NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, January 15, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?Company=C0877806&Standard=014&

Did you know?

The new NSF Product Listings website is available for NSF/ANSI 14-Certified products with a new look and feel. Click on "Try it Now" to check it out!
NSF/ANSI 14
Plastics Piping System Components and Related Materials

Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document


 
Viterra Systems LLC 
1830 Flower Ave.
Duarte, CA 91010 
United States 
626-716-2238

Facility : Jawa Tengah, Indonesia

Drain, Waste, and Vent - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

DWV Pipe[1]		  
PVC		  
Viterra		  
ASTM D2665
1 1/4" - 24" Sch 40 

[1] Certification includes the following:
    1 1/4" - 24" Sch 40 DWV pipe, ASTM D2665
    VP011-012 1-1/4"
    VP001-080 8"
    VP011-080 8"        
    VP001-100 10"
    VP011-100 10"       
    VP001-120 12"
    VP011-120 12"       
    VP001-140 14"
    VP011-140 14"       
    VP001-160 16"
    VP011-160 16"       
    VP001-180 18"
    VP011-180 18"       
    VP001-200 20"
    VP011-200 20"       
    VP001-240 24"
    VP011-240 24"

Fittings¢ § [2] [3] [G]		  
PVC		  
Viterra		  
ASTM D2665

1/4 Bend w/ Low Heel Inlet (H x H x H)
1 1/2" - 12" (LP303-xxx)  

22.5° Elbow (H x H)
2" (LP324-020)   3" (LP324-030)   4"(LP324-040)  

22.5° Street Elbow (H x S)
2" (LP326-020)   3" (LP326-030)  

45° Elbow (H x H)
1 1/2" (LP321-015)   2" (LP321-020)   3" (LP321-030)   4" (LP321-040)  
6" (LP321-060)  

45° Ell (SOC x SOC)
1/4" - 6" (417-xxx)  

45° Street Elbow (H x S)
1 1/2" (LP323-015)   2" (LP323-020)   3" (LP323-030)   4" (LP323-040)  

90° Double Elbow (H x H x H)
3" (LP327-030)  

90° Elbow (H x H)
1 1/4" (LP300-012)   1 1/2" (LP300-015)   2" (LP300-020)   2" (LP302-020)  
3" (LP300-030)   3" (LP302-030)   4" (LP300-040)   4" (LP302-040)  
6" (LP300-060)  

90° Reducing Ell (SOC x FIPT)
1/4" - 6" (407-xxx)  

90° Street Ell (SPIG x SOC)
1/4" - 6" (409-xxx)  

Cleanout Plug (MPT)
1 1/2" - 12" (LP106-xxx)  

Cleanout Tee w/ C.O. Plug (H x H)
1 1/2" - 12" (LP444X-xxx)  

Closet Flange (H)
4" x 3" (LP800-422)  

Combo Wye and 1/8 Bend, Reducing (One Pc)(All HUB)
1 1/4" - 12" (LP502-xxx)  

Coupling (H x H)
1 1/2" - 12" (LP100-xxx)   2" (LP100-020)   3" (LP100-030)   4" (LP100-040)  

Female Adapter (FPT x H)
1 1/2" - 12" (LP101-xxx)  

Flush Bushing (S x H)
1 1/2" - 12" (LP107-xxx)   3" x 2" (LP107-338)  

Flush C.O. Tee (H x H x FPT)
1 1/2" - 12" (LP445-xxx)  

Long Sweep 1/4 Bend, Street (H x S)
1 1/2" - 12" (LP309-xxx)  

Long Sweep 90° Elbow (H x H)
1 1/2" (LP304-015)   2" (LP304-020   3" (LP304-030)   4" (LP304-040)  

Low Profile P-TRAP (H x H)
2" (LP710-020)  

One Piece Combination Wye (H x H x H)
2" (LP501-020)   3" (LP501-030)   4" (LP501-040)  

One Piece Reducing Combination Wye (H x H x H)
3" x 3" x 2" (LP502-338)   4" x 4" x 3" (LP502-422)  

P-Trap (H x H)
2" (LP706X-020)  

Reducer (H x H)
3"x 2" (LP102-338)  

Reducing Closet Bend (H x H)
3" x 4" (LP329-342)  

Reducing Double Wye (ALL HUB)
(LP612-xxx)  

Reducing Sanitary Tee (H x H x H)
2" x 1 1/2" x 1 1/2" (LP401-241)   2" x 2" x 1 1/2" (LP401-251)   3" x 3" x 1 1/2" (LP401-337)   3" x 3" x 2" (LP401-338)  

Reducing Tee (SOC x SOC x FIPT)
1/4" - 6" (402-xxx)  

Reducing Wye (H x H x H)
3" x 3" x 2" (LP601-338)   4" x 4" x 2" (LP601-420)   4" x 4" x 3" (LP601-422)   6" x 6" x 4" (LP601-532)  

Return Bend (H x H)
1 1/2" - 12" (LP700-xxx)  

Sanitary Tee (H x H x H)
1 1/2" (LP400-015)   2" (LP400-020)   3" (LP400-030)   4" (LP400-040)  

Tee (SOC x SOC x SOC)
1/4" - 6" (401-xxx)  

Trap Elbow (for use with Traps only) (H x S)
1 1/4" - 12" (LP335-xxx)  

Vent Ell, Street (H x S)
1 1/4" - 12" (LP333-xxx)  

Wye (H x H x H)
2" (LP600-020)   3" (LP600-030)   4" (LP600-040)   6" (LP600-060)   

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[2] XXX - Size
          012 - 1 1/4"
          015 - 1 1/2"
          020 - 2"
          030 - 3"
          040 - 4"
          060 - 6"
          080 - 8"
          100 - 10"
          120 - 12"
          169 - 1 1/4" x 1 1/2"
          212 - 1 1/2" x 1 1/4"
          213 - 1 1/2" x 2"
          241 - 2" × 1 1/2" × 1 1/2" or 2" × 1 1/2" × 1 1/2" × 1 1/2"
          251 - 2" × 1 1/2" or 2" × 2" × 1 1/2" × 1 1/2"
          253 - 2" x 3"
          337 - 3" × 1 1/2" or 3" × 3" × 1 1/2" or 3" × 3" × 3" × 1 1/2"
          338 - 3" × 2" or 3" × 3" × 2" or 3" × 3" × 3" × 2"
          342 - 3" x 4"
          415 - 4" × 4" × 1/2"
          420 - 4" × 2" or 4" × 4" × 2" or 4" × 4" × 4" × 2"
          422 - 4" × 3" or 4" × 4" × 3" or 4" × 4" × 4" × 3"
          532 - 6" × 4" or 6" × 6" × 4" or 6" × 6" × 6" × 4"
          582 - 8" × 4" or 8" × 8" × 4" or 8" × 8" × 8" × 4"
          585 - 8" × 6" or 8" × 8" × 6" or 8" × 8" × 8" × 6"
          626 - 10" × 6" or 10" × 10" × 6" or 10" × 10" × 10" × 6"
          628 - 10" × 8" or 10" × 10" × 8" or 10" × 10" × 10" × 8"
          670 - 12" × 10" or 12" × 12" × 10" or 12" × 12" × 12" × 10"
[3] Figure numbers may have the following prefix used to identify retail packaging
    requirements: R
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Fittings¢ § [2] [3] [G]		  
PVC		  
Viterra		  
CSA B181.2

22.5° Elbow (H x H)
2" (LP324-020)   3" (LP324-030)   4"(LP324-040)  

22.5° Street Elbow (H x S)
2" (LP326-020)   3" (LP326-030)  

45° Elbow (H x H)
1 1/2" (LP321-015)   2" (LP321-020)   3" (LP321-030)   4" (LP321-040)  
6" (LP321-060)  

45° Street Elbow (H x S)
1 1/2" (LP323-015)   2" (LP323-020)   3" (LP323-030)   4" (LP323-040)  

90° Double Elbow (H x H x H)
3" (LP327-030)  

90° Elbow (H x H)
1 1/4" (LP300-012)   1 1/2" (LP300-015)   2" (LP300-020)   2" (LP302-020)  
3" (LP300-030)   3" (LP302-030)   4" (LP300-040)   4" (LP302-040)  
6" (LP300-060)  

Closet Flange (H)
4" x 3" (LP800-422)  

Coupling (H x H)
2" (LP100-020)   3" (LP100-030)   4" (LP100-040)  

Flush Bushing (S x H)
3" x 2" (LP107-338)  

Long Sweep 90° Elbow (H x H)
1 1/2" (LP304-015)   2" (LP304-020   3" (LP304-030)   4" (LP304-040)  

Low Profile P-TRAP (H x H)
2" (LP710-020)  

One Piece Combination Wye (H x H x H)
2" (LP501-020)   3" (LP501-030)   4" (LP501-040)  

One Piece Reducing Combination Wye (H x H x H)
3" x 3" x 2" (LP502-338)   4" x 4" x 3" (LP502-422)  

P-Trap (H x H)
2" (LP706X-020)  

Reducer (H x H)
3"x 2" (LP102-338)  

Reducing Closet Bend (H x H)
3" x 4" (LP329-342)  

Reducing Sanitary Tee (H x H x H)
2" x 1 1/2" x 1 1/2" (LP401-241)   2" x 2" x 1 1/2" (LP401-251)   3" x 3" x 1 1/2" (LP401-337)   3" x 3" x 2" (LP401-338)  

