NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, January 15, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?Company=C0879044&Standard=014&

NSF/ANSI 14
Plastics Piping System Components and Related Materials

Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document

Viterra Systems LLC
1830 Fllower Ave.
Duarte, CA 91010
United States
1-626-716-2238

Facility : Guangdong, China

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings§ [1]	ABS	Viterra	ASTM D2661
22 1/2° Elbow (HUB x HUB)
LN324-015 (1 1/2")	LN324-020 (2")	LN324-030 (3")	LN324-040 (4")
LN324-060 (6")
22 1/2° Street Elbow (HUB x Spg)
LN326-015 (1 1/2")	LN326-020 (2")	LN326-030 (3")	LN326-040 (4")
45° Double Wye (All HUB)
LN611-015 (1 1/2")	LN611-020 (2")	LN611-030 (3")	LN611-030L (3")
LN611-040 (4")
45° Elbow (HUB x HUB)
LN321-012 (1 1/4")	LN321-015 (1 1/2")	LN321-020L (2")	LN321-030L (3")
LN321-040 (4")	LN321-060 (6")
45° Elbow Long-Turn (HUB x HUB)
LN321-020 (2")	LN321-030 (3")
45° Elbow-Short Turn (HUB x HUB)
LN321-015S (1 1/2")	LN321-020S (2")	LN321-030S (3")	LN321-040S (4")
45° Reducing Double Wye (ALL HUB)
LN612-251 (2" x 2" x 1 1/2" x 1-1/2")	LN612-337 (3" x 3" x 1 1/2" x 1 1/2")	LN612-338 (3" x 3" x 2" x 2")	LN612-420 (4" x 4" x 2" x 2")
LN612-422 (4" x 4" x 3" x 3")	LN612-532 (6" x 6" x 4" x 4")
45° Reducing Street Wye (Spg x HUB x HUB)
LN603-251 (2" x 2" x 1 1/2")	LN603-337 (3" x 3" x 1 1/2")	LN603-338 (3" x 3" x 2")	LN603-420 (4" x 4" x 2")
LN603-422 (4" x 4" x 3")
45° Reducing Wye (HUB x HUB x HUB)
LN601-251L (2" x 2" x 1 1/2")	LN601-337L (3" x 3" x 1 1/2")	LN601-338L (3" x 3" x 2")	LN601-419 (4" x 4" x 1 1/2")
LN601-420L (4" x 4" x 2")	LN601-422L (4" x 4" x 3")	LN601-530 (6" x 6" x 3")
45° Street Elbow (HUB x Spg)
LN323-012 (1 1/4")	LN323-015 (1 1/2")	LN323-020L (2")	LN323-030L (3")
LN323-040 (4")	LN323-060 (6")
45° Street Elbow Long-Turn (HUB x Spg)
LN323-020 (2")	LN323-030 (3")
45° Street Elbow-Short Turn (HUB x Spg)
LN323-015S (1 1/2")	LN323-020S (2")	LN323-030S (3")	LN323-040S (4")
LN323-060 (6")
45° Street Wye (Spg x HUB x HUB)
LN602-015 (1 1/2")	LN602-020 (2")	LN602-030 (3")	LN602-040 (4")
45° Wye (HUB x HUB x HUB)
LN600-012 (1 1/4")	LN600-015 (1 1/2")	LN600-015L (1 1/2")	LN600-020 (2")
LN600-020L (2")	LN600-030 (3")	LN600-030L (3")	LN600-040 (4")
LN600-040L (4")	LN600-060 (6")	LN601-241 (2" x 1 1/2" x 1 1/2")	LN601-251 (2" x 2" x 1 1/2")
LN601-337 (3" x 3" x 1 1/2")	LN601-338 (3" x 3" x 2")	LN601-420 (4" x 4" x 2")	LN601-422 (4" x 4" x 3")
LN601-532 (6" x 6" x 4")
60° Elbow (HUB x HUB)
LN319-015 (1 1/2")	LN319-020 (2")	LN319-030 (3")	LN319-040 (4")
60° Street Elbow (HUB x Spg)
LN320-015 (1 1/2")	LN320-020 (2")	LN320-030 (3")	LN320-040 (4")
90° Double Elbow (HUB x HUB x HUB)
LN327-015 (1 1/2")	(LN327-020 (2")	LN327-030 (3")	LN327-040 (4")
LN327-241 (2 x 1 1/2 x 1 1/2")
90° Elbow (HUB x HUB)
LN300-012 (1 1/4")	LN300-015 (1 1/2")	LN300-020 (2")	LN300-030 (3")
LN300-040 (4")	LN300-060 (6")
90° Elbow w/ Low Heel Inlet (HUB x HUB x HUB)
LN303-337 (3" x 3" x 1 1/2")	LN303-338 (3" x 3" x 2")	LN303-420 (4" x 4" x 2")
90° Elbow-Short Turn (HUB x HUB)
LN300-012S (1 1/4")	LN300-015S (1 1/2")	LN300-020S (2")	LN300-030S (3")
LN300-040S (4")	LN300-060S (6")
90° Long Sweep Elbow (HUB x HUB)
LN304-012 (1 1/4")	LN304-015 (1 1/2")	LN304-020 (2")	LN304-030 (3")
LN304-040 (4")
90° Long Sweep Elbow, Street (HUB x SPG))
LN309-015 (1 1/2")	LN309-020 (2")	LN309-030 (3")	LN309-040 (4")
90° Reducing Closet Elbow (HUB x HUB)
LN329-422 (4" x 3")
90° Reducing Closet St. Elbow w/Test Cap(HUBxSpg)
LN330X-342 (3" x 4")	LN330X-422 (4" x 3")
90° Reducing Closet Street Elbow (HUB x Spg)
LN330-342 (3" x 4")	LN330-422 (4" x 3")
90° Street Elbow (Hub x Spg)
LN302-012 (1 1/4")	LN302-015 (1 1/2")	LN302-020 (2")	LN302-030 (3")
LN302-040 (4")	LN302-060 (6")
90° Street Elbow w/Low Heel Inlet (HUBxSpgxHUB)
LN310-338 (3" x 3" x 2")
90° Street Elbow-Short Turn (HUB x Spg)
LN302-015S (1 1/2")	LN302-020S (2")	LN302-030S (3")	LN302-040S (4")
90° Vent Elbow (HUB x HUB)
LN331-012 (1 1/4")	LN331-015 (1 1/2")	LN331-020 (2")	LN331-030 (3")
(LN331-040 (4")
Adapter Bushing (DWV Spg X S&D HUB)
LN118-030 (3")	LN118-040 (4")
Cap (HUB)
LN116-012 (1 1/4")	LN116-015 (1 1/2")	LN116-020 (2")	LN116-030 (3")
LN116-040 (4")	LN116-060 (6")
Cast Iron Adapter (HUB x HUB)
LN125-040 (4")
Cast Iron HUB Adapter (Spigot x HUB)
LN124-020 (2")	LN124-040 (4")	LN124-422 (4" x 3")
Cleanout Adapter (Spg x FIPT)
LN105-012 (1 1/4")	LN105-015 (1 1/2")	LN105-020 (2")	LN105-030 (3")
LN105-040 (4")	LN105-060 (6")
Cleanout Adapter w/ Plug (Spg x Cleanout w/ Plug)
LN105X-012 (1 1/4")	LN105X-015 (1 1/2")	LN105X-020 (2")	LN105X-030 (3")
LN105X-040 (4")	LN105X-060 (6")
Cleanout Plug (MIPT)
LN106-012 (1 1/4")	LN106-015 (1 1/2")	LN106-020 (2")	LN106-025 (2 1/2")
LN106-030 (3")	LN106-035 (3 1/2")	LN106-040 (4")
Closet Flange (FIPT)
LN830-422 (4" x 3")
Closet Flange (HUB)
LN800-040 (4" x 4")	LN800-422 (4" x 3")	LN800-422L (4" x 3")
Closet Flange (MIPT)
LN831-422 (4" x 3")
Closet Flange w/ Adjustable Metal Ring (H)!
LN81-040 (4")	LN81-422 (4" x 3")
Closet Flange w/ Adjustable Metal Ring (S)!
LN812-040 (4")	LN812-422 (4" x 3")
Closet Flange w/ Adjustable Plastic Ring (HUB)
LN810P-422 (4" × 3")	LN810P-040 (4" x 4")
Closet Flange w/ Adjustable Plastic Ring (Spg)
LN812P-040 (4" x 4")	LN812P-422 (4" x 3")
Closet Flange w/ Knockout & Pipe Stop (HUB)
LN815K-040 (4" x 4"/ 4" x 3")
Closet Flange w/ Knockout Test Plug (HUB)
LN800T-040 (4" x 4")	LN800T-422 (4" x 3")	LN800T-422L (4" x 3")
Closet Flange w/ Pipe Stop (HUB)
LN815PS-040 (4" x 4" / 4" x 3" )
Closet Flange w/ Ring-Pull Test Plug (HUB)
LN800R-040 (4" x 4")	LN800R-422 (4" x 3")	LN800R-422L (4" x 3")
Closet Flange w/ Screw Test Plug (HUB)
LN800T-422C (4" x 3")	LN800T-422CL (4" x 3")	LN800T-040C (4")
Closet Flange, w/ Adjustable w/ PVC Plastic Ring*
LN820P-422 (4" x 3")
Combination Wye & 1/8 Bend (1 Piece) (HUBxHUBxHUB)
LN501-015 (1 1/2")	LN501-020 (2")	LN501-030 (3")	LN501-040 (4")
Combination Wye & 1/8 Bend(Two Piece)(HUBxHUBxHUB)
LN503-020 (2")
Counter Sunk Plug (MIPT)
LN106C-015 (1 1/2")	LN106C-020 (2")	LN106C-030 (3")	LN106C-040 (4")
Coupling (HUB x HUB)
LN100-012 (1 1/4")	LN100-015 (1 1/2")	LN100-020 (2")	LN100-030 (3")
LN100-040 (4")	LN100-060 (6")
Double Fixture Fitting (All HUB)
LN500-020 (2")	LN500-030 (3")	LN500-241 (2" x 1 1/2" x 1 1/2" x 1 1/2")	LN500-251 (2" x 2" x 1 1/2" x 1 1/2")
LN500-257 (2" x 1 1/2" x 2" x 2")	LN500-338 (3" x 2" x 3" x 3")
Double Sanitary Tee (All HUB)
LN428-015 (1 1/2")	LN428-020 (2")	LN428-030 (3")	LN428-040 (4")
LN429-337 (3" x 3" x 1 1/2" x 1 1/2")
Double Sanitary Tee w/ R & L Side Inlet (ALL HUB)
LN439-338 (3" x 3" x 3" x 3" x 2" x 2")
Double Sanitary Tee w/ Side Inlet (ALL HUB)
LN438-337 (3" x 3" x 3" x 3" x 1 1/ 2")	LN438-338 (3" x 3" x 3" x 3" x 2")	LN438-420 (4" x 4" x 4" x 4" x 2")
Female Adapter (HUB x FIPT)
LN101-012 (1 1/4")	LN101-015 (1 1/2")	LN101-020 (2")	LN101-030 (3")
LN101-040 (4")	LN101-060 (6")
Flush Adapter (Spg x FIPT)
LN108-209 (1 1/2" x 1/2")	LN108-210 (1 1/2" x 3/4")	LN108-212 (1 1/2 x 1 1/4")	LN108-251 (2" x 1 1/2")
LN108-337 (3" x 1 1/2")	LN108-338 (3" x 2")	LN108-422 (4" x 3")
Flush Bushing (Spg x HUB)
LN107-212 (1 1/2" x 1 1/4")	LN107-251 (2" x 1 1/2")	LN107-337 (3" x 1 1/2")	LN107-338 (3" x 2")
LN107-419 (4" x 1 1/2")	LN107-420 (4" x 2")	LN107-422 (4" x 3")	LN107-532 (6" x 4")
Flush C.O. Plug (MPT)§
LN110-020 (2")	LN110-040 (4")	LN110-030 (3")
Flush Closet Flange (Inside 4", Outside 3")
LN815-040 (4" x 4" / 4" x 3")
Male Adapter (HUB x MIPT)
LN109-012 (1 1/4")	LN109-015 (1 1/2")	LN109-020 (2")	LN109-030 (3")
LN109-040 (4")	LN109-212 (1 1/2" x 1 1/4")
Male Adapter (Spg x MIPT)
LN111-012 (1 1/4")	LN111-015 (1 1/2")	LN111-020 (2")	LN111-030 (3")
LN111-040 (4")	LN111-212 (1 1/2 x 1 1/4")
No-Hub Adapter (Spg x HUB)
LN119-020 (2")	LN119-030 (3")	LN119-040 (4")	LN119-251 (2" x 1 1/2")
LN119-422 (4" x 3")
Offset Closet Flange,w/ Adjustable Metal Ring (H)!
LN820-040 (4")	LN820-422 (4" x 3")
P-Trap (Hub x Hub)
LN706X-015 (1 1/2")	LN706X-020 (2")	LN706X-030 (3")	LN706X-040 (4")
P-Trap w/ Union Joint (Hub x Hub)
LN708P-012 (1 1/4")	LN708P-015 (1 1/2")
Pipe Increaser-Reducer (HUB x HUB)
LN102-212 (1 1/2" x 1 1/4")	LN102-251 (2" x 1 1/2")	LN102-337 (3" x 1 1/2")	LN102-338 (3" x 2")
LN102-420 (4" x 2")	LN102-420L (4" x 2")	LN102-422 (4" x 3")	LN102-422L (4" x 3")
Red. Comb. Wye & 1/8 Bend (1 Piece)(HUBxHUBxHUB)
LN502-241 (2" x 1 1/2" x 1 1/2")	LN502-251 (2" x 2" x 1 1/2")	LN502-257 (2" x 1 1/2" x 2")	LN502-337 (3" x 3" x 1 1/2")
LN502-338 (3" x 3" x 2")	LN502-420 (4" x 4" x 2")	LN502-422 (4" x 4" x 3")
Reducing Closet Flange (Spg)
LN801-422 (4" x 3")
Reducing Double Sanitary Tee (ALL HUB)
LN429-251 (2" x 2" x 1 1/2" x 1 1/2")	LN429-323 (3" x 3" x 2" x 1 1/2")	LN429-337 (3" x 3" x 1 1/2" x 1 1/2")	LN429-338 (3" x 3" x 2" x 2")
LN429-420 (4" x 4" x 2" x 2")	LN429-422 (4" x 4" x 3" x 3")
Reducing Sanitary Tee (HUB x HUB x HUB)
LN401-212 (1 1/2" x 1 1/2" x 1 1/4")	LN401-222 (1 1/2" x 1 1/4" x 1 1/4")	LN401-225 (1 1/2" x 1 1/4" x 1 1/2")	LN401-241L (2" x 1 1/2" x 1 1/2")
LN401-251L (2" x 2" x 1 1/2")	LN401-257L (2" x 1 1/2" x 2")	LN401-337 (3" x 3" x 1 1/2")	LN401-338L (3" x 3" x 2")
LN401-419 (4" x 4" x 1 1/2")	LN401-420 (4" x 4" x 2")	LN401-422 (4" x 4" x 3")	LN401-532 (6" x 6" x 4")
Reducing Street Sanitary Tee (Spg x HUB x HUB)
LN404-241 (2" x 1 1/2" x 1 1/2")	LN404-251 (2" x 2' x 1 1/2")	LN404-257 (2" x 1 1/2" x 2")	LN404-337 (3" x 3" x 1 1/2")
LN404-338 (3" x 3" x 2")
Reducing Vent Tee (HUB x HUBx HUB)
LN441-337 (3" x 3"x 1 1/2")	LN441-338 (3"x 3"x 2")
Return Bend (Hub x Hub)
LN700-xxx (1 1/2" - 12")
Sanitary Tee (HUB x HUB x HUB)
LN400-012 (1 1/4")	LN400-012L (1 1/4")	LN400-015 (1 1/2")	LN400-015L (1 1/2")
LN400-020 (2")	LN400-020L (2")	LN400-030 (3")	LN400-040 (4")
LN400-040L (4")	LN400-060 (6")	LN401-241 (2" x 1 1/2" x 1 1/2")	LN401-251 (2" x 2" x 1 1/2")
LN401-257 (2" x 1 1/2" x 2")	LN401-338 (3" x 3" x 2")
Sanitary Tee w/ Left Side Inlet (All HUB)
LN416-337 (3" x 3" x 3" x 1 1/2")	LN416-338 (3" x 3" x 3" x 2")	LN416-329 (3" x 3" x 2" x 2")	LN416-420 (4" x 4" x 4" x 2")
Sanitary Tee w/ Right Side Inlet (ALL HUB)
LN417-329 (3" x 3" x 2" x 2")	LN417-337 (3" x 3" x 3" x 1 1/2")	LN417-338 (3" x 3" x 3" x 2")	LN417-420 (4" x 4" x 4" x 2")
Sanitary Tee with R & L Side Inlets (All HUB)
LN418-337 (3" x 3" x 3" x 1 1/2" x 1 1/2")	LN418-338 (3" x 3" x 3" x 2" x 2")	LN418-420 (4" x 4" x 4" x 2" x 2")
Sewer Drain Adapter (HUB x HUB)
LN117-422 (4" x 3")
Slip Plug (Spg)
LN110S-015 (1 1/2")	LN110S-020 (2")	LN110S-025 (2 1/2")	LN110S-030 (3")
(LN110S-035 (3 1/2")	LN110S-040 (4")
Street Sanitary Tee (Spg x HUB x HUB)
LN403-015 (1 1/2")	LN403-020 (2")	LN403-030 (3")	LN403-040 (4")
Swivel Tray Plug (Spg x FIPT)
LN114-015 (1 1/2")
Swivel Tray Plug Adapter (HUB x FIPT)
LN112-015 (1 1/2")	LN112-212 (1 1/2" x 1 1/4")
Test Tee (HUB x HUB x Cleanout w/ Plug)
LN444X-015L (1 1/2")	LN444X-020L (2")	LN444X-030L (3")	LN444X-040L (4")
Test Tee (HUB x HUB x Cleanout)
LN444X-015 (1 1/2")	LN444X-020 (2")	LN444X-030 (3")	LN444X-040 (4")
Test Tee (HUB x HUB x FIPT)
LN445-015 (1 1/2")	LN445-020 (2")	LN445-030 (3")	LN445-040 (4")
LN445-015L (1 1/2")	LN445-020L (2")	LN445-030L (3")	LN445-040L (4")
Threaded Cap (FIPT)
LN135-015 (1 1/2")	LN135-020 (2")	LN135-030 (3")
Trap Adapter (HUB x SJ)
LN104P-012 (1 1/4")	LN104P-015 (1 1/2")	LN104P-212 (1 1/2" x 1 1/4")
Trap Adapter w/ Chrome Nut & Washer (HUB x SJ)
LN104C-020 (2")	LN104W-020 (2")	LN104C-212 (1 1/2 x 1 1/4")	LN104W-212 (1 1/2 x 1 1/4")
Trap Adapter w/ Chrome Nut & Washer (Spg x SJ)
LN103C-015 (1 1/2")	LN103W-015 (1 1/2")	LN103C-020 (2")	LN103W-020 (2")
LN103C-212 (1 1/2 x 1 1/4")	LN103W-212 (1 1/2 x 1 1/4")
Trap Adapter w/ Plastic Nut & Washer (Spg x SJ)
LN103X-012 (1 1/4")	LN103X-015 (1 1/2")	LN103X-020 (2")	LN103X-212 (1 1/2 x 1 1/4")
Trap Adapter w/ Plastic Nut (HUB x SJ)
LN104X-012 (1 1/4")	LN104X-015 (1 1/2")	LN104X-020 (2")	LN104X-212 (1 1/2" x 1 1/4")
Trap Adapter w/ Plastic Nut (Spg x SJ)
LN103P-012 (1 1/4")	LN103P-015 (1 1/2")	LN103P-212 (1 1/2" x 1 1/4")
Trap Adapter-Female (Hub x SJ) (without nut)
LN104-xxx (1 1/4" - 2")
Trap Adapter-Male (Spg x SJ) (without nut)
LN103-xxx (1 1/4" - 2")
Tray Plug Adapter (Spg x Female NPSM)
LN113-015 (1 1/2")
Two-Way Cleanout (HUB x HUB x HUB)
LN448-030 (3")	LN448-040 (4")
Vent Tee (HUB x HUB x HUB)
LN441-015 (1 1/2")	LN441-020 (2")	LN441-030 (3")	LN441-040 (4")
! Epoxy coated * 1 1/2" Offset § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Figure numbers may have one of the following optional prefixes used to identify retail packaging requirements: URP, U, UTP, USP, UPP, UP, UMP, UHP, UBP, PP, MPP, RP, MRP, RLN, LN, RS, MRR, RL, CPRLN, or RLR.
Fittings# [2] [4]	PVC	Viterra	ASTM D2665
P-Trap w/ Cleanout (H x H)
1 1/2" - 12" (LP707X-xxx)
# This product may be marked with an alternate trade name: Liansu. [2] XXX - size 012 - 1 1/4" 015 - 1 1/2" 020 - 2" 030 - 3" 040 - 4" 060 - 6" 080 - 8" 100 - 10" 120 - 12" 169 - 1 1/4" x 1 1/2" 212 - 1 1/2" x 1 1/4" 213 - 1 1/2" x 2" 241 - 2" × 1 1/2" × 1 1/2" or 2" × 1 1/2" × 1 1/2" × 1 1/2" 251 - 2" × 1 1/2" or 2" × 2" × 1 1/2" × 1 1/2" 253 - 2" x 3" 337 - 3" × 1 1/2" or 3" × 3" × 1 1/2" or 3" × 3" × 3" × 1 1/2" 338 - 3" × 2" or3" × 3" × 2" or 3" × 3" × 3" × 2" 342 - 3" x 4" 415 - 4" × 4" × 1/2" 420 - 4" × 2" or 4" × 4" × 2" or 4" × 4" × 4" × 2" 422 - 4" × 3" or 4" × 4" × 3" or 4" × 4" × 4" × 3" 532 - 6" × 4" or 6" × 6" × 4" or 6" × 6" × 6" × 4" 582 - 8" × 4" or 8" × 8" × 4" or 8" × 8" × 8" × 4" 585 - 8" × 6" or 8" × 8" × 6" or 8" × 8" × 8" × 6" 626 - 10" × 6" or 10" × 10" × 6" or 10" × 10" × 10" × 6" 628 - 10" × 8" or 10" × 10" × 8" or 10" × 10" × 10" × 8" 670 - 12" × 10" or 12" × 12" × 10" or 12" × 12" × 12" × 10" [4] Figure numbers may have the following prefix used to identify retail packaging requirements: R
Fittings# § [2] [4]	PVC	Viterra	ASTM D2665
(LP104R-015)1 1/2" x 1 1/2" x 1 1/2" x 1 1/4"
And 1-1/2×1-1/4 Washer (H×SLIP)	1-1/2" Trap Adapter-Female w/1-1/2 Plastic Nut & Washer
1/16 Bend (H x H)
1 1/2" - 12" (LP324-xxx)
1/16 Bend, Street (H x S)
1 1/2" - 12" (LP326-xxx)
1/4 Bend (H x H)
1 1/2" - 12" (LP300-xxx)
1/4 Bend w/ Low Heel Inlet (H x H x H)
1 1/2" - 12" (LP303-xxx)
1/4 Bend, Street (S x H)
1 1/2" - 12" (LP302-xxx)
1/4 Bend, Street w/ Low Heel Inlet (H x S x H)
1 1/2" - 12" (LP310-xxx)
1/6 Bend (H x H)
1 1/2" - 12" (LP319-xxx)
1/6 Bend, Street (H x S)
1 1/2" - 12" (LP320-xxx)
1/8 Bend (H x H)
1 1/2" - 12" (LP321-xxx)
1/8 Bend, Street (H x S)
1 1/2" - 12" (LP323-xxx)
2-Way Cleanout (ALL HUB)
3", 4", 6" (LP448-xxx)
Adapter Bushing (DWV SPIGOT x HUB)
1 1/2" - 12" (LP118-xxx)
Adapter Coupling (H x H)
1 1/2" - 12" (LP117-xxx)
Adjustable P-Trap w/ Plastic Nut (H x H)
1 1/2" - 2" (LP708P-xxx)
Cap (SOC)
1 1/2" - 12" (LP116-xxx)
Cleanout Plug (MPT)
1 1/2" - 12" (LP106-xxx)
Cleanout Tee w/ C.O. Plug (H x H)
1 1/2" - 12" (LP444X-xxx)
Closet Bend, Reducing (H x H)
3" x 4" (LP329-xxx)
Closet Bend, Street, Reducing(H x S)
3" x 4" (LP330-xxx)
Closet Flange (H)
1 1/2" - 12" (LP800-xxx)
Closet Flange w/ Adjustable Plastic Ring (H)
LP810P-040 (4")
Closet Flange, Reducing (SPIGOT)
1 1/2" - 12" (LP801-xxx)
Closet Flange, w/ Stop, Adj w/ Plastic Ring (H)
LP810S-040 (4")	LP810S-342 (3" x 4")
Closet Flange,w/ Adjustable w/ PVC Plastic Ring
LP820P-422 (4" x 3")
Combination Wye and 1/8 Bend (One Piece) (All HUB)
1 1/4" - 12" (LP501-xxx)
Combination Wye and 1/8 Bend (Two Piece) (All HUB)
1 1/4" - 12" (LP503-xxx)
Combo Wye and 1/8 Bend, Reducing (One Pc)(All HUB)
1 1/4" - 12" (LP502-xxx)
Combo Wye and 1/8 Bend, Reducing (Two Pc)(All HUB)
1 1/4" - 12" (LP504-xxx)
Coupling (H x H)
1 1/2" - 12" (LP100-xxx)
Dishwasher Wye (H x H x Hose Barb)
1 1/2" x 1 1/2" x 1/2" (LP601-209)
Double 1/4 Bend (H x H x H)
1 1/2" - 4" (LP327-xxx
Double Fixture Fitting (ALL HUB)
1 1/2" - 12" (LP500-xxx)
Double Sanitary Tee (ALL HUB)
1 1/2" - 12" (LP428-xxx)
Double Sanitary Tee, Reducing (ALL HUB)
LP429-xxx	2" x 2" x 1 1/2" x 1 1/2"	3" x 3" x 1 1/2" x 1 1/2"	3" x 3" x 2" x 2"
4" x 4" x 1 1/2" x 1 1/2"	4" x 4" x 2" x 2"	4" x 4" x 3" x 3"	6" x 6" x 3" x 3"
6" x 6" x 4" x 4"	8" x 8" x 4" x 4"	8" x 8" x 6" x 6"
Double Wye (ALL HUB)
1 1/2" - 12" (LP611-xxx)
Female Adapter (FPT x H)
1 1/2" - 12" (LP101-xxx)
Fitting Cleanout Adapter (S x FPT)
1 1/2" - 12" (LP105-xxx)
Fitting Cleanout Adapter w/ C.O. Plug (S x FPT)
1 1/2" - 12" (LP105X-xxx)
Flush Bushing (S x H)
1 1/2" - 12" (LP107-xxx)
Flush C.O. Tee (H x H x FPT)
1 1/2" - 12" (LP445-xxx)
Flush Closet Flange
1 1/2" - 12" (LP815-xxx)
Hub Adapter (H x S)
2" - 4" (LP123-xxx)
Hub Adapter (H x S)
LP123-213 (1 1/2" x 2")	LP123-253 (2" x 3")	LP123-342 (3" x 4")
Long Sweep 1/4 Bend (H x H)
1 1/2" - 12" (LP304-xxx)
Long Sweep 1/4 Bend w/ Low Heel Inlet (All HUB)
1 1/2" - 12" (LP307-xxx)
Long Sweep 1/4 Bend, Street (H x S)
1 1/2" - 12" (LP309-xxx)
Male Adapter (MPT x H)
1 1/2" - 12" (LP109-xxx)
No-Hub Adapter (S x H)
1 1/2" - 12" (LP119-xxx)
Offset Closet Flange,w/ Adjustable Metal Ring (H)!
LP820-040 (4")
P-Trap (H x H)
1 1/2" - 12" (LP706X-xxx)
P-Trap, Low Profile (H x H)
1 1/4" - 12" (LP710-xxx)
Pipe Increaser - Reducer (H x H)
(LP102-xxx)	2" x 1 1/2"	3" x 1 1/2"	3" x 2"
4" x 2"	4" x 3"	6" x 3"	6" x 4"
8" x 4"	8" x 6"	10" x 4"	10" x 6"
10" x 8"	12" x 6"	12" x 8"	12" x 10"
Reducing Double Wye (ALL HUB)
(LP612-xxx)	2" x 2" x 1 1/2" x 1 1/2"	3" x 3" x 1 1/2" x 1 1/2"	3" x 3" x 2" x 2"
4" x 4" x 2" x 2"	4" x 4" x 3" x 3"	6" x 6" x 3" x 3"	6" x 6" x 4" x 4"
8" x 8" x 4" x 4"	8" x 8" x 6" x 6"	10" x 10" x 4" x 4"	10" x 10" x 6" x 6"
10" x 10" x 8" x 8"	12" x 12" x 4" x 4"	12" x 12" x 6" x 6"	12" x 12" x 8" x 8"
12" x 12" x 10" x 10"
Reducing Sanitary Tee (ALL HUB)
LP401-415 (4" x 4" x 1/2")	2" x 1 1/2" x 1 1/2"	2" x 2" x 1 1/2"	2" x 1 1/2" x 2"
3" x 3" x 1 1/2"	3" x 3" x 2"	4" x 4" x 1 1/2"	4" x 4" x 2"
4" x 4" x 3"	6" x 6" x 3"	6" x 6" x 4"	8" x 8" x 4"
8" x 8" x 6"
Reducing Wye (ALL HUB)
(LP601-xxx)	2" x 1 1/2" x 1 1/2"	2" x 2" x 1 1/2"	2 x 1 1/2" x 2"
3" x 3" x 1 1/2"	3" x 3" x 2"	4" x 4" x 1 1/2"	4" x 4" x 2"
4" x 4" x 3"	6" x 6" x 2"	6" x 6" x 3"
Repair Coupling (H x H)
1 1/2" - 12" (LP130-xxx)
Return Bend (H x H)
1 1/2" - 12" (LP700-xxx)
Sanitary Tee (ALL HUB)
1 1/2" - 12" (LP400-xxx)
Sanitary Tee w/ Left Side Inlet (ALL HUB)
1 1/2" - 12" (LP416-xxx)
Sanitary Tee w/ R & L Side Inlets (ALL HUB)
1 1/2" - 12" (LP418-xxx)
Sanitary Tee w/ Right Side Inlet (ALL HUB)
1 1/2" - 12" (LP417-xxx)
Threaded Cap (FPT)
LP135-012 (1 1/4")
Trap Adapter - Female w/ Plastic Nut (H x SLIP)
(LP104P-xxx)	1 1/2" x 1 1/4"	1 1/2"
Trap Adapter - Male (S x SLIP)
LP103-030 (3")
Trap Adapter Cap (FPT)
LP112-015 (1 1/2")	LP112-020 (2")
Trap Adapter Cap B (FPT)
LP113-012 (1 1/4")	LP113-020 (2")	LP113-015 (1 1/2")
Trap Adapter Cap w/ Gasket
LP114-012 (1 1/4")	LP114-015 (1 1/2")	LP114-020 (2")
Trap Adapter Gasket
LP113R-012 (1 1/4")	LP113R-015 (1 1/2")	LP113R-020 (2")
Trap Adapter Male w/Chrome Nut & Washer (S x Slip)
LP103W-212 (1 1/2" x 1 1/4")
Vent Ell (H x H)
1 1/2" - 12" (LP331-xxx)
Vent Ell, Street (H x S)
1 1/4" - 12" (LP333 - xxx)
Vent Tee (ALL HUB)
1 1/2" - 12" (LP441-xxx)
Wye (ALL HUB)
1 1/2" - 12" (LP600-xxx)
! Epoxy coated # This product may be marked with an alternate trade name: Liansu. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [2] XXX - size 012 - 1 1/4" 015 - 1 1/2" 020 - 2" 030 - 3" 040 - 4" 060 - 6" 080 - 8" 100 - 10" 120 - 12" 169 - 1 1/4" x 1 1/2" 212 - 1 1/2" x 1 1/4" 213 - 1 1/2" x 2" 241 - 2" × 1 1/2" × 1 1/2" or 2" × 1 1/2" × 1 1/2" × 1 1/2" 251 - 2" × 1 1/2" or 2" × 2" × 1 1/2" × 1 1/2" 253 - 2" x 3" 337 - 3" × 1 1/2" or 3" × 3" × 1 1/2" or 3" × 3" × 3" × 1 1/2" 338 - 3" × 2" or3" × 3" × 2" or 3" × 3" × 3" × 2" 342 - 3" x 4" 415 - 4" × 4" × 1/2" 420 - 4" × 2" or 4" × 4" × 2" or 4" × 4" × 4" × 2" 422 - 4" × 3" or 4" × 4" × 3" or 4" × 4" × 4" × 3" 532 - 6" × 4" or 6" × 6" × 4" or 6" × 6" × 6" × 4" 582 - 8" × 4" or 8" × 8" × 4" or 8" × 8" × 8" × 4" 585 - 8" × 6" or 8" × 8" × 6" or 8" × 8" × 8" × 6" 626 - 10" × 6" or 10" × 10" × 6" or 10" × 10" × 10" × 6" 628 - 10" × 8" or 10" × 10" × 8" or 10" × 10" × 10" × 8" 670 - 12" × 10" or 12" × 12" × 10" or 12" × 12" × 12" × 10" [4] Figure numbers may have the following prefix used to identify retail packaging requirements: R
Fittings# § [3] [4]	PVC	Viterra	ASTM D2665
1/4 Bend (H x FIPT)
1 1/4" - 8" (LP301-xxx)
1/4 Bend (H x H)
1 1/4" (LP300-012)
1/4 Bend, Street (S x H)
1 1/4" (LP302-012)
1/8 Bend (H x H)
1 1/4" (LP321-012)
1/8 Bend, Street (H x S)
1 1/4" (LP323-012)
11-1/4° Elbow (H x H)
1 1/4" - 12" (LP305-xxx)
11-1/4° Elbow (S x H)
1 1/4" - 12" (LP306-xxx)
22.5° Elbow-Short Turn (H x H)
1 1/4" - 12" (LP324-xxxS)
45° Elbow-Short Turn (H x H)
1 1/4" - 12" (LP321-xxxS)
45° Elbow-Short Turn (H x S)
1 1/4" - 12" (LP323-xxxS)
90° Elbow-Short Turn (H x H)
1 1/4" - 12" (LP300-xxxS)
90° Elbow-Short Turn (H x S)
1 1/4" -12" (LP302-xxxS)
Adapter Coupling (S/D SxDWV H)
4" x 3" (LP117X-422)
Adapter, Soil Pipe (H x H)
2" - 4" (LP125-xxx)
Adjustable P-Trap w/ Plastic Nut (H x H)
1 1/4" (LP708P-012)
Cleanout Plug (MPT)
1 1/4" (LP106-012)
Closet Bend Street, Reducing w/Test Cap (S x H)
3" x 4" (LP330X-342)
Closet Flange (FPT)
4" x 3" (LP830-422)
Closet Flange (MPT)
4" x 3" (LP831-422)
Closet Flange w/ Adjustable Metal Ring (H)!
4" (LP811-040)	4" x 3" (LP811-422)
Closet Flange w/ Adjustable Metal Ring (S)!
4" (LP812-040)	4" x 3" (LP812-422)
Closet Flange w/ Adjustable Plastic Ring (H)
4" (LP810-040)
Closet Flange w/ Adjustable Plastic Ring (S)
4" (LP812P-040)	4" x 3" (LP812P-422)
Closet Flange w/ Stop (H)
4" x 3" (LP800S-422)
Closet Flange w/ Test Plate (H)
4" (LP800T-040)	4" x 3" (LP800T-422)
Closet Flange, w/ Stop, Adj w/ Plastic Ring (H)
4" x 3" (LP810S-422)
Combination Wye and 1/8 Bend Double Assembly (H)
1 1/4" - 12" (LP507-xxx)
Coupling (H x H)
1 1/4" (LP100-012)
Double Sanitary Tee w/ R & L Side Inlets (All HUB)
3" x 3" x 3" x 3" x 2" x 2" (LP439-338)	4" x 4" x 4" x 4" x 2" x 2" (LP439-420)
Double Sanitary Tee w/ Side Inlet (All HUB)
3" x 3" x 3" x 3" x 1 1/2" (LP438-337)	3" x 3" x 3" x 3" x 2" (LP438-338)	4" x 4" x 4" x 4" x 2" (LP438-420)
Double Sanitary Tee, Reducing (ALL HUB)
3" x 3" x 2" x 1 1/2" (LP429-323)
Double Sanitary Tee, Street, Reducing (SxHxHxH)
3" x 3" x 2" x 2" (LP431-338)
Female Adapter (FPT x H)
1 1/4" (LP101-012)
Fitting Cleanout Adapter (S x FPT)
1 1/4" (LP105-012)
Fitting Cleanout Adapter w/ C.O. Plug (S x FPT)
1 1/4" (LP105X-012)
Flush Bushing (S x H)
1 1/2" x 1 1/4" (LP107-212)	2" x 1 1/4" (LP107-250)
Flush C.O. Plug (MPT)
1 1/4" - 8" (LP110-xxx)
Flush C.O. Tee w/ C.O. Plug (H x H x FPT)
1 1/4" - 8" (LP445X-xxx)
Hub Adapter, Cast Iron, Increaser (CI SxDWV H)
4" x 3" (LP123R-422)
Long Sweep 1/4 Bend w/ High Heel Inlet (All HUB)
3" x 3" x 2" (LP308-338)
Male Adapter (MPT x H)
1 1/4" x 1 1/2" (LP109-169)	1 1/4" (LP109-012)
Offset Closet Flange,w/ Adjustable Metal Ring (H)!
4" x 3" (LP820-422)
P-Trap (H x SLIP)
1-1/4" - 2" (LP713-xxx)
P-Trap w/ union Joint (H x FPT)
1 1/4" - 12" (LP709-xxx)
Pipe Increaser-Reducer (H × H)
1 1/2" × 1 1/4" (LP102-212)
Reducer Bushing (Dishwasher Bushing) (S x FPT)
1 1/4" - 12" (LP108-xxx)
Reducing Female Adapter (H x FPT)
1 1/2" x 1 1/4" (LP101-212)
Reducing Sanitary Tee (ALL HUB)
1 1/2" x 1 1/2" x 1 1/4" (LP401-212)
Reducing Wye (ALL HUB)
6" - 12" (LP601-xxx)
Sanitary Tee (ALL HUB)
1 1/4" (LP400-012)
Sanitary Tee, Street (S x H x H)
1 1/4" - 12" (LP403-xxx)
Sanitary Tee, Street, Reducing (S x H x H)
1 1/4" - 12" (LP404-xxx)
Spigot Adapter, Cast Iron (CI H x DWV H)
