NSF Product and Service Listings
These NSF Official Listings are current as of Thursday, January 15, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?Company=C0871348&Standard=014&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| ONE WORLD SUPPLY INC | |
| 9451 Langelier | |
| Montreal, QC H1P 0A1 | |
| Canada | |
| 514-378-0049 | |
| Visit this company's website |
Facility : # 1 China
Surface Burning Characteristics of Building Materials
| Product Type | Material Type | Trade Name | Product Standard | |||
Tubing# $ * [1] [2] |
PEX |
XPAND |
ASTM E84 |
|||
| 3/8", 1/2" - 2" | ||||||
# The Flame Spread Index and Smoke Developed Index for 1/2"-2" tubing are based on when
tubing is field insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation
as per RIFENG installation instructions. The 3/8" tubing is not insulated.
$ Certified for blue, natural, red, and white without oxygen barrier.
* Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches
between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50].
[1] Flame Spread Index <= 25
Smoke Developed Index <= 50
[2] ASTM E84, 1/2" - 2" The Flame Spread Index and Smoke Developed Index for 1/2" - 2"
tubing are based on when tubing is field insulated with 1/2" JM Microlok HP Hi
performance fiberglass insulation as per RIFENG installation instructions. The 3/8"
tubing is not insulated.
|
||||||
Tubing$ & [1] [3] |
PEX |
XPAND |
CAN/ULC S102.2 |
|||
| 3/8", 1/2" - 2" | ||||||
$ Certified for blue, natural, red, and white without oxygen barrier.
& 3/8" tubing (without insulation) shall be marked [cNSF®-fs ULc S102.2 FS <=25/SD <=50].
1/2" - 2" tubing (with insulation), Flame Spread Index and Smoke Developed Index based
on when the tubing is field insulated with JM Microlok HP Hi Performance Fiberglass
insulation as per the pipe manufacturer's installation instructions. Tubing shall be
Marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50].
[1] Flame Spread Index <= 25
Smoke Developed Index <= 50
[3] 3/8" Tubing (without insulation) Tubing shall be marked [cNSF®-fs ULc S102.2
FS<=25/SD<=50].
1/2" through 2" Tubing (with insulation) Flame Spread Rating and Smoke Developed
Classification based on when the tubing is field insulated with JM Microlok HP Hi
Performance Fiberglass insulation as per the pipe manufacturer's installation
instructions. Tubing shall be marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50].
|
||||||
Tubing[4] [5] |
PEX |
XPAND |
ASTM E84 |
|||
| 3/8" - 2"[1] | ||||||
[1] Flame Spread Index <= 25
Smoke Developed Index <= 50
[4] Certified for red and white PEX 5106 monowall pipe.
[5] The Flame Spread Index and Smoke Developed Index are based on when tubing is field
insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG
installation instructions. Flame Spread Index and Smoke Developed Index based on minimum
spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84
FS<=25/SD<=50].
|
||||||
Tubing[4] [6] |
PEX |
XPAND |
CAN/ULC S102.2 |
|||
| 3/8" - 2"[1] | ||||||
[1] Flame Spread Index <= 25
Smoke Developed Index <= 50
[4] Certified for red and white PEX 5106 monowall pipe.
[6] The Flame Spread Index and Smoke Developed Index are based on when the tubing is field
insulated with 1/2" JM Microlok HP Hi Performance Fiberglass insulation as per the pipe
manufacturer's installation instructions. Tubing shall be Marked [cNSF®-fs ULc S102.2
FS<=25/SD<=50].
|
||||||
Tubing[7] [8] |
PEX |
XPAND |
ASTM E84 |
|||
| 3/8" - 1"[1] | ||||||
[1] Flame Spread Index <= 25
Smoke Developed Index <= 50
[7] Certified for blue, red and white PEX 5106 & 5306 2-layer skinned and 4-layer barrier
pipe.
[8] The Flame Spread Index and Smoke Developed Index are based on when tubing is field
insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG
installation instructions (all listed construction/color/size combinations greater than
or equal to 3/8" in diameter). Flame Spread Index and Smoke Developed Index based on
minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM
E84 FS<=25/SD<=50].
|
||||||
Tubing[7] [8] |
PEX |
XPAND |
CAN/ULC S102.2 |
|||
| 3/8" - 1"[1] | ||||||
[1] Flame Spread Index <= 25
Smoke Developed Index <= 50
[7] Certified for blue, red and white PEX 5106 & 5306 2-layer skinned and 4-layer barrier
pipe.
[8] The Flame Spread Index and Smoke Developed Index are based on when tubing is field
insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG
installation instructions (all listed construction/color/size combinations greater than
or equal to 3/8" in diameter). Flame Spread Index and Smoke Developed Index based on
minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM
E84 FS<=25/SD<=50].
|
||||||
Tubing[5] [9] |
PEX |
XPAND PEXa |
ASTM E84 |
|||
| 1/8" - 3"[1] | ||||||
[1] Flame Spread Index <= 25
Smoke Developed Index <= 50
[5] The Flame Spread Index and Smoke Developed Index are based on when tubing is field
insulated with 1/2" JM Microlok HP Hi performance fiberglass insulation as per RIFENG
installation instructions. Flame Spread Index and Smoke Developed Index based on minimum
spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84
FS<=25/SD<=50].
[9] Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes.
Certified for red, white, blue 2-layer tubing for 1/2", 5/8" 3/4", 1" sizes only.
|
||||||
Tubing[4] [9] |
PEX |
XPAND PEXa |
CAN/ULC S102.2 |
|||
| 1/8" - 3"[1] | ||||||
[1] Flame Spread Index <= 25
Smoke Developed Index <= 50
[4] Certified for red and white PEX 5106 monowall pipe.
[9] Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes.
Certified for red, white, blue 2-layer tubing for 1/2", 5/8" 3/4", 1" sizes only.
|
||||||
Tubing[3] [10] |
PEX |
XPAND PEXa |
ASTM E84 |
|||
| 1/8" - 3"[1] | ||||||
[1] Flame Spread Index <= 25
Smoke Developed Index <= 50
[3] 3/8" Tubing (without insulation) Tubing shall be marked [cNSF®-fs ULc S102.2
FS<=25/SD<=50].
1/2" through 2" Tubing (with insulation) Flame Spread Rating and Smoke Developed
Classification based on when the tubing is field insulated with JM Microlok HP Hi
Performance Fiberglass insulation as per the pipe manufacturer's installation
instructions. Tubing shall be marked [cNSF®-fs ULc S102.2 FS<=25/SD<=50].
[10] Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes.
Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.
Certified for red, white, blue, orange, natural 3-layer tubing for 1/2", 5/8", 3/4", 1"
sizes only.
|
||||||
Tubing[6] [10] |
PEX |
XPAND PEXa |
CAN/ULC S102.2 |
|||
| 1/8" - 3"[1] | ||||||
[1] Flame Spread Index <= 25
Smoke Developed Index <= 50
[6] The Flame Spread Index and Smoke Developed Index are based on when the tubing is field
insulated with 1/2" JM Microlok HP Hi Performance Fiberglass insulation as per the pipe
manufacturer's installation instructions. Tubing shall be Marked [cNSF®-fs ULc S102.2
FS<=25/SD<=50].
[10] Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes.
Certified for red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.