Reducing Wye (H x H x H)
3" x 3" x 2" (LP601-338)   4" x 4" x 2" (LP601-420)   4" x 4" x 3" (LP601-422)   6" x 6" x 4" (LP601-532)  

Sanitary Tee (H x H x H)
1 1/2" (LP400-015)   2" (LP400-020)   3" (LP400-030)   4" (LP400-040)  

Wye (H x H x H)
2" (LP600-020)   3" (LP600-030)   4" (LP600-040)   6" (LP600-060)   

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[2] XXX - Size
          012 - 1 1/4"
          015 - 1 1/2"
          020 - 2"
          030 - 3"
          040 - 4"
          060 - 6"
          080 - 8"
          100 - 10"
          120 - 12"
          169 - 1 1/4" x 1 1/2"
          212 - 1 1/2" x 1 1/4"
          213 - 1 1/2" x 2"
          241 - 2" × 1 1/2" × 1 1/2" or 2" × 1 1/2" × 1 1/2" × 1 1/2"
          251 - 2" × 1 1/2" or 2" × 2" × 1 1/2" × 1 1/2"
          253 - 2" x 3"
          337 - 3" × 1 1/2" or 3" × 3" × 1 1/2" or 3" × 3" × 3" × 1 1/2"
          338 - 3" × 2" or 3" × 3" × 2" or 3" × 3" × 3" × 2"
          342 - 3" x 4"
          415 - 4" × 4" × 1/2"
          420 - 4" × 2" or 4" × 4" × 2" or 4" × 4" × 4" × 2"
          422 - 4" × 3" or 4" × 4" × 3" or 4" × 4" × 4" × 3"
          532 - 6" × 4" or 6" × 6" × 4" or 6" × 6" × 6" × 4"
          582 - 8" × 4" or 8" × 8" × 4" or 8" × 8" × 8" × 4"
          585 - 8" × 6" or 8" × 8" × 6" or 8" × 8" × 8" × 6"
          626 - 10" × 6" or 10" × 10" × 6" or 10" × 10" × 10" × 6"
          628 - 10" × 8" or 10" × 10" × 8" or 10" × 10" × 10" × 8"
          670 - 12" × 10" or 12" × 12" × 10" or 12" × 12" × 12" × 10"
[3] Figure numbers may have the following prefix used to identify retail packaging
    requirements: R
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Fittings¢ § [2] [3] [G]		  
ABS		  
Viterra		  
ASTM D2661

22½° ELBOW (HUB×HUB)
LN324-015 1-1/2"   LN324-020 2"   LN324-030 3"   LN324-040 4"  
LN324-060 6"  

22½° STREET ELBOW (HUB×SPG)
LN326-015 1-1/2"   LN326-020 2"   LN326-030 3"   LN326-040 4"  

45° DOUBLE WYE (ALL HUB)
LN611-015 1-1/2"   LN611-020 2"   LN611-030L 3"   LN611-030 3"  
LN611-040 4"  

45° ELBOW (HUB×HUB)
LN321-012 1-1/4"   LN321-015 1-1/2"   LN321-020L 2"   LN321-030L 3"  
LN321-040 4"   LN321-060 6"  

45° ELBOW-SHORT TURN (HUB×HUB)
LN321-015S 1-1/2"   LN321-020S 2"   LN321-030S 3"   LN321-040S 4"  

45° REDUCING DOUBLE WYE (ALL HUB)
LN612-251 2 x 2 x 1-1/2 x 1-1/2"   LN612-337 3 x 3 x 1-1/2 x 1-1/2"   LN612-338 3×3×2×2"   LN612-420 4 x 4 x 2 x 2"  
LN612-422 4 x 4 x 3 x 3"   LN612-532 6 x 6 x 4 x 4"  

45° REDUCING STREET WYE(SPG×HUB×HUB)
LN603-251 2 x 2 x 1-1/2"   LN603-337 3 x 3 x 1-1/2"   LN603-338 3 x 3 x 2"   LN603-420 4 x 4 x 2"  
LN603-422 4 x 4 x 3"  

45° REDUCING WYE (HUB×HUB×HUB)
LN601-241 2×1-1/2×1-1/2"   LN601-251L 2×2×1-1/2"   LN601-251 2×1-1/2×1-1/2"   LN601-337L 3×3×1-1/2"  
LN601-337 2×1-1/2×1-1/2"   LN601-338L 3×3×2"   LN601-338 2×1-1/2×1-1/2"   LN601-419 4 x 4 x 1-1/2"  
LN601-420L 4×4×2"   LN601-420 2×1-1/2×1-1/2"   LN601-422L 4×4×3"   LN601-422 2×1-1/2×1-1/2"  
LN601-530 6 x 6 x 3"   LN601-532 6×6×4"  

45° STREET ELBOW (HUB×SPG)
LN323-012 1-1/4"   LN323-015 1-1/2"   LN323-020L 2"   LN323-030L 3"  
LN323-040 4"   LN323-060 6"  

45° STREET ELBOW-SHORT TURN (HUB×SPG)
LN323-015S 1-1/2"   LN323-020S 2"   LN323-030S 3"   LN323-040S 4"  

45° STREET WYE (SPG×HUB×HUB)
LN602-015 1 1/2"   LN602-020 2"   LN602-030 3"   LN602-040 4"  

45° WYE (HUB×HUB×HUB)
LN600-012 1-1/4"   LN600-015L 1-1/2"   LN600-015 1-1/2"   LN600-020L 2"  
LN600-020 2"   LN600-030L 3"   LN600-030 3"   LN600-040L 4"  
LN600-040 4"   LN600-060 6"   LN601-209 1-1/2×1-1/2"×1/2"   LN601-210 1-1/2×1-1/2"×3/4"  

60° ELBOW (HUB×HUB)
LN319-015 1-1/2"   LN319-020 2"   LN319-030 3"   LN319-040 4"  

60° STREET ELBOW (HUB×SPG)
LN320-015 1-1/2"   LN320-020 2"   LN320-030 3"   LN320-040 4"  

90° ELBOW (HUB×HUB)
LN300-012 1-1/4"   LN300-015 1-1/2"   LN300-020 2"   LN300-030 3"  
LN300-040 4"   LN300-060 6"  

90° ELBOW W/ LOW HEEL INLET (HUB×HUB×HUB)
LN303-337 3 x 3 x 1-1/2"   LN303-338 3 x 3 x 2"   LN303-420 4 x 4 x 2"  

90° ELBOW WITH SIDE INLET (HUB×HUB×HUB)
LN300S-337 3 x 3 x 1-1/2"   LN300S-338 3 x 3 x 2"  

90° ELBOW-SHORT TURN (HUB×HUB)
LN300-012S 1-1/4"   LN300-015S 1-1/2"   LN300-020S 2"   LN300-030S 3"  
LN300-040S 4"   LN300-060S 6"  

90° LONG SWEEP ELBOW (HUB×HUB)
LN304-012 1-1/4"   LN304-015 1-1/2"   LN304-020 2"   LN304-030 3"  
LN304-040 4"  

90° LONG SWEEP ELBOW, STREET (HUB×SPG)
LN309-015 1-1/2"   LN309-020 2"   LN309-030 3"   LN309-040 4"  

90° REDUCING CLOSET ELBOW (HUB×HUB)
LN329-422 4×3"  

90° REDUCING CLOSET ST ELBOW W/ TEST CAP (HUB×SPG)
LN330X-342 3 x 4"   LN330X-422 4 x 3"  

90° REDUCING CLOSET STREET ELBOW (HUB×SPG)
LN330-342 3 x 4"   LN330-422 4 x 3"  

90° STREET ELBOW (HUB×SPG)
LN302-012 1-1/4"   LN302-015 1-1/2"   LN302-020 2"   LN302-030 3"  
LN302-040 4"   LN302-060 6"  

90° STREET ELBOW W/ LOW HEEL INLET (HUB×SPG×HUB)
LN310-338 3 x 3 x 2"  

90° STREET ELBOW W/ LOW HEEL INLET (HUB×SPG×HUB)
LN310-338 3 x 3 x 2"  

90° STREET ELBOW-SHORT TURN (HUB×SPG)
LN302-015S 1-1/2"   LN302-020S 2"   LN302-030S 3"   LN302-040S 4"  

90° VENT ELBOW (HUB×HUB)
LN331-012 1-1/4"   LN331-015 1-1/2"   LN331-020 2"   LN331-030 3"  
LN331-040 4"  

ABS-COPPER ADAPTER (HUB×SJ)
LN120-015 1-1/2"   LN120-212 1-1/2×1-1/4"  

CAP (HUB)
LN116-012 1-1/4"   LN116-015 1-1/2"   LN116-020 2"   LN116-030 3"  
LN116-040 4"   LN116-060 6"  

CLEANOUT ADAPTER (SPG×FIPT)
LN105-012 1-1/4"   LN105-015 1-1/2"   LN105-020 2"   LN105-030 3"  
LN105-040 4"   LN105-060 6"  

CLEANOUT ADAPTER W/PLUG (SPG×CLEANOUT W/PLUG)
LN105X-012 1-1/4"   LN105X-015 1-1/2"   LN105X-020 2"   LN105X-030 3"  
LN105X-040 4"   LN105X-060 6"  

CLEANOUT PLUG (MIPT)
LN106-015 1-1/2"   LN106-020 2"   LN106-025 2-1/2"   LN106-030 3"  
LN106-035 3-1/2"   LN106-040 4"  