1 1/4" - 12" (LP122-xxx)
Threaded Cap (FPT)
1 1/4" - 8" (LP135-xxx)
Trap Adapter - Female (H x SLIP)
1 1/4" - 2" (LP104-xxx)
Trap Adapter - Female w/Plastic Nut (H x SLIP)
1 1/4" (LP104P-012)	2" (LP104P-020)
Trap Adapter Plug (H x NPSM Thread)
1 1/2" (LP128-015)
Trap Adapter Plug (S x NPSM Thread)
1 1/2" (LP129-015)
Trap Adapter-Female w/Brass Nut (H x SLIP)
1 1/2" x 1 1/4" (LP104B-212)
Trap Adapter-Female w/Chrome Nut & Washer (HxSLIP)
1 1/2" (LP104W-015)	1 1/2" x 1 1/4" (LP104W-212)	2" (LP104W-020)
Trap Adapter-Female w/Plastic Nut & Washer(HxSLIP)
1-1/2" (LP104X-015)	1-1/2 x 1-1/4" (LP104X-212)	1 1/4" (LP104X-012)	2" (LP104X-020)
Trap Adapter-Male (S x SLIP)
1 1/4" - 2" (LP103-xxx)
Trap Adapter-Male w/ Plastic Nut (S x SLIP)
1 1/4" - 2" (LP103P-xxx)
Trap Adapter-Male w/ Plastic Nut (S x SLIP)@
1 1/4" - 2" (LP103R-xxx)
Trap Adapter-Male w/Chrome Nut & Washer (S x SLIP)
1 1/4" - 2" (LP103W-xxx)
Trap Adapter-Male w/Plastic Nut & Washer(S x SLIP)
1 1/4" - 2" (LP103X-xxx)
Trap Elbow (for use with Traps only) (H x S)
1 1/4" - 12" (LP335-xxx)
Tube End Cleanout (H x FPT)
1 1/4" -12" (LP905-xxx)
Tube End Cleanout (H x Gasket Plug)
1 1/4" - 12" (LP905X-xxx)
Vent Ell (H x H)
1 1/4" (LP331-012)
Vent Ell, Street (H x S)
1 1/4" (LP333-012)
Washer Box P-Trap (H x H)
2" (LP716-020)
Wye (ALL HUB)
1 1/4" (LP600-012)
Wye, Street (S x H x H)
1 1/4" - 12" (LP602-xxx)
Wye, Street, Reducing (S x H x H)
1 1/4" - 12" (LP603-xxx)
! Epoxy coated @ 1 1/2” & 1 1/4" washers # This product may be marked with an alternate trade name: Liansu. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [3] Product is authorized to bear the cNSF and/or the cNSFus Mark except for 1/4, 3/8, 3-1/2 and 5 in. fittings. [4] Figure numbers may have the following prefix used to identify retail packaging requirements: R
Fittings# [1]	PVC	Viterra	ASTM D3034
1/16 Bend (H × H)
LSW324-030 (3")	LSW324-040 (4")	LSW324-060 (6")	LSW324-080 (8")
1/16 Bend, Street (S ×H)
LSW326-030 (3")	LSW326-040 (4")	LSW326-060 (6")	LSW326-080 (8")
1/4 Bend (H × H)
LSW300-030 (3")	LSW300-040 (4")	LSW300-060 (6")	LSW300-080 (8")
1/4 Bend, Street (S × H)
LSW302-040 (4")	LSW302-060 (6")	LSW302-080 (8")
1/8 Bend (H × H)
LSW321-020 (2")	LSW321-030 (3")	LSW321-040 (4")	LSW321-060 (6")
LSW321-080 (8")
1/8 Bend, Street (S ×H)
LSW323-030 (3")	LSW323-040 (4")	LSW323-060 (6")	LSW323-080 (8")
Adapter Bushing (DWV Spigot × HUB)
LP118-030 (3" x 3")	LP118-040 (4" x 4")	LP118-060 (6" x 6")
Adapter Bushing (Sewer SPGxDWV Hub)
LP117X-337 (3" x 2")	LP117X-338 (3" x 2")	LP117X-437 (4" x 2")	LP117X-420 (4" x 2")
LP117X-422 (4" x 3")	LP117X-040 (4" x 4")	LP117X-532 (6" x 4")	LP117X-060 (6" x 6")
Adapter Coupling (Sewer HUB × DWV HUB)
LP117-338 (3" x 2")	LP117-422 (4" x 3")	LP117-040 (4" x 4")	LP117-532 (6" x 4")
LP117-060 (6" x 6")
Cap (HUB)
LSW116-030 (3")	LSW116-040 (4")	LSW116-060 (6")	LSW116-080 (8")
Cleanout Plug (MPT)
LSW106-030 (3")	LSW106-040 (4")	LSW106-060 (6")	LSW106-080 (8")
Cleanout Tee (H × H × FPT)
LSW445-040 (4")
Coupling (H × H)
LSW100-030 (3")	LSW100-040 (4")	LSW100-060 (6")	LSW100-080 (8")
Downspout Adapter (DOWNSPOUTxSEWER HUB,HxH)
LSW217-0233 (2" x 3" x 3")	LSW217-0234 (2" x 3" x 4")	LSW217-0343 (3" x 3")	LSW217-0344 (3" x 4" x 4")
Drain Grate (SPG)
LSW299-030 (3")	LSW299-040 (4")	LSW299-060 (6")	LSW299-080 (8")
Extended Reducer Bushing (SPGxH)
LSW117XE-532 (6" x 4")	LSW117XE-582 (8" x 4")	LSW117XE-585 (8" x 6")
Female Adapter (FPT × H)
LSW101-030 (3")	LSW101-040 (4")	LSW101-060 (6")	LSW101-080 (8")
Fitting Cleanout Adapter (S × FPT)
LSW105-030 (3")	LSW105-040 (4")	LSW105-060 (6")	LSW105-080 (8")
Fitting Cleanout Adapter W/ C.O. Plug (S × FPT)
LSW105X-030 (3")	LSW105X-040 (4")	LSW105X-060 (6")
Flush Downspout Adapater(DOWNSPOUTxSEWER HUB, HxH)
LSW218-0233 (2" x 3" x 3")	LSW218-0234 (2" x 3" x 4")	LSW218-0344 (3" x 4" x 4")	LSW218-0466 (4" x 6" x 6")
Long Sweep 1/4 Bend (H × H)
LSW304-030 (3")	LSW304-040 (4")	LSW304-060 (6")	LSW304-080 (8")
Long Sweep 1/4 Bend, Street (S ×H )
LSW309-030 (3")	LSW309-040 (4")
Male Adapter (MPT × H)
LSW109-030 (3")	LSW109-040 (4")
Pipe Increaser-Reducer (H × H)
LSW102-338 (3" x 2")	LSW102-422 (4" x 3")	LSW102-532 (6" x 4")	LSW102-582 (8" x 4")
Reducing Bushing (S × H)
LSW107-338 (3" x 2")	LSW107-422 (4" x 3")
Reducing Double Wye (All Hub)
LSW612-532 (6" x 4")
Reducing Sanitary Tee (All Hub)
LSW400-532 (6" x 4")
Reducing Tee (All Hub)
LSW441-422 (4" x 3")	LSW441-532 (6" x 4")	LSW441-582 (8" x 4")	LSW441-585 (8" x 6")
Reducing Wye (All Hub)
LSW601-338 (3" x 2")	LSW601-422 (4" x 3")	LSW601-532 (6" x 4")	LSW601-582 (8" x 4")
LSW601-585 (8" x 6")
Repair Coupling (H × H)
LSW130-040 (4")	LSW130-060 (6")
Sanitary Tee (ALL HUB)
LSW400-030 (3")	LSW400-040 (4")	LSW400-060 (6")	LSW400-080 (8")
Tee (All Hub)
LSW441-030 (3")	LSW441-040 (4")	LSW441-060 (6")	LSW441-080 (8")
Wye (All Hub)
LSW600-030 (3")	LSW600-040 (4")	LSW600-060 (6")	LSW600-080 (8")
Wye, Street (S × H × H)
LSW602-040 (4")
# This product may be marked with an alternate trade name: Liansu. [1] Figure numbers may have one of the following optional prefixes used to identify retail packaging requirements: URP, U, UTP, USP, UPP, UP, UMP, UHP, UBP, PP, MPP, RP, MRP, RLN, LN, RS, MRR, RL, CPRLN, or RLR.
Fittings¢ [1]	ABS	Viterra	CSA B181.1
22 1/2° Elbow (HUB x HUB)
LN324-015 (1 1/2")	LN324-020 (2")	LN324-030 (3")	LN324-040 (4")
LN324-060 (6")
22 1/2° Street Elbow (HUB x Spg)
LN326-015 (1 1/2")	LN326-020 (2")	LN326-030 (3")	LN326-040 (4")
45° Double Wye (All HUB)
LN611-015 (1 1/2")	LN611-020 (2")	LN611-030 (3")	LN611-030L (3")
LN611-040 (4")
45° Elbow (HUB x HUB)
LN321-012 (1 1/4")	LN321-015 (1 1/2")	LN321-020L (2")	LN321-030L (3")
LN321-040 (4")	LN321-060 (6")
45° Elbow Long-Turn (HUB x HUB)
LN321-020 (2")	LN321-030 (3")
45° Elbow-Short Turn (HUB x HUB)
LN321-015S (1 1/2")	LN321-020S (2")	LN321-030S (3")	LN321-040S (4")
45° Reducing Double Wye (All HUB)
LN612-251 (2" x 2" x 1 1/2" x 1 1/2")	LN612-337 (3" x 3" x 1 1/2" x 1 1/2")	LN612-338 (3" x 3" x 2" x 2")	LN612-420 (4" x 4" x 2" x 2")
LN612-422 (4" x 4" x 3" x 3")	LN612-532 (6" x 6" x 4" x 4")
45° Reducing Street Wye (Spg x HUB x HUB)
LN603-251 (2" x 2" x 1 1/2")	LN603-337 (3" x 3" x 1 1/2")	LN603-338 (3" x 3" x 2")	LN603-420 (4" x 4" x 2")
LN603-422 (4" x 4" x 3")
45° Reducing Wye (HUB x HUB x HUB)
LN601-251L (2" x 2" x 1 1/2")	LN601-337L (3" x 3" x 1 1/2")	LN601-338L (3" x 3" x 2")	LN601-419 (4" x 4" x 1 1/2")
LN601-420L (4" x 4" x 2")	LN601-422L (4" x 4" x 3")	LN601-530 (6" x 6" x 3")
45° Street Elbow (HUB x Spg)
LN323-012 (1 1/4")	LN323-015 (1 1/2")	LN323-020L (2")	LN323-030L (3")
LN323-040 (4")	LN323-060 (6")
45° Street Elbow Long-Turn (HUB x Spg)
LN323-020 (2")	LN323-030 (3")
45° Street Elbow-Short Turn (HUB x Spg)
LN323-015S (1 1/2")	LN323-020S (2")	LN323-030S (3")	LN323-040S (4")
45° Street Wye (Spg x HUB x HUB)
LN602-015 (1 1/2")	LN602-020 (2")	LN602-030 (3")	LN602-040 (4")
45° Wye (HUB x HUB x HUB)
LN600-012 (1 1/4")	LN600-015 (1 1/2")	LN600-015L (1 1/2")	LN600-020 (2")
LN600-020L (2")	LN600-030 (3")	LN600-030L (3")	LN600-040 (4")
LN600-040L (4")	LN600-060 (6")	LN601-241 (2" x 1 1/2" x 1 1/2")	LN601-251 (2" x 2" x 1 1/2")
LN601-337 (3" x 3" x 1 1/2")	LN601-338 (3" x 3" x 2")	LN601-420 (4"x 4" x 2")	LN601-422 (4" x 4" x 3")
LN601-532 (6" x 6" x 4")
60° Elbow (HUB x HUB)
LN319-015 (1 1/2")	LN319-040 (4")	LN319-030 (3")	LN319-020 (2")
60° Street Elbow (HUB x Spg)
LN320-015 (1 1/2")	LN320-020 (2")	LN320-030 (3")	LN320-040 (4")
90° Double Elbow (HUB x HUB x HUB)
LN327-015 (1 1/2")	LN327-020 (2")	LN327-030 (3")	LN327-040 (4")
LN327-241 (2" x 1 1/2" x 1 1/2")
90° Elbow (HUB x HUB)
LN300-012 (1 1/4")	LN300-015 (1 1/2")	LN300-020 (2")	LN300-030 (3")
LN300-040 (4")	LN300-060 (6")
90° Elbow w/ Low Heel Inlet (HUB x HUB x HUB)
LN303-337 (3" x 3" x 1 1/2")	LN303-338 (3" x 3" x 2")	LN303-420 (4" x 4" x 2")
90° Elbow w/ Side Inlet (HUB x HUB x HUB)
LN300S-337 (3" x 3" x 1 1/2")	LN300S-338 (3" x 3" x 2")
90° Elbow-Short Turn (HUB x HUB)
LN300-012S (1 1/4")	LN300-015S (1 1/2")	LN300-020S (2")	LN300-030S (3")
LN300-040S (4")	LN300-060S (6")
90° Long Sweep Elbow (HUB x HUB)
LN304-012 (1 1/4")	LN304-015 (1 1/2")	LN304-020 (2")	LN304-030 (3")
LN304-040 (4")
90° Long Sweep Elbow, Street (HUB x SPG)
LN309-015 (1 1/2")	LN309-020 (2")	LN309-030 (3")	LN309-040 (4")
90° Reducing Closet Elbow (HUB x HUB)
LN329-422 (4" x 3")
90° Reducing Closet St. Elbow w/ Test Cap(HUBxSpg)
LN330X-342 (3" x 4")	LN330X-422 (4" x 3")
90° Reducing Closet Street Elbow (HUB x Spg)
LN330-342 (3" x 4")	LN330-422 (4" x 3")
90° Street Elbow (HUB x Spg)
LN302-012 (1 1/4")	LN302-015 (1 1/2")	LN302-020 (2")	LN302-030 (3")
LN302-040 (4")	LN302-060 (6")
90° Street Elbow w/Low Heel Inlet (HUBxSpgxHUB)
LN310-338 (3" x 3" x 2")
90° Street Elbow-Short Turn (HUB x Spg)
LN302-015S (1 1/2")	LN302-020S (2")	LN302-030S (3")	LN302-040S (4")
90° Vent Elbow (HUB x HUB)
LN331-012 (1 1/4")	LN331-015 (1 1/2")	LN331-020 (2")	LN331-030 (3")
LN331-040 (4")
ABS-Copper Adapter (HUB x SJ)
LN120-015 (1 1/2")	LN120-212 (1 1/2" x 1 1/4")
Adapter Bushing (DWV Spg x S&D HUB)
LN118-030 (3")	LN118-040 (4")
Cap (FIPT)
LN116F-015 (1 1/2")
Cap (HUB)
LN116-012 (1 1/4")	LN116-015 (1 1/2")	LN116-020 (2")	LN116-030 (3")
LN116-040 (4")	LN116-060 (6")
Cast Iron Adapter (HUB x HUB)
LN125-040 (4")
Cast Iron HUB Adapter (Spg x HUB)
LN124-020 (2")	LN124-040 (4")	LN124-422 (4" x 3")
Cleanout Adapter (Spg x FIPT)
LN105-012 (1 1/4")	LN105-015 (1 1/2")	LN105-020 (2")	LN105-030 (3")
LN105-040 (4")	LN105-060 (6")
Cleanout Adapter w/ Plug (Spg x Cleanout w/ Plug)
LN105X-012 (1 1/4")	LN105X-015 (1 1/2")	LN105X-020 (2")	LN105X-030 (3")
LN105X-040 (4")	LN105X-060 (6")
Cleanout Plug (MIPT)
LN106-012 (1 1/4")	LN106-015 (1 1/2")	LN106-020 (2")	LN106-025 (2 1/2")
LN106-030 (3")	LN106-035 (3 1/2")	LN106-040 (4")
Cleanout Wye (HUB x HUB x FIPT)
LN604-015 (1 1/2")
Closet Flange (FIPT)
LN830-422 (4 x 3")
Closet Flange (HUB)
LN800-040 (4" x 4")	LN800-422 (4" x 3")	LN800-422L (4" x 3")
Closet Flange (MIPT)
LN831-422 (4" x 3")
Closet Flange w/ Adjustable Metal Ring (H)!
LN811-040 (4")	LN811-422 (4" x 3")
Closet Flange w/ Adjustable Metal Ring (S)!
LN812-040 (4")	LN812-422 (4" x 3")
Closet Flange w/ Adjustable Plastic Ring (HUB)
LN810P-422 (4" × 3")	LN810P-040 (4" x 4")
Closet Flange w/ Adjustable Plastic Ring (Spg)
LN812P-040 (4" x 4")	LN812P-422 (4" x 3")
Closet Flange w/ Knockout & Pipe Stop (HUB)
LN815K-040 (4" x 4"/ 4" x 3")
Closet Flange w/ Knockout Test Plug (Hub)
LN800T-040 (4" x 4")	LN800T-422 (4" x 3")	LN800T-422L (4" x 3")
Closet Flange w/ Pipe Stop (HUB)
LN815PS-040 (4" x 4" / 4" x 3")
Closet Flange w/ Ring-Pull Test Plug (HUB)
LN800R-040 (4" x 4")	LN800R-422 (4" x 3")	LN800R-422L (4" x 3")
Closet Flange w/ Screw Test Plug (HUB)
LN800T-040C (4")	LN800T-422C (4" x 3")	LN800T-422CL (4" x 3")
Closet Flange, w/ Adjustable w/ PVC Plastic Ring*
LN820P-422 (4" x 3")
Combination Wye & 1/8 Bend (1 Piece)(HUBxHUBxHUB)
LN501-015 (1 1/2")	LN501-020 (2")	LN501-030 (3")	LN501-040 (4")
Combination Wye & 1/8 Bend(Two Piece)(HUBxHUBxHUB)
LN503-020 (2")
Counter Sunk Plug (MIPT)
LN106C-015 (1 1/2")	LN106C-020 (2")	LN106C-030 (3")	LN106C-040 (4")
Coupling (HUB x HUB)
LN100-012 (1 1/4")	LN100-015 (1 1/2")	LN100-020 (2")	LN100-030 (3")
LN100-040 (4")	LN100-060 (6")
Dishwasher Adapter (Sp×Barb)
LN610-015 (1-1/2")
Dishwasher Y (Hub)
LN601-209 (1-1/2" × 1-1/2" × 1/2")	LN601-210 (1-1/2" × 1-1/2" × 3/4")
Double Fixture Fitting (All HUB)
LN500-020 (2")	LN500-030 (3")	LN500-241 (2" x 1 1/2" x 1 1/2" x 1-1/2")	LN500-251 (2" x 2" x 1 1/2" x 1 1/2")
LN500-257 (2" x 1 1/2" x 2" x 2")	LN500-338 (3" x 2" x 3" x 3")
Double Sanitary Tee (All HUB)
LN428-015 (1 1/2")	LN428-020 (2")	LN428-030 (3")	LN428-040 (4")
LN429-337 (3" x 3" x 1 1/2" x 1 1/2")
Double Sanitary Tee w/ R & L Side Inlet (All HUB)
LN439-338 (3" x 3" x 3" x "3 x 2" x 2")
Double Sanitary Tee w/ Side Inlet (All HUB)
LN438-337 (3" x 3" x 3" x 3" x1 1/ 2")	LN438-338 (3" x 3" x 3" x 3" x 2")	LN438-420 (4" x 4" x 4" x 4" x 2")
Drum Trap w/ Cleanout
LN702X-363 (3" x 6" x 1 1/2")
Expansion Joint (HUB x HUB)
LNH119-015 (1 1/2")	LNH119-020 (2")	LNH119-030 (3")	LNH119-040 (4")
Expansion Joint (HUB x Spg)
LNH119S-030 (3")
Female Adapter (HUB x FIPT)
LN101-012 (1 1/4")	LN101-015 (1 1/2")	LN101-020 (2")	LN101-030 (3")
LN101-040 (4")	LN101-060 (6")
Flush Adapter (Spg x FIPT)
LN108-209 (1 1/2" x 1/2")	LN108-210 (1 1/2" x 3/4")	LN108-212 (1 1/2" x 1 1/4")	LN108-251 (2" x 1 1/2")
LN108-337 (3" x 1 1/2")	LN108-338 (3" x 2")	LN108-422 (4" x 3")
Flush Bushing (Spg x HUB)
LN107-212 (1 1/2" x 1 1/4")	LN107-251 (2" x 1 1/2")	LN107-337 (3" x 1 1/2")	LN107-338 (3" x 2")
LN107-419 (4" x 1 1/2")	LN107-420 (4" x 2")	LN107-422 (4" x 3")	LN107-532 (6" x 4")
Flush C.O. Plug (MPT)
LN110-020 (2")	LN110-030 (3")	LN110-040 (4")
Flush Closet Flange (Inside 4", Outside 3")
LN815-040 (4" x 4" / 4" x 3")
Hub Adapter Cast Iron (HUB x SJ)
LN123-020 (2")	LN123-030 (3")	LN123-040 (4")
Hub Adapter Cast Iron Increaser (HUBx SJ)
LN123R-213 (1 1/2" x 2")	LN123R-342 (3" x 4")
LA Pattern P-Trap w/Union & Plastic Nut (HUB x SJ)
LN711M-015 (1 1/2")	LN711M-212 (1 1/2" x 1 1/4")
Male Adapter (HUB x MIPT)
LN109-015 (1 1/2")	LN109-020 (2")	LN109-030 (3")	LN109-040 (4")
LN109-012 (1 1/4")	LN109-212 (1 1/2" x 1 1/4")
Male Adapter (Spg x MIPT)
LN111-012 (1 1/4")	LN111-015 (1 1/2")	LN111-020 (2")	LN111-030 (3")
LN111-040 (4")	LN111-212 (1 1/2" x 1 1/4")
No-Hub Adapter (Spg x HUB)
LN119-020 (2")	LN119-030 (3")	LN119-040 (4")	LN119-251 (2" x 1 1/2")
LN119-422 (4" x 3")
Offset Closet Flange,w/ Adjustable Metal Ring (H)
LN820-040 (4")	LN820-422 (4" x 3")
P-Trap (Hub x Hub x Cleanout)
LN707X-015 (1 1/2")	LN707X-020 (2")
P-Trap (Hub x Hub)
LN706X-015 (1 1/2")	LN706X-020 (2")	LN706X-030 (3")	LN706X-040 (4")
P-Trap w/ Union & C/O (Hub x Hub x C/O)
LN712-015 (1 1/2")
P-Trap w/ Union Joint (Hub x Hub)
LN708P-012 (1 1/4")	LN708P-015 (1 1/2")	LN708P-020 (2")
Pipe Increaser-Reducer (HUB x HUB)
LN102-212 (1 1/2" x 1 1/4")	LN102-251 (2" x 1 1/2")	LN102-337 (3" x 1-1/2")	LN102-338 (3" x 2")
LN102-419 (4" x 1 1/2")	LN102-420L (4" x 2")	LN102-422L (4" x 3")
Pivoting P-Trap w/ Plug (HUB×HUB×CLEANOUT W/PLUG)
LN707S-015 1 1/2"
Plug with Gasket (MIPT)
LN106R-012 (1 1/4")	LN106R-015 (1 1/2")	LN106R-020 (2")	LN106R-025 (2 1/2")
LN106R-030 (3")	LN106R-035 (2 1/2")	LN106R-040 (4")	LN106R-060 (6")
Red. Comb. Wye & 1/8 Bend(1 Piece)(HUBxHUBxHUB)
LN502-241 (2" x 1 1/2" x 1 1/2")	LN502-251 (2" x 2" x 1 1/2")	LN502-257 (2" x 1 1/2" x 2")	LN502-337 (3" x 3" x 1 1/2")
LN502-338 (3" x 3" x 2")	LN502-420 (4" x 4" x 2")	LN502-422 (4" x 4" x 3")
Reducing Closet Flange (Spg)
LN801-422 (4" x 3")
Reducing Coupling (HUB x HUB)
LN102-420 (4" x 2")	LN102-422 (4" x 3")
Reducing Double Sanitary Tee (All HUB)
LN429-251 (2" x 2" x 1 1/2" x 1 1/2")	LN429-323 (3" x 3" x 2" x 1 1/2")	LN429-337 (3" x 3" x 1 1/2" x 1 1/2")	LN429-338 (3" x 3" x 2" x 2")
LN429-420 (4" x 4" x 2" x 2")	LN429-422 (4" x 4" x 3" x 3")
Reducing Sanitary Tee (HUB x HUB x HUB)
LN401-212 (1 1/2" x 1 1/2" x 1 1/4")	LN401-222 (1 1/2" x 1 1/4" x 1 1/4")	LN401-225 (11/2" x 1 1/4" x 1 1/2")	LN401-241L (2" x 1 1/2" x 1 1/2")
LN401-251L (2" x 2" x 1 1/2")	LN401-257L (2" x 1 1/2" x 2")	LN401-337 (3" x 3" x 1 1/2")	LN401-338L (3" x 3" x 2")
LN401-419 (4" x 4" x 1 1/2")	LN401-420 (4" x 4" x 2")	LN401-422 (4" x 4" x 3")	LN401-532 (6" x 6" x 4")
Reducing Street Sanitary Tee (Spg x HUB x HUB)
LN404-337 (3" x 3" x 1 1/2")
Reducing Street Sanitary Tee (Spg x HUB x HUB)
LN404-241 (2" x 1 1/2" x 1 1/2")
Reducing Street Sanitary Tee (Spg x HUB x HUB)
LN404-251 (2" x 2" x 1 1/2")	LN404-257 (2" x 1 1/2" x 2")	LN404-338 (3" x 3" x 2")
Reducing Vent Tee (HUB x HUB x HUB)
LN441-337 (3" x 3" x 1 1/2")	LN441-338 (3" x 3" x 2")
Repair Coupling (HUB x HUB)
LN130-015 (1 1/2")	LN130-020 (2")	LN130-030 (3")	LN130-040 (4")
Return Bend (Hub x Hub x Cleanout w/ Plug)
LN701-xxx (1 1/2" - 12")
Return Bend (Hub x Hub)
LN700-xxx (1 1/2" - 12")
Sanitary Tee (HUB x HUB x HUB)
LN400-012 (1 1/4")	LN400-012L (1 1/4")	LN400-015 (1 1/2")	LN400-015L (1 1/2")
LN400-020 (2")	LN400-020L (2")	LN400-030 (3")	LN400-040 (4")
LN400-040L (4")	LN400-060 (6")	LN401-241 (2" x 1 1/2" x 1 1/2")	LN401-251 (2" x 2" x 1 1/2")
LN401-257 (2" x 1 1/2" x 2")	LN401-338 (3" x 3" x 2")
Sanitary Tee w/ Left Side Inlet (All HUB)
LN416-329 (3" x 3" x 2" x 2")	LN416-337 (3" x 3" x 3" x 1 1/2")	LN416-338 (3" x 3" x 3" x 2")	LN416-420 (4" x 4" x 4" x 2")
Sanitary Tee w/ Right Side Inlet (All Hub)
LN417-329 (3" x 3" x 2" x 2")	LN417-337 (3" x 3" x 3" x 1 1/2")	LN417-338 (3" x 3" x 3" x 2")	LN417-420 (4" x 4" x 4" x 2")
Sanitary Tee with R & L Side Inlets (All HUB)
LN418-337 (3" x 3" x 3" x 1 1/2" x 1 1/2")	LN418-338 (3" x 3" x 3" x 2" x 2")	LN418-420 (4" x 4" x 4" x 2" x 2")
Sewer Drain Adapter (HUB x HUB)
LN117-422 (4" x 3")
Sewer Pipe Adapter Coupling (Sewer HUBxSCH 40 HUB)
LN117S-040 (4" x 4")	LN117S-422 (4" x 3")
Slip Joint Nut (FIPT)
LN115-015 (1 1/2")
Slip Plug (Spg)
LN110S-015 (1 1/2")	LN110S-020 (2")	LN110S-025 (2 1/2")	LN110S-030 (3")
LN110S-035 (3 1/2")	LN110S-040 (4")
Snap-In Cleanout w/ Plug
LN106W-040 (4")	LN106W-030 (3")
Street Sanitary Tee (Spg x HUB x HUB)
LN403-015 (1 1/2")	LN403-020 (2")	LN403-030 (3")	LN403-040 (4")
Swivel Tray Plug (Spg x FIPT)
LN114-015 (1 1/2")
Swivel Tray Plug Adapter (HUB x FIPT)
LN112-015 (1 1/2")	LN112-212 (1 1/2" x 1 1/4")
Test Tee (HUB x HUB x Cleanout w/ Plug)
LN444X-015L (1 1/2")	LN444X-020L (2")	LN444X-030L (3")	LN444X-040L (4")
LN444X-427 (4"x 3" x 4")
Test Tee (HUB x HUB x Cleanout)
LN444X-015 (1 1/2")	LN444X-020 (2")	LN444X-030 (3")	LN444X-040 (4")
Test Tee (HUB x HUB x FIPT)
LN445-015 (1 1/2")	LN445-015L (1 1/2")	LN445-020 (2")	LN445-020L (2")
LN445-030 (3")	LN445-030L (3")	LN445-040 (4")	LN445-040L (4")
LN445-427 (4" x 3" x 4")
Threaded Cap (FIPT)
LN135-015 (1 1/2")	LN135-020 (2")	LN135-030 (3")
Trap Adapter w/ Plastic Nut & Washer (Spg x SJ)
LN103X-012 (1 1/4")	LN103X-015 (1 1/2")	LN103X-020 (2")	LN103X-212 (1 1/2" x 1-1/4")
Trap Adapter w/ Chrome Nut & Washer (HUB x SJ)
LN104C-020 (2")	LN104W-020 (2")	LN104C-212 (1 1/2" x 1 1/4")	LN104W-212 (1 1/2 x 1 1/4")
Trap Adapter w/ Chrome Nut & Washer (Spg x SJ)
LN103W-015 (1 1/2")	LN103C-020 (2")	LN103W-020 (2")	LN103C-212 (1 1/2 x 1 1/4")
LN103W-212 (1 1/2 1 1/4")
Trap Adapter w/ Plastic Nut & Washer (HUB x SJ)
LN104X-012 (1 1/4")	LN104X-015 (1 1/2")	LN104X-020 (2")	LN104X-212 (1 1/2 x 1 1/4")
Trap Adapter w/ Plastic Nut (HUB x SJ)
LN104P-012 (1 1/4")	LN104P-015 (1 1/2")	LN104P-212 (1 1/2" x 1 1/4")
Trap Adapter w/ Plastic Nut (Spg x SJ)
LN103P-012 (1 1/4")	LN103P-015 (1 1/2")	LN103P-212 (1 1/2" x 1 1/4")
Trap Adapter-Female (Hub x SJ) (without nut)
LN104-xxx (1 1/4" - 2")
Trap Adapter-Male (Spg x SJ) (without nut)
LN103-xxx (1 1/4" - 2")
Tray Plug Adapter (Spigot x Female NPSM)
LN113-015 (1 1/2")
Tray Plug Adapter - Spigot
LN130X-015 (1 1/2")	LN900-015 (1 1/2")
Two-Way Cleanout (HUB x HUB x HUB)
LN448-040 (4")	LN448-030 (3")
Union (HUB x HUB)
LN126-015 (1 1/2")	LN126-020 (2")	LN126-030 (3")	LN126-040 (4")
Vent Tee (HUB x HUB x HUB)
LN441-015 (1 1/2")	LN441-020 (2")	LN441-030 (3")	LN441-040 (4")
! Epoxy coated * 1 1/2" Offset ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Figure numbers may have one of the following optional prefixes used to identify retail packaging requirements: URP, U, UTP, USP, UPP, UP, UMP, UHP, UBP, PP, MPP, RP, MRP, RLN, LN, RS, MRR, RL, CPRLN, or RLR.
Fittings# ¢ [3] [4]	MLTPL	Viterra	CSA B181.2
1/4 Bend (H x FIPT)
1 1/4" - 8" (LP301-xxx)
1/4 Bend (H x H)
1 1/4" (LP300-012)
1/4 Bend w/ High Heel Inlet (All HUB)
3" x 3" x 1 1/2" (LP303H-337)
1/4 Bend w/ High Heel Inlet (All HUB)
3" x 3" x 2" (LP303H-338)
1/4 Bend with Side Inlet (ALL HUB)
3" x 3" x 1 1/2" (LP300S-337)
1/4 Bend, Reducing (H x H)
1 1/4" - 12" (LP300R-xxx)
1/4 Bend, Street (S x H)
1 1/4" (LP302-012)
1/8 Bend (H x H)
1 1/4" (LP321-012)
1/8 Bend, Street (H x S)
1 1/4" (LP323-012)
11-1/4° Elbow (H x H)
1 1/4" - 12" (LP305-xxx)
11-1/4° Elbow (S x H)
1 1/4" - 12" (LP306-xxx)
22.5° Elbow-Short Turn (H x H)
1 1/4" - 12" (LP324-xxxS)
45° Elbow-Short Turn (H x H)
1 1/4" - 12" (LP321-xxxS)
45° Elbow-Short Turn (H x S)
1 1/4" - 12" (LP323-xxxS)
90° Elbow-Short Turn (H x H)
1 1/4" - 12" (LP300-xxxS)
90° Elbow-Short Turn (H x S)
1 1/4" -12" (LP302-xxxS)
Adapter Coupling (S/D SxDWV H)
4" x 3" (LP117X-422)
Adapter, Schedule 40 to Schedule 30 (H x H)
3" (LP117S-030)
Adapter, Soil Pipe (H x H)
2" - 4" (LP125-xxx)
Adapter, Tail Piece w/ Plastic Nut (S x SLIP)
1 1/2" x 1 1/2" (LP704P-015)
Adapter, Tail Piece w/ Plastic Nut (S x SLIP)
1 1/2" x 1 1/4" (LP704P-212)
Adjustable P-Trap w/ Plastic Nut (H x H)
1 1/4" (LP708P-012)
Cleanout Plug (MPT)
1 1/4" (LP106-012)
Cleanout Plug w/ Gasket (MPT)
1 1/4" - 12" (LP106R-xxx)
Closet Bend Street, Reducing w/ Test Cap (S x H)
3" x 4" (LP330X-342)
Closet Flange (FPT)
4" x 3" (LP830-422)
Closet Flange (MPT)
4" x 3" (LP831-422)
Closet Flange w/ Adjustable Metal Ring (H)!
4" (LP811-040)	4" x 3" (LP811-422)
Closet Flange w/ Adjustable Metal Ring (S)!
4" (LP812-040)	4" x 3" (LP812-422)
Closet Flange w/ Adjustable Plastic Ring (H)
4" (LP810-040)
Closet Flange w/ Adjustable Plastic Ring (S)
4" (LP812P-040)	4" x 3" (LP812P-422)
Closet Flange w/ Stop (H)
4" x 3" (LP800S-422)
Closet Flange w/ Test Plate (H)
4" (LP800T-040)	4" x 3" (LP800T-422)
Closet Flange, w/ Stop, Adj w/ Plastic Ring (H)
4" x 3" (LP810S-422)
Combination Wye and 1/8 Bend (One Piece) (All HUB)
1 1/4" - 12" (LP501-xxx)
Combination Wye and 1/8 Bend (Two Piece) (All HUB)
1 1/4" - 12" (LP503-xxx)
Combination Wye and 1/8 Bend Double Assembly(H)
1 1/4" - 12" (LP507-xxx)
Combination Wye and 1/8 Bend w/Left Side Inlet (H)
3" x 3" x 3"x 2" (LP515-338)
Combination Wye and 1/8 Bend w/Right Side Inlet(H)
3" x 3" x 3" x 2" (LP516-338)
Combo Wye and 1/8 Bend, Reducing (One Pc)(All HUB)
1 1/4" - 12" (LP502-xxx)
Combo Wye and 1/8 Bend, Reducing (Two Pc)(All HUB)
1 1/4" - 12" (LP504-xxx)
Coupling (H x H)
1 1/4" (LP100-012)
Dishwasher Wye (H x H x Hose Barb)
1 1/2" x 1 1/2" x 1/2" (LP601-209)
Double Sanitary Tee w/ R & L Side Inlets (All HUB)
3" x 3" x 3" x 3" x 2" x 2" (LP439-338)	4" x 4" x 4" x 4" x 2" x 2" (LP439-420)
Double Sanitary Tee w/ Side Inlet (All HUB)
3" x 3" x 3" x 3" x 1 1/2" (LP438-337)	3" x 3" x 3" x 3" x 2" (LP438-338)	4" x 4" x 4" x 4" x 2" (LP438-420)
Double Sanitary Tee, Reducing (ALL HUB)
3" x 3" x 2" x 1 1/2" (LP429-323)
Double Sanitary Tee, Street, Reducing (SxHxHxH)
3" x 3" x 2" x 2" (LP431-338)
Double Wye, w/ 2" Side Inlet (ALL HUB)
3" x 3" x 3" x 3" x 2" (LP611S-030)	4" x 4" x 4" x 4"x 2" (LP611S-040)
Drum Trap w/ Cleanout (H x H)
1 1/2" x 3" x 6" (LP720-015)
Female Adapter (FPT x H)
1 1/4" (LP101-012)
Fitting Cleanout Adapter (S x FPT)
1 1/4" (LP105-012)
Fitting Cleanout Adapter w/ C.O. Plug (S x FPT)
1 1/4" (LP105X-012)
Flush Bushing (S x H)
1 1/2" x 1 1/4" (LP107-212)	2" x 1 1/4" (LP107-250)
Flush C.O. Plug (MPT)
1 1/4" - 8" (LP110-xxx)
Flush C.O. Tee w/ C.O. Plug (H x H x FPT)
1 1/4" - 8" (LP445X-xxx)
Flush Closet Flange w/ Out Pipe Stop$
4" x 4"/4" x 3" (LP817-040)
Flush Closet Flange w/ Pipe Stop$
4" x 4"/4" x 3" (LP816-040)
Flush Closet Flange w/ Pipe Stop & Knockout$
4" x 4"/4" x 3" (LP818-040)
Horizontal Twin Tee (All HUB)
3" x 3" x 1 1/2" x 1 1/2" (LP447-337)
Hub Adapter, Cast Iron, Increaser (CI SxDWV H)
2" x 1 1/2" (LP123R-251)	3" x 1 1/2" (LP123R-337)	3" x 2" (LP123R-338)	4" x 3" (LP123R-422)
L.A. Pattern P-Trap (SLIP x H)%
1 1/2" (LP711X-015)	1 1/2" x 1 1/4" (LP711X-212)
