NSF Product and Service Listings

These NSF Official Listings are current as of Tuesday, April 23, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?ProductStandard=ASTM+F877&

Did you know?

The new NSF Product Listings website is available for NSF/ANSI 14-Certified products with a new look and feel. Click on "Try it Now" to check it out!

NSF/ANSI 14
Plastics Piping System Components and Related Materials


Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document



 
Anderson Fittings 
255 East Industry Avenue
Frankfort, IL 60423 
United States 
800-323-5284 
815-469-8201
Visit this company's website

Facility : # 3 USA

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings¢ § +++ [G]
 
Brass
 
AF PEX LEADFREE
 
ASTM F877

MPT x PEX Barb Elbow
3/8" - 2"  

Male Sweat x PEX Barb
3/8" - 2"  

PEX Barb Adapter
3/8" - 2"  

PEX Barb Coupling
3/8" - 2"  

PEX Barb Elbow
3/8" - 2"  

PEX Barb Plug
3/8" - 2"  

PEX Barb Reducing Coupling
3/8" - 2"  

PEX Barb Reducing Elbow
3/8" - 2"  

PEX Barb Reducing Tee
3/8" - 2"  

PEX Barb Swivel Adapters
3/8" - 3/4"  

PEX Barb Tee
3/8" - 2"  

PEX Barb x Compression Adapter
3/8" - 3/4"  

PEX Barb x Cu Sweat Elbow
3/8" - 2"  

PEX Barb x FIP Swivel Adapter
3/8" - 2"  

PEX Barb x FPT Adapter
3/8" - 2"  

PEX Barb x FPT Drop Ear Elbow
1/2" - 3/4"  

PEX Barb x Female Sweat Adapter
3/8" - 2"  

PEX Barb x MPT Adapter
3/8" - 2"  

PEX Barb x PB Tube Coupling
3/8" - 1"  

PEX Barb x PE Tube Coupling
3/8" - 1"  

PEX Barb x Swivel Adapter
3/8" - 2"  

Plug Seal Manifold
3/8" - 2"  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : Frankfort, IL

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings¢ § +++ [G]
 
Brass
 
AF PEX LEADFREE
 
ASTM F877

MPT x PEX Barb Elbow
3/8" - 2"  

Male Sweat x PEX Barb
3/8" - 2"  

PEX Barb Adapter
3/8" - 2"  

PEX Barb Coupling
3/8" - 2"  

PEX Barb Elbow
3/8" - 2"  

PEX Barb Plug
3/8" - 2"  

PEX Barb Reducing Coupling
3/8" - 2"  

PEX Barb Reducing Elbow
3/8" - 2"  

PEX Barb Reducing Tee
3/8" - 2"  

PEX Barb Swivel Adapters
3/8" - 3/4"  

PEX Barb Tee
3/8" - 2"  

PEX Barb x Compression Adapter
3/8" - 3/4"  

PEX Barb x Cu Sweat Elbow
3/8" - 2"  

PEX Barb x FIP Swivel Adapter
3/8" - 2"  

PEX Barb x FPT Adapter
3/8" - 2"  

PEX Barb x FPT Drop Ear Elbow
1/2" - 3/4"  

PEX Barb x Female Sweat Adapter
3/8" - 2"  

PEX Barb x MPT Adapter
3/8" - 2"  

PEX Barb x PB Tube Coupling
3/8" - 1  

PEX Barb x PE Tube Coupling
3/8" - 1  

PEX Barb x Swivel Adapter
3/8" - 2"  

Plug Seal Manifold
3/8" - 2"  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings¢ § +++ [G]
 
MLTPL
 
Anderson F1807 Copper Stub Outs
 
ASTM F877
1/2" - 1"  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings¢ § +++ [G]
 
MLTPL
 
Anderson F1807 Formed Copper Stubout
 
ASTM F877
3/8" - 1"

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Bow Plumbing Group, Inc. 
5700 Cote de Liesse
Montreal, QC H4T 1B1 
Canada 
450-372-5481
Visit this company's website

Facility : Granby, Quebec, Canada

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings¢ § ++ [G]
 
PPSU
 
Bow
 
ASTM F877

2 Wing Elbow Barb x NPSM
1/2", 3/4"  

3 Wing Elbow Barb x NPSM
1/2", 3/4"  

90° Barb Elbow
1/2", 3/4", 3/4" x 1/2"  

90° Barb Elbow x MPT Elbow
1/2", 3/4"  

Barb Tee
1/2" x 1/2" x 1/2"   1/2" x 1/2" x 3/4"   3/4" x 1/2" x 1/2"   3/4" x 1/2" x 3/4"  
3/4" x 3/4" x 1/2"   3/4" x 3/4" x 3/4"  

Couplings
1/2", 3/4", 3/4" x 1/2"  

Male Adapter PEX Barb x MPT
1/2", 3/4", 1/2" x 3/4", 3/4" x 1/2"  

Test Plugs
1/2", 3/4"  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Cello Products Inc. 
210 Avenue Road
Cambridge, ON N1R 8H5 
Canada 
800-265-7882

Facility : Ningbo, China

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings§ +++ [G]
 
PPSU
 
CELLO
 
ASTM F877

MPT Plastic Adapter
PPX4-06   PPX4-08-06  

MPT Plastic Elbow
PPX74-06-08   PPX74-08-12  

Plastic Adapter
PPX3-06-08   PPX3-08   PPX3-08-12   PPX3-12  
PPX3-16   PPX4-06-08   PPX4-08   PPX4-08-12  
PPX4-12   PPX4-12-08   PPX4-16   PPX4-16-12  

Plastic Elbow
PPX74-08   PPX74-08-06   PPX74-12   PPX74-12-08  
PPX74-16-12  

Plastic PEX Coupling
PPX0-06   PPX0-08   PPX0-08-06   PPX0-12  
PPX0-12-08   PPX0-16   PPX0-16-08   PPX0-16-12  

Plastic PEX Elbow
PPX7-06   PPX7-08   PPX7-08-06   PPX7-12  
PPX7-12-08   PPX7-16  

Plastic PEX Plug
PPXTEST-06   PPXTEST-08   PPXTEST-12   PPXTEST-16  

Plastic PEX Tee
PPXT-06   PPXT-06-06-08   PPXT-08   PPXT-08-06-06  
PPXT-08-08-06   PPXT-08-08-12   PPXT-12   PPXT-12-08-08  
PPXT-12-08-12   PPXT-12-12-08   PPXT-16   PPXT-16-12-12  
PPXT-16-12-16   PPXT-16-16-08   PPXT-16-16-12  

Plastic Swivel Adapter
PPXS0-08   PPXS0-12  

Plastic Swivel Elbow
PPXS7-08  

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Cello Products Inc. 
210 Avenue Rd
Cambridge, ON N1R 8H5 
Canada 
1-800-265-7882 
519-621-9150

Facility : Zhejiang, China

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pinch Clamp[2] [3]
 
SS
 
SS Clamp
 
ASTM F877
PX0CR-S-06
PX0CR-S-08
PX0CR-S-10
PX0CR-S-12
PX0CR-S-16

[2] Product is non-water contact.
[3] Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098
    prior to presetting. As-sold dimensions are per manufacturer's specifications.


Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

Pinch Clamp[2] [3]
 
SS
 
SS Clamp
 
ASTM F877
PX0CR-S-06
PX0CR-S-08
PX0CR-S-10
PX0CR-S-12
PX0CR-S-16

[2] Product is non-water contact.
[3] Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098
    prior to presetting. As-sold dimensions are per manufacturer's specifications.



 
Cixi Welday Plastic Product Co., Ltd. 
8# Hua Yuan Road, Fanshi Industry Zone
Cixi, Ningbo City 
Zhejiang Province 315312 
China 
86 574 58960222
Visit this company's website

Facility : Ningbo, China

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings§ +++ [G]
 
PPSU
 
WELDAY PEX
 
ASTM F877

FPT Plastic Adapter
3/4" PEX x 1/2" (35264)  

Faucet Adapter Elbow
3/4" PEX x 1/2" (32564)  

MPT Plastic Adapter
3/8" PEX x 3/8" (34033)   1/2" PEX x 3/8" (34043)  

MPT Plastic Elbow
3/8" PEX x 3/8" (34133)   3/8" PEX x 1/2" (34134)   1/2" PEX x 3/4" (34146)  

Multiport Tees - Closed
3/4" x 3/4" x 1/2" 2 PORTS CLOSED(3MA64C-2B)   3/4" x 3/4" x 1/2" 3 PORTS CLOSED(3MA64C-3B)   3/4" x 3/4" x 1/2" 4 PORTS CLOSED (3MA64-2D)   1" x 1" x 1/2" 6 PORTS CLOSED (3MA64B-3L)  

Multiport Tees - Open
3/4" x 3/4" x 1/2" 2 PORTS OPEN(3MA64-2B)   3/4" x 3/4" x 1/2" 3 PORTS OPEN (3MA64B-4L)  

NPSM Plastic Swivel Elbow
1/2" PEX x 3/4" (32546)   1" PEX x 3/4" NPSM Swivel Elbow (32576)  

Plastic Adapter
3/8" PEX x 1/2" (35234)   3/8" PEX x 1/2" MPT (34034)   1/2" PEX x 1/2" FPT (35244)   1/2" PEX x 1/2" MPT (34044)  
1/2" PEX x 3/4" FPT (35246)   3/4" PEX x 1/2" MPT (34064)    3/4" PEX x 3/4" FPT (35266)   3/4" PEX x 3/4" MPT (34066)  
3/4" PEX x 1" FPT (35267)   3/4" PEX x 1" MPT (34067)   1" PEX x 3/4" MPT (34076)   1" PEX x 1" FPT (35277)  
1" PEX x 1" MPT (34077)   1/2" PEX x 3/4" MPT (34046)   

Plastic Elbow
1/2" PEX x 1/2" MPT (34144)    1/2" PEX x 3/8" MPT (34143)    3/4" PEX x 1/2" MPT (34164)    3/4" PEX x 3/4" MPT (34166)   
1" PEX x 3/4" MPT (34176)  

Plastic PEX Coupling
3/8" (33133)   3/8" x 1/2" (33443)   3/4" x 1/2" (33464)   1/2" (33144)  
3/4" (33166)   1" x 3/4" (33476)   1" (33177)   1" x 1/2" (33474)   
1 1/4" x 1" (33487)   1 1/4" x 1 1/4" (33188)   1 1/2" x 1" (33497)   1 1/2" x 1 1/4" (33498)  
1 1/2" x 1 1/2" (33199)   2" x 1 1/2" (33409)   2" x 2" (33100)  

Plastic PEX Elbow
3/8" (32133)   3/4" x 1/2" (32064)   1/2" (32144)   1/2" x 3/8" (32143)  
3/4" (32166)   1" (32177)   1" x 3/4" (32176)   1 1/4" x 1 1/4" (32188)  
1 1/2" x 1 1/2" (32199)   2" x 2" (32100)  

Plastic PEX Plug
3/8" (30030)    1/2" (35050)    3/4" (35075)   1" (30060)  

Plastic PEX Tee
3/8" (31103)   3/8" x 3/8" x 1/2" (39334)   1/2" (31104)   1/2" x 3/8" x 3/8" (39433)  
1/2" x 3/8" x 1/2" (39434)   1/2" x 1/2" x 3/8" (39443)   1/2" PEX x 1/2" MPT x 1/2" MPT (37444)   1/2" PEX x 1/2" PEX x 1/2" MPT (38444)  
1/2" x 1/2" x 3/4" (39446)   3/4" (31106)   3/4" x 1/2" x 1/2" (39644)   3/4" x 1/2" x 3/4" (39646)  
3/4" x 1/2" x 3/4"(39646-2)   3/4" x 3/4" x 3/8" (39663)   3/4" PEX x 3/4" PEX x 1/2" MPT (38644)   3/4" x 3/4" x 1/2" (39664)  
3/4" x 3/4" x 1" (39667)    1" (31107)   1" x 1/2" x 3/4" (39746)   1" x 1/2" x 1" (39747)  
1" x 3/4" x 3/4" (39766)   1" x 3/4" x 1/2" (39764)   1" x 3/4" x 1" (39767)   1" x 1" x 1/2" (39774)  
1" x 1" x 3/4" (39776)   1 1/4" x 1 1/4" x 3/4" (39886)   1 1/4" x 1 1/4" x 1" (39887)   1 1/2" x 1 1/2" x 3/4" (39996)  
1 1/2" x 1 1/2" x 1" (39997)   1 1/2" x 1 1/2" x 1 1/2" (31109)   1 1/4" x 1 1/4" x 1 1/4" (31108)   2" x 2" x 3/4" (39006)  
2" x 2" x 1" (39007)   2" x 2" x 2" (31100)  

Plastic Swivel Adapter
3/8" PEX x 1/2" (35134)   1/2" PEX x 1/2" FPT (35144)   1/2" PEX x 3/4" (35146)   1/2" PEX x 7/8" FPT (35145)  
3/4" PEX x 3/4" FPT (35166)  

Plastic Swivel Elbow
1/2" PEX x 1/2" FPT (32544)   3/4" PEX x 3/4" FPT (32566)   

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+ § [G]
 
PPSU
 
UNIPEX
 
ASTM F877

Plastic Adapter
1/2" PEX x 1/2" MPT (2400M)   3/4" PEX x 3/4" MPT (2400M)   3/4" PEX x 1/2" MPT (2400M)    1/2" PEX x 3/4" MPT (2400M)   
1" PEX x 1" MPT (2400M)  

Plastic Elbow
1/2" PEX x 3/8" MPT (2491)    1/2" PEX x 1/2" MPT (2491)    3/4" PEX x 1/2" MPT (2491)    3/4" PEX x 3/4" MPT (2491)   

Plastic PEX Coupling
3/4" x 1/2" (2400)   1/2" (2400)   3/4" (2400)   1" x 3/4" (2400)  
1" (2400)   1" x 1/2" (2400)   

Plastic PEX Elbow
3/4" x 1/2" (2490)   1/2" (2490)   3/4" (2490)   1" (2490)  

Plastic PEX Plug
3/8" (2402)    1/2" (2402)    3/4" (2402)   1" (2402)  

Plastic PEX Tee
1/2" (2430)   1/2" x 1/2" x 3/4" (2430)   3/4" (2430)   3/4" x 1/2" x 1/2" (2430)  
3/4" x 1/2" x 3/4" (2430)   3/4" x 3/4" x 1/2" (2430)   3/4" x 3/4" x 1" (2430)    1" (2430)  
1" x 3/4" x 3/4" (2430)   1" x 3/4" x 1" (2430)   1" x 1" x 1/2" (2430)   1" x 1" x 3/4" (2430)  

Plastic Swivel Adapter
1/2" PEX x 1/2" FPT (2400F)   3/4" PEX x 3/4" FPT (2400F)  

Plastic Swivel Elbow
1/2" PEX x 1/2" FPT (2492)   3/4" PEX x 3/4" FPT (2492)   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Manifolds§ +++ [G]
 
PPSU
 
WELDAY PEX
 
ASTM F877

Multiport Tees - Closed
3/4" x 3/4" x 1/2" 4 PORTS CLOSED (3MA64C-4B)   1" x 1" x 1/2" 6 PORTS CLOSED (3MA74C-6B)  

Multiport Tees - Open
3/4" x 3/4" x 1/2" 3 PORTS OPEN (3MA64-3B)   3/4" x 3/4" x 1/2" 4 PORTS OPEN (3MA64-4B)   3/4" x 3/4" x 1/2" 6 PORTS OPEN (3MA64-6B)  

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



Cixi Yin Tu Metal Product Company Limited 
Nong Ken Chang, Nong Ken Road #209
Longshan Town, Cixi City, Zhejiang 
China 

Facility : # 1 China

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings¢ § +++ [G]
 
Brass
 
U-PEX
 
ASTM F877

Brass Compression Adapters
U3043-LF 1/2" PEX x 3/8" OD Comp. Chrome Adapter Lead Free   U3045-LF 1/2" PEX x 5/8" OD Comp. Brass Adapter Lead Free  

Brass Compression Elbows
U2843-LF 1/2" PEX x 3/8" OD Comp. 90 Elbow Brass Adapter Lead Free  

Brass Compression Tee
U8254-LF 5/8" OD Comp. x 5/8" OD Comp. x 1/2" PEX Tee Lead Free  

Brass Coupling
U3100-LF 2" PEX Brass Coupling Lead Free   U3109-LF 2" x 1-1/2" PEX Brass Reducing Coupling Lead Free   U3133-LF 3/8" PEX Brass Coupling Lead Free   U3143-LF 1/2" x 3/8" PEX Brass Reducing Coupling Lead Free  
U3144-LF 1/2" PEX Brass Coupling Lead Free   U3154-LF 5/8" x 1/2" PEX Brass Reducing Coupling Lead Free   U3155-LF 5/8" PEX Brass Coupling Lead Free   U3164-LF 3/4" x 1/2" PEX Brass Reducing Coupling Lead Free  
U3165-LF 3/4" x 5/8" PEX Brass Reducing Coupling Lead Free   U3166-LF 3/4" PEX Brass Coupling Lead Free   U3175-LF 1" x 5/8" PEX Brass Reducing Coupling Lead Free   U3176-LF 1" x 3/4" PEX Brass Reducing Coupling Lead Free  
U3177-LF 1" PEX Brass Coupling Lead Free   U3186-LF 1 1/4" x 3/4" PEX Brass Reducing Coupling Lead Free   U3187-LF 1 1/4" x 1" PEX Brass Reducing Coupling Lead Free   U3188-LF 1 1/4" PEX Brass Coupling Lead Free  
U3198-LF 1-1/2" x 1-1/4" PEX Brass Reducing Coupling Lead Free   U3199-LF 1 1/2" PEX Brass Coupling Lead Free  

Brass Elbow
U2100-LF 2" PEX Brass Elbow Lead Free   U2109-LF 2" X 1-1/2" Pex Brass Reducing 90 Elbow Lead Free   U2133-LF 3/8" PEX Brass Elbow Lead Free   U2143-LF 1/2" X 3/8" Pex Brass Reducing 90 Elbow Lead Free  
U2144-LF 1/2" PEX Brass Elbow Lead Free   U2154-LF 5/8" x 1/2" PEX Brass Reducing 90 Elbow Lead Free   U2155-LF 5/8 PEX Brass Elbow Lead Free   U2164-LF 3/4" x 1/2" PEX Brass Reducing 90 Elbow Lead Free  
U2165-LF 3/4" x 5/8" PEX Brass Reducing 90 Elbow Lead Free   U2166-LF 3/4" PEX Brass Elbow Lead Free   U2176-LF 1" x 3/4" PEX Brass Reducing 90 Elbow Lead Free   U2177-LF 1" PEX Brass Elbow Lead Free  
U2187-LF 1 1/4" x 1" PEX Brass Reducing 90 Elbow Lead Free   U2188-LF 1 1/4" PEX Brass Elbow Lead Free   U2198-LF 1 1/2" x 1-1/4" PEX Brass Reducing 90 Elbow Lead Free   U2199-LF 1 1/2" PEX Brass Elbow Lead Free  

Brass Female Adapter
U5200-LF 2" PEX x 2" FIP Brass Adapter Lead Free   U5209-LF 2" PEX x 1-1/2" FIP Brass Adapter Lead Free   U5233-LF 3/8" PEX x 3/8" FIP Brass Adapter Lead Free   U5234-LF 3/8" PEX x 1/2" FIP Brass Adapter Lead Free  
U5243-LF 1/2" PEX x 3/8" FIP Brass Adapter Lead Free   U5244-LF 1/2" PEX x 1/2" FIP Brass Adapter Lead Free   U5246-LF 1/2" PEX x 3/4" FIP Brass Adapter Lead Free   U5254-LF 5/8" PEX x 1/2" FIP Brass Adapter Lead Free  
U5255-LF 5/8" PEX x 5/8" FIP Brass Adapter Lead Free   U5256-LF 5/8" PEX x 3/4" FIP Brass Adapter Lead Free   U5264-LF 3/4" PEX x 1/2" FIP Brass Adapter Lead Free   U5266-LF 3/4" PEX x 3/4" FIP Brass Adapter Lead Free  
U5267-LF 3/4" PEX x 1" FIP Brass Adapter Lead Free   U5276-LF 1" PEX x 3/4" FIP Brass Adapter Lead Free   U5277-LF 1" PEX x 1" FIP Brass Adapter Lead Free   U5278-LF 1" PEX x 1 1/4" FIP Brass Adapter Lead Free  
U5287-LF 1 1/4" PEX x 1" FIP Brass Adapter Lead Free   U5288-LF 1 1/4" PEX x 1 1/4" FIP Brass Adapter Lead Free   U5289-LF 1-1/4" PEX x 1 1/2" FIP Brass Adapter Lead Free   U5290-LF 1-1/2" PEX x 2" FIP Brass Adapter Lead Free  
U5298-LF 1-1/2" PEX x 1-1/4" FIP Brass Adapter Lead Free   U5299-LF 1-1/2" PEX x 1-1/2" FIP Brass Adapter Lead Free  

Brass Female Elbow
U2333-2-LF 3/8" PEX x 3/8" FIP Brass Drop Ear Elbow Lead Free 2 Ears   U2333-LF 3/8" PEX x 3/8" FIP Brass Drop Ear Elbow Lead Free   U2334-2-LF 3/8" PEX x 1/2" FIP Brass Drop Ear Elbow Lead Free 2 Ears   U2334-LF 3/8" PEX x 1/2" FIP Brass Drop Ear Elbow Lead Free  
U2343-2-LF 1/2" PEX x 3/8" FIP Brass Drop Ear Elbow Lead Free 2 Ears   U2343-LF 1/2" PEX x 3/8" FIP Brass Drop Ear Elbow Lead Free   U2344-2-LF 1/2" PEX x 1/2" FIP Brass Drop Ear Elbow Lead Free 2 Ears   U2344-LF 1/2" PEX x 1/2" FIP Brass Drop Ear Elbow Lead Free  
U2346-2-LF 1/2" PEX x 3/4" FIP Brass Drop Ear Elbow Lead Free 2 Ears   U2346-LF 1/2" PEX x 3/4" FIP Brass Drop Ear Elbow Lead Free   U2354-2-LF 5/8" PEX x 1/2" FIP Brass Drop Ear Elbow Lead Free 2 Ears   U2354-LF 5/8" PEX x 1/2" FIP Brass Drop Ear Elbow Lead Free  
U2356-2-LF 5/8" PEX x 3/4" FIP Brass Drop Ear Elbow Lead Free 2 Ears   U2356-LF 5/8" PEX x 3/4" FIP Brass Drop Ear Elbow Lead Free   U2364-2-LF 3/4" PEX x 1/2" FIP Brass Drop Ear Elbow Lead Free 2 Ears   U2364-LF 3/4" PEX x 1/2" FIP Brass Drop Ear Elbow Lead Free  
U2366-2-LF 3/4" PEX x 3/4" FIP Brass Drop Ear Elbow Lead Free 2 Ears   U2366-LF 3/4" PEX x 3/4" FIP Brass Drop Ear Elbow Lead Free   U2377-2-LF 1" PEX x 1" FIP Brass Drop Ear Elbow Lead Free 2 Ears   U2377-LF 1" PEX x 1" FIP Brass Drop Ear Elbow Lead Free  

Brass Male Adapter
U4000-LF 2" PEX x 2" MIP Brass Adapter Lead Free   U4009-LF 2" PEX x 1-1/2" MIP Brass Adapter Lead Free   U4033-LF 3/8" PEX x 3/8" MIP Brass Adapter Lead Free   U4034-LF 3/8" PEX x 1/2" MIP Brass Adapter Lead Free  
U4043-LF 1/2" PEX x 3/8" MIP Brass Adapter Lead Free   U4044-LF 1/2" PEX x 1/2" MIP Brass Adapter Lead Free   U4046-LF 1/2" PEX x 3/4" MIP Brass Adapter Lead Free   U4054-LF 5/8" PEX x 1/2" MIP Brass Adapter Lead Free  
U4056-LF 5/8" PEX x 3/4" MIP Brass Adapter Lead Free   U4064-LF 3/4" PEX x 1/2" MIP Brass Adapter Lead Free   U4066-LF 3/4" PEX x 3/4" MIP Brass Adapter Lead Free   U4067-LF 3/4" PEX x 1" MIP Brass Adapter Lead Free  
U4076-LF 1" PEX x 3/4" MIP Brass Adapter Lead Free   U4077-LF 1" PEX x 1" MIP Brass Adapter Lead Free   U4078-LF 1" PEX x 1 1/4" MIP Brass Adapter Lead Free   U4087-LF 1 1/4" PEX x 1" MIP Brass Adapter Lead Free  
U4088-LF 1 1/4" PEX x 1 1/4" MIP Brass Adapter Lead Free   U4089-LF 1-1/4" PEX x 1-1/2" MIP Brass Adapter Lead Free   U4090-LF 1-1/2" PEX x 2" MIP Brass Adapter Lead Free   U4098-LF 1-1/2" PEX x 1-1/4" MIP Brass Adapter Lead Free  
U4099-LF 1-1/2" PEX x 1-1/2" MIP Brass Adapter Lead Free  