CLEANOUT WYE (HUB×HUB×FIPT)
LN604-015 1-1/2"  

CLOSET FLANGE W/ADJUSTABLE METAL RING (H)
LN811-040 4"  

CLOSET FLANGE W/ADJUSTABLE METAL RING (S)
LN811-040 4"×4"  

CLOSET FLANGE (FIPT)
LN830-422 4 x 3  

CLOSET FLANGE (HUB)
LN800-040 4×4"   LN800-422L 4×3"   LN800-422 4×3"  

CLOSET FLANGE (MIPT)
LN831-422 4 x 3"  

CLOSET FLANGE W/ KNOCKOUT TEST PLUG (HUB)
LN800T-040 4 x 4"   LN800T-422L 4 x 3"   LN800T-422 4 x 3"  

CLOSET FLANGE W/ PIPE STOP (HUB)
LN815PS-040 4 x 4 / 4 x 3  

CLOSET FLANGE W/ADJUSTABLE PLASTIC RING (HUB)
LN810P-040 4 x 4"  

CLOSET FLANGE W/ADJUSTABLE PLASTIC RING (SPG)
LN812P-040 4 x 4"   LN812P-422 4 x 3"  

CLOSET FLANGE W/KONCKOUT & PIPE STOP (HUB)
LN815K-040 4 x 4 / 4 x 3  

CLOSET FLANGE W/RING-PULL TEST PLUG (HUB)
LN800R-040 4 x 4"   LN800R-422L 4 x 3"   LN800R-422 4 x 3"  

CLOSET FLANGE W/THREADED TEST PLUG (HUB)
LN800T-040C 4"   LN800T-422CL 4 x 3"   LN800T-422C 4 x 3"  

COMBINATION WYE & 1/8 BEND(ONE PIECE)(HUB×HUB×HUB)
LN501-015 1-1/2"   LN501-020 2"   LN501-030 3"   LN501-040 4"  

COMBINATION WYE & 1/8 BEND(TWO PIECE)(HUB×HUB×HUB)
LN503-020 2"  

COUPLING (HUB×HUB)
LN100-012 1-1/4"   LN100-015 1-1/2"   LN100-020 2"   LN100-030 3"  
LN100-040 4"   LN100-060 6"  

DOUBLE 90° ELBOW (HUB×HUB×HUB)
LN327-015 1-1/2"   LN327-020 2"   LN327-030 3"   LN327-040 4"  
LN327-241 2 x 1-1/2 x 1-1/2"  

DOUBLE FIXTURE FITTING (ALL HUB)
LN500-020 2"   LN500-030 3"   LN500-241 2 x 1-1/2 x 1-1/2 x 1-1/2"   LN500-251 2" × 2" × 1-1-2" ×1-1-2"  
LN500-257 2 x 1-1/2 x 2 x 2"   LN500-338 3 x 2 x 3 x 3"  

DOUBLE SANITARY TEE (ALL HUB)
LN428-015 1-1/2"   LN428-020 2"   LN428-030 3"   LN428-040 4"  

DOUBLE SANITARY TEE W / R & L SIDE INLET(ALL HUB)
LN439-338 3 x 3 x 3 x 3 x 2 x 2"  

DOUBLE SANITARY TEE W /SIDE INLET (ALL HUB)
LN438-337 3 x 3 x 3 x 3 x1-1/ 2"   LN438-338 3 x 3 x 3 x 3 x 2"   LN438-420 4 x 4x 4 x 4 x 2"  

DRUM TRAP W / CLEANOUT
LN702X-363 3 x 6 x 1-1/2"  

EXPANSION JOINT (HUB×HUB)
LNH119-015 1-1/2"   LNH119-020 2"   LNH119-030 3"   LNH119-040 4"  

EXPANSION JOINT (HUB×SPG)
LNH119S-030 3"  

FEMALE ADAPTER (HUB×FIPT)
LN101-012 1-1/4"   LN101-015 1-1/2"   LN101-020 2"   LN101-030 3"  
LN101-040 4"   LN101-060 6"  

FLUSH ADAPTER (SPG×FIPT)
LN108-209 1-1/2×1/2"   LN108-210 1-1/2×3/4"   LN108-212 1-1/2 x 1-1/4"   LN108-251 2 x 1-1/2"  
LN108-337 3×1-1/2"   LN108-338 3x 2"   LN108-422 4x 3"  

FLUSH BUSHING (SPG×HUB)
LN107-212 1-1/2×1-1/4"   LN107-251 2×1-1/2"   LN107-337 3×1-1/2"   LN107-338 3×2"  
LN107-419 4×1-1/2   LN107-420 4×2"   LN107-422 4×3"   LN107-532 6×4"  

FLUSH C.O. PLUG (MPT)
LN110-020 2"   LN110-030 3"   LN110-040 4"  

FLUSH CLOSET FLANGE (INSIDE 4", OUTSIDE 3")
LN815-040 4 x 4 / 4 x 3  

HUB ADAPTER CAST IRON (HUB×SJ)
LN123-020 2"   LN123-030 3"   LN123-040 4"  

HUB ADAPTER CAST IRON INCREASER (HUB×SJ)
LN123R-213 1-1/2 x 2"   LN123R-342 3 x 4"  

LA PATTERN P-TRAP W/UNION&PLASTIC NUT(HUB×SJ)
LN711M-015 1-1/2"   LN711M-212 1-1/2 x 1-1/4"  

MALE ADAPTER (HUB×MIPT)
LN109-012 1-1/4"   LN109-015 1-1/2"   LN109-020 2"   LN109-030 3"  
LN109-040 4"   LN109-212 1-1/2×1-1/4"  

MALE ADAPTER (SPG×MIPT)
LN111-012 1-1/4"   LN111-015 36893   LN111-020 2"   LN111-030 3"  
LN111-040 4"   LN111-212 1-1/2×1-1/4"  

NO-HUB ADAPTER (SPG×HUB)
LN119-020 2"   LN119-030 3"   LN119-040 4"   LN119-251 2 x 1-1/2"  
LN119-422 4 x 3"  

P-TRAP (HUB×HUB)
LN706X-015 1-1/2"   LN706X-020 2"   LN706X-030 3"   LN706X-040 4"  

P-TRAP W/PLUG (HUB×HUB×CLEANOUT W/PLUG)
LN707X-015 1-1/2"   LN707X-020 2"  

P-TRAP W/UNION &C/O (HUB×HUB×C/O)
LN712-015 1-1/2"  

P-TRAP W/UNION JOINT (HUB×HUB)
LN708P-012 1-1/4"   LN708P-015 1-1/2"   LN708P-020 2"  

PIPE INCREASER-REDUCER (HUBxHUB)
LN102-212 1-1/2×1-1/4"   LN102-251 2×1-1/2"   LN102-337 3×1-1/2"   LN102-338 3×2"  
LN102-419 4×1-1/2"   LN102-420L 4×2"   LN102-420 4 x 2"   LN102-422L 4×3"  
LN102-422 4×3"  

PLUG WITH GASKET (MIPT)
LN106R-012 1-1/4"   LN106R-015 1-1/2"   LN106R-020 2"   LN106R-025 2-1/2"  
LN106R-030 3"   LN106R-035 2-1/2"   LN106R-040 4"   LN106R-060 6"  

REDUCING CLOSET FLANGE (SPG)
LN801-422 4 x 3"  

REDUCING COMBINATION WYE & 1/8 BEND(HUB×HUB×HUB)
LN502-241 2 x 1-1/2 x 1-1/2"   LN502-251 2 x 2 x 1-1/2"   LN502-257 2 x 1-1/2 x 2"   LN502-337 3 x 3 x 1-1/2"  
LN502-338 3 x 3 x 2"   LN502-420 4 x 4 x 2"   LN502-422 4 x 4 x 3"  

REDUCING DOUBLE SANITARY TEE (ALL HUB)
LN429-251 2×2×1-1/2×1-1/2"   LN429-337 3×3×1-1/2×1-1/2"   LN429-338 3 x 3 x 2 x 2"   LN429-420 4 x 4 x 2 x 2"  
LN429-422 4 x 4 x 3 x 3"   LN429-323 3 x 3 x 2 x 1-1/2"  

REDUCING SANITARY TEE (HUB×HUB×HUB)
LN401-222 1-1/2 x 1-1/4 x 1-1/4"   LN401-212 1-1/2 x 1-1/2 x 1-1/4"   LN401-225 1-1/2 x 1-1/4 x 1-1/2"   LN401-241L 2×1-1/2×1-1/2"  
LN401-241 3×3×2"   LN401-251L 2×2×1-1/2"   LN401-251 3×3×2"   LN401-257L 2×1-1/2×2"  
LN401-257 3×3×2"   LN401-337 3×3×1-1/2"   LN401-338L 3×3×2"   LN401-338 3×3×2"  
LN401-419 4 x 4 x 1-1/2"   LN401-420 4×4×2"   LN401-422 4×4×3"   LN401-532 6 x 6 x 4"  

REDUCING STREET SANITARY TEE (SPG×HUB×HUB)
LN404-241 2×1-1/2×1-1/2"   LN404-251 2×2×1-1/2"   LN404-257 2×1-1/2×2"   LN404-337 3×3×1-1/2"  
LN404-338 3 x 3 x 2"  

REPAIR COUPLING (HUB×HUB)
LN130-015 1-1/2"   LN130-020 2"   LN130-030 3"   LN130-040 4"  