Long Sweep 1/4 Bend w/ High Heel Inlet (All HUB)
3" x 3" x 1 1/2" (LP308-337)	3" x 3" x 2" (LP308-338)
Long Sweep 1/4 Bend w/ Side Inlet (All HUB)
3" x 3" x 2" (LP311-338)
Male Adapter (MPT x H)
1 1/4" (LP109-012)	1 1/4" x 1 1/2" (LP109-169)
Offset Closet Flange, w/Adjustable Metal Ring (H)!
4" x 3" (LP820-422)
P-Trap (H x SLIP)
1-1/4" - 2" (LP713-xxx)
P-Trap w/union Joint (H x FPT)
1 1/4" - 12" (LP709-xxx)
Pipe Increaser-Reducer (H × H)
1 1/2" × 1 1/4" (LP102-212)
Plug Slip (S)
1 1/4" - 12" (LP110S-xxx)
Reducer Bushing (Dishwasher Bushing) (S x FPT)
1 1/4" - 12" (LP108-xxx)
Reducing Female Adapter (H x FPT)
1 1/2" x 1 1/4" (LP101-212)
Reducing Sanitary Tee (ALL HUB)
1 1/2" x 1 1/2" x 1 1/4" (LP401-212)
Reducing Wye (ALL HUB)
6" - 12" (LP601-xxx)
Sanitary Tee (ALL HUB)
1 1/4" (LP400-012)
Sanitary Tee, Street (S x H x H)
1 1/4" - 12" (LP403-xxx)
Sanitary Tee, Street, Reducing (S x H x H)
1 1/4" - 12" (LP404-xxx)
Spigot Adapter, Cast Iron (CI H x DWV H)
1 1/4" - 12" (LP122-xxx)
Threaded Cap (FPT)
1 1/4" - 8" (LP135-xxx)
Trap Adapter - Female (H x SLIP)
1 1/4" - 2" (LP104-xxx)
Trap Adapter - Female w/ Brass Nut (H x SLIP)
1 1/2" x 1 1/4" (LP104B-212)
Trap Adapter - Female w/ Plastic Nut (H x SLIP)
1 1/4" (LP104P-012)	2" (LP104P-020)
Trap Adapter - Male (S x SLIP)
1 1/4" - 2" (LP103-xxx)
Trap Adapter Plug (H x NPSM Thread)
1 1/2" (LP128-015)
Trap Adapter Plug (S x NPSM Thread)
1 1/2" (LP129-015)
Trap Adapter-Female w/Chrome Nut & Washer(HxSLIP)
1 1/2" (LP104W-015)	1 1/2" x 1 1/4" (LP104W-212)	2" (LP104W-020)
Trap Adapter-Female w/Plastic Nut & Washer(HxSLIP)
1 1/4" (LP104X-012)	1 - 1/2" (LP104X-015)	1 - 1/2 x 1 - 1/4" (LP104X-212)	2" (LP104X-020)
Trap Adapter-Male w/Chrome Nut & Washer (S x SLIP)
1 1/4" - 2" (LP103W-xxx)
Trap Adapter-Male w/Plastic Nut & Washer(S x SLIP)
1 1/4" - 2" (LP103X-xxx)
Trap Adapter-Male w/Plastic Nut (S x SLIP)
1 1/4" - 2" (LP103P-xxx)
Trap Adapter-Male w/Plastic Nut (S x SLIP)@
1 1/4" - 2" (LP103R-xxx)
Trap Elbow (for use with Traps only) (H x S)
1 1/4" - 12" (LP335-xxx)
Tube End Cleanout (H x FPT)
1 1/4" -12" (LP905-xxx)
Tube End Cleanout (H x Gasket Plug)
1 1/4" - 12" (LP905X-xxx)
Vent Ell (H x H)
1 1/4" (LP331-012)
Vent Ell, Street (H x S)
1 1/4" (LP333-012)
Washer Box P-Trap (H x H)
2" (LP716-020)
Wye (ALL HUB)
1 1/4" (LP600-012)
Wye w/ Left Side Inlet (All HUB)
3" x 3" x 3" x 2" (LP625-338)	4" x 4" x 4" x 2" (LP625-420)
Wye w/ Right Side Inlet (All HUB)
3" x 3" x 3" x 2" (LP626-338)	4" x 4" x 4" x 2" (LP626-420)
Wye, Street (S x H x H)
1 1/4" - 12" (LP602-xxx)
Wye, Street, Reducing (S x H x H)
1 1/4" - 12" (LP603-xxx)
! Epoxy coated $ Fits inside 4" DWV pipe or over 3" pipe % With chrome nut, with chrome nut and washer @ 1 1/2” & 1 1/4" washers # This product may be marked with an alternate trade name: Liansu. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [3] Product is authorized to bear the cNSF and/or the cNSFus Mark except for 1/4, 3/8, 3-1/2 and 5 in. fittings. [4] Figure numbers may have the following prefix used to identify retail packaging requirements: R
Fittings# ¢ [2] [4]	PVC	Viterra	CSA B181.2
(LP104R-015) 1 1/2" x 1 1/2" x 1 1/2" x 1 1/4"
1-1/2" Trap Adapter-Female w/1-1/2 Plastic Nut & Washer	And 1-1/2×1-1/4 Washer(H×SLIP)
1/16 Bend (H x H)
1 1/2" - 12" (LP324-xxx)
1/16 Bend, Street (H x S)
1 1/2" - 12" (LP326-xxx)
1/4 Bend (H x H)
1 1/2" - 12" (LP300-xxx)
1/4 Bend w/ Low Heel Inlet (H x H x H)
1 1/2" - 12" (LP303-xxx)
1/4 Bend with Side Inlet (ALL HUB)
3" x 3" x 2" (LP300S-xxx)
1/4 Bend, Street (S x H)
1 1/2" - 12" (LP302-xxx)
1/4 Bend, Street w/ Low Heel Inlet (H x S x H)
1 1/2" - 12" (LP310-xxx)
1/6 Bend (H x H)
1 1/2" - 12" (LP319-xxx)
1/6 Bend, Street (H x S)
1 1/2" - 12" (LP320-xxx)
1/8 Bend (H x H)
1 1/2" - 12" (LP321-xxx)
1/8 Bend, Street (H x S)
1 1/2" - 12" (LP323-xxx)
2-Way Cleanout (ALL HUB)
1 1/2" - 12" (LP448-xxx)
Adapter Bushing (DWV SPIGOT x HUB)
1 1/2" - 12" (LP118-xxx)
Adapter Coupling (H x H)
1 1/2" - 12" (LP117-xxx)
Adjustable P-Trap w/ Plastic Nut (H x H)
1 1/2" - 2" (LP708P-xxx)
Cap (SOC)
1 1/2" - 12" (LP116-xxx)
Cleanout Plug (MPT)
1 1/2" - 12" (LP106-xxx)
Cleanout Tee w/ C.O. Plug (H x H)
1 1/2" - 12" (LP444X-xxx)
Closet Bend, Reducing (H x H)
3" x 4" (LP329-xxx)
Closet Bend, Street, Reducing (H x S)
3" x 4" (LP330-xxx)
Closet Flange (H)
1 1/2" - 12" (LP800-xxx)
Closet Flange, Reducing (SPIGOT)
1 1/2" - 12" (LP801-xxx)
Coupling (H x H)
1 1/2" - 12" (LP100-xxx)
Double 1/4 Bend (H x H x H)
1 1/2" - 4"(LP327-xxx)
Double Fixture Fitting (ALL HUB)
1 1/2" - 12" (LP500-xxx)
Double Sanitary Tee (ALL HUB)
1 1/2" - 12" (LP428-xxx)
Double Sanitary Tee, Reducing (ALL HUB)
(LP429-xxx)	2" x 2" x 1 1/2" x 1 1/2"	3" x 3" x 1 1/2" x 1 1/2"	3" x 3" x 2" x 2"
4" x 4" x 1 1/2" x 1 1/2"	4" x 4" x 2" x 2"	4" x 4" x 3" x 3"	6" x 6" x 2" x 2"
6" x 6" x 3" x 3"	6" x 6" x 4" x 4"	8" x 8" x 2" x 2"	8" x 8" x 3" x 3"
8" x 8" x 4" x 4"	8" x 8" x 6" x 6"	10" x 10" x 2" x 2"	10" x 10" x 3" x 3"
10" x 10" x 4" x 4"	10" x 10" x 6" x 6"	10" x 10" x 8" x 8"	12" x 12" x 2" x 2"
12" x 12" x 3" x 3"	12" x 12" x 4" x 4"	12" x 12" x 6" x 6"	12" x 12" x 8" x 8"
12" x 12" x 10" x 10"
Double Wye (ALL HUB)
1 1/2" - 12" (LP611-xxx)
Female Adapter (FPT x H)
1 1/2" - 12" (LP101-xxx)
Fitting Cleanout Adapter (S x FPT)
1 1/2" - 12" (LP105-xxx)
Fitting Cleanout Adapter w/ C.O. Plug (S x FPT)
1 1/2" - 12" (LP105X-xxx)
Flush Bushing (S x H)
1 1/2" - 12" (LP107-xxx)
Flush C.O. Tee (H x H x FPT)
1 1/2" - 12" (LP445-xxx)
Flush Closet Flange
1 1/2" - 12" (LP815-xxx)
Hub Adapter (H x S)
2" - 4" (LP123-xxx)
L.A. Pattern P-Trap, w/ Union Joint (SLIP x H)
(LP711P-xxx)	(LP711P-xxx) (SLIP x H w/ Plastic Nut & Washer)	1 1/4" x 1 1/2"	1 1/2"
Long Sweep 1/4 Bend (H x H)
1 1/2" - 12" (LP304-xxx)
Long Sweep 1/4 Bend w/Low Heel Inlet (All HUB)
1 1/2" - 12" (LP307-xxx)
Long Sweep 1/4 Bend, Street (H x S)
1 1/2" - 12" (LP309-xxx)
Male Adapter (MPT x H)
1 1/2" - 12" (LP109-xxx)
No-Hub Adapter (S x H)
1 1/2" - 12" (LP119-xxx)
P-Trap (H x H)
1 1/2" - 12" (LP706X-xxx)
P-Trap w/ Cleanout (H x H)
1 1/2" - 12" (LP707X-xxx)
P-Trap, Low Profile (H x H)
1 1/4" - 12" (LP710-xxx)
Pipe Increaser - Reducer (H x H)
(LP102-xxx)	2" x 1 1/2"	3" x 1 1/2"	3" x 2"
4" x 1 1/2"	4" x 2"	4" x 3"	6" x 2"
6" x 3"	6" x 4"	8" x 4"	8" x 6"
10" x 4"	10" x 6"	10" x 8"	12" x 2"
12" x 3"	12" x 4"	12" x 6"	12" x 8"
12" x 10"
Reducing Double Wye (ALL HUB)
(LP612-xxx)	2" x 2" x 1 1/2" x 1 1/2"	3" x 3" x 1 1/2" x 1 1/2"	3" x 3" x 2" x 2"
4" x 4" x 2" x 2"	4" x 4" x 3" x 3"	6" x 6" x 2" x 2"	6" x 6" x 3" x 3"
6" x 6" x 4" x 4"	8" x 8" x 2" x 2"	8" x 8" x 3" x 3"	8" x 8" x 4" x 4"
8" x 8" x 6" x 6"	10" x 10" x 2" x 2"	10" x 10" x 3" x 3"	10" x 10" x 4" x 4"
10" x 10" x 6" x 6"	10" x 10" x 8" x 8"	12" x 12" x 2" x 2"	12" x 12" x 3" x 3"
12" x 12" x 4" x 4"	12" x 12" x 6" x 6"	12" x 12" x 8" x 8"	12" x 12" x 10" x 10"
Reducing Sanitary Tee (ALL HUB)
(LP401-xxx)	2" x 1 1/2" x 1 1/2"	2" x 2" x 1 1/2"	2" x 1 1/2" x 2"
3" x 3" x 1 1/2"	3" x 3" x 2"	4" x 4" x 1 1/2"	4" x 4" x 2"
4" x 4" x 3"	6" x 6" x 2"	6" x 6" x 3"	6" x 6" x 4"
8" x 8" x 2"	8" x 8" x 3"	8" x 8" x 4"	8" x 8" x 6"
10" x 10" x 2"	10" x 10" x 3"	10" x 10" x 4"	10" x 10" x 6"
10" x 10" x 8"	12" x 12" x 2"	12" x 12" x 3"	12" x 12" x 4"
12" x 12" x 6"	12" x 12" x 8"	12" x 12" x 10"
Reducing Wye (ALL HUB)
(LP601-xxx)	2" x 1 1/2" x 1 1/2"	2" x 2" x 1 1/2"	2 x 1 1/2" x 2"
3" x 3" x 1 1/2"	3" x 3" x 2"	4" x 4" x 1 1/2"	4" x 4" x 2"
4" x 4" x 3"	6" x 6" x 2"	6" x 6" x 3"
Repair Coupling (H x H)
1 1/2" - 12" (LP130-xxx)
Return Bend (H x H)
1 1/2" - 12" (LP700-xxx)
Sanitary Tee (ALL HUB)
1 1/2" - 12" (LP400-xxx)
Sanitary Tee w/ Left Side Inlet (ALL HUB)
1 1/2" - 12" (LP416-xxx)
Sanitary Tee w/ R & L Side Inlets (ALL HUB)
1 1/2" - 12" (LP418-xxx)
Sanitary Tee w/ Right Side Inlet (ALL HUB)
1 1/2" - 12" (LP417-xxx)
Trap Adapter - Female w/Plastic Nut (H x SLIP)
(LP104P-xxx)	1 1/2" x 1 1/4"	1 1/2"
Vent Ell (H x H)
1 1/2" - 12" (LP331-xxx)
Vent Ell, Street (H x S)
1 1/2" - 12" (LP333-xxx)
Vent Tee (ALL HUB)
1 1/2" - 12" (LP441-xxx)
Wye (ALL HUB)
1 1/2" - 12" (LP600-xxx)
# This product may be marked with an alternate trade name: Liansu. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [2] XXX - size 012 - 1 1/4" 015 - 1 1/2" 020 - 2" 030 - 3" 040 - 4" 060 - 6" 080 - 8" 100 - 10" 120 - 12" 169 - 1 1/4" x 1 1/2" 212 - 1 1/2" x 1 1/4" 213 - 1 1/2" x 2" 241 - 2" × 1 1/2" × 1 1/2" or 2" × 1 1/2" × 1 1/2" × 1 1/2" 251 - 2" × 1 1/2" or 2" × 2" × 1 1/2" × 1 1/2" 253 - 2" x 3" 337 - 3" × 1 1/2" or 3" × 3" × 1 1/2" or 3" × 3" × 3" × 1 1/2" 338 - 3" × 2" or3" × 3" × 2" or 3" × 3" × 3" × 2" 342 - 3" x 4" 415 - 4" × 4" × 1/2" 420 - 4" × 2" or 4" × 4" × 2" or 4" × 4" × 4" × 2" 422 - 4" × 3" or 4" × 4" × 3" or 4" × 4" × 4" × 3" 532 - 6" × 4" or 6" × 6" × 4" or 6" × 6" × 6" × 4" 582 - 8" × 4" or 8" × 8" × 4" or 8" × 8" × 8" × 4" 585 - 8" × 6" or 8" × 8" × 6" or 8" × 8" × 8" × 6" 626 - 10" × 6" or 10" × 10" × 6" or 10" × 10" × 10" × 6" 628 - 10" × 8" or 10" × 10" × 8" or 10" × 10" × 10" × 8" 670 - 12" × 10" or 12" × 12" × 10" or 12" × 12" × 12" × 10" [4] Figure numbers may have the following prefix used to identify retail packaging requirements: R
Fittings# ¢ [2] [4]	PVC	Viterra	CSA B181.2
Closet Flange w/ Adjustable Plastic Ring (H)
LP810P-040 (4")
Closet Flange, w/ Adjustable w/ PVC Plastic Ring
LP820P-422 (4" x 3")
Closet Flange, w/ Stop, Adj w/ Plastic Ring (H)
LP810S-342 (3" x 4")	LP810S-040 (4")
Flush Adapter (S x FPT)
LP111-212 (1 1/2" x 1 1/4")	LP111-251 (2" x 1 1/2")	LP111-337 (3" x 1 1/2")	LP111-338 (3" x 2")
Flush Closet Flange w/ Pipe Stop & Knockout$
LP816KO-040 (4" x 4"/4" x 3")
Hub Adapter (H x S)
LP123-213 (1 1/2" x 2")	LP123-253 (2" x 3")	LP123-342 (3" x 4")
Offset Closet Flange,w/ Adjustable Metal Ring (H)!
LP820-040 (4")
Reducing Sanitary Tee (All Hub)
LP401-415 (4" x 4" x 3")
Threaded Cap (FPT)
LP135-012 (1 1/4")
Trap Adapter Cap (FPT)
LP112-012 (1 1/4")	LP112-015 (1 1/2")	LP112-020 (2")
Trap Adapter Cap B (FPT)
LP113-012 (1 1/4")	LP113-015 (1 1/2")	LP113-020 (2")
Trap Adapter Cap w/ Gasket
LP114-012 (1 1/4")	LP114-015 (1 1/2")	LP114-020 (2")
Trap Adapter Gasket
LP113R-012 (1 1/4")	LP113R-015 (1 1/2")	LP113R-020 (2")
Trap Adapter-Male (S x SLIP)
LP103-030 (3")
Trap Adapter-Male w/Chrome Nut & Washer (S x SLIP)
LP103W-212 (1 1/2" x 1 1/4")
$ Fits inside 4" DWV pipe or over 3" pipe ! Epoxy coated # This product may be marked with an alternate trade name: Liansu. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [2] XXX - size 012 - 1 1/4" 015 - 1 1/2" 020 - 2" 030 - 3" 040 - 4" 060 - 6" 080 - 8" 100 - 10" 120 - 12" 169 - 1 1/4" x 1 1/2" 212 - 1 1/2" x 1 1/4" 213 - 1 1/2" x 2" 241 - 2" × 1 1/2" × 1 1/2" or 2" × 1 1/2" × 1 1/2" × 1 1/2" 251 - 2" × 1 1/2" or 2" × 2" × 1 1/2" × 1 1/2" 253 - 2" x 3" 337 - 3" × 1 1/2" or 3" × 3" × 1 1/2" or 3" × 3" × 3" × 1 1/2" 338 - 3" × 2" or3" × 3" × 2" or 3" × 3" × 3" × 2" 342 - 3" x 4" 415 - 4" × 4" × 1/2" 420 - 4" × 2" or 4" × 4" × 2" or 4" × 4" × 4" × 2" 422 - 4" × 3" or 4" × 4" × 3" or 4" × 4" × 4" × 3" 532 - 6" × 4" or 6" × 6" × 4" or 6" × 6" × 6" × 4" 582 - 8" × 4" or 8" × 8" × 4" or 8" × 8" × 8" × 4" 585 - 8" × 6" or 8" × 8" × 6" or 8" × 8" × 8" × 6" 626 - 10" × 6" or 10" × 10" × 6" or 10" × 10" × 10" × 6" 628 - 10" × 8" or 10" × 10" × 8" or 10" × 10" × 10" × 8" 670 - 12" × 10" or 12" × 12" × 10" or 12" × 12" × 12" × 10" [4] Figure numbers may have the following prefix used to identify retail packaging requirements: R
Fittings§ [1]	ABS	Viterra	*SE 7992*
90° Elbow With Side Inlet (HUB x HUB x HUB)
LN300S-337 (3" x 3" x 1 1/2")
Dishwasher Adapter (Sp×Barb)
LN610-015 (1-1/2")
Dishwasher Y (Hub)
LN601-209 (1-1/2" × 1-1/2" × 1/2")	LN601-210 (1-1/2" × 1-1/2" × 3/4")
Expansion Joint (HUB x HUB)
LNH119-015 (1 1/2")	LNH119-020 (2")	LNH119-030 (3")	LNH119-040 (4")
Expansion Joint (HUB x Spg)
LNH119S-030 (3")
Hub Adapter Cast Iron (HUB x SJ)
LN123-020 (2")	LN123-030 (3")	LN123-040 (4")
Hub Adapter Cast Iron Increaser (HUB x SJ)
LN123R-213 (1 1/2" x 2")	LN123R-342 (3" x 4")
P-Trap (Hub x Hub x Cleanout w/ Plug)
LN707X-015 (1 1/2")	LN707X-020 (2")
P-Trap w/ Union & C/O (Hub x Hub x C/O)
LN712-015 (1 1/2")
Pivoting P-Trap w/ Plug (HUB×HUB×CLEANOUT W/PLUG)
LN707S-015 1 1/2"
Plug With Gasket (MIPT)
LN106R-025 (2 1/2")	LN106R-035 (2 1/2")	LN106R-060 (6")
Return Bend (Hub x Hub x Cleanout w/ Plug)
LN701-xxx (1 1/2" - 12")
Tray Plug Adapter - Spigot
LN130X-015 (1 1/2")
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Figure numbers may have one of the following optional prefixes used to identify retail packaging requirements: URP, U, UTP, USP, UPP, UP, UMP, UHP, UBP, PP, MPP, RP, MRP, RLN, LN, RS, MRR, RL, CPRLN, or RLR.
Fittings§ [1]	ABS	Viterra	*SE 7992*
90° Elbow w/ Side Inlet (HUB x HUB x HUB)
LN300S-338 (3" x 3" x 2")
ABS-Copper Adapter (HUB x SJ)
LN120-015 (1 1/2")	LN120-212 (1 1/2" x 1 1/4")
Cap (FIPT)
LN116F-015 (1 1/2")
Cleanout Wye (HUB x HUB x FIPT)
LN604-015 (1 1/2")
Drum Trap w/ Cleanout
LN702X-363 (3" x 6" x 1 1/2")
LA Pattern P-Trap w/Union & Plastic Nut (HUB x SJ)
LN711M-015 (1 1/2")	LN711M-212 (1 1/2" x 1 1/4")
P-Trap (HUB x HUB x Cleanout)
LN707X-015 (1-1/2")	LN707X-020 (2")
P-Trap w/ Union Joint (Hub x Hub)
LN708P-020 (2")
Pipe Increaser-Reducer (HUB x HUB)
LN102-419 (4" x 1 1/2")
Plug with Gasket (MIPT)
LN106R-012 (1 1/4")	LN106R-015 (1 1/2")	LN106R-020 (2")	LN106R-030 (3")
LN106R-040 (4")
Repair Coupling (HUB x HUB)
LN130-015 (1 1/2")	LN130-020 (2")	LN130-030 (3")	LN130-040 (4")
Sewer Pipe Adapter Coupling (Sewer HUBxSCH 40 HUB)
LN117S-040 (4" x 4")	LN117S-422 (4" x 3")
Slip Joint Nut (FIPT)
LN115-015 (1 1/2")
Snap-In Cleanout w/ Plug
LN106W-030 (3")	LN106W-040 (4")
Test Tee (HUB x HUB x Cleanout w/ Plug)
LN444X-427 (4" x 3" x 4")
Test Tee (HUB x HUB x FIPT)
LN445-427 (4" x 3" x 4")
Tray Plug Adapter
LN900-015 (1 1/2")
Union (HUB x HUB)
LN126-015 (1 1/2")	LN126-020 (2")	LN126-030 (3")	LN126-040 (4")
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Figure numbers may have one of the following optional prefixes used to identify retail packaging requirements: URP, U, UTP, USP, UPP, UP, UMP, UHP, UBP, PP, MPP, RP, MRP, RLN, LN, RS, MRR, RL, CPRLN, or RLR.
Fittings# § [2] [4]	PVC	Viterra	*SE 7992*
1/4 Bend with Side Inlet (ALL HUB)
3" x 3" x 2" (LP300S-xxx)
2-Way Cleanout (ALL HUB)
1 1/4" (LP448-xxx)	1 1/2" (LP448-xxx)	2" (LP448-xxx)	8" (LP448-xxx)
10" (LP448-xxx)	12" (LP448-xxx)
Double Sanitary Tee, Reducing (ALL HUB)
LP429-xxx	6" x 6" x 2" x 2"	8" x 8" x 2" x 2"	8" x 8" x 3" x 3"
10" x 10" x 2" x 2"	10" x 10" x 3" x 3"	10" x 10" x 4" x 4"	10" x 10" x 6" x 6"
10" x 10" x 8" x 8"	12" x 12" x 2" x 2"	12" x 12" x 3" x 3"	12" x 12" x 4" x 4"
12" x 12" x 6" x 6"	12" x 12" x 8" x 8"	12" x 12" x 10" x 10"
Flush Adapter (S x FPT)
LP111-212 (1 1/2" x 1 1/4" )	LP111-251 (2" x 1 1/2")	LP111-337 (3" x 1 1/2")	LP111-338 (3" x 2")
Flush Closet Flange w/ Pipe Stop & Knockout$
LP816KO-040 (4" x 4"/4" x 3")
L.A. Pattern P-Trap, w/ Union Joint (SLIP x H)
(LP711P-xxx)	1 1/4" SLIP Washers, w/ Plastic Nut (SLIP x H)	1 1/4" x 1 1/2"	1 1/2"
Pipe Increaser - Reducer (H x H)
(LP102-xxx)	4" x 1 1/2"	6" x 2"	12" x 2"
12" x 3"	12" x 4"
Reducing Double Wye (ALL HUB)
(LP612-xxx)	6" x 6" x 2" x 2"	8" x 8" x 2" x 2"	8" x 8" x 3" x 3"
10" x 10" x 2" x 2"	10" x 10" x 3" x 3"	12" x 12" x 2" x 2"	12" x 12" x 3" x 3"
Reducing Sanitary Tee (ALL HUB)
(LP401-xxx)	6" x 6" x 2"	8" x 8" x 2"	8" x 8" x 3"
10" x 10" x 2"	10" x 10" x 3"	10" x 10" x 4"	10" x 10" x 6"
10" x 10" x 8"	12" x 12" x 2"	12" x 12" x 3"	12" x 12" x 4"
12" x 12" x 6"	12" x 12" x 8"	12" x 12" x 10"
Vent Ell, Street (H x S)
6" - 12" (LP333-xxx)
$ Fits inside 4" DWV pipe or over 3" pipe # This product may be marked with an alternate trade name: Liansu. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [2] XXX - size 012 - 1 1/4" 015 - 1 1/2" 020 - 2" 030 - 3" 040 - 4" 060 - 6" 080 - 8" 100 - 10" 120 - 12" 169 - 1 1/4" x 1 1/2" 212 - 1 1/2" x 1 1/4" 213 - 1 1/2" x 2" 241 - 2" × 1 1/2" × 1 1/2" or 2" × 1 1/2" × 1 1/2" × 1 1/2" 251 - 2" × 1 1/2" or 2" × 2" × 1 1/2" × 1 1/2" 253 - 2" x 3" 337 - 3" × 1 1/2" or 3" × 3" × 1 1/2" or 3" × 3" × 3" × 1 1/2" 338 - 3" × 2" or3" × 3" × 2" or 3" × 3" × 3" × 2" 342 - 3" x 4" 415 - 4" × 4" × 1/2" 420 - 4" × 2" or 4" × 4" × 2" or 4" × 4" × 4" × 2" 422 - 4" × 3" or 4" × 4" × 3" or 4" × 4" × 4" × 3" 532 - 6" × 4" or 6" × 6" × 4" or 6" × 6" × 6" × 4" 582 - 8" × 4" or 8" × 8" × 4" or 8" × 8" × 8" × 4" 585 - 8" × 6" or 8" × 8" × 6" or 8" × 8" × 8" × 6" 626 - 10" × 6" or 10" × 10" × 6" or 10" × 10" × 10" × 6" 628 - 10" × 8" or 10" × 10" × 8" or 10" × 10" × 10" × 8" 670 - 12" × 10" or 12" × 12" × 10" or 12" × 12" × 12" × 10" [4] Figure numbers may have the following prefix used to identify retail packaging requirements: R
Fittings# § [3] [4]	PVC	Viterra	*SE 7992*
1/4 Bend w/ High Heel Inlet (All HUB)
3" x 3" x 2" (LP303H-338)
1/4 Bend w/ High Heel Inlet (All HUB)
3" x 3" x 1 1/2" (LP303H-337)
1/4 Bend with Side Inlet (ALL HUB)
3" x 3" x 1 1/2" (LP300S-337)
1/4 Bend, Reducing (H x H)
1 1/4" - 12" (LP300R-xxx)
Adapter, Schedule 40 to Schedule 30 (H x H)
3" (LP117S-030)
Adapter, Tail Piece w/ Plastic Nut (S x SLIP)
1 1/2" x 1 1/4" (LP704P-212)
Adapter, Tail Piece w/ Plastic Nut (S x SLIP)
1 1/2" x 1 1/2" (LP704P-015)
Cleanout Plug w/ Gasket (MPT)
1 1/4" - 12" (LP106R-xxx)
Combination Wye and 1/8 Bend w/Left Side Inlet (H)
3" x 3" x 3"x 2" (LP515-338)
Combination Wye and 1/8 Bend w/Right Side Inlet(H)
3" x 3" x 3" x 2" (LP516-338)
Double Wye, w/ 2" Side Inlet (ALL HUB)
3" x 3" x 3" x 3" x 2" (LP611S-030)	4" x 4" x 4" x 4"x 2" (LP611S-040)
Drum Trap w/ Cleanout (H x H)
1 1/2" x 3" x 6" (LP720-015)
Flush Closet Flange w/ Out Pipe Stop$
4" x 4"/4" x 3" (LP817-040)
Flush Closet Flange w/ Pipe Stop$
4" x 4"/4" x 3" (LP816-040)
Flush Closet Flange w/ Pipe Stop & Knockout$
4" x 4"/4" x 3" (LP818-040)
Horizontal Twin Tee (All HUB)
3" x 3" x 1 1/2" x 1 1/2" (LP447-337)
Hub Adapter, Cast Iron, Increaser (CI SxDWV H)
2" x 1 1/2" (LP123R-251)	3" x 1 1/2" (LP123R-337)	3" x 2" (LP123R-338)
L.A. Pattern P-Trap (SLIP x H)%
1 1/2" (LP711X-015)	1 1/2" x 1 1/4" (LP711X-212)
Long Sweep 1/4 Bend w/ High Heel Inlet (All HUB)
3" x 3" x 1 1/2" (LP308-337)
Long Sweep 1/4 Bend w/ Side Inlet (All HUB)
3" x 3" x 2" (LP311-338)
Plug Slip (S)
1 1/4" - 12" (LP110S-xxx)
Wye w/ Left Side Inlet (All HUB)
3" x 3" x 3" x 2" (LP625-338)	4" x 4" x 4" x 2" (LP625-420)
Wye w/ Right Side Inlet (All HUB)
3" x 3" x 3" x 2" (LP626-338)	4" x 4" x 4" x 2" (LP626-420)
$ Fits inside 4" DWV pipe or over 3" pipe % With chrome nut, with chrome nut and washer # This product may be marked with an alternate trade name: Liansu. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [3] Product is authorized to bear the cNSF and/or the cNSFus Mark except for 1/4, 3/8, 3-1/2 and 5 in. fittings. [4] Figure numbers may have the following prefix used to identify retail packaging requirements: R
DWV Pipe	PVC	Viterra	ASTM D2665
1 1/4" - 6" Sch 40
Fittings§ [1]	ABS	Viterra	ASTM D2661
22 1/2° Street Elbow (HUB x Spg)
A326-030 (3")	A326-040 (4")	A326-020 (2")	A326-015 (1 1/2")
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Figure numbers may have one of the following optional prefixes used to identify retail packaging requirements: URP, U, UTP, USP, UPP, UP, UMP, UHP, UBP, PP, MPP, RP, MRP, RLN, LN, RS, MRR, RL, CPRLN, or RLR.
Fittings[1]	PVC	Viterra	ASTM D3034
1/4 Bend (H × H)
SWR300-040 (4")	SWR300-030 (3")	SWR300-060 (6")	SWR300-080 (8")
[1] Figure numbers may have one of the following optional prefixes used to identify retail packaging requirements: URP, U, UTP, USP, UPP, UP, UMP, UHP, UBP, PP, MPP, RP, MRP, RLN, LN, RS, MRR, RL, CPRLN, or RLR.
Fittings¢ [1]	ABS	Viterra	CSA B181.1
22 1/2° Street Elbow (HUB x Spg)
A326-040 (4")	A326-030 (3")	A326-020 (2")	A326-015 (1 1/2")
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Figure numbers may have one of the following optional prefixes used to identify retail packaging requirements: URP, U, UTP, USP, UPP, UP, UMP, UHP, UBP, PP, MPP, RP, MRP, RLN, LN, RS, MRR, RL, CPRLN, or RLR.
Fittings§ [3] [4]	PVC	Viterra	ASTM D2665
Trap Adapter-Female w/Plastic Nut & Washer(HxSLIP)
1 1/4" (PD104W-012)	1-1/2 x 1-1/4" (PD104W-212)	1-1/2" (PD104W-015)	2" (PD104W-020)
Trap Adapter-Male w/Plastic Nut & Washer(S x SLIP)
1 1/4" - 2" (PD103W-xxx)
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [3] Product is authorized to bear the cNSF and/or the cNSFus Mark except for 1/4, 3/8, 3-1/2 and 5 in. fittings. [4] Figure numbers may have the following prefix used to identify retail packaging requirements: R
Fittings¢ [3] [4]	MLTPL	Viterra	CSA B181.2
Trap Adapter-Female w/Plastic Nut & Washer(HxSLIP)
2" (PD104W-020)	1 1/4" (PD104W-012)	1-1/2 x 1-1/4" (PD104W-212)	1-1/2" (PD104W-015)
Trap Adapter-Male w/Plastic Nut & Washer(S x SLIP)
1 1/4" - 2" (PD103W-xxx)
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [3] Product is authorized to bear the cNSF and/or the cNSFus Mark except for 1/4, 3/8, 3-1/2 and 5 in. fittings. [4] Figure numbers may have the following prefix used to identify retail packaging requirements: R
Fittings¢ [2] [4]	Viterra	Viterra	CSA B181.2
L.A. Pattern P-Trap, w/ Union Joint (SLIP x H)
1 1/4" x 1 1/2"	(PD711W-xxx)	(PD711W-xxx) (SLIP x H w/ Plastic Nut & Washer)	1 1/2"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [2] XXX - size 012 - 1 1/4" 015 - 1 1/2" 020 - 2" 030 - 3" 040 - 4" 060 - 6" 080 - 8" 100 - 10" 120 - 12" 169 - 1 1/4" x 1 1/2" 212 - 1 1/2" x 1 1/4" 213 - 1 1/2" x 2" 241 - 2" × 1 1/2" × 1 1/2" or 2" × 1 1/2" × 1 1/2" × 1 1/2" 251 - 2" × 1 1/2" or 2" × 2" × 1 1/2" × 1 1/2" 253 - 2" x 3" 337 - 3" × 1 1/2" or 3" × 3" × 1 1/2" or 3" × 3" × 3" × 1 1/2" 338 - 3" × 2" or3" × 3" × 2" or 3" × 3" × 3" × 2" 342 - 3" x 4" 415 - 4" × 4" × 1/2" 420 - 4" × 2" or 4" × 4" × 2" or 4" × 4" × 4" × 2" 422 - 4" × 3" or 4" × 4" × 3" or 4" × 4" × 4" × 3" 532 - 6" × 4" or 6" × 6" × 4" or 6" × 6" × 6" × 4" 582 - 8" × 4" or 8" × 8" × 4" or 8" × 8" × 8" × 4" 585 - 8" × 6" or 8" × 8" × 6" or 8" × 8" × 8" × 6" 626 - 10" × 6" or 10" × 10" × 6" or 10" × 10" × 10" × 6" 628 - 10" × 8" or 10" × 10" × 8" or 10" × 10" × 10" × 8" 670 - 12" × 10" or 12" × 12" × 10" or 12" × 12" × 12" × 10" [4] Figure numbers may have the following prefix used to identify retail packaging requirements: R
Fittings§ [2] [4]	PVC	Viterra	*SE 7992*
L.A. Pattern P-Trap, w/ Union Joint (SLIP x H)
(PD711W-xxx)	1 1/4" x 1 1/2"	1 1/2"	(PD711W-xxx) (SLIP x H w/ Plastic Nut & Washer)
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [2] XXX - size 012 - 1 1/4" 015 - 1 1/2" 020 - 2" 030 - 3" 040 - 4" 060 - 6" 080 - 8" 100 - 10" 120 - 12" 169 - 1 1/4" x 1 1/2" 212 - 1 1/2" x 1 1/4" 213 - 1 1/2" x 2" 241 - 2" × 1 1/2" × 1 1/2" or 2" × 1 1/2" × 1 1/2" × 1 1/2" 251 - 2" × 1 1/2" or 2" × 2" × 1 1/2" × 1 1/2" 253 - 2" x 3" 337 - 3" × 1 1/2" or 3" × 3" × 1 1/2" or 3" × 3" × 3" × 1 1/2" 338 - 3" × 2" or3" × 3" × 2" or 3" × 3" × 3" × 2" 342 - 3" x 4" 415 - 4" × 4" × 1/2" 420 - 4" × 2" or 4" × 4" × 2" or 4" × 4" × 4" × 2" 422 - 4" × 3" or 4" × 4" × 3" or 4" × 4" × 4" × 3" 532 - 6" × 4" or 6" × 6" × 4" or 6" × 6" × 6" × 4" 582 - 8" × 4" or 8" × 8" × 4" or 8" × 8" × 8" × 4" 585 - 8" × 6" or 8" × 8" × 6" or 8" × 8" × 8" × 6" 626 - 10" × 6" or 10" × 10" × 6" or 10" × 10" × 10" × 6" 628 - 10" × 8" or 10" × 10" × 8" or 10" × 10" × 10" × 8" 670 - 12" × 10" or 12" × 12" × 10" or 12" × 12" × 12" × 10" [4] Figure numbers may have the following prefix used to identify retail packaging requirements: R