Brass Male Elbow
U2233-LF 3/8" PEX x 3/8" MIP Brass 90 Elbow Lead Free   U2234-LF 3/8" PEX x 1/2" MIP Brass 90 Elbow Lead Free   U2243-LF 1/2" PEX x 3/8" MIP Brass 90 Elbow Lead Free   U2244-LF 1/2" PEX x 1/2" MIP Brass 90 Elbow Lead Free  
U2246-LF 1/2" PEX x 3/4" MIP Brass 90 Elbow Lead Free   U2254-LF 5/8" PEX x 1/2" MIP Brass 90 Elbow Lead Free   U2266-LF 3/4" PEX x 3/4" MIP Brass 90 Elbow Lead Free   U2267-LF 3/4" PEX x 1" MIP Brass 90 Elbow Lead Free  
U2276-LF 1" PEX x 3/4" MIP Brass 90 Elbow Lead Free   U2277-LF 1" PEX x 1" MIP Brass 90 Elbow Lead Free  

Brass Plug
U6003-LF 3/8" PEX Brass Plug Lead Free   U6004-LF 1/2" PEX Brass Plug Lead Free   U6005-LF 5/8" PEX Brass Plug Lead Free   U6006-LF 3/4" PEX Brass Plug Lead Free  
U6007-LF 1" PEX Brass Plug Lead Free   U6008-LF 1-1/4" PEX Brass Plug Lead Free   U6009-LF 1-1/2" PEX Brass Plug Lead Free   U6000-LF 2" PEX Brass Plug Lead Free  

Brass Sweat Adapter
U3200-LF 2" PEX x 2" Male Sweat Brass Adapter Lead Free   U3209-LF 2" PEX x 1-1/2" Male Sweat Brass Adapter Lead Free   U3233-LF 3/8" PEX x 3/8" Male Sweat Brass Adapter Lead Free   U3234-LF 3/8" PEX x 1/2" Male Sweat Brass Adapter Lead Free  
U3243-LF 1/2" PEX x 3/8" Male Sweat Brass Adapter Lead Free   U3244-LF 1/2" PEX x 1/2" Male Sweat Brass Adapter Lead Free   U3245-LF 1/2" PEX x 5/8" Male Sweat Brass Adapter Lead Free   U3246-LF 1/2" PEX x 3/4" Male Sweat Brass Adapter Lead Free  
U3254-LF 5/8" PEX x 1/2" Male Sweat Brass Adapter Lead Free   U3255-LF 5/8" PEX x 5/8" Male Sweat Brass Adapter Lead Free   U3256-LF 5/8" PEX x 3/4" Male Sweat Brass Adapter Lead Free   U3264-LF 3/4" PEX x 1/2" Male Sweat Brass Adapter Lead Free  
U3265-LF 3/4" PEX x 5/8" Male Sweat Brass Adapter Lead Free   U3266-LF 3/4" PEX x 3/4" Male Sweat Brass Adapter Lead Free   U3267-LF 3/4" PEX x 1" Male Sweat Brass Adapter Lead Free   U3276-LF 1" PEX x 3/4" Male Sweat Brass Adapter Lead Free  
U3277-LF 1" PEX x 1" Male Sweat Brass Adapter Lead Free   U3278-LF 1" PEX x 1 1/4" Male Sweat Brass Adapter Lead Free   U3287-LF 1-1/4" PEX x 1" Male Sweat Brass Adapter Lead Free   U3288-LF 1 1/4" PEX x 1 1/4" Male Sweat Brass Adapter Lead Free  
U3289-LF 1-1/4" PEX x 1 1/2" Male Sweat Brass Adapter Lead Free   U3290-LF 1-1/2" PEX x 2" Male Sweat Brass Adapter Lead Free   U3298-LF 1-1/2" PEX x 1-1/4" Male Sweat Brass Adapter Lead Free   U3299-LF 1-1/2" PEX x 1-1/2" Male Sweat Brass Adapter Lead Free  
U3300-LF 2" PEX x 2" Male Sweat Brass Adapter Lead Free   U3309-LF 2" PEX x 1-1/2" Male Sweat Brass Adapter Lead Free   U3333-LF 3/8" PEX x 3/8" Male Sweat Brass Adapter Lead Free   U3334-LF 3/8" PEX x 1/2" Female Sweat Brass Adapter Lead Free  
U3343-LF 1/2" PEX x 3/8" Female Sweat Brass Adapter Lead Free   U3344-LF 1/2" PEX x 1/2" Female Sweat Brass Adapter Lead Free   U3345-LF 1/2" PEX x 5/8" Female Sweat Brass Adapter Lead Free   U3346-LF 1/2" PEX x 3/4" Female Sweat Brass Adapter Lead Free  
U3354-LF 5/8" PEX x 1/2" Female Sweat Brass Adapter Lead Free   U3355-LF 5/8" PEX x 5/8" Female Sweat Brass Adapter Lead Free   U3356-LF 5/8" PEX x 3/4" Female Sweat Brass Adapter Lead Free   U3364-LF 3/4" PEX x 1/2" Female Sweat Brass Adapter Lead Free  
U3365-LF 3/4" PEX x 5/8" Female Sweat Brass Adapter Lead Free   U3366-LF 3/4" PEX x 3/4" Female Sweat Brass Adapter Lead Free   U3367-LF 3/4" PEX x 1" Female Sweat Brass Adapter Lead Free   U3376-LF 1" PEX x 3/4" Female Sweat Brass Adapter Lead Free  
U3377-LF 1" PEX x 1" Female Sweat Brass Adapter Lead Free   U3378-LF 1" PEX x 1-1/4" Female Sweat Brass Adapter Lead Free   U3387-LF 1-1/4" PEX x 1" Female Sweat Brass Adapter Lead Free   U3388-LF 1-1/4" PEX x 1-1/4" Female Sweat Brass Adapter Lead Free  
U3389-LF 1-1/4" PEX x 1-1/2" Female Sweat Brass Adapter Lead Free   U3390-LF 1-1/2" PEX x 2" Female Sweat Brass Adapter Lead Free   U3398-LF 1-1/2" PEX x 1-1/4" Female Sweat Brass Adapter Lead Free   U3399-LF 1-1/2" PEX x 1-1/2" Female Sweat Brass Adapter Lead Free  

Brass Swivel
U2434-LF 3/8" PEX x 1/2" FIP Brass Swivel 90 Elbow w/ Plastic Nut Lead Free   U2444-LF 1/2" PEX x FIP Brass Swivel 90 Elbow w/ Plastic Nut Lead Free   U2534-LF 3/8" PEX x 1/2" FIP Brass Swivel 90 Elbow w/ Brass Nut Lead Free   U2544-LF 1/2" PEX x FIP Brass Swivel 90 Elbow Wf Plastic Nut Lead Free  
U5134-LF 3/8" PEX x 1/2" FIP Brass Swivel Adapter Brass Nut Lead Free   U5144-LF 1/2" PEX x 1/2" FIP Brass Swivel Adapter Brass Nut Lead Free   U5146-LF 1/2" PEX x 3/4" FIP Brass Swivel Adapter Brass Nut Lead Free   U5166-LF 3/4" PEX x 3/4" FIP Brass Swivel Adapter Brass Nut Lead Free  
U6134-LF 3/8" PEX x 1/2" FIP Brass Swivel Adapter Plastic Nut Lead Free   U6144-LF 1/2" PEX x 1/2" FIP Brass Swivel Adapter Plastic Nut Lead Free   U6146-LF 1/2" PEX x 3/4" FIP Brass Swivel Adapter Plastic Nut Lead Free   U6166-LF 3/4" PEX x 3/4" FIP Brass Swivel Adapter Plastic Nut Lead Free  

PB PEX Adapter
U3833-LF 3/8" PEX x 3/8" PB Brass Coupling c/w Crimp Rings Lead Free   U3844-LF 1/2" PEX x 1/2" PB Brass Coupling c/w Crimp Rings Lead Free   U3866-LF 3/4" PEX x 3/4" PB Brass Coupling c/w Crimp Rings Lead Free   U3877-LF 1" PEX x 1" PB Brass Coupling c/w Crimp Rings Lead Free  

PB PEX Tee
U8144-LF 1/2" PB x 1/2" PB x 1/2" PEX Brass Lead Free Tee   U8164-LF 3/4" PB x 3/4" PB x 1/2" PEX Brass Lead Free Tee   U8166-LF 3/4" PB x 3/4" PB x 3/4" PEX Brass Lead Free Tee  

PEX FPT Tee
U8344-LF 1/2" PEX X 1/2" PEX X 1/2" FIP Brass Cross Tee Lead Free   U8346-LF 1/2" PEX X 1/2" PEX X 3/4" FIP Brass Cross Tee Lead Free   U8364-LF 3/4" PEX X 3/4" PEX X 1/2" FIP Brass Cross Tee Lead Free   U8366-LF 3/4" PEX X 3/4" PEX X 3/4" FIP Brass Cross Tee Lead Free  
U8377-LF 1" PEX X 1" PEX X 1" FIP Brass Cross Tee Lead Free  

PEX MPT Tee
U8433-LF 3/8" PEX x 3/8" PEX x 3/8" MPT Brass Lead Free Tee   U8444-LF 1/2" PEX x 1/2" PEX x 1/2" MPT Brass Lead Free Tee   U8466-LF 3/4" PEX x 3/4" PEX x 3/4" MPT Brass Lead Free Tee   U8477-LF 1" PEX x 1" PEX x 1" MPT Brass Lead Free Tee  
U8488-LF 1-1/4" PEX x 1-1/4" PEX x 1-1/4" MPT Brass Lead Free Tee  

PEX Sweat Tee
U8544-LF 1/2" Sweat x 1/2" Sweat x 1/2" PEX Brass Tee Lead Free  

PEX Tee
U9000-LF 2" PEX Brass Tee Lead Free   U9007-LF 2" x 2" x 1" PEX Brass Tee Lead Free   U9008-LF 2" x 2" x 1-1/4" PEX Brass Tee Lead Free   U9009-LF 2" x 2" x 1-1/2" PEX Brass Tee Lead Free  
U9088-LF 2" x 1-1/4" x 1-1/4" PEX Brass Tee Lead Free   U9089-LF 2" x 1-1/4" x 1-1/2" PEX Brass Tee Lead Free   U9090-LF 2" x 1-1/2" x 2" PEX Brass Tee Lead Free   U9098-LF 2" x 1-1/2" x 1-1/4" PEX Brass Tee Lead Free  
U9099-LF 2" x 1-1/2" x 1-1/2" PEX Brass Tee Lead Free   U9333-LF 3/8" PEX Brass Tee Lead Free   U9334-LF 3/8" x 3/8" x 1/2" PEX Brass Tee Lead Free   U9433-LF 1/2" x 3/8" x 3/8" PEX Brass Tee Lead Free  
U9434-LF 1/2" x 3/8" x 1/2" PEX Brass Tee Lead Free   U9443-LF 1/2" x 1/2" x 3/8" PEX Brass Tee Lead Free   U9444-LF 1/2" PEX Brass Tee Lead Free   U9445-LF 1/2" x 1/2" x 5/8" PEX Brass Tee Lead Free  
U9446-LF 1/2" x 1/2" x 3/4" PEX Brass Tee Lead Free   U9447-LF 1/2" x 1/2" x 1" PEX Brass Tee Lead Free   U9544-LF 5/8" x 1/2" x 1/2" PEX Brass Tee Lead Free   U9545-LF 5/8" x 1/2" x 5/8" PEX Brass Tee Lead Free  
U9554-LF 5/8" x 5/8" x 1/2" PEX Brass Tee Lead Free   U9555-LF 5/8" PEX Brass Tee Lead Free   U9644-LF 3/4" x 1/2" x 1/2" PEX Brass Tee Lead Free   U9646-LF 3/4" x 1/2" x 3/4" PEX Brass Tee Lead Free  
U9664-LF 3/4" x 3/4" x 1/2" PEX Brass Tee Lead Free   U9666-LF 3/4" PEX Brass Tee Lead Free   U9667-LF 3/4" x 3/4" x 1" PEX Brass Tee Lead Free   U9744-LF 1" x 1/2" x 1/2" PEX Brass Tee Lead Free  
U9746-LF 1" x 1/2" x 3/4" PEX Brass Tee Lead Free   U9747-LF 1" X 1/2" x 1" Pex Brass Tee Lead Free   U9764-LF 1" x 3/4" X 1/2" PEX Brass Tee Lead Free   U9766-LF 1" x 3/4" x 3/4" PEX Brass Tee Lead Free  
U9774-LF 1" x 1" x 1/2" PEX Brass Tee Lead Free   U9776-LF 1" x 1" x 3/4" PEX Brass Tee Lead Free   U9777-LF 1" PEX Brass Tee Lead Free   U9778-LF 1" x 1" x 1-1/4" PEX Brass Tee Lead Free  
U9877-LF 1 1/4" X 1" X 1" Pex Brass Tee Lead Free   U9878-LF 1 1/4" X 1" X 1 1/4" Pex Brass Tee Lead Free   U9886-LF 1-1/4" X 1-1/4" X 3/4" Pex Brass Tee Lead Free   U9887-LF 1 1/4" X 1 1/4" X 1" Pex Brass Tee Lead Free  
U9888-LF 1 1/4" Brass Tee Lead Free   U9889-LF 1-1/4" X 1-1/4" X 1-1/2" Pex Brass Tee Lead Free   U9988-LF 1-1/2" X 1-1/4" X 1-1/4" Pex Brass Tee Lead Free   U9989-LF 1-1/2" X 1-1/4" X 1-1/2" Pex Brass Tee Lead Free  
U9990-LF 1-1/2" X 1-1/2" X 2" Pex Brass Tee Lead Free   U9996-LF 1-1/2" X 1-1/2" X 3/4" Pex Brass Tee Lead Free   U9997-LF 1-1/2" X 1-1/2" X 1" Pex Brass Tee Lead Free   U9998-LF 1-1/2" X 1-1/2" X 1-1/4" Pex Brass Tee Lead Free  
U9999-LF 1 1/2" Brass Tee Lead Free  

Sweat Elbow
U2044-LF 1/2" PEX x 1/2" Copper Sweat Brass 90 Elbow Lead Free   U2046-LF 1/2" PEX x 3/4" Copper Sweat Brass 90 Elbow Lead Free   U2056-LF 5/8" PEX x 3/4" Copper Sweat Brass 90 Elbow Lead Free   U2064-LF 3/4" PEX x 1/2" Copper Sweat Brass 90 Elbow Lead Free  
U2066-LF 3/4" PEX x 3/4" Copper Sweat Brass 90 Elbow Lead Free   U2067-LF 3/4" PEX x 1" Copper Sweat Brass 90 Elbow Lead Free   U2076-LF 1" PEX x 3/4" Copper Sweat Brass 90 Elbow Lead Free   U2077-LF 1" PEX x 1" Copper Sweat Brass 90 Elbow Lead Free  
U2644-LF 1/2" PEX x 1/2" Male Sweat Brass Elbow Lead Free   U2646-LF 1/2" PEX x 3/4" Male Sweat Brass Elbow Lead Free   U2656-LF 5/8" PEX x 3/4" Male Sweat Brass Elbow Lead Free   U2666-LF 3/4" PEX x 3/4" Male Sweat Brass Elbow Lead Free  
U2744-2-LF 1/2" Sweat x 1/2" FPT Drop Ear Elbow Lead Free 2 Ears   U2744-LF 1/2" Sweat x 1/2" FPT Drop Ear Elbow Lead Free  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Eastern Foundry & Fittings Inc. 
10 Brodie Drive
Unit #1 
Richmond Hill, ON L4B 3K8 
Canada 
877-668-1288 
905-883-6869
Visit this company's website

Facility : Zhejiang, China

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings& ¢ § +++ [G]
 
Brass
 
EFF
 
ASTM F877

Transition Straight Adapter
403444-LF 1/2 IN. CPVC x 1/2 IN. F1960 Straight Adapter   403466-LF 3/4 IN. CPVC x 3/4 IN. F1960 Straight Adapter  

& Product also meets the requirements of ASTM F877.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* § +++ [G]
 
Brass
 
 
ASTM F877

Compression Fitting
81005166-LF 3/8" PEX T-20 Comp. Fitting   81005168-LF 1/2" PEX T-20 Comp. Fitting   81005170-LF 5/8" PEX T-20 Comp. Fitting   81005172-LF 3/4" PEX T-20 Comp. Fitting  

* May also be represented by EFF
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings§ +++ [G]
 
Brass
 
Watts
 
ASTM F877

Compression Fitting
81005166-LF 3/8" PEX T-20 Comp. Fitting   81005168-LF 1/2" PEX T-20 Comp. Fitting   81005170-LF 5/8" PEX T-20 Comp. Fitting   81005172-LF 3/4" PEX T-20 Comp. Fitting  

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

% Product is non-water contact.


 
Everflow Supplies Inc. 
100 Middlesex Avenue
Carteret, NJ 07008 
United States 
908-436-1100

Facility : Foshan, China

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Compression Fittings (F1-G)* § +++
 
MLTPL
 
Everflow
 
ASTM F877
3/8" - 2 1/2"

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Crimp Fittings (PF5-G)* § +++
 
MLTPL
 
Everflow
 
ASTM F877
3/8" - 2 1/2"

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Press Fittings (F5-G)* § +++
 
MLTPL
 
Everflow
 
ASTM F877
3/8" - 2 1/2"

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Press Fittings (PF15)% § +++ [G]
 
MLTPL
 
Everflow
 
ASTM F877
1/8" - 2 1/2"

% Product Listed for use with RIFENG PEX tubing only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Press Fittings (PF15II)% § +++ [G]
 
MLTPL
 
Everflow
 
ASTM F877
1/8" - 2 1/2"

% Product Listed for use with RIFENG PEX tubing only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

PF15% § [2]
 
Brass
 
Everflow
 
ASTM F877
1/8" - 2 1/2"

% Product Listed for use with RIFENG PEX tubing only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[2] This product represents the following configurations:
    Equal Straight Union, PF15c-S, 1/8" - 2 1/2"
    Equal Elbow, PF15c-L, 1/8" - 2 1/2"
    Equal Straight Union PF15c(II)-S, 1/8" - 2-1/2"
    Equal Elbow, PF15c(II)-L, 1/8" - 2-1/2"

PF15(II)% § +++ [2]
 
Brass
 
Everflow
 
ASTM F877
1/8" - 2 1/2"

% Product Listed for use with RIFENG PEX tubing only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[2] This product represents the following configurations:
    Equal Straight Union, PF15c-S, 1/8" - 2 1/2"
    Equal Elbow, PF15c-L, 1/8" - 2 1/2"
    Equal Straight Union PF15c(II)-S, 1/8" - 2-1/2"
    Equal Elbow, PF15c(II)-L, 1/8" - 2-1/2"


Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

Compression Fittings (F1-G)* §
 
MLTPL
 
Everflow
 
ASTM F877
3/8" - 2 1/2"  

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Crimp Fittings (PF5-G)* §
 
MLTPL
 
Everflow
 
ASTM F877
3/8" - 2 1/2"  

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Press Fittings (PF15)% §
 
MLTPL
 
Everflow
 
ASTM F877
1/8" - 2 1/2"  

% Product Listed for use with RIFENG PEX tubing only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Press Fittings (F5-G)* §
 
MLTPL
 
Everflow
 
ASTM F877
3/8" - 2 1/2"  

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Press Fittings (PF15II)% §
 
MLTPL
 
Everflow
 
ASTM F877
1/8''- 2 1/2''  

% Product Listed for use with RIFENG PEX tubing only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

PF15% § [3]
 
Brass
 
Everflow
 
ASTM F877

% Product Listed for use with RIFENG PEX tubing only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[3] This product represents the following configurations:
    Equal Straight Union, PF15c-S, 1/8" - 2 1/2"
    Equal Elbow, PF15c-L, 1/8" - 2 1/2"
    Equal Straight Union PF15c(II)-S, 1/8" - 2-1/2"
    Equal Elbow, PF15c(II)-L, 1/8" - 2-1/2"

PF15(II)% § [3]
 
Brass
 
Everflow
 
ASTM F877

% Product Listed for use with RIFENG PEX tubing only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[3] This product represents the following configurations:
    Equal Straight Union, PF15c-S, 1/8" - 2 1/2"
    Equal Elbow, PF15c-L, 1/8" - 2 1/2"
    Equal Straight Union PF15c(II)-S, 1/8" - 2-1/2"
    Equal Elbow, PF15c(II)-L, 1/8" - 2-1/2"

Fittings§ [1] [2]
 
MLTPL
 
Everflow
 
ASTM F877

Stainless Steel Manifolds
FN16-1F-3/4*n   MPS102   MPS103   MPS104  
MPS105   MPS106   MPS107   MPS108  
MPS109   MPS110   MPS112  

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Main inlet/outlet size: 1"
    Sub inlet/outlet size: 3/4"
[2]  n is the quantity of subway

Fittings§ [1] [2]
 
MLTPL
 
PexFlow
 
ASTM F877

Stainless Steel Manifolds
FN16-1F-3/4*n  

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Main inlet/outlet size: 1"
    Sub inlet/outlet size: 3/4"
[2]  n is the quantity of subway



 
Everhot Inc. 
5407 Foster Avenue
Brooklyn, NY 11234 
United States 
347-492-7660

Facility : # 1 China

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Crimp Fittings* § +++
 
DZR Brass
 
Everhot
 
ASTM F877
1/2" - 1"

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).


Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

Crimp Fittings* §
 
DZR Brass
 
Everhot
 
ASTM F877
1/2" - 1"

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Fittings§ [1] [2]
 
MLTPL
 
Everhot
 
ASTM F877

Stainless Steel Manifolds
SSM211   SSM212   SSM205   SSM204  
SSM203   SSM202   FN16-1F-3/4*n   SSM210  
SSM209   SSM206   SSM207   SSM208  

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Main inlet/outlet size: 1"
    Sub inlet/outlet size: 3/4"
[2] n is the quantity of subway.



 
Ferguson Enterprises, Inc. 
12500 Jefferson Avenue
Newport News, VA 23602 
United States 
757-874-7795

Facility : Marshall, MI

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings! * ¢ § +++ [G]
 
Brass
 
Ferguson
 
ASTM F877

Elbow Drop Ear (FPT)
1/2" x 1/2" PFXPFDE9DD   3/4" X 3/4" PFXPFDE9DF  

! All products may have an optional V and/or B at the end of the part number.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings! § +++ [G]
 
MLTPL
 
Ferguson
 
ASTM F877

Elbow Drop Ear (FPT)
1/2" x 1/2" PFXPPFDE9DD   3/4" X 3/4" PFXPPFDE9DF  

! All products may have an optional V and/or B at the end of the part number.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Heatlink Group 
4306E-13 Street NE
Calgary, AB T2E 6M3 
Canada 
403-717-3820

Facility : # 1 Taiwan

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

SS Press Sleeves! $ ¢ §
 
SS
 
HL Pex
 
ASTM F877
1/2" - 2"

! Product(s) are exempt from bearing the U.P. Code Mark.
$ Sleeves are Certified as a system component using Heatlink's NSF Certified ASTM
  F876/F877 tubing and ASTM F1807 / F2159 fittings.  Product meets the requirements of CSA
  B137.5 when used with Heatlink's NSF Certified CSA B137.5 tubing and fittings.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

SS Press Sleeves! $ ¢ §
 
SS
 
Heatlink SS Press Sleeve
 
ASTM F877
1/2" - 2"

! Product(s) are exempt from bearing the U.P. Code Mark.
$ Sleeves are Certified as a system component using Heatlink's NSF Certified ASTM
  F876/F877 tubing and ASTM F1807 / F2159 fittings.  Product meets the requirements of CSA
  B137.5 when used with Heatlink's NSF Certified CSA B137.5 tubing and fittings.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

SS Press Sleeves! $ ¢ §
 
SS
 
PL
 
ASTM F877
1/2" - 2"

! Product(s) are exempt from bearing the U.P. Code Mark.
$ Sleeves are Certified as a system component using Heatlink's NSF Certified ASTM
  F876/F877 tubing and ASTM F1807 / F2159 fittings.  Product meets the requirements of CSA
  B137.5 when used with Heatlink's NSF Certified CSA B137.5 tubing and fittings.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

SS Press Sleeves! $ ¢ §
 
SS
 
PureLink SS Press Sleeve
 
ASTM F877
1/2" - 2"

! Product(s) are exempt from bearing the U.P. Code Mark.
$ Sleeves are Certified as a system component using Heatlink's NSF Certified ASTM
  F876/F877 tubing and ASTM F1807 / F2159 fittings.  Product meets the requirements of CSA
  B137.5 when used with Heatlink's NSF Certified CSA B137.5 tubing and fittings.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.


Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

SS Press Sleeves! $ ¢ §
 
SS
 
HL Pex
 
ASTM F877
1/2" - 2"

! Product(s) are exempt from bearing the U.P. Code Mark.
$ Sleeves are Certified as a system component using Heatlink's NSF Certified ASTM
  F876/F877 tubing and ASTM F1807 / F2159 fittings.  Product meets the requirements of CSA
  B137.5 when used with Heatlink's NSF Certified CSA B137.5 tubing and fittings.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

SS Press Sleeves! $ ¢ §
 
SS
 
Heatlink SS Press Sleeve
 
ASTM F877
1/2" - 2"

! Product(s) are exempt from bearing the U.P. Code Mark.
$ Sleeves are Certified as a system component using Heatlink's NSF Certified ASTM
  F876/F877 tubing and ASTM F1807 / F2159 fittings.  Product meets the requirements of CSA
  B137.5 when used with Heatlink's NSF Certified CSA B137.5 tubing and fittings.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

SS Press Sleeves! $ ¢ §
 
SS
 
PL
 
ASTM F877
1/2" - 2"

! Product(s) are exempt from bearing the U.P. Code Mark.
$ Sleeves are Certified as a system component using Heatlink's NSF Certified ASTM
  F876/F877 tubing and ASTM F1807 / F2159 fittings.  Product meets the requirements of CSA
  B137.5 when used with Heatlink's NSF Certified CSA B137.5 tubing and fittings.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

SS Press Sleeves! $ ¢ §
 
SS
 
PureLink SS Press Sleeve
 
ASTM F877
1/2" - 2"

! Product(s) are exempt from bearing the U.P. Code Mark.
$ Sleeves are Certified as a system component using Heatlink's NSF Certified ASTM
  F876/F877 tubing and ASTM F1807 / F2159 fittings.  Product meets the requirements of CSA
  B137.5 when used with Heatlink's NSF Certified CSA B137.5 tubing and fittings.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.


Facility : Cavriago, Italy

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

SS Press Sleeves! $ ¢ §
 
SS
 
HL Pex
 
ASTM F877
1/2" - 2"

! Product(s) are exempt from bearing the U.P. Code Mark.
$ Sleeves are Certified as a system component using Heatlink's NSF Certified ASTM
  F876/F877 tubing and ASTM F1807 / F2159 fittings.  Product meets the requirements of CSA
  B137.5 when used with Heatlink's NSF Certified CSA B137.5 tubing and fittings.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

SS Press Sleeves! $ ¢ §
 
SS
 
PL
 
ASTM F877
1/2" - 2"

! Product(s) are exempt from bearing the U.P. Code Mark.
$ Sleeves are Certified as a system component using Heatlink's NSF Certified ASTM
  F876/F877 tubing and ASTM F1807 / F2159 fittings.  Product meets the requirements of CSA
  B137.5 when used with Heatlink's NSF Certified CSA B137.5 tubing and fittings.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

SS Press Sleeves! $ ¢ §
 
SS
 
HeatLink SS Press Sleeve
 
ASTM F877
1/2" - 2"

! Product(s) are exempt from bearing the U.P. Code Mark.
$ Sleeves are Certified as a system component using Heatlink's NSF Certified ASTM
  F876/F877 tubing and ASTM F1807 / F2159 fittings.  Product meets the requirements of CSA
  B137.5 when used with Heatlink's NSF Certified CSA B137.5 tubing and fittings.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

SS Press Sleeves! $ ¢ §
 
SS
 
PureLink SS Press Sleeve
 
ASTM F877
1/2" - 2"

! Product(s) are exempt from bearing the U.P. Code Mark.
$ Sleeves are Certified as a system component using Heatlink's NSF Certified ASTM
  F876/F877 tubing and ASTM F1807 / F2159 fittings.  Product meets the requirements of CSA
  B137.5 when used with Heatlink's NSF Certified CSA B137.5 tubing and fittings.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.


Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

SS Press Sleeves! $ ¢ §
 
SS
 
HL Pex
 
ASTM F877
1/2" - 2"

! Product(s) are exempt from bearing the U.P. Code Mark.
$ Sleeves are Certified as a system component using Heatlink's NSF Certified ASTM
  F876/F877 tubing and ASTM F1807 / F2159 fittings.  Product meets the requirements of CSA
  B137.5 when used with Heatlink's NSF Certified CSA B137.5 tubing and fittings.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

SS Press Sleeves! $ ¢ §
 
SS
 
PL
 
ASTM F877
1/2" - 2"

! Product(s) are exempt from bearing the U.P. Code Mark.
$ Sleeves are Certified as a system component using Heatlink's NSF Certified ASTM
  F876/F877 tubing and ASTM F1807 / F2159 fittings.  Product meets the requirements of CSA
  B137.5 when used with Heatlink's NSF Certified CSA B137.5 tubing and fittings.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

SS Press Sleeves! $ ¢ §
 
SS
 
HeatLink SS Press Sleeve
 
ASTM F877
1/2" - 2"

! Product(s) are exempt from bearing the U.P. Code Mark.
$ Sleeves are Certified as a system component using Heatlink's NSF Certified ASTM
  F876/F877 tubing and ASTM F1807 / F2159 fittings.  Product meets the requirements of CSA
  B137.5 when used with Heatlink's NSF Certified CSA B137.5 tubing and fittings.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

SS Press Sleeves! $ ¢ §
 
SS
 
PureLink SS Press Sleeve
 
ASTM F877
1/2" - 2"

! Product(s) are exempt from bearing the U.P. Code Mark.
$ Sleeves are Certified as a system component using Heatlink's NSF Certified ASTM
  F876/F877 tubing and ASTM F1807 / F2159 fittings.  Product meets the requirements of CSA
  B137.5 when used with Heatlink's NSF Certified CSA B137.5 tubing and fittings.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.



 
Heatlink Group 
3615 32 Street NE
Calgary, AB T1Y 5Y9 
Canada 
800-661-5332 
403-717-3820

Facility : # 1 China

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings§ +++ [G]
 
PPSU
 
HT LNK
 
ASTM F877

Plastic Adapter
1/2" PEX x 1/2" MPT (17505)   3/4" PEX x 3/4" MPT (17522)   3/4" PEX x 1/2" MPT (17525)    1/2" PEX x 3/4" MPT (17552)   

Plastic Elbow
1/2" PEX x 1/2" MPT (18505)   1/2" PEX x 3/8" MPT (18551)   

Plastic PEX Coupling
3/4" x 1/2" (19225)   1/2" (19005)   3/4" (19022)   1" x 3/4" (19282)  
1" (19028)  

Plastic PEX Elbow
3/4" x 1/2" (18225)   1/2" (18005)   3/4" (18002)   1" (18028)  

Plastic PEX Plug
1/2" (15005)    3/4" (15022)   1" (15028)  

Plastic PEX Tee
1/2" (16555)   1/2" x 1/2" x 3/4" (16552)   3/4" (16222)   3/4" x 1/2" x 1/2" (16255)  
3/4" x 1/2" x 3/4" (16252)   3/4" x 3/4" x 1/2" (16225)   3/4" x 3/4" x 1" (16228)   1" (16888)  
1" x 3/4" x 3/4" (16822)   1" x 3/4" x 1" (16828)   1" x 1" x 1/2" (16885)   1" x 1" x 3/4" (16882)  

Plastic Swivel Adapter
1/2" PEX x 1/2" FPT (17705)   3/4" PEX x 3/4" FPT (17722)  

Plastic Swivel Elbow
1/2" PEX x 1/2" FPT (18605)  

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Heatlink Group 
3615 32 Street Northeast
Calgary, AB T1Y 5Y9 
Canada 
403-717-3820
Visit this company's website

Facility : # 3 China

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings§ +++ [G]
 
Brass
 
HT LNKw
 
ASTM F877
25005NL 1/2T PEX Plug   25022NL 3/4T PEX Plug   25028NL 1T PEX Plug   25035NL - Brass Test Plug - 1 1/4"  
25041NL - Brass Test Plug - 1 1/2"   25054NL - Brass Test Plug - 2"   26222NL 3/4T PEX Tee   26225NL 3/4Tx3/4Tx1/2T PEX Tee  
26252NL 3/4" Barb x 1/2" Barb x 3/4" Barb Reducing Tee   26255NL 3/4" Barb x 1/2" Barb x 1/2" Barb Reducing Tee   26332NL Tee - 1 1/4" Barb x 1 1/4" Barb x 3/4" Barb   26333NL Tee - 1 1/4"Barb x 1 1/4" Barb x 1 1/4" Barb  
26338NL 1 1/4" Barb x 1 1/4" Barb x 1" Barb Reducing Tee   26382NL Tee - 1 1/4" Barb x 1" Barb x 3/4" Barb   26388NL Tee - 1 1/4" Barb x 1" Barb x 1" Barb   26422NL Tee - 1 1/2" Barb x 3/4" Barb x 3/4" Barb  
26432NL Tee - 1 1/2" Barb x 1 1/4" Barb x 3/4" Barb   26433NL Tee - 1 1/2" Barb x 1 1/4" Barb x 1 1/4" Barb   26438NL Tee - 1 1/2" Barb x 1 1/4" Barb x 1" Barb   26442NL Tee - 1 1/2" Barb x 1 1/2" Barb x 3/4" Barb  
26443NL Tee - 1 1/2" Barb x 1 1/2" Barb x 1 1/4" Barb   26444NL Tee - 1 1/2" Barb   26448NL Tee - 1 1/2" Barb x 1 1/2" Barb x 1" Barb   26488NL Tee - 1 1/2" BarbX 1" x 1" Barb  
26552NL 1/2Tx1/2Tx3/4T PEX Tee   26555NL 1/2T PEX Tee   26633NL Tee - 2" Barb x 1 1/4" Barb x 1 1/4" Barb   26642NL Tee - 2" Barb x 1 1/2" Barb x 3/4" Barb  
26643NL Tee - 2" Barb x 1 1/2" Barb x 1 1/4" Barb   26644NL Tee - 2" Barb x 1 1/2" Barb x 1 1/2" Barb   26648NL Tee - 2" Barb x 1 1/2" Barb x 1" Barb   26662NL Tee - 2" Barb x 2" Barb x 3/4" Barb  
26663NL Tee - 2" Barb x 2" Barb x 1 1/4" Barb   26664NL Tee - 2" Barb x 2" Barb x 1 1/2" Barb   26666NL Tee - 2" Barb   26668NL Tee - 2" Barb x 2" Barb x 1" Barb  
26822NL 1" Barb x 3/4" Barb x 3/4" Barb Reducing Tee   26882NL 1Tx1Tx3/4T PEX Tee   26885NL 1Tx1Tx1/2T PEX Tee   26888NL 1T PEX Tee  
27105NL 1/2Tx1/2W PEX Male Sweat Coupling   27122NL 3/4Tx3/4M PEX Male Sweat Coupling   27128NL 1Tx1W PEX Male Sweat Coupling   27135NL - 1 1/4" Male Sweat x 1 1/4" Barb  
27141NL - 1 1/2" Male Sweat x 1 1/2" Barb   27154NL - 2" Male Sweat x 2" Barb   27205NL 1/2Tx1/2W PEX Female Sweat Coupling   27222NL 3/4Tx3/4W PEX Female Sweat Coupling  
27228NL 1Tx1W PEX Female Sweat Coupling   27235NL - 1 1/4" Female Sweat x 1 1/4" Barb   27505NL 1/2Tx1/2M PEX Male Coupling   27522NL 3/4Tx3/4M PEX Male Coupling  
27525NL 3/4Tx1/2M PEX Male Coupling   27528NL 1" Barb x 1" MIP Male Adapter   27535NL Male Adapter - 1 1/4" Barb x 1 1/4" MPT   27538NL Male Adapter - 1 1/4" Barb x 1" MPT  
27552NL 1/2Tx3/4M PEX Male Coupling   27554NL Male Adapter - 2" Barb x 2" MPT   27582NL 1Tx3/4M PEX Male Coupling   27605NL 1/2Tx1/2F PEX Female Coupling  
27622NL 3/4Tx3/4F PEX Female Coupling   27628NL 1Tx1F PEX Female Coupling   27635NL - Non-Swivel Adapter - 1 1/4" Barb x 1 1/4" FPT   28005NL 1/2T PEX Elbow  
28022NL 3/4T PEX Elbow   28028NL 1T PEX Elbow   28035NL Elbow - 1 1/4"   28041NL Elbow - 1 1/2"  
28054NL Elbow - 2"   28225NL 1/2Tx3/4T PEX Elbow   28305NL 1/2Tx1/2F PEX Drop Ear Elbow   29005NL 1/2T PEX Coupling  
29022NL 3/4T PEX Coupling   29028NL 1T PEX Coupling   29035NL Coupling - 1 1/4" Barb x 1 1/4" Barb   29041NL Coupling - 1 1/2" COUPLING  
29054NL Coupling - 2" COUPLING   29225NL 1/2Tx3/4T PEX Coupling   29238NL Coupling - 1 1/4" Barb x 1" Barb   29243NL Coupling - 1 1/2" Barb x 1 1/4" Barb  
29248NL Coupling - 1 1/2" x 1" Barb   29263NL Coupling - 2" x 1 1/4" Barb   29264NL Coupling - 2" Barb x 1 1/2" Barb   29282NL 3/4Tx1T PEX Coupling  

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Heatlink Group Inc 
3615 32 Street Northeast
Calgary, AB T2E 6M3 
Canada 
800-661-5332 
403-250-3432

Facility : # 2 China

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings@ ¢ § +++ [G]
 
MLTPL
 
Heatlink
 
ASTM F877

Drop-Ear Elbow
28322NL 3/4" PEX × 3/4" FNPT Drop Ear No Lead Brass Elbow  

@ Product also complies to NSF/ANSI 372.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+ ¢ § [G]
 
MLTPL
 
Heatlink
 
ASTM F877

Brass Drop-Ear Elbow
28305NL 1/2" PEX × 1/2" FNPT Drop Ear No Lead Brass Elbow  

Elbow
28035NL 1-1/4" × 1-1/4" PEX No Lead Brass Elbow  

Elbow Male Thread
28583NL 1" PEX × 1-1/4" MNPT No Lead Brass Elbow  

Equal Tee
26333NL 1-1/4" × 1-1/4" × 1-1/4" PEX No Lead Brass Tee  

Female Adapter
27605NL 1/2" PEX × 1/2" FNPT No Lead Brass Adapter   27622NL 3/4" PEX × 3/4" FNPT No Lead Brass Adapter   27628NL 1" PEX × 1" FNPT No Lead Brass Adapter   27635NL 1-1/4" PEX × 1-1/4" FNPT No Lead Brass Adapter  

Female Sweat
27205NL 1/2" PEX × 1/2" F/Sweat No Lead Brass Adapter   27222NL 3/4" PEX × 3/4" F/Sweat No Lead Brass Adapter   27228NL 1" PEX × 1" F/Sweat No Lead Brass Adapter   27235NL 1-1/4" PEX × 1-1/4" F/Sweat No Lead Brass Adapter  

Male Adapter
27582NL 1" PEX × 3/4" MNPT No Lead Brass Adapter   27528NL 1" PEX × 1" MNPT No Lead Brass Adapter   27538NL 1-1/4" PEX × 1" MNPT No Lead Brass Adapter   27535NL 1-1/4" PEX × 1-1/4" MNPT No Lead Brass Adapter  
27525NL 3/4" PEX × 1/2" MNPT No Lead Brass Adapter  

Male Sweat
27105NL 1/2" PEX × 1/2" M/Sweat No Lead Brass Adapter   27122NL 3/4" PEX × 3/4" M/Sweat No Lead Brass Adapter   27128NL 1" PEX × 1" M/Sweat No Lead Brass Adapter   27135NL 1-1/4" PEX × 1-1/4" M/Sweat No Lead Brass Adapter  

PEX Barb Coupling
29238NL 1-1/4" × 1" PEX No Lead Brass Coupling   29035NL 1-1/4" × 1-1/4" PEX No Lead Brass Coupling  

Tee
26388NL 1-1/4" × 1" × 1" PEX No Lead Brass Tee   26332NL 1-1/4" × 1-1/4" × 3/4" PEX No Lead Brass Tee   26338NL 1-1/4" × 1-1/4" × 1" PEX No Lead Brass Tee  

Test Plug
25035NL 1-1/4" PEX No Lead Brass Plug  

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+ ¢ §
 
MLTPL
 
Heatlink
 
ASTM F877

Brass Drop-Ear Elbow
28305NL 1/2" PEX × 1/2" FNPT Drop Ear No Lead Brass Elbow  

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.



 
IDC Fluid Control Co., Ltd. C/O Ningbo IDC International Trading Co., Ltd. 
Floor 43, Bldg A, Int. Trade Center
Ningbo Chamber of Commerce 
No. 558 of Taikangzhong Rd. 
Yinzhou District, Ningbo 315100,  
China 
86 574 2767 0666
Visit this company's website

Facility : Zhejiang, China

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings@ ¢ § +++ [G]
 
MLTPL
 
IDC
 
ASTM F877

45 Degree Barb Elbow
1 1/2" x 1 1/2" PEX (2XAZc77)   1" Swivel X 3/4" MIP Adapter (2XA1c43)   2" x 2" 45 Degree Barb Elbow (2XAZc88)  

Ballcock Swivel
1/2" PEX x 7/8" (2XAFc27)  

Barb
3/8" O.D. PEX x 3/8" O.D. PEX (2XAMc11)   1/2" O.D. PEX x 1/2" O.D. PEX (2XAMc22)   1/2" PEX Barb x 3/8" O.D. Adapter (2XAVc21)   3/4" O.D. PEX x 3/4" O.D. PEX (2XAMc33)  
1" O.D. PEX x 1" O.D. PEX (2XAMc44)  

Brass Adapter (MXM NPT)
1/2" x 3/8" Hex Nipple (2CBAc21)   1/2" x 1/2" Hex Nipple (2CBAc22)   3/4" x 3/8" Hex Nipple (2CBAc31)   3/4" x 1/2" Hex Nipple (2CBAc32)  
3/4" x 3/4" Hex Nipple (2CBAc33)   1" x 1/2" Hex Nipple (2CBAc43)   1" x 3/4" Hex Nipple (2CBAc43)   1" x 1" Hex Nipple (2CBAc44)  
1 1/4" x 3/4" Hex Nipple (2CBAc53)   1 1/4" x 1" Hex Nipple (2CBAc54)  

Brass Coupling
1" BRASS COUPLING W/ STOP / 1" PEX Separator (2XAAe44)   1 1/4" BRASS COUPLING W/ STOP / 1 1/4" PEX Separator (2XAAe09)  

Brass Elbow Female Thread
1/2" PEX x 1/2" FIP (2XAWc22)   1/2" PEX x 3/4" FIP (2XAWc23)   3/4" PEX X 1/2" FIP (2XAWc32)   3/4" PEX X 3/4" FIP (2XAWc33)  

Brass Elbow Male Thread
3/4" Barb X 1/2" MPT (2XATc32)  

Brass Female Adapter
3/4" PEX x 1" FPT (2XACc34)   1" PEX x 1/2" FPT (2XACc42)   1 1/4" Barb x 3/4" FPT (2XACc13)   1 1/4" Barb x 1" FPT (2XACc14)  
2" Barb x 2" FPT (2XACc88)  

Brass Female Branch Tee
1" PEX x 1" PEX x 1/2" FPT (2XAYc42)  

Brass Sweat Adapter
3/4" PEX x 1" FEMALE SWEAT (2XAEc34)  

Brass Sweat Female Elbow
1/2" PEX x 1/2" FEMALE SWEAT ELBOW (2XALc22)  

Brass Swivel Adapter
1" SWIVEL x 3/4" MIP ADAPTER (2XAFd53)  

Brass Swivel Elbow w/ Brass Nut
3/4" PEX x 1/2" FIP Swivel Cone Connection (2XAPc32)   1/2" PEX x3/4" FGHT Swivel Cone connection (2XAPi23)  

Coupling
3/8" PEX x 3/8" PB (2XAUc11)   1/2" PEX x 1/2" PB (2XAUc22)   3/4" PEX x 3/4" PB (2XAUc33)  

Drop-Ear Elbow
1/2" PEX x 1/2" FPT (2XANc22)   1/2" PEX x 3/8" FPT Swivel (2XANc21)   1/2" PEX x 1/2" FPT Swivel (2XANe22)   3/4" x 1/2" FPT PEX Brass (2XANc32)  
3/4" PEX x 3/4" FPT (2XANc33)  

Elbow
3/8" (2XAHc11)   3/8" x 1/2" (2XAHc12)   1/2" (2XAHc22)   5/8" Elbow (2XAHc23)  
3/4" (2XAHc33)   3/4" x 1/2" (2XAHc32)   3/4" x 5/8" (2XAHc36)   1" (2XAHc44)  
1" x 3/4" (2XAHc43)   1 1/4" (2XAHc55)  

Elbow Male Thread
3/8" PEX x 3/8" MPT (2XAJc11)   3/8" PEX x 1/2" MPT (2XAJc12)   1/2" PEX x 3/8" MPT (2XAJc21)   1/2" PEX x 1/2" MPT (2XAJc22)  
1/2" PEX x 3/4" MPT (2XAJc23)   3/4" PEX x 3/4" MPT (2XAJc33)   1/2" MPT x 3/8" MPT (2XAJc21)   1/2" MPT x 1/2" MPT (2XAJc22)  
1" Barb x 1 1/4" MPT (2XATc10)   1 1/4" Barb x 1 1/4" MPT (2XATc20)  

Equal Coupling
3/8" (2XAAc11)   1/2" (2XAAc22)   5/8" (2XAAc00)   5/8" (2XAQc47)  
3/4" (2XAAc33)   1" (2XAAc44)  

Equal Tee
3//8" (2XAQc99)   1/2" (2XAQc97)   3/4" (2XAQc92)   1" (2XAQc85)  
1 1/4" (2XAQc49)  

Female Adapter
3/8" PEX x 1/2" FPT (2XACc12)   1/2" PEX x 1/8" FPT (2XACc26)   1/2" PEX x 1/2" FPT (2XACc22)   1/2" PEX x 3/4" FPT (2XACc23)  
3/4" PEX x 1/2" FPT (2XACc32)   3/4" PEX x 3/4" FPT (2XACc33)   1" PEX x 1" MPT (2XACc44)   1 1/4" Barb x 1 1/4" FPT (2XACc10)  
1 1/2" Barb x 1 1/2" FPT (2XACc35)  

Female Sweat
1/2" PEX x 1/2" (2XAEc22)   1/2" PEX x 3/4" (2XAEc23)   3/4" PEX x 3/4" (2XAEc33)   5/8" PEX x 3/4" (2XAEc54)  
1" PEX x 1" (2XAEc44)   1 1/4" PEX x 1 1/4" (2XAEc55)   1 1/2 PEX x 1 1/2 (2XAEc12)  

Female Sweat Elbow
5/8" PEX x 3/4" (2XALc53)   1/2" PEX x 3/4" (2XALc23)   3/4" PEX x 3/4" (2XALc33)  

In PEX Brass Elbow
3/4" Male Sweat x 3/4" (2XAKc33)  

In PEX Brass Tee
3/8" x 3/8" x 3/8" (2XAQc50)   1/2" x 3/8" x 1/2" (2XAQc51)   1/2" x 1/2" x 3/8" (2XAQc52)   1/2" PEX x 1/2" PB x 1/2" PB (2XAUc26)  
3/4" x 3/4" x 3/8" (2XAQc53)   3/4" PEX x 3/4" PB x 3/4" PB (2XAUc37)  