Certified for red, white, blue, orange, natural 3-layer tubing for 1/2", 5/8", 3/4", 1"
sizes only.
|
||||||
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | ||||
Crimp Fittings (PF5-G)* § +++ |
MLTPL |
XPAND |
ASTM F877 |
||||
| 3/8" - 2 1/2" | |||||||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
|||||||
Crimp Fittings (PF5-G)* § +++ |
MLTPL |
XPAND |
ASTM F1807 |
||||
| 3/8" - 2 1/2" | |||||||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
|||||||
Crimp Fittings (PF5-G)§ +++ [G] |
MLTPL |
XPAND |
ASTM F1807 |
||||
|
- |
|||||||
| 3/8" - 2" | |||||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
|||||||
Crimp Fittings (PF5-G)* ¢ § +++ |
MLTPL |
XPAND |
CSA B137.5 |
||||
| 3/8" - 2 1/2" | |||||||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
|||||||
Crimp Fittings (PF5-G)* ¢ § +++ [G] |
MLTPL |
XPAND |
CSA B137.5 |
||||
| 3/8" - 2 1/2" | |||||||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
|||||||
Fittings[1] |
PEX |
XPAND |
ASTM F1960 |
||||
|
RIFENG PEX Ring with Stop |
|||||||
| 3/8" - 2" | |||||||
[1] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5. This is a non-wetted product. |
|||||||
Fittings[1] |
PEX |
XPAND |
CSA B137.5 |
||||
|
RIFENG PEX Ring with Stop |
|||||||
| 3/8" - 2" | |||||||
[1] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5. This is a non-wetted product. |
|||||||
Fittings+++ [G] |
PPSU |
XPAND |
ASTM F1960 |
||||
|
End Cap |
|||||||
| 3/8" (PF6u-D 3/8) | 1/2" (PF6u-D 1/2) | 3/4" (PF6u-D 3/4) | 1" (PF6u-D 1) | ||||
| 1 1/4" (PF6u-D 1 1/4) | 1 1/2" (PF6u-D 1 1/2) | 2" (PF6u-D 2) | 2 1/2" (PF6u-D 2 1/2) | ||||
| 3" (PF6u-D 3) | |||||||
|
Equal Elbow |
|||||||
| 3/8" (PF6u-L 3/8x3/8) | 1/2" (PF6u-L 1/2x1/2) | 3/4" (PF6u-L 3/4x3/4) | 1" (PF6u-L 1x1) | ||||
| 1 1/4" (PF6u-L 1 1/4x1 1/4) | 1 1/2" (PF6u-L 1 1/2x1 1/2) | 2" (PF6u-L 2x2) | 2 1/2" (PF6u-L 2 1/2x2 1/2) | ||||
| 3" (PF6u-L 3x3) | |||||||
|
Equal Straight |
|||||||
| 3/8" (PF6u-S 3/8x3/8) | 1/2" (PF6u-S 1/2x1/2) | 3/4" (PF6u-S 3/4x3/4) | 1" (PF6u-S 1x1) | ||||
| 1 1/4" (PF6u-S 1 1/4x1 1/4) | 1 1/2" (PF6u-S 1 1/2x1 1/2) | 2" (PF6u-S 2x2) | 2 1/2" (PF6u-S 2 1/2x2 1/2) | ||||
| 3" (PF6u-S 3x3) | |||||||
|
Equal Tee |
|||||||
| 3/8" (PF6u-T 3/8x3/8x3/8) | 1/2" (PF6u-T 1/2x1/2x1/2) | 3/4" (PF6u-T 3/4x3/4x3/4) | 1" (PF6u-T 1x1x1) | ||||
| 1 1/4" (PF6u-T 1 1/4x1 1/4x1 1/4) | 1 1/2" (PF6u-T 1 1/2x1 1/2x1 1/2) | 2" (PF6u-T 2x2x2) | 2 1/2" (PF6u-T 2 1/2x2 1/2x2 1/2) | ||||
| 3" (PF6u-T 3x3x3) | |||||||
|
Female Equal Elbow |
|||||||
| 3/8" x 3/8"F (PF6u-L 3/8x3/8F) | 1/2" x 1/2"F (PF6u-L 1/2x1/2F) | 3/4" x 3/4"F (PF6u-L 3/4x3/4F) | 1" x 1"F (PF6u-L 1x1F) | ||||
|
Female Equal Straight |
|||||||
| 3/8" x 3/8"F (PF6u-S 3/8x3/8F) | 1/2" x 1/2"F (PF6u-S 1/2x1/2F) | 3/4" x 3/4"F (PF6u-S 3/4x3/4F) | 1" x 1"F (PF6u-S 1x1F) | ||||
| 1 1/4" x 1 1/4"F (PF6u-S 1 1/4x1 1/4F) | 1 1/2" x 1 1/2"F (PF6u-S 1 1/2x1 1/2F) | 2"x 2"F (PF6u-S 2x2F) | 2 1/2" x 2 1/2"F (PF6u-S 2 1/2x2 1/2F) | ||||
| 3"x 3"F (PF6u-S 3x3F) | |||||||
|
Female Equal Tee |
|||||||
| 3/8" x 3/8"F x 3/8" (PF6u-T 3/8x3/8Fx3/8) | 1/2" x 1/2"F x 1/2" (PF6u-T 1/2x1/2Fx1/2) | 3/4" x 3/4"F x 3/4" (PF6u-T 3/4x3/4Fx3/4) | 1" x 1"F x 1" (PF6u-T 1x1Fx1) | ||||
|
Female Unequal Elbow |
|||||||
| 3/8" x 1/2"F (PF6u-L 3/8x1/2F) | 1/2" x 3/8"F (PF6u-L 1/2x3/8F) | 1/2" x 3/4"F (PF6u-L 1/2x3/4F) | 1/2" x 1"F (PF6u-L 1/2x1F) | ||||
| 3/4" x 1/2"F (PF6u-L 3/4x1/2F) | 3/4" x 1"F (PF6u-L 3/4x1F) | 1" x 1/2"F (PF6u-L 1x1/2F) | 1" x 3/4"F (PF6u-L 1x3/4F) | ||||
|
Female Unequal Straight |
|||||||
| 3/8" x 1/2"F (PF6u-S 3/8x1/2F) | 1/2" x 3/4"F (PF6u-S 1/2x3/4F) | 1/2" x 1"F (PF6u-S 1/2x1F) | 3/4" x 1"F (PF6u-S 3/4x1F) | ||||
| 1 1/4" x 3/4"F (PF6u-S 1 1/4x3/4F) | 1 1/4" x 1"F (PF6u-S 1 1/4x1F) | 1 1/2" x 1 1/4"F (PF6u-S 1 1/2x1 1/4F) | 2" x 1 1/4"F (PF6u-S 2x1 1/4F) | ||||
| 2" x 1 1/2"F (PF6u-S 2x1 1/2F) | 2 1/2" x 1 1/4"F (PF6u-S 2 1/2x1 1/4F) | 2 1/2" x 1 1/2"F (PF6u-S 2 1/2x1 1/2F) | 3" x 2"F (PF6u-S 3x2F) | ||||
| 3" x 2 1/2"F (PF6u-S 3x2 1/2F) | |||||||
|
Female Unequal Tee |
|||||||
| 3/8" x 1/2"F x 3/8" (PF6u-T 3/8x1/2Fx3/8) | 1/2" x 3/8"F x 3/8" (PF6u-T 1/2x3/8Fx3/8) | 1/2" x 3/8"F x 1/2" (PF6u-T 1/2x3/8Fx1/2) | 1/2" x 1/2"F x 3/8" (PF6u-T 1/2x1/2Fx3/8) | ||||
| 1/2" x 3/4"F x 1/2" (PF6u-T 1/2x3/4Fx1/2) | 1/2" x 1"F x 1/2" (PF6u-T 1/2x1Fx1/2) | 3/4" x 1/2"F x 1/2" (PF6u-T 3/4x1/2Fx1/2) | 3/4" x 1/2"F x 3/4" (PF6u-T 3/4x1/2Fx3/4) | ||||
| 3/4" x 3/4"F x 1/2" (PF6u-T 3/4x3/4Fx1/2) | 3/4" x 1"F x 3/4" (PF6u-T 3/4x1Fx3/4) | 1" x 1/2"F x 1/2" (PF6u-T 1x1/2Fx1/2) | 1" x 1/2"F x 1" (PF6u-T 1x1/2Fx1) | ||||
| 1" x 3/4"F x 3/4" (PF6u-T 1x3/4Fx3/4) | 1" x 3/4"F x 1" (PF6u-T 1x3/4Fx1) | 1" x 1"F x 1/2" (PF6u-T 1x1Fx1/2) | 1" x 1"F x 3/4" (PF6u-T 1x1Fx3/4) | ||||
|
Male Equal Elbow |
|||||||
| 3/8" x 3/8"M (PF6u-L 3/8x3/8M) | 1/2" x 1/2"M (PF6u-L 1/2x1/2M) | 3/4" x 3/4"M (PF6u-L 3/4x3/4M) | 1" x 1"M (PF6u-L 1x1M) | ||||
| 1 1/4" x 1 1/4"M (PF6u-L 1 1/4x1 1/4M) | 1 1/2" x 1 1/2"M (PF6u-L 1 1/2x1 1/2M) | 2" x 2"M (PF6u-L 2x2M) | 2 1/2" x 2 1/2"M (PF6u-L 2 1/2x2 1/2M) | ||||
| 3" x 3"M (PF6u-L 3x3M) | |||||||
|
Male Equal Straight |
|||||||
| 3/8" x 3/8"M (PF6u-S 3/8x3/8M) | 1/2" x 1/2"M (PF6u-S 1/2x1/2M) | 3/4" x 3/4"M (PF6u-S 3/4x3/4M) | 1" x 1"M (PF6u-S 1x1M) | ||||
| 1 1/4" x 1 1/4"M (PF6u-S 1 1/4x1 1/4M) | 1 1/2" x 1 1/2"M (PF6u-S 1 1/2x1 1/2M) | 2" x 2"M (PF6u-S 2x2M) | 2 1/2" x 2 1/2"M (PF6u-S 2 1/2x2 1/2M) | ||||
| 3" x 3"M (PF6u-S 3x3M) | |||||||
|
Male Equal Tee |
|||||||
| 3/8" x 3/8"M x 3/8" (PF6u-T 3/8x3/8Mx3/8) | 1/2" x 1/2"M x 1/2" (PF6u-T 1/2x1/2Mx1/2) | 3/4" x 3/4"M x 3/4" (PF6u-T 3/4x3/4Mx3/4) | 1" x 1"M x 1" (PF6u-T 1x1Mx1) | ||||
| 1 1/4" x 1 1/4"M x 1 1/4" (PF6u-T 1 1/4x1 1/4Mx1 1/4) | 1 1/2" x 1 1/2"M x 1 1/2" (PF6u-T 1 1/2x1 1/2Mx1 1/2) | 2" x 2"M x 2" (PF6u-T 2x2Mx2) | 2 1/2" x 2 1/2"M x 2 1/2" (PF6u-T 2 1/2x2 1/2Mx2 1/2) | ||||
| 3" x 3"M x 3" (PF6u-T 3x3Mx3) | |||||||
|
Male Unequal Elbow |
|||||||
| 3/8" x 1/2"M (PF6u-L 3/8x1/2M) | 1/2" x 3/8"M (PF6u-L 1/2x3/8M) | 1/2" x 3/4"M (PF6u-L 1/2x3/4M) | 1/2" x 1"M (PF6u-L 1/2x1M) | ||||
| 3/4" x 1/2"M (PF6u-L 3/4x1/2M) | 3/4" x 1"M (PF6u-L 3/4x1M) | 1" x 1/2"M (PF6u-L 1x1/2M) | 1" x 3/4"M (PF6u-L 1x3/4M) | ||||
| 1 1/4" x 3/4"M (PF6u-L 1 1/4x3/4M) | 1 1/4" x 1"M (PF6u-L 1 1/4x1M) | 1 1/2" x 1 1/4"M (PF6u-L 1 1/2x1 1/4M) | 2" x 1 1/4"M (PF6u-L 2x1 1/4M) | ||||
| 2" x 1 1/2"M (PF6u-L 2x1 1/2M) | 2 1/2" x 1 1/4"M (PF6u-L 2 1/2x1 1/4M) | 2 1/2" x 1 1/2"M (PF6u-L 2 1/2x1 1/2M) | 3" x 2"M (PF6u-L 3x2M) | ||||
| 3" x 2 1/2"M (PF6u-L 3x2 1/2M) | |||||||
|
Male Unequal Straight |
|||||||
| 3/8" x 1/2"M (PF6u-S 3/8x1/2M) | 1/2" x 3/8"M (PF6u-S 1/2x3/8M) | 1/2" x 3/4"M (PF6u-S 1/2x3/4M) | 1/2" x 1"M (PF6u-S 1/2x1M) | ||||
| 3/4" x 1/2"M (PF6u-S 3/4x1/2M) | 3/4" x 1"M (PF6u-S 3/4x1M) | 1" x 1/2"M (PF6u-S 1x1/2M) | 1" x 3/4"M (PF6u-S 1x3/4M) | ||||
| 1 1/4" x 3/4"M (PF6u-S1 1/4x3/4M) | 1 1/4" x 1"M (PF6u-S 1 1/4x1M) | 1 1/2" x 1 1/4"M (PF6u-S 1 1/2x1 1/4M) | 2" x 1 1/4"M (PF6u-S 2x1 1/4M) | ||||