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings# + [1] [5] [G]	MLTPL	Viterra	CSA B137.3
45° Ell (FIPT x FIPT)
1/4" - 8" (819-xxx)
Cap (SOC)
8" - 12" (447-xxx)
Coupling (SOC x SOC)
8" - 12" (429-xxx)
Female Adapter (SOC x FIPT)
8" (435-080)
Male Adapter (MIPT x SOC)
8" (436-080)
Reducing Bushing Flush Style (SPIG x SOC)
8" - 12" (437-xxx)
Reducing Coupling (SOC x SOC)
8" - 12" (429-xxx)
Reducing Tee (SOC x SOC x SOC)
8" - 12" (401-xxx)
Spigot Female Adapter (SPIG x FIPT)
1/4" - 8" (478-xxx)
Tee (SOC x SOC x SOC)
8" - 12" (401-xxx)
Tee (SOC x FIPT x SOC)
1/4" - 12" (403-xxx)
# This product may be marked with an alternate trade name: Liansu. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is authorized to bear the cNSF and/or the cNSFus Mark except for 1/4, 3/8, 3-1/2 and 5 in. fittings. [5] Figure numbers may have the following prefix used to identify retail packaging requirements: R [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings# + § [5] [G]	PVC	Viterra	ASTM D2466
Reducing Nipple(MIPT × MIPT )
1/4" - 6" (882-xxx)
11-1/4° Ell (SOC x SOC)
1/4" - 12" (411-xxx)
22-1/2° Ell (SOC x SOC)
1/4" - 12" (416-xxx)
22-1/2° Street Ell (SPIG x SOC)
1/4" - 12" (442-xxx)
45° Ell (SOC x SOC)
1/4" - 6" (417-xxx)	8" - 12" (417-xxx)
45° Street Ell (SPIG x SOC)
1/4" - 12" (427-xxx)
90° Ell (SOC x SOC)
1/4" - 6" (406-xxx)	8" - 12" (406-xxx)
90° Ell (SOC x FIPT)
1/4" - 6" (407-xxx)
90° Ell (FIPT x FIPT)
1/4" - 6" (408-xxx)
90°STREET ELL (SPIG × FIPT)
1/4" - 12" (404-xxx)
90° Street Ell (SPIG x SOC)
1/4" - 6" (409-xxx)	1/4" - 6" (409-xxxF)	8" - 12" (409-xxx)
90° Street Ell (MIPT x SOC)
1/4" - 6" (410-xxx)
90° Street Ell (MIPT x FIPT)
1/4" - 6" (412-xxx)	1/4" - 6" (412-xxxx)
90° Sweep Ell (SOC x SOC)
1/4" - 12" (406-xxxS)
90° Reducing Ell (SOC x SOC)
1/4" - 6" (406-xxx)	1/4" - 6" (406-xxxN)	1/4" - 6" (D406-xxx)
90° Reducing Ell (SOC x FIPT)
1/4" - 6" (407-xxx)
90° Reducing Street Ell (MIPT x SOC)
1/4" - 6" (410-xxx)
Cap (SOC)
1/4" - 6" (447-xxx)	8" - 12" (447-xxx)
Cap (FIPT)
1/4" - 6" (448-xxx)
Cross (SOC x SOC x SOC x SOC)
1/4" - 6" (420-xxx)	1/4" - 6" (420-xxxF)
Coupling (SOC x SOC)
1/4" - 6" (429-xxx)	1/4" - 6" (429-xxxN)	8" - 12" (429-xxx)
Coupling (FIPT x FIPT)
1/4" - 6" (430-xxx)	1/4" - 6" (430-xxxx)
Deep Socket Coupling (SOC x SOC)
1/4" - 6" (479-xxx)	1/4" - 6" (479-xxxN)
Deep Socket 45°Ell (SOC × SOC)
1/4" - 12" (417-xxxDS)
Eccentric Reducer Coupling (SOC x SOC)
1/4" - 6" (429-xxxE)
Female Adapter (SOC x FIPT)
1/4" - 4" (435-xxx)	1/4" - 4" (D435-xxx)	8" (435-080)
Male Adapter (SOC x MIPT)
1/4" - 6" (436-xxx)
Male Adapter (take off) (SPIG x MIPT)
1/4" - 6" (461-xxx)
Male Adapter (MIPT x SOC)
8" (436-080)
Plug (SPIG)
1/4" - 6" (449-xxx)
Plug (MIPT)
1/4" - 6" (450-xxx)
Reducing Bushing Flush Style (SPIG x SOC)
1/4" - 6" (437-xxx)	8" - 12" (437-xxx)
Reducing Bushing Flush Style (SPIG x FIPT)
1/4" - 6" (438-xxx)
Reducing Coupling (SOC x SOC)
1/4" - 6" (429-xxx)	1/4" - 6" (429-xxxF)	8" - 12" (429-xxx)
Reducing Coupling (FIPT x FIPT)
1/4" - 6" (430-xxx)
Reducing Cross (SOC x SOC x SOC x SOC)
1/4" - 6" (420-xxx)	1/4" - 6" (420-xxxF)
Reducing Female Adapter (SOC x FIPT)
1/4" - 6" (435-xxx)
Reducing Male Adapter (SOC x MIPT)
1/4" - 6" (436-xxx)
Reducing T.T. Bushing Flush Style (FIPT x MIPT)
1/4" - 6" (439-xxx)
Reducing Tee (SOC x SOC x SOC)
1/4" - 6" (401-xxx)	1/4" - 6" (401-xxxF)	1/4" - 6" (D401-xxx)	8" - 12" (401-xxx)
Reducing Tee (SOC x SOC x FIPT)
1/4" - 6" (402-xxx)
Riser Extension (FIPT x MIPT)
1/2" (434-005)	3/4" (434-007)
Side Outlet Ell (SOC x SOC x SOC)
1/4" - 6" (413-xxx)
Side Outlet Ell (SOC x SOC x FIPT)
1/4" - 6" (414-xxx)
Spigot Female Adapter (SPIG x FIPT)
1/4" - 8" (478-xxx)
Street Tee (SPIG x SOC x SOC)
1/4" - 6" (444-xxx)
Tee (SOC x SOC x SOC)
1/4" - 6" (401-xxx)	8" - 12" (401-xxx)
Tee (SOC x SOC x FIPT)
1/4" - 6" (402-xxx)
Tee (SOC x FIPT x SOC)
1/4" - 12" (403-xxx)
Tee (FIPT x FIPT x FIPT)
1/4" - 6" (405-xxx)
# This product may be marked with an alternate trade name: Liansu. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [5] Figure numbers may have the following prefix used to identify retail packaging requirements: R [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings# [5]	PVC	Viterra	ASTM D2467
45° Ell (SOC x SOC)
1/4" - 6" (817-xxx)	1/4" - 6" (817-xxxF)	8" - 12" (817-xxx)
45° Ell (FIPT x FIPT)
1/4" - 8" (819-xxx)
90° Ell (SOC x SOC)
1/4" - 6" (806-xxx)	1/4" - 6" (806-xxxF)	8" - 12" (806-xxx)
90° Ell (SOC x FIPT)
1/4" - 6" (807-xxx)
90° Ell (FIPT x FIPT)
1/4" - 6" (808-xxx)
45° Street Ell(SPIG × SOC)
1/4" - 12" (827-xxx)
90˜ Street Ell (SPIG x SOC)
1/4" - 6" (809-xxx)
90° Street Ell (MIPT x SOC)
1/4" - 6" (812-xxx)
Cap (SOC)
1/4" - 6" (847-xxx)	8" - 12" (847-xxx)
Cap (FIPT)
1/4" - 6" (848-xxx)	1/4" - 6" (848-xxxF)
Coupling (SOC x SOC)
1/4" - 6" (829-xxx)	1/4" - 6" (829-xxxF)	8" - 12" (829-xxx)
Coupling (FIPT x FIPT)
1/4" - 6" (830-xxx)	1/4" - 6" (830-xxxF)
Cross (SOC x SOC x SOC x SOC)
1/4" - 6" (820-xxx)	1/4" - 6" (820-xxxF)
Eccentric Reducing Coupling (SOC x SOC)
1/4" - 6" (820-xxxFE)
Female Adapter (SOC x FIPT)
1/4" - 6" (835-xxx)
Male Adapter (MIPT x SOC)
1/4" - 6" (836-xxx)	1/4" - 6" (836-xxxF)
Male Adapter (SPIG x MIPT)
1/4" - 6" (861-xxx)
Plug (SPIG)
1/4" - 6" (849-xxx)	1/4" - 6" (849-xxxF)
Plug (MIPT)
1/4" - 6" (850-xxx)
Reducing Bushing Flush Style (SPIG x SOC)
1/4" - 6" (837-xxx)	1/4" - 6" (837-xxxF)	8" - 12" (837-xxx)
Reducing Bushing Flush Style (SPIG x FIPT)
1/4" - 6" (838-xxx)
Reducing Coupling (SOC x SOC)
1/4" - 6" (829-xxx)	1/4" - 6" (829-xxxF)	8" - 12" (829-xxx)
Reducing Coupling (FIPT x FIPT)
1/4" - 6" (830-xxx)
Reducing Cross (SOC x SOC x SOC x SOC)
1/4" - 6" (820-xxx)	1/4" - 6" (820-xxxF)
Reducing Nipple(MIPT × MIPT )
1/4" - 6" (882-xxx)
Reducing Tee (SOC x SOC x FIPT)
1/4" - 6" (802-xxx)	1/4" - 6" (802-xxxF)
Reducing Tee (SOC x SOC x SOC)
1/4" - 6" (801-xxx)	1/4" - 6" (804-xxxF	8" - 12" (801-xxx)
Reducing Wye (SOC x SOC x SOC)
1/4" - 6" (875-xxx)	1/4" - 6" (875-xxxF)
Riser Extension (FIPT x MIPT)
1/2" (434-005)	3/4" (434-007)
Street Tee (SPIG x SOC x SOC)
1/4" - 6" (844-xxx)
Reducing T.T. Bushing Flush Style (FIPT x MIPT)
1/4" - 6" (839-xxx)
Tee (SOC x SOC x SOC)
1/4" - 6" (801-xxx)	1/4" - 6" (801-xxxF)
Tee (SOC x SOC x FIPT)
1/4" - 6" (802-xxx)
Tee (FIPT x FIPT x FIPT)
1/4" - 6" (805-xxx)
# This product may be marked with an alternate trade name: Liansu. [5] Figure numbers may have the following prefix used to identify retail packaging requirements: R
Fittings# + [1] [5] [G]	PVC	Viterra	CSA B137.3
11-1/4° Ell (SOC × SOC)
1/4" - 12" (411-xxx)
22-1/2° Ell (SOC × SOC)
1/4" - 12" (416-xxx)
22-1/2° Street Ell (SPIG × SOC)
1/4" - 12" (442-xxx)
45° Ell (SOC x SOC)
1/4" - 6" (417-xxx)	1/4" - 6" (817-xxx)	1/4" - 6" (817-xxxF)	8" - 12" (417-xxx)
8" - 12" (817-xxx)
90° Ell (SOC x SOC)
1/4" - 6" (406-xxx)	1/4" - 6" (806-xxx)	1/4" - 6" (806-xxxF)	8" - 12" (406-xxx)
8" - 12" (806-xxx)
90° Ell (SOC x FIPT)
1/4" - 6" (407-xxx)	1/4" - 6" (807-xxx)
90° Ell (FIPT x FIPT)
1/4" - 6" (408-xxx)	1/4" - 6" (808-xxx)
45° Street Ell (SPIG × SOC)
1/4" - 12" (427-xxx)	1/4" - 12" (827-xxx)
90° Street Ell (SPIG x SOC)
1/4" - 6" (409-xxx)	1/4" - 6" (409-xxxF)	1/4" - 6" (809-xxx)	8" - 12" (409-xxx)
90° Street Ell (MIPT x SOC)
1/4" - 6" (410-xxx)	1/4" - 6" (812-xxx)
90° Street Ell (MIPT x FIPT)
1/4" - 6" (412-xxx)	1/4" - 6" (412-xxxx)
90°Street Ell (SPIG × FIPT)
1/4" - 12" (404-xxx)
90° Sweep Ell (SOC × SOC)
1/4" - 12" (406-xxxS)
90° Reducing Ell (SOC x SOC)
1/4" - 6" (406-xxx)	1/4" - 6" (406-xxxN)	1/4" - 6" (D406-xxx)
90° Reducing Ell (SOC x FIPT)
1/4" - 6" (407-xxx)
90° Reducing Street Ell (MIPT x SOC)
1/4" - 6" (410-xxx)
Cap (SOC)
1/4" - 6" (447-xxx)	1/4" - 6" (847-xxx)	8" - 12" (847-xxx)
Cap (FIPT)
1/4" - 6" (448-xxx)	1/4" - 6" (848-xxx)	1/4" - 6" (848-xxxF)
Cross (SOC x SOC x SOC x SOC)
1/4" - 6" (420-xxx)	1/4" - 6" (420-xxxF)	1/4" - 6" (820-xxx)	1/4" - 6" (820-xxxF)
Coupling (SOC x SOC)
1/4" - 6" (429-xxx)	1/4" - 6" (429-xxxN)	1/4" - 6" (829-xxx)	1/4" - 6" (829-xxxF)
8" - 12" (829-xxx)
Coupling (FIPT x FIPT)
1/4" - 6" (430-xxx)	1/4" - 6" (430-xxxx)	1/4" - 6" (830-xxx)	1/4" - 6" (830-xxxF)
Deep Socket Coupling (SOC x SOC)
1/4" - 6" (479-xxx)	1/4" - 6" (479-xxxN)
Deep Socket 45°Ell (SOC × SOC)
1/4" - 12" (417-xxxDS)
Eccentric Reducer Coupling (SOC x SOC)
1/4" - 6" (429-xxxE)	1/4" - 6" (820-xxxFE)
Female Adapter (SOC x FIPT)
1/4" - 6" (435-xxx)	1/4" - 6" (835-xxx)	1/4" - 6" (D435-xxx)
Male Adapter (MIPT x SOC)
1/4" - 6" (436-xxx)	1/4" - 6" (836-xxx)	1/4" - 6" (836-xxxF)
Male Adapter (take off) (SPIG x MIPT)
1/4" - 6" (461-xxx)
Male Adapter (SPIG x MIPT)
1/4" - 6" (861-xxx)
Plug (SPIG)
1/4" - 6" (449-xxx)	1/4" - 6" (849-xxx)	1/4" - 6" (849-xxxF)
Plug (MIPT)
1/4" - 6" (450-xxx)	1/4" - 6" (850-xxx)
Reducing Bushing Flush Style (SPIG x SOC)
1/4" - 6" (837-xxx)	1/4" - 6" (837-xxxF)	8" - 12" (837-xxx)
Reducing Bushing Flush Style (SPIG x SOC)
1/4" - 6" (437-xxx)
Reducing Bushing Flush Style (SPIG x FIPT)
1/4" - 6" (438-xxx)	1/4" - 6" (838-xxx)
Reducing Coupling (SOC x SOC)
1/4" - 6" (429-xxx)	1/4" - 6" (429-xxxF)	1/4" - 6" (829-xxx)	1/4" - 6" (829-xxxF)
8" - 12" (829-xxx)
Reducing Coupling (FIPT x FIPT)
1/4" - 6" (430-xxx)	1/4" - 6" (830-xxx)
Reducing Cross (SOC x SOC x SOC x SOC)
1/4" - 6" (420-xxx)	1/4" - 6" (420-xxxF)	1/4" - 6" (820-xxx)	1/4" - 6" (820-xxxF)
Reducing Female Adapter (SOC x FIPT)
1/4" - 6" (435-xxx)
Reducing Male Adapter (SOC x MIPT)
1/4" - 6" (436-xxx)
Reducing T.T. Bushing Flush Style (FIPT x MIPT)
1/4" - 6" (439-xxx)
Reducing Tee (SOC x SOC x SOC)
1/4" - 6" (401-xxx)	1/4" - 6" (401-xxxF)	1/4" - 6" (801-xxx)	1/4" - 6" (804-xxxF
1/4" - 6" (D401-xxx)	8" - 12" (801-xxx)
Reducing Tee (SOC x SOC x FIPT)
1/4" - 6" (402-xxx)	1/4" - 6" (802-xxx)	1/4" - 6" (802-xxxF)
Reducing Wye (SOC x SOC x SOC)
1/4" - 6" (475-xxx)	1/4" - 6" (475-xxxF)	1/4" - 6" (875-xxx)	1/4" - 6" (875-xxxF)
Riser Extension (FIPT x MIPT)
1/2" (434-005)	1/2" (434-005)	3/4" (434-007)	3/4" (434-007)
Side Outlet Ell (SOC x SOC x SOC)
1/4" - 6" (413-xxx)
Side Outlet Ell (SOC x SOC x FIPT)
1/4" - 6" (414-xxx)
Street Tee (SPIG x SOC x SOC)
1/4" - 6" (444-xxx)	1/4" - 6" (844-xxx)
Reducing T.T. Bushing Flush Style (FIPT x MIPT)
1/4" - 6" (839-xxx)
Tee (SOC x SOC x SOC)
1/4" - 6" (401-xxx)	1/4" - 6" (801-xxx)	1/4" - 6" (801-xxxF)	8" - 12" (801-xxx)
Tee (SOC x SOC x FIPT)
1/4" - 6" (402-xxx)	1/4" - 6" (802-xxx)
Tee (FIPT x FIPT x FIPT)
1/4" - 6" (405-xxx)	1/4" - 6" (805-xxx)
Wye (SOC x SOC x SOC)
1/4" - 12" (875-xxx)	1/4" - 6" (475-xxx)
# This product may be marked with an alternate trade name: Liansu. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product is authorized to bear the cNSF and/or the cNSFus Mark except for 1/4, 3/8, 3-1/2 and 5 in. fittings. [5] Figure numbers may have the following prefix used to identify retail packaging requirements: R [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings# + ¢ [2] [5] [G]	PVC	Viterra	ASTM F1970
Compression Coupling (GASKET x GASKET)
IR90-05 (1/2")	IR90-07 (3/4")	IR90-10 (1")	IR90-12 (1 1/4")
IR90-15 (1 1/2")	IR90-20 (2")	IR90-25 (2 1/2")	IR90-30 (3")
IR90-40 (4")	IR90-60 (6")
Compression Tee (GASKET x GASKET x FIPT)
IR91-05 (1/2")	IR91-07 (3/4")	IR91-10 (1")
Expand Repair Coupling(SOC x SPIG)
FSF-250 (2 1/2")	FSF-300 (3")	FSF-400 (4")
# This product may be marked with an alternate trade name: Liansu. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [2] PVC Fittings rated as 200psi at 23ºC. [5] Figure numbers may have the following prefix used to identify retail packaging requirements: R [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings# + [3] [5] [G]	PVC	Viterra	ASTM F1970
Union w/o-ring Seal (FIPT × FIPT)
1/4" - 6" (898-xxx)
Union w/o-ring Seal (SOC × FIPT)
1/4" - 6" (899-xxx)
# This product may be marked with an alternate trade name: Liansu. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [3] PVC Fittings rated as 235psi at 23ºC [5] Figure numbers may have the following prefix used to identify retail packaging requirements: R [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings# + ¢ [3] [5] [G]	PVC	Viterra	ASTM F1970
Expand Repair Coupling (SOC x SPIG)
FSF-050 (1/2")	FSF-075 (3/4")	FSF-100 (1")	FSF-125 (1 1/4")
FSF-150 (1 1/2")	FSF-200 (2")
# This product may be marked with an alternate trade name: Liansu. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [3] PVC Fittings rated as 235psi at 23ºC [5] Figure numbers may have the following prefix used to identify retail packaging requirements: R [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings# + ¢ § [3] [5] [G]	PVC	Viterra	ASTM F1970
Union w/o-ring Seal (SOC × FIPT)
1/4" - 6" (899-xxx)
Union w/ O-ring Seal (SOC x SOC)
897-xxx (1/4" - 6")
Union w/o-ring Seal (SOC × MIPT)
1/4" - 6" (896-xxx)
Union w/o-ring Seal (FIPT × FIPT)
1/4" - 6" (898-xxx)
# This product may be marked with an alternate trade name: Liansu. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [3] PVC Fittings rated as 235psi at 23ºC [5] Figure numbers may have the following prefix used to identify retail packaging requirements: R [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings# + ¢ § [4] [5] [G]	PVC	Viterra	ASTM F1970
Union w/ O-ring Seal (FIPT x FIPT)
498-005 (1/2")
Union w/ O-ring Seal (SOC x SOC)
497-005 (1/2")
Union w/ O-ring Seal (FIPT x FIPT)
498-007 (3/4")
Union w/ O-ring Seal (SOC x SOC)
497-007 (3/4")	497-010 (1")
Union w/ O-ring Seal (FIPT x FIPT)
498-010 (1")
Union w/ O-ring Seal (SOC x SOC)
497-012 (1 1/4")
Union w/ O-ring Seal (FIPT x FIPT)
498-012 (1 1/4")	498-015 (1 1/2")
Union w/ O-ring Seal (SOC x SOC)
497-015 (1 1/2")	497-020 (2")
Union w/ O-ring Seal (FIPT x FIPT)
498-020 (2")
Expand Repair Coupling (SOC x SPIG)
FSF-600 (6")
Floor Flange (FIPT)
852-xxx (1/4" - 6")
Blind Flange
1/4" - 12" (853-xxx)
Flange Two Pieces (SOC)
1/4" - 12" (854-xxx)
Flange Van Stone Style W/PVC Ring (SPIG)
1/4" - 12" (856-xxx)
Flange One Piece (SOC)
1/4" - 12" (851-xxx)
# This product may be marked with an alternate trade name: Liansu. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [4] PVC Fittings rated as 150psi at 23ºC [5] Figure numbers may have the following prefix used to identify retail packaging requirements: R [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings# + ¢ [2] [5] [G]	PVC	Viterra	CSA B137.3
Compression Coupling (GASKET x GASKET)
IR90-05 (1/2")	IR90-07 (3/4")	IR90-10 (1")	IR90-12 (1 1/4")
IR90-15 (1 1/2")	IR90-20 (2")	IR90-25 (2 1/2")	IR90-30 (3")
IR90-40 (4")	IR90-60 (6")
Compression Tee (GASKET x GASKET x FIPT)
IR91-05 (1/2")	IR91-07 (3/4")	IR91-10 (1")
Expand Repair Coupling(SOC x SPIG)
FSF-250 (2 1/2")	FSF-300 (3")	FSF-400 (4")
# This product may be marked with an alternate trade name: Liansu. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [2] PVC Fittings rated as 200psi at 23ºC. [5] Figure numbers may have the following prefix used to identify retail packaging requirements: R [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings# + ¢ [5] [G]	PVC	Viterra	CSA B137.3
Expand Repair Coupling (SOC x SPIG)
FSF-050 (1/2")	FSF-075 (3/4")	FSF-100 (1")	FSF-125 (1 1/4")
FSF-150 (1 1/2")	FSF-200 (2")	FSF-600 (6")
Union w/ O-ring Seal (FIPT x FIPT)
498-005 (1/2")	498-007 (3/4")	498-010 (1")	498-012 (1 1/4")
498-015 (1 1/2")	498-020 (2")
Union w/ O-ring Seal (SOC x SOC)
497-005 (1/2")	497-007 (3/4")	497-010 (1")	497-012 (1 1/4")
497-015 (1 1/2")	497-020 (2")
# This product may be marked with an alternate trade name: Liansu. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [5] Figure numbers may have the following prefix used to identify retail packaging requirements: R [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings# + ¢ § [5] [G]	PVC	Viterra	CSA B137.3
Blind Flange
1/4" - 12" (853-xxx)
Floor Flange (FIPT)
852-xxx (1/4" - 6")
Flange One Piece (SOC)
1/4" - 12" (851-xxx)
Flange Two Pieces (SOC)
1/4" - 12" (854-xxx)
Flange Van Stone Style W/PVC Ring (SPIG)
1/4" - 12" (856-xxx)
# This product may be marked with an alternate trade name: Liansu. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [5] Figure numbers may have the following prefix used to identify retail packaging requirements: R [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings# + ¢ § [5] [G]	PVC	Viterra	CSA B137.3
Union w/o-ring Seal (FIPT × FIPT)
1/4" - 6" (898-xxx)
Union w/o-ring Seal (SOC × FIPT)
1/4" - 6" (899-xxx)
Union w/o-ring Seal (SOC × MIPT)
1/4" - 6" (896-xxx)
Union w/ O-ring Seal (SOC x SOC)
897-xxx (1/4" - 6")
# This product may be marked with an alternate trade name: Liansu. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [5] Figure numbers may have the following prefix used to identify retail packaging requirements: R [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
PVC Pipe# + [G]	PVC	Viterra	ASTM D1785
1/2" - 8" Sch 40
1/2" - 6" Sch 80
# This product may be marked with an alternate trade name: Liansu. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