Male Adapter
3/8" PEX x 3/8" MPT (2XABc11)   3/8" PEX x 1/2" MPT (2XABc12)   1/2" PEX x 3/8" MPT (2XABc21)   1/2" PEX x 1/2" MPT (2XABc22)  
1/2" PEX x 3/4" MPT (2XABc23)   5/8" PEX x 3/4" MNPT (2XABc24)   3/4" PEX x 1/2" MPT (2XABc32)   3/4" PEX x 3/4" MPT (2XABc33)  
1" PEX x 3/4" MPT (2XABc43)   1" PEX x 1" MPT (2XABc44)   1 1/4" Barb x 1" MPT (2XABc54)   1 1/4" Barb x 1 1/4" MPT (2XABc55)  

Male Branch Tee
1/2" PEX x 1/2" PEX x 1/2" MPT (2XARc22)   3/4" PEX x 3/4" PEX x 1/2" MPT (2XARc32)  

Male Sweat
1/2" PEX x 1/2" (2XADc22)   1/2" PEX x 3/4" (2XADc23   5/8" PEX x 3/4" (2XADc54)   3/4" PEX x 1/2" (2XADc32)  
3/4" PEX x 3/4" (2XADc33)   1" PEX x 1" (2XADc44   1 1/4" Barb x 1 1/4" (2XADc55)   1 1/2" PEX x 1 1/2" (2XADc12)  
2" PEX BARB x 2" (2XADc14)  

Male Sweat Elbow
1/2" PEX x 3/4" (2XAKc23)   5/8" PEX x 3/4" (2XAKc23)   5/8" PEX x 3/4" (2XAKc53)  

Male Sweat PEX Brass Adapter
3/8" IN x 1/2" (2XADc11)   3/4" PEX x 1/2" (2XADc32)  

Non-Swivel Adapter
1/2" PEX x 1/2" FPT (2XAGc22)   1/2" PEX x 3/4" FPT (2XAGc23)   3/4" PEX x 3/4" FPT (2XAGc33)   1" PEX x 1" FPT (2XAGc44)  

PEX Barb Adapter
2" BARB X 2" MPT (2XABc14)  

PEX Barb Coupling
1 1/4" x 1" (2XAAc08)   1 1/4" x 1 1/4" (2XAAc09)   1 1/4" x 3/4" (2XAAc10)   1 1/2" (2XAAc15)  
1 1/2" x 3/4" (2XAAc12)   1 1/2" x 1" (2XAAc13)   1 1/2" x 1 1/4" (2XAAc14)   2" (2XAAc16)  
2" x 1" (2XAAc17)   2" x 1 1/4" (2XAAc18)   2" x 1 1/2" (2XAAc19)  

PEX Barb Elbow
2" (2XAHc34)  

PEX Barb Plug
2" (2XASc14)   2" X 2" X 1 1/2" (2XAQc81)   2" X 2" X 2" (2XAQc82)   2" x 1 1/2" x 1 1/2" (2XAQc76)  
2" x 1 1/2" x 1 1/4" (2XAQc75)   Plug 1-1/2"(2XASc12)   2" x 1 1/2" x 3/4" (2XAQc73)   2" x 1 1/4" x 1 1/4" (2XAQc72)  
2" x 2" x 1 1/4" (2XAQc80)   2" x 2" x 1" (2XAQc79)   2" x 2" x 3/4" (2XAQc78)   2" x 1 1/2" x 1" (2XAQc74)  

PEX Barb Tee
1 1/4" x 1" x 3/4" (2XAQc60)   1 1/2" (2XAQc71)   1 1/2" x 3/4" x 3/4" (2XAQc61)   1 1/2" x 1" x 1" (2XAQc63)  
1 1/2" x 1 1/4" x 3/4" (2XAQc64)   1 1/2" x 1 1/4" x 1" (2XAQc65)   1 1/2" x 1 1/4" x 1 1/4" (2XAQc66)   1 1/2" x 1 1/2" x 3/4" (2XAQc68)  
1 1/2" x 1 1/2" x 1" (2XAQc69)   1 1/2" x 1 1/2" x 1 1/4" (2XAQc70)  

PEX Brass Male Adatper
3/4" x 1" MPT (2XABc34)  

PEX Elbow
1 1/2" (2XAHc35)  

PEX Male Adapter
1 1/2" BARB X 1 1/2" MPT (2XABc35)  

PEX Seperator
1 1/4" PEX Seperator (2XA3c55)  

PEX TO Polybutylene
5/8" OD x 3/4" MALE SWEAT adaptor (2XAXc34)  

PEX Tee
1" x 3/4" x 1/2" (2XAQc89)   1" x 1/2" x 3/4" (2XAQc54)   1" x 1/2" x 1" (2XAQc55)   1 1/4" x 3/4" x 3/4" (2XAQc48)  
1 1/4" x 1 1/4" x 1" (2XAQc59)  

Reducing Coupling
3/8" x 1/2" (2XAAc21)   1/2" x 3/4" (2XAAc32)   3/4" x 5/8" (2XAAc34)   3/4" x 1" (2XAAc43)  

Reducing Tee
1/2" x 3/8" x 3/8" (2XAQc98)   1/2" x 1/2" x 3/4" (2XAQc96)   3/4" x 3/4" x 1" (2XAQc91)   1" x 3/4" x 1" (2XAQc88)  
1" x 1" x 1/2" (2XAQc87)   3/4" x 1/2" x 1/2" (2XAQc95)   3/4" x 1/2" x 3/4" (2XAQc94)   3/4" x 3/4" x 1/2" (2XAQc93)  
1" x 3/4" x 3/4" (2XAQc90)   1" x 1" x 3/4" (2XAQc86)  

Swivel
3/8" PEX x 3/8" FPT (2XAPc11)   3/8" PEX x 3/8" Flare (5/8" - 18") (2XAOc11)   3/8" PEX x 1/2" (2XAPc12)   1/2" PEX x 1/2" Flare (3/4" - 16") (2XAOc22)  
1/2" PEX x 3/4" FPT (2XAPc09)   1/2" PEX x 7/8" BC (2XAPc27)   3/4" PEX x 3/4" FPT (2XAPc10)   1" PEX x 1" FPT (2XAFc55)  

Swivel Adapter
3/4" PEX x Swivel Adapter (2XAVc33)  

Swivel Cone Connection
3/8" PEX x 1/2" FPT (2XAFc20)   3/8" PEX x 1/2" FPT (2XAPc08)   1/2" PEX x 1/2" FPT (2XAPf22)   1/2" PEX x 3/4" FPT (2XAPf23)  
1/2" PEX x 1" FPT (2XAFc24)   3/4" PEX x 3/4" FPT (2XAPc33)   3/4" PEX x 3/4" FPT (2XAPf33)   3/4" PEX x 1"FPT (2XAFc34)  

Swivel Hub
QICKPORT DOUBLE SWIVEL HUB (2XA2c11)  

Swivel w/ Brass Nut
1/2" PEX x 1/2" FPT (2XAFe22)   1/2" PEX x 3/4" FPT (2XAFc23)   3/4" PEX x 3/4" FPT (2XAFc33)  

Swivel w/ Plastic Nut
3/8" PEX x 3/8" FPT (2XAFc11)   3/8" PEX x 1/2" FPT (2XAFc12)   1/2" PEX x 1/2" FPT (2XAFd22)  

Swivel, EPDM Washer
1/2" PEX x 1/2" FPT (2XAPc27)   1/2" PEX x 1/2" FPT (2XAPe22)  

Swivel/Closet Connkit
3/8" PEX BC (2XAPc17)  

Tee
1 1/4" x 1" x 1" (2XAQc56)   1 1/4" x 1 1/4" x 1/2" (2XAQc57)   1 1/4" x 1 1/4" x 3/4" (2XAQc58)   1 1/4" x 1 1/4" x 1" (2XAQc59)  

Test Plug
3/8" (2XASc01)   1/2" (2XASc02)   5/8" (2XASc05)   3/4" (2XASc03)  
1" (2XASc04)   1" Plug (2XAVc44)   1 1/4" (2XASc10)  

@ Product also complies to NSF/ANSI 372.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
JINHONG COPPER INDUSTRIES (VIETNAM) COMPANY LIMITED 
Lo 58A, 59A, KCN Long Giang, Xa Tan Lap
1, Huyen Tan Phuoc, Tinh Tien Giang  
Vietnam 
070489166

Facility : Tinh Tien Giang, Vietnam

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings§ +++ [G]
 
Brass
 
WDK
 
ASTM F877
T8369W001G 1/2" x 1/2" PEX Elbow   T9317W100G 1/2"T PEX Coupling   T9317W100LF 1/2" Barb Coupling   T9317W105G 1/2" x 1/2" PEX Adapter  
T9317W140G 3/4"T PEX Coupling   T9317W140LF 3/4" Barb x 3/4" Barb Coupling   T9317W145G 3/4" x 3/4" PEX Adapter   T9318W100LF 1/2" Barb Elbow  
T9318W140LF 3/4" Barb Elbow   T9319W101LF 1/2" Barb Tee   T9319W141LF 3/4" Barb x 3/4" Barb x 1/2" Barb Reducing Tee   T9319W142LF 3/4" Barb Tee  
T9320W104G 3/4" x 1/2" x 3/4" PEX Tee   T9341W100LF 1/2" Barb x 1/2" FIP Female Adapter   T9341W101G 1/2"T X 3/4"F PEX Adapter   T9341W140LF 3/4" Barb x3/4" FIP Female Adapter  
T9361W100LF 1/2" Barb x 1/2" MIP Male Adapter   T9361W101G 1/2"T X 3/4"M PEX Adapter   T9361W140G 3/4"T x 1/2"M PEX Adapter   T9361W141LF 3/4" Barb x 3/4" MIP Male Adapter  
T9377W102G 1/2" X 1/2"F PEX SWT Adapter   T9386W102G 1/2" X 1/2"M PEX SWT Adapter   T9397W100G 1/2" PEX Plug   T9397W140G 3/4" PEX Plug  
T9442W100LF 1/2" Barb x 1/2" FIP Drop Ear Elbow  

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
John L Schultz Ltd. 
1723 55é Avenue
Dorval, QC H9P 2W3 
Canada 
800-363-6240

Facility : Guangdong, China

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Crimp Fittings (PF5m)* § +++ [2]
 
MLTPL
 
aqua-dynamic
 
ASTM F877
3/8" - 2 1/2"

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[2] For trade names, the use of "m" in trade name indicates use of C69300 alloy.

Crimp Fittings (PF5-G)* § +++
 
MLTPL
 
aqua-dynamic
 
ASTM F877
3/8" - 2 1/2"

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

[4] This product represents the following configurations:
    Equal Straight Union, PF15c-S, 1/8" - 2 1/2"
    Equal Elbow, PF15c-L, 1/8" - 2 1/2"
    Equal Straight Union PF15c(II)-S, 1/8" - 2-1/2"
    Equal Elbow, PF15c(II)-L, 1/8" - 2-1/2"
[7] This is a PEX sleeve certified to ASTM F1960 & CSA B137.5.  This is a non wetted product.
[8] n - Number of ports. 
    n - 4 - 8 for Branch Tees and n - 3 - 8 for Flow-through Tees.
    

Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

Crimp Fittings (PF5)* §
 
Brass 377
 
aqua-dynamic
 
ASTM F877
3/8" - 2-1/2"

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Crimp Fittings (PF5)* §
 
DZR Brass
 
aqua-dynamic
 
ASTM F877
3/8" - 2 1/2"  

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Fittings§ [1] [2]
 
MLTPL
 
aqua-dynamic
 
ASTM F877

Stainless Steel Manifolds
FN16-1F-3/4*n  

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Main inlet/outlet size: 1"
    Sub inlet/outlet size: 3/4"
[2] n is the quantity of subway

Crimp Fittings (PF5)* §
 
Brass 377
 
aqua-dynamic
 
ASTM F877
3/8" - 2 1/2"

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Crimp Fittings (PF5)* §
 
DZR Brass
 
aqua-dynamic
 
ASTM F877
3/8" - 2 1/2"  

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Fittings§ [1] [2]
 
MLTPL
 
aqua-dynamic
 
ASTM F877

Stainless Steel Manifolds
FN16-1F-3/4*n  

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Main inlet/outlet size: 1"
    Sub inlet/outlet size: 3/4"
[2] n is the quantity of subway

Crimp Fittings (PF5m)* § [3]
 
MLTPL
 
aqua-dynamic
 
ASTM F877
3/8" - 2 1/2"

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[3] For trade names, the use of "m" in trade name indicates use of C69300 alloy.

Crimp Fittings (PF5-G)* §
 
MLTPL
 
aqua-dynamic
 
ASTM F877
3/8" - 2 1/2"

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.



 
Legend Valve & Fitting, Inc. 
300 North Opdyke Road
Auburn Hills, MI 48326 
United States 
800-752-2082 
248-630-7436
Visit this company's website

Facility : # 1 Canada

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings¢ § +++ [G]
 
MLTPL
 
LEGEND
 
ASTM F877
1/2" PEX x 1/2" MPT Elbow   1/2" PEX End Plug   1/2" PEX x 1" MPT Adaptor   1/2" PEX x 1" MPT Elbow  
1/2" PEX x 1/2" MPT Adaptor   1/2" PEX x 1/2" Swivel Adaptor Rib Nut   1/2" PEX x 1/2" Swivel Adaptor Wing Nut   1/2" PEX x 1/2" Swivel Elbow Rib Nut  
1/2" PEX x 1/2" Swivel Elbow Wing Nut   1/2" PEX x 3/4" MPT Adaptor   1/2" PEX x 3/4" MPT Elbow   1/2" x 1" Coupling  
1/2" x 1/2" Coupling   1/2" x 1/2" Elbow   1/2" x 1/2" x 1/2" Tee   1/2" x 1/2" x 3/4" Tee  
1/2" x 3/4" Coupling   1/2" x 3/4" Elbow   1/2" x 3/4" x 3/4" Tee   3/4" PEX x 3/4" MPT Adaptor  
3/4" PEX End Plug   3/4" PEX x 1" MPT Adaptor   3/4" PEX x 1" MPT Elbow   3/4" PEX x 1/2" MPT Adaptor  
3/4" PEX x 1/2" MPT Elbow   3/4" PEX x 3/4" MPT Elbow   3/4" PEX x 3/4" Swivel Adaptor Rib Nut   3/4" PEX x 3/4" Swivel Adaptor Wing Nut  
3/4" PEX x 3/4" Swivel Elbow Rib Nut   3/4" PEX x 3/4" Swivel Elbow Wing Nut   3/4" x 1" Coupling   3/4" x 1" Elbow  
3/4" x 1/2" x 1/2" Tee   3/4" x 3/4" Coupling   3/4" x 3/4" Elbow   3/4" x 3/4" x 1" Tee  
3/4" x 3/4" x 1/2" Tee   3/4" x 3/4" x 3/4" Tee   1" PEX End Plug   1" PEX x 1" MPT Adaptor  
1" PEX x 1" MPT Elbow   1" PEX x 3/4" MPT Adaptor   1" PEX x 3/4" MPT Elbow   1" x 1" Coupling  
1" x 1" Elbow   1" x 1" x 1" Tee   1" x 1" x 1/2" Tee   1" x 1" x 3/4" Tee  
1" x 3/4" x 1" Tee   1" x 3/4" x 3/4" Tee   3/4" x 3/4" MIP Adapter   1" x 1" MIP Adapter  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
NIBCO INC. 
World Headquarters
1516 Middlebury Street 
Elkhart, IN 46516-4740 
United States 
574-295-3000
Visit this company's website

Facility : Stuarts Draft, VA

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings! # § ¿ +++ [G]
 
MLTPL
 
NIBCO
 
ASTM F877

PC604P Pex x Press Adapter
1" x 1"   1/2" x 1/2"   1/2" x 3/4"   3/4" x 1/2"  
3/4" x 3/4"  

! Product is exempt from bearing the PS 117 performance standard.
# Figure numbers may have one of the following optional prefixes used to identify retail
  packaging requirements: UCP, U, UTP, USP, UPP, UP, UMP, UHP, UBP, PP, MPP, CP, MCP, C,
  CS, MCC, CL or CLC.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
¿ All Listed Products from this facility are NSF Certified, whether or not they bear the
  NSF Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
NIBCO INC. 
World Headquarters
1516 Middlebury Street 
Elkhart, IN 46516-4740 
United States 
574-295-3000
Visit this company's website

Facility : # 2 China

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings# § +++ [G]
 
PPSU
 
NIBCO
 
ASTM F877

Poly Adapter
1/2" PEX x 1/2" MPT (NPD22)   1/2" PEX x 3/4" MPT (NPD22)   3/4" PEX x 1/2" MPT (NPD22)   3/4" PEX x 3/4" MPT (NPD22)  
1" PEX x 1" MPT (NPD22)  

Poly Adapter Elbow
1/2" PEX x 3/8" MPT (NPD25BE)   1/2" PEX x 1/2" MPT (NPD25BE)   3/4" PEX x 1/2" MPT (NPD25BE)   3/4" PEX x 3/4" MPT (NPD25BE)  

Poly Insert Coupling
3/8" (NPD01)   3/4" x 1/2" (NPD01R)   1/2" (NPD01)   1/2" x 3/8" (NPD01R)  
3/4" (NPD01)   1" x 3/4" (NPD01R)   1" (NPD01)  

Poly Insert Elbow
3/4" x 1/2" (NPD07R)   1/2" (NPD07)   3/4" (NPD07)   1" (NPD07)  

Poly Insert Plug
3/8" (NP18P)   3/4" (NP18P)   1/2" (NP18P)   1" (NP18P)  

Poly Insert Tee
3/8" (NPD11)   1/2" (NPD11)   1/2" x 1/2" x 3/4" (NPD11R)   3/4" (NPD11)  
3/4" x 1/2" x 1/2" (NPD11R)   3/4" x 1/2" x 3/4" (NPD11R)   3/4" x 3/4" x 1/2" (NPD11R)   3/4" x 3/4" x1" (NPD11R)  
1" (NPD11)   1" x 3/4" x 3/4" (NPD11R)   1" x 3/4" x 1" (NPD11R)   1" x 1" x 1/2" (NPD11R)  
1" x 1" x 3/4" (NPD11R)  

Poly Swivel Adapter
3/8" PEX x 1/2" FPT (NPD26)   1/2" PEX x 1/2" FPT (NPD26)   3/4" PEX x 3/4" FPT (NPD26)  

Poly Swivel Elbow
1/2" PEX x 1/2" FPT (NPD26E)   3/4" PEX x 3/4" FPT (NPD26E)  

# Figure numbers may have one of the following optional prefixes used to identify retail
  packaging requirements: UCP, U, UTP, USP, UPP, UP, UMP, UHP, UBP, PP, MPP, CP, MCP, C,
  CS, MCC, CL or CLC.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings§ +++ [G]
 
PPSU
 
NIBCO
 
ASTM F877

Faucet Adapter Elbow
Poly Swivel Elbow (Faucet), 3/4 x 1/2, (NPD26E)  

Multiport Tees - Closed
Multiport Tee, 3/4" Inlet, Closed, 3/4 x 1/2 (2), (NPDCMT102)   Multiport Tee, 3/4" Inlet, Closed, 3/4 x 1/2 (3), (NPDCMT103)  

Multiport Tees - Open
Multiport Tee, 3/4" Inlet & Outlet, Open, 3/4 x 3/4 x 1/2 (2), (NPDOMT102)  

NPSM Plastic Swivel Elbow
Poly Swivel Elbow (Faucet), 1/2 x 3/4, (NPD26E)  

Plastic Swivel Adapter
Poly Swivel Adapter (Faucet), 1/2 x 3/4, (NPD26)  

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Manifolds§ +++ [G]
 
PPSU
 
NIBCO
 
ASTM F877

Multiport Tees - Closed
Multiport Tee, 3/4" Inlet, Closed, 3/4 x 1/2 (4), (NPDCMT104)   Multiport Tee, 1" Inlet, Closed, 1 x 1/2 (6), (NPDCMT106)  

Multiport Tees - Open
Multiport Tee, 3/4" Inlet & Outlet, Open, 3/4 x 3/4 x 1/2 (3), (NPDOMT103)   Multiport Tee, 3/4" Inlet & Outlet, Open, 3/4 x 3/4 x 1/2 (4), (NPDOMT104)   Multiport Tee, 3/4" Inlet & Outlet, Open, 3/4 x 3/4 x 1/2 (6), (NPDOMT106)  

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
NIBCO INC. 
World Headquarters
1516 Middlebury Street 
Elkhart, IN 46516-4740 
United States 
574-295-3000
Visit this company's website

Facility : D China

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings# @ ¢ § +++ [G]
 
MLTPL
 
NIBCO
 
ASTM F877

Ballcock Swivel
NP44-LF 1/2" PEX x 7/8"  

Barb
NP29R 1/2" O.D. PEX x 1/2" O.D. PEX   NP29R 3/4" O.D. PEX x 3/4" O.D. PEX  

Barb Coupling
NP01-LF 1 1/4" x 1 1/4"   NP01R-LF 1 1/4" x 1"   NP01R-LF 1 1/4" x 3/4"  

Brass 90 Degree Elbow
NP07 1 1/4" Brass Elbow (PX80670D)   NP07 1" Brass Elbow (PX80660D)   NP07 1/2" Brass Elbow (PX80630D)   NP07 3/4" Brass Elbow (PX80650D)  
NP07 3/8" Brass Elbow (PX80620D)   NP07R 3/4" x 1/2" Brass Elbow (PX80640D)  

Brass Coupling
1 1/4" BRASS COUPLING W/ STOP / 1 1/4" PEX Separator(PX80610X)   1" BRASS COUPLING W/ STOP / 1" PEX Separator (PX80605X)   NP01 1 1/4" Brass Coupling (PX80580D)   NP01 1" Brass Coupling (PX80570D)  
NP01 1/2" Brass Coupling (PX80520D)   NP01 3/4" Brass Coupling (PX80550D)   NP01 3/8" Brass Coupling (PX80500D)   NP01 5/8" Brass Coupling (PX80530D)  
NP01R 1 1/4" x 1" Brass Coupling (PX80600D)   NP01R 1 1/4" x 3/4" Brass Coupling (PX80590D)   NP01R 1" x 3/4" Brass Coupling (PX80560D)   NP01R 1/2" x 3/8" Brass Coupling (PX80510D)  
NP01R 3/4" x 1/2" Brass Coupling (PX80540D)   NP29 1/2" PEX x 1/2" PB Transition Fitting (PX81530D)   NP29 3/4" PEX x 3/4" PB Transition Fitting (PX81540D)  

Brass Drop-Ear Elbow
NP28 1/2" PEX x 1/2" FIP Drop Ear Elbow (PX81400D)   NP28 3/4" PEX x 1/2" FIP Drop Ear Elbow (PX81410D)   NP28 3/4" PEX x 3/4" FIP Drop Ear Elbow (PX81420D)  

Brass Drop-Ear Elbow
NP28-LF 3/4" X 1/2" FPT PEX  

Brass Elbow Female Thread
3/4" PEX x 1/2" FIP (PX81710X)   3/4" PEX x 3/4" FIP (PX81720X)  

Brass Elbow Male Thread
3/4" Barb x 1/2" MPT (PX81502X)   NP25BE 1/2" PEX x 1/2" MIP Elbow (PX81500D)   NP25BE 1/2" PEX x 3/4" MIP Elbow (PX81505D)   NP25BE 1/2" PEX x 3/8" MIP Elbow (PX81490D)  
NP25BE 3/4" PEX x 3/4" MIP Elbow (PX81510D)  

Brass Female Adapter
1 1/4" Barb x 1" FPT (PX81313X)   NP26B 1 1/4" PEX x 1 1/4" FIP Adapter (PX81315D))   NP26B 1" PEX x 1" FIP Non-Swivel Adapter (PX81310D)   NP26B 1/2" PEX x 1/2" FIP Non-SVL Adapter (PX81270D)  
NP26B 1/2" PEX x 3/4" FIP Non-SVL Adapter (PX81280D)   NP26B 3/4" PEX x 1/2" FPT Adapter (PX81285D)   NP26B 3/4" PEX x 3/4" FIP Adapter (PX81300D)  

