/2"M | 3/4" x 3/4"M | 1" x 1"M | ||||
|
Male Equal Tee |
|||||||
| 3/8" x 3/8"M x 3/8" | 1/2" x 1/2"M x 1/2" | 3/4" x 3/4"M x 3/4" | 1" x 1"M x 1" | ||||
|
Male Unequal Elbow |
|||||||
| 3/8" x 1/2"M | 1/2" x 3/4"M | 3/4" x 1"M | 1/2" x 1"M | ||||
| 1/2" x 3/8"M | 3/4" x 1/2"M | 1" x 3/4"M | 1" x 1/2"M | ||||
|
Male Unequal Straight |
|||||||
| 3/8" x 1/2"M | 1/2" x 3/4"M | 3/4" x 1"M | 1/2" x 1"M | ||||
| 1/2" x 3/8"M | 3/4" x 1/2"M | 1" x 3/4"M | 1" x 1/2"M | ||||
|
Male Unequal Tee |
|||||||
| 3/8" x 1/2"M x 3/8" | 1/2" x 3/4"M x 1/2" | 3/4" x 1"M x 3/4" | 1/2" x 1"M x 1/2" | ||||
| 1/2" x 3/8"M x 3/8" | 3/4" x 1/2"M x 1/2" | 1" x 3/4"M x 3/4" | 1" x 1/2"M x 1/2" | ||||
| 1/2" x 1/2"M x 3/8" | 3/4" x 3/4"M x 1/2" | 1" x 1"M x 3/4" | 1" x 1"M x 1/2" | ||||
| 1/2" x 3/8"M x 1/2" | 3/4" x 1/2"M x 3/4" | 1" x 3/4"M x 1" | 1" x 1/2"M x 1" | ||||
|
Unequal Elbow |
|||||||
| 3/8" x 1/2" | 1/2" x 3/4" | 3/4" x 1" | 1/2" x 1" | ||||
|
Unequal Straight |
|||||||
| 3/8" x 1/2" | 1/2" x 3/4" | 3/4" x 1" | 1/2" x 1" | ||||
|
Unequal Tee |
|||||||
| 3/8" x 1/2" x 3/8" | 1/2" x 3/4" x 1/2" | 3/4" x 1" x 3/4" | 1/2" x 1" x 1/2" | ||||
| 1/2" x 3/8" x 3/8" | 3/4" x 1/2" x 1/2" | 1" x 3/4" x 3/4" | 1" x 1/2" x 1/2" | ||||
| 1/2" x 1/2" x 3/8" | 3/4" x 3/4" x 1/2" | 1" x 1" x 3/4" | 1" x 1" x 1/2" | ||||
| 1/2" x 3/8" x 1/2" | 3/4" x 1/2" x 3/4" | 1" x 3/4" x 1" | 1" x 1/2" x 1" | ||||
| 3/4" x 1/2" x 3/8" | 3/4" x 3/8" x 1/2" | 1" x 3/4" x 1/2" | 1" x 1/2" x 3/4" | ||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
|||||||
Tubing* ^ ~ ¢ +++ [1] [G] |
PEX 5106 |
PEXPLUS |
ASTM F876/F877 |
||||
| 1/8" - 3" | |||||||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for
red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[1] Certified for the following:
1. Monowall pipe [PEX 5106]: 1/8" - 3"
2. 2-layer skinned pipe for Red, Blue, White [PEX 5106]: 1/2", 5/8", 3/8", 3/4", 1", 1
1/4", 1 1/2", 2" sizes only.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
|||||||
Tubing* ^ ~ ¢ +++ [1] [2] [G] |
PEX 5106 |
PEXPLUS |
CSA B137.5 |
||||
| 1/8" - 3" | |||||||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for
red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[1] Certified for the following:
1. Monowall pipe [PEX 5106]: 1/8" - 3"
2. 2-layer skinned pipe for Red, Blue, White [PEX 5106]: 1/2", 5/8", 3/8", 3/4", 1", 1
1/4", 1 1/2", 2" sizes only.
[2] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM
F1960, ASTM F2098.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
|||||||
Radiant Floor Heating
| Product Type | Material Type | Trade Name | Product Standard | |||
Tubing* ^ ¢ [1] |
PEX 5106 |
PEXPLUS |
ASTM F876/F877 |
|||
| 1/8 " - 3" | ||||||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for the following:
1. Monowall pipe [PEX 5006/PEX 5106]: 1/8"- 3"
2. 2-layer skinned pipe for Red, Blue, White [PEX 5006/PEX 5106]: 1/2", 5/8", 3/8",
3/4", 1", 1 1/4", 1 1/2", 2" sizes only
3. 3-Layer barrier pipe [PEX 5006/PEX 5106]: 1/2", 5/8", 3/8", 3/4", 1", 1 1/4", 1
1/2", 2" sizes only
|
||||||
Tubing* ^ ¢ [1] [2] |
PEX 5106 |
PEXPLUS |
CSA B137.5 |
|||
| 1/8 " - 3" | ||||||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for the following:
1. Monowall pipe [PEX 5006/PEX 5106]: 1/8"- 3"
2. 2-layer skinned pipe for Red, Blue, White [PEX 5006/PEX 5106]: 1/2", 5/8", 3/8",
3/4", 1", 1 1/4", 1 1/2", 2" sizes only
3. 3-Layer barrier pipe [PEX 5006/PEX 5106]: 1/2", 5/8", 3/8", 3/4", 1", 1 1/4", 1
1/2", 2" sizes only
[2] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer and shall be
marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM
F1960, ASTM F2098.
|
||||||
Tubing* ^ ¢ [3] |
PEX 5106 |
PEXPLUS |
ASTM F876/877 |
|||
| 1/2", 5/8", 3/8", 3/4", 1", 1 1/4", 1 1/2", 2" | ||||||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] PEX 5106 Certified for Red, Blue, White 3- Layer Barrier tubing for 1/2", 5/8", 3/8",
3/4", 1", 1 1/4", 1 1/2", 2" sizes only.
|
||||||
Tubing* ^ ¢ [3] |
PEX 5106 |
PEXPLUS |
CSA B137.5 |
|||
| 1/2", 5/8", 3/8", 3/4", 1", 1 1/4", 1 1/2", 2" | ||||||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] PEX 5106 Certified for Red, Blue, White 3- Layer Barrier tubing for 1/2", 5/8", 3/8",
3/4", 1", 1 1/4", 1 1/2", 2" sizes only.
|
||||||
Number of matching Manufacturers is 1
Number of matching Products is 266
Processing time was 1 seconds