[6] Certification includes the following:
    1/2" - 8" Sch40 PVC pipe
    031-001 1/8"        
    031-002 1/4"        
    031-003 3/8"
    031-100 10" 
    031-120 12" 
    031-140 14" 
    031-160 16" 
    031-180 18" 
    031-200 20" 
    031-240 24" 
    041-001 1/8"        
    041-002 1/4"        
    041-003 3/8"
    041-005 1/2"        
    041-100 10" 
    041-120 12" 
    041-140 14" 
    041-160 16" 
    041-180 18" 
    041-200 20" 
    041-240 24"
    
[7] Certification includes the following:
    1/2"-6" Sch80 PVC Pipe
    071-001 1/8"        
    071-002 1/4"        
    071-003 3/8"        
    071-035 3-1/2"
    071-050 5"
    071-080 8"  
    071-100 10" 
    071-120 12" 
    071-140 14" 
    071-160 16" 
    071-180 18" 
    071-200 20" 
    071-240 24" 
    081-001 1/8"        
    081-002 1/4"        
    081-003 3/8"        
    081-035 3-1/2"      
    081-050 5"          
    081-080 8"  
    081-100 10" 
    081-120 12" 
    081-140 14" 
    081-160 16" 
    081-180 18" 
    081-200 20" 
    081-240 24"