Brass Male Adapter
NP25B 1 1/4" PEX x 1 1/4" MIP Adapter (PX81265D)   NP25B 1" PEX x 1" MIP Adapter (PX81260D)   NP25B 1" PEX x 3/4" MIP Adapter (PX81240D)   NP25B 1/2" PEX x 1/2" MIP Adapter (PX81190D)  
NP25B 1/2" PEX x 3/4" MIP Adapter (PX81200D)   NP25B 3/4" PEX x 1" MIP Adapter (PX81250D)   NP25B 3/4" PEX x 1/2" MIP Adapter (PX81210D)   NP25B 3/4" PEX x 3/4" MIP Adapter (PX81220D)  
NP25B 3/8" PEX x 1/2" MIP Adapter (PX81180D)  

Brass Sweat Adapter
NP23 1" PEX x 1" Male Sweat Adapter (PX81100D)   NP23 1/2" PEX x 1/2" Male Sweat Adapter (PX81070D)   NP23 1/2" PEX x 3/4" Male Sweat Adapter (PX01646D)   NP23 3/4" PEX x 1/2" Male Sweat Adapter (PX01751D)  
NP23 3/4" PEX x 3/4" Male Sweat Adapter (PX81090D)   NP23F 1" PEX x 1" Female Sweat Adapter (PX81140D)   NP23F 1/2" PEX x 1/2" Female Sweat Adapter (PX81120D)   NP23F 1/2" PEX x 3/4" Female Sweat Adapter (PX01676D)  
NP23F 3/4" PEX x 3/4" Female Sweat Adapter (PX81130D)  

Brass Sweat Female Elbow
1/2" PEX x 1/2" FEMALE SWEAT ELBOW (PX81020X)   NP22F 3/4" PEX x 3/4" Female SWT Elbow (PX81030D)   NP22F 5/8" PEX x 3/4" Female Sweat Elbow (PX81050D)  

Brass Sweat Male Elbow
NP22 5/8" PEX x 3/4" Male Sweat Elbow (PX81040D)  

Brass Swivel Adapter
1/2" PEX x 7/8" Ballcock Swivel (PX81380D)   NP26BS 1/2" PEX x 1/2" NPSM SVL ADPT - Brass Nut (PX02346D)   NP26BS 1/2" PEX x 3/4" NPSM Swivel Adapter (PX81340D)   NP26BS 3/4" PEX x 3/4" NPSM SVL ADPT (PX81360D)  
NP26PS 1/2" NPSM SWL Adapt Plastic Nut (PX02345D)   NP27 3/8" PEX x 1/2" STR SWVL Faucet Adapt (PX81330D)   NP44 3/8" PEX x Straight SVL Closet Adapt (PX81370D)  

Brass Swivel Elbow w/ Brass Nut
1/2" PEX x 3/4" FGHT Swivel Cone connection (PX81800X)   NP26SE 1/2" PEX x 3/4" FIP Swivel Elbow (PX81290D)   NP26SE 3/4" PEX x 3/4" FIP Swivel Elbow (PX81320D)   NP27B 1/2" PEX x 1/2" NPSM SVL EL - Brass Nut (PX02255D)  

Brass Swivel Elbow w/ Plastic Nut
NP27P 1/2" x 1/2" NPSM SVL EL (Plastic Nut) (PX02245D)   NP27SE 3/8" PEX x 1/2" ELB SVL Faucet ADPT (PX81350D)  

Brass Tee
NP11 1 1/4" Brass Tee (PX80860D)   NP11 1" PEX Brass Insert Tee (PX80820D)   NP11 1/2" Brass Tee (PX80710D)   NP11 1/2" x 1/2" x 3/8" Brass Tee (PX80700D)  
NP11 3/4" PEX Brass Insert Tee (PX80760D)   NP11 3/8" Brass Tee (PX80680D)   NP11 3/8" x 3/8" x 1/2" Brass Tee (PX80690D)   NP11R 1 1/4" x 1 1/4" x 1" Brass Tee (PX80870D)  
NP11R 1 1/4" x 1" x 1" Brass Tee (PX80880D)   NP11R 1" x 1" x 1/2" Brass Tee (PX80800D)   NP11R 1" x 1" x 3/4" Brass Tee (PX80810D)   NP11R 1" x 1/2" x 1" Brass Tee (PX80840D)  
NP11R 1" x 1/2" x 3/4" Brass Tee (PX80830D)   NP11R 1" x 3/4" x 1" Brass Tee (PX80790D)   NP11R 1" x 3/4" x 1/2" Brass Tee (PX80850D)   NP11R 1" x 3/4" x 3/4" PEX Brass Tee (PX80780D)  
NP11R 1/2" x 1/2" x 3/4" Brass Tee (PX80720D)   NP11R 3/4" x 1/2" x 1/2" Brass Tee (PX80730D)   NP11R 3/4" x 1/2" x 3/4" Brass Tee (PX80740D)   NP11R 3/4" x 3/4" x 1" Brass Tee (PX80770D)  
NP11R 3/4" x 3/4" x 1/2" Brass Tee (PX80750D)  

Brass Test Plug
NP18 1 1/4" Brass Plug (PX81470D)   NP18 1" Brass Plug (PX81480D)   NP18 1/2" Brass Plug (PX81450D)   NP18 3/4" Brass Plug (PX81460D)  
NP18 3/8" Brass Plug (PX81440D)  

Coupling
NP29-LF 1/2" PEX x 1/2" PB Coupling   NP29-LF 3/4" PEX x 3/4" PB Coupling   NP29-LF 3/8" PEX x 3/8" PB Coupling  

Drop-Ear Elbow
NP28-LF 1/2" PEX x 1/2" FPT   NP28-LF 3/4" PEX x 3/4"  

Elbow
NP07-LF 1 1/4"   NP07-LF 1"   NP07-LF 1/2"   NP07-LF 3/4"  
NP07-LF 3/8"   NP07R-LF 1" x 3/4"   NP07R-LF 3/4" x 1/2"   NP07R-LF 3/8" x 1/2"  

Elbow Male Thread
NP25BE-LF 1" Barb x 1 1/4" MPT   NP25BE-LF 1/2" PEX x 1/2" MPT   NP25BE-LF 1/2" PEX x 3/4" MPT   NP25BE-LF 1/2" PEX x 3/8" MPT  
NP25BE-LF 3/4" PEX x 3/4" MPT   NP25BE-LF 3/8" PEX x 1/2" MPT   NP25BE-LF 3/8" PEX x 3/8" MPT  

Equal Coupling
NP01-LF 1"   NP01-LF 1/2"   NP01-LF 3/4"   NP01-LF 3/8"  
NP01-LF 5/8"  

Equal Tee
NP11-LF 1 1/4"   NP11-LF 1"   NP11-LF 1/2"   NP11-LF 3/4"  
NP11-LF 3/8"  

Female Adapter
1 1/4" Barb x 1 1/4" FPT (PX81315X)   NP26B-LF 1 1/4" Barb x 1 1/4" FPT   NP26B-LF 1" PEX x 1" FPT   NP26B-LF 1/2" PEX x 1/2" FPT  
NP26B-LF 1/2" PEX x 1/8" FPT   NP26B-LF 1/2" PEX x 3/4" FPT   NP26B-LF 3/4" PEX x 1/2" FPT   NP26B-LF 3/4" PEX x 3/4" FPT  
NP26B-LF 3/8" PEX x 1/2" FPT  

Female Sweat
NP23F-LF 1 1/4" PEX x 1 1/4"   NP23F-LF 1" PEX x 1"   NP23F-LF 1/2" PEX x 1/2"   NP23F-LF 1/2" PEX x 3/4"  
NP23F-LF 3/4" PEX x 3/4"   NP23F-LF 5/8" PEX x 3/4"  

Female Sweat Elbow
NP22F-LF 1/2" PEX x 3/4"   NP22F-LF 3/4" PEX x 3/4"   NP22F-LF 5/8" PEX x 3/4"  

In PEX Brass Tee
NP11R-LF 1/2" x 1/2" x 3/8"   NP11R-LF 1/2" x 3/8" x 1/2"   NP11R-LF 3/4" x 3/4" x 3/8"   NP11R-LF 3/8" x 3/8" x 3/8"  

Male Adapter
NP25B-LF 1 1/4" Barb X 1 1/4" MPT (2XABc55)   NP25B-LF 1 1/4" Barb X 1" MPT (2XABc54)   NP25B-LF 1" PEX x 1" MPT (2XABc44)   NP25B-LF 1" PEX x 3/4" MPT (2XABc43)  
NP25B-LF 1/2" PEX x 1/2" MPT   NP25B-LF 1/2" PEX x 3/4" MPT   NP25B-LF 1/2" PEX x 3/8" MPT   NP25B-LF 3/4" PEX x 1/2" MPT (2XABc32)  
NP25B-LF 3/4" PEX x 3/4" MPT (2XABc33)   NP25B-LF 3/8" PEX x 1/2" MPT   NP25B-LF 3/8" PEX x 3/8" MPT  

Male Sweat
NP23-LF 1 1/4" Barb x 1 1/4"   NP23-LF 1" PEX x 1"   NP23-LF 1/2" PEX x 1/2"   NP23-LF 1/2" PEX x 3/4"  
NP23-LF 3/4" PEX x 1/2"   NP23-LF 3/4" PEX x 3/4"   NP23-LF 5/8" PEX x 3/4"  

Male Sweat Elbow
NP22-LF 1/2" PEX x 3/4"   NP22-LF 5/8" PEX x 3/4"  

Male Sweat PEX Brass Adapter
NP23-LF 3/8" IN x 1/2"  

PEX Brass Elbow
NP22-LF 3/4" Male SWT x 3/4" IN  

PEX Brass Male Adapter
NP25B-LF 3/4" x 1" MPT  

PEX TO Polybutylene
5/8" OD x 3/4" MALE SWEAT adaptor (PX81600X)  

PEX Tee
NP11R 1 1/4" x 1 1/4" x 1" DZR BRASS TEE (PX80870X)   NP11R-LF 1 1/4" x 1 1/4" x 1"   NP11R-LF 1 1/4" x 1 1/4" x 1/2"   NP11R-LF 1 1/4" x 1 1/4" x 3/4"  
NP11R-LF 1 1/4" x 1" x 1"   NP11R-LF 1" x 1/2" x 1"   NP11R-LF 1" x 1/2" x 3/4"   NP11R-LF 1" x 3/4" x 1/2"  

Reducing Coupling
NP01R-LF 1/2" x 3/4" Reducing Coupling   NP01R-LF 3/4" x 1" Reducing Coupling   NP01R-LF 3/8" x 1/2" Reducing Coupling  

Reducing Tee
NP11R-LF 1" x 1" x 1/2"   NP11R-LF 1" x 1" x 3/4"   NP11R-LF 1" x 3/4" x 1"   NP11R-LF 1" x 3/4" x 3/4"  
NP11R-LF 1/2" x 1/2" x 3/4"   NP11R-LF 1/2" x 3/8" x 3/8"   NP11R-LF 3/4" x 1/2" x 1/2"   NP11R-LF 3/4" x 1/2" x 3/4"  
NP11R-LF 3/4" x 3/4" x 1"   NP11R-LF 3/4" x 3/4" x 1/2"  

Swivel
NP26BS-LF 1" PEX x 1" FPT   NP26BS-LF 1/2" PEX x 3/4" FPT   NP26BS-LF 3/4" PEX x 3/4" FPT   NP26BS-LF 3/8" PEX x 1/2"  
NP26BS-LF 3/8" PEX x 3/8" FPT  

Swivel Cone Connection
NP26SE 3/4" PEX x 3/4" FIP DZR SVL ELBOW (PX81320X)   NP27B-LF 1/2" PEX x 1/2" FPT   NP27B-LF 1/2" PEX x 3/4" FPT   NP27B-LF 3/4" PEX x 3/4" FPT  
NP27B-LF 3/8" PEX x 1/2" FPT   UPNP27P-LF 3/4" PEX x NPSM BRONZE SWIVEL ELBOW BAG OF 1 (PX02218XR1)  

Swivel w/ Brass Nut
NP26BS-LF 1/2" PEX x 1/2" FPT   NP26BS-LF 1/2" PEX x 3/4" FPT   NP26BS-LF 3/4" PEX x 3/4" FPT  

Swivel w/ Plastic Nut
NP26PS-LF 1/2" PEX x 1/2" FPT   NP26PS-LF 3/8" PEX x 1/2" FPT   NP26PS-LF 3/8" PEX x 3/8" FPT  

Swivel, EPDM Washer
NP26PS 1/2" PEX x NPSM SVL ADPT-PLASTICNUT (PX02345X)   NP27B 1/2" x 1/2" NPSM DZR SVL ELB BRASSNUT (PX02255X)   NP27P-LF 1/2" PEX x NPSM SVL EL-PLSTC NUT(PX02245X)  

Test Plug
NP18-LF 1 1/4"   NP18-LF 1"   NP18-LF 1/2"   NP18-LF 3/4"  
NP18-LF 3/8"  

# Figure numbers may have one of the following optional prefixes used to identify retail
  packaging requirements: UCP, U, UTP, USP, UPP, UP, UMP, UHP, UBP, PP, MPP, CP, MCP, C,
  CS, MCC, CL or CLC.
@ Product also complies to NSF/ANSI 372.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings@ ¢ § +++ [G]
 
MLTPL
 
NIBCO
 
ASTM F877

Brass Elbow Female Thread
NP26BE-LF 1/2" PEX x 1/2" FIP (2XAWc22)   NP26BE-LF 1/2" PEX x 3/4" FIP (2XAWc23)  

Brass Swivel Adapter
NP44-LF 1/2" PEX x 7/8" Ballcock Swivel (2XAFc27)  

@ Product also complies to NSF/ANSI 372.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Oetiker Inc. 
6317 Euclid Street
P.O. Box 217 
Marlette, MI 48543 
United States 
800-963-8453 
989-635-3621
Visit this company's website

Facility : Marlette, MI

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fitting Components* [1]
 
SS
 
Oetiker Stepless® PEX Clamp
 
ASTM F877
3/8" (16703334)   1/2" (16703335)   5/8" (16705571)   3/4" (16703336)  
1" (16704150)  

* Fittings may be marked with metric size designation.
[1] Product may also be marked with trade designation OET.

Fitting Components* [1]
 
SS
 
Oetiker Stepless® PEXGrip® Clamp
 
ASTM F877
3/8" (16708503)   1/2" (16707872)   5/8" (16708504)   3/4" (16707955)  
1" (16708152)  

* Fittings may be marked with metric size designation.
[1] Product may also be marked with trade designation OET.



 
PEX GUY 
14710 Yorba Court
Chino, CA 91710 
United States 
877-235-6352 
909-606-0988

Facility : # 1 China

Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

Fittings§ [2] [3]
 
MLTPL
 
PEX GUY
 
ASTM F877

Stainless Steel Manifolds
FN16-1F-3/4*n   FN16B-02   FN16B-03   FN16B-04  
FN16B-05   FN16B-06   FN16B-07   FN16B-08  
FN16B-09   FN16B-10   FN16B-11   FN16B-12  

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[2] Main inlet/outlet size: 1"	
    Sub inlet/outlet size: 3/4"	
    
    
[3] n is the quantity of subway



 
PEXhouse.com. Inc. 
68 Healey Road Unit 4 -5
Bolton, ON L7E 5A4 
Canada 
844-548-8739
Visit this company's website

Facility : # 1 China

Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

Fittings§ [3] [4]
 
MLTPL
 
VesiPEX
 
ASTM F877

Stainless Steel Manifolds
FN16-1F-3/4*n  

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[3] Main inlet/outlet size: 1"	
    Sub inlet/outlet size: 3/4"
[4] n is the quantity of subway.



 
REHAU Construction LLC 
1501 Edwards Ferry Road, N.E.
Leesburg, VA 20176 
United States 
800-247-9445 
703-777-5255
Visit this company's website

Facility : # 1 China

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings§ +++ [G]
 
Brass
 
REHAU
 
ASTM F877

EVERLOC+ 45 DEG Elbow
1 1/2" x 1 1/2" (425021)   2" x 2" (425022)  

EVERLOC+ Elbow
1/2" x 1/2" CU Press x 3/8" CU Female (337006)   1/2" x 1/2" FPT (317170)   1/2" x 1/2" MPT (317168)   5/8" x 5/8" (317163)  
3/4" x 1/2" FPT (422004)   3/4" x 3/4" CM (317166)   3/4" x 3/4" FPT (422006)   3/4" x 3/4" MPT (317169)  
3/4" x 3/4" MPT (425476)   1" x 1/2" FPT (422005)   1" x 1" FPT (422007)  

EVERLOC+ Sweat Adapter
1/2" x 1/2" Cu Female (317184)   3/4" x 3/4" Cu Female (317187)   1" x 1" Cu Female (317191)  

EVERLOC+ Tee
1/2" x 1/2" MPT (428824)   3/4" x 3/4" x 1/2" FPT (421744)   1" x 1" x 1/2" FPT (421878)   1 1/4" x 1 1/4" x 1/2" (424991)  
1 1/4" x 1 1/4" x 3/4" (322832)   1 1/4" x 1" x 3/4" (424989)   1 1/2" x 1 1/4" x 1 1/2" (317145)   1 1/2" x 1" x 3/4" (424992)  
1 1/2" x 1 1/4" x 3/4" (425025)   1 1/2" x 1 1/4" x 1" (317153)   1 1/2" x 1 1/2" x 1/2" (425024)   1 1/2" x 1 1/2" x 3/4" (322833)  
2" x 1 1/4" x 2" (317146)   2" x 1 1/2" x 1 1/4" (317161)   2" x 1 1/2" x 1 1/2" (317155)   2" x 1 1/2" x 3/4" (424994)  
2" x 1 1/2" x 1" (317156)   2" x 1 1/2" x 2" (317147)   2" x 2" x 1/2" (424995)   2" x 2" x 3/4" (322834)  

Everloc+ Stub Ell
1/2" 8" (418665)   1/2" 8" with mounting plate (424864)   3/4" 8" (418668)   3/4" 8" with mounting plate (329229)  
1" 8"  

Everloc+ Stub Out
1/2" 8" Straight (418669)  

Everloc+ Tub/Shower Diverter
1/2" (418664)  

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

Brass Manifold Outlet
 
MLTPL
 
RAUPEX x R-20
 
ASTM F877
3/8" (267507)
1/2" (261007)
5/8" (267557)
3/4" (267007)

Nickel Plated Manifold Outlet
 
MLTPL
 
RAUPEX x R-20
 
ASTM F877
3/8" (418315)
1/2" (418317)
5/8" (418318)
3/4" (F418319)


Facility : # 1 Germany

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings¢ § +++
 
PPSU
 
Rehau
 
ASTM F877

EVERLOC+P Coupling
1/2" x 1/2" (104824)   3/4" x 1/2" (104830)   3/4" x 3/4" (104825)   1" x 3/4" (104831)  
1" x 1" (104826)   1 1/4" x 1" (104832)   1 1/4" x 1 1/4" (104827)   1 1/2" x 1" (104833)  
1 1/2" x 1 1/2" (104828)   2" x 2" (104829)  

EVERLOC+P Elbow
1/2" x 1/2" (104859)   3/4" x 3/4" (104860)   1" x 1" (104861)   1 1/4" x 1 1/4" (104862)  
1 1/2" x 1 1/2" (104863)   2" x 2" (104864)  

EVERLOC+P Manifolds
Mfld CE 3/4” x (3)1/2"Out (104867)   Mfld CE 3/4” x (4)1/2"Out (104868)   Mfld FT (2)3/4In, (2)1/2Out (104869)   Mfld FT (2)3/4In, (3)1/2" Out (104870)  
Mfld FT (2)3/4In, (4)1/2Out (104871)   Mfld EFT (2)3/4In, (3)1/2" Out (104872)   Mfld EFT (2)3/4In, (4)1/2" Out (104873)   EVERLOC+P Mfld CE 3/4'' x (6)1/2''Out (108807)  
EVERLOC+P Mfld CE 1",x (4)1/2Out (108808)   EVERLOC+P Mfld CE 1" x , (6)1/2Out (108809)   EVERLOC+ P Mfld FT (2) 3/4”, (2) ½” Out, + (1) ½” Out (433900)   EVERLOC+ P Mfld FT (2) 3/4”, (2) ½” Out, + (2) ½” Out (433894)  
EVERLOC+ P Mfld FT (2) 3/4”, (3) ½” Out, + (3) ½” Out (433896)   EVERLOC+P Mfld CE (2)3/4" In,(6)1/2Out (108804)   EVERLOC+ P Mfld FT (2) 1”, (3) ½” Out (433897)   EVERLOC+ P Mfld FT (2) 1”, (4) ½” Out (433903)  
EVERLOC+P Mfld CE (2) 1" In,(6)1/2Out (108805)   EVERLOC+ P Mfld CE 3/4”, (2) ½” Out, + (1) ½” out (433898)   EVERLOC+ P Mfld CE 3/4”, (2) ½” Out, + (2) ½” out (433899)   EVERLOC+ P Mfld FT 1” x ¾”, (3) ½” Out (433904)  
EVERLOC+P Mfld CE 1" x 3/4" In x (4) 1/2" Out (108806)   EVERLOC+ P Mfld FT 1” x ¾”, (6) ½” Out (433906)  

EVERLOC+P Plug
1/2" (104856)   3/4" (104857)   1" (104858)  

EVERLOC+P Tee
1/2" x 1/2" x 1/2" (104835)   1/2" x 1/2" x 3/4" (104854)   3/4" x 1/2" x 1/2" (104851)   3/4" x 1/2" x 3/4" (104841)  
3/4" x 3/4" x 1/2" (104844)   3/4" x 3/4" x 3/4" (104836)   3/4" x 3/4" x 1" (104855)   1" x 3/4" x 3/4" (104852)  
1" x 3/4" x 1" (104842)   1" x 1" x 1/2" (104846)   1" x 1" x 3/4" (104845)   1" x 1" x 1" (104837)  
1 1/4" x 1" x 1" (104853)   1 1/4" x 1 1/4" x 1" (104847)   1 1/4" x 1 1/4" x 1 1/4" (104838)   1 1/2" x 1 1/2" x 1" (104848)  
1 1/2" x 1 1/2" x 1 1/2" (104839)   2" x 2" x 1" (104849)   2" x 2" x 2" (104840)  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).