RETURN BEND (HUB×HUB)
LN700-015 1-1/2"   LN700-020 2"   LN700-030 3"   LN700-040 4"  

RETURN BEND (HUB×HUB×CLEANOUT W/PLUG)
LN701-015 1-1/2"   LN701-020 2"  

SANITARY TEE (HUB×HUB×HUB)
LN400-012L 1-1/4"   LN400-012 1-1/4"   LN400-015L 1-1/2"   LN400-015 1-1/2"  
LN400-020L 2"   LN400-020 2"   LN400-030 3"   LN400-040L 4"  
LN400-040 4"   LN400-060 6"  

SANITARY TEE W / LEFT SIDE INLET (ALL HUB)
LN416-337 3 x 3 x 3 x 1-1/2"  

SANITARY TEE W / LEFT SIDE INLET (ALL HUB)
LN417-337 3 x 3 x 3 x 1-1/2"   LN417-338 3 x 3 x 3 x 2"  

SANITARY TEE W / LEFT SIDE INLET (ALL HUB)
LN416-338 3 x 3 x 3 x 2"  

SANITARY TEE W / LEFT SIDE INLET (ALL HUB)
LN417-329 3 x 3 x 2 x 2"  

SANITARY TEE W / LEFT SIDE INLET (ALL HUB)
LN416-329 3 x 3 x 2 x 2"   LN416-420 4 x 4 x 4 x 2"  

SANITARY TEE W / LEFT SIDE INLET (ALL HUB)
LN417-420 4 x 4 x 4 x 2"  

SANITARY TEE W / R& L SIDE INLET (ALL HUB)
LN418-337 3 x 3 x 3 x 1-1/2 x 1-1/2"   LN418-338 3 x 3 x 3 x 2 x 2"   LN418-420 4"×4"×4"×2"×2"  

SEWER & DRAIN ADAPTER (HUBxHUB)
LN117-422 4×3"   LN117-342 3 x 4"  

SLIP PLUG (SPG)
LN110S-015 1-1/2"   LN110S-020 2"   LN110S-025 2-1/2"   LN110S-030 3"  
LN110S-035 3-1/2"   LN110S-040 4"  

STREET SANITARY TEE (SPG×HUB×HUB)
LN403-015 1-1/2"   LN403-020 2"   LN403-030 3"   LN403-040 4"  

TEST TEE (HUBxHUBxFIPT)
LN445-015 1 -1/2"   LN445-015L 1 -1/2"   LN445-020 2"   LN445-020L 2"  
LN445-030 3"   LN445-030L 3"   LN445-040 4"   LN445-040L 4"  
LN445-427 4×3×4"  

TEST TEE (HUB×HUB×CLEANOUT W/PLUG)
LN444X-427 4×3×4"   LN444X-015L 4×3×4"   LN444X-015 4×3×4"   LN444X-020L 4×3×4"  
LN444X-020 4×3×4"   LN444X-030L 4×3×4"   LN444X-030 4×3×4"   LN444X-040L 4×3×4"  
LN444X-040 4×3×4"  

THREADED CAP (FIPT)
LN135-015 1-1/2"   LN135-020 2"   LN135-030 3"  

TRAP ADAPTER (HUB x SJ)
LN104-012 1-1/4"   LN104-015 1-1/2"   LN104-020 2"   LN104-212 1-1/2" X 1-1/4"  

TRAP ADAPTER (SPGXSJ)
LN103-012 1-1/4"   LN103-015 1-1/2"   LN103-020 2"   LN103-212 1-1/2" X 1-1/4"  

TRAP ADAPTER W/ PLASTIC NUT & WASHER (HUB×SJ)
LN104X-012 1-1/4"   LN104X-015 1-1/2"   LN104X-020 2"   LN104X-212 1-1/2×1-1/4"  

TRAP ADAPTER W/ PLASTIC NUT & WASHER (SPG×SJ)
LN103X-012 1-1/4"   LN103X-015 1-1/2"   LN103X-020 2"   LN103X-212 1-1/2×1-1/4"  

TRAP ADAPTER W/CHROME NUT & WASHER (HUB×SJ)
LN104W-020 2"   LN104W-212 1-1/2×1-1/4"  

TRAP ADAPTER W/CHROME NUT & WASHER (SPG×SJ)
LN103W-015 1-1/2"   LN103W-020 2"   LN103W-212 1-1/2×1-1/4"  

TRAP ADAPTER W/PLASTIC NUT (HUB×SJ)
LN104P-012 1-1/4"   LN104P-015 1-1/2"   LN104P-212 1-1/2×1-1/4"  

TRAP ADAPTER W/PLASTIC NUT (SPG×SJ)
LN103P-012 1-1/4"   LN103P-015 1-1/2"   LN103P-212 1-1/2×1-1/4"  

TRAY PLUG ADAPTER
LN900-015 1-1/2"  

TRAY PLUG ADAPTER - SPIGOT
LN130X-015 1-1/2"  

TWO-WAY CLEANOUT (HUB×HUB×HUB)
LN448-030 3"   LN448-040 4"  

UNION (HUB×HUB)
LN126-015 1-1/2"   LN126-020 2"   LN126-030 3"   LN126-040 4"  

VENT TEE (HUB×HUB×HUB)
LN441-015 1-1/2"   LN441-020 2"   LN441-030 3"   LN441-040 4"  
LN441-337 3"×3"×1-1/2"   LN441-338 3"×3"×1-1/2"   

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[2] XXX - Size
          012 - 1 1/4"
          015 - 1 1/2"
          020 - 2"
          030 - 3"
          040 - 4"
          060 - 6"
          080 - 8"
          100 - 10"
          120 - 12"
          169 - 1 1/4" x 1 1/2"
          212 - 1 1/2" x 1 1/4"
          213 - 1 1/2" x 2"
          241 - 2" × 1 1/2" × 1 1/2" or 2" × 1 1/2" × 1 1/2" × 1 1/2"
          251 - 2" × 1 1/2" or 2" × 2" × 1 1/2" × 1 1/2"
          253 - 2" x 3"
          337 - 3" × 1 1/2" or 3" × 3" × 1 1/2" or 3" × 3" × 3" × 1 1/2"
          338 - 3" × 2" or 3" × 3" × 2" or 3" × 3" × 3" × 2"
          342 - 3" x 4"
          415 - 4" × 4" × 1/2"
          420 - 4" × 2" or 4" × 4" × 2" or 4" × 4" × 4" × 2"
          422 - 4" × 3" or 4" × 4" × 3" or 4" × 4" × 4" × 3"
          532 - 6" × 4" or 6" × 6" × 4" or 6" × 6" × 6" × 4"
          582 - 8" × 4" or 8" × 8" × 4" or 8" × 8" × 8" × 4"
          585 - 8" × 6" or 8" × 8" × 6" or 8" × 8" × 8" × 6"
          626 - 10" × 6" or 10" × 10" × 6" or 10" × 10" × 10" × 6"
          628 - 10" × 8" or 10" × 10" × 8" or 10" × 10" × 10" × 8"
          670 - 12" × 10" or 12" × 12" × 10" or 12" × 12" × 12" × 10"
[3] Figure numbers may have the following prefix used to identify retail packaging
    requirements: R
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Fittings¢ § [2] [3] [G]		  
ABS		  
Viterra		  
CSA B181.1

22½° ELBOW (HUB×HUB)
LN324-015 1-1/2"   LN324-020 2"   LN324-030 3"   LN324-040 4"  
LN324-060 6"  

22½° STREET ELBOW (HUB×SPG)
LN326-015 1-1/2"   LN326-020 2"   LN326-030 3"   LN326-040 4"  

45° DOUBLE WYE (ALL HUB)
LN611-015 1-1/2"   LN611-020 2"   LN611-030L 3"   LN611-030 3"  
LN611-040 4"  

45° ELBOW (HUB×HUB)
LN321-012 1-1/4"   LN321-015 1-1/2"   LN321-020L 2"   LN321-030L 3"  
LN321-040 4"   LN321-060 6"  

45° ELBOW-SHORT TURN (HUB×HUB)
LN321-015S 1-1/2"   LN321-020S 2"   LN321-030S 3"   LN321-040S 4"  

45° REDUCING DOUBLE WYE (ALL HUB)
LN612-251 2 x 2 x 1-1/2 x 1-1/2"   LN612-337 3 x 3 x 1-1/2 x 1-1/2"   LN612-338 3×3×2×2"   LN612-420 4 x 4 x 2 x 2"  
LN612-422 4 x 4 x 3 x 3"   LN612-532 6 x 6 x 4 x 4"  

45° REDUCING STREET WYE(SPG×HUB×HUB)
LN603-251 2 x 2 x 1-1/2"   LN603-337 3 x 3 x 1-1/2"   LN603-338 3 x 3 x 2"   LN603-420 4 x 4 x 2"  
LN603-422 4 x 4 x 3"  

45° REDUCING WYE (HUB×HUB×HUB)
LN601-241 2×1-1/2×1-1/2"   LN601-251L 2×2×1-1/2"   LN601-251 2×1-1/2×1-1/2"   LN601-337L 3×3×1-1/2"  
LN601-337 2×1-1/2×1-1/2"   LN601-338L 3×3×2"   LN601-338 2×1-1/2×1-1/2"   LN601-419 4 x 4 x 1-1/2"  
LN601-420L 4×4×2"   LN601-420 2×1-1/2×1-1/2"   LN601-422L 4×4×3"   LN601-422 2×1-1/2×1-1/2"  
LN601-530 6 x 6 x 3"   LN601-532 6×6×4"  