Reclaimed Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings§ [1]	ABS	Viterra	ASTM D2661
22 1/2° Elbow (HUB x HUB)
LN324-015 (1 1/2")	LN324-020 (2")	LN324-030 (3")	LN324-040 (4")
LN324-060 (6")
22 1/2° Street Elbow (HUB x Spg)
LN326-015 (1 1/2")	LN326-020 (2")	LN326-030 (3")	LN326-040 (4")
45° Double Wye (All HUB)
LN611-015 (1 1/2")	LN611-020 (2")	LN611-030 (3")	LN611-030L (3")
LN611-040 (4")
45° Elbow (HUB x HUB)
LN321-012 (1 1/4")	LN321-015 (1 1/2")	LN321-020L (2")	LN321-030L (3")
LN321-040 (4")	LN321-060 (6")
45° Elbow Long-Turn (HUB x HUB)
LN321-020 (2")	LN321-030 (3")
45° Elbow-Short Turn (HUB x HUB)
LN321-015S (1 1/2")	LN321-020S (2")	LN321-030S (3")	LN321-040S (4")
45° Reducing Double Wye (ALL HUB)
LN612-251 (2" x 2" x 1 1/2" x 1-1/2")	LN612-337 (3" x 3" x 1 1/2" x 1 1/2")	LN612-338 (3" x 3" x 2" x 2")	LN612-420 (4" x 4" x 2" x 2")
LN612-422 (4" x 4" x 3" x 3")	LN612-532 (6" x 6" x 4" x 4")
45° Reducing Street Wye (Spg x HUB x HUB)
LN603-251 (2" x 2" x 1 1/2")	LN603-337 (3" x 3" x 1 1/2")	LN603-338 (3" x 3" x 2")	LN603-420 (4" x 4" x 2")
LN603-422 (4" x 4" x 3")
45° Reducing Wye (HUB x HUB x HUB)
LN601-251L (2" x 2" x 1 1/2")	LN601-337L (3" x 3" x 1 1/2")	LN601-338L (3" x 3" x 2")	LN601-419 (4" x 4" x 1 1/2")
LN601-420L (4" x 4" x 2")	LN601-422L (4" x 4" x 3")	LN601-530 (6" x 6" x 3")
45° Street Elbow (HUB x Spg)
LN323-012 (1 1/4")	LN323-015 (1 1/2")	LN323-020L (2")	LN323-030L (3")
LN323-040 (4")	LN323-060 (6")
45° Street Elbow Long-Turn (HUB x Spg)
LN323-020 (2")	LN323-030 (3")
45° Street Elbow-Short Turn (HUB x Spg)
LN323-015S (1 1/2")	LN323-020S (2")	LN323-030S (3")	LN323-040S (4")
LN323-060 (6")
45° Street Wye (Spg x HUB x HUB)
LN602-015 (1 1/2")	LN602-020 (2")	LN602-030 (3")	LN602-040 (4")
45° Wye (HUB x HUB x HUB)
LN600-012 (1 1/4")	LN600-015 (1 1/2")	LN600-015L (1 1/2")	LN600-020 (2")
LN600-020L (2")	LN600-030 (3")	LN600-030L (3")	LN600-040 (4")
LN600-040L (4")	LN600-060 (6")	LN601-241 (2" x 1 1/2" x 1 1/2")	LN601-251 (2" x 2" x 1 1/2")
LN601-337 (3" x 3" x 1 1/2")	LN601-338 (3" x 3" x 2")	LN601-420 (4" x 4" x 2")	LN601-422 (4" x 4" x 3")
LN601-532 (6" x 6" x 4")
60° Elbow (HUB x HUB)
LN319-015 (1 1/2")	LN319-020 (2")	LN319-030 (3")	LN319-040 (4")
60° Street Elbow (HUB x Spg)
LN320-015 (1 1/2")	LN320-020 (2")	LN320-030 (3")	LN320-040 (4")
90° Double Elbow (HUB x HUB x HUB)
LN327-015 (1 1/2")	(LN327-020 (2")	LN327-030 (3")	LN327-040 (4")
LN327-241 (2 x 1 1/2 x 1 1/2")
90° Elbow (HUB x HUB)
LN300-012 (1 1/4")	LN300-015 (1 1/2")	LN300-020 (2")	LN300-030 (3")
LN300-040 (4")	LN300-060 (6")
90° Elbow w/ Low Heel Inlet (HUB x HUB x HUB)
LN303-337 (3" x 3" x 1 1/2")	LN303-338 (3" x 3" x 2")	LN303-420 (4" x 4" x 2")
90° Elbow-Short Turn (HUB x HUB)
LN300-012S (1 1/4")	LN300-015S (1 1/2")	LN300-020S (2")	LN300-030S (3")
LN300-040S (4")	LN300-060S (6")
90° Long Sweep Elbow (HUB x HUB)
LN304-012 (1 1/4")	LN304-015 (1 1/2")	LN304-020 (2")	LN304-030 (3")
LN304-040 (4")
90° Long Sweep Elbow, Street (HUB x SPG))
LN309-015 (1 1/2")	LN309-020 (2")	LN309-030 (3")	LN309-040 (4")
90° Reducing Closet Elbow (HUB x HUB)
LN329-422 (4" x 3")
90° Reducing Closet St. Elbow w/Test Cap(HUBxSpg)
LN330X-342 (3" x 4")	LN330X-422 (4" x 3")
90° Reducing Closet Street Elbow (HUB x Spg)
LN330-342 (3" x 4")	LN330-422 (4" x 3")
90° Street Elbow (Hub x Spg)
LN302-012 (1 1/4")	LN302-015 (1 1/2")	LN302-020 (2")	LN302-030 (3")
LN302-040 (4")	LN302-060 (6")
90° Street Elbow w/Low Heel Inlet (HUBxSpgxHUB)
LN310-338 (3" x 3" x 2")
90° Street Elbow-Short Turn (HUB x Spg)
LN302-015S (1 1/2")	LN302-020S (2")	LN302-030S (3")	LN302-040S (4")
90° Vent Elbow (HUB x HUB)
LN331-012 (1 1/4")	LN331-015 (1 1/2")	LN331-020 (2")	LN331-030 (3")
(LN331-040 (4")
Adapter Bushing (DWV Spg X S&D HUB)
LN118-030 (3")	LN118-040 (4")
Cap (HUB)
LN116-012 (1 1/4")	LN116-015 (1 1/2")	LN116-020 (2")	LN116-030 (3")
LN116-040 (4")	LN116-060 (6")
Cast Iron Adapter (HUB x HUB)
LN125-040 (4")
Cast Iron HUB Adapter (Spigot x HUB)
LN124-020 (2")	LN124-040 (4")	LN124-422 (4" x 3")
Cleanout Adapter (Spg x FIPT)
LN105-012 (1 1/4")	LN105-015 (1 1/2")	LN105-020 (2")	LN105-030 (3")
LN105-040 (4")	LN105-060 (6")
Cleanout Adapter w/ Plug (Spg x Cleanout w/ Plug)
LN105X-012 (1 1/4")	LN105X-015 (1 1/2")	LN105X-020 (2")	LN105X-030 (3")
LN105X-040 (4")	LN105X-060 (6")
Cleanout Plug (MIPT)
LN106-012 (1 1/4")	LN106-015 (1 1/2")	LN106-020 (2")	LN106-025 (2 1/2")
LN106-030 (3")	LN106-035 (3 1/2")	LN106-040 (4")
Closet Flange (FIPT)
LN830-422 (4" x 3")
Closet Flange (HUB)
LN800-040 (4" x 4")	LN800-422 (4" x 3")	LN800-422L (4" x 3")
Closet Flange (MIPT)
LN831-422 (4" x 3")
Closet Flange w/ Adjustable Metal Ring (H)!
LN81-040 (4")	LN81-422 (4" x 3")
Closet Flange w/ Adjustable Metal Ring (S)!
LN812-040 (4")	LN812-422 (4" x 3")
Closet Flange w/ Adjustable Plastic Ring (HUB)
LN810P-422 (4" × 3")	LN810P-040 (4" x 4")
Closet Flange w/ Adjustable Plastic Ring (Spg)
LN812P-040 (4" x 4")	LN812P-422 (4" x 3")
Closet Flange w/ Knockout & Pipe Stop (HUB)
LN815K-040 (4" x 4"/ 4" x 3")
Closet Flange w/ Knockout Test Plug (HUB)
LN800T-040 (4" x 4")	LN800T-422 (4" x 3")	LN800T-422L (4" x 3")
Closet Flange w/ Pipe Stop (HUB)
LN815PS-040 (4" x 4" / 4" x 3" )
Closet Flange w/ Ring-Pull Test Plug (HUB)
LN800R-040 (4" x 4")	LN800R-422 (4" x 3")	LN800R-422L (4" x 3")
Closet Flange w/ Screw Test Plug (HUB)
LN800T-422C (4" x 3")	LN800T-422CL (4" x 3")	LN800T-040C (4")
Closet Flange, w/ Adjustable w/ PVC Plastic Ring*
LN820P-422 (4" x 3")
Combination Wye & 1/8 Bend (1 Piece) (HUBxHUBxHUB)
LN501-015 (1 1/2")	LN501-020 (2")	LN501-030 (3")	LN501-040 (4")
Combination Wye & 1/8 Bend(Two Piece)(HUBxHUBxHUB)
LN503-020 (2")
Counter Sunk Plug (MIPT)
LN106C-015 (1 1/2")	LN106C-020 (2")	LN106C-030 (3")	LN106C-040 (4")
Coupling (HUB x HUB)
LN100-012 (1 1/4")	LN100-015 (1 1/2")	LN100-020 (2")	LN100-030 (3")
LN100-040 (4")	LN100-060 (6")
Double Fixture Fitting (All HUB)
LN500-020 (2")	LN500-030 (3")	LN500-241 (2" x 1 1/2" x 1 1/2" x 1 1/2")	LN500-251 (2" x 2" x 1 1/2" x 1 1/2")
LN500-257 (2" x 1 1/2" x 2" x 2")	LN500-338 (3" x 2" x 3" x 3")
Double Sanitary Tee (All HUB)
LN428-015 (1 1/2")	LN428-020 (2")	LN428-030 (3")	LN428-040 (4")
LN429-337 (3" x 3" x 1 1/2" x 1 1/2")
Double Sanitary Tee w/ R & L Side Inlet (ALL HUB)
LN439-338 (3" x 3" x 3" x 3" x 2" x 2")
Double Sanitary Tee w/ Side Inlet (ALL HUB)
LN438-337 (3" x 3" x 3" x 3" x 1 1/ 2")	LN438-338 (3" x 3" x 3" x 3" x 2")	LN438-420 (4" x 4" x 4" x 4" x 2")
Female Adapter (HUB x FIPT)
LN101-012 (1 1/4")	LN101-015 (1 1/2")	LN101-020 (2")	LN101-030 (3")
LN101-040 (4")	LN101-060 (6")
Flush Adapter (Spg x FIPT)
LN108-209 (1 1/2" x 1/2")	LN108-210 (1 1/2" x 3/4")	LN108-212 (1 1/2 x 1 1/4")	LN108-251 (2" x 1 1/2")
LN108-337 (3" x 1 1/2")	LN108-338 (3" x 2")	LN108-422 (4" x 3")
Flush Bushing (Spg x HUB)
LN107-212 (1 1/2" x 1 1/4")	LN107-251 (2" x 1 1/2")	LN107-337 (3" x 1 1/2")	LN107-338 (3" x 2")
LN107-419 (4" x 1 1/2")	LN107-420 (4" x 2")	LN107-422 (4" x 3")	LN107-532 (6" x 4")
Flush C.O. Plug (MPT)§
LN110-020 (2")	LN110-040 (4")	LN110-030 (3")
Flush Closet Flange (Inside 4", Outside 3")
LN815-040 (4" x 4" / 4" x 3")
Male Adapter (HUB x MIPT)
LN109-012 (1 1/4")	LN109-015 (1 1/2")	LN109-020 (2")	LN109-030 (3")
LN109-040 (4")	LN109-212 (1 1/2" x 1 1/4")
Male Adapter (Spg x MIPT)
LN111-012 (1 1/4")	LN111-015 (1 1/2")	LN111-020 (2")	LN111-030 (3")
LN111-040 (4")	LN111-212 (1 1/2 x 1 1/4")
No-Hub Adapter (Spg x HUB)
LN119-020 (2")	LN119-030 (3")	LN119-040 (4")	LN119-251 (2" x 1 1/2")
LN119-422 (4" x 3")
Offset Closet Flange,w/ Adjustable Metal Ring (H)!
LN820-040 (4")	LN820-422 (4" x 3")
P-Trap (Hub x Hub)
LN706X-015 (1 1/2")	LN706X-020 (2")	LN706X-030 (3")	LN706X-040 (4")
P-Trap w/ Union Joint (Hub x Hub)
LN708P-012 (1 1/4")	LN708P-015 (1 1/2")
Pipe Increaser-Reducer (HUB x HUB)
LN102-212 (1 1/2" x 1 1/4")	LN102-251 (2" x 1 1/2")	LN102-337 (3" x 1 1/2")	LN102-338 (3" x 2")
LN102-420 (4" x 2")	LN102-420L (4" x 2")	LN102-422 (4" x 3")	LN102-422L (4" x 3")
Red. Comb. Wye & 1/8 Bend (1 Piece)(HUBxHUBxHUB)
LN502-241 (2" x 1 1/2" x 1 1/2")	LN502-251 (2" x 2" x 1 1/2")	LN502-257 (2" x 1 1/2" x 2")	LN502-337 (3" x 3" x 1 1/2")
LN502-338 (3" x 3" x 2")	LN502-420 (4" x 4" x 2")	LN502-422 (4" x 4" x 3")
Reducing Closet Flange (Spg)
LN801-422 (4" x 3")
Reducing Double Sanitary Tee (ALL HUB)
LN429-251 (2" x 2" x 1 1/2" x 1 1/2")	LN429-323 (3" x 3" x 2" x 1 1/2")	LN429-337 (3" x 3" x 1 1/2" x 1 1/2")	LN429-338 (3" x 3" x 2" x 2")
LN429-420 (4" x 4" x 2" x 2")	LN429-422 (4" x 4" x 3" x 3")
Reducing Sanitary Tee (HUB x HUB x HUB)
LN401-212 (1 1/2" x 1 1/2" x 1 1/4")	LN401-222 (1 1/2" x 1 1/4" x 1 1/4")	LN401-225 (1 1/2" x 1 1/4" x 1 1/2")	LN401-241L (2" x 1 1/2" x 1 1/2")
LN401-251L (2" x 2" x 1 1/2")	LN401-257L (2" x 1 1/2" x 2")	LN401-337 (3" x 3" x 1 1/2")	LN401-338L (3" x 3" x 2")
LN401-419 (4" x 4" x 1 1/2")	LN401-420 (4" x 4" x 2")	LN401-422 (4" x 4" x 3")	LN401-532 (6" x 6" x 4")
Reducing Street Sanitary Tee (Spg x HUB x HUB)
LN404-241 (2" x 1 1/2" x 1 1/2")	LN404-251 (2" x 2' x 1 1/2")	LN404-257 (2" x 1 1/2" x 2")	LN404-337 (3" x 3" x 1 1/2")
LN404-338 (3" x 3" x 2")
Reducing Vent Tee (HUB x HUBx HUB)
LN441-337 (3" x 3"x 1 1/2")	LN441-338 (3"x 3"x 2")
Return Bend (Hub x Hub)
LN700-xxx (1 1/2" - 12")
Sanitary Tee (HUB x HUB x HUB)
LN400-012 (1 1/4")	LN400-012L (1 1/4")	LN400-015 (1 1/2")	LN400-015L (1 1/2")
LN400-020 (2")	LN400-020L (2")	LN400-030 (3")	LN400-040 (4")
LN400-040L (4")	LN400-060 (6")	LN401-241 (2" x 1 1/2" x 1 1/2")	LN401-251 (2" x 2" x 1 1/2")
LN401-257 (2" x 1 1/2" x 2")	LN401-338 (3" x 3" x 2")
Sanitary Tee w/ Left Side Inlet (All HUB)
LN416-337 (3" x 3" x 3" x 1 1/2")	LN416-338 (3" x 3" x 3" x 2")	LN416-329 (3" x 3" x 2" x 2")	LN416-420 (4" x 4" x 4" x 2")
Sanitary Tee w/ Right Side Inlet (ALL HUB)
LN417-329 (3" x 3" x 2" x 2")	LN417-337 (3" x 3" x 3" x 1 1/2")	LN417-338 (3" x 3" x 3" x 2")	LN417-420 (4" x 4" x 4" x 2")
Sanitary Tee with R & L Side Inlets (All HUB)
LN418-337 (3" x 3" x 3" x 1 1/2" x 1 1/2")	LN418-338 (3" x 3" x 3" x 2" x 2")	LN418-420 (4" x 4" x 4" x 2" x 2")
Sewer Drain Adapter (HUB x HUB)
LN117-422 (4" x 3")
Slip Plug (Spg)
LN110S-015 (1 1/2")	LN110S-020 (2")	LN110S-025 (2 1/2")	LN110S-030 (3")
(LN110S-035 (3 1/2")	LN110S-040 (4")
Street Sanitary Tee (Spg x HUB x HUB)
LN403-015 (1 1/2")	LN403-020 (2")	LN403-030 (3")	LN403-040 (4")
Swivel Tray Plug (Spg x FIPT)
LN114-015 (1 1/2")
Swivel Tray Plug Adapter (HUB x FIPT)
LN112-015 (1 1/2")	LN112-212 (1 1/2" x 1 1/4")
Test Tee (HUB x HUB x Cleanout w/ Plug)
LN444X-015L (1 1/2")	LN444X-020L (2")	LN444X-030L (3")	LN444X-040L (4")
Test Tee (HUB x HUB x Cleanout)
LN444X-015 (1 1/2")	LN444X-020 (2")	LN444X-030 (3")	LN444X-040 (4")
Test Tee (HUB x HUB x FIPT)
LN445-015 (1 1/2")	LN445-020 (2")	LN445-030 (3")	LN445-040 (4")
LN445-015L (1 1/2")	LN445-020L (2")	LN445-030L (3")	LN445-040L (4")
Threaded Cap (FIPT)
LN135-015 (1 1/2")	LN135-020 (2")	LN135-030 (3")
Trap Adapter (HUB x SJ)
LN104P-012 (1 1/4")	LN104P-015 (1 1/2")	LN104P-212 (1 1/2" x 1 1/4")
Trap Adapter w/ Chrome Nut & Washer (HUB x SJ)
LN104C-020 (2")	LN104W-020 (2")	LN104C-212 (1 1/2 x 1 1/4")	LN104W-212 (1 1/2 x 1 1/4")
Trap Adapter w/ Chrome Nut & Washer (Spg x SJ)
LN103C-015 (1 1/2")	LN103W-015 (1 1/2")	LN103C-020 (2")	LN103W-020 (2")
LN103C-212 (1 1/2 x 1 1/4")	LN103W-212 (1 1/2 x 1 1/4")
Trap Adapter w/ Plastic Nut & Washer (Spg x SJ)
LN103X-012 (1 1/4")	LN103X-015 (1 1/2")	LN103X-020 (2")	LN103X-212 (1 1/2 x 1 1/4")
Trap Adapter w/ Plastic Nut (HUB x SJ)
LN104X-012 (1 1/4")	LN104X-015 (1 1/2")	LN104X-020 (2")	LN104X-212 (1 1/2" x 1 1/4")
Trap Adapter w/ Plastic Nut (Spg x SJ)
LN103P-012 (1 1/4")	LN103P-015 (1 1/2")	LN103P-212 (1 1/2" x 1 1/4")
Trap Adapter-Female (Hub x SJ) (without nut)
LN104-xxx (1 1/4" - 2")
Trap Adapter-Male (Spg x SJ) (without nut)
LN103-xxx (1 1/4" - 2")
Tray Plug Adapter (Spg x Female NPSM)
LN113-015 (1 1/2")
Two-Way Cleanout (HUB x HUB x HUB)
LN448-030 (3")	LN448-040 (4")
Vent Tee (HUB x HUB x HUB)
LN441-015 (1 1/2")	LN441-020 (2")	LN441-030 (3")	LN441-040 (4")
! Epoxy coated * 1 1/2" Offset § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Figure numbers may have one of the following optional prefixes used to identify retail packaging requirements: URP, U, UTP, USP, UPP, UP, UMP, UHP, UBP, PP, MPP, RP, MRP, RLN, LN, RS, MRR, RL, CPRLN, or RLR.
Fittings# [2] [4]	PVC	Viterra	ASTM D2665
P-Trap w/ Cleanout (H x H)
1 1/2" - 12" (LP707X-xxx)
# This product may be marked with an alternate trade name: Liansu. [2] XXX - size 012 - 1 1/4" 015 - 1 1/2" 020 - 2" 030 - 3" 040 - 4" 060 - 6" 080 - 8" 100 - 10" 120 - 12" 169 - 1 1/4" x 1 1/2" 212 - 1 1/2" x 1 1/4" 213 - 1 1/2" x 2" 241 - 2" × 1 1/2" × 1 1/2" or 2" × 1 1/2" × 1 1/2" × 1 1/2" 251 - 2" × 1 1/2" or 2" × 2" × 1 1/2" × 1 1/2" 253 - 2" x 3" 337 - 3" × 1 1/2" or 3" × 3" × 1 1/2" or 3" × 3" × 3" × 1 1/2" 338 - 3" × 2" or3" × 3" × 2" or 3" × 3" × 3" × 2" 342 - 3" x 4" 415 - 4" × 4" × 1/2" 420 - 4" × 2" or 4" × 4" × 2" or 4" × 4" × 4" × 2" 422 - 4" × 3" or 4" × 4" × 3" or 4" × 4" × 4" × 3" 532 - 6" × 4" or 6" × 6" × 4" or 6" × 6" × 6" × 4" 582 - 8" × 4" or 8" × 8" × 4" or 8" × 8" × 8" × 4" 585 - 8" × 6" or 8" × 8" × 6" or 8" × 8" × 8" × 6" 626 - 10" × 6" or 10" × 10" × 6" or 10" × 10" × 10" × 6" 628 - 10" × 8" or 10" × 10" × 8" or 10" × 10" × 10" × 8" 670 - 12" × 10" or 12" × 12" × 10" or 12" × 12" × 12" × 10" [4] Figure numbers may have the following prefix used to identify retail packaging requirements: R
Fittings# § [2] [4]	PVC	Viterra	ASTM D2665
(LP104R-015)1 1/2" x 1 1/2" x 1 1/2" x 1 1/4"
And 1-1/2×1-1/4 Washer (H×SLIP)	1-1/2" Trap Adapter-Female w/1-1/2 Plastic Nut & Washer
1/16 Bend (H x H)
1 1/2" - 12" (LP324-xxx)
1/16 Bend, Street (H x S)
1 1/2" - 12" (LP326-xxx)
1/4 Bend (H x H)
1 1/2" - 12" (LP300-xxx)
1/4 Bend w/ Low Heel Inlet (H x H x H)
1 1/2" - 12" (LP303-xxx)
1/4 Bend, Street (S x H)
1 1/2" - 12" (LP302-xxx)
1/4 Bend, Street w/ Low Heel Inlet (H x S x H)
1 1/2" - 12" (LP310-xxx)
1/6 Bend (H x H)
1 1/2" - 12" (LP319-xxx)
1/6 Bend, Street (H x S)
1 1/2" - 12" (LP320-xxx)
1/8 Bend (H x H)
1 1/2" - 12" (LP321-xxx)
1/8 Bend, Street (H x S)
1 1/2" - 12" (LP323-xxx)
2-Way Cleanout (ALL HUB)
3", 4", 6" (LP448-xxx)
Adapter Bushing (DWV SPIGOT x HUB)
1 1/2" - 12" (LP118-xxx)
Adapter Coupling (H x H)
1 1/2" - 12" (LP117-xxx)
Adjustable P-Trap w/ Plastic Nut (H x H)
1 1/2" - 2" (LP708P-xxx)
Cap (SOC)
1 1/2" - 12" (LP116-xxx)
Cleanout Plug (MPT)
1 1/2" - 12" (LP106-xxx)
Cleanout Tee w/ C.O. Plug (H x H)
1 1/2" - 12" (LP444X-xxx)
Closet Bend, Reducing (H x H)
3" x 4" (LP329-xxx)
Closet Bend, Street, Reducing(H x S)
3" x 4" (LP330-xxx)
Closet Flange (H)
1 1/2" - 12" (LP800-xxx)
Closet Flange w/ Adjustable Plastic Ring (H)
LP810P-040 (4")
Closet Flange, Reducing (SPIGOT)
1 1/2" - 12" (LP801-xxx)
Closet Flange, w/ Stop, Adj w/ Plastic Ring (H)
LP810S-040 (4")	LP810S-342 (3" x 4")
Closet Flange,w/ Adjustable w/ PVC Plastic Ring
LP820P-422 (4" x 3")
Combination Wye and 1/8 Bend (One Piece) (All HUB)
1 1/4" - 12" (LP501-xxx)
Combination Wye and 1/8 Bend (Two Piece) (All HUB)
1 1/4" - 12" (LP503-xxx)
Combo Wye and 1/8 Bend, Reducing (One Pc)(All HUB)
1 1/4" - 12" (LP502-xxx)
Combo Wye and 1/8 Bend, Reducing (Two Pc)(All HUB)
1 1/4" - 12" (LP504-xxx)
Coupling (H x H)
1 1/2" - 12" (LP100-xxx)
Dishwasher Wye (H x H x Hose Barb)
1 1/2" x 1 1/2" x 1/2" (LP601-209)
Double 1/4 Bend (H x H x H)
1 1/2" - 4" (LP327-xxx
Double Fixture Fitting (ALL HUB)
1 1/2" - 12" (LP500-xxx)
Double Sanitary Tee (ALL HUB)
1 1/2" - 12" (LP428-xxx)
Double Sanitary Tee, Reducing (ALL HUB)
LP429-xxx	2" x 2" x 1 1/2" x 1 1/2"	3" x 3" x 1 1/2" x 1 1/2"	3" x 3" x 2" x 2"
4" x 4" x 1 1/2" x 1 1/2"	4" x 4" x 2" x 2"	4" x 4" x 3" x 3"	6" x 6" x 3" x 3"
6" x 6" x 4" x 4"	8" x 8" x 4" x 4"	8" x 8" x 6" x 6"
Double Wye (ALL HUB)
1 1/2" - 12" (LP611-xxx)
Female Adapter (FPT x H)
1 1/2" - 12" (LP101-xxx)
Fitting Cleanout Adapter (S x FPT)
1 1/2" - 12" (LP105-xxx)
Fitting Cleanout Adapter w/ C.O. Plug (S x FPT)
1 1/2" - 12" (LP105X-xxx)
Flush Bushing (S x H)
1 1/2" - 12" (LP107-xxx)
Flush C.O. Tee (H x H x FPT)
1 1/2" - 12" (LP445-xxx)
Flush Closet Flange
1 1/2" - 12" (LP815-xxx)
Hub Adapter (H x S)
2" - 4" (LP123-xxx)
Hub Adapter (H x S)
LP123-213 (1 1/2" x 2")	LP123-253 (2" x 3")	LP123-342 (3" x 4")
Long Sweep 1/4 Bend (H x H)
1 1/2" - 12" (LP304-xxx)
Long Sweep 1/4 Bend w/ Low Heel Inlet (All HUB)
1 1/2" - 12" (LP307-xxx)
Long Sweep 1/4 Bend, Street (H x S)
1 1/2" - 12" (LP309-xxx)
Male Adapter (MPT x H)
1 1/2" - 12" (LP109-xxx)
No-Hub Adapter (S x H)
1 1/2" - 12" (LP119-xxx)
Offset Closet Flange,w/ Adjustable Metal Ring (H)!
LP820-040 (4")
P-Trap (H x H)
1 1/2" - 12" (LP706X-xxx)
P-Trap, Low Profile (H x H)
1 1/4" - 12" (LP710-xxx)
Pipe Increaser - Reducer (H x H)
(LP102-xxx)	2" x 1 1/2"	3" x 1 1/2"	3" x 2"
4" x 2"	4" x 3"	6" x 3"	6" x 4"
8" x 4"	8" x 6"	10" x 4"	10" x 6"
10" x 8"	12" x 6"	12" x 8"	12" x 10"
Reducing Double Wye (ALL HUB)
(LP612-xxx)	2" x 2" x 1 1/2" x 1 1/2"	3" x 3" x 1 1/2" x 1 1/2"	3" x 3" x 2" x 2"
4" x 4" x 2" x 2"	4" x 4" x 3" x 3"	6" x 6" x 3" x 3"	6" x 6" x 4" x 4"
8" x 8" x 4" x 4"	8" x 8" x 6" x 6"	10" x 10" x 4" x 4"	10" x 10" x 6" x 6"
10" x 10" x 8" x 8"	12" x 12" x 4" x 4"	12" x 12" x 6" x 6"	12" x 12" x 8" x 8"
12" x 12" x 10" x 10"
Reducing Sanitary Tee (ALL HUB)
LP401-415 (4" x 4" x 1/2")	2" x 1 1/2" x 1 1/2"	2" x 2" x 1 1/2"	2" x 1 1/2" x 2"
3" x 3" x 1 1/2"	3" x 3" x 2"	4" x 4" x 1 1/2"	4" x 4" x 2"
4" x 4" x 3"	6" x 6" x 3"	6" x 6" x 4"	8" x 8" x 4"
8" x 8" x 6"
Reducing Wye (ALL HUB)
(LP601-xxx)	2" x 1 1/2" x 1 1/2"	2" x 2" x 1 1/2"	2 x 1 1/2" x 2"
3" x 3" x 1 1/2"	3" x 3" x 2"	4" x 4" x 1 1/2"	4" x 4" x 2"
4" x 4" x 3"	6" x 6" x 2"	6" x 6" x 3"
Repair Coupling (H x H)
1 1/2" - 12" (LP130-xxx)
Return Bend (H x H)
1 1/2" - 12" (LP700-xxx)
Sanitary Tee (ALL HUB)
1 1/2" - 12" (LP400-xxx)
Sanitary Tee w/ Left Side Inlet (ALL HUB)
1 1/2" - 12" (LP416-xxx)
Sanitary Tee w/ R & L Side Inlets (ALL HUB)
1 1/2" - 12" (LP418-xxx)
Sanitary Tee w/ Right Side Inlet (ALL HUB)
1 1/2" - 12" (LP417-xxx)
Threaded Cap (FPT)
LP135-012 (1 1/4")
Trap Adapter - Female w/ Plastic Nut (H x SLIP)
(LP104P-xxx)	1 1/2" x 1 1/4"	1 1/2"
Trap Adapter - Male (S x SLIP)
LP103-030 (3")
Trap Adapter Cap (FPT)
LP112-015 (1 1/2")	LP112-020 (2")
Trap Adapter Cap B (FPT)
LP113-012 (1 1/4")	LP113-020 (2")	LP113-015 (1 1/2")
Trap Adapter Cap w/ Gasket
LP114-012 (1 1/4")	LP114-015 (1 1/2")	LP114-020 (2")
Trap Adapter Gasket
LP113R-012 (1 1/4")	LP113R-015 (1 1/2")	LP113R-020 (2")
Trap Adapter Male w/Chrome Nut & Washer (S x Slip)
LP103W-212 (1 1/2" x 1 1/4")
Vent Ell (H x H)
1 1/2" - 12" (LP331-xxx)
Vent Ell, Street (H x S)
1 1/4" - 12" (LP333 - xxx)
Vent Tee (ALL HUB)
1 1/2" - 12" (LP441-xxx)
Wye (ALL HUB)
1 1/2" - 12" (LP600-xxx)
! Epoxy coated # This product may be marked with an alternate trade name: Liansu. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [2] XXX - size 012 - 1 1/4" 015 - 1 1/2" 020 - 2" 030 - 3" 040 - 4" 060 - 6" 080 - 8" 100 - 10" 120 - 12" 169 - 1 1/4" x 1 1/2" 212 - 1 1/2" x 1 1/4" 213 - 1 1/2" x 2" 241 - 2" × 1 1/2" × 1 1/2" or 2" × 1 1/2" × 1 1/2" × 1 1/2" 251 - 2" × 1 1/2" or 2" × 2" × 1 1/2" × 1 1/2" 253 - 2" x 3" 337 - 3" × 1 1/2" or 3" × 3" × 1 1/2" or 3" × 3" × 3" × 1 1/2" 338 - 3" × 2" or3" × 3" × 2" or 3" × 3" × 3" × 2" 342 - 3" x 4" 415 - 4" × 4" × 1/2" 420 - 4" × 2" or 4" × 4" × 2" or 4" × 4" × 4" × 2" 422 - 4" × 3" or 4" × 4" × 3" or 4" × 4" × 4" × 3" 532 - 6" × 4" or 6" × 6" × 4" or 6" × 6" × 6" × 4" 582 - 8" × 4" or 8" × 8" × 4" or 8" × 8" × 8" × 4" 585 - 8" × 6" or 8" × 8" × 6" or 8" × 8" × 8" × 6" 626 - 10" × 6" or 10" × 10" × 6" or 10" × 10" × 10" × 6" 628 - 10" × 8" or 10" × 10" × 8" or 10" × 10" × 10" × 8" 670 - 12" × 10" or 12" × 12" × 10" or 12" × 12" × 12" × 10" [4] Figure numbers may have the following prefix used to identify retail packaging requirements: R
Fittings# § [3] [4]	PVC	Viterra	ASTM D2665
1/4 Bend (H x FIPT)
1 1/4" - 8" (LP301-xxx)
1/4 Bend (H x H)
1 1/4" (LP300-012)
1/4 Bend, Street (S x H)
1 1/4" (LP302-012)
1/8 Bend (H x H)
1 1/4" (LP321-012)
1/8 Bend, Street (H x S)
1 1/4" (LP323-012)
11-1/4° Elbow (H x H)
1 1/4" - 12" (LP305-xxx)
11-1/4° Elbow (S x H)
1 1/4" - 12" (LP306-xxx)
22.5° Elbow-Short Turn (H x H)
1 1/4" - 12" (LP324-xxxS)
45° Elbow-Short Turn (H x H)
1 1/4" - 12" (LP321-xxxS)
45° Elbow-Short Turn (H x S)
1 1/4" - 12" (LP323-xxxS)
90° Elbow-Short Turn (H x H)
1 1/4" - 12" (LP300-xxxS)
90° Elbow-Short Turn (H x S)
1 1/4" -12" (LP302-xxxS)
Adapter Coupling (S/D SxDWV H)
4" x 3" (LP117X-422)
Adapter, Soil Pipe (H x H)
2" - 4" (LP125-xxx)
Adjustable P-Trap w/ Plastic Nut (H x H)
1 1/4" (LP708P-012)
Cleanout Plug (MPT)
1 1/4" (LP106-012)
Closet Bend Street, Reducing w/Test Cap (S x H)
3" x 4" (LP330X-342)
Closet Flange (FPT)
4" x 3" (LP830-422)
Closet Flange (MPT)
4" x 3" (LP831-422)
Closet Flange w/ Adjustable Metal Ring (H)!
4" (LP811-040)	4" x 3" (LP811-422)
Closet Flange w/ Adjustable Metal Ring (S)!
4" (LP812-040)	4" x 3" (LP812-422)
Closet Flange w/ Adjustable Plastic Ring (H)
4" (LP810-040)
Closet Flange w/ Adjustable Plastic Ring (S)
4" (LP812P-040)	4" x 3" (LP812P-422)
Closet Flange w/ Stop (H)
4" x 3" (LP800S-422)
Closet Flange w/ Test Plate (H)
4" (LP800T-040)	4" x 3" (LP800T-422)
Closet Flange, w/ Stop, Adj w/ Plastic Ring (H)
4" x 3" (LP810S-422)
Combination Wye and 1/8 Bend Double Assembly (H)
1 1/4" - 12" (LP507-xxx)
Coupling (H x H)
1 1/4" (LP100-012)
Double Sanitary Tee w/ R & L Side Inlets (All HUB)
3" x 3" x 3" x 3" x 2" x 2" (LP439-338)	4" x 4" x 4" x 4" x 2" x 2" (LP439-420)
Double Sanitary Tee w/ Side Inlet (All HUB)
3" x 3" x 3" x 3" x 1 1/2" (LP438-337)	3" x 3" x 3" x 3" x 2" (LP438-338)	4" x 4" x 4" x 4" x 2" (LP438-420)
Double Sanitary Tee, Reducing (ALL HUB)
3" x 3" x 2" x 1 1/2" (LP429-323)
Double Sanitary Tee, Street, Reducing (SxHxHxH)
3" x 3" x 2" x 2" (LP431-338)
Female Adapter (FPT x H)
1 1/4" (LP101-012)
Fitting Cleanout Adapter (S x FPT)
1 1/4" (LP105-012)
Fitting Cleanout Adapter w/ C.O. Plug (S x FPT)
1 1/4" (LP105X-012)
Flush Bushing (S x H)
1 1/2" x 1 1/4" (LP107-212)	2" x 1 1/4" (LP107-250)
Flush C.O. Plug (MPT)
1 1/4" - 8" (LP110-xxx)
Flush C.O. Tee w/ C.O. Plug (H x H x FPT)
1 1/4" - 8" (LP445X-xxx)
Hub Adapter, Cast Iron, Increaser (CI SxDWV H)
4" x 3" (LP123R-422)
Long Sweep 1/4 Bend w/ High Heel Inlet (All HUB)
3" x 3" x 2" (LP308-338)
Male Adapter (MPT x H)
1 1/4" x 1 1/2" (LP109-169)	1 1/4" (LP109-012)
Offset Closet Flange,w/ Adjustable Metal Ring (H)!
4" x 3" (LP820-422)
P-Trap (H x SLIP)
1-1/4" - 2" (LP713-xxx)
P-Trap w/ union Joint (H x FPT)
1 1/4" - 12" (LP709-xxx)
Pipe Increaser-Reducer (H × H)
1 1/2" × 1 1/4" (LP102-212)
Reducer Bushing (Dishwasher Bushing) (S x FPT)
1 1/4" - 12" (LP108-xxx)
Reducing Female Adapter (H x FPT)
1 1/2" x 1 1/4" (LP101-212)
Reducing Sanitary Tee (ALL HUB)
1 1/2" x 1 1/2" x 1 1/4" (LP401-212)
Reducing Wye (ALL HUB)
6" - 12" (LP601-xxx)
Sanitary Tee (ALL HUB)
1 1/4" (LP400-012)
Sanitary Tee, Street (S x H x H)
1 1/4" - 12" (LP403-xxx)
Sanitary Tee, Street, Reducing (S x H x H)
1 1/4" - 12" (LP404-xxx)
Spigot Adapter, Cast Iron (CI H x DWV H)
1 1/4" - 12" (LP122-xxx)
Threaded Cap (FPT)
1 1/4" - 8" (LP135-xxx)
Trap Adapter - Female (H x SLIP)
1 1/4" - 2" (LP104-xxx)
Trap Adapter - Female w/Plastic Nut (H x SLIP)
1 1/4" (LP104P-012)	2" (LP104P-020)
Trap Adapter Plug (H x NPSM Thread)
1 1/2" (LP128-015)
Trap Adapter Plug (S x NPSM Thread)
1 1/2" (LP129-015)
Trap Adapter-Female w/Brass Nut (H x SLIP)
1 1/2" x 1 1/4" (LP104B-212)
Trap Adapter-Female w/Chrome Nut & Washer (HxSLIP)
1 1/2" (LP104W-015)	1 1/2" x 1 1/4" (LP104W-212)	2" (LP104W-020)