Facility : # 1 Taiwan

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings¢ § +++ [G]
 
MLTPL
 
REHAU
 
ASTM F877

EVERLOC+ x CPVC Transition Fitting
1/2 x 1/2 Socket CPVC (455700)   1/2 x 1/2 Spigot CPVC (455701)   3/4 x 3/4 Socket CPVC (455702)   3/4 x 3/4 Spigot CPVC (455703)  
1 x 1 Spigot CPVC (455704)   1 x 1 Socket CPVC (455705)   1 1/4x1 1/4 SPIG CPVC (455706)   1 1/4x1 1/4 SOC CPVC (455707)  
1 1/2x1 1/2 SPIG CPVC (455708)   1 1/2x1 1/2 SOC CPVC (455709)   2 x 2 Spigot CPVC (455710)   2 x 2 Socket CPVC (455711)  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : # 4 USA

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings§ +++ [G]
 
Brass
 
REHAU
 
ASTM F877

EVERLOC+ LF Adapter
1/2" x 1/2" CF (317184)   1/2" x 1/2" FPT (317173)   1/2" x 3/4" CF (322835)   1/2" x 1/2" CM or 3/8" CF (317185)  
3/4" x 1/2" CF (325164)   3/4" x 1/2" CM (325165)   3/4" x 3/4" CM (317186)   3/4" x 3/4" CF (317187)  
1" x 3/4" MPT (323708)   1" x 1" CF (317191)   1-1/4" x 1-1/4" CM (317192)  

EVERLOC+ LF Coupling
1-1/4" x 3/4" (425026)   1-1/2" x 3/4" (425028)   1 1/2" x 1 1/4" (422233)   2" x 1/2" (425029)  
2" x 3/4" (425031)   2" x 1-1/4" (317140)   2" x 1-1/2" (317141)  

EVERLOC+ LF Elbows
1/2" x 1/2" CM or 3/8" CF (317164)   1/2" (317165)   1/2" x 1/2" FPT (317170)   3/4" (317167)  

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : # 5 USA

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings§ +++ [G]
 
MLTPL
 
REHAU
 
ASTM F877

EVERLOC+ LF Adapter
3/8" x 1/2"MPT (317174)   1/2" x 1/2" CP (337007)   1/2" x 1/2" FPT (317173)   1/2" x 1/2"MPT (317171)  
1/2" x 1/2"CF (317184)   5/8" x 1/2"MPT (317175)   5/8" x 3/4"MPT or 1/2"CF (317176)   3/4" x 1/2" CP (337008)  
3/4" x 3/4" CP (337010)   3/4" x 3/4"MPT (317172)   3/4" x 3/4"FPT (317182)   3/4" x 1"MPT (317177)  
3/4" x 1"CF (317189)   3/4" x 3/4" CF (317187)   1" x 3/4" FPT (329227)   1" x 1" CP (337011)  
1" x 1"MPT (317178)   1" x 1"FPT (317183)   1" x 1" CF (317191)   1" x 1"CM (317190)  
1-1/4" x 1-1/4"MPT (317179)   1-1/4" x 1-1/4"CF (317193)   1 1/4" x 1 1/4" CP (337012)   1-1/2" x 1-1/2"CM (317194)  
1 1/2" x 1 1/2" CP (337013)   1-1/2" x 1-1/2"MPT (317180)   2" x 2"MPT (317181)   1-1/2" x 2"CM or 1-1/2"CF (317195)  
2" x 2"CM (317196)   2" x 2" CP (337014)   2" x 2"CF (317197)  

EVERLOC+ LF Coupling
3/8" x 3/8" (317138)   5/8" x 5/8" (317142)   1/2" x 1/2" (318366)   3/4" x 5/8" (426294)  
3/4" x 3/4" (318369)   1" x 1/2" (426297)   1" x 1" (318370)   2" x 1" (317139)  

EVERLOC+ LF Manifold Outlet
1/2" (326710)   3/4" (326711)  

EVERLOC+ LF Plug
1/2" (318385)   5/8" (317157)   1-1/4" (317158)   1-1/2" (317159)  
2" (317160)  

EVERLOC+ Manifold Sweat Adapter
3/4" X 1" CF (326712)   1" X 1" CM (326713)  

EVERLOC+ Swivel
1/2" x 1/2" NPS (418463)   3/4" x 3/4" NPS (418464)  

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

Brass Manifold Outlet
 
MLTPL
 
RAUPEX x R-20
 
ASTM F877
3/8" (267507)
1/2" (261007)
5/8" (267557)
3/4" (267007)

Nickel Plated Manifold Outlet
 
MLTPL
 
RAUPEX x R-20
 
ASTM F877
3/8" (418315)
1/2" (418317)
5/8" (418318)
3/4" (F418319)

Everloc+ x R-20[1]
 
MLTPL
 
Rehau
 
ASTM F877
3/8" (431459-001)
1/2" (431461-001)
5/8" (431462-001)
3/4" (431463-001)

[1] Nickel Plated Manifold Outlet 


Facility : # 6 Canada

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

EVERLOC+ LF Manifold§ +++ [G]
 
MLTPL
 
REHAU
 
ASTM F877
EVERLOC+ LF Mfld CE 1", (10) 1/2"Out (108466)
EVERLOC+ LF Mfld CE 1", (8) 1/2"Out (108465)
Mfld CE (3) 1/2" Out (105136)
EVERLOC+ LF Mfld CE 1", (4) 1/2" Out (104892)
EVERLOC+ LF Mfld CE 3/4", (6) 1/2"Out (104893)
EVERLOC+ LF Mfld CE 1", (6) 1/2"Out (104894)
EVERLOC+ LF Mfld FT 1"x3/4", (4) 1/2"Out (104895)
EVERLOC+ LF Mfld FT 1" x 1", (4) 1/2"Out (104896)
EVERLOC+ LF Mfld FT ¾" x ¾", (6) 1/2"Out (104897)
EVERLOC+ LF Mfld FT 1" x ¾", (6) 1/2"Out (104898)
EVERLOC+ LF Mfld H, (3)3/4", (4) 1/2"Out (104899)
EVERLOC+ LF Mfld CTL, 1"Header, (24)½"Out (104902)

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : # 7 USA

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings¢ §
 
PEX
 
Rehau
 
ASTM F877

EVERLOC+Sleeves
3/8" (104815)   1/2" (104816)   5/8" (104817)   3/4" (104818)  
1" (104819)   1 1/4" (104820)   1 1/2" (104821)   2" (104822)  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

& Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable, with the following fitting system designation(s): AWWA C800.
@ Product is exempted from bearing NSF-pw marking.

Facility : # 12 Canada

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings! § +++ [G]
 
PPSU
 
REHAU
 
ASTM F877

EVERLOC+ Polymer 45° Elbow
1 ½” x 1 ½”  

EVERLOC+ Polymer Coupling
1 ½” x ¾” (435705)  

Everloc+ Polymer Tee
1" x 3/4" x 1/2" (435701)  

EVERLOC+ Polymer 45° Elbow
2” x 2”  

EVERLOC+ Polymer Coupling
1 ½” x 1 ¼” (453704)  

Everloc+ Polymer Tee
1 1/4" x 3/4" x 3/4" (435715)  

EVERLOC+ Polymer Coupling
2” x 1”  

Everloc+ Polymer Tee
1 1/4" x 3/4" x 1 1/4" (435717)  

EVERLOC+ Polymer Coupling
2” x 1 ¼”  

Everloc+ Polymer Tee
1 ¼” x 1” x 1 ¼” (435712)   1 ¼” x 1” x ¾”  

EVERLOC+ Polymer Coupling
2” x 1 ½” (435706)  

Everloc+ Polymer Tee
1 ¼” x 1 ¼” x ½" (435703)   1 ¼” x 1 ¼” x ¾” (435700)   1 1/2" x 3/4" x 1 1/2" (435716)   1 ½” x 1” x ¾”  
1 ½” x 1” x 1" (435719)   1 ½” x 1” 1 ½” (435709)   1 ½” x 1 ¼” x ¾” (435711)   1 ½” x 1 ¼” x 1”  
1 ½” x 1 ¼” x 1 ¼” (435720)   1 ½” x 1 ¼” x 1 ½”   1 ½” x 1 ½” x ½” (435707)   1 ½” x 1 ½” x ¾” (435702)  
1 ½” x 1 ½” x 1 ¼” (435713)   2” x 1 ½” x ¾”   2” x 1 ½” x 1”   2” x 1 ½” x 1 ¼”  
2” x 1 ½” x 1 ½”   2” x 1 ¼” x 2”   2” x 1 ½” x 2”   2” x 2” x ½”  
2” x 2” x ¾” (435721)   2” x 2” x 1 ¼” (435714)   2” x 2” x 1 ½” (435710)   1" x 1/2" x 1" (435809)  

EVERLOC+ Polymer Coupling
1 ¼” x ¾” (435718)  

! Product is Certified whether or not it bears the U.P. Code Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Rehau Construction, LLC. 
1501 Edwards Ferry Road
Leesburg, VA 20176 
United States 
703-777-5255
Visit this company's website

Facility : Frankfort, IL

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings¢ § +++ [G]
 
MLTPL
 
EVERLOC+ Copper Stubout
 
ASTM F877

PEX x Copper Stub-Out Elbows
1/2" - 1"  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Reliance Worldwide / Cash Acme 
2400 7th Avenue Southwest
Cullman, AL 35055 
United States 
877-700-4242 
256-775-8186
Visit this company's website

Facility : Marlette, MI

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings*
 
SS
 
SharkBite® PEX Clamp
 
ASTM F877
3/8" (UC952Z, UC952A, UC952)   1/2" (UC953Z, UC953A, UC953, UC953CP25, UC953CP25Z)   5/8" (UC954)   3/4" (UC955, UC955A, UC955Z, UC955CP25, UC955CP25Z)  
1" (UC956, UC956A, UC956Z)  

* Fittings may be marked with metric size designation.



 
Reliance Worldwide / Cash Acme 
2400 7th Avenue Southwest
Cullman, AL 35055 
United States 
877-700-4242 
256-775-8186

Facility : Zhejiang, China

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings§ +++ [G]
 
Brass
 
SharkBite
 
ASTM F877

Elbow
PEX ELBOW 3/4" X 5/8" WP LF (UC273LF)   PEX SWIVEL ELBOW 1/2" X 1/2"FNPT WP LF (UC532LF)  

Female Adapter
3/4T x 1/2F PEX Female Adapter (UC092LF)   PEX SWIVEL ADAPTER 3/8" X 3/8"FNPT WP LF (UC527LF)   PEX SWIVEL TOILET CONN 1/2"X7/8" WP LF (UC528LF)   PEX SWVL ADAPTER 1/2"X3/4"FNPT BR WP LF (UC534LF)  
PEX SWIVEL ADAPTER 1" X 1"FNPT WP LF (UC594LF)  

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings§ +++ [G]
 
Brass
 
WDK
 
ASTM F877

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



Reliance Worldwide Corporation 
2300 Defoor Hills Road Northwest
Atlanta, GA 30318 
United States 
877-700-4242 
Visit this company's website

Facility : Cullman, AL

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings+++ [G]
 
PPSU
 
Sharkbite
 
ASTM F877

End Detail
1/2" (UP-END-05IN)   3/4" (UP-END-075IN)  

Poly Endcap
1/2" (UP514)   3/4" (UP518)  

Poly Tee
1/2" (UP362)   3/4" (UP370)   3/4" x 3/4" x 1/2" (UP412)  

Poly Elbow
1/2" (UP248)   3/4" (UP256)  

Poly MNPT Adapter
1/2" (UP120)   3/4" (UP134)  

Poly Coupling
1/2" (UP008)   3/4" (UP016)   3/4" x 1/2" (UP058)  

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Reliance Worldwide Corporation 
2400 7th Avenue Southwest
Cullman, AL 35055 
United States 
86 576 7492668

Facility : Zhejiang, China

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings§ +++ [G]
 
Brass
 
Cash Acme/RWC
 
ASTM F877
Ballcock Connector 3/4" Straight UC529LF   Pex Adaptor 3/4" x1" FIP UC086LF  

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Reliance Worldwide Corporation 
2400 7th Avenue SW
Cullman, AL 35055 
United States 
256-775-8206
Visit this company's website

Facility : Tinh Tien Giang, Vietnam

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings§ +++ [1] [G]
 
Brass
 
Cash Acme/RWC
 
ASTM F877
UC008 XXX 1/2" Barb Coupling   UC008 XXX PEX BRASS COUPLING 1/2"   UC016 XXX 3/4" Barb x 3/4" Barb Coupling   UC016 XXX PEX BRASS COUPLING 3/4"  
UC068 XXX PEX BRASS COUPLING 1/2 x 3/4 FPT   UC072 XXX 1/2" Barb x 1/2" FIP Female Adapter   UC088 XXX 3/4" Barb x 3/4" FIP Female Adapter   UC116 XXX 1/2 X 3/4 MPT PEX BRASS MALE ADPT  
UC120 XXX 1/2" Barb x 1/2" MIP Male Adapter   UC134 XXX 3/4" Barb x 3/4" MIP Male Adapter   UC138 XXX 3/4 x 1/2 MPT PEX BRASS MALE ADPT   UC248 XXX 1/2" Barb Elbow  
UC256 XXX 3/4" Barb Elbow   UC308 XXX PEX ELBOW 1/2" X 1/2" FNPT   UC334 XXX 1/2" Barb x 1/2" FIP Drop Ear Elbow   UC362 XXX 1/2" Barb Tee  
UC370 XXX 3/4" Barb Tee   UC4008 XXX PEX ADAPTER 1/2" X 1/2" PB   UC4016 XXX PEX ADAPTER 3/4" X 3/4" PB   UC412 XXX 3/4" Barb x 3/4" Barb x 1/2" Barb Reducing Tee  
UC444 XXX 3/4 X 1/2 X 3/4 PEX BRASS TEE   UC514 XXX 1/2" PEX BRASS PLUG   UC518 XXX 3/4" PEX BRASS PLUG   UC600 XXX PEX SWT ADAPTER 1/2" X 1/2" FEMALE WP  
UC607 XXX PEX SWT ADAPTER 1/2" X 1/2" MALE WP  

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] XXX represented by LF/LFB/LFZ/LFZB/LFB10/LFZB10/LFB5/LFZB5/LFZ10/LFZ20 
    
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Rifeng Enterprise (Foshan) Co., Ltd. 
5th/F, Rifeng Building
16 Zumiao Road 
Foshan, Guangdong 528000 
China 
86 757 8230 1768

Facility : Foshan, China

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Compression Fittings (F1m)* § +++ [2]
 
MLTPL
 
RIFENG
 
ASTM F877
3/8" - 2 1/2"

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[2] For trade names, the use of "m" in trade name indicates use of C69300 alloy.

Compression Fittings (F1-G)* § +++
 
MLTPL
 
RIFENG
 
ASTM F877
3/8" - 2 1/2"

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Crimp Fittings (PF5m)* § +++ [2]
 
MLTPL
 
RIFENG
 
ASTM F877
3/8" - 2 1/2"

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[2] For trade names, the use of "m" in trade name indicates use of C69300 alloy.

Crimp Fittings (PF5-G)* § +++
 
MLTPL
 
RIFENG
 
ASTM F877
3/8" - 2 1/2"

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Press Fittings (F5-G)* § +++
 
MLTPL
 
RIFENG
 
ASTM F877
3/8" - 2 1/2"

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Press Fittings (PF15)% § +++ [G]
 
MLTPL
 
RIFENG
 
ASTM F877
1/8" - 2 1/2"

% Product Listed for use with RIFENG PEX tubing only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Press Fittings (PF15II)% § +++ [G]
 
MLTPL
 
RIFENG
 
ASTM F877
1/8" - 2 1/2"  

% Product Listed for use with RIFENG PEX tubing only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

RIFENG PF15% § +++ [4]
 
Brass
 
RIFENG
 
ASTM F877
1/8" - 2 1/2"

% Product Listed for use with RIFENG PEX tubing only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[4] This product represents the following configurations:
    Equal Straight Union, PF15c-S, 1/8" - 2 1/2"
    Equal Elbow, PF15c-L, 1/8" - 2 1/2"
    Equal Straight Union PF15c(II)-S, 1/8" - 2-1/2"
    Equal Elbow, PF15c(II)-L, 1/8" - 2-1/2"

RIFENG PF15m% § +++ [2] [4]
 
Brass
 
RIFENG
 
ASTM F877
1/8" - 2 1/2"

% Product Listed for use with RIFENG PEX tubing only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[2] For trade names, the use of "m" in trade name indicates use of C69300 alloy.
[4] This product represents the following configurations:
    Equal Straight Union, PF15c-S, 1/8" - 2 1/2"
    Equal Elbow, PF15c-L, 1/8" - 2 1/2"
    Equal Straight Union PF15c(II)-S, 1/8" - 2-1/2"
    Equal Elbow, PF15c(II)-L, 1/8" - 2-1/2"

RIFENG PF15m(II)% § +++ [2] [4]
 
Brass
 
RIFENG
 
ASTM F877
1/8" - 2 1/2"

% Product Listed for use with RIFENG PEX tubing only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[2] For trade names, the use of "m" in trade name indicates use of C69300 alloy.
[4] This product represents the following configurations:
    Equal Straight Union, PF15c-S, 1/8" - 2 1/2"
    Equal Elbow, PF15c-L, 1/8" - 2 1/2"
    Equal Straight Union PF15c(II)-S, 1/8" - 2-1/2"
    Equal Elbow, PF15c(II)-L, 1/8" - 2-1/2"

RIFENG PF15(II)% § +++ [4]
 
Brass
 
RIFENG
 
ASTM F877
1/8" - 2 1/2"

% Product Listed for use with RIFENG PEX tubing only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[4] This product represents the following configurations:
    Equal Straight Union, PF15c-S, 1/8" - 2 1/2"
    Equal Elbow, PF15c-L, 1/8" - 2 1/2"
    Equal Straight Union PF15c(II)-S, 1/8" - 2-1/2"
    Equal Elbow, PF15c(II)-L, 1/8" - 2-1/2"


Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

Crimp Fittings (PF5)* §
 
Brass C37700
 
R
 
ASTM F877
3/8" - 2-1/2"

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Crimp Fittings (PF5)* §
 
DZR Brass
 
R
 
ASTM F877
3/8" - 2 1/2"  

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Fittings§ [1] [2]
 
MLTPL
 
R
 
ASTM F877

Stainless Steel Manifolds
FN16-1F-3/4*n  

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Main inlet/outlet size: 1"
    Sub inlet/outlet size: 3/4"
[2] n is the quantity of subway

Crimp Fittings (PF5)* §
 
Brass C37700
 
Rifeng
 
ASTM F877
3/8" - 2 1/2"

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Crimp Fittings (PF5)* §
 
DZR Brass
 
Rifeng
 
ASTM F877
3/8" - 2 1/2"  

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Fittings§ [1] [2]
 
MLTPL
 
Rifeng
 
ASTM F877

Stainless Steel Manifolds
FN16-1F-3/4*n  

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Main inlet/outlet size: 1"
    Sub inlet/outlet size: 3/4"
[2] n is the quantity of subway

RIFENG PF15% § [3]
 
Brass
 
RIFENG
 
ASTM F877
1/8" - 2 1/2"

% Product Listed for use with RIFENG PEX tubing only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[3] This product represents the following configurations:
    Equal Straight Union, PF15c-S, 1/8" - 2 1/2"
    Equal Elbow, PF15c-L, 1/8" - 2 1/2"
    Equal Straight Union PF15c(II)-S, 1/8" - 2-1/2"
    Equal Elbow, PF15c(II)-L, 1/8" - 2-1/2"

RIFENG PF15m% § [3] [4]
 
Brass
 
RIFENG
 
ASTM F877
1/8" - 2 1/2"

% Product Listed for use with RIFENG PEX tubing only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[3] This product represents the following configurations:
    Equal Straight Union, PF15c-S, 1/8" - 2 1/2"
    Equal Elbow, PF15c-L, 1/8" - 2 1/2"
    Equal Straight Union PF15c(II)-S, 1/8" - 2-1/2"
    Equal Elbow, PF15c(II)-L, 1/8" - 2-1/2"
[4] For trade names, the use of "m" in trade name indicates use of C69300 alloy.

RIFENG PF15m(II)% § [3] [4]
 
Brass
 
RIFENG
 
ASTM F877
1/8" - 2 1/2"

% Product Listed for use with RIFENG PEX tubing only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[3] This product represents the following configurations:
    Equal Straight Union, PF15c-S, 1/8" - 2 1/2"
    Equal Elbow, PF15c-L, 1/8" - 2 1/2"
    Equal Straight Union PF15c(II)-S, 1/8" - 2-1/2"
    Equal Elbow, PF15c(II)-L, 1/8" - 2-1/2"
[4] For trade names, the use of "m" in trade name indicates use of C69300 alloy.

RIFENG PF15(II)% § [3]
 
Brass
 
RIFENG
 
ASTM F877
1/8" - 2 1/2"

% Product Listed for use with RIFENG PEX tubing only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[3] This product represents the following configurations:
    Equal Straight Union, PF15c-S, 1/8" - 2 1/2"
    Equal Elbow, PF15c-L, 1/8" - 2 1/2"
    Equal Straight Union PF15c(II)-S, 1/8" - 2-1/2"
    Equal Elbow, PF15c(II)-L, 1/8" - 2-1/2"

Compression Fittings (F1m)* § [4]
 
MLTPL
 
RIFENG
 
ASTM F877
3/8" - 2 1/2"

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[4] For trade names, the use of "m" in trade name indicates use of C69300 alloy.

Compression Fittings (F1-G)* §
 
MLTPL
 
RIFENG
 
ASTM F877
3/8" - 2 1/2"

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Crimp Fittings (PF5m)* § [4]
 
MLTPL
 
RIFENG
 
ASTM F877
3/8" - 2 1/2"

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[4] For trade names, the use of "m" in trade name indicates use of C69300 alloy.

Crimp Fittings (PF5-G)* §
 
MLTPL
 
RIFENG
 
ASTM F877
3/8" - 2 1/2"

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Press Fittings (PF15)% §
 
MLTPL
 
RIFENG
 
ASTM F877
1/8" - 2 1/2"  

% Product Listed for use with RIFENG PEX tubing only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Press Fittings (F5m)* § [4]
 
MLTPL
 
RIFENG
 
ASTM F877
3/8" - 2 1/2"

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[4] For trade names, the use of "m" in trade name indicates use of C69300 alloy.

Press Fittings (F5-G)* §
 
MLTPL
 
RIFENG
 
ASTM F877
3/8" - 2 1/2"

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Press Fittings (PF15II)% §
 
MLTPL
 
RIFENG
 
ASTM F877

% Product Listed for use with RIFENG PEX tubing only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.



 
Riifo North America 
4737 Smokey Bear Lane
Columbia Falls, MT 59912 
United States 
406-250-4412

Facility : # 1 China

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Compression Fittings (F1-G)* § +++
 
MLTPL
 
RIIFO
 
ASTM F877

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Compression Fittings (F1m)* § +++ [2]
 
MLTPL
 
RIIFO
 
ASTM F877
3/8" - 2 1/2"  

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[2] For trade names, the use of "m" in trade name indicates use of C69300 alloy.

Crimp Fittings (PF5-G)* § +++
 
MLTPL
 
RIIFO
 
ASTM F877
3/8" - 2 1/2"  

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Crimp Fittings (PF5m)* § +++ [2]
 
MLTPL
 
RIIFO
 
ASTM F877
3/8" - 2 1/2"  

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[2] For trade names, the use of "m" in trade name indicates use of C69300 alloy.

Press Fittings (F5-G)* § +++
 
MLTPL
 
RIIFO
 
ASTM F877
3/8" - 2 1/2"  

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Press Fittings (PF15)% § +++ [G]
 
MLTPL
 
RIIFO
 
ASTM F877
1/8" - 2 1/2"  

% Product Listed for use with RIFENG PEX tubing only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Press Fittings (PF15II)% § +++ [G]
 
MLTPL
 
RIIFO
 
ASTM F877
1/8" - 2 1/2"  

% Product Listed for use with RIFENG PEX tubing only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

RIFENG PF15% § +++ [4]
 
Brass
 
RIIFO
 
ASTM F877
1/8" - 2 1/2"  

% Product Listed for use with RIFENG PEX tubing only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[4] This product represents the following configurations:
    Equal Straight Union, PF15c-S, 1/8" - 2 1/2"
    Equal Elbow, PF15c-L, 1/8" - 2 1/2"
    Equal Straight Union PF15c(II)-S, 1/8" - 2-1/2"
    Equal Elbow, PF15c(II)-L, 1/8" - 2-1/2"

RIFENG PF15(II)% § +++ [4]
 
Brass
 
RIIFO
 
ASTM F877
1/8" - 2 1/2"  

% Product Listed for use with RIFENG PEX tubing only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[4] This product represents the following configurations:
    Equal Straight Union, PF15c-S, 1/8" - 2 1/2"
    Equal Elbow, PF15c-L, 1/8" - 2 1/2"
    Equal Straight Union PF15c(II)-S, 1/8" - 2-1/2"
    Equal Elbow, PF15c(II)-L, 1/8" - 2-1/2"

RIFENG PF15m% § +++ [2] [4]
 
Brass
 
RIIFO
 
ASTM F877
1/8" - 2 1/2"  

% Product Listed for use with RIFENG PEX tubing only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[2] For trade names, the use of "m" in trade name indicates use of C69300 alloy.
[4] This product represents the following configurations:
    Equal Straight Union, PF15c-S, 1/8" - 2 1/2"
    Equal Elbow, PF15c-L, 1/8" - 2 1/2"
    Equal Straight Union PF15c(II)-S, 1/8" - 2-1/2"
    Equal Elbow, PF15c(II)-L, 1/8" - 2-1/2"

RIFENG PF15m(II)% § +++ [2] [4]
 
Brass
 
RIIFO
 
ASTM F877
1/8" - 2 1/2"  

% Product Listed for use with RIFENG PEX tubing only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[2] For trade names, the use of "m" in trade name indicates use of C69300 alloy.
[4] This product represents the following configurations:
    Equal Straight Union, PF15c-S, 1/8" - 2 1/2"
    Equal Elbow, PF15c-L, 1/8" - 2 1/2"
    Equal Straight Union PF15c(II)-S, 1/8" - 2-1/2"
    Equal Elbow, PF15c(II)-L, 1/8" - 2-1/2"


Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

Compression Fittings (F1-G)* §
 
MLTPL
 
RIIFO
 
ASTM F877
3/8" - 2 1/2"  

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Compression Fittings (F1m)* § [4]
 
MLTPL
 
RIIFO
 
ASTM F877
3/8" - 2 1/2"  

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[4] For trade names, the use of "m" in trade name indicates use of C69300 alloy.