| 2" x 1 1/2"M (PF6u-S 2x1 1/2M) | 2 1/2" x 1 1/4"M (PF6u-S 2 1/2x1 1/4M) | 2 1/2" x 1 1/2"M (PF6u-S 2 1/2x1 1/2M) | 3" x 2"M (PF6u-S 3x2M) | ||||
| 3" x 2 1/2"M (PF6u-S 3x2 1/2M) | |||||||
|
Male Unequal Tee |
|||||||
| 3/8" x 1/2"M x 3/8" (PF6u-T 3/8x1/2Mx3/8) | 1/2" x 3/8"M x 3/8" (PF6u-T 1/2x3/8Mx3/8) | 1/2" x 3/8"M x 1/2" (PF6u-T 1/2x3/8Mx1/2) | 1/2" x 1/2"M x 3/8" (PF6u-T 1/2x1/2Mx3/8) | ||||
| 1/2" x 3/4"M x 1/2" (PF6u-T 1/2x3/4Mx1/2) | 1/2" x 1"M x 1/2" (PF6u-T 1/2x1Mx1/2) | 3/4" x 1/2"M x 1/2" (PF6u-T 3/4x1/2Mx1/2) | 3/4" x 1/2"M x 3/4" (PF6u-T 3/4x1/2Mx3/4) | ||||
| 3/4" x 3/4"M x 1/2" (PF6u-T 3/4x3/4Mx1/2) | 3/4" x 1"M x 3/4" (PF6u-T 3/4x1Mx3/4) | 1" x 1/2"M x 1/2" (PF6u-T 1x1/2Mx1/2) | 1" x 1/2"M x 1" (PF6u-T 1x1/2Mx1) | ||||
| 1" x 3/4"M x 3/4" (PF6u-T 1x3/4Mx3/4) | 1" x 3/4"M x 1" (PF6u-T 1x3/4Mx1) | 1" x 1"M x 1/2" (PF6u-T 1x1Mx1/2) | 1" x 1"M x 3/4" (PF6u-T 1x1Mx3/4) | ||||
|
Unequal Elbow |
|||||||
| 3/8" x 1/2" (PF6u-L 3/8x1/2) | 1/2" x 3/4" (PF6u-L 1/2x3/4) | 1/2" x 1" (PF6u-L 1/2x1) | 3/4" x 1" (PF6u-L 3/4x1) | ||||
| 1 1/4" x 3/4" (PF6u-L 1 1/4x3/4) | 1 1/4" x 1" (PF6u-L 1 1/4x1) | 1 1/2" x 1 1/4" (PF6u-L 1 1/2x1 1/4) | 2" x 1 1/4" (PF6u-L 2x1 1/4) | ||||
| 2" x 1 1/2" (PF6u-L 2x1 1/2) | 2 1/2" x 1 1/4" (PF6u-L 2 1/2x1 1/4) | 2 1/2" x 1 1/2" (PF6u-L 2 1/2x1 1/2) | 3" x 2" (PF6u-L 3x2) | ||||
| 3" x 2 1/2" (PF6u-L 3x2 1/2) | |||||||
|
Unequal Straight |
|||||||
| 3/8" x 1/2" (PF6u-S 3/8x1/2) | 1/2" x 3/4" (PF6u-S 1/2x3/4) | 1/2" x 1" (PF6u-S 1/2x1) | 3/4" x 1" (PF6u-S 3/4x1) | ||||
| 1 1/4" x 3/4" (PF6u-S 1 1/4x3/4) | 1 1/4" x 1" (PF6u-S 1 1/4x1) | 1 1/2"x3/4" (PF6u-s 1 1/2x3/4) | 1 1/2" x 1" (PF6u-s 1 1/2x1) | ||||
| 1 1/2" x 1 1/4" (PF6u-S 1 1/2x1 1/4) | 2" x 1 1/4" (PF6u-S 2x1 1/4) | 2" x 1 1/2" (PF6u-S 2x1 1/2) | 2 1/2" x 1 1/4" (PF6u-S 2 1/2x1 1/4) | ||||
| 2 1/2" x 1 1/2" (PF6u-S 2 1/2x1 1/2) | 3" x 2" (PF6u-S 3x2) | 3" x 2 1/2" (PF6u-S 3x2 1/2) | |||||
|
Unequal Tee |
|||||||
| 3/8" x 1/2" x 3/8" (PF6u-T 3/8x1/2x3/8) | 1/2" x 3/8" x 3/8" (PF6u-T 1/2x3/8x3/8) | 1/2" x 3/8" x 1/2" (PF6u-T 1/2x3/8x1/2) | 1/2" x 1/2" x 3/8" (PF6u-T 1/2x1/2x3/8) | ||||
| 1/2" x 3/4" x 1/2" (PF6u-T 1/2x3/4x1/2) | 1/2" x 1" x 1/2" (PF6u-T 1/2x1x1/2) | 3/4" x 3/8" x 1/2" (PF6u-T 3/4x3/8x1/2) | 3/4" x 1/2" x 3/8" (PF6u-T 3/4x1/2x3/8) | ||||
| 3/4" x 1/2" x 1/2" (PF6u-T 3/4x1/2x1/2) | 3/4" x 1/2" x 3/4" (PF6u-T 3/4x1/2x3/4) | 3/4" x 3/4" x 1/2" (PF6u-T 3/4x3/4x1/2) | 3/4" x 3/4" x 1 1/4" (PF6u-T 3/4x3/4x1 1/4) | ||||
| 3/4" x 3/4" x 1 1/2" (PF6u-T 3/4x3/4x1 1/2) | 3/4" x 1" x 3/4" (PF6u-T 3/4x1x3/4) | 1" x 1/2" x 1/2" (PF6u-T 1x1/2x1/2) | 1" x 1/2" x 3/4" (PF6u-T 1x1/2x3/4) | ||||
| 1" x 1/2" x 1" (PF6u-T 1x1/2x1) | 1" x 3/4" x 1/2" (PF6u-T 1x3/4x1/2) | 1" x 3/4" x 3/4" (PF6u-T 1x3/4x3/4) | 1" x 3/4" x 1" (PF6u-T 1x3/4x1) | ||||
| 1" x 1" x 1/2" (PF6u-T 1x1x1/2) | 1" x 1" x 3/4" (PF6u-T 1x1x3/4) | 1" x 1" x 1 1/2" (PF6u-T 1x1x1 1/2) | 1" x 1" x 2" (PF6u-T 1x1x2) | ||||
| 1 1/4" x 1/2" x 1 1/4" (PF6u-T 1 1/4x1/2x1 1/4) | 1 1/4" x 3/4" x 1" (PF6u-T 1 1/4x3/4x1) | 1 1/4" x 3/4" x 1 1/4" (PF6u-T 1 1/4x3/4x1 1/4) | 1 1/4" x 1" x 3/4" (PF6u-T 1 1/4x1x3/4) | ||||
| 1 1/4" x 1" x 1 1/4" (PF6u-T 1 1/4x1x1 1/4) | 1 1/4" x 1 1/4" x 3/4" (PF6u-T 1 1/4x1 1/4x3/4) | 1 1/4" x 1 1/4" x 1" (PF6u-T 1 1/4x1 1/4x1) | 1 1/4" x 1 1/4" x 1 1/2" (PF6u-T 1 1/4x1 1/4x1 1/2) | ||||
| 1 1/2" x 1/2" x 1 1/2" (PF6u-T 1 1/2x1/2x1 1/2) | 1 1/2" x 3/4" x 1" (PF6u-T 1 1/2x3/4x1) | 1 1/2" x 3/4" x 1 1/4" (PF6u-T 1 1/2x3/4x1 1/4) | 1 1/2" x 3/4" x 1 1/2" (PF6u-T 1 1/2x3/4x1 1/2) | ||||
| 1 1/2" x 1" x 3/4" (PF6u-T 1 1/2x1x3/4) | 1 1/2" x 1" x 1 1/4" (PF6u-T 1 1/2x1x1 1/4) | 1 1/2" x 1" x 1 1/2" (PF6u-T 1 1/2x1x1 1/2) | 1 1/2" x 1 1/4" x 1" (PF6u-T 1 1/2x1 1/4x1) | ||||
| 1 1/2" x 1 1/4" x 1 1/2" (PF6u-T 1 1/2x1 1/4x1 1/2) | 1 1/2" x 1 1/2" x 3/4" (PF6u-T 1 1/2x1 1/2x3/4) | 1 1/2" x 1 1/2" x 1" (PF6u-T 1 1/2x1 1/2x1) | 1 1/2" x 1 1/2" x 1 1/4" (PF6u-T 1 1/2x1 1/2x1 1/4) | ||||
| 2" x 1/2" x 2" (PF6u-T 2x1/2x2) | 2" x 3/4" x 1 1/2" (PF6u-T 2x3/4x1 1/2) | 2" x 3/4" x 2" (PF6u-T 2x3/4x2) | 2" x 1" x 1 1/2" (PF6u-T 2x1x1 1/2) | ||||
| 2" x 1" x 2" (PF6u-T 2x1x2) | 2" x 1 1/4" x 1 1/2" (PF6u-T 2x1 1/4x1 1/2) | 2" x 1 1/4" x 2" (PF6u-T 2x1 1/4x2) | 2" x 1 1/2" x 3/4" (PF6u-T 2x1 1/2x3/4) | ||||
| 2" x 1 1/2" x 1 1/4" (PF6u-T 2x1 1/2x1 1/4) | 2" x 1 1/2" x 1 1/2" (PF6u-T 2x1 1/2x1 1/2) | 2" x 1 1/2" x 2" (PF6u-T 2x1 1/2x2) | 2" x 2" x 1 1/2" (PF6u-T 2x2x1 1/2) | ||||
| 2" x 2" x 2 1/2" (PF6u-T 2x2x2 1/2) | 2" x 2" x 3" (PF6u-T 2x2x3) | 2 1/2" x 3/4" x 2 1/2" (PF6u-T 2 1/2x3/4x2 1/2) | 2 1/2" x 1" x 2 1/2" (PF6u-T 2 1/2x1x2 1/2) | ||||
| 2 1/2" x 1 1/4" x 2 1/2" (PF6u-T 2 1/2x1 1/4x2 1/2) | 2 1/2" x 1 1/2" x 2" (PF6u-T 2 1/2x1 1/2x2) | 2 1/2" x 1 1/2" x 2 1/2" (PF6u-T 2 1/2x1 1/2x2 1/2) | 2 1/2" x 2" x 1 1/2" (PF6u-T 2 1/2x2x1 1/2) | ||||
| 2 1/2" x 2" x 2 1/2" (PF6u-T 2 1/2x2x2 1/2) | 2 1/2" x 2 1/2" x 1 1/2" (PF6u-T 2 1/2x2 1/2x1 1/2) | 2 1/2" x 2 1/2" x 2" (PF6u-T 2 1/2x2 1/2x2) | 2 1/2" x 2 1/2" x 3" (PF6u-T 2 1/2x2 1/2x3) | ||||
| 3" x 3/4" x 3" (PF6u-T 3x3/4x3) | 3" x 1" x 3" (PF6u-T 3x1x3) | 3" x 1 1/4" x 3" (PF6u-T 3x1 1/4x3) | 3" x 1 1/2" x 2 1/2" (PF6u-T 3x1 1/2x2 1/2) | ||||
| 3" x 1 1/2" x 3" (PF6u-T 3x1 1/2x3) | 3" x 2" x 2 1/2" (PF6u-T 3x2x2 1/2) | 3" x 2" x 3" (PF6u-T 3x2x3) | 3" x 2 1/2" x 1 1/2" (PF6u-T 3x2 1/2x1 1/2) | ||||
| 3" x 2 1/2" x 3" (PF6u-T 3x2 1/2x3) | 3" x 3" x 2" (PF6u-T 3x3x2) | 3" x 3" x 2 1/2" (PF6u-T 3x3x2 1/2) | |||||
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
|||||||
Fittings¢ +++ [G] |
PPSU |
XPAND |
CSA B137.5 |
||||
|
End Cap |
|||||||
| 3/8" (PF6u-D 3/8) | 1/2" (PF6u-D 1/2) | 3/4" (PF6u-D 3/4) | 1" (PF6u-D 1) | ||||
| 1 1/4" (PF6u-D 1 1/4) | 1 1/2" (PF6u-D 1 1/2) | 2" (PF6u-D 2) | 2 1/2" (PF6u-D 2 1/2) | ||||
| 3" (PF6u-D 3) | |||||||
|
Equal Elbow |
|||||||
| 3/8" (PF6u-L 3/8x3/8) | 1/2" (PF6u-L 1/2x1/2) | 3/4" (PF6u-L 3/4x3/4) | 1" (PF6u-L 1x1) | ||||
| 1 1/4" (PF6u-L 1 1/4x1 1/4) | 1 1/2" (PF6u-L 1 1/2x1 1/2) | 2" (PF6u-L 2x2) | 2 1/2" (PF6u-L 2 1/2x2 1/2) | ||||
| 3" (PF6u-L 3x3) | |||||||
|
Equal Straight |
|||||||
| 3/8" (PF6u-S 3/8x3/8) | 1/2" (PF6u-S 1/2x1/2) | 3/4" (PF6u-S 3/4x3/4) | 1" (PF6u-S 1x1) | ||||
| 1 1/4" (PF6u-S 1 1/4x1 1/4) | 1 1/2" (PF6u-S 1 1/2x1 1/2) | 2" (PF6u-S 2x2) | 2 1/2" (PF6u-S 2 1/2x2 1/2) | ||||
| 3" (PF6u-S 3x3) | |||||||
|
Equal Tee |
|||||||
| 3/8" (PF6u-T 3/8x3/8x3/8) | 1/2" (PF6u-T 1/2x1/2x1/2) | 3/4" (PF6u-T 3/4x3/4x3/4) | 1" (PF6u-T 1x1x1) | ||||
| 1 1/4" (PF6u-T 1 1/4x1 1/4x1 1/4) | 1 1/2" (PF6u-T 1 1/2x1 1/2x1 1/2) | 2" (PF6u-T 2x2x2) | 2 1/2" (PF6u-T 2 1/2x2 1/2x2 1/2) | ||||
| 3" (PF6u-T 3x3x3) | |||||||
|
Female Equal Elbow |
|||||||
| 3/8" x 3/8"F (PF6u-L 3/8x3/8F) | 1/2" x 1/2"F (PF6u-L 1/2x1/2F) | 3/4" x 3/4"F (PF6u-L 3/4x3/4F) | 1" x 1"F (PF6u-L 1x1F) | ||||
|
Female Equal Straight |
|||||||
| 3/8" x 3/8"F (PF6u-S 3/8x3/8F) | 1/2" x 1/2"F (PF6u-S 1/2x1/2F) | 3/4" x 3/4"F (PF6u-S 3/4x3/4F) | 1" x 1"F (PF6u-S 1x1F) | ||||