Trap Adapter-Female w/Plastic Nut & Washer(HxSLIP)
1-1/2" (LP104X-015)	1-1/2 x 1-1/4" (LP104X-212)	1 1/4" (LP104X-012)	2" (LP104X-020)
Trap Adapter-Male (S x SLIP)
1 1/4" - 2" (LP103-xxx)
Trap Adapter-Male w/ Plastic Nut (S x SLIP)
1 1/4" - 2" (LP103P-xxx)
Trap Adapter-Male w/ Plastic Nut (S x SLIP)@
1 1/4" - 2" (LP103R-xxx)
Trap Adapter-Male w/Chrome Nut & Washer (S x SLIP)
1 1/4" - 2" (LP103W-xxx)
Trap Adapter-Male w/Plastic Nut & Washer(S x SLIP)
1 1/4" - 2" (LP103X-xxx)
Trap Elbow (for use with Traps only) (H x S)
1 1/4" - 12" (LP335-xxx)
Tube End Cleanout (H x FPT)
1 1/4" -12" (LP905-xxx)
Tube End Cleanout (H x Gasket Plug)
1 1/4" - 12" (LP905X-xxx)
Vent Ell (H x H)
1 1/4" (LP331-012)
Vent Ell, Street (H x S)
1 1/4" (LP333-012)
Washer Box P-Trap (H x H)
2" (LP716-020)
Wye (ALL HUB)
1 1/4" (LP600-012)
Wye, Street (S x H x H)
1 1/4" - 12" (LP602-xxx)
Wye, Street, Reducing (S x H x H)
1 1/4" - 12" (LP603-xxx)
! Epoxy coated @ 1 1/2” & 1 1/4" washers # This product may be marked with an alternate trade name: Liansu. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [3] Product is authorized to bear the cNSF and/or the cNSFus Mark except for 1/4, 3/8, 3-1/2 and 5 in. fittings. [4] Figure numbers may have the following prefix used to identify retail packaging requirements: R
Fittings# [1]	PVC	Viterra	ASTM D3034
1/16 Bend (H × H)
LSW324-030 (3")	LSW324-040 (4")	LSW324-060 (6")	LSW324-080 (8")
1/16 Bend, Street (S ×H)
LSW326-030 (3")	LSW326-040 (4")	LSW326-060 (6")	LSW326-080 (8")
1/4 Bend (H × H)
LSW300-030 (3")	LSW300-040 (4")	LSW300-060 (6")	LSW300-080 (8")
1/4 Bend, Street (S × H)
LSW302-040 (4")	LSW302-060 (6")	LSW302-080 (8")
1/8 Bend (H × H)
LSW321-020 (2")	LSW321-030 (3")	LSW321-040 (4")	LSW321-060 (6")
LSW321-080 (8")
1/8 Bend, Street (S ×H)
LSW323-030 (3")	LSW323-040 (4")	LSW323-060 (6")	LSW323-080 (8")
Adapter Bushing (DWV Spigot × HUB)
LP118-030 (3" x 3")	LP118-040 (4" x 4")	LP118-060 (6" x 6")
Adapter Bushing (Sewer SPGxDWV Hub)
LP117X-337 (3" x 2")	LP117X-338 (3" x 2")	LP117X-437 (4" x 2")	LP117X-420 (4" x 2")
LP117X-422 (4" x 3")	LP117X-040 (4" x 4")	LP117X-532 (6" x 4")	LP117X-060 (6" x 6")
Adapter Coupling (Sewer HUB × DWV HUB)
LP117-338 (3" x 2")	LP117-422 (4" x 3")	LP117-040 (4" x 4")	LP117-532 (6" x 4")
LP117-060 (6" x 6")
Cap (HUB)
LSW116-030 (3")	LSW116-040 (4")	LSW116-060 (6")	LSW116-080 (8")
Cleanout Plug (MPT)
LSW106-030 (3")	LSW106-040 (4")	LSW106-060 (6")	LSW106-080 (8")
Cleanout Tee (H × H × FPT)
LSW445-040 (4")
Coupling (H × H)
LSW100-030 (3")	LSW100-040 (4")	LSW100-060 (6")	LSW100-080 (8")
Downspout Adapter (DOWNSPOUTxSEWER HUB,HxH)
LSW217-0233 (2" x 3" x 3")	LSW217-0234 (2" x 3" x 4")	LSW217-0343 (3" x 3")	LSW217-0344 (3" x 4" x 4")
Drain Grate (SPG)
LSW299-030 (3")	LSW299-040 (4")	LSW299-060 (6")	LSW299-080 (8")
Extended Reducer Bushing (SPGxH)
LSW117XE-532 (6" x 4")	LSW117XE-582 (8" x 4")	LSW117XE-585 (8" x 6")
Female Adapter (FPT × H)
LSW101-030 (3")	LSW101-040 (4")	LSW101-060 (6")	LSW101-080 (8")
Fitting Cleanout Adapter (S × FPT)
LSW105-030 (3")	LSW105-040 (4")	LSW105-060 (6")	LSW105-080 (8")
Fitting Cleanout Adapter W/ C.O. Plug (S × FPT)
LSW105X-030 (3")	LSW105X-040 (4")	LSW105X-060 (6")
Flush Downspout Adapater(DOWNSPOUTxSEWER HUB, HxH)
LSW218-0233 (2" x 3" x 3")	LSW218-0234 (2" x 3" x 4")	LSW218-0344 (3" x 4" x 4")	LSW218-0466 (4" x 6" x 6")
Long Sweep 1/4 Bend (H × H)
LSW304-030 (3")	LSW304-040 (4")	LSW304-060 (6")	LSW304-080 (8")
Long Sweep 1/4 Bend, Street (S ×H )
LSW309-030 (3")	LSW309-040 (4")
Male Adapter (MPT × H)
LSW109-030 (3")	LSW109-040 (4")
Pipe Increaser-Reducer (H × H)
LSW102-338 (3" x 2")	LSW102-422 (4" x 3")	LSW102-532 (6" x 4")	LSW102-582 (8" x 4")
Reducing Bushing (S × H)
LSW107-338 (3" x 2")	LSW107-422 (4" x 3")
Reducing Double Wye (All Hub)
LSW612-532 (6" x 4")
Reducing Sanitary Tee (All Hub)
LSW400-532 (6" x 4")
Reducing Tee (All Hub)
LSW441-422 (4" x 3")	LSW441-532 (6" x 4")	LSW441-582 (8" x 4")	LSW441-585 (8" x 6")
Reducing Wye (All Hub)
LSW601-338 (3" x 2")	LSW601-422 (4" x 3")	LSW601-532 (6" x 4")	LSW601-582 (8" x 4")
LSW601-585 (8" x 6")
Repair Coupling (H × H)
LSW130-040 (4")	LSW130-060 (6")
Sanitary Tee (ALL HUB)
LSW400-030 (3")	LSW400-040 (4")	LSW400-060 (6")	LSW400-080 (8")
Tee (All Hub)
LSW441-030 (3")	LSW441-040 (4")	LSW441-060 (6")	LSW441-080 (8")
Wye (All Hub)
LSW600-030 (3")	LSW600-040 (4")	LSW600-060 (6")	LSW600-080 (8")
Wye, Street (S × H × H)
LSW602-040 (4")
# This product may be marked with an alternate trade name: Liansu. [1] Figure numbers may have one of the following optional prefixes used to identify retail packaging requirements: URP, U, UTP, USP, UPP, UP, UMP, UHP, UBP, PP, MPP, RP, MRP, RLN, LN, RS, MRR, RL, CPRLN, or RLR.
Fittings¢ [1]	ABS	Viterra	CSA B181.1
22 1/2° Elbow (HUB x HUB)
LN324-015 (1 1/2")	LN324-020 (2")	LN324-030 (3")	LN324-040 (4")
LN324-060 (6")
22 1/2° Street Elbow (HUB x Spg)
LN326-015 (1 1/2")	LN326-020 (2")	LN326-030 (3")	LN326-040 (4")
45° Double Wye (All HUB)
LN611-015 (1 1/2")	LN611-020 (2")	LN611-030 (3")	LN611-030L (3")
LN611-040 (4")
45° Elbow (HUB x HUB)
LN321-012 (1 1/4")	LN321-015 (1 1/2")	LN321-020L (2")	LN321-030L (3")
LN321-040 (4")	LN321-060 (6")
45° Elbow Long-Turn (HUB x HUB)
LN321-020 (2")	LN321-030 (3")
45° Elbow-Short Turn (HUB x HUB)
LN321-015S (1 1/2")	LN321-020S (2")	LN321-030S (3")	LN321-040S (4")
45° Reducing Double Wye (All HUB)
LN612-251 (2" x 2" x 1 1/2" x 1 1/2")	LN612-337 (3" x 3" x 1 1/2" x 1 1/2")	LN612-338 (3" x 3" x 2" x 2")	LN612-420 (4" x 4" x 2" x 2")
LN612-422 (4" x 4" x 3" x 3")	LN612-532 (6" x 6" x 4" x 4")
45° Reducing Street Wye (Spg x HUB x HUB)
LN603-251 (2" x 2" x 1 1/2")	LN603-337 (3" x 3" x 1 1/2")	LN603-338 (3" x 3" x 2")	LN603-420 (4" x 4" x 2")
LN603-422 (4" x 4" x 3")
45° Reducing Wye (HUB x HUB x HUB)
LN601-251L (2" x 2" x 1 1/2")	LN601-337L (3" x 3" x 1 1/2")	LN601-338L (3" x 3" x 2")	LN601-419 (4" x 4" x 1 1/2")
LN601-420L (4" x 4" x 2")	LN601-422L (4" x 4" x 3")	LN601-530 (6" x 6" x 3")
45° Street Elbow (HUB x Spg)
LN323-012 (1 1/4")	LN323-015 (1 1/2")	LN323-020L (2")	LN323-030L (3")
LN323-040 (4")	LN323-060 (6")
45° Street Elbow Long-Turn (HUB x Spg)
LN323-020 (2")	LN323-030 (3")
45° Street Elbow-Short Turn (HUB x Spg)
LN323-015S (1 1/2")	LN323-020S (2")	LN323-030S (3")	LN323-040S (4")
45° Street Wye (Spg x HUB x HUB)
LN602-015 (1 1/2")	LN602-020 (2")	LN602-030 (3")	LN602-040 (4")
45° Wye (HUB x HUB x HUB)
LN600-012 (1 1/4")	LN600-015 (1 1/2")	LN600-015L (1 1/2")	LN600-020 (2")
LN600-020L (2")	LN600-030 (3")	LN600-030L (3")	LN600-040 (4")
LN600-040L (4")	LN600-060 (6")	LN601-241 (2" x 1 1/2" x 1 1/2")	LN601-251 (2" x 2" x 1 1/2")
LN601-337 (3" x 3" x 1 1/2")	LN601-338 (3" x 3" x 2")	LN601-420 (4"x 4" x 2")	LN601-422 (4" x 4" x 3")
LN601-532 (6" x 6" x 4")
60° Elbow (HUB x HUB)
LN319-040 (4")	LN319-030 (3")	LN319-020 (2")	LN319-015 (1 1/2")
60° Street Elbow (HUB x Spg)
LN320-015 (1 1/2")	LN320-020 (2")	LN320-030 (3")	LN320-040 (4")
90° Double Elbow (HUB x HUB x HUB)
LN327-015 (1 1/2")	LN327-020 (2")	LN327-030 (3")	LN327-040 (4")
LN327-241 (2" x 1 1/2" x 1 1/2")
90° Elbow (HUB x HUB)
LN300-012 (1 1/4")	LN300-015 (1 1/2")	LN300-020 (2")	LN300-030 (3")
LN300-040 (4")	LN300-060 (6")
90° Elbow w/ Low Heel Inlet (HUB x HUB x HUB)
LN303-337 (3" x 3" x 1 1/2")	LN303-338 (3" x 3" x 2")	LN303-420 (4" x 4" x 2")
90° Elbow w/ Side Inlet (HUB x HUB x HUB)
LN300S-337 (3" x 3" x 1 1/2")	LN300S-338 (3" x 3" x 2")
90° Elbow-Short Turn (HUB x HUB)
LN300-012S (1 1/4")	LN300-015S (1 1/2")	LN300-020S (2")	LN300-030S (3")
LN300-040S (4")	LN300-060S (6")
90° Long Sweep Elbow (HUB x HUB)
LN304-012 (1 1/4")	LN304-015 (1 1/2")	LN304-020 (2")	LN304-030 (3")
LN304-040 (4")
90° Long Sweep Elbow, Street (HUB x SPG)
LN309-015 (1 1/2")	LN309-020 (2")	LN309-030 (3")	LN309-040 (4")
90° Reducing Closet Elbow (HUB x HUB)
LN329-422 (4" x 3")
90° Reducing Closet St. Elbow w/ Test Cap(HUBxSpg)
LN330X-342 (3" x 4")	LN330X-422 (4" x 3")
90° Reducing Closet Street Elbow (HUB x Spg)
LN330-342 (3" x 4")	LN330-422 (4" x 3")
90° Street Elbow (HUB x Spg)
LN302-012 (1 1/4")	LN302-015 (1 1/2")	LN302-020 (2")	LN302-030 (3")
LN302-040 (4")	LN302-060 (6")
90° Street Elbow w/Low Heel Inlet (HUBxSpgxHUB)
LN310-338 (3" x 3" x 2")
90° Street Elbow-Short Turn (HUB x Spg)
LN302-015S (1 1/2")	LN302-020S (2")	LN302-030S (3")	LN302-040S (4")
90° Vent Elbow (HUB x HUB)
LN331-012 (1 1/4")	LN331-015 (1 1/2")	LN331-020 (2")	LN331-030 (3")
LN331-040 (4")
ABS-Copper Adapter (HUB x SJ)
LN120-015 (1 1/2")	LN120-212 (1 1/2" x 1 1/4")
Adapter Bushing (DWV Spg x S&D HUB)
LN118-030 (3")	LN118-040 (4")
Cap (FIPT)
LN116F-015 (1 1/2")
Cap (HUB)
LN116-012 (1 1/4")	LN116-015 (1 1/2")	LN116-020 (2")	LN116-030 (3")
LN116-040 (4")	LN116-060 (6")
Cast Iron Adapter (HUB x HUB)
LN125-040 (4")
Cast Iron HUB Adapter (Spg x HUB)
LN124-020 (2")	LN124-040 (4")	LN124-422 (4" x 3")
Cleanout Adapter (Spg x FIPT)
LN105-012 (1 1/4")	LN105-015 (1 1/2")	LN105-020 (2")	LN105-030 (3")
LN105-040 (4")	LN105-060 (6")
Cleanout Adapter w/ Plug (Spg x Cleanout w/ Plug)
LN105X-012 (1 1/4")	LN105X-015 (1 1/2")	LN105X-020 (2")	LN105X-030 (3")
LN105X-040 (4")	LN105X-060 (6")
Cleanout Plug (MIPT)
LN106-012 (1 1/4")	LN106-015 (1 1/2")	LN106-020 (2")	LN106-025 (2 1/2")
LN106-030 (3")	LN106-035 (3 1/2")	LN106-040 (4")
Cleanout Wye (HUB x HUB x FIPT)
LN604-015 (1 1/2")
Closet Flange (FIPT)
LN830-422 (4 x 3")
Closet Flange (HUB)
LN800-040 (4" x 4")	LN800-422 (4" x 3")	LN800-422L (4" x 3")
Closet Flange (MIPT)
LN831-422 (4" x 3")
Closet Flange w/ Adjustable Metal Ring (H)!
LN811-040 (4")	LN811-422 (4" x 3")
Closet Flange w/ Adjustable Metal Ring (S)!
LN812-040 (4")	LN812-422 (4" x 3")
Closet Flange w/ Adjustable Plastic Ring (HUB)
LN810P-422 (4" × 3")	LN810P-040 (4" x 4")
Closet Flange w/ Adjustable Plastic Ring (Spg)
LN812P-040 (4" x 4")	LN812P-422 (4" x 3")
Closet Flange w/ Knockout & Pipe Stop (HUB)
LN815K-040 (4" x 4"/ 4" x 3")
Closet Flange w/ Knockout Test Plug (Hub)
LN800T-040 (4" x 4")	LN800T-422 (4" x 3")	LN800T-422L (4" x 3")
Closet Flange w/ Pipe Stop (HUB)
LN815PS-040 (4" x 4" / 4" x 3")
Closet Flange w/ Ring-Pull Test Plug (HUB)
LN800R-040 (4" x 4")	LN800R-422 (4" x 3")	LN800R-422L (4" x 3")
Closet Flange w/ Screw Test Plug (HUB)
LN800T-040C (4")	LN800T-422C (4" x 3")	LN800T-422CL (4" x 3")
Closet Flange, w/ Adjustable w/ PVC Plastic Ring*
LN820P-422 (4" x 3")
Combination Wye & 1/8 Bend (1 Piece)(HUBxHUBxHUB)
LN501-015 (1 1/2")	LN501-020 (2")	LN501-030 (3")	LN501-040 (4")
Combination Wye & 1/8 Bend(Two Piece)(HUBxHUBxHUB)
LN503-020 (2")
Counter Sunk Plug (MIPT)
LN106C-015 (1 1/2")	LN106C-020 (2")	LN106C-030 (3")	LN106C-040 (4")
Coupling (HUB x HUB)
LN100-012 (1 1/4")	LN100-015 (1 1/2")	LN100-020 (2")	LN100-030 (3")
LN100-040 (4")	LN100-060 (6")
Dishwasher Adapter (Sp×Barb)
LN610-015 (1-1/2")
Dishwasher Y (Hub)
LN601-209 (1-1/2" × 1-1/2" × 1/2")	LN601-210 (1-1/2" × 1-1/2" × 3/4")
Double Fixture Fitting (All HUB)
LN500-020 (2")	LN500-030 (3")	LN500-241 (2" x 1 1/2" x 1 1/2" x 1-1/2")	LN500-251 (2" x 2" x 1 1/2" x 1 1/2")
LN500-257 (2" x 1 1/2" x 2" x 2")	LN500-338 (3" x 2" x 3" x 3")
Double Sanitary Tee (All HUB)
LN428-015 (1 1/2")	LN428-020 (2")	LN428-030 (3")	LN428-040 (4")
LN429-337 (3" x 3" x 1 1/2" x 1 1/2")
Double Sanitary Tee w/ R & L Side Inlet (All HUB)
LN439-338 (3" x 3" x 3" x "3 x 2" x 2")
Double Sanitary Tee w/ Side Inlet (All HUB)
LN438-337 (3" x 3" x 3" x 3" x1 1/ 2")	LN438-338 (3" x 3" x 3" x 3" x 2")	LN438-420 (4" x 4" x 4" x 4" x 2")
Drum Trap w/ Cleanout
LN702X-363 (3" x 6" x 1 1/2")
Expansion Joint (HUB x HUB)
LNH119-015 (1 1/2")	LNH119-020 (2")	LNH119-030 (3")	LNH119-040 (4")
Expansion Joint (HUB x Spg)
LNH119S-030 (3")
Female Adapter (HUB x FIPT)
LN101-012 (1 1/4")	LN101-015 (1 1/2")	LN101-020 (2")	LN101-030 (3")
LN101-040 (4")	LN101-060 (6")
Flush Adapter (Spg x FIPT)
LN108-209 (1 1/2" x 1/2")	LN108-210 (1 1/2" x 3/4")	LN108-212 (1 1/2" x 1 1/4")	LN108-251 (2" x 1 1/2")
LN108-337 (3" x 1 1/2")	LN108-338 (3" x 2")	LN108-422 (4" x 3")
Flush Bushing (Spg x HUB)
LN107-212 (1 1/2" x 1 1/4")	LN107-251 (2" x 1 1/2")	LN107-337 (3" x 1 1/2")	LN107-338 (3" x 2")
LN107-419 (4" x 1 1/2")	LN107-420 (4" x 2")	LN107-422 (4" x 3")	LN107-532 (6" x 4")
Flush C.O. Plug (MPT)
LN110-020 (2")	LN110-030 (3")	LN110-040 (4")
Flush Closet Flange (Inside 4", Outside 3")
LN815-040 (4" x 4" / 4" x 3")
Hub Adapter Cast Iron (HUB x SJ)
LN123-020 (2")	LN123-030 (3")	LN123-040 (4")
Hub Adapter Cast Iron Increaser (HUBx SJ)
LN123R-213 (1 1/2" x 2")	LN123R-342 (3" x 4")
LA Pattern P-Trap w/Union & Plastic Nut (HUB x SJ)
LN711M-015 (1 1/2")	LN711M-212 (1 1/2" x 1 1/4")
Male Adapter (HUB x MIPT)
LN109-015 (1 1/2")	LN109-020 (2")	LN109-030 (3")	LN109-040 (4")
LN109-012 (1 1/4")	LN109-212 (1 1/2" x 1 1/4")
Male Adapter (Spg x MIPT)
LN111-012 (1 1/4")	LN111-015 (1 1/2")	LN111-020 (2")	LN111-030 (3")
LN111-040 (4")	LN111-212 (1 1/2" x 1 1/4")
No-Hub Adapter (Spg x HUB)
LN119-020 (2")	LN119-030 (3")	LN119-040 (4")	LN119-251 (2" x 1 1/2")
LN119-422 (4" x 3")
Offset Closet Flange,w/ Adjustable Metal Ring (H)
LN820-040 (4")	LN820-422 (4" x 3")
P-Trap (Hub x Hub x Cleanout)
LN707X-015 (1 1/2")	LN707X-020 (2")
P-Trap (Hub x Hub)
LN706X-015 (1 1/2")	LN706X-020 (2")	LN706X-030 (3")	LN706X-040 (4")
P-Trap w/ Union & C/O (Hub x Hub x C/O)
LN712-015 (1 1/2")
P-Trap w/ Union Joint (Hub x Hub)
LN708P-012 (1 1/4")	LN708P-015 (1 1/2")	LN708P-020 (2")
Pipe Increaser-Reducer (HUB x HUB)
LN102-212 (1 1/2" x 1 1/4")	LN102-251 (2" x 1 1/2")	LN102-337 (3" x 1-1/2")	LN102-338 (3" x 2")
LN102-419 (4" x 1 1/2")	LN102-420L (4" x 2")	LN102-422L (4" x 3")
Pivoting P-Trap w/ Plug (HUB×HUB×CLEANOUT W/PLUG)
LN707S-015 1 1/2"
Plug with Gasket (MIPT)
LN106R-012 (1 1/4")	LN106R-015 (1 1/2")	LN106R-020 (2")	LN106R-025 (2 1/2")
LN106R-030 (3")	LN106R-035 (2 1/2")	LN106R-040 (4")	LN106R-060 (6")
Red. Comb. Wye & 1/8 Bend(1 Piece)(HUBxHUBxHUB)
LN502-241 (2" x 1 1/2" x 1 1/2")	LN502-251 (2" x 2" x 1 1/2")	LN502-257 (2" x 1 1/2" x 2")	LN502-337 (3" x 3" x 1 1/2")
LN502-338 (3" x 3" x 2")	LN502-420 (4" x 4" x 2")	LN502-422 (4" x 4" x 3")
Reducing Closet Flange (Spg)
LN801-422 (4" x 3")
Reducing Coupling (HUB x HUB)
LN102-420 (4" x 2")	LN102-422 (4" x 3")
Reducing Double Sanitary Tee (All HUB)
LN429-251 (2" x 2" x 1 1/2" x 1 1/2")	LN429-323 (3" x 3" x 2" x 1 1/2")	LN429-337 (3" x 3" x 1 1/2" x 1 1/2")	LN429-338 (3" x 3" x 2" x 2")
LN429-420 (4" x 4" x 2" x 2")	LN429-422 (4" x 4" x 3" x 3")
Reducing Sanitary Tee (HUB x HUB x HUB)
LN401-212 (1 1/2" x 1 1/2" x 1 1/4")	LN401-222 (1 1/2" x 1 1/4" x 1 1/4")	LN401-225 (11/2" x 1 1/4" x 1 1/2")	LN401-241L (2" x 1 1/2" x 1 1/2")
LN401-251L (2" x 2" x 1 1/2")	LN401-257L (2" x 1 1/2" x 2")	LN401-337 (3" x 3" x 1 1/2")	LN401-338L (3" x 3" x 2")
LN401-419 (4" x 4" x 1 1/2")	LN401-420 (4" x 4" x 2")	LN401-422 (4" x 4" x 3")	LN401-532 (6" x 6" x 4")
Reducing Street Sanitary Tee (Spg x HUB x HUB)
LN404-241 (2" x 1 1/2" x 1 1/2")
Reducing Street Sanitary Tee (Spg x HUB x HUB)
LN404-251 (2" x 2" x 1 1/2")
Reducing Street Sanitary Tee (Spg x HUB x HUB)
LN404-337 (3" x 3" x 1 1/2")
Reducing Street Sanitary Tee (Spg x HUB x HUB)
LN404-257 (2" x 1 1/2" x 2")	LN404-338 (3" x 3" x 2")
Reducing Vent Tee (HUB x HUB x HUB)
LN441-337 (3" x 3" x 1 1/2")	LN441-338 (3" x 3" x 2")
Repair Coupling (HUB x HUB)
LN130-015 (1 1/2")	LN130-020 (2")	LN130-030 (3")	LN130-040 (4")
Return Bend (Hub x Hub x Cleanout w/ Plug)
LN701-xxx (1 1/2" - 12")
Return Bend (Hub x Hub)
LN700-xxx (1 1/2" - 12")
Sanitary Tee (HUB x HUB x HUB)
LN400-012 (1 1/4")	LN400-012L (1 1/4")	LN400-015 (1 1/2")	LN400-015L (1 1/2")
LN400-020 (2")	LN400-020L (2")	LN400-030 (3")	LN400-040 (4")
LN400-040L (4")	LN400-060 (6")	LN401-241 (2" x 1 1/2" x 1 1/2")	LN401-251 (2" x 2" x 1 1/2")
LN401-257 (2" x 1 1/2" x 2")	LN401-338 (3" x 3" x 2")
Sanitary Tee w/ Left Side Inlet (All HUB)
LN416-329 (3" x 3" x 2" x 2")	LN416-337 (3" x 3" x 3" x 1 1/2")	LN416-338 (3" x 3" x 3" x 2")	LN416-420 (4" x 4" x 4" x 2")
Sanitary Tee w/ Right Side Inlet (All Hub)
LN417-329 (3" x 3" x 2" x 2")	LN417-337 (3" x 3" x 3" x 1 1/2")	LN417-338 (3" x 3" x 3" x 2")	LN417-420 (4" x 4" x 4" x 2")
Sanitary Tee with R & L Side Inlets (All HUB)
LN418-337 (3" x 3" x 3" x 1 1/2" x 1 1/2")	LN418-338 (3" x 3" x 3" x 2" x 2")	LN418-420 (4" x 4" x 4" x 2" x 2")
Sewer Drain Adapter (HUB x HUB)
LN117-422 (4" x 3")
Sewer Pipe Adapter Coupling (Sewer HUBxSCH 40 HUB)
LN117S-040 (4" x 4")	LN117S-422 (4" x 3")
Slip Joint Nut (FIPT)
LN115-015 (1 1/2")
Slip Plug (Spg)
LN110S-015 (1 1/2")	LN110S-020 (2")	LN110S-025 (2 1/2")	LN110S-030 (3")
LN110S-035 (3 1/2")	LN110S-040 (4")
Snap-In Cleanout w/ Plug
LN106W-040 (4")	LN106W-030 (3")
Street Sanitary Tee (Spg x HUB x HUB)
LN403-015 (1 1/2")	LN403-020 (2")	LN403-030 (3")	LN403-040 (4")
Swivel Tray Plug (Spg x FIPT)
LN114-015 (1 1/2")
Swivel Tray Plug Adapter (HUB x FIPT)
LN112-015 (1 1/2")	LN112-212 (1 1/2" x 1 1/4")
Test Tee (HUB x HUB x Cleanout w/ Plug)
LN444X-015L (1 1/2")	LN444X-020L (2")	LN444X-030L (3")	LN444X-040L (4")
LN444X-427 (4"x 3" x 4")
Test Tee (HUB x HUB x Cleanout)
LN444X-015 (1 1/2")	LN444X-020 (2")	LN444X-030 (3")	LN444X-040 (4")
Test Tee (HUB x HUB x FIPT)
LN445-015 (1 1/2")	LN445-015L (1 1/2")	LN445-020 (2")	LN445-020L (2")
LN445-030 (3")	LN445-030L (3")	LN445-040 (4")	LN445-040L (4")
LN445-427 (4" x 3" x 4")
Threaded Cap (FIPT)
LN135-015 (1 1/2")	LN135-020 (2")	LN135-030 (3")
Trap Adapter w/ Plastic Nut & Washer (Spg x SJ)
LN103X-012 (1 1/4")	LN103X-015 (1 1/2")	LN103X-020 (2")	LN103X-212 (1 1/2" x 1-1/4")
Trap Adapter w/ Chrome Nut & Washer (HUB x SJ)
LN104C-020 (2")	LN104W-020 (2")	LN104C-212 (1 1/2" x 1 1/4")	LN104W-212 (1 1/2 x 1 1/4")
Trap Adapter w/ Chrome Nut & Washer (Spg x SJ)
LN103W-015 (1 1/2")	LN103C-020 (2")	LN103W-020 (2")	LN103C-212 (1 1/2 x 1 1/4")
LN103W-212 (1 1/2 1 1/4")
Trap Adapter w/ Plastic Nut & Washer (HUB x SJ)
LN104X-012 (1 1/4")	LN104X-015 (1 1/2")	LN104X-020 (2")	LN104X-212 (1 1/2 x 1 1/4")
Trap Adapter w/ Plastic Nut (HUB x SJ)
LN104P-012 (1 1/4")	LN104P-015 (1 1/2")	LN104P-212 (1 1/2" x 1 1/4")
Trap Adapter w/ Plastic Nut (Spg x SJ)
LN103P-012 (1 1/4")	LN103P-015 (1 1/2")	LN103P-212 (1 1/2" x 1 1/4")
Trap Adapter-Female (Hub x SJ) (without nut)
LN104-xxx (1 1/4" - 2")
Trap Adapter-Male (Spg x SJ) (without nut)
LN103-xxx (1 1/4" - 2")
Tray Plug Adapter (Spigot x Female NPSM)
LN113-015 (1 1/2")
Tray Plug Adapter - Spigot
LN130X-015 (1 1/2")	LN900-015 (1 1/2")
Two-Way Cleanout (HUB x HUB x HUB)
LN448-040 (4")	LN448-030 (3")
Union (HUB x HUB)
LN126-015 (1 1/2")	LN126-020 (2")	LN126-030 (3")	LN126-040 (4")
Vent Tee (HUB x HUB x HUB)
LN441-015 (1 1/2")	LN441-020 (2")	LN441-030 (3")	LN441-040 (4")
! Epoxy coated * 1 1/2" Offset ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Figure numbers may have one of the following optional prefixes used to identify retail packaging requirements: URP, U, UTP, USP, UPP, UP, UMP, UHP, UBP, PP, MPP, RP, MRP, RLN, LN, RS, MRR, RL, CPRLN, or RLR.
Fittings# ¢ [3] [4]	MLTPL	Viterra	CSA B181.2
1/4 Bend (H x FIPT)
1 1/4" - 8" (LP301-xxx)
1/4 Bend (H x H)
1 1/4" (LP300-012)
1/4 Bend w/ High Heel Inlet (All HUB)
3" x 3" x 1 1/2" (LP303H-337)
1/4 Bend w/ High Heel Inlet (All HUB)
3" x 3" x 2" (LP303H-338)
1/4 Bend with Side Inlet (ALL HUB)
3" x 3" x 1 1/2" (LP300S-337)
1/4 Bend, Reducing (H x H)
1 1/4" - 12" (LP300R-xxx)
1/4 Bend, Street (S x H)
1 1/4" (LP302-012)
1/8 Bend (H x H)
1 1/4" (LP321-012)
1/8 Bend, Street (H x S)
1 1/4" (LP323-012)
11-1/4° Elbow (H x H)
1 1/4" - 12" (LP305-xxx)
11-1/4° Elbow (S x H)
1 1/4" - 12" (LP306-xxx)
22.5° Elbow-Short Turn (H x H)
1 1/4" - 12" (LP324-xxxS)
45° Elbow-Short Turn (H x H)
1 1/4" - 12" (LP321-xxxS)
45° Elbow-Short Turn (H x S)
1 1/4" - 12" (LP323-xxxS)
90° Elbow-Short Turn (H x H)
1 1/4" - 12" (LP300-xxxS)
90° Elbow-Short Turn (H x S)
1 1/4" -12" (LP302-xxxS)
Adapter Coupling (S/D SxDWV H)
4" x 3" (LP117X-422)
Adapter, Schedule 40 to Schedule 30 (H x H)
3" (LP117S-030)
Adapter, Soil Pipe (H x H)
2" - 4" (LP125-xxx)
Adapter, Tail Piece w/ Plastic Nut (S x SLIP)
1 1/2" x 1 1/2" (LP704P-015)
Adapter, Tail Piece w/ Plastic Nut (S x SLIP)
1 1/2" x 1 1/4" (LP704P-212)
Adjustable P-Trap w/ Plastic Nut (H x H)
1 1/4" (LP708P-012)
Cleanout Plug (MPT)
1 1/4" (LP106-012)
Cleanout Plug w/ Gasket (MPT)
1 1/4" - 12" (LP106R-xxx)
Closet Bend Street, Reducing w/ Test Cap (S x H)
3" x 4" (LP330X-342)
Closet Flange (FPT)
4" x 3" (LP830-422)
Closet Flange (MPT)
4" x 3" (LP831-422)
Closet Flange w/ Adjustable Metal Ring (H)!
4" (LP811-040)	4" x 3" (LP811-422)
Closet Flange w/ Adjustable Metal Ring (S)!
4" (LP812-040)	4" x 3" (LP812-422)
Closet Flange w/ Adjustable Plastic Ring (H)
4" (LP810-040)
Closet Flange w/ Adjustable Plastic Ring (S)
4" (LP812P-040)	4" x 3" (LP812P-422)
Closet Flange w/ Stop (H)
4" x 3" (LP800S-422)
Closet Flange w/ Test Plate (H)
4" (LP800T-040)	4" x 3" (LP800T-422)
Closet Flange, w/ Stop, Adj w/ Plastic Ring (H)
4" x 3" (LP810S-422)
Combination Wye and 1/8 Bend (One Piece) (All HUB)
1 1/4" - 12" (LP501-xxx)
Combination Wye and 1/8 Bend (Two Piece) (All HUB)
1 1/4" - 12" (LP503-xxx)
Combination Wye and 1/8 Bend Double Assembly(H)
1 1/4" - 12" (LP507-xxx)
Combination Wye and 1/8 Bend w/Left Side Inlet (H)
3" x 3" x 3"x 2" (LP515-338)
Combination Wye and 1/8 Bend w/Right Side Inlet(H)
3" x 3" x 3" x 2" (LP516-338)
Combo Wye and 1/8 Bend, Reducing (One Pc)(All HUB)
1 1/4" - 12" (LP502-xxx)
Combo Wye and 1/8 Bend, Reducing (Two Pc)(All HUB)
1 1/4" - 12" (LP504-xxx)
Coupling (H x H)
1 1/4" (LP100-012)
Dishwasher Wye (H x H x Hose Barb)
1 1/2" x 1 1/2" x 1/2" (LP601-209)
Double Sanitary Tee w/ R & L Side Inlets (All HUB)
3" x 3" x 3" x 3" x 2" x 2" (LP439-338)	4" x 4" x 4" x 4" x 2" x 2" (LP439-420)
Double Sanitary Tee w/ Side Inlet (All HUB)
3" x 3" x 3" x 3" x 1 1/2" (LP438-337)	3" x 3" x 3" x 3" x 2" (LP438-338)	4" x 4" x 4" x 4" x 2" (LP438-420)
Double Sanitary Tee, Reducing (ALL HUB)
3" x 3" x 2" x 1 1/2" (LP429-323)
Double Sanitary Tee, Street, Reducing (SxHxHxH)
3" x 3" x 2" x 2" (LP431-338)
Double Wye, w/ 2" Side Inlet (ALL HUB)
3" x 3" x 3" x 3" x 2" (LP611S-030)	4" x 4" x 4" x 4"x 2" (LP611S-040)
Drum Trap w/ Cleanout (H x H)
1 1/2" x 3" x 6" (LP720-015)
Female Adapter (FPT x H)
1 1/4" (LP101-012)
Fitting Cleanout Adapter (S x FPT)
1 1/4" (LP105-012)
Fitting Cleanout Adapter w/ C.O. Plug (S x FPT)
1 1/4" (LP105X-012)
Flush Bushing (S x H)
1 1/2" x 1 1/4" (LP107-212)	2" x 1 1/4" (LP107-250)
Flush C.O. Plug (MPT)
1 1/4" - 8" (LP110-xxx)
Flush C.O. Tee w/ C.O. Plug (H x H x FPT)
1 1/4" - 8" (LP445X-xxx)
Flush Closet Flange w/ Out Pipe Stop$
4" x 4"/4" x 3" (LP817-040)
Flush Closet Flange w/ Pipe Stop$
4" x 4"/4" x 3" (LP816-040)
Flush Closet Flange w/ Pipe Stop & Knockout$
4" x 4"/4" x 3" (LP818-040)
Horizontal Twin Tee (All HUB)
3" x 3" x 1 1/2" x 1 1/2" (LP447-337)
Hub Adapter, Cast Iron, Increaser (CI SxDWV H)
2" x 1 1/2" (LP123R-251)	3" x 1 1/2" (LP123R-337)	3" x 2" (LP123R-338)	4" x 3" (LP123R-422)
L.A. Pattern P-Trap (SLIP x H)%
1 1/2" (LP711X-015)	1 1/2" x 1 1/4" (LP711X-212)
Long Sweep 1/4 Bend w/ High Heel Inlet (All HUB)
3" x 3" x 1 1/2" (LP308-337)	3" x 3" x 2" (LP308-338)
Long Sweep 1/4 Bend w/ Side Inlet (All HUB)
3" x 3" x 2" (LP311-338)
Male Adapter (MPT x H)
1 1/4" (LP109-012)	1 1/4" x 1 1/2" (LP109-169)
Offset Closet Flange, w/Adjustable Metal Ring (H)!
4" x 3" (LP820-422)
P-Trap (H x SLIP)
1-1/4" - 2" (LP713-xxx)
P-Trap w/union Joint (H x FPT)
1 1/4" - 12" (LP709-xxx)
Pipe Increaser-Reducer (H × H)
1 1/2" × 1 1/4" (LP102-212)
Plug Slip (S)
1 1/4" - 12" (LP110S-xxx)
Reducer Bushing (Dishwasher Bushing) (S x FPT)
1 1/4" - 12" (LP108-xxx)
Reducing Female Adapter (H x FPT)