45° STREET ELBOW (HUB×SPG)
LN323-012 1-1/4"   LN323-015 1-1/2"   LN323-020L 2"   LN323-030L 3"  
LN323-040 4"   LN323-060 6"  

45° STREET ELBOW-SHORT TURN (HUB×SPG)
LN323-015S 1-1/2"   LN323-020S 2"   LN323-030S 3"   LN323-040S 4"  

45° STREET WYE (SPG×HUB×HUB)
LN602-015 1 1/2"   LN602-020 2"   LN602-030 3"   LN602-040 4"  

45° WYE (HUB×HUB×HUB)
LN600-012 1-1/4"   LN600-015L 1-1/2"   LN600-015 1-1/2"   LN600-020L 2"  
LN600-020 2"   LN600-030L 3"   LN600-030 3"   LN600-040L 4"  
LN600-040 4"   LN600-060 6"   LN601-209 1-1/2×1-1/2"×1/2"   LN601-210 1-1/2×1-1/2"×3/4"  

60° ELBOW (HUB×HUB)
LN319-015 1-1/2"   LN319-020 2"   LN319-030 3"   LN319-040 4"  

60° STREET ELBOW (HUB×SPG)
LN320-015 1-1/2"   LN320-020 2"   LN320-030 3"   LN320-040 4"  

90° ELBOW (HUB×HUB)
LN300-012 1-1/4"   LN300-015 1-1/2"   LN300-020 2"   LN300-030 3"  
LN300-040 4"   LN300-060 6"  

90° ELBOW W/ LOW HEEL INLET (HUB×HUB×HUB)
LN303-337 3 x 3 x 1-1/2"   LN303-338 3 x 3 x 2"   LN303-420 4 x 4 x 2"  

90° ELBOW WITH SIDE INLET (HUB×HUB×HUB)
LN300S-337 3 x 3 x 1-1/2"   LN300S-338 3 x 3 x 2"  

90° ELBOW-SHORT TURN (HUB×HUB)
LN300-012S 1-1/4"   LN300-015S 1-1/2"   LN300-020S 2"   LN300-030S 3"  
LN300-040S 4"   LN300-060S 6"  

90° LONG SWEEP ELBOW (HUB×HUB)
LN304-012 1-1/4"   LN304-015 1-1/2"   LN304-020 2"   LN304-030 3"  
LN304-040 4"  

90° LONG SWEEP ELBOW, STREET (HUB×SPG)
LN309-015 1-1/2"   LN309-020 2"   LN309-030 3"   LN309-040 4"  

90° REDUCING CLOSET ELBOW (HUB×HUB)
LN329-422 4×3"  

90° REDUCING CLOSET ST ELBOW W/ TEST CAP (HUB×SPG)
LN330X-342 3 x 4"   LN330X-422 4 x 3"  

90° REDUCING CLOSET STREET ELBOW (HUB×SPG)
LN330-342 3 x 4"   LN330-422 4 x 3"  

90° STREET ELBOW (HUB×SPG)
LN302-012 1-1/4"   LN302-015 1-1/2"   LN302-020 2"   LN302-030 3"  
LN302-040 4"   LN302-060 6"  

90° STREET ELBOW W/ LOW HEEL INLET (HUB×SPG×HUB)
LN310-338 3 x 3 x 2"  

90° STREET ELBOW W/ LOW HEEL INLET (HUB×SPG×HUB)
LN310-338 3 x 3 x 2"  

90° STREET ELBOW-SHORT TURN (HUB×SPG)
LN302-015S 1-1/2"   LN302-020S 2"   LN302-030S 3"   LN302-040S 4"  

90° VENT ELBOW (HUB×HUB)
LN331-012 1-1/4"   LN331-015 1-1/2"   LN331-020 2"   LN331-030 3"  
LN331-040 4"  

ABS-COPPER ADAPTER (HUB×SJ)
LN120-015 1-1/2"   LN120-212 1-1/2×1-1/4"  

CAP (HUB)
LN116-012 1-1/4"   LN116-015 1-1/2"   LN116-020 2"   LN116-030 3"  
LN116-040 4"   LN116-060 6"  

CLEANOUT ADAPTER (SPG×FIPT)
LN105-012 1-1/4"   LN105-015 1-1/2"   LN105-020 2"   LN105-030 3"  
LN105-040 4"   LN105-060 6"  

CLEANOUT ADAPTER W/PLUG (SPG×CLEANOUT W/PLUG)
LN105X-012 1-1/4"   LN105X-015 1-1/2"   LN105X-020 2"   LN105X-030 3"  
LN105X-040 4"   LN105X-060 6"  

CLEANOUT PLUG (MIPT)
LN106-015 1-1/2"   LN106-020 2"   LN106-025 2-1/2"   LN106-030 3"  
LN106-035 3-1/2"   LN106-040 4"  

CLEANOUT WYE (HUB×HUB×FIPT)
LN604-015 1-1/2"  

CLOSET FLANGE W/ADJUSTABLE METAL RING (H)
LN811-040 4"  

CLOSET FLANGE W/ADJUSTABLE METAL RING (S)
LN811-040 4"×4"  

CLOSET FLANGE (FIPT)
LN830-422 4 x 3  

CLOSET FLANGE (HUB)
LN800-040 4×4"   LN800-422L 4×3"   LN800-422 4×3"  

CLOSET FLANGE (MIPT)
LN831-422 4 x 3"  

CLOSET FLANGE W/ KNOCKOUT TEST PLUG (HUB)
LN800T-040 4 x 4"   LN800T-422L 4 x 3"   LN800T-422 4 x 3"  

CLOSET FLANGE W/ PIPE STOP (HUB)
LN815PS-040 4 x 4 / 4 x 3  

CLOSET FLANGE W/ADJUSTABLE PLASTIC RING (HUB)
LN810P-040 4 x 4"  

CLOSET FLANGE W/ADJUSTABLE PLASTIC RING (SPG)
LN812P-040 4 x 4"   LN812P-422 4 x 3"  

CLOSET FLANGE W/KONCKOUT & PIPE STOP (HUB)
LN815K-040 4 x 4 / 4 x 3  

CLOSET FLANGE W/RING-PULL TEST PLUG (HUB)
LN800R-040 4 x 4"   LN800R-422L 4 x 3"   LN800R-422 4 x 3"  

CLOSET FLANGE W/THREADED TEST PLUG (HUB)
LN800T-040C 4"   LN800T-422CL 4 x 3"   LN800T-422C 4 x 3"  

COMBINATION WYE & 1/8 BEND(ONE PIECE)(HUB×HUB×HUB)
LN501-015 1-1/2"   LN501-020 2"   LN501-030 3"   LN501-040 4"  

COMBINATION WYE & 1/8 BEND(TWO PIECE)(HUB×HUB×HUB)
LN503-020 2"  

COUPLING (HUB×HUB)
LN100-012 1-1/4"   LN100-015 1-1/2"   LN100-020 2"   LN100-030 3"  
LN100-040 4"   LN100-060 6"  

DOUBLE 90° ELBOW (HUB×HUB×HUB)
LN327-015 1-1/2"   LN327-020 2"   LN327-030 3"   LN327-040 4"  
LN327-241 2 x 1-1/2 x 1-1/2"  

DOUBLE FIXTURE FITTING (ALL HUB)
LN500-020 2"   LN500-030 3"   LN500-241 2 x 1-1/2 x 1-1/2 x 1-1/2"   LN500-251 2" × 2" × 1-1-2" ×1-1-2"  
LN500-257 2 x 1-1/2 x 2 x 2"   LN500-338 3 x 2 x 3 x 3"  

DOUBLE SANITARY TEE (ALL HUB)
LN428-015 1-1/2"   LN428-020 2"   LN428-030 3"   LN428-040 4"  

DOUBLE SANITARY TEE W / R & L SIDE INLET(ALL HUB)
LN439-338 3 x 3 x 3 x 3 x 2 x 2"  

DOUBLE SANITARY TEE W /SIDE INLET (ALL HUB)
LN438-337 3 x 3 x 3 x 3 x1-1/ 2"   LN438-338 3 x 3 x 3 x 3 x 2"   LN438-420 4 x 4x 4 x 4 x 2"  

DRUM TRAP W / CLEANOUT
LN702X-363 3 x 6 x 1-1/2"  

EXPANSION JOINT (HUB×HUB)
LNH119-015 1-1/2"   LNH119-020 2"   LNH119-030 3"   LNH119-040 4"  

EXPANSION JOINT (HUB×SPG)
LNH119S-030 3"  

FEMALE ADAPTER (HUB×FIPT)
LN101-012 1-1/4"   LN101-015 1-1/2"   LN101-020 2"   LN101-030 3"  
LN101-040 4"   LN101-060 6"  

FLUSH ADAPTER (SPG×FIPT)
LN108-209 1-1/2×1/2"   LN108-210 1-1/2×3/4"   LN108-212 1-1/2 x 1-1/4"   LN108-251 2 x 1-1/2"  
LN108-337 3×1-1/2"   LN108-338 3x 2"   LN108-422 4x 3"  

FLUSH BUSHING (SPG×HUB)
LN107-212 1-1/2×1-1/4"   LN107-251 2×1-1/2"   LN107-337 3×1-1/2"   LN107-338 3×2"  
LN107-419 4×1-1/2   LN107-420 4×2"   LN107-422 4×3"   LN107-532 6×4"  