| 1 1/4" x 1 1/4"F (PF6u-S 1 1/4x1 1/4F) | 1 1/2" x 1 1/2"F (PF6u-S 1 1/2x1 1/2F) | 2"x 2"F (PF6u-S 2x2F) | 2 1/2" x 2 1/2"F (PF6u-S 2 1/2x2 1/2F) | ||||
| 3"x 3"F (PF6u-S 3x3F) | |||||||
|
Female Equal Tee |
|||||||
| 3/8" x 3/8"F x 3/8" (PF6u-T 3/8x3/8Fx3/8) | 1/2" x 1/2"F x 1/2" (PF6u-T 1/2x1/2Fx1/2) | 3/4" x 3/4"F x 3/4" (PF6u-T 3/4x3/4Fx3/4) | 1" x 1"F x 1" (PF6u-T 1x1Fx1) | ||||
|
Female Unequal Elbow |
|||||||
| 3/8" x 1/2"F (PF6u-L 3/8x1/2F) | 1/2" x 3/8"F (PF6u-L 1/2x3/8F) | 1/2" x 3/4"F (PF6u-L 1/2x3/4F) | 1/2" x 1"F (PF6u-L 1/2x1F) | ||||
| 3/4" x 1/2"F (PF6u-L 3/4x1/2F) | 3/4" x 1"F (PF6u-L 3/4x1F) | 1" x 1/2"F (PF6u-L 1x1/2F) | 1" x 3/4"F (PF6u-L 1x3/4F) | ||||
|
Female Unequal Straight |
|||||||
| 3/8" x 1/2"F (PF6u-S 3/8x1/2F) | 1/2" x 3/4"F (PF6u-S 1/2x3/4F) | 1/2" x 1"F (PF6u-S 1/2x1F) | 3/4" x 1"F (PF6u-S 3/4x1F) | ||||
| 1 1/4" x 3/4"F (PF6u-S 1 1/4x3/4F) | 1 1/4" x 1"F (PF6u-S 1 1/4x1F) | 1 1/2" x 1 1/4"F (PF6u-S 1 1/2x1 1/4F) | 2" x 1 1/4"F (PF6u-S 2x1 1/4F) | ||||
| 2" x 1 1/2"F (PF6u-S 2x1 1/2F) | 2 1/2" x 1 1/4"F (PF6u-S 2 1/2x1 1/4F) | 2 1/2" x 1 1/2"F (PF6u-S 2 1/2x1 1/2F) | 3" x 2"F (PF6u-S 3x2F) | ||||
| 3" x 2 1/2"F (PF6u-S 3x2 1/2F) | |||||||
|
Female Unequal Tee |
|||||||
| 3/8" x 1/2"F x 3/8" (PF6u-T 3/8x1/2Fx3/8) | 1/2" x 3/8"F x 3/8" (PF6u-T 1/2x3/8Fx3/8) | 1/2" x 3/8"F x 1/2" (PF6u-T 1/2x3/8Fx1/2) | 1/2" x 1/2"F x 3/8" (PF6u-T 1/2x1/2Fx3/8) | ||||
| 1/2" x 3/4"F x 1/2" (PF6u-T 1/2x3/4Fx1/2) | 1/2" x 1"F x 1/2" (PF6u-T 1/2x1Fx1/2) | 3/4" x 1/2"F x 1/2" (PF6u-T 3/4x1/2Fx1/2) | 3/4" x 1/2"F x 3/4" (PF6u-T 3/4x1/2Fx3/4) | ||||
| 3/4" x 3/4"F x 1/2" (PF6u-T 3/4x3/4Fx1/2) | 3/4" x 1"F x 3/4" (PF6u-T 3/4x1Fx3/4) | 1" x 1/2"F x 1/2" (PF6u-T 1x1/2Fx1/2) | 1" x 1/2"F x 1" (PF6u-T 1x1/2Fx1) | ||||
| 1" x 3/4"F x 3/4" (PF6u-T 1x3/4Fx3/4) | 1" x 3/4"F x 1" (PF6u-T 1x3/4Fx1) | 1" x 1"F x 1/2" (PF6u-T 1x1Fx1/2) | 1" x 1"F x 3/4" (PF6u-T 1x1Fx3/4) | ||||
|
Male Equal Elbow |
|||||||
| 3/8" x 3/8"M (PF6u-L 3/8x3/8M) | 1/2" x 1/2"M (PF6u-L 1/2x1/2M) | 3/4" x 3/4"M (PF6u-L 3/4x3/4M) | 1" x 1"M (PF6u-L 1x1M) | ||||
| 1 1/4" x 1 1/4"M (PF6u-L 1 1/4x1 1/4M) | 1 1/2" x 1 1/2"M (PF6u-L 1 1/2x1 1/2M) | 2" x 2"M (PF6u-L 2x2M) | 2 1/2" x 2 1/2"M (PF6u-L 2 1/2x2 1/2M) | ||||
| 3" x 3"M (PF6u-L 3x3M) | |||||||
|
Male Equal Straight |
|||||||
| 3/8" x 3/8"M (PF6u-S 3/8x3/8M) | 1/2" x 1/2"M (PF6u-S 1/2x1/2M) | 3/4" x 3/4"M (PF6u-S 3/4x3/4M) | 1" x 1"M (PF6u-S 1x1M) | ||||
| 1 1/4" x 1 1/4"M (PF6u-S 1 1/4x1 1/4M) | 1 1/2" x 1 1/2"M (PF6u-S 1 1/2x1 1/2M) | 2" x 2"M (PF6u-S 2x2M) | 2 1/2" x 2 1/2"M (PF6u-S 2 1/2x2 1/2M) | ||||
| 3" x 3"M (PF6u-S 3x3M) | |||||||
|
Male Equal Tee |
|||||||
| 3/8" x 3/8"M x 3/8" (PF6u-T 3/8x3/8Mx3/8) | 1/2" x 1/2"M x 1/2" (PF6u-T 1/2x1/2Mx1/2) | 3/4" x 3/4"M x 3/4" (PF6u-T 3/4x3/4Mx3/4) | 1" x 1"M x 1" (PF6u-T 1x1Mx1) | ||||
| 1 1/4" x 1 1/4"M x 1 1/4" (PF6u-T 1 1/4x1 1/4Mx1 1/4) | 1 1/2" x 1 1/2"M x 1 1/2" (PF6u-T 1 1/2x1 1/2Mx1 1/2) | 2" x 2"M x 2" (PF6u-T 2x2Mx2) | 2 1/2" x 2 1/2"M x 2 1/2" (PF6u-T 2 1/2x2 1/2Mx2 1/2) | ||||
| 3" x 3"M x 3" (PF6u-T 3x3Mx3) | |||||||
|
Male Unequal Elbow |
|||||||
| 3/8" x 1/2"M (PF6u-L 3/8x1/2M) | 1/2" x 3/8"M (PF6u-L 1/2x3/8M) | 1/2" x 3/4"M (PF6u-L 1/2x3/4M) | 1/2" x 1"M (PF6u-L 1/2x1M) | ||||
| 3/4" x 1/2"M (PF6u-L 3/4x1/2M) | 3/4" x 1"M (PF6u-L 3/4x1M) | 1" x 1/2"M (PF6u-L 1x1/2M) | 1" x 3/4"M (PF6u-L 1x3/4M) | ||||
| 1 1/4" x 3/4"M (PF6u-L 1 1/4x3/4M) | 1 1/4" x 1"M (PF6u-L 1 1/4x1M) | 1 1/2" x 1 1/4"M (PF6u-L 1 1/2x1 1/4M) | 2" x 1 1/4"M (PF6u-L 2x1 1/4M) | ||||
| 2" x 1 1/2"M (PF6u-L 2x1 1/2M) | 2 1/2" x 1 1/4"M (PF6u-L 2 1/2x1 1/4M) | 2 1/2" x 1 1/2"M (PF6u-L 2 1/2x1 1/2M) | 3" x 2"M (PF6u-L 3x2M) | ||||
| 3" x 2 1/2"M (PF6u-L 3x2 1/2M) | |||||||
|
Male Unequal Straight |
|||||||
| 3/8" x 1/2"M (PF6u-S 3/8x1/2M) | 1/2" x 3/8"M (PF6u-S 1/2x3/8M) | 1/2" x 3/4"M (PF6u-S 1/2x3/4M) | 1/2" x 1"M (PF6u-S 1/2x1M) | ||||
| 3/4" x 1/2"M (PF6u-S 3/4x1/2M) | 3/4" x 1"M (PF6u-S 3/4x1M) | 1" x 1/2"M (PF6u-S 1x1/2M) | 1" x 3/4"M (PF6u-S 1x3/4M) | ||||
| 1 1/4" x 3/4"M (PF6u-S1 1/4x3/4M) | 1 1/4" x 1"M (PF6u-S 1 1/4x1M) | 1 1/2" x 1 1/4"M (PF6u-S 1 1/2x1 1/4M) | 2" x 1 1/4"M (PF6u-S 2x1 1/4M) | ||||
| 2" x 1 1/2"M (PF6u-S 2x1 1/2M) | 2 1/2" x 1 1/4"M (PF6u-S 2 1/2x1 1/4M) | 2 1/2" x 1 1/2"M (PF6u-S 2 1/2x1 1/2M) | 3" x 2"M (PF6u-S 3x2M) | ||||
| 3" x 2 1/2"M (PF6u-S 3x2 1/2M) | |||||||
|
Male Unequal Tee |
|||||||
| 3/8" x 1/2"M x 3/8" (PF6u-T 3/8x1/2Mx3/8) | 1/2" x 3/8"M x 3/8" (PF6u-T 1/2x3/8Mx3/8) | 1/2" x 3/8"M x 1/2" (PF6u-T 1/2x3/8Mx1/2) | 1/2" x 1/2"M x 3/8" (PF6u-T 1/2x1/2Mx3/8) | ||||
| 1/2" x 3/4"M x 1/2" (PF6u-T 1/2x3/4Mx1/2) | 1/2" x 1"M x 1/2" (PF6u-T 1/2x1Mx1/2) | 3/4" x 1/2"M x 1/2" (PF6u-T 3/4x1/2Mx1/2) | 3/4" x 1/2"M x 3/4" (PF6u-T 3/4x1/2Mx3/4) | ||||
| 3/4" x 3/4"M x 1/2" (PF6u-T 3/4x3/4Mx1/2) | 3/4" x 1"M x 3/4" (PF6u-T 3/4x1Mx3/4) | 1" x 1/2"M x 1/2" (PF6u-T 1x1/2Mx1/2) | 1" x 1/2"M x 1" (PF6u-T 1x1/2Mx1) | ||||
| 1" x 3/4"M x 3/4" (PF6u-T 1x3/4Mx3/4) | 1" x 3/4"M x 1" (PF6u-T 1x3/4Mx1) | 1" x 1"M x 1/2" (PF6u-T 1x1Mx1/2) | 1" x 1"M x 3/4" (PF6u-T 1x1Mx3/4) | ||||
|
Unequal Elbow |
|||||||
| 3/8" x 1/2" (PF6u-L 3/8x1/2) | 1/2" x 3/4" (PF6u-L 1/2x3/4) | 1/2" x 1" (PF6u-L 1/2x1) | 3/4" x 1" (PF6u-L 3/4x1) | ||||
| 1 1/4" x 3/4" (PF6u-L 1 1/4x3/4) | 1 1/4" x 1" (PF6u-L 1 1/4x1) | 1 1/2" x 1 1/4" (PF6u-L 1 1/2x1 1/4) | 2" x 1 1/4" (PF6u-L 2x1 1/4) | ||||
| 2" x 1 1/2" (PF6u-L 2x1 1/2) | 2 1/2" x 1 1/4" (PF6u-L 2 1/2x1 1/4) | 2 1/2" x 1 1/2" (PF6u-L 2 1/2x1 1/2) | 3" x 2" (PF6u-L 3x2) | ||||
| 3" x 2 1/2" (PF6u-L 3x2 1/2) | |||||||
|
Unequal Straight |
|||||||
| 3/8" x 1/2" (PF6u-S 3/8x1/2) | 1/2" x 3/4" (PF6u-S 1/2x3/4) | 1/2" x 1" (PF6u-S 1/2x1) | 3/4" x 1" (PF6u-S 3/4x1) | ||||
| 1 1/4" x 3/4" (PF6u-S 1 1/4x3/4) | 1 1/4" x 1" (PF6u-S 1 1/4x1) | 1 1/2"x3/4" (PF6u-s 1 1/2x3/4) | 1 1/2" x 1" (PF6u-s 1 1/2x1) | ||||
| 1 1/2" x 1 1/4" (PF6u-S 1 1/2x1 1/4) | 2" x 1 1/4" (PF6u-S 2x1 1/4) | 2" x 1 1/2" (PF6u-S 2x1 1/2) | 2 1/2" x 1 1/4" (PF6u-S 2 1/2x1 1/4) | ||||
| 2 1/2" x 1 1/2" (PF6u-S 2 1/2x1 1/2) | 3" x 2" (PF6u-S 3x2) | 3" x 2 1/2" (PF6u-S 3x2 1/2) | |||||
|
Unequal Tee |
|||||||
| 3/8" x 1/2" x 3/8" (PF6u-T 3/8x1/2x3/8) | 1/2" x 3/8" x 3/8" (PF6u-T 1/2x3/8x3/8) | 1/2" x 3/8" x 1/2" (PF6u-T 1/2x3/8x1/2) | 1/2" x 1/2" x 3/8" (PF6u-T 1/2x1/2x3/8) | ||||
| 1/2" x 3/4" x 1/2" (PF6u-T 1/2x3/4x1/2) | 1/2" x 1" x 1/2" (PF6u-T 1/2x1x1/2) | 3/4" x 3/8" x 1/2" (PF6u-T 3/4x3/8x1/2) | 3/4" x 1/2" x 3/8" (PF6u-T 3/4x1/2x3/8) | ||||
| 3/4" x 1/2" x 1/2" (PF6u-T 3/4x1/2x1/2) | 3/4" x 1/2" x 3/4" (PF6u-T 3/4x1/2x3/4) | 3/4" x 3/4" x 1/2" (PF6u-T 3/4x3/4x1/2) | 3/4" x 3/4" x 1 1/4" (PF6u-T 3/4x3/4x1 1/4) | ||||
| 3/4" x 3/4" x 1 1/2" (PF6u-T 3/4x3/4x1 1/2) | 3/4" x 1" x 3/4" (PF6u-T 3/4x1x3/4) | 1" x 1/2" x 1/2" (PF6u-T 1x1/2x1/2) | 1" x 1/2" x 3/4" (PF6u-T 1x1/2x3/4) | ||||
| 1" x 1/2" x 1" (PF6u-T 1x1/2x1) | 1" x 3/4" x 1/2" (PF6u-T 1x3/4x1/2) | 1" x 3/4" x 3/4" (PF6u-T 1x3/4x3/4) | 1" x 3/4" x 1" (PF6u-T 1x3/4x1) | ||||