1 1/2" x 1 1/4" (LP101-212)
Reducing Sanitary Tee (ALL HUB)
1 1/2" x 1 1/2" x 1 1/4" (LP401-212)
Reducing Wye (ALL HUB)
6" - 12" (LP601-xxx)
Sanitary Tee (ALL HUB)
1 1/4" (LP400-012)
Sanitary Tee, Street (S x H x H)
1 1/4" - 12" (LP403-xxx)
Sanitary Tee, Street, Reducing (S x H x H)
1 1/4" - 12" (LP404-xxx)
Spigot Adapter, Cast Iron (CI H x DWV H)
1 1/4" - 12" (LP122-xxx)
Threaded Cap (FPT)
1 1/4" - 8" (LP135-xxx)
Trap Adapter - Female (H x SLIP)
1 1/4" - 2" (LP104-xxx)
Trap Adapter - Female w/ Brass Nut (H x SLIP)
1 1/2" x 1 1/4" (LP104B-212)
Trap Adapter - Female w/ Plastic Nut (H x SLIP)
1 1/4" (LP104P-012)	2" (LP104P-020)
Trap Adapter - Male (S x SLIP)
1 1/4" - 2" (LP103-xxx)
Trap Adapter Plug (H x NPSM Thread)
1 1/2" (LP128-015)
Trap Adapter Plug (S x NPSM Thread)
1 1/2" (LP129-015)
Trap Adapter-Female w/Chrome Nut & Washer(HxSLIP)
1 1/2" (LP104W-015)	1 1/2" x 1 1/4" (LP104W-212)	2" (LP104W-020)
Trap Adapter-Female w/Plastic Nut & Washer(HxSLIP)
1 1/4" (LP104X-012)	1 - 1/2" (LP104X-015)	1 - 1/2 x 1 - 1/4" (LP104X-212)	2" (LP104X-020)
Trap Adapter-Male w/Chrome Nut & Washer (S x SLIP)
1 1/4" - 2" (LP103W-xxx)
Trap Adapter-Male w/Plastic Nut & Washer(S x SLIP)
1 1/4" - 2" (LP103X-xxx)
Trap Adapter-Male w/Plastic Nut (S x SLIP)
1 1/4" - 2" (LP103P-xxx)
Trap Adapter-Male w/Plastic Nut (S x SLIP)@
1 1/4" - 2" (LP103R-xxx)
Trap Elbow (for use with Traps only) (H x S)
1 1/4" - 12" (LP335-xxx)
Tube End Cleanout (H x FPT)
1 1/4" -12" (LP905-xxx)
Tube End Cleanout (H x Gasket Plug)
1 1/4" - 12" (LP905X-xxx)
Vent Ell (H x H)
1 1/4" (LP331-012)
Vent Ell, Street (H x S)
1 1/4" (LP333-012)
Washer Box P-Trap (H x H)
2" (LP716-020)
Wye (ALL HUB)
1 1/4" (LP600-012)
Wye w/ Left Side Inlet (All HUB)
3" x 3" x 3" x 2" (LP625-338)	4" x 4" x 4" x 2" (LP625-420)
Wye w/ Right Side Inlet (All HUB)
3" x 3" x 3" x 2" (LP626-338)	4" x 4" x 4" x 2" (LP626-420)
Wye, Street (S x H x H)
1 1/4" - 12" (LP602-xxx)
Wye, Street, Reducing (S x H x H)
1 1/4" - 12" (LP603-xxx)
! Epoxy coated $ Fits inside 4" DWV pipe or over 3" pipe % With chrome nut, with chrome nut and washer @ 1 1/2” & 1 1/4" washers # This product may be marked with an alternate trade name: Liansu. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [3] Product is authorized to bear the cNSF and/or the cNSFus Mark except for 1/4, 3/8, 3-1/2 and 5 in. fittings. [4] Figure numbers may have the following prefix used to identify retail packaging requirements: R
Fittings# ¢ [2] [4]	PVC	Viterra	CSA B181.2
(LP104R-015) 1 1/2" x 1 1/2" x 1 1/2" x 1 1/4"
1-1/2" Trap Adapter-Female w/1-1/2 Plastic Nut & Washer	And 1-1/2×1-1/4 Washer(H×SLIP)
1/16 Bend (H x H)
1 1/2" - 12" (LP324-xxx)
1/16 Bend, Street (H x S)
1 1/2" - 12" (LP326-xxx)
1/4 Bend (H x H)
1 1/2" - 12" (LP300-xxx)
1/4 Bend w/ Low Heel Inlet (H x H x H)
1 1/2" - 12" (LP303-xxx)
1/4 Bend with Side Inlet (ALL HUB)
3" x 3" x 2" (LP300S-xxx)
1/4 Bend, Street (S x H)
1 1/2" - 12" (LP302-xxx)
1/4 Bend, Street w/ Low Heel Inlet (H x S x H)
1 1/2" - 12" (LP310-xxx)
1/6 Bend (H x H)
1 1/2" - 12" (LP319-xxx)
1/6 Bend, Street (H x S)
1 1/2" - 12" (LP320-xxx)
1/8 Bend (H x H)
1 1/2" - 12" (LP321-xxx)
1/8 Bend, Street (H x S)
1 1/2" - 12" (LP323-xxx)
2-Way Cleanout (ALL HUB)
1 1/2" - 12" (LP448-xxx)
Adapter Bushing (DWV SPIGOT x HUB)
1 1/2" - 12" (LP118-xxx)
Adapter Coupling (H x H)
1 1/2" - 12" (LP117-xxx)
Adjustable P-Trap w/ Plastic Nut (H x H)
1 1/2" - 2" (LP708P-xxx)
Cap (SOC)
1 1/2" - 12" (LP116-xxx)
Cleanout Plug (MPT)
1 1/2" - 12" (LP106-xxx)
Cleanout Tee w/ C.O. Plug (H x H)
1 1/2" - 12" (LP444X-xxx)
Closet Bend, Reducing (H x H)
3" x 4" (LP329-xxx)
Closet Bend, Street, Reducing (H x S)
3" x 4" (LP330-xxx)
Closet Flange (H)
1 1/2" - 12" (LP800-xxx)
Closet Flange, Reducing (SPIGOT)
1 1/2" - 12" (LP801-xxx)
Coupling (H x H)
1 1/2" - 12" (LP100-xxx)
Double 1/4 Bend (H x H x H)
1 1/2" - 4"(LP327-xxx)
Double Fixture Fitting (ALL HUB)
1 1/2" - 12" (LP500-xxx)
Double Sanitary Tee (ALL HUB)
1 1/2" - 12" (LP428-xxx)
Double Sanitary Tee, Reducing (ALL HUB)
(LP429-xxx)	2" x 2" x 1 1/2" x 1 1/2"	3" x 3" x 1 1/2" x 1 1/2"	3" x 3" x 2" x 2"
4" x 4" x 1 1/2" x 1 1/2"	4" x 4" x 2" x 2"	4" x 4" x 3" x 3"	6" x 6" x 2" x 2"
6" x 6" x 3" x 3"	6" x 6" x 4" x 4"	8" x 8" x 2" x 2"	8" x 8" x 3" x 3"
8" x 8" x 4" x 4"	8" x 8" x 6" x 6"	10" x 10" x 2" x 2"	10" x 10" x 3" x 3"
10" x 10" x 4" x 4"	10" x 10" x 6" x 6"	10" x 10" x 8" x 8"	12" x 12" x 2" x 2"
12" x 12" x 3" x 3"	12" x 12" x 4" x 4"	12" x 12" x 6" x 6"	12" x 12" x 8" x 8"
12" x 12" x 10" x 10"
Double Wye (ALL HUB)
1 1/2" - 12" (LP611-xxx)
Female Adapter (FPT x H)
1 1/2" - 12" (LP101-xxx)
Fitting Cleanout Adapter (S x FPT)
1 1/2" - 12" (LP105-xxx)
Fitting Cleanout Adapter w/ C.O. Plug (S x FPT)
1 1/2" - 12" (LP105X-xxx)
Flush Bushing (S x H)
1 1/2" - 12" (LP107-xxx)
Flush C.O. Tee (H x H x FPT)
1 1/2" - 12" (LP445-xxx)
Flush Closet Flange
1 1/2" - 12" (LP815-xxx)
Hub Adapter (H x S)
2" - 4" (LP123-xxx)
L.A. Pattern P-Trap, w/ Union Joint (SLIP x H)
(LP711P-xxx)	(LP711P-xxx) (SLIP x H w/ Plastic Nut & Washer)	1 1/4" x 1 1/2"	1 1/2"
Long Sweep 1/4 Bend (H x H)
1 1/2" - 12" (LP304-xxx)
Long Sweep 1/4 Bend w/Low Heel Inlet (All HUB)
1 1/2" - 12" (LP307-xxx)
Long Sweep 1/4 Bend, Street (H x S)
1 1/2" - 12" (LP309-xxx)
Male Adapter (MPT x H)
1 1/2" - 12" (LP109-xxx)
No-Hub Adapter (S x H)
1 1/2" - 12" (LP119-xxx)
P-Trap (H x H)
1 1/2" - 12" (LP706X-xxx)
P-Trap w/ Cleanout (H x H)
1 1/2" - 12" (LP707X-xxx)
P-Trap, Low Profile (H x H)
1 1/4" - 12" (LP710-xxx)
Pipe Increaser - Reducer (H x H)
(LP102-xxx)	2" x 1 1/2"	3" x 1 1/2"	3" x 2"
4" x 1 1/2"	4" x 2"	4" x 3"	6" x 2"
6" x 3"	6" x 4"	8" x 4"	8" x 6"
10" x 4"	10" x 6"	10" x 8"	12" x 2"
12" x 3"	12" x 4"	12" x 6"	12" x 8"
12" x 10"
Reducing Double Wye (ALL HUB)
(LP612-xxx)	2" x 2" x 1 1/2" x 1 1/2"	3" x 3" x 1 1/2" x 1 1/2"	3" x 3" x 2" x 2"
4" x 4" x 2" x 2"	4" x 4" x 3" x 3"	6" x 6" x 2" x 2"	6" x 6" x 3" x 3"
6" x 6" x 4" x 4"	8" x 8" x 2" x 2"	8" x 8" x 3" x 3"	8" x 8" x 4" x 4"
8" x 8" x 6" x 6"	10" x 10" x 2" x 2"	10" x 10" x 3" x 3"	10" x 10" x 4" x 4"
10" x 10" x 6" x 6"	10" x 10" x 8" x 8"	12" x 12" x 2" x 2"	12" x 12" x 3" x 3"
12" x 12" x 4" x 4"	12" x 12" x 6" x 6"	12" x 12" x 8" x 8"	12" x 12" x 10" x 10"
Reducing Sanitary Tee (ALL HUB)
(LP401-xxx)	2" x 1 1/2" x 1 1/2"	2" x 2" x 1 1/2"	2" x 1 1/2" x 2"
3" x 3" x 1 1/2"	3" x 3" x 2"	4" x 4" x 1 1/2"	4" x 4" x 2"
4" x 4" x 3"	6" x 6" x 2"	6" x 6" x 3"	6" x 6" x 4"
8" x 8" x 2"	8" x 8" x 3"	8" x 8" x 4"	8" x 8" x 6"
10" x 10" x 2"	10" x 10" x 3"	10" x 10" x 4"	10" x 10" x 6"
10" x 10" x 8"	12" x 12" x 2"	12" x 12" x 3"	12" x 12" x 4"
12" x 12" x 6"	12" x 12" x 8"	12" x 12" x 10"
Reducing Wye (ALL HUB)
(LP601-xxx)	2" x 1 1/2" x 1 1/2"	2" x 2" x 1 1/2"	2 x 1 1/2" x 2"
3" x 3" x 1 1/2"	3" x 3" x 2"	4" x 4" x 1 1/2"	4" x 4" x 2"
4" x 4" x 3"	6" x 6" x 2"	6" x 6" x 3"
Repair Coupling (H x H)
1 1/2" - 12" (LP130-xxx)
Return Bend (H x H)
1 1/2" - 12" (LP700-xxx)
Sanitary Tee (ALL HUB)
1 1/2" - 12" (LP400-xxx)
Sanitary Tee w/ Left Side Inlet (ALL HUB)
1 1/2" - 12" (LP416-xxx)
Sanitary Tee w/ R & L Side Inlets (ALL HUB)
1 1/2" - 12" (LP418-xxx)
Sanitary Tee w/ Right Side Inlet (ALL HUB)
1 1/2" - 12" (LP417-xxx)
Trap Adapter - Female w/Plastic Nut (H x SLIP)
(LP104P-xxx)	1 1/2" x 1 1/4"	1 1/2"
Vent Ell (H x H)
1 1/2" - 12" (LP331-xxx)
Vent Ell, Street (H x S)
1 1/2" - 12" (LP333-xxx)
Vent Tee (ALL HUB)
1 1/2" - 12" (LP441-xxx)
Wye (ALL HUB)
1 1/2" - 12" (LP600-xxx)
# This product may be marked with an alternate trade name: Liansu. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [2] XXX - size 012 - 1 1/4" 015 - 1 1/2" 020 - 2" 030 - 3" 040 - 4" 060 - 6" 080 - 8" 100 - 10" 120 - 12" 169 - 1 1/4" x 1 1/2" 212 - 1 1/2" x 1 1/4" 213 - 1 1/2" x 2" 241 - 2" × 1 1/2" × 1 1/2" or 2" × 1 1/2" × 1 1/2" × 1 1/2" 251 - 2" × 1 1/2" or 2" × 2" × 1 1/2" × 1 1/2" 253 - 2" x 3" 337 - 3" × 1 1/2" or 3" × 3" × 1 1/2" or 3" × 3" × 3" × 1 1/2" 338 - 3" × 2" or3" × 3" × 2" or 3" × 3" × 3" × 2" 342 - 3" x 4" 415 - 4" × 4" × 1/2" 420 - 4" × 2" or 4" × 4" × 2" or 4" × 4" × 4" × 2" 422 - 4" × 3" or 4" × 4" × 3" or 4" × 4" × 4" × 3" 532 - 6" × 4" or 6" × 6" × 4" or 6" × 6" × 6" × 4" 582 - 8" × 4" or 8" × 8" × 4" or 8" × 8" × 8" × 4" 585 - 8" × 6" or 8" × 8" × 6" or 8" × 8" × 8" × 6" 626 - 10" × 6" or 10" × 10" × 6" or 10" × 10" × 10" × 6" 628 - 10" × 8" or 10" × 10" × 8" or 10" × 10" × 10" × 8" 670 - 12" × 10" or 12" × 12" × 10" or 12" × 12" × 12" × 10" [4] Figure numbers may have the following prefix used to identify retail packaging requirements: R
Fittings# ¢ [2] [4]	PVC	Viterra	CSA B181.2
Closet Flange w/ Adjustable Plastic Ring (H)
LP810P-040 (4")
Closet Flange, w/ Adjustable w/ PVC Plastic Ring
LP820P-422 (4" x 3")
Closet Flange, w/ Stop, Adj w/ Plastic Ring (H)
LP810S-342 (3" x 4")	LP810S-040 (4")
Flush Adapter (S x FPT)
LP111-212 (1 1/2" x 1 1/4")	LP111-251 (2" x 1 1/2")	LP111-337 (3" x 1 1/2")	LP111-338 (3" x 2")
Flush Closet Flange w/ Pipe Stop & Knockout$
LP816KO-040 (4" x 4"/4" x 3")
Hub Adapter (H x S)
LP123-213 (1 1/2" x 2")	LP123-253 (2" x 3")	LP123-342 (3" x 4")
Offset Closet Flange,w/ Adjustable Metal Ring (H)!
LP820-040 (4")
Reducing Sanitary Tee (All Hub)
LP401-415 (4" x 4" x 3")
Threaded Cap (FPT)
LP135-012 (1 1/4")
Trap Adapter Cap (FPT)
LP112-012 (1 1/4")	LP112-015 (1 1/2")	LP112-020 (2")
Trap Adapter Cap B (FPT)
LP113-012 (1 1/4")	LP113-015 (1 1/2")	LP113-020 (2")
Trap Adapter Cap w/ Gasket
LP114-012 (1 1/4")	LP114-015 (1 1/2")	LP114-020 (2")
Trap Adapter Gasket
LP113R-012 (1 1/4")	LP113R-015 (1 1/2")	LP113R-020 (2")
Trap Adapter-Male (S x SLIP)
LP103-030 (3")
Trap Adapter-Male w/Chrome Nut & Washer (S x SLIP)
LP103W-212 (1 1/2" x 1 1/4")
$ Fits inside 4" DWV pipe or over 3" pipe ! Epoxy coated # This product may be marked with an alternate trade name: Liansu. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [2] XXX - size 012 - 1 1/4" 015 - 1 1/2" 020 - 2" 030 - 3" 040 - 4" 060 - 6" 080 - 8" 100 - 10" 120 - 12" 169 - 1 1/4" x 1 1/2" 212 - 1 1/2" x 1 1/4" 213 - 1 1/2" x 2" 241 - 2" × 1 1/2" × 1 1/2" or 2" × 1 1/2" × 1 1/2" × 1 1/2" 251 - 2" × 1 1/2" or 2" × 2" × 1 1/2" × 1 1/2" 253 - 2" x 3" 337 - 3" × 1 1/2" or 3" × 3" × 1 1/2" or 3" × 3" × 3" × 1 1/2" 338 - 3" × 2" or3" × 3" × 2" or 3" × 3" × 3" × 2" 342 - 3" x 4" 415 - 4" × 4" × 1/2" 420 - 4" × 2" or 4" × 4" × 2" or 4" × 4" × 4" × 2" 422 - 4" × 3" or 4" × 4" × 3" or 4" × 4" × 4" × 3" 532 - 6" × 4" or 6" × 6" × 4" or 6" × 6" × 6" × 4" 582 - 8" × 4" or 8" × 8" × 4" or 8" × 8" × 8" × 4" 585 - 8" × 6" or 8" × 8" × 6" or 8" × 8" × 8" × 6" 626 - 10" × 6" or 10" × 10" × 6" or 10" × 10" × 10" × 6" 628 - 10" × 8" or 10" × 10" × 8" or 10" × 10" × 10" × 8" 670 - 12" × 10" or 12" × 12" × 10" or 12" × 12" × 12" × 10" [4] Figure numbers may have the following prefix used to identify retail packaging requirements: R
Fittings§ [1]	ABS	Viterra	*SE 7992*
90° Elbow With Side Inlet (HUB x HUB x HUB)
LN300S-337 (3" x 3" x 1 1/2")
Dishwasher Adapter (Sp×Barb)
LN610-015 (1-1/2")
Dishwasher Y (Hub)
LN601-209 (1-1/2" × 1-1/2" × 1/2")	LN601-210 (1-1/2" × 1-1/2" × 3/4")
Expansion Joint (HUB x HUB)
LNH119-015 (1 1/2")	LNH119-020 (2")	LNH119-030 (3")	LNH119-040 (4")
Expansion Joint (HUB x Spg)
LNH119S-030 (3")
Hub Adapter Cast Iron (HUB x SJ)
LN123-020 (2")	LN123-030 (3")	LN123-040 (4")
Hub Adapter Cast Iron Increaser (HUB x SJ)
LN123R-213 (1 1/2" x 2")	LN123R-342 (3" x 4")
P-Trap (Hub x Hub x Cleanout w/ Plug)
LN707X-015 (1 1/2")	LN707X-020 (2")
P-Trap w/ Union & C/O (Hub x Hub x C/O)
LN712-015 (1 1/2")
Pivoting P-Trap w/ Plug (HUB×HUB×CLEANOUT W/PLUG)
LN707S-015 1 1/2"
Plug With Gasket (MIPT)
LN106R-025 (2 1/2")	LN106R-035 (2 1/2")	LN106R-060 (6")
Return Bend (Hub x Hub x Cleanout w/ Plug)
LN701-xxx (1 1/2" - 12")
Tray Plug Adapter - Spigot
LN130X-015 (1 1/2")
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Figure numbers may have one of the following optional prefixes used to identify retail packaging requirements: URP, U, UTP, USP, UPP, UP, UMP, UHP, UBP, PP, MPP, RP, MRP, RLN, LN, RS, MRR, RL, CPRLN, or RLR.
Fittings§ [1]	ABS	Viterra	*SE 7992*
90° Elbow w/ Side Inlet (HUB x HUB x HUB)
LN300S-338 (3" x 3" x 2")
ABS-Copper Adapter (HUB x SJ)
LN120-015 (1 1/2")	LN120-212 (1 1/2" x 1 1/4")
Cap (FIPT)
LN116F-015 (1 1/2")
Cleanout Wye (HUB x HUB x FIPT)
LN604-015 (1 1/2")
Drum Trap w/ Cleanout
LN702X-363 (3" x 6" x 1 1/2")
LA Pattern P-Trap w/Union & Plastic Nut (HUB x SJ)
LN711M-015 (1 1/2")	LN711M-212 (1 1/2" x 1 1/4")
P-Trap (HUB x HUB x Cleanout)
LN707X-015 (1-1/2")	LN707X-020 (2")
P-Trap w/ Union Joint (Hub x Hub)
LN708P-020 (2")
Pipe Increaser-Reducer (HUB x HUB)
LN102-419 (4" x 1 1/2")
Plug with Gasket (MIPT)
LN106R-012 (1 1/4")	LN106R-015 (1 1/2")	LN106R-020 (2")	LN106R-030 (3")
LN106R-040 (4")
Repair Coupling (HUB x HUB)
LN130-015 (1 1/2")	LN130-020 (2")	LN130-030 (3")	LN130-040 (4")
Sewer Pipe Adapter Coupling (Sewer HUBxSCH 40 HUB)
LN117S-040 (4" x 4")	LN117S-422 (4" x 3")
Slip Joint Nut (FIPT)
LN115-015 (1 1/2")
Snap-In Cleanout w/ Plug
LN106W-030 (3")	LN106W-040 (4")
Test Tee (HUB x HUB x Cleanout w/ Plug)
LN444X-427 (4" x 3" x 4")
Test Tee (HUB x HUB x FIPT)
LN445-427 (4" x 3" x 4")
Tray Plug Adapter
LN900-015 (1 1/2")
Union (HUB x HUB)
LN126-015 (1 1/2")	LN126-020 (2")	LN126-030 (3")	LN126-040 (4")
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Figure numbers may have one of the following optional prefixes used to identify retail packaging requirements: URP, U, UTP, USP, UPP, UP, UMP, UHP, UBP, PP, MPP, RP, MRP, RLN, LN, RS, MRR, RL, CPRLN, or RLR.
Fittings# § [2] [4]	PVC	Viterra	*SE 7992*
1/4 Bend with Side Inlet (ALL HUB)
3" x 3" x 2" (LP300S-xxx)
2-Way Cleanout (ALL HUB)
1 1/4" (LP448-xxx)	1 1/2" (LP448-xxx)	2" (LP448-xxx)	8" (LP448-xxx)
10" (LP448-xxx)	12" (LP448-xxx)
Double Sanitary Tee, Reducing (ALL HUB)
LP429-xxx	6" x 6" x 2" x 2"	8" x 8" x 2" x 2"	8" x 8" x 3" x 3"
10" x 10" x 2" x 2"	10" x 10" x 3" x 3"	10" x 10" x 4" x 4"	10" x 10" x 6" x 6"
10" x 10" x 8" x 8"	12" x 12" x 2" x 2"	12" x 12" x 3" x 3"	12" x 12" x 4" x 4"
12" x 12" x 6" x 6"	12" x 12" x 8" x 8"	12" x 12" x 10" x 10"
Flush Adapter (S x FPT)
LP111-212 (1 1/2" x 1 1/4" )	LP111-251 (2" x 1 1/2")	LP111-337 (3" x 1 1/2")	LP111-338 (3" x 2")
Flush Closet Flange w/ Pipe Stop & Knockout$
LP816KO-040 (4" x 4"/4" x 3")
L.A. Pattern P-Trap, w/ Union Joint (SLIP x H)
(LP711P-xxx)	1 1/4" SLIP Washers, w/ Plastic Nut (SLIP x H)	1 1/4" x 1 1/2"	1 1/2"
Pipe Increaser - Reducer (H x H)
(LP102-xxx)	4" x 1 1/2"	6" x 2"	12" x 2"
12" x 3"	12" x 4"
Reducing Double Wye (ALL HUB)
(LP612-xxx)	6" x 6" x 2" x 2"	8" x 8" x 2" x 2"	8" x 8" x 3" x 3"
10" x 10" x 2" x 2"	10" x 10" x 3" x 3"	12" x 12" x 2" x 2"	12" x 12" x 3" x 3"
Reducing Sanitary Tee (ALL HUB)
(LP401-xxx)	6" x 6" x 2"	8" x 8" x 2"	8" x 8" x 3"
10" x 10" x 2"	10" x 10" x 3"	10" x 10" x 4"	10" x 10" x 6"
10" x 10" x 8"	12" x 12" x 2"	12" x 12" x 3"	12" x 12" x 4"
12" x 12" x 6"	12" x 12" x 8"	12" x 12" x 10"
Vent Ell, Street (H x S)
6" - 12" (LP333-xxx)
$ Fits inside 4" DWV pipe or over 3" pipe # This product may be marked with an alternate trade name: Liansu. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [2] XXX - size 012 - 1 1/4" 015 - 1 1/2" 020 - 2" 030 - 3" 040 - 4" 060 - 6" 080 - 8" 100 - 10" 120 - 12" 169 - 1 1/4" x 1 1/2" 212 - 1 1/2" x 1 1/4" 213 - 1 1/2" x 2" 241 - 2" × 1 1/2" × 1 1/2" or 2" × 1 1/2" × 1 1/2" × 1 1/2" 251 - 2" × 1 1/2" or 2" × 2" × 1 1/2" × 1 1/2" 253 - 2" x 3" 337 - 3" × 1 1/2" or 3" × 3" × 1 1/2" or 3" × 3" × 3" × 1 1/2" 338 - 3" × 2" or3" × 3" × 2" or 3" × 3" × 3" × 2" 342 - 3" x 4" 415 - 4" × 4" × 1/2" 420 - 4" × 2" or 4" × 4" × 2" or 4" × 4" × 4" × 2" 422 - 4" × 3" or 4" × 4" × 3" or 4" × 4" × 4" × 3" 532 - 6" × 4" or 6" × 6" × 4" or 6" × 6" × 6" × 4" 582 - 8" × 4" or 8" × 8" × 4" or 8" × 8" × 8" × 4" 585 - 8" × 6" or 8" × 8" × 6" or 8" × 8" × 8" × 6" 626 - 10" × 6" or 10" × 10" × 6" or 10" × 10" × 10" × 6" 628 - 10" × 8" or 10" × 10" × 8" or 10" × 10" × 10" × 8" 670 - 12" × 10" or 12" × 12" × 10" or 12" × 12" × 12" × 10" [4] Figure numbers may have the following prefix used to identify retail packaging requirements: R
Fittings# § [3] [4]	PVC	Viterra	*SE 7992*
1/4 Bend w/ High Heel Inlet (All HUB)
3" x 3" x 2" (LP303H-338)
1/4 Bend w/ High Heel Inlet (All HUB)
3" x 3" x 1 1/2" (LP303H-337)
1/4 Bend with Side Inlet (ALL HUB)
3" x 3" x 1 1/2" (LP300S-337)
1/4 Bend, Reducing (H x H)
1 1/4" - 12" (LP300R-xxx)
Adapter, Schedule 40 to Schedule 30 (H x H)
3" (LP117S-030)
Adapter, Tail Piece w/ Plastic Nut (S x SLIP)
1 1/2" x 1 1/4" (LP704P-212)
Adapter, Tail Piece w/ Plastic Nut (S x SLIP)
1 1/2" x 1 1/2" (LP704P-015)
Cleanout Plug w/ Gasket (MPT)
1 1/4" - 12" (LP106R-xxx)
Combination Wye and 1/8 Bend w/Left Side Inlet (H)
3" x 3" x 3"x 2" (LP515-338)
Combination Wye and 1/8 Bend w/Right Side Inlet(H)
3" x 3" x 3" x 2" (LP516-338)
Double Wye, w/ 2" Side Inlet (ALL HUB)
3" x 3" x 3" x 3" x 2" (LP611S-030)	4" x 4" x 4" x 4"x 2" (LP611S-040)
Drum Trap w/ Cleanout (H x H)
1 1/2" x 3" x 6" (LP720-015)
Flush Closet Flange w/ Out Pipe Stop$
4" x 4"/4" x 3" (LP817-040)
Flush Closet Flange w/ Pipe Stop$
4" x 4"/4" x 3" (LP816-040)
Flush Closet Flange w/ Pipe Stop & Knockout$
4" x 4"/4" x 3" (LP818-040)
Horizontal Twin Tee (All HUB)
3" x 3" x 1 1/2" x 1 1/2" (LP447-337)
Hub Adapter, Cast Iron, Increaser (CI SxDWV H)
2" x 1 1/2" (LP123R-251)	3" x 1 1/2" (LP123R-337)	3" x 2" (LP123R-338)
L.A. Pattern P-Trap (SLIP x H)%
1 1/2" (LP711X-015)	1 1/2" x 1 1/4" (LP711X-212)
Long Sweep 1/4 Bend w/ High Heel Inlet (All HUB)
3" x 3" x 1 1/2" (LP308-337)
Long Sweep 1/4 Bend w/ Side Inlet (All HUB)
3" x 3" x 2" (LP311-338)
Plug Slip (S)
1 1/4" - 12" (LP110S-xxx)
Wye w/ Left Side Inlet (All HUB)
3" x 3" x 3" x 2" (LP625-338)	4" x 4" x 4" x 2" (LP625-420)
Wye w/ Right Side Inlet (All HUB)
3" x 3" x 3" x 2" (LP626-338)	4" x 4" x 4" x 2" (LP626-420)
$ Fits inside 4" DWV pipe or over 3" pipe % With chrome nut, with chrome nut and washer # This product may be marked with an alternate trade name: Liansu. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [3] Product is authorized to bear the cNSF and/or the cNSFus Mark except for 1/4, 3/8, 3-1/2 and 5 in. fittings. [4] Figure numbers may have the following prefix used to identify retail packaging requirements: R
Fittings§ [1]	ABS	Viterra	ASTM D2661
22 1/2° Street Elbow (HUB x Spg)
A326-015 (1 1/2")	A326-020 (2")	A326-030 (3")	A326-040 (4")
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Figure numbers may have one of the following optional prefixes used to identify retail packaging requirements: URP, U, UTP, USP, UPP, UP, UMP, UHP, UBP, PP, MPP, RP, MRP, RLN, LN, RS, MRR, RL, CPRLN, or RLR.
Fittings[1]	PVC	Viterra	ASTM D3034
1/4 Bend (H × H)
SWR300-040 (4")	SWR300-030 (3")	SWR300-080 (8")	SWR300-060 (6")
[1] Figure numbers may have one of the following optional prefixes used to identify retail packaging requirements: URP, U, UTP, USP, UPP, UP, UMP, UHP, UBP, PP, MPP, RP, MRP, RLN, LN, RS, MRR, RL, CPRLN, or RLR.
Fittings¢ [1]	ABS	Viterra	CSA B181.1
22 1/2° Street Elbow (HUB x Spg)
A326-015 (1 1/2")	A326-020 (2")	A326-030 (3")	A326-040 (4")
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Figure numbers may have one of the following optional prefixes used to identify retail packaging requirements: URP, U, UTP, USP, UPP, UP, UMP, UHP, UBP, PP, MPP, RP, MRP, RLN, LN, RS, MRR, RL, CPRLN, or RLR.
Fittings§ [3] [4]	PVC	Viterra	ASTM D2665
Trap Adapter-Female w/Plastic Nut & Washer(HxSLIP)
1-1/2" (PD104W-015)	1-1/2 x 1-1/4" (PD104W-212)	1 1/4" (PD104W-012)	2" (PD104W-020)
Trap Adapter-Male w/Plastic Nut & Washer(S x SLIP)
1 1/4" - 2" (PD103W-xxx)
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [3] Product is authorized to bear the cNSF and/or the cNSFus Mark except for 1/4, 3/8, 3-1/2 and 5 in. fittings. [4] Figure numbers may have the following prefix used to identify retail packaging requirements: R
Fittings¢ [3] [4]	MLTPL	Viterra	CSA B181.2
Trap Adapter-Female w/Plastic Nut & Washer(HxSLIP)
1 1/4" (PD104W-012)	1-1/2 x 1-1/4" (PD104W-212)	2" (PD104W-020)	1-1/2" (PD104W-015)
Trap Adapter-Male w/Plastic Nut & Washer(S x SLIP)
1 1/4" - 2" (PD103W-xxx)
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [3] Product is authorized to bear the cNSF and/or the cNSFus Mark except for 1/4, 3/8, 3-1/2 and 5 in. fittings. [4] Figure numbers may have the following prefix used to identify retail packaging requirements: R
Fittings¢ [2] [4]	PVC	Viterra	CSA B181.2
L.A. Pattern P-Trap, w/ Union Joint (SLIP x H)
(PD711W-xxx) (SLIP x H w/ Plastic Nut & Washer)	(PD711W-xxx)	1 1/2"	1 1/4" x 1 1/2"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [2] XXX - size 012 - 1 1/4" 015 - 1 1/2" 020 - 2" 030 - 3" 040 - 4" 060 - 6" 080 - 8" 100 - 10" 120 - 12" 169 - 1 1/4" x 1 1/2" 212 - 1 1/2" x 1 1/4" 213 - 1 1/2" x 2" 241 - 2" × 1 1/2" × 1 1/2" or 2" × 1 1/2" × 1 1/2" × 1 1/2" 251 - 2" × 1 1/2" or 2" × 2" × 1 1/2" × 1 1/2" 253 - 2" x 3" 337 - 3" × 1 1/2" or 3" × 3" × 1 1/2" or 3" × 3" × 3" × 1 1/2" 338 - 3" × 2" or3" × 3" × 2" or 3" × 3" × 3" × 2" 342 - 3" x 4" 415 - 4" × 4" × 1/2" 420 - 4" × 2" or 4" × 4" × 2" or 4" × 4" × 4" × 2" 422 - 4" × 3" or 4" × 4" × 3" or 4" × 4" × 4" × 3" 532 - 6" × 4" or 6" × 6" × 4" or 6" × 6" × 6" × 4" 582 - 8" × 4" or 8" × 8" × 4" or 8" × 8" × 8" × 4" 585 - 8" × 6" or 8" × 8" × 6" or 8" × 8" × 8" × 6" 626 - 10" × 6" or 10" × 10" × 6" or 10" × 10" × 10" × 6" 628 - 10" × 8" or 10" × 10" × 8" or 10" × 10" × 10" × 8" 670 - 12" × 10" or 12" × 12" × 10" or 12" × 12" × 12" × 10" [4] Figure numbers may have the following prefix used to identify retail packaging requirements: R
Fittings§ [2] [4]	PVC	Viterra	*SE 7992*
L.A. Pattern P-Trap, w/ Union Joint (SLIP x H)
1 1/4" x 1 1/2"	(PD711W-xxx) (SLIP x H w/ Plastic Nut & Washer)	1 1/2"	(PD711W-xxx)
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [2] XXX - size 012 - 1 1/4" 015 - 1 1/2" 020 - 2" 030 - 3" 040 - 4" 060 - 6" 080 - 8" 100 - 10" 120 - 12" 169 - 1 1/4" x 1 1/2" 212 - 1 1/2" x 1 1/4" 213 - 1 1/2" x 2" 241 - 2" × 1 1/2" × 1 1/2" or 2" × 1 1/2" × 1 1/2" × 1 1/2" 251 - 2" × 1 1/2" or 2" × 2" × 1 1/2" × 1 1/2" 253 - 2" x 3" 337 - 3" × 1 1/2" or 3" × 3" × 1 1/2" or 3" × 3" × 3" × 1 1/2" 338 - 3" × 2" or3" × 3" × 2" or 3" × 3" × 3" × 2" 342 - 3" x 4" 415 - 4" × 4" × 1/2" 420 - 4" × 2" or 4" × 4" × 2" or 4" × 4" × 4" × 2" 422 - 4" × 3" or 4" × 4" × 3" or 4" × 4" × 4" × 3" 532 - 6" × 4" or 6" × 6" × 4" or 6" × 6" × 6" × 4" 582 - 8" × 4" or 8" × 8" × 4" or 8" × 8" × 8" × 4" 585 - 8" × 6" or 8" × 8" × 6" or 8" × 8" × 8" × 6" 626 - 10" × 6" or 10" × 10" × 6" or 10" × 10" × 10" × 6" 628 - 10" × 8" or 10" × 10" × 8" or 10" × 10" × 10" × 8" 670 - 12" × 10" or 12" × 12" × 10" or 12" × 12" × 12" × 10" [4] Figure numbers may have the following prefix used to identify retail packaging requirements: R

Sewer Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Solvent Weld Sewer Pipe	PVC	Viterra	ASTM D3034
3" - 15" DR 35[1]
[1] Certification includes the following: 3"-15" Sewer pipe VSW002-030 3" VSW002-040 4" VSW002-060 6" VSW002-080 8" VSW002-100 10" VSW002-120 12" VSW002-150 15"

Potable Water - Materials

Material Type

End Use

Trade Name

Product Standard

PVC# + [G]

Viterra F

ASTM D1784 12454

# This product may be marked with an alternate trade name: Liansu F
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

NOTE: All Listed products from this facility are NSF Certified, whether or not they bear the
      NSF Mark.

Number of matching Manufacturers is 1
Number of matching Products is 3814
Processing time was 1 seconds

NSF Product and Service Listings

Did you know?

Connect with NSF