Crimp Fittings (PF5)* §
 
Brass C37700
 
Riifo
 
ASTM F877
1/2" - 1"

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Crimp Fittings (PF5)* §
 
DZR Brass
 
Riifo
 
ASTM F877
1/2" - 1"  

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Crimp Fittings (PF5)* §
 
Brass C37700
 
RIIFO
 
ASTM F877
3/8" - 2 1/2"  

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Crimp Fittings (PF5)* §
 
DZR Brass
 
RIIFO
 
ASTM F877
3/8" - 2 1/2"  

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Crimp Fittings (PF5)* §
 
DZR Brass
 
RIIFO
 
ASTM F877
3/8" - 2 1/2"  

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Crimp Fittings (PF5-G)* §
 
MLTPL
 
RIIFO
 
ASTM F877
3/8" - 2 1/2"  

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Crimp Fittings (PF5m)* § [4]
 
MLTPL
 
RIIFO
 
ASTM F877
3/8" - 2 1/2"  

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[4] For trade names, the use of "m" in trade name indicates use of C69300 alloy.

Fittings§ [1] [2]
 
MLTPL
 
Riifo
 
ASTM F877

Stainless Steel Manifolds
FN16-1F-3/4*n  

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Main inlet/outlet size: 1"
    Sub inlet/outlet size: 3/4"
[2] n is the quantity of subway

Fittings§ [1] [2]
 
MLTPL
 
RIIFO
 
ASTM F877

Stainless Steel Manifolds
FN16-1F-3/4*n  

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Main inlet/outlet size: 1"
    Sub inlet/outlet size: 3/4"
[2] n is the quantity of subway

Press Fittings (F5-G)* §
 
MLTPL
 
RIIFO
 
ASTM F877
3/8" - 2 1/2"  

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Press Fittings (F5m)* § [4]
 
MLTPL
 
RIIFO
 
ASTM F877
3/8" - 2 1/2"  

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[4] For trade names, the use of "m" in trade name indicates use of C69300 alloy.

Press Fittings (PF15)% §
 
MLTPL
 
RIIFO
 
ASTM F877
1/8" - 2 1/2"  

% Product Listed for use with RIFENG PEX tubing only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Press Fittings (PF15II)% §
 
MLTPL
 
RIIFO
 
ASTM F877

% Product Listed for use with RIFENG PEX tubing only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

RIFENG PF15% § [3]
 
Brass
 
RIIFO
 
ASTM F877
1/8''- 2 1/2''  

% Product Listed for use with RIFENG PEX tubing only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[3] This product represents the following configurations:
    Equal Straight Union, PF15c-S, 1/8" - 2 1/2"
    Equal Elbow, PF15c-L, 1/8" - 2 1/2"
    Equal Straight Union PF15c(II)-S, 1/8" - 2-1/2"
    Equal Elbow, PF15c(II)-L, 1/8" - 2-1/2"

RIFENG PF15(II)% § [3]
 
Brass
 
RIIFO
 
ASTM F877
1/8''- 2 1/2''  

% Product Listed for use with RIFENG PEX tubing only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[3] This product represents the following configurations:
    Equal Straight Union, PF15c-S, 1/8" - 2 1/2"
    Equal Elbow, PF15c-L, 1/8" - 2 1/2"
    Equal Straight Union PF15c(II)-S, 1/8" - 2-1/2"
    Equal Elbow, PF15c(II)-L, 1/8" - 2-1/2"

RIFENG PF15m% § [3] [4]
 
Brass
 
RIIFO
 
ASTM F877
1/8''- 2 1/2''  

% Product Listed for use with RIFENG PEX tubing only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[3] This product represents the following configurations:
    Equal Straight Union, PF15c-S, 1/8" - 2 1/2"
    Equal Elbow, PF15c-L, 1/8" - 2 1/2"
    Equal Straight Union PF15c(II)-S, 1/8" - 2-1/2"
    Equal Elbow, PF15c(II)-L, 1/8" - 2-1/2"
[4] For trade names, the use of "m" in trade name indicates use of C69300 alloy.

RIFENG PF15m(II)% § [3] [4]
 
Brass
 
RIIFO
 
ASTM F877
1/8''- 2 1/2''  

% Product Listed for use with RIFENG PEX tubing only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[3] This product represents the following configurations:
    Equal Straight Union, PF15c-S, 1/8" - 2 1/2"
    Equal Elbow, PF15c-L, 1/8" - 2 1/2"
    Equal Straight Union PF15c(II)-S, 1/8" - 2-1/2"
    Equal Elbow, PF15c(II)-L, 1/8" - 2-1/2"
[4] For trade names, the use of "m" in trade name indicates use of C69300 alloy.



 
RWC UK Ltd. DBA John Guest 
Horton Road
West Drayton 
Middlesex UB7 8JL 
United Kingdom 
44 189 544 9233
Visit this company's website

Facility : Middlesex, United Kingdom

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings# § +++ [G]
 
MLTPL
 
Speedfit
 
ASTM F877

Bent Tap Connector (PEIBTCX)
½” CTS (Port) x ½” NPS (Thread) (Female)(PEIBTC2034)   1/2" CTS x 1/2" NPS (25635)  

End Cap (PEI46X or PSEI46X)
3/4" CTS (PSEI4628)   1/2" CTS (25633)   1/2" CTS (PSEI4620)   1" CTS (PEI4636)  

Equal Elbow Connector (PEI03X)
1/2" CTS (25633)   1/2" CTS (PEI0320)   3/4" CTS (PEI0328)   1" CTS (PEI0336)  

Equal Straight Connector (PEI04X)
3/4" CTS (PEI0428)   1" CTS (PEI0436)   1/2" CTS (PEI0420)  

Equal Tee Connector (PEI02X)
1/2" CTS (PEI0220)   3/4" CTS (PEI0228)   1" CTS (PEI0236)  

Female Adaptor (PEI45X)
1/2" CTS x 1/2 NPT (PEI452034)  

Reducing Elbow Connector (PEI21X)
1” CTS x 3/4” CTS (PEI213628)   3/4" CTS x 1/2" CTS (PEI212820)  

Reducing Straight Connector (PEI20X)
1” CTS x 3/4” CTS (PEI203628)   3/4" CTS x 1/2" CTS (PEI202820)  

Reducing Tee Connector (PEI30X)
1" x 1" x 3/4" CTS (PEI3036A)   3/4" x 3/4" x 1/2" CTS (PEI3028A)   3/4" x 1/2" x 3/4" CTS (PEI3028D)   3/4" x 1/2" x 1/2" CTS (PEI3028B)  
1/2" x 1/2" x 3/4" CTS (PEI3028C)  

Slip Connector
3/4" CTS (3/4SCP)   1/2" CTS (1/2SCP)  

Stem Connector
1" CTS x 1 1/4" Special (NC2438E)   3/4" CTS x 1 1/4" Special (NC2769)  

Stem Elbow
3/4" CTS x 1 1/4" CTS (NC2521)  

Stem Elbow Connector (PEI22X)
3/4" CTS (Stem) x 3/4" CTS (Pushfit) (PEI222828)   1" CTS (Stem) to 1" CTS (Pushfit) (PEI223636)   1/2" CTS (Stem) x 1/2" CTS (Pushfit) (PEI222020)  

Stem Tee (PEI53X)
3/4" CTS x 3/4" Stem x 3/4" CTS Tee (PEI532828)   3/4" CTS x 3/4" Stem x 1/2" CTS Tee (PEI532820)   1/2" CTS x 1/2" Stem x 1/2" CTS Tee (PEI532020)  

Straight Stem Reducer (PEI06X)
1" CTS (Stem) x 3/4" CTS (Pushfit) (PEI063628)   3/4" CTS (Stem) x 1/2" CTS (Pushfit) (PEI062820)  

Straight Tap Connector (PEISTCX)
1/2" CTS x 1/2" NPS (PEISTC2034)   1/2" CTS x 7/8"-15/16" (PEISTC20C75)  

Superseal Tube Support (STSIX)
3/4" CTS (STSI28)   1/2" CTS (STSI20)   1" CTS (STSI36)  

Tube Support (TSIX)
1" CTS (TSI36)   1/2" CTS (TSI20)   3/4" CTS (TSI28)  

# X may represent catalogue series number, outer diameter tube size, thread type and size,
  and/or body color. Each may be designated by the following: 
  
  Catalogue series number = 01 - 49 
  OD tube size = 02 - 22 
  Thread type and size = 01 - 38 
  Color = B (blue), Br (brown), E (black), G (green), N (natural), R (red), S (standard
  two tone grey), W (white), Y (yellow) 
  
  Body Color may be W (white) or E (black). 
  
  All suffixes may or may not be included in the fitting trade name.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Safelink Systems, Inc. DBA MrPEX Systems 
14799 Jackal Street NW
Suite 100 
Ramsey, MN 55303 
United States 
800-716-3406 
952-652-2472
Visit this company's website

Facility : # 3

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

SS Press Sleeves! $ ¢ §
 
SS
 
MrPEX
 
ASTM F877
1/2" - 2"

! Product(s) are exempt from bearing the U.P. Code Mark.
$ Product(s) are tested and Certified as an authorized component of the NSF® Certified
  Safelink tubing and NSF® Certified Safelink fitting system.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.



 
Sioux Chief Manufacturing, Inc. 
24110 South Peculiar Drive
Peculiar, MO 64078 
United States 
800-779-6104 
816-779-6104

Facility : # 1 USA

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings* + ¢ § +++ [G]
 
Brass
 
 
ASTM F877

Swivel Assembly (PEX x FPT- Straight)
3/8" x 1/2" [637XG10PK1M]  

Adapter (PEX x Female Sweat)
3/8" x 1/2" [644XG1]  

Adapter (PEX x PB)
3/8" x 3/8" [645XG1G]  

Adapter (PEX x Special Male Sweat)
1/2" x 1/2" [672XG]  

Adapter Assy (PEX x FPT Swivel)
3/4" x 3/4" [633XG02]  

Adapters (PEX x FPT)
1/2" x 1/8" [637XG21]  

Adapters (PEX x M Sweat)
3/8" x 1/2" [643XG1]  

Adapters (PEX x MPT)
3/8" x 1/2" [646XG21PK1M]  

Elbow (PEX x MPT)
1/2" x 3/8" [632X221M]  

Elbow (PEX x PEX)
3/8" x 3/8" [642XG1]  

Female Pipe Straight Adapter (PEX x FP)
1" x 1" [647XG4]  

Male Pipe Elbow Adapter (PEX x MP)
1/2" x 3/4" [632X232M]  

Male Pipe Straight Adapter (PEX x MP)
3/4" x 1" [646XG43]  

Plug (PEX)
3/8" [640XG01]  

Tee (PEX x PEX x PEX)
3/8" x 3/8" x 3/8" [641XG111]  

Tee Adapter (PEX x PEX x MP)
1/2" x 1/2" x 1/2" [641XG222M]  

Tee Adapter (PEX x PEX x PEX)
3/4" x 3/4" x 1" [641XG34]  

Termination Elbow Assy (PEX x Termination)
1/2" x 1/2" [637XG25]  

Drop Ear Elbow (FPT)
1/2" x 1/2" (647XG2EPK1M)  

Elbow Adapter (PEX X FNPT)
1/2" x 1/2" [632XG222FPK1M]  

Adapter Assy (PEX x Termination)
1/2" x 3/4" [633XG202PK1M]  

Elbow (PEX x Barb x Female Sweat)
1/2" x 1/2" [632XG225PK1M]  

Elbow Adapter (PEX X FNPT)
1/2" X 1/2" [632XG222FPK1M]  

Connectors (PEX x PEX)
3/8" x 3/8" [645XG1]   3/8" x 3/8" [645XG1PK1M]  

Elbow (PEX x MPT)
1/2" x 3/8" [632XG221MPK1M]  

Adapters (PEX x MPT)
1/2" X 3/8" [646XG12PK1M]  

Adapters (PEX x M Sweat)
1/2" x 1/2" [643XG2]  

Adapters (PEX x FPT)
1/2" x 1/2" [647XG2]  

Adapter Assy (PEX x FPT Swivel)
3/4" x 3/4" [633XG02PK1M]  

Adapter (PEX x PB)
1/2" x 1/2" [645XG2G]  

Elbow Adapter (PEX X FNPT)
1/2" X 3/4" [632XG232FPK1M]  

Elbow (PEX x Barb x Female Sweat)
1/2" x 3/4" [632XG235PK1M]  

Elbow Adapter (PEX X FNPT)
1/2" x 3/4" [632XG232FPK1M]  

Drop Ear Elbow (FPT)
1/2" x 1/2" (647XG2EPK5M)  

Termination Elbow Assy (PEX x Termination)
1/2" x 3/4" [633XG202PK1M]  

Tee Adapter (PEX x PEX x PEX)
1" x 1" x 1/2" [641XG442]  

Tee (PEX x PEX x PEX)
3/8" x 3/8" x 3/8" [641XG111PK1M]  

Adapter (PEX x Female Sweat)
1/2" x 1/2" [644XG2]  

Plug (PEX)
1/2" [640XG02]  

Elbow (PEX x PEX)
3/8" x 3/8" [642XG1PK1M]  

Female Pipe Straight Adapter (PEX x FP)
1" x 1" [647XG4PK1M]  

Male Pipe Elbow Adapter (PEX x MP)
3/4" x 3/4" [632XG332M]  

Male Pipe Straight Adapter (PEX x MP)
3/4" x 1" [646XG43PK1M]  

Connectors (PEX x PEX)
1/2" x 3/8" [645XG12]  

Elbow Adapter (PEX X FNPT)
3/4" X 1/2" [632XG322FPK1M]  

Adapter (PEX x PB)
1/2" x 1/2" [645XG2GPK1M]  

Adapters (PEX x M Sweat)
1/2" x 1/2" [643XG2PK1M]  

Tee (PEX x PEX x PEX)
3/8" x 3/8" x 1/2" [641XG112]  

Elbow (PEX x Barb x Female Sweat)
3/4" x 3/4" [632XG335PK1M]  

Adapter (PEX x Female Sweat)
1/2" x 1/2" [644XG2PK1M]  

Plug (PEX)
1/2" [640XG03PK1M]  

Adapters (PEX x MPT)
1/2" x 1/2" [646XG2]  

Elbow Adapter (PEX X FNPT)
3/4" X 1/2" [632XG322FPK1M]  

Male Pipe Straight Adapter (PEX x MP)
1" x 3/4" [646XG34]  

Adapters (PEX x FPT)
1/2" x 1/2" [647XG2PK1M]  

Drop Ear Elbow (FPT)
3/4" X 1/2" (647XG23E3PK1M)  

Elbow (PEX x MPT)
1/2" x 1/2" [632XG222M]  

Elbow (PEX x PEX)
1/2" x 1/2" [642XG2]  

Tee Adapter (PEX x PEX x PEX)
1" x 1" x 3/4" [641XG442PK1M]  

Plug (PEX)
1/2" [640XG03PK3M]  

Tee (PEX x PEX x PEX)
1/2" x 3/8" x 3/8" [641XG211]  

Adapter (PEX x Female Sweat)
1/2" x 1/2" [644XG2PK3M]  

Adapter (PEX x PB)
3/4" X 3/4" [645XG3G]  

Adapters (PEX x FPT)
1/2" x 1/2" [647XG2PK3M]  

Adapters (PEX x M Sweat)
3/4" x 1/2" [643XG23PK1M]  

Adapters (PEX x MPT)
1/2" x 1/2" [646XG2PK1M]  

Connectors (PEX x PEX)
1/2" x 3/8" [645XG21PK1M]  

Elbow (PEX x MPT)
1/2" x 1/2" [632XG222MPK1M]  

Elbow (PEX x PEX)
1/2" x 1/2" [642XG2PK1M]  

Adapters (PEX x FPT)
1/2" x 3/4" [647XG23]  

Elbow (PEX x PEX)
1/2" x 1/2" [642XG2PK3M]  

Elbow (PEX x MPT)
1/2" x 3/4" [632XG232MPK1M]  

Connectors (PEX x PEX)
1/2" x 1/2" [645XG2]  

Adapters (PEX x MPT)
1/2" x 1/2" [646XG2PK3M]  

Adapters (PEX x M Sweat)
3/4" x 3/4" [643XG3]  

Adapter (PEX x PB)
3/4" X 3/4" [645XG3GPK1M]  

Adapter (PEX x Female Sweat)
3/4" x 1/2" [644X32]  

Tee (PEX x PEX x PEX)
1/2" x 3/8" x 1/2" [641XG212]  

Plug (PEX)
3/4" [640XG03]  

Adapters (PEX x M Sweat)
3/4" x 3/4" [643XG3PK1M]  

Adapters (PEX x FPT)
1/2" x 3/4" [647XG32PK1M]  

Elbow (PEX x PEX)
3/4" x 1/2" [642XG23]  

Plug (PEX)
3/4" [640XG03PK1M]  

Elbow (PEX x MPT)
3/4" X 1/2" [632XG322MPK1M]  

Tee (PEX x PEX x PEX)
1/2" x 1/2" x 3/8" [641XG221]  

Connectors (PEX x PEX)
1/2" x 1/2" [645XG2PK1M]  

Adapter (PEX x Female Sweat)
3/4" x 3/4" [644XG3]  

Adapter (PEX x PB)
1" x 1" [645XG4G]  

Adapters (PEX x MPT)
1/2" x 3/4" [646XG32]  

Adapter (PEX x Female Sweat)
3/4" x 3/4" [644XG3PK1M]  

Connectors (PEX x PEX)
1/2" x 1/2" [645XG2PK3M]  

Tee (PEX x PEX x PEX)
1/2" x 1/2" x 1/2" [641XG222]  

Adapters (PEX x M Sweat)
1" x 1" [343XG4]  

Elbow (PEX x PEX)
3/4" x 1/2" [642XG32PK1M]  

Plug (PEX)
1" [640XG04]  

Adapters (PEX x MPT)
1/2" x 3/4" [646XG32PK1M]  

Elbow (PEX x MPT)
3/4" x 3/4" [632XG332MPK1M]  

Adapters (PEX x FPT)
3/4" x 3/4" [647XG3]  

Tee (PEX x PEX x PEX)
1/2" x 1/2" x 1/2" [641XG222PK1M]  

Connectors (PEX x PEX)
3/4" x 1/2" [645XG32]  

Adapters (PEX x FPT)
3/4" x 3/4" [647XG3PK1M]  

Adapter (PEX x Female Sweat)
1" x 1" [644XG4]  

Plug (PEX)
1" [640XG04PK1M]  

Adapters (PEX x MPT)
3/4" x 1/2" [646XG23]  

Elbow (PEX x PEX)
3/4" x 3/4" [642XG3]   3/4" x 3/4" [642XG3PK1M]  

Connectors (PEX x PEX)
3/4" x 1/2" [645XG32PK1M]  

Adapters (PEX x FPT)
3/4" x 3/4" [647XG3PK3M]  

Tee (PEX x PEX x PEX)
1/2" x 1/2" x 1/2" [641XG222PK3M]  

Adapters (PEX x MPT)
3/4" x 1/2" [646XG23PK1M]  

Adapter (PEX x Female Sweat)
1" x 1" [644XG4PK1M]  

Connectors (PEX x PEX)
3/4" x 1/2" [645XG32PK1M]  

Adapters (PEX x FPT)
3/4" x 1" [647XG34]  

Adapters (PEX x MPT)
3/4" x 3/4" [646XG3]  

Tee (PEX x PEX x PEX)
1/2" x 1/2" x 3/4" [641XG223]  

Elbow (PEX x PEX)
3/4" x 3/4" [642XG3PK3M]  

Adapters (PEX x MPT)
3/4" x 3/4" [646XG3PK1M]  

Elbow (PEX x PEX)
1" x 1" [642XG4]  

Adapters (PEX x FPT)
3/4" x 1" [647XG43PK1M]  

Connectors (PEX x PEX)
3/4" x 3/4" [645XG3]  

Tee (PEX x PEX x PEX)
1/2" x 1/2" x 3/4" [641XG223PK1M]  

Connectors (PEX x PEX)
3/4" x 3/4" [645XG3PK3M]  

Elbow (PEX x PEX)
1" x 1" [642XG4PK1M]  

Adapters (PEX x MPT)
3/4" x 3/4" [646XG3PK3M]  

Tee (PEX x PEX x PEX)
3/4" x 1/2" x 1/2" [641XG322]  

Connectors (PEX x PEX)
1" x 1/2" [645XG42]  

Tee (PEX x PEX x PEX)
3/4" x 1/2" x 1/2" [641XG322PK1M]  

Adapters (PEX x MPT)
1" x 3/4" [646XG34]   1" x 3/4" [646XG34PK1M]  

Connectors (PEX x PEX)
1" x 3/4" [645XG43]  

Tee (PEX x PEX x PEX)
3/4" x 1/2" x 3/4" [641XG323]  

Adapters (PEX x MPT)
1" x 1" [646XG4]  

Connectors (PEX x PEX)
1" x 3/4" [645XG43PK1M]  

Tee (PEX x PEX x PEX)
3/4" x 1/2" x 3/4" [641XG323PK1M]  

Connectors (PEX x PEX)
1" x 1" [645XG4]  

Adapters (PEX x MPT)
1" x 1" [646XG4PK1M]  

Tee (PEX x PEX x PEX)
3/4" x 3/4" x 3/8" [641XG31]   3/4" x 3/4" x 1/2" [641XG32]  

Connectors (PEX x PEX)
1" x 1" [645XG4PK1M]  

Tee (PEX x PEX x PEX)
3/4" x 3/4" x 1/2" [641XG332PK3M]   3/4" x 3/4" x 1/2" [641XG332PK1M]   3/4" x 3/4" x 3/4" [641XG33]   3/4" x 3/4" x 3/4" [641XG333PK1M]  
3/4" x 3/4" x 3/4" [641XG333PK3M]   3/4" x 3/4" x 1" [641XG334PK1M]   1" x 1/2" x 3/4" [641XG423]   1" x 3/4" x 1/2" [641XG432]  
1" x 3/4" x 3/4" [641XG433]   1" x 3/4" x 3/4" [641XG433PK1M]   1" x 1/2" x 1" [641XG424]   1" x 3/4" x 1" [641XG434]  
1" x 1" x 1/2" [641XG434PK1M]   1" x 1" x 3/4" [641XG443]   1" x 1" x 3/4" [641XG443PK1M]   1" x 1" x 1" [641XG444]  
1" x 1" x 1" [641XG444PK1M]  

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings¢ § +++ [G]
 
MLTPL
 
 
ASTM F877

Couplings
1/2" x 1/2" [645AG2]  

Plugs
1/2" [640AG2]  

Copper Adapters
1/2" x 1/2" F2080 C Female (Sweat) [644AG2]  

Bullhead Tees
1/2" x 1/2" x 3/4" [641AG223]  

Branch and Run Red Tees
3/4" x 1/2" x 1/2" [641AG322]  

Branch Reducing Tees
3/4" x 3/4" x 1/2" [641AG332]  

Straight Tees
1/2" x 1/2" x 1/2" [641AG222]  

Run Reducing Tees
1 1/4" x 1" x 1 1/4" [641AG545]  

Reducing Couplings
3/4" x 1/2" [645AG32]  

Female Swivel Adapters
1/2" F2080 x 1/2" NPS Female Swivel [637AG20]  

Female Adapters
1/2" F2080 x 1/2" FPT [647AG2]  

Elbows
1/2" x 1/2" [642AG2]  

Dual MPT/Copper Adapters
1/2" F2080 x 1/2" MPT or 1/2" C Female (Sweat) [644AG2]  

Drop Ear Elbow - ELOC to FPT
1/2" x 1/2" [647AG2E]  

Drop Ear Elbow - ELOC Dual MPT/Copper
1/2" x 1/2" MPT or 1/2" C Female [646AG2E]  

Plugs
3/4" [640AG3]  

Couplings
3/4" x 3/4" [645AG3]  

Female Swivel Adapters
3/4" F2080 x 3/4" NPS Female Swivel [637AG30]  

Straight Tees
3/4" x 3/4" x 3/4" [641AG333]  

Female Adapters
3/4" F2080 x 3/4" FPT [647AG3]  

Branch and Run Red Tees
1" x 3/4" x 3/4" [641AG433]  

Elbows
3/4" x 3/4" [642AG3]  

Bullhead Tees
3/4" x 3/4" x 1" [641AG334]  