| 1" x 1" x 1/2" (PF6u-T 1x1x1/2) | 1" x 1" x 3/4" (PF6u-T 1x1x3/4) | 1" x 1" x 1 1/2" (PF6u-T 1x1x1 1/2) | 1" x 1" x 2" (PF6u-T 1x1x2) | ||||
| 1 1/4" x 1/2" x 1 1/4" (PF6u-T 1 1/4x1/2x1 1/4) | 1 1/4" x 3/4" x 1" (PF6u-T 1 1/4x3/4x1) | 1 1/4" x 3/4" x 1 1/4" (PF6u-T 1 1/4x3/4x1 1/4) | 1 1/4" x 1" x 3/4" (PF6u-T 1 1/4x1x3/4) | ||||
| 1 1/4" x 1" x 1 1/4" (PF6u-T 1 1/4x1x1 1/4) | 1 1/4" x 1 1/4" x 3/4" (PF6u-T 1 1/4x1 1/4x3/4) | 1 1/4" x 1 1/4" x 1" (PF6u-T 1 1/4x1 1/4x1) | 1 1/4" x 1 1/4" x 1 1/2" (PF6u-T 1 1/4x1 1/4x1 1/2) | ||||
| 1 1/2" x 1/2" x 1 1/2" (PF6u-T 1 1/2x1/2x1 1/2) | 1 1/2" x 3/4" x 1" (PF6u-T 1 1/2x3/4x1) | 1 1/2" x 3/4" x 1 1/4" (PF6u-T 1 1/2x3/4x1 1/4) | 1 1/2" x 3/4" x 1 1/2" (PF6u-T 1 1/2x3/4x1 1/2) | ||||
| 1 1/2" x 1" x 3/4" (PF6u-T 1 1/2x1x3/4) | 1 1/2" x 1" x 1 1/4" (PF6u-T 1 1/2x1x1 1/4) | 1 1/2" x 1" x 1 1/2" (PF6u-T 1 1/2x1x1 1/2) | 1 1/2" x 1 1/4" x 1" (PF6u-T 1 1/2x1 1/4x1) | ||||
| 1 1/2" x 1 1/4" x 1 1/2" (PF6u-T 1 1/2x1 1/4x1 1/2) | 1 1/2" x 1 1/2" x 3/4" (PF6u-T 1 1/2x1 1/2x3/4) | 1 1/2" x 1 1/2" x 1" (PF6u-T 1 1/2x1 1/2x1) | 1 1/2" x 1 1/2" x 1 1/4" (PF6u-T 1 1/2x1 1/2x1 1/4) | ||||
| 2" x 1/2" x 2" (PF6u-T 2x1/2x2) | 2" x 3/4" x 1 1/2" (PF6u-T 2x3/4x1 1/2) | 2" x 3/4" x 2" (PF6u-T 2x3/4x2) | 2" x 1" x 1 1/2" (PF6u-T 2x1x1 1/2) | ||||
| 2" x 1" x 2" (PF6u-T 2x1x2) | 2" x 1 1/4" x 1 1/2" (PF6u-T 2x1 1/4x1 1/2) | 2" x 1 1/4" x 2" (PF6u-T 2x1 1/4x2) | 2" x 1 1/2" x 3/4" (PF6u-T 2x1 1/2x3/4) | ||||
| 2" x 1 1/2" x 1 1/4" (PF6u-T 2x1 1/2x1 1/4) | 2" x 1 1/2" x 1 1/2" (PF6u-T 2x1 1/2x1 1/2) | 2" x 1 1/2" x 2" (PF6u-T 2x1 1/2x2) | 2" x 2" x 1 1/2" (PF6u-T 2x2x1 1/2) | ||||
| 2" x 2" x 2 1/2" (PF6u-T 2x2x2 1/2) | 2" x 2" x 3" (PF6u-T 2x2x3) | 2 1/2" x 3/4" x 2 1/2" (PF6u-T 2 1/2x3/4x2 1/2) | 2 1/2" x 1" x 2 1/2" (PF6u-T 2 1/2x1x2 1/2) | ||||
| 2 1/2" x 1 1/4" x 2 1/2" (PF6u-T 2 1/2x1 1/4x2 1/2) | 2 1/2" x 1 1/2" x 2" (PF6u-T 2 1/2x1 1/2x2) | 2 1/2" x 1 1/2" x 2 1/2" (PF6u-T 2 1/2x1 1/2x2 1/2) | 2 1/2" x 2" x 1 1/2" (PF6u-T 2 1/2x2x1 1/2) | ||||
| 2 1/2" x 2" x 2 1/2" (PF6u-T 2 1/2x2x2 1/2) | 2 1/2" x 2 1/2" x 1 1/2" (PF6u-T 2 1/2x2 1/2x1 1/2) | 2 1/2" x 2 1/2" x 2" (PF6u-T 2 1/2x2 1/2x2) | 2 1/2" x 2 1/2" x 3" (PF6u-T 2 1/2x2 1/2x3) | ||||
| 3" x 3/4" x 3" (PF6u-T 3x3/4x3) | 3" x 1" x 3" (PF6u-T 3x1x3) | 3" x 1 1/4" x 3" (PF6u-T 3x1 1/4x3) | 3" x 1 1/2" x 2 1/2" (PF6u-T 3x1 1/2x2 1/2) | ||||
| 3" x 1 1/2" x 3" (PF6u-T 3x1 1/2x3) | 3" x 2" x 2 1/2" (PF6u-T 3x2x2 1/2) | 3" x 2" x 3" (PF6u-T 3x2x3) | 3" x 2 1/2" x 1 1/2" (PF6u-T 3x2 1/2x1 1/2) | ||||
| 3" x 2 1/2" x 3" (PF6u-T 3x2 1/2x3) | 3" x 3" x 2" (PF6u-T 3x3x2) | 3" x 3" x 2 1/2" (PF6u-T 3x3x2 1/2) | |||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
|||||||
Fittings+++ [G] |
PPSU |
XPAND |
ASTM F2159 |
||||
|
End Cap |
|||||||
| 3/8" (PF5u-D 3/8) | 1/2" (PF5u-D 1/2) | 3/4" (PF5u-D 3/4) | 1" (PF5u-D 1) | ||||
|
Equal Elbow |
|||||||
| 3/8" (PF5u-L 3/8x3/8) | 1/2" (PF5u-L 1/2x1/2) | 3/4" (PF5u-L 3/4x3/4) | 1" (PF5u-L 1x1) | ||||
|
Equal Straight |
|||||||
| 3/8" (PF5u-S 3/8x3/8) | 1/2" (PF5u-S 1/2x1/2) | 3/4" (PF5u-S 3/4x3/4) | 1" (PF5u-S 1x1) | ||||
|
Equal Tee |
|||||||
| 3/8" (PF5u-T 3/8x3/8x3/8) | 1/2" (PF5u-T 1/2x1/2x1/2) | 3/4" (PF5u-T 3/4x3/4x3/4) | 1" (PF5u-T 1x1x1) | ||||
|
Female Equal Elbow |
|||||||
| 3/8" x 3/8"F (PF5u-L 3/8x3/8F) | 1/2" x 1/2"F (PF5u-L 1/2x1/2F) | 3/4" x 3/4"F (PF5u-L 3/4x3/4F) | 1" x 1"F (PF5u-L 1x1F) | ||||
|
Female Equal Straight |
|||||||
| 3/8" x 3/8"F (PF5u-S 3/8x3/8F) | 1/2" x 1/2"F (PF5u-S 1/2x1/2F) | 3/4" x 3/4"F (PF5u-S 3/4x3/4F) | 1" x 1"F (PF5u-S 1x1F) | ||||
|
Female Equal Tee |
|||||||
| 3/8" x 3/8"F x 3/8" (PF5u-T 3/8x3/8Fx3/8) | 1/2" x 1/2"F x 1/2" (PF5u-T 1/2x1/2Fx1/2) | 3/4" x 3/4"F x 3/4" (PF5u-T 3/4x3/4Fx3/4) | 1" x 1"F x 1" (PF5u-T 1x1Fx1) | ||||
|
Female Unequal Elbow |
|||||||
| 3/8" x 1/2"F (PF5u-L 3/8x1/2F) | 1/2" x 3/8"F (PF5u-L 1/2x3/8F) | 1/2" x 3/4"F (PF5u-L 1/2x3/4F) | 1/2" x 1"F (PF5u-L 1/2x1F) | ||||
| 3/4" x 1/2"F (PF5u-L 3/4x1/2F) | 3/4" x 1"F (PF5u-L 3/4x1F) | 1" x 1/2"F (PF5u-L 1x1/2F) | 1" x 3/4"F (PF5u-L 1x3/4F) | ||||
|
Female Unequal Straight |
|||||||
| 3/8" x 1/2"F (PF5u-S 3/8x1/2F) | 1/2" x 3/4"F (PF5u-S 1/2x3/4F) | 3/4" x 1"F (PF5u-S 3/4x1F) | 1/2" x 1"F (PF5u-S 1/2x1F) | ||||
|
Female Unequal Tee |
|||||||
| 3/8" x 1/2"F x 3/8" (PF5u-T 3/8x1/2Fx3/8) | 1/2" x 3/8"F x 3/8" (PF5u-T 1/2x3/8Fx3/8) | 1/2" x 3/8"F x 1/2" (PF5u-T 1/2x3/8Fx1/2) | 1/2" x 1/2"F x 3/8" (PF5u-T 1/2x1/2Fx3/8) | ||||
| 1/2" x 3/4"F x 1/2" (PF5u-T 1/2x3/4Fx1/2) | 1/2" x 1"F x 1/2" (PF5u-T 1/2x1Fx1/2) | 3/4" x 1/2"F x 1/2" (PF5u-T 3/4x1/2Fx1/2) | 3/4" x 1/2"F x 3/4" (PF5u-T 3/4x1/2Fx3/4) | ||||
| 3/4" x 3/4"F x 1/2" (PF5u-T 3/4x3/4Fx1/2) | 3/4" x 1"F x 3/4" (PF5u-T 3/4x1Fx3/4) | 1" x 1/2"F x 1/2" (PF5u-T 1x1/2Fx1/2) | 1" x 1/2"F x 1" (PF5u-T 1x1/2Fx1) | ||||
| 1" x 3/4"F x 3/4" (PF5u-T 1x3/4Fx3/4) | 1" x 3/4"F x 1" (PF5u-T 1x3/4Fx1) | 1" x 1"F x 1/2" (PF5u-T 1x1Fx1/2) | 1" x 1"F x 3/4" (PF5u-T 1x1Fx3/4) | ||||
|
Male Equal Elbow |
|||||||
| 3/8" x 3/8"M (PF5u-L 3/8x3/8M) | 1/2" x 1/2"M (PF5u-L 1/2x1/2M) | 3/4" x 3/4"M (PF5u-L 3/4x3/4M) | 1" x 1"M (PF5u-L 1x1M) | ||||
|
Male Equal Straight |
|||||||
| 3/8" x 3/8"M (PF5u-S 3/8x3/8M) | 1/2" x 1/2"M (PF5u-S 1/2x1/2M) | 3/4" x 3/4"M (PF5u-S 3/4x3/4M) | 1" x 1"M (PF5u-S 1x1M) | ||||
|
Male Equal Tee |
|||||||
| 3/8" x 3/8"M x 3/8" (PF5u-T 3/8x3/8Mx3/8) | 1/2" x 1/2"M x 1/2" (PF5u-T 1/2x1/2Mx1/2) | 3/4" x 3/4"M x 3/4" (PF5u-T 3/4x3/4Mx3/4) | 1" x 1"M x 1" (PF5u-T 1x1Mx1) | ||||
|
Male Unequal Elbow |
|||||||
| 3/8" x 1/2"M (PF5u-L 3/8x1/2M) | 1/2" x 3/8"M (PF5u-L 1/2x3/8M) | 1/2" x 3/4"M (PF5u-L 1/2x3/4M) | 1/2" x 1"M (PF5u-L 1/2x1M) | ||||
| 3/4" x 1/2"M (PF5u-L 3/4x1/2M) | 3/4" x 1"M (PF5u-L 3/4x1M) | 1" x 1/2"M (PF5u-L 1x1/2M) | 1" x 3/4"M (PF5u-L 1x3/4M) | ||||
|
Male Unequal Straight |
|||||||
| 3/8" x 1/2"M (PF5u-S 3/8x1/2M) | 1/2" x 3/8"M (PF5u-S 1/2x3/8M) | 1/2" x 3/4"M (PF5u-S 1/2x3/4M) | 1/2" x 1"M (PF5u-S 1/2x1M) | ||||
| 3/4" x 1/2"M (PF5u-S 3/4x1/2M) | 3/4" x 1"M (PF5u-S 3/4x1M) | 1" x 1/2"M (PF5u-S 1x1/2M) | 1" x 3/4"M (PF5u-S 1x3/4M) | ||||
|
Male Unequal Tee |
|||||||
| 3/8" x 1/2"M x 3/8" (PF5u-T 3/8x1/2Mx3/8) | 1/2" x 3/8"M x 3/8" (PF5u-T 1/2x3/8Mx3/8) | 1/2" x 3/8"M x 1/2" (PF5u-T 1/2x3/8Mx1/2) | 1/2" x 1/2"M x 3/8" (PF5u-T 1/2x1/2Mx3/8) | ||||
| 1/2" x 3/4"M x 1/2" (PF5u-T 1/2x3/4Mx1/2) | 1/2" x 1"M x 1/2" (PF5u-T 1/2x1Mx1/2) | 3/4" x 1/2"M x 1/2" (PF5u-T 3/4x1/2Mx1/2) | 3/4" x 1/2"M x 3/4" (PF5u-T 3/4x1/2Mx3/4) | ||||
| 3/4" x 3/4"M x 1/2" (PF5u-T 3/4x3/4Mx1/2) | 3/4" x 1"M x 3/4" (PF5u-T 3/4x1Mx3/4) | 1" x 1/2"M x 1/2" (PF5u-T 1x1/2Mx1/2) | 1" x 1/2"M x 1" (PF5u-T 1x1/2Mx1) | ||||
| 1" x 3/4"M x 3/4" (PF5u-T 1x3/4Mx3/4) | 1" x 3/4"M x 1" (PF5u-T 1x3/4Mx1) | 1" x 1"M x 1/2" (PF5u-T 1x1Mx1/2) | 1" x 1"M x 3/4" (PF5u-T 1x1Mx3/4) | ||||
|
Unequal Elbow |
|||||||
| 3/8" x 1/2" (PF5u-L 3/8x1/2) | 1/2" x 3/4" (PF5u-L 1/2x3/4) | 1/2" x 1" (PF5u-L 1/2x1) | 3/4" x 1" (PF5u-L 3/4x1) | ||||
|
Unequal Straight |
|||||||