FLUSH C.O. PLUG (MPT)
LN110-020 2"   LN110-030 3"   LN110-040 4"  

FLUSH CLOSET FLANGE (INSIDE 4", OUTSIDE 3")
LN815-040 4 x 4 / 4 x 3  

HUB ADAPTER CAST IRON (HUB×SJ)
LN123-020 2"   LN123-030 3"   LN123-040 4"  

HUB ADAPTER CAST IRON INCREASER (HUB×SJ)
LN123R-213 1-1/2 x 2"   LN123R-342 3 x 4"  

LA PATTERN P-TRAP W/UNION&PLASTIC NUT(HUB×SJ)
LN711M-015 1-1/2"   LN711M-212 1-1/2 x 1-1/4"  

MALE ADAPTER (HUB×MIPT)
LN109-012 1-1/4"   LN109-015 1-1/2"   LN109-020 2"   LN109-030 3"  
LN109-040 4"   LN109-212 1-1/2×1-1/4"  

MALE ADAPTER (SPG×MIPT)
LN111-012 1-1/4"   LN111-015 36893   LN111-020 2"   LN111-030 3"  
LN111-040 4"   LN111-212 1-1/2×1-1/4"  

NO-HUB ADAPTER (SPG×HUB)
LN119-020 2"   LN119-030 3"   LN119-040 4"   LN119-251 2 x 1-1/2"  
LN119-422 4 x 3"  

P-TRAP (HUB×HUB)
LN706X-015 1-1/2"   LN706X-020 2"   LN706X-030 3"   LN706X-040 4"  

P-TRAP W/PLUG (HUB×HUB×CLEANOUT W/PLUG)
LN707X-015 1-1/2"   LN707X-020 2"  

P-TRAP W/UNION &C/O (HUB×HUB×C/O)
LN712-015 1-1/2"  

P-TRAP W/UNION JOINT (HUB×HUB)
LN708P-012 1-1/4"   LN708P-015 1-1/2"   LN708P-020 2"  

PIPE INCREASER-REDUCER (HUBxHUB)
LN102-212 1-1/2×1-1/4"   LN102-251 2×1-1/2"   LN102-337 3×1-1/2"   LN102-338 3×2"  
LN102-419 4×1-1/2"   LN102-420L 4×2"   LN102-420 4 x 2"   LN102-422L 4×3"  
LN102-422 4×3"  

PLUG WITH GASKET (MIPT)
LN106R-012 1-1/4"   LN106R-015 1-1/2"   LN106R-020 2"   LN106R-025 2-1/2"  
LN106R-030 3"   LN106R-035 2-1/2"   LN106R-040 4"   LN106R-060 6"  

REDUCING CLOSET FLANGE (SPG)
LN801-422 4 x 3"  

REDUCING COMBINATION WYE & 1/8 BEND(HUB×HUB×HUB)
LN502-241 2 x 1-1/2 x 1-1/2"   LN502-251 2 x 2 x 1-1/2"   LN502-257 2 x 1-1/2 x 2"   LN502-337 3 x 3 x 1-1/2"  
LN502-338 3 x 3 x 2"   LN502-420 4 x 4 x 2"   LN502-422 4 x 4 x 3"  

REDUCING DOUBLE SANITARY TEE (ALL HUB)
LN429-251 2×2×1-1/2×1-1/2"   LN429-337 3×3×1-1/2×1-1/2"   LN429-338 3 x 3 x 2 x 2"   LN429-420 4 x 4 x 2 x 2"  
LN429-422 4 x 4 x 3 x 3"   LN429-323 3 x 3 x 2 x 1-1/2"  

REDUCING SANITARY TEE (HUB×HUB×HUB)
LN401-222 1-1/2 x 1-1/4 x 1-1/4"   LN401-212 1-1/2 x 1-1/2 x 1-1/4"   LN401-225 1-1/2 x 1-1/4 x 1-1/2"   LN401-241L 2×1-1/2×1-1/2"  
LN401-241 3×3×2"   LN401-251L 2×2×1-1/2"   LN401-251 3×3×2"   LN401-257L 2×1-1/2×2"  
LN401-257 3×3×2"   LN401-337 3×3×1-1/2"   LN401-338L 3×3×2"   LN401-338 3×3×2"  
LN401-419 4 x 4 x 1-1/2"   LN401-420 4×4×2"   LN401-422 4×4×3"   LN401-532 6 x 6 x 4"  

REDUCING STREET SANITARY TEE (SPG×HUB×HUB)
LN404-241 2×1-1/2×1-1/2"   LN404-251 2×2×1-1/2"   LN404-257 2×1-1/2×2"   LN404-337 3×3×1-1/2"  
LN404-338 3 x 3 x 2"  

REPAIR COUPLING (HUB×HUB)
LN130-015 1-1/2"   LN130-020 2"   LN130-030 3"   LN130-040 4"  

RETURN BEND (HUB×HUB)
LN700-015 1-1/2"   LN700-020 2"   LN700-030 3"   LN700-040 4"  

RETURN BEND (HUB×HUB×CLEANOUT W/PLUG)
LN701-015 1-1/2"   LN701-020 2"  

SANITARY TEE (HUB×HUB×HUB)
LN400-012L 1-1/4"   LN400-012 1-1/4"   LN400-015L 1-1/2"   LN400-015 1-1/2"  
LN400-020L 2"   LN400-020 2"   LN400-030 3"   LN400-040L 4"  
LN400-040 4"   LN400-060 6"  

SANITARY TEE W / LEFT SIDE INLET (ALL HUB)
LN417-337 3 x 3 x 3 x 1-1/2"  

SANITARY TEE W / LEFT SIDE INLET (ALL HUB)
LN416-337 3 x 3 x 3 x 1-1/2"  

SANITARY TEE W / LEFT SIDE INLET (ALL HUB)
LN417-338 3 x 3 x 3 x 2"  

SANITARY TEE W / LEFT SIDE INLET (ALL HUB)
LN416-338 3 x 3 x 3 x 2"   LN416-329 3 x 3 x 2 x 2"  

SANITARY TEE W / LEFT SIDE INLET (ALL HUB)
LN417-329 3 x 3 x 2 x 2"  

SANITARY TEE W / LEFT SIDE INLET (ALL HUB)
LN416-420 4 x 4 x 4 x 2"  

SANITARY TEE W / LEFT SIDE INLET (ALL HUB)
LN417-420 4 x 4 x 4 x 2"  

SANITARY TEE W / R& L SIDE INLET (ALL HUB)
LN418-337 3 x 3 x 3 x 1-1/2 x 1-1/2"   LN418-338 3 x 3 x 3 x 2 x 2"   LN418-420 4"×4"×4"×2"×2"  

SEWER & DRAIN ADAPTER (HUBxHUB)
LN117-422 4×3"   LN117-342 3 x 4"  

SLIP PLUG (SPG)
LN110S-015 1-1/2"   LN110S-020 2"   LN110S-025 2-1/2"   LN110S-030 3"  
LN110S-035 3-1/2"   LN110S-040 4"  

STREET SANITARY TEE (SPG×HUB×HUB)
LN403-015 1-1/2"   LN403-020 2"   LN403-030 3"   LN403-040 4"  

TEST TEE (HUBxHUBxFIPT)
LN445-015 1 -1/2"   LN445-015L 1 -1/2"   LN445-020 2"   LN445-020L 2"  
LN445-030 3"   LN445-030L 3"   LN445-040 4"   LN445-040L 4"  
LN445-427 4×3×4"  

TEST TEE (HUB×HUB×CLEANOUT W/PLUG)
LN444X-427 4×3×4"   LN444X-015L 4×3×4"   LN444X-015 4×3×4"   LN444X-020L 4×3×4"  
LN444X-020 4×3×4"   LN444X-030L 4×3×4"   LN444X-030 4×3×4"   LN444X-040L 4×3×4"  
LN444X-040 4×3×4"  

THREADED CAP (FIPT)
LN135-015 1-1/2"   LN135-020 2"   LN135-030 3"  

TRAP ADAPTER (HUB x SJ)
LN104-012 1-1/4"   LN104-015 1-1/2"   LN104-020 2"   LN104-212 1-1/2" X 1-1/4"  

TRAP ADAPTER (SPGXSJ)
LN103-012 1-1/4"   LN103-015 1-1/2"   LN103-020 2"   LN103-212 1-1/2" X 1-1/4"  

TRAP ADAPTER W/ PLASTIC NUT & WASHER (HUB×SJ)
LN104X-012 1-1/4"   LN104X-015 1-1/2"   LN104X-020 2"   LN104X-212 1-1/2×1-1/4"  

TRAP ADAPTER W/ PLASTIC NUT & WASHER (SPG×SJ)
LN103X-012 1-1/4"   LN103X-015 1-1/2"   LN103X-020 2"   LN103X-212 1-1/2×1-1/4"  

TRAP ADAPTER W/CHROME NUT & WASHER (HUB×SJ)
LN104W-020 2"   LN104W-212 1-1/2×1-1/4"  

TRAP ADAPTER W/CHROME NUT & WASHER (SPG×SJ)
LN103W-015 1-1/2"   LN103W-020 2"   LN103W-212 1-1/2×1-1/4"  