| 3/8" x 1/2" (PF5u-S 3/8x1/2) | 1/2" x 3/4" (PF5u-S 1/2x3/4) | 1/2" x 1" (PF5u-S 1/2x1) | 3/4" x 1" (PF5u-S 3/4x1) | ||||
|
Unequal Tee |
|||||||
| 3/8" x 1/2" x 3/8" (PF5u-T 3/8x1/2x3/8) | 1/2" x 3/8" x 3/8" (PF5u-T 1/2x3/8x3/8) | 1/2" x 3/8" x 1/2" (PF5u-T 1/2x3/8x1/2) | 1/2" x 1/2" x 3/8" (PF5u-T 1/2x1/2x3/8) | ||||
| 1/2" x 3/4" x 1/2" (PF5u-T 1/2x3/4x1/2) | 1/2" x 1" x 1/2" (PF5u-T 1/2x1x1/2) | 3/4" x 3/8" x 1/2" (PF5u-T 3/4x3/8x1/2) | 3/4" x 1/2" x 3/8" (PF5u-T 3/4x1/2x3/8) | ||||
| 3/4" x 1/2" x 1/2" (PF5u-T 3/4x1/2x1/2) | 3/4" x 1/2" x 3/4" (PF5u-T 3/4x1/2x3/4) | 3/4" x 3/4" x 1/2" (PF5u-T 3/4x3/4x1/2) | 3/4" x 1" x 3/4" (PF5u-T 3/4x1x3/4) | ||||
| 1" x 1/2" x 1/2" (PF5u-T 1x1/2x1/2) | 1" x 1/2" x 3/4" (PF5u-T 1x1/2x3/4) | 1" x 1/2" x 1" (PF5u-T 1x1/2x1) | 1" x 3/4" x 1/2" (PF5u-T 1x3/4x1/2) | ||||
| 1" x 3/4" x 3/4" (PF5u-T 1x3/4x3/4) | 1" x 3/4" x 1" (PF5u-T 1x3/4x1) | 1" x 1" x 1/2" (PF5u-T 1x1x1/2) | 1" x 1" x 3/4" (PF5u-T 1x1x3/4) | ||||
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
|||||||
Fittings+++ [G] |
PPSU |
XPAND |
CSA B137.5 |
||||
|
End Cap |
|||||||
| 3/8" (PF5u-D 3/8) | 1/2" (PF5u-D 1/2) | 3/4" (PF5u-D 3/4) | 1" (PF5u-D 1) | ||||
|
Equal Elbow |
|||||||
| 3/8" (PF5u-L 3/8x3/8) | 1/2" (PF5u-L 1/2x1/2) | 3/4" (PF5u-L 3/4x3/4) | 1" (PF5u-L 1x1) | ||||
|
Equal Straight |
|||||||
| 3/8" (PF5u-S 3/8x3/8) | 1/2" (PF5u-S 1/2x1/2) | 3/4" (PF5u-S 3/4x3/4) | 1" (PF5u-S 1x1) | ||||
|
Equal Tee |
|||||||
| 3/8" (PF5u-T 3/8x3/8x3/8) | 1/2" (PF5u-T 1/2x1/2x1/2) | 3/4" (PF5u-T 3/4x3/4x3/4) | 1" (PF5u-T 1x1x1) | ||||
|
Female Equal Elbow |
|||||||
| 3/8" x 3/8"F (PF5u-L 3/8x3/8F) | 1/2" x 1/2"F (PF5u-L 1/2x1/2F) | 3/4" x 3/4"F (PF5u-L 3/4x3/4F) | 1" x 1"F (PF5u-L 1x1F) | ||||
|
Female Equal Straight |
|||||||
| 3/8" x 3/8"F (PF5u-S 3/8x3/8F) | 1/2" x 1/2"F (PF5u-S 1/2x1/2F) | 3/4" x 3/4"F (PF5u-S 3/4x3/4F) | 1" x 1"F (PF5u-S 1x1F) | ||||
|
Female Equal Tee |
|||||||
| 3/8" x 3/8"F x 3/8" (PF5u-T 3/8x3/8Fx3/8) | 1/2" x 1/2"F x 1/2" (PF5u-T 1/2x1/2Fx1/2) | 3/4" x 3/4"F x 3/4" (PF5u-T 3/4x3/4Fx3/4) | 1" x 1"F x 1" (PF5u-T 1x1Fx1) | ||||
|
Female Unequal Elbow |
|||||||
| 3/8" x 1/2"F (PF5u-L 3/8x1/2F) | 1/2" x 3/8"F (PF5u-L 1/2x3/8F) | 1/2" x 3/4"F (PF5u-L 1/2x3/4F) | 1/2" x 1"F (PF5u-L 1/2x1F) | ||||
| 3/4" x 1/2"F (PF5u-L 3/4x1/2F) | 3/4" x 1"F (PF5u-L 3/4x1F) | 1" x 1/2"F (PF5u-L 1x1/2F) | 1" x 3/4"F (PF5u-L 1x3/4F) | ||||
|
Female Unequal Straight |
|||||||
| 3/8" x 1/2"F (PF5u-S 3/8x1/2F) | 1/2" x 3/4"F (PF5u-S 1/2x3/4F) | 3/4" x 1"F (PF5u-S 3/4x1F) | 1/2" x 1"F (PF5u-S 1/2x1F) | ||||
|
Female Unequal Tee |
|||||||
| 3/8" x 1/2"F x 3/8" (PF5u-T 3/8x1/2Fx3/8) | 1/2" x 3/8"F x 3/8" (PF5u-T 1/2x3/8Fx3/8) | 1/2" x 3/8"F x 1/2" (PF5u-T 1/2x3/8Fx1/2) | 1/2" x 1/2"F x 3/8" (PF5u-T 1/2x1/2Fx3/8) | ||||
| 1/2" x 3/4"F x 1/2" (PF5u-T 1/2x3/4Fx1/2) | 1/2" x 1"F x 1/2" (PF5u-T 1/2x1Fx1/2) | 3/4" x 1/2"F x 1/2" (PF5u-T 3/4x1/2Fx1/2) | 3/4" x 1/2"F x 3/4" (PF5u-T 3/4x1/2Fx3/4) | ||||
| 3/4" x 3/4"F x 1/2" (PF5u-T 3/4x3/4Fx1/2) | 3/4" x 1"F x 3/4" (PF5u-T 3/4x1Fx3/4) | 1" x 1/2"F x 1/2" (PF5u-T 1x1/2Fx1/2) | 1" x 1/2"F x 1" (PF5u-T 1x1/2Fx1) | ||||
| 1" x 3/4"F x 3/4" (PF5u-T 1x3/4Fx3/4) | 1" x 3/4"F x 1" (PF5u-T 1x3/4Fx1) | 1" x 1"F x 1/2" (PF5u-T 1x1Fx1/2) | 1" x 1"F x 3/4" (PF5u-T 1x1Fx3/4) | ||||
|
Male Equal Elbow |
|||||||
| 3/8" x 3/8"M (PF5u-L 3/8x3/8M) | 1/2" x 1/2"M (PF5u-L 1/2x1/2M) | 3/4" x 3/4"M (PF5u-L 3/4x3/4M) | 1" x 1"M (PF5u-L 1x1M) | ||||
|
Male Equal Straight |
|||||||
| 3/8" x 3/8"M (PF5u-S 3/8x3/8M) | 1/2" x 1/2"M (PF5u-S 1/2x1/2M) | 3/4" x 3/4"M (PF5u-S 3/4x3/4M) | 1" x 1"M (PF5u-S 1x1M) | ||||
|
Male Equal Tee |
|||||||
| 3/8" x 3/8"M x 3/8" (PF5u-T 3/8x3/8Mx3/8) | 1/2" x 1/2"M x 1/2" (PF5u-T 1/2x1/2Mx1/2) | 3/4" x 3/4"M x 3/4" (PF5u-T 3/4x3/4Mx3/4) | 1" x 1"M x 1" (PF5u-T 1x1Mx1) | ||||
|
Male Unequal Elbow |
|||||||
| 3/8" x 1/2"M (PF5u-L 3/8x1/2M) | 1/2" x 3/8"M (PF5u-L 1/2x3/8M) | 1/2" x 3/4"M (PF5u-L 1/2x3/4M) | 1/2" x 1"M (PF5u-L 1/2x1M) | ||||
| 3/4" x 1/2"M (PF5u-L 3/4x1/2M) | 3/4" x 1"M (PF5u-L 3/4x1M) | 1" x 1/2"M (PF5u-L 1x1/2M) | 1" x 3/4"M (PF5u-L 1x3/4M) | ||||
|
Male Unequal Straight |
|||||||
| 3/8" x 1/2"M (PF5u-S 3/8x1/2M) | 1/2" x 3/8"M (PF5u-S 1/2x3/8M) | 1/2" x 3/4"M (PF5u-S 1/2x3/4M) | 1/2" x 1"M (PF5u-S 1/2x1M) | ||||
| 3/4" x 1/2"M (PF5u-S 3/4x1/2M) | 3/4" x 1"M (PF5u-S 3/4x1M) | 1" x 1/2"M (PF5u-S 1x1/2M) | 1" x 3/4"M (PF5u-S 1x3/4M) | ||||
|
Male Unequal Tee |
|||||||
| 3/8" x 1/2"M x 3/8" (PF5u-T 3/8x1/2Mx3/8) | 1/2" x 3/8"M x 3/8" (PF5u-T 1/2x3/8Mx3/8) | 1/2" x 3/8"M x 1/2" (PF5u-T 1/2x3/8Mx1/2) | 1/2" x 1/2"M x 3/8" (PF5u-T 1/2x1/2Mx3/8) | ||||
| 1/2" x 3/4"M x 1/2" (PF5u-T 1/2x3/4Mx1/2) | 1/2" x 1"M x 1/2" (PF5u-T 1/2x1Mx1/2) | 3/4" x 1/2"M x 1/2" (PF5u-T 3/4x1/2Mx1/2) | 3/4" x 1/2"M x 3/4" (PF5u-T 3/4x1/2Mx3/4) | ||||
| 3/4" x 3/4"M x 1/2" (PF5u-T 3/4x3/4Mx1/2) | 3/4" x 1"M x 3/4" (PF5u-T 3/4x1Mx3/4) | 1" x 1/2"M x 1/2" (PF5u-T 1x1/2Mx1/2) | 1" x 1/2"M x 1" (PF5u-T 1x1/2Mx1) | ||||
| 1" x 3/4"M x 3/4" (PF5u-T 1x3/4Mx3/4) | 1" x 3/4"M x 1" (PF5u-T 1x3/4Mx1) | 1" x 1"M x 1/2" (PF5u-T 1x1Mx1/2) | 1" x 1"M x 3/4" (PF5u-T 1x1Mx3/4) | ||||
|
Unequal Elbow |
|||||||
| 3/8" x 1/2" (PF5u-L 3/8x1/2) | 1/2" x 3/4" (PF5u-L 1/2x3/4) | 1/2" x 1" (PF5u-L 1/2x1) | 3/4" x 1" (PF5u-L 3/4x1) | ||||
|
Unequal Straight |
|||||||
| 3/8" x 1/2" (PF5u-S 3/8x1/2) | 1/2" x 3/4" (PF5u-S 1/2x3/4) | 1/2" x 1" (PF5u-S 1/2x1) | 3/4" x 1" (PF5u-S 3/4x1) | ||||
|
Unequal Tee |
|||||||
| 3/8" x 1/2" x 3/8" (PF5u-T 3/8x1/2x3/8) | 1/2" x 3/8" x 3/8" (PF5u-T 1/2x3/8x3/8) | 1/2" x 3/8" x 1/2" (PF5u-T 1/2x3/8x1/2) | 1/2" x 1/2" x 3/8" (PF5u-T 1/2x1/2x3/8) | ||||
| 1/2" x 3/4" x 1/2" (PF5u-T 1/2x3/4x1/2) | 1/2" x 1" x 1/2" (PF5u-T 1/2x1x1/2) | 3/4" x 3/8" x 1/2" (PF5u-T 3/4x3/8x1/2) | 3/4" x 1/2" x 3/8" (PF5u-T 3/4x1/2x3/8) | ||||
| 3/4" x 1/2" x 1/2" (PF5u-T 3/4x1/2x1/2) | 3/4" x 1/2" x 3/4" (PF5u-T 3/4x1/2x3/4) | 3/4" x 3/4" x 1/2" (PF5u-T 3/4x3/4x1/2) | 3/4" x 1" x 3/4" (PF5u-T 3/4x1x3/4) | ||||
| 1" x 1/2" x 1/2" (PF5u-T 1x1/2x1/2) | 1" x 1/2" x 3/4" (PF5u-T 1x1/2x3/4) | 1" x 1/2" x 1" (PF5u-T 1x1/2x1) | 1" x 3/4" x 1/2" (PF5u-T 1x3/4x1/2) | ||||
| 1" x 3/4" x 3/4" (PF5u-T 1x3/4x3/4) | 1" x 3/4" x 1" (PF5u-T 1x3/4x1) | 1" x 1" x 1/2" (PF5u-T 1x1x1/2) | 1" x 1" x 3/4" (PF5u-T 1x1x3/4) | ||||
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
|||||||
Manifolds+++ [2] [G] |
PPSU |
XPAND |
ASTM F2159 |
||||
|
Branch Multi-port Tee |
|||||||
| 3/4" (FS9(PF5u)-3/4-Dx1/2xn) | 1" (FS9(PF6u)-1-Dx1/2xn) | ||||||
|
Branch Opposing Multi-port Tee |
|||||||
| 3/4" (FS9(PF5u)-3/4-Dx1/2xn) | 1" (FS9(PF5u)-1-Dx1/2xn) | ||||||
|
Flow-through Multi-port Tee |
|||||||
| 3/4" x 3/4" (FS9(PF5u)-3/4-3/4 x1/2xn) | 1" x 3/4" (FS9(PF5u)-1-3/4 x1/2xn) | 1" x 1" (FS9(PF5u)-1-1 x1/2xn) | |||||
|
Flow-through Opposing Multi-port Tee |
|||||||
| 3/4" x 3/4" (FS9(PF5u)-3/4-3/4x1/2xn) | 1" x 1" (FS9(PF5u)-1-1x1/2xn) | ||||||
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[2] n - Number of ports.
n - 4 - 8 for Branch Tees and n - 3 - 8 for Flow-through Tees.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
|||||||
Manifolds+++ [2] [G] |
PPSU |
XPAND |
CSA B137.5 |
||||
|
Branch Multi-port Tee |
|||||||
| 3/4" (FS9(PF5u)-3/4-Dx1/2xn) | 1" (FS9(PF6u)-1-Dx1/2xn) | ||||||
|
Branch Opposing Multi-port Tee |
|||||||
| 3/4" (FS9(PF5u)-3/4-Dx1/2xn) | 1" (FS9(PF5u)-1-Dx1/2xn) | ||||||
|
Flow-through Multi-port Tee |
|||||||
| 3/4" x 3/4" (FS9(PF5u)-3/4-3/4 x1/2xn) | 1" x 3/4" (FS9(PF5u)-1-3/4 x1/2xn) | 1" x 1" (FS9(PF5u)-1-1 x1/2xn) | |||||
|
Flow-through Opposing Multi-port Tee |
|||||||
| 3/4" x 3/4" (FS9(PF5u)-3/4-3/4x1/2xn) | 1" x 1" (FS9(PF5u)-1-1x1/2xn) | ||||||
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[2] n - Number of ports.
n - 4 - 8 for Branch Tees and n - 3 - 8 for Flow-through Tees.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
|||||||
Manifolds+++ [2] [G] |
PPSU |
XPAND |
ASTM F1960 |
||||
|
Branch Multi-port Tee |
|||||||
| 3/4" (FS9(PF6u)-3/4-Dx1/2xn) | 1" (FS9(PF6u)-1-Dx1/2xn) | ||||||
|
Branch Opposing Multi-port Tee |
|||||||
| 3/4" (FS9(PF6u)-3/4-Dx1/2xn) | 1" (FS9(PF6u)-1-Dx1/2xn) | ||||||
|
Flow-through Multi-port Tee |
|||||||
| 3/4" x 3/4" (FS9(PF6u)-3/4-3/4 x1/2xn) | 1" x 3/4" (FS9(PF6u)-1-3/4 x1/2xn) | 1" x 1" (FS9(PF6u)-1-1 x1/2xn) | |||||
|
Flow-through Opposing Multi-port Tee |
|||||||
| 3/4" x 3/4" (FS9(PF6u)-3/4-3/4x1/2xn) | 1" x 1" (FS9(PF6u)-1-1x1/2xn) | ||||||
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[2] n - Number of ports.
n - 4 - 8 for Branch Tees and n - 3 - 8 for Flow-through Tees.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
|||||||
Manifolds+++ [2] [G] |
PPSU |
XPAND |
CSA B137.5 |
||||
|
Branch Multi-port Tee |
|||||||
| 3/4" (FS9(PF6u)-3/4-Dx1/2xn) | 1" (FS9(PF6u)-1-Dx1/2xn) | ||||||
|
Branch Opposing Multi-port Tee |
|||||||
| 3/4" (FS9(PF6u)-3/4-Dx1/2xn) | 1" (FS9(PF6u)-1-Dx1/2xn) | ||||||
|
Flow-through Multi-port Tee |
|||||||
| 3/4" x 3/4" (FS9(PF6u)-3/4-3/4 x1/2xn) | 1" x 3/4" (FS9(PF6u)-1-3/4 x1/2xn) | 1" x 1" (FS9(PF6u)-1-1 x1/2xn) | |||||
|
Flow-through Opposing Multi-port Tee |
|||||||
| 3/4" x 3/4" (FS9(PF6u)-3/4-3/4x1/2xn) | 1" x 1" (FS9(PF6u)-1-1x1/2xn) | ||||||
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[2] n - Number of ports.
n - 4 - 8 for Branch Tees and n - 3 - 8 for Flow-through Tees.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
|||||||
Tubing$ * ^ ¢ § +++ [3] [G] |
PEX |
XPAND |
CSA B137.5 |
||||
| >= 1/8" SDR 9 | |||||||
$ Certified for natural, without oxygen barrier.
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer and shall be
marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM
F1960, ASTM F2098.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
|||||||
Tubing! * ^ § +++ |
PEX 5006 |
XPAND |
CSA B137.5 |
||||
| 1/8" - 6" SDR 9 | |||||||
! Certified for natural, red, white and blue without oxygen barrier.
Natural - 5006
Red, white, blue - 5006, 5106, 5206
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
|||||||
Tubing& * ^ ¢ +++ [4] [G] |
PEX 5006 |
XPAND PEXa |
CSA B137.5 |
||||
| 1/8" - 3" | |||||||
& Meets the chlorine resistance requirements of ASTM F1281 when tested in accordance with
ASTM F2023.
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[4] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer and shall be
marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM
F1960, ASTM F2098.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
|||||||
Tubing* ^ ¢ +++ [8] [G] |
PEX 5106 |
XPAND |
ASTM F876/F877 |
||||
| >= 1/8" | |||||||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[8] Certified for red and white PEX 5106 monowall pipe.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
|||||||
Tubing& * ^ ~ ¢ +++ [8] [G] |
PEX 5106 |
XPAND |
CSA B137.5 |
||||
| >= 1/8" | |||||||
& Meets the chlorine resistance requirements of ASTM F1281 when tested in accordance with
ASTM F2023.
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for
red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[8] Certified for red and white PEX 5106 monowall pipe.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
|||||||
Tubing! * ^ § +++ |
PEX 5106 |
XPAND |
ASTM F876/F877 |
||||
| 1/8" - 6" SDR 9 | |||||||
! Certified for natural, red, white and blue without oxygen barrier.
Natural - 5006
Red, white, blue - 5006, 5106, 5206
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
|||||||
Tubing! * ^ § +++ [G] |
PEX 5106 |
XPAND |
CSA B137.5 |
||||
| 1/8" - 6" SDR 9 | |||||||
! Certified for natural, red, white and blue without oxygen barrier.
Natural - 5006
Red, white, blue - 5006, 5106, 5206
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
|||||||
Tubing* ^ ~ ¢ +++ [6] [G] |
PEX 5106 |
XPAND |
CSA B137.5 |
||||
| 3/8" - 1" | |||||||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for
red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[6] Certified for the following:
2-layer skinned (Natural PEX – White PE) pipe [PEX 5106]: 3/8", 1/2", 5/8", 3/4" & 1"
2-layer skinned (Natural PEX – Red, White or Blue PE) pipe [PEX 5306]: 3/8", 1/2", 5/8",
3/4" & 1"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
|||||||
Tubing* ^ ¢ +++ [6] [G] |
PEX 5106 |
XPAND PEXa |
ASTM F876/F877 |
||||
| 3/8" - 1" | |||||||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[6] Certified for the following:
2-layer skinned (Natural PEX – White PE) pipe [PEX 5106]: 3/8", 1/2", 5/8", 3/4" & 1"
2-layer skinned (Natural PEX – Red, White or Blue PE) pipe [PEX 5306]: 3/8", 1/2", 5/8",
3/4" & 1"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
|||||||
Tubing* ^ ~ ¢ +++ [5] [G] |
PEX 5106 |
XPAND PEXa |
ASTM F876/F877 |
||||
| 1/8" - 3" | |||||||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for
red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[5] Certified for the following:
1. Monowall pipe [PEX 5106]: 1/8" - 3"
2. 2-layer skinned pipe for Red, Blue, White [PEX 5106]: 1/2", 5/8", 3/8", 3/4", 1", 1
1/4", 1 1/2", 2" sizes only.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
|||||||
Tubing* ^ ¢ +++ [4] [5] [G] |
PEX 5106 |
XPAND PEXa |
CSA B137.5 |
||||
| 1/8" - 3" | |||||||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[4] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer and shall be
marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM
F1960, ASTM F2098.
[5] Certified for the following:
1. Monowall pipe [PEX 5106]: 1/8" - 3"
2. 2-layer skinned pipe for Red, Blue, White [PEX 5106]: 1/2", 5/8", 3/8", 3/4", 1", 1
1/4", 1 1/2", 2" sizes only.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
|||||||
Tubing! * ^ § +++ [G] |
PEX 5206 |
XPAND |
ASTM F876/F877 |
||||
| 1/8" - 6" SDR 9 | |||||||
! Certified for natural, red, white and blue without oxygen barrier.
Natural - 5006
Red, white, blue - 5006, 5106, 5206
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
|||||||
Tubing! * ^ § +++ [G] |
PEX 5206 |
XPAND |
CSA B137.5 |
||||
| 1/8" - 6" SDR 9 | |||||||
! Certified for natural, red, white and blue without oxygen barrier.
Natural - 5006
Red, white, blue - 5006, 5106, 5206
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
|||||||
Tubing* ^ ~ ¢ +++ [G] [10] |
PEX 5306 |
XPAND PEXa |
ASTM F876/F877 |
||||
| 1/2", 5/8", 3/8",3/4", 1", 1 1/4", 1 1/2", 2" | |||||||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for
red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
[10] PEX 5306 Certified for Red, Blue, White 2-layer for 1/2", 5/8", 3/8", 3/4", 1", 1 1/4",
1 1/2", 2" sizes only.
|
|||||||
Tubing* ^ ~ ¢ +++ [9] [G] |
PEX 5206 |
XPAND PEXa |
ASTM F876/F877 |
||||
| 1/2", 5/8", 3/8",3/4", 1", 1 1/4", 1 1/2", 2" | |||||||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for
red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[9] PEX 5206 Certified for Red, Blue, White 2-layer for 1/2", 5/8", 3/8", 3/4", 1", 1 1/4",
1 1/2", 2" sizes only.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
|||||||
Tubing* ^ ¢ +++ [4] [9] [G] |
PEX 5206 |
XPAND PEXa |
CSA B137.5 |
||||
| 1/2", 5/8", 3/8",3/4", 1", 1 1/4", 1 1/2", 2" | |||||||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[4] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer and shall be
marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM
F1960, ASTM F2098.
[9] PEX 5206 Certified for Red, Blue, White 2-layer for 1/2", 5/8", 3/8", 3/4", 1", 1 1/4",
1 1/2", 2" sizes only.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
|||||||
Tubing* ^ ¢ +++ [4] [G] [10] |
PEX 5306 |
XPAND PEXa |
CSA B137.5 |
||||
| 1/2", 5/8", 3/8",3/4", 1", 1 1/4", 1 1/2", 2" | |||||||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[4] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer and shall be
marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM
F1960, ASTM F2098.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
[10] PEX 5306 Certified for Red, Blue, White 2-layer for 1/2", 5/8", 3/8", 3/4", 1", 1 1/4",
1 1/2", 2" sizes only.
|
|||||||
Tubing* ^ ¢ +++ [6] [G] |
PEX 5306 |
XPAND |
ASTM F876/F877 |
||||
| 3/8" - 1" | |||||||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[6] Certified for the following:
2-layer skinned (Natural PEX – White PE) pipe [PEX 5106]: 3/8", 1/2", 5/8", 3/4" & 1"
2-layer skinned (Natural PEX – Red, White or Blue PE) pipe [PEX 5306]: 3/8", 1/2", 5/8",
3/4" & 1"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
|||||||
Tubing& * ^ ¢ +++ [6] [7] [G] |
PEX 5306 |
XPAND |
CSA B137.5 |
||||
| 3/8" - 1" | |||||||
& Meets the chlorine resistance requirements of ASTM F1281 when tested in accordance with
ASTM F2023.