TRAP ADAPTER W/PLASTIC NUT (HUB×SJ)
LN104P-012 1-1/4"   LN104P-015 1-1/2"   LN104P-212 1-1/2×1-1/4"  

TRAP ADAPTER W/PLASTIC NUT (SPG×SJ)
LN103P-012 1-1/4"   LN103P-015 1-1/2"   LN103P-212 1-1/2×1-1/4"  

TRAY PLUG ADAPTER
LN900-015 1-1/2"  

TRAY PLUG ADAPTER - SPIGOT
LN130X-015 1-1/2"  

TWO-WAY CLEANOUT (HUB×HUB×HUB)
LN448-030 3"   LN448-040 4"  

UNION (HUB×HUB)
LN126-015 1-1/2"   LN126-020 2"   LN126-030 3"   LN126-040 4"  

VENT TEE (HUB×HUB×HUB)
LN441-015 1-1/2"   LN441-020 2"   LN441-030 3"   LN441-040 4"  
LN441-337 3"×3"×1-1/2"   LN441-338 3"×3"×1-1/2"   

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[2] XXX - Size
          012 - 1 1/4"
          015 - 1 1/2"
          020 - 2"
          030 - 3"
          040 - 4"
          060 - 6"
          080 - 8"
          100 - 10"
          120 - 12"
          169 - 1 1/4" x 1 1/2"
          212 - 1 1/2" x 1 1/4"
          213 - 1 1/2" x 2"
          241 - 2" × 1 1/2" × 1 1/2" or 2" × 1 1/2" × 1 1/2" × 1 1/2"
          251 - 2" × 1 1/2" or 2" × 2" × 1 1/2" × 1 1/2"
          253 - 2" x 3"
          337 - 3" × 1 1/2" or 3" × 3" × 1 1/2" or 3" × 3" × 3" × 1 1/2"
          338 - 3" × 2" or 3" × 3" × 2" or 3" × 3" × 3" × 2"
          342 - 3" x 4"
          415 - 4" × 4" × 1/2"
          420 - 4" × 2" or 4" × 4" × 2" or 4" × 4" × 4" × 2"
          422 - 4" × 3" or 4" × 4" × 3" or 4" × 4" × 4" × 3"
          532 - 6" × 4" or 6" × 6" × 4" or 6" × 6" × 6" × 4"
          582 - 8" × 4" or 8" × 8" × 4" or 8" × 8" × 8" × 4"
          585 - 8" × 6" or 8" × 8" × 6" or 8" × 8" × 8" × 6"
          626 - 10" × 6" or 10" × 10" × 6" or 10" × 10" × 10" × 6"
          628 - 10" × 8" or 10" × 10" × 8" or 10" × 10" × 10" × 8"
          670 - 12" × 10" or 12" × 12" × 10" or 12" × 12" × 12" × 10"
[3] Figure numbers may have the following prefix used to identify retail packaging
    requirements: R
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

DWV Pipe[1]		  
PVC		  
Viterra		  
ASTM D2665
1 1/4" - 6" Sch 40 

[1] Certification includes the following:
    1 1/4" - 24" Sch 40 DWV pipe, ASTM D2665
    VP011-012 1-1/4"
    VP001-080 8"
    VP011-080 8"        
    VP001-100 10"
    VP011-100 10"       
    VP001-120 12"
    VP011-120 12"       
    VP001-140 14"
    VP011-140 14"       
    VP001-160 16"
    VP011-160 16"       
    VP001-180 18"
    VP011-180 18"       
    VP001-200 20"
    VP011-200 20"       
    VP001-240 24"
    VP011-240 24"

Fittings¢ § [3] [G]		  
PVC		  
Viterra		  
ASTM D2665

Wye (H x H x H)
2" (PD600-020)   6" (PD600-060)   4" (PD600-040)   3" (PD600-030)   

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[3] Figure numbers may have the following prefix used to identify retail packaging
    requirements: R
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Fittings¢ § [3] [G]		  
PVC		  
Viterra		  
CSA B181.2

Wye (H x H x H)
2" (PD600-020)   6" (PD600-060)   4" (PD600-040)   3" (PD600-030)   

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[3] Figure numbers may have the following prefix used to identify retail packaging
    requirements: R
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Fittings¢ § [3] [G]		  
ABS		  
Viterra		  
ASTM D2661

22½° STREET ELBOW (HUB×SPG)
A326-015 1-1/2"   A326-040 4"   A326-030 3"   A326-020 2"   

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[3] Figure numbers may have the following prefix used to identify retail packaging
    requirements: R
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Fittings¢ § [2] [3] [G]		  
ABS		  
Viterra		  
CSA B181.1

22½° STREET ELBOW (HUB×SPG)
A326-015 1-1/2"   A326-040 4"   A326-030 3"   A326-020 2"   

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[2] XXX - Size
          012 - 1 1/4"
          015 - 1 1/2"
          020 - 2"
          030 - 3"
          040 - 4"
          060 - 6"
          080 - 8"
          100 - 10"
          120 - 12"
          169 - 1 1/4" x 1 1/2"
          212 - 1 1/2" x 1 1/4"
          213 - 1 1/2" x 2"
          241 - 2" × 1 1/2" × 1 1/2" or 2" × 1 1/2" × 1 1/2" × 1 1/2"
          251 - 2" × 1 1/2" or 2" × 2" × 1 1/2" × 1 1/2"
          253 - 2" x 3"
          337 - 3" × 1 1/2" or 3" × 3" × 1 1/2" or 3" × 3" × 3" × 1 1/2"
          338 - 3" × 2" or 3" × 3" × 2" or 3" × 3" × 3" × 2"
          342 - 3" x 4"
          415 - 4" × 4" × 1/2"
          420 - 4" × 2" or 4" × 4" × 2" or 4" × 4" × 4" × 2"
          422 - 4" × 3" or 4" × 4" × 3" or 4" × 4" × 4" × 3"
          532 - 6" × 4" or 6" × 6" × 4" or 6" × 6" × 6" × 4"
          582 - 8" × 4" or 8" × 8" × 4" or 8" × 8" × 8" × 4"
          585 - 8" × 6" or 8" × 8" × 6" or 8" × 8" × 8" × 6"
          626 - 10" × 6" or 10" × 10" × 6" or 10" × 10" × 10" × 6"
          628 - 10" × 8" or 10" × 10" × 8" or 10" × 10" × 10" × 8"
          670 - 12" × 10" or 12" × 12" × 10" or 12" × 12" × 12" × 10"
[3] Figure numbers may have the following prefix used to identify retail packaging
    requirements: R
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.


# This product may be marked with an alternate trade name: Liansu.

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings+ ¢ § [1] [G]		  
PVC		  
Viterra		  
ASTM D2466

1/4 Bend w/ Low Heel Inlet (H x H x H)
1 1/2" - 12" (LP303-xxx)  

45° Elbow (SOC x SOC)
3/4" (417-007)   2" (417-020)  

45° Ell (SOC x SOC)
1/4" - 6" (417-xxx)  

90° Elbow (SOC x SOC)
1/2" (406-005)   3/4" (406-007   1" (406-010)   1 1/4" (406-012)  
1 1/2" (406-015)   2" (406-020)   2 1/2" (406-025)   3" (406-030)  
4" (406-040)   6" (406-060)  

90° Reducing Ell (SOC x FIPT)
1/4" - 6" (407-xxx)  

90° Street Ell (SPIG x SOC)
1/4" - 6" (409-xxx)  

Cap (SOC)
3/4" (447-007)   4" (447-040)  

Cleanout Plug (MPT)
1 1/2" - 12" (LP106-xxx)  

Cleanout Tee w/ C.O. Plug (H x H)
1 1/2" - 12" (LP444X-xxx)  

Combo Wye and 1/8 Bend, Reducing (One Pc)(All HUB)
1 1/4" - 12" (LP502-xxx)  

Coupling (H x H)
1 1/2" - 12" (LP100-xxx)  

Coupling (SOC x SOC)
3/4" (429-007)   1" (429-010)   1 1/2" (429-015)   2" (429-020)  
3" (429-030)   4" (429-040)  

Female Adapter (FPT x H)
1 1/2" - 12" (LP101-xxx)  

Flush Bushing (S x H)
1 1/2" - 12" (LP107-xxx)  

Flush C.O. Tee (H x H x FPT)
1 1/2" - 12" (LP445-xxx)  

Long Sweep 1/4 Bend, Street (H x S)
1 1/2" - 12" (LP309-xxx)  

Male Adapter (MIPT x SOC)
3/4" (436-007)  

Reducing Double Wye (ALL HUB)
(LP612-xxx)  

Reducing Tee (SOC x SOC x FIPT)
1/4" - 6" (402-xxx)  

Return Bend (H x H)
1 1/2" - 12" (LP700-xxx)  

Tee (SOC x SOC x SOC)
1/2" (401-005)   3/4" (401-007)   1" (401-010)   1 1/2" (401-015)  
2" (401-020)   3" (401-030)   6" (401-060)   1/4" - 6" (401-xxx)  

Trap Elbow (for use with Traps only) (H x S)
1 1/4" - 12" (LP335-xxx)  

Vent Ell, Street (H x S)
1 1/4" - 12" (LP333-xxx)   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Figure numbers may have the following prefix used to identify retail packaging
    requirements: R
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Fittings+ ¢ [1] [4] [G]		  
PVC		  
Viterra		  
ASTM F1970