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[6] Certified for the following:
2-layer skinned (Natural PEX – White PE) pipe [PEX 5106]: 3/8", 1/2", 5/8", 3/4" & 1"
2-layer skinned (Natural PEX – Red, White or Blue PE) pipe [PEX 5306]: 3/8", 1/2", 5/8",
3/4" & 1"
[7] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer and shall be
marked with the following fitting system designations: ASTM F1807, ASTM F2159.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
|||||||
Radiant Floor Heating
| Product Type | Material Type | Trade Name | Product Standard | |||
Crimp Fittings (PF5)* § |
DZR Brass |
XPAND |
ASTM F877 |
|||
| 3/8" - 2 1/2" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Crimp Fittings (PF5)* ¢ |
DZR Brass |
XPAND |
CSA B137.5 |
|||
| 3/8" - 2 1/2" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
||||||
Crimp Fittings (PF5-G)* § |
MLTPL |
XPAND |
ASTM F877 |
|||
| 3/8" - 2 1/2" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Crimp Fittings (PF5-G)* § |
MLTPL |
XPAND |
ASTM F1807 |
|||
| 3/8" - 2" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Crimp Fittings (PF5-G)* § |
MLTPL |
XPAND |
ASTM F1807 |
|||
| 3/8" - 2 1/2" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Crimp Fittings (PF5-G)* ¢ § |
MLTPL |
XPAND |
CSA B137.5 |
|||
| 3/8" - 2 1/2" | ||||||
* Accepted by NSF for use in residential and commercial construction, including manufactured housing. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Fittings§ [1] [2] |
MLTPL |
XPAND |
ASTM F877 |
|||
|
Stainless Steel Manifolds |
||||||
| FN16-1F-3/4*n | ||||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[1] Main inlet/outlet size: 1"
Sub inlet/outlet size: 3/4"
[2] n is the quantity of subway
|
||||||
Fittings§ [1] [2] |
MLTPL |
XPAND |
ASTM F1807 |
|||
|
Brass Manifolds |
||||||
| FN9-1F-3/4*n | ||||||
|
Nickel - plated brass Manifolds |
||||||
| FN9-1F-3/4*n (Ni) | ||||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[1] Main inlet/outlet size: 1"
Sub inlet/outlet size: 3/4"
[2] n is the quantity of subway
|
||||||
Fittings¢ § [1] [2] |
MLTPL |
XPAND |
CSA B137.5 |
|||
|
Brass Manifolds |
||||||
| FN9-1F-3/4*n | ||||||
|
Nickel - plated brass Manifolds |
||||||
| FN9-1F-3/4*n (Ni) | ||||||
|
Stainless Steel Manifolds |
||||||
| FN16-1F-3/4*n | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[1] Main inlet/outlet size: 1"
Sub inlet/outlet size: 3/4"
[2] n is the quantity of subway
|
||||||
Fittings[5] |
PEX |
XPAND |
ASTM F1960 |
|||
|
RIFENG PEX Ring with Stop |
||||||
| 3/8" - 2" | ||||||
[5] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5. This is a non-wetted product. |
||||||
Fittings[5] |
PEX |
XPAND |
CSA B137.5 |
|||
|
RIFENG PEX Ring with Stop |
||||||
| 3/8" - 2" | ||||||
[5] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5. This is a non-wetted product. |
||||||
Tubing$ * ¢ § [3] |
PEX |
XPAND |
CSA B137.5 |
|||
| >= 1/8" SDR 9 | ||||||
$ Certified for natural, orange, red, and white with oxygen barrier.
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer and shall be
marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM
F1960, ASTM F2080, ASTM F2098.
|
||||||
Tubing$ * § |
PEX 5006 |
XPAND |
ASTM F876/F877 |
|||
| >= 1/8" SDR 9 | ||||||
$ Certified for natural, orange, red, and white with oxygen barrier. * Accepted by NSF for use in residential and commercial construction, including manufactured housing. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing^ ~ ¢ +++ [G] |
PEX 5006 |
XPAND PEXa |
ASTM F876/F877 |
|||
| 1/8" - 3" | ||||||
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for
red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red,
white, blue, orange, natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Tubing* ^ ¢ +++ [3] [G] |
PEX 5006 |
XPAND PEXa |
CSA B137.5 |
|||
| 1/8" - 3" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer and shall be
marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM
F1960, ASTM F2080, ASTM F2098.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Tubing* ^ ¢ +++ [8] [G] |
PEX 5106 |
XPAND |
ASTM F876/F877 |
|||
| >= 1/8" | ||||||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[8] Certified for red and white PEX 5106 monowall pipe.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Tubing! * ^ § |
PEX 5106 |
XPAND |
ASTM F876/F877 |
|||
| 1/8" - 6" SDR 9 | ||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing* ^ ¢ +++ [6] [G] |
PEX 5106 |
XPAND |
ASTM F876/F877 |
|||
| 3/8" - 1" | ||||||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[6] Certified for the following:
2-layer skinned (Natural PEX – White PE) pipe [PEX 5106]: 3/8", 1/2", 5/8", 3/4" & 1"
2-layer skinned (Natural PEX – Red, White or Blue PE) pipe [PEX 5306]: 3/8", 1/2", 5/8",
3/4" & 1"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Tubing* ^ ¢ +++ [6] [G] |
PEX 5106 |
XPAND |
CSA B137.5 |
|||
| 3/8" - 1" | ||||||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[6] Certified for the following:
2-layer skinned (Natural PEX – White PE) pipe [PEX 5106]: 3/8", 1/2", 5/8", 3/4" & 1"
2-layer skinned (Natural PEX – Red, White or Blue PE) pipe [PEX 5306]: 3/8", 1/2", 5/8",
3/4" & 1"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Tubing& * ^ ~ ¢ +++ [8] [9] [G] |
PEX 5106 |
XPAND |
CSA B137.5 |
|||
| 3/8" - 1" | ||||||
& Meets the chlorine resistance requirements of ASTM F1281 when tested in accordance with
ASTM F2023.
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for
red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. Certified for red,
white, blue, orange, natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[8] Certified for red and white PEX 5106 monowall pipe.
[9] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer and shall be
marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM
F1960, ASTM F2080, ASTM F2098, ASSE 1061
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Tubing! * ^ § |
PEX 5106 |
XPAND |
AWWA C904 |
|||
| 1/2" - 1 1/2" SDR 9 | ||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing! * ^ § |
PEX 5106 |
XPAND |
CSA B137.5 |
|||
| 1/8" - 6" SDR 9 | ||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing* ^ ¢ +++ [4] [G] |
PEX 5106 |
XPAND PEXa |
ASTM F876/F877 |
|||
| 1/8" - 3" | ||||||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[4] Certified for the following:
1. Monowall pipe [PEX 5006/PEX 5106]: 1/8"- 3"
2. 2-layer skinned pipe for Red, Blue, White [PEX 5006/PEX 5106]: 1/2", 5/8", 3/8",
3/4", 1", 1 1/4", 1 1/2", 2" sizes only
3. 3-Layer barrier pipe [PEX 5006/PEX 5106]: 1/2", 5/8", 3/8", 3/4", 1", 1 1/4", 1 1/2",
2" sizes only
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Tubing* ^ ¢ +++ [4] [G] [12] |
PEX 5106 |
XPAND PEXa |
CSA B137.5 |
|||
| 1/8" - 3" | ||||||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[4] Certified for the following:
1. Monowall pipe [PEX 5006/PEX 5106]: 1/8"- 3"
2. 2-layer skinned pipe for Red, Blue, White [PEX 5006/PEX 5106]: 1/2", 5/8", 3/8",
3/4", 1", 1 1/4", 1 1/2", 2" sizes only
3. 3-Layer barrier pipe [PEX 5006/PEX 5106]: 1/2", 5/8", 3/8", 3/4", 1", 1 1/4", 1 1/2",
2" sizes only
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
[12] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer and shall be
marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM
F1960, ASTM F2098.
|
||||||
Tubing* ^ ¢ [13] |
PEX 5106 |
XPAND PEXa |
ASTM F876/F877 |
|||
| 1/2", 5/8", 3/8", 3/4", 1", 1 1/4", 1 1/2", 2" | ||||||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[13] PEX 5106 Certified for Red, Blue, White 3- Layer Barrier tubing for 1/2", 5/8", 3/8",
3/4", 1", 1 1/4", 1 1/2", 2" sizes only.
|
||||||
Tubing* ^ ¢ [13] |
PEX 5106 |
XPAND PEXa |
CSA B137.5 |
|||
| 1/2", 5/8", 3/8", 3/4", 1", 1 1/4", 1 1/2", 2" | ||||||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[13] PEX 5106 Certified for Red, Blue, White 3- Layer Barrier tubing for 1/2", 5/8", 3/8",
3/4", 1", 1 1/4", 1 1/2", 2" sizes only.
|
||||||
Tubing! * ^ § |
PEX 5206 |
XPAND |
ASTM F876/F877 |
|||
| 1/8" - 6" SDR 9 | ||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing! * ^ § |
PEX 5206 |
XPAND |
AWWA C904 |
|||
| 1/2" - 1 1/2" SDR 9 | ||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing! * ^ § |
PEX 5206 |
XPAND |
CSA B137.5 |
|||
| 1/8" - 6" SDR 9 | ||||||
! Certified for natural, red, white and blue without oxygen barrier. Natural - 5006 Red, white, blue - 5006, 5106, 5206 * Accepted by NSF for use in residential and commercial construction, including manufactured housing. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM F2023. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Tubing* ^ ¢ +++ [G] [10] |
PEX 5206 |
XPAND PEXa |
ASTM F876/F877 |
|||
| 1/2", 5/8", 3/8", 3/4", 1", 1 1/4", 1 1/2", 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
[10] PEX 5206 Certified for Red, Blue, White 2-layer for 1/2", 5/8", 3/8", 3/4", 1", 1 1/4",
1 1/2", 2" sizes only.
|
||||||
Tubing* ^ ¢ +++ [G] [10] [12] |
PEX 5206 |
XPAND PEXa |
CSA B137.5 |
|||
| 1/2", 5/8", 3/8", 3/4", 1", 1 1/4", 1 1/2", 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
[10] PEX 5206 Certified for Red, Blue, White 2-layer for 1/2", 5/8", 3/8", 3/4", 1", 1 1/4",
1 1/2", 2" sizes only.
[12] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer and shall be
marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM
F1960, ASTM F2098.
|
||||||
Tubing* ^ ¢ +++ [6] [G] |
PEX 5306 |
XPAND |
ASTM F876/F877 |
|||
| 3/8" - 1" | ||||||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[6] Certified for the following:
2-layer skinned (Natural PEX – White PE) pipe [PEX 5106]: 3/8", 1/2", 5/8", 3/4" & 1"
2-layer skinned (Natural PEX – Red, White or Blue PE) pipe [PEX 5306]: 3/8", 1/2", 5/8",
3/4" & 1"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Tubing& * ^ ¢ +++ [6] [7] [G] |
PEX 5306 |
XPAND |
CSA B137.5 |
|||
| 3/8" - 1" | ||||||
& Meets the chlorine resistance requirements of ASTM F1281 when tested in accordance with
ASTM F2023.
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[6] Certified for the following:
2-layer skinned (Natural PEX – White PE) pipe [PEX 5106]: 3/8", 1/2", 5/8", 3/4" & 1"
2-layer skinned (Natural PEX – Red, White or Blue PE) pipe [PEX 5306]: 3/8", 1/2", 5/8",
3/4" & 1"
[7] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer and shall be
marked with the following fitting system designations: ASTM F1807, ASTM F2159.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
Tubing* ^ ¢ +++ [G] [11] |
PEX 5306 |
XPAND PEXa |
ASTM F876/F877 |
|||
| 1/2", 5/8", 3/8", 3/4", 1", 1 1/4", 1 1/2", 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
[11] PEX 5306 Certified for Red, Blue, White 2-layer for 1/2", 5/8", 3/8", 3/4", 1", 1 1/4",
1 1/2", 2" sizes only.
|
||||||
Tubing* ^ ¢ +++ [G] [11] [12] |
PEX 5306 |
XPAND PEXa |
CSA B137.5 |
|||
| 1/2", 5/8", 3/8", 3/4", 1", 1 1/4", 1 1/2", 2" SDR 9 | ||||||
* Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
[11] PEX 5306 Certified for Red, Blue, White 2-layer for 1/2", 5/8", 3/8", 3/4", 1", 1 1/4",
1 1/2", 2" sizes only.
[12] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
fitting system(s) for which the tubing is recommended by the manufacturer and shall be
marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM
F1960, ASTM F2098.
|
||||||
Number of matching Manufacturers is 1
Number of matching Products is 914
Processing time was 0 seconds