Compression Coupling (GASKET x GASKET)
IR90-05 (1/2")   IR90-15 (1 1/2")   IR90-40 (4")   IR90-07 (3/4")  
IR90-20 (2")   IR90-60 (6")   IR90-10 (1")   IR90-25 (2 1/2")  
IR90-12 (1 1/4")   IR90-30 (3")  

Compression Tee (GASKET x GASKET x FIPT)
IR91-05 (1/2")   IR91-07 (3/4")   IR91-10 (1")  

Expand Repair Coupling (SOC x SPIG)
FSF-250 (2 1/2")   FSF-300 (3")   FSF-400 (4")   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Figure numbers may have the following prefix used to identify retail packaging
    requirements: R
[4] PVC Fittings rated as 200psi at 23ºC.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Fittings+ ¢ [1] [4] [G]		  
PVC		  
Viterra		  
CSA B137.3

Compression Coupling (GASKET x GASKET)
IR90-05 (1/2")   IR90-15 (1 1/2")   IR90-40 (4")   IR90-07 (3/4")  
IR90-20 (2")   IR90-60 (6")   IR90-10 (1")   IR90-25 (2 1/2")  
IR90-12 (1 1/4")   IR90-30 (3")  

Compression Tee (GASKET x GASKET x FIPT)
IR91-05 (1/2")   IR91-07 (3/4")   IR91-10 (1")  

Expand Repair Coupling (SOC x SPIG)
FSF-250 (2 1/2")   FSF-300 (3")   FSF-400 (4")   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Figure numbers may have the following prefix used to identify retail packaging
    requirements: R
[4] PVC Fittings rated as 200psi at 23ºC.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Fittings+ [1] [5] [G]		  
PVC		  
Viterra		  
ASTM F1970

Union w/o-ring Seal (FIPT × FIPT)
1/4" - 6" (898-xxx)  

Union w/o-ring Seal (SOC × FIPT)
1/4" - 6" (899-xxx)   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Figure numbers may have the following prefix used to identify retail packaging
    requirements: R
[5] PVC Fittings rated as 235psi at 23ºC
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Fittings+ ¢ [1] [5] [G]		  
PVC		  
Viterra		  
ASTM F1970

Expand Repair Coupling (SOC x SPIG)
FSF-050 (1/2")   FSF-150 (1 1/2")   FSF-075 (3/4")   FSF-200 (2")  
FSF-100 (1")   FSF-125 (1 1/4")   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Figure numbers may have the following prefix used to identify retail packaging
    requirements: R
[5] PVC Fittings rated as 235psi at 23ºC
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Fittings+ ¢ [1] [G]		  
PVC		  
Viterra		  
CSA B137.3

Expand Repair Coupling (SOC x SPIG)
FSF-050 (1/2")   FSF-150 (1 1/2")   FSF-075 (3/4")   FSF-200 (2")  
FSF-100 (1")   FSF-125 (1 1/4")  

Union w/ O-ring Seal (FIPT x FIPT)
498-005 (1/2")   498-015 (1 1/2")   498-007 (3/4")   498-020 (2")  
498-010 (1")   498-012 (1 1/4")  

Union w/ O-ring Seal (SOC x SOC)
497-005 (1/2")   497-015 (1 1/2")   497-007 (3/4")   497-020 (2")  
497-010 (1")   497-012 (1 1/4")   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Figure numbers may have the following prefix used to identify retail packaging
    requirements: R
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Fittings+ ¢ § [1] [5] [G]		  
PVC		  
Viterra		  
ASTM F1970

Union w/ O-ring Seal (SOC x SOC)
897-xxx (1/4" - 6")  

Union w/o-ring Seal (FIPT × FIPT)
1/4" - 6" (898-xxx)  

Union w/o-ring Seal (SOC × FIPT)
1/4" - 6" (899-xxx)  

Union w/o-ring Seal (SOC × MIPT)
1/4" - 6" (896-xxx)   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Figure numbers may have the following prefix used to identify retail packaging
    requirements: R
[5] PVC Fittings rated as 235psi at 23ºC
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Fittings+ ¢ § [1] [6] [G]		  
PVC		  
Viterra		  
ASTM F1970

Blind Flange
1/4" - 12" (853-xxx)  

Expand Repair Coupling (SOC x SPIG)
FSF-600 (6")  

Flange One Piece (SOC)
1/4" - 12" (851-xxx)  

Flange Two Pieces (SOC)
1/4" - 12" (854-xxx)  

Flange Van Stone Style W/PVC Ring (SPIG)
1/4" - 12" (856-xxx)  

Floor Flange (FIPT)
852-xxx (1/4" - 6")  

Union w/ O-ring Seal (FIPT x FIPT)
498-005 (1/2")   498-007 (3/4")   498-010 (1")   498-012 (1 1/4")  
498-015 (1 1/2")   498-020 (2")  

Union w/ O-ring Seal (SOC x SOC)
497-005 (1/2")   497-007 (3/4")   497-010 (1")   497-012 (1 1/4")  
497-015 (1 1/2")   497-020 (2")   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Figure numbers may have the following prefix used to identify retail packaging
    requirements: R
[6] PVC Fittings rated as 150psi at 23ºC
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Fittings+ ¢ § [1] [G]		  
PVC		  
Viterra		  
CSA B137.3

Union w/ O-ring Seal (SOC x SOC)
897-xxx (1/4" - 6")  

Union w/o-ring Seal (FIPT × FIPT)
1/4" - 6" (898-xxx)  

Union w/o-ring Seal (SOC × FIPT)
1/4" - 6" (899-xxx)  

Union w/o-ring Seal (SOC × MIPT)
1/4" - 6" (896-xxx)   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Figure numbers may have the following prefix used to identify retail packaging
    requirements: R
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

PVC Pipe 		 
PVC		  
Viterra		  
ASTM D1785
1/8" - 24" Sch 40[2]

1/8" - 24" Sch 80[3] 

[2] Certification includes the following:
    1/8" - 24" Sch40 PVC pipe
    031-001 1/8"        
    031-002 1/4"        
    031-003 3/8"
    031-100 10" 
    031-120 12" 
    031-140 14" 
    031-160 16" 
    031-180 18" 
    031-200 20" 
    031-240 24" 
    041-001 1/8"        
    041-002 1/4"        
    041-003 3/8"
    041-005 1/2"        
    041-100 10" 
    041-120 12" 
    041-140 14" 
    041-160 16" 
    041-180 18" 
    041-200 20" 
    041-240 24"

[3] Certification includes the following:
    1/8" - 24" Sch80 PVC Pipe
    071-001 1/8"        
    071-002 1/4"        
    071-003 3/8"        
    071-035 3-1/2"
    071-050 5"
    071-080 8"  
    071-100 10" 
    071-120 12" 
    071-140 14" 
    071-160 16" 
    071-180 18" 
    071-200 20" 
    071-240 24" 
    081-001 1/8"        
    081-002 1/4"        
    081-003 3/8"        
    081-035 3-1/2"      
    081-050 5"          
    081-080 8"  
    081-100 10" 
    081-120 12" 
    081-140 14" 
    081-160 16" 
    081-180 18" 
    081-200 20" 
    081-240 24"

Pipe + [7] [G]		  
PE 4710		  
Viterra		  
ASTM F714
3" - 18" DIPS DR 11
4" - 18" IPS DR 11 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[7] Certification includes the following:
    LE011-030   3 in
    LE011-040   4 in
    LE011-060   6 in
    LE011-080  8 in
    LE011-100  10 in
    LE011-120  12 in
    LE011-180  18 in
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Pipe+ [7] [G]		  
PE 4710		  
Viterra		  
ASTM F714
3" - 18" DIPS DR 11
4" - 18" IPS DR 11 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[7] Certification includes the following:
    LE011-030   3 in
    LE011-040   4 in
    LE011-060   6 in
    LE011-080  8 in
    LE011-100  10 in
    LE011-120  12 in
    LE011-180  18 in
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.


Sewer Main - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+ [2] [G]		  
PE 4710		  
Viterra		  
ASTM F714
4" - 18" IPS DR 11
3" - 18" DIPS DR 11 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certification includes the following:
    LE011-030   3 in
    LE011-040   4 in
    LE011-060   6 in
    LE011-080  8 in
    LE011-100  10 in
    LE011-120  12 in
    LE011-180  18 in
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Solvent Weld Sewer Pipe[1]		  
PVC		  
Viterra		  
ASTM D3034
3" - 8" DR 35 

[1] Certification includes the following:
    3" - 8" DR 35 Solvent Weld Sewer Pipe, ASTM D3034
    LSW002-030 3"
    LSW002-040 4"
    LSW002-060 6"
    LSW002-080 8"

Pipe+ [2] [G]		  
PE 4710		  
Viterra		  
ASTM F714
4" - 18" IPS DR 11
3" - 18" DIPS DR 11 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certification includes the following:
    LE011-030   3 in
    LE011-040   4 in
    LE011-060   6 in
    LE011-080  8 in
    LE011-100  10 in
    LE011-120  12 in
    LE011-180  18 in
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Solvent Weld Sewer Pipe[1]		  
PVC		  
Viterra		  
ASTM D3034
3" - 8" DR 35 

[1] Certification includes the following:
    3" - 8" DR 35 Solvent Weld Sewer Pipe, ASTM D3034
    LSW002-030 3"
    LSW002-040 4"
    LSW002-060 6"
    LSW002-080 8"

Number of matching Manufacturers is 1
Number of matching Products is 1156
Processing time was 0 seconds