Dual MPT/Copper Adapters
3/4" F2080 x 3/4" MPT or 1/2" C Female (Sweat) [646AG3]  

Run Reducing Tees
1 1/2" x 1" x 1 1/2" [641AG646]  

Drop Ear Elbow - ELOC to FPT
3/4" x 3/4" [647AG3E]  

Branch Reducing Tees
1" x 1" x 1/2" [641AG433]  

Drop Ear Elbow - ELOC Dual MPT/Copper
3/4" x 3/4" MPT or 1/2" C Female [640AG3E]  

Reducing Couplings
1" x 3/4" [645AG43]  

Copper Adapters
3/4" x 1" F2080 C Female (Sweat) [644AG43]   3/4" x 3/4" F2080 C Male (Street) or 1/2" C Female (Sweat) [643AG3]  

Couplings
1" x 1" [645AG4]  

Drop Ear Elbow - ELOC to FPT
1" x 1" [647AG4E]  

Dual MPT/Copper Adapters
1" F2080 x 1" MPT or 3/4" C Female (Sweat) [646AG4]  

Elbows
1" x 1" [642AG4]  

Female Adapters
1" F2080 x 1" FPT [647AG3]  

Plugs
1" [640AG4]  

Reducing Couplings
1 1/4" x 1" [645AG54]  

Run Reducing Tees
2" x 1/2" x 2" [641AG767]  

Straight Tees
1" x 1" x 1" [641AG444]  

Branch Reducing Tees
1" x 1" x 3/4" [641AG534]  

Branch and Run Red Tees
1 1/4" x 3/4" x 1" [641AG534]  

Copper Adapters
3/4" x 1" F2080 C Male (Street) or 3/4" C Female (Sweat) [643AG3]  

Dual MPT/Copper Adapters
1 1/4" F2080 x 1 1/4" MPT or 1" C Female (Sweat) [646AG5]  

Run Reducing Tees
1 1/2" x 1 1/4" x 1 1/2" [641AG656]  

Branch and Run Red Tees
1 1/4" x 1" x 1" [641AG544]  

Reducing Couplings
1 1/2" x 1" [645AG64]  

Plugs
1 1/4" [640AG5]  

Elbows
1 1/4" x 1 1/4" [642AG5]  

Straight Tees
1 1/4" x 1 1/4" x 1 1/4" [641AG555]  

Couplings
1 1/4" x 1 1/4" [645AG5]  

Branch Reducing Tees
1 1/4" x 1 1/4" x 3/4" [241AG544]  

Couplings
1 1/2" x 1 1/2" [645AG6]  

Copper Adapters
1" x 1" F2080 C Male (Street) or 3/4" C Female (Sweat) [643AG4]  

Elbows
1 1/2" x 1 1/2" [642AG6]  

Straight Tees
1 1/2" x 1 1/2" x 1 1/2" [641AG666]  

Branch Reducing Tees
1 1/4" x 1 1/4" x 1" [641AG634]  

Reducing Couplings
1 1/2" x 1 1/4" [645AG65]  

Run Reducing Tees
2" x 1 1/4" x 2" [641AG757]  

Branch and Run Red Tees
1 1/2" x 3/4" x 1" [641AG634]  

Dual MPT/Copper Adapters
1 1/2" F2080 x 1 1/2" MPT or 1 1/4" C Female (Sweat) [646AG6]  

Straight Tees
2" x 2" x 2" [641AG777]  

Run Reducing Tees
1" x 3/4" x 1" [641AG434]  

Reducing Couplings
2" x 1" [645AG74]  

Elbows
2" x 2" [642AG7]  

Dual MPT/Copper Adapters
2" F2080 x 2" MPT or 1 1/2" C Female (Sweat) [646AG7]  

Couplings
2" x 2" [645AG7]  

Branch Reducing Tees
1 1/2" x 1 1/2" x 1" [641AG644]  

Copper Adapters
1" x 1 1/4" F2080 C Male (Street) or 1" C Female (Sweat) [643AG4]  

Branch and Run Red Tees
1 1/2" x 1" x 1" [641AG644]  

Copper Adapters
1 1/4" x 1 1/4" F2080 C Male (Street) or 1" C Female (Sweat) [643AG5]  

Reducing Couplings
2" x 1 1/4" [645AG75]  

Run Reducing Tees
3/4" x 1/2" x 3/4" [641AG323]  

Branch Reducing Tees
1 1/2" x 1 1/2" x 1 1/4" [641AG654]  

Branch and Run Red Tees
1 1/2" x 1 1/4" x 1" [641AG654]   1 1/2" x 1 1/4" x 1 1/4" [641AG655]  

Branch Reducing Tees
2" x 2" x 1" [641AG655]  

Reducing Couplings
2" x 1 1/2" [645AG76]  

Copper Adapters
1 1/4" x 1 1/2" F2080 C Male (Street) or 1 1/4" C Female (Sweat) [644AG5]  

Branch Reducing Tees
2" x 2" x 1 1/4" [641AG775]  

Copper Adapters
1 1/2" x 1 1/2" F2080 C Male (Street) or 1 1/2" C Female (Sweat) [643AG6]  

Branch and Run Red Tees
2" x 1 1/2" x 1" [641AG765]  

Copper Adapters
1 1/2" x 2" F2080 C Male (Street) or 1 1/2" C Female (Sweat) [644AG6]  

Branch and Run Red Tees
2" x 1 1/2" x 1 1/4" [641AG765]  

Branch Reducing Tees
2" x 2" x 1 1/2" [641AG776]  

Branch and Run Red Tees
2" x 1 1/4" x 1 1/4" [641AG755]  

Copper Adapters
2" x 2" F2080 C Male (Street) or 1 1/2" C Female (Sweat) [643AG7]  

Branch and Run Red Tees
2" x 1 1/2" x 1 1/2" [641AG766]  

Copper Adapters
2" x 2 1/2" F2080 C Male (Street) or 2" C Female (Sweat) [644AG7]  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : Chesnee, SC

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings! * + ¢ § +++ [G]
 
Brass
 
Sioux Chief
 
ASTM F877

Adapter (PEX x Female Sweat)
1/2" x 1/2" [644XG2]   1/2" x 3/4" [644XG32]   3/4" x 3/4" [644XG3]   1" x 1" [644XG4]  

Adapter Assy (PEX x FPT Swivel)
3/4" x 3/4" [633XG02]  

Adapter Assy (PEX x Termination)
1/2" x 3/4" [633XG202]  

Adapters (PEX x FPT)
1/2" x 1/2" [647XG2]   1/2" x 3/4" [647XG32]   3/4" x 1/2" [647XG23]   3/4" x 3/4" [647XG3]  
3/4" x 1" [647XG43]   1" x 1" [647XG4]  

Adapters (PEX x M Sweat)
1/2" x 1/2" [643XG2]   3/4" x 3/4" [643XG3]  

Adapters (PEX x MPT)
3/8" x 1/2" [646XG21]   1/2" x 3/8" [646XG12]   1/2" x 1/2" [646XG2]   1/2" x 3/4" [646XG32]  
3/4" x 1/2" [646XG23]   3/4" x 3/4" [646XG3]   3/4" x 1" [646XG43]   1" x 3/4" [646XG34]  
1" x 1" [646XG4]  

Assembly (PEX x FPT - straight)
3/8" x 1/2" [637XG10]  

Connectors (PEX x PEX)
3/8" x 3/8" [645XG1]   1/2" x 3/8" [645XG21]   1/2" x 1/2" [645XG2]   3/4" x 1/2" [645XG32]  
3/4" x 3/4" [645XG3]   1" x 3/4" [645XG43]   1" x 1" [645XG4]  

Elbow (PEX x MPT)
1/2" x 3/8" [632XG221]   1/2" x 1/2" [632XG222]   1/2" x 3/4" [632XG232]   3/4" X 1/2" [632XG322]  
3/4" x 3/4" [632XG332]  

Elbow (PEX x PEX)
3/8" x 3/8" [642XG1]   1/2" x 1/2" [642XG2]   3/4" x 1/2" [642XG32]   3/4" x 3/4" [642XG3]  
1" x 1" [642XG4]  

Elbow Adapter (PEX X FNPT)
1/2" X 1/2" [632XG222F]   1/2" X 3/4" [632XG232F]   3/4" X 1/2" [632XG322F]   3/4" x 3/4" [632XG332F]  

Elbow Drop Ear (FPT)
1/2" x 1/2" [647XG2E]   3/4" x 1/2" [647XG23E3]  

Plug (PEX)
1/2" [640XG02]   3/4" [640XG03]   1" [640XG04]  

Tee (PEX x PEX x PEX)
3/8" x 3/8" x 3/8" [641XG111]   1/2" x 1/2" x 1/2" [641XG222]   1/2" x 1/2" x 3/4" [641XG223]   3/4" x 1/2" x 1/2" [641XG322]  
3/4" x 1/2" x 3/4" [641XG323]   3/4" x 3/4" x 1/2" [641XG332]   3/4" x 3/4" x 3/4" [641XG333]   1" x 3/4" x 3/4" [641XG433]  
1" x 1" x 1/2" [641XG434]   1" x 1" x 3/4" [641XG443]   1" x 1" x 1" [641XG444]  

Tee Adapter (PEX x PEX x PEX)
3/4" x 3/4" x 1" [641XG334]   1" x 1" x 3/4" [641XG442]  

Termination Elbow Assy (PEX x Termination)
1/2" x 1/2" [637XG25]  

! All products may have an optional V and/or B at the end of the part number, or could
  have a M/P, PK, and quantity for packaging. 
* Accepted by NSF for use in residential and commercial construction,  including
  manufactured housing.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
THC Chile S.A. 
Mar del Sur No 7481
Barrio Industrial Pudahuel 
Pudahuel, Santiago 
Chile 
56 2 749 1002

Facility : Santiago, Chile

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings§ +++ [G]
 
PLS
 
Flair-It Insert**
 
ASTM F877

Barb Coupling
3/8" x 3/8" (28855)   1/2" (28840)   1/2" x 3/8" (28853)   3/4" (28846)  
3/4" x 1/2" (28845)   1" x 3/4" (28773)   1" x 1" (28771)  

Barb Elbow
3/8" x 3/8" (28815)   1/2" (28800)   1/2" x 3/8" (28810)   1/2" x 1/2" MPT (28803)  
1/2" x 3/4" (28805)   3/4" (28806)   3/4" x 3/4" (28809)   1" x 1" (28770)  

Barb Plug
3/8" (28862)   1/2" (28863)   3/4" (28864)   1" (28768)  

Barb Tee
3/8" x 3/8" x 3/8" (28831)   1/2" (28820)   1/2" x 1/2" x 1/2" MPT (28822)   1/2" x 1/2" SW x 1/2" (28828)  
1/2" x 1/2" x 3/4" (28823)   3/4" (28827)   3/4" x 1/2" x 1/2" (28824)   3/4" x 1/2" x 3/4" (28825)  
3/4" x 3/4" x 1/2" (28826)   1" x 3/4" x 3/4" (28777)   1" x 3/4" x 1" (28778)   1" x 1" x 1/2" (28775)  
1" x 1" x 3/4" (28776)   1" x 1" x 1" (28769)  

Barb x FPT Swivel Adapter
3/8" x 1/2" (28874)   1/2" (28873)   1/2" x 3/4" (28856)   3/4" x 3/4" (28849)  
1" x 1" (28780)  

Barb x FPT Swivel Elbow
1/2" (28816)  

Barb x MPT Adapter
1/2" (28842)   1/2" x 3/4" (28868)   3/4" x 1/2" (28857)   3/4" x 3/4" (28848)  
1" x 1" (28779)  

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
** These products are also represented by the trade names: THC and ECOPOLY.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Manifolds§ +++ [1] [G]
 
PLS
 
Flair-It Manifold**
 
ASTM F877
Two-port: 1" end x 3/4" end with 1/2" ports (7900)   Four-port: 1" end x 3/4" end, with 1/2" ports (7901)   1/2" Manifold Cap (07918)[2]   3/4" Manifold Cap (07919)[2]  
1" FPT x 3/4" MPT Connector (7917)[2]   1" MPT x 1" FPT Connector (07921)[2]   1" FPT X 3/4" FPT Connector (07920)[2]  

[2] Part of the manifold kit.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
** These products are also represented by the trade names: THC and ECOPOLY.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] Certified as a system component using THC's Flair-It Insert PLS fittings.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

Clamps[1]
 
POM
 
Pexlock*
 
ASTM F877
3/8" 28760   1/2" 28761   3/4" 28762  

* These products are also represented by the trade name THC.
[1] Clamps are Certified as a system component using THC's Flair-It Insert PLS fittings.



 
The Boys, LLC dba SupplyHouse.com 
130 Spagnoli Road
Melville, NY 11747 
United States 
631-393-2855

Facility : # 1 China

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Press Fittings (PF15)% § +++ [G]
 
MLTPL
 
Bluefin
 
ASTM F877
1/8" - 2 1/2"

% Product Listed for use with R, Rifeng PEX tubing only.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

Crimp Fittings (PF5)* §
 
Brass C37700
 
Bluefin
 
ASTM F877
3/8" - 2 1/2"  

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Crimp Fittings (PF5)* §
 
DZR Brass
 
Bluefin
 
ASTM F877
3/8" - 2 1/2"  

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Fittings§ [1] [2]
 
MLTPL
 
Bluefin
 
ASTM F877

Stainless Steel Manifolds
FN16-1F-3/4*n  

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Main inlet/outlet size: 1"
    Sub inlet/outlet size: 3/4"
[2] n is the quantity of subway

Press Fittings (PF15)§ +++ [G]
 
MLTPL
 
Bluefin
 
ASTM F877
1/8" - 2 1/2"  

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
The Mosack Group, Inc. 
11210 Allen Station Drive
Mint Hill, NC 28227 
United States 
704-841-6167

Facility : # 1 China

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pinch Clamp
 
SS
 
TMG PEX
 
ASTM F877
PXPC3850PK
PXPC38100JR
PXPC3825PK
PXPC3810PK

Pinch Clamp
 
SS
 
TMG PEX
 
ASTM F877
PXPC150JR
PXPC110PK
PXPC15PK

Pinch Clamp
 
SS
 
TMG PEX
 
ASTM F877
PXPRO3410PK
PXPC3425PK
PXPC3410PK
CPXPC3450PK
CPXPC3410PK
PXPC34100JR
PXPC34100PK
PXPRO34100JR

Pinch Clamp
 
SS
 
TMG PEX
 
ASTM F877
PXPC5810PK
PXPC5825PK

Pinch Clamp
 
SS
 
TMG PEX
 
ASTM F877
PXPC12100PK
PXPC12100JR
CPXPC1210PK
PXPC1210PK
PXPRO12100JR
PXPC1225PK
CPXPC1250PK
PXPRO1210PK


Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

Pinch Clamp
 
SS
 
TMG PEX
 
ASTM F877
PXPC3810PK

Pinch Clamp
 
SS
 
TMG PEX
 
ASTM F877
PXPC150JR
PXPC110PK
PXPC15PK

Pinch Clamp
 
SS
 
TMG PEX
 
ASTM F877
PXPRO34100JR
PXPRO3410PK
PXPC3425PK
PXPC3410PK
CPXPC3450PK
CPXPC3410PK
PXPC34100JR
PXPC34100PK

Pinch Clamp
 
SS
 
TMG PEX
 
ASTM F877
PXPC5825PK
PXPC5810PK

Pinch Clamp
 
SS
 
TMG PEX
 
ASTM F877
PXPC1225PK
PXPC12100PK
CPXPC1250PK
CPXPC1210PK
PXPC12100JR
PXPRO1210PK
PXPRO12100JR
PXPC1210PK



 
The Mosack Group, Inc. 
11210 Allen Station Drive
Mint Hill, NC 28227 
United States 
704-841-6167
Visit this company's website

Facility : # 1 China

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings@ ¢ § +++ [G]
 
Brass
 
C-PEX
 
ASTM F877

Transition Straight Adapter
EPXCPVC12 1/2" PEX x 1/2" CPVC Adapter   EPXCPVC34 3/4" PEX x 3/4" CPVC Adapter  

Union
L125206 1" F1960 Union   L976006 1/2" F1960 Union   L976106 3/4" F1960 Union  

@ Product also meets the requirements of ASTM F877.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings@ ¢ § +++ [G]
 
Brass
 
PURELINK
 
ASTM F877

Transition Straight Adapter
EPXCPVC12 1/2" PEX x 1/2" CPVC Adapter   EPXCPVC34 3/4" PEX x 3/4" CPVC Adapter  

Union
L125206 1" F1960 Union   L976006 1/2" F1960 Union   L976106 3/4" F1960 Union  

@ Product also meets the requirements of ASTM F877.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings@ ¢ § +++ [G]
 
Brass
 
PUREPEX
 
ASTM F877

Transition Straight Adapter
EPXCPVC12 1/2" PEX x 1/2" CPVC Adapter   EPXCPVC34 3/4" PEX x 3/4" CPVC Adapter  

Union
L125206 1" F1960 Union   L976006 1/2" F1960 Union   L976106 3/4" F1960 Union  

@ Product also meets the requirements of ASTM F877.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings@ ¢ § +++ [G]
 
Brass
 
TMG
 
ASTM F877

Transition Straight Adapter
EPXCPVC12 1/2" PEX x 1/2" CPVC Adapter   EPXCPVC34 3/4" PEX x 3/4" CPVC Adapter  

Union
L125206 1" F1960 Union   L976006 1/2" F1960 Union   L976106 3/4" F1960 Union  

@ Product also meets the requirements of ASTM F877.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
The Mosack Group, Inc. 
11210 Allen Station Drive
Mint Hill, NC 28227 
United States 
888-229-2874 
704-659-6469
Visit this company's website

Facility : # 6 China

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings§ +++ [G]
 
PPSU
 
apollo PEX
 
ASTM F877

Plastic Adapter
PXPAM12   PXPAM1234   PXPAM34   PXPAM3412  
PXPAM3425JR  

Plastic PEX Coupling
APXPAC1250PK   APXPAC3450PK   CPXPAC1240PK   CPXPAC3440PK  
PXPAC12   PXPAC1220PK   PXPAC34   PXPAC3412  
PXPAC3420PK  

Plastic PEX Elbow
APXPAE1250PK   APXPAE3450PK   CPXPAE1250PK   CPXPAE3440PK  
PXPAE12   PXPAE1220PK   PXPAE34   PXPAE3420PK  

Plastic PEX Plug
APXPAP1250PK   APXPAP3450PK   PXPAP12   PXPAP34  

Plastic PEX Tee
APXPAT1250PK   APXPAT3450PK   CPXPAT1250PK   PXPA343412  
PXPA34341220PK   PXPAT12   PXPAT1220PK   PXPAT34  
PXPAT3420PK  

Plastic Swivel Adapter
PXPAF1234S   PXPAF3812S   PXPAFB1212S   PXPAFB3434S  

Plastic Swivel Elbow
PXPAFAE1212   PXPAFAE3434  

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Tribal Manufacturing, Inc. 
450 Leggitt Road
Marshall, MI 49068 
United States 
269-781-3901
Visit this company's website

Facility : Marshall, MI

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings! * + ¢ § +++ [G]
 
Brass
 
 
ASTM F877

Adapter (PEX x Female Sweat)
3/8" x 1/2" [F19E34]   1/2" x 1/2" [F19E44]   1/2" x 3/4" [F19E46]   3/4" x 1/2" [F19E64]  
3/4" x 3/4" [F19E66]   1" x 1" [F19E88]  

Adapter (PEX x PB)
3/8" x 3/8" [F18E33]   1/2" x 1/2" [F18E44]   3/4" X 3/4" [F18E66]   1" x 1" [F18E88]  

Adapter (PEX x PE)
3/4" x 3/4" (F120E66)   1" x 1" (F120E88)  

Adapter (PEX x Special Male Sweat)
1/2" x 1/2" [F33E44]  

Adapter (PEX x Stub)
3/8" x 1/2" [F03E34]   1/2" x 1/2" [F03E44]   1/2" x 3/4" [F03E46]   3/4" x 3/4" [F03E66]  

Adapter Assy (PEX x FPT Swivel)
3/4" x 3/4" [F24E66]  

Adapter Assy (PEX x Termination)
1/2" x 3/4" [F24E46]  

Adapters (PEX x FPT)
3/8" x 1/8" [F09E31]   3/8" x 1/2" [F09E34]   1/2" x 1/8" [F09E41]   1/2" x 1/2" [F09E44]  
1/2" x 3/4" [F09E46]   3/4" x 1/2" [F09E64]   3/4" x 3/4" [F09E66]   3/4" x 1" [F09E68]  
1" x 1" [F09E88]  

Adapters (PEX x M Sweat)
3/8" x 3/8" [F02E33]   3/8" x 1/2" [F02E34]   1/2" x 3/8" [F02E43]   1/2" x 1/2" [F02E44]  
1/2" x 3/4" [F02E46]   3/4" x 1/2" [F02E64]   3/4" x 3/4" [F02E66]   1" x 1" [F02E88]  
1 1/4" x 1" [F02E108]   1/4" x 1 1/4" [F02E1010]  

Adapters (PEX x MPT)
3/8" x 3/8" [F10E33]   3/8" x 1/2" [F10E34]   1/2" x 3/8" (F10E43)   1/2" x 1/2" [F10E44]  
1/2" x 3/4" [F10E46]   3/4" x 1/2" [F10E64]   3/4" x 3/4" [F10E66]   3/4" x 1" [F10E68]  
1" x 3/4" [F10E86]   1" x 1" [F10E88]  

Assembly (PEX x FPT - straight)
3/8" x 1/2" [F04E34]   1/2" X 1/2" [F04E44]  

Connectors (PEX x PEX)
3/8" x 3/8" [F01E33]   1/2" x 3/8" [F01E43]   1/2" x 1/2" [F01E44]   3/4" x 1/2" [F01E64]  
3/4" x 3/4" [F01E66]   1" x 1/2" [F01E84]   1" x 3/4" [F01E86]   1" x 1" [F01E88]  

Elbow (MPT x MPT)
3/8" x 1/2" [F51E34]   1/2" x 1/2" [F51E44]  

Elbow (PEX x MPT)
3/8" x 1/4" [F22E32]   3/8" x 3/8" [F22E33]   1/2" x 3/8" [F22E43]   1/2" x 1/2" [F22E44]  
3/4" X 1/2" (F22E64)  

Elbow (PEX x PEX)
3/8" x 3/8" [F07E33]   3/8" x 1/2" [F07E34]   1/2" x 1/2" [F07E44]   3/4" x 1/2" [F07E64]  
3/4" x 3/4" [F07E66]   1" x 1/2" [F07E84]   1" x 1" [F07E88]  

Elbow Adapter (PEX X FNPT)
1/2" X 1/2" (F28E44)   1/2" X 3/4" (F28E46)   3/4" X 1/2" (F28E64)   3/4" x 3/4" [F28E66]  

Elbow Drop Ear (FPT)
1/2" x 3/8" (F326E43B)   1/2" x 1/2" (F136E44B)   1/2" x 1/2" (F26E44)   1/2" x 1/2" (F326E44)  
1/2" x 1/2" (F326E44BS1)   3/4" x 1/2" (F26E64)   3/4" x 3/4" (F26E66)   3/4" x 3/4 " (F326E66)  

Male Pipe Elbow Adapter (PEX x MP)
3/8" x 1/2" [F22E34]   1/2" x 3/4" [F22E46]   3/4" x 3/4" [F22E66]  

Nipple (Female Flare Swivel)
3/8" X 3/8" [F11E33]   1/2" X 1/2" [F11E44]  

Plug (PEX)
3/8" [F08E3]   1/2" [F08E4]   3/4" [F08E6]   1" [F08E8]  
1 1/2" x 1 1/2" x 1/2" [F06E12124]   1 1/2" x 1 1/2" x 3/4" [F06E12126]   1 1/2" x 1 1/2" x 1" [F06E12128]  

Swivel Assembly (PEX x Female Flare Swivel)
3/8" x 3/8" [F12E33]   1/2" x 1/2" [F12E44]  

Tee (PEX x PEX x PEX)
3/8" x 3/8" x 3/8" [F06E333]   3/8" x 3/8" x 1/2" [F06E334]   1/2" x 3/8" x 3/8" [F06E433]   1/2" x 3/8" x 1/2" [F06E434]  
1/2" x 1/2" x 3/8" [F06E443]   1/2" x 1/2" x 1/2" [F06E444]   1/2" x 1/2" x 3/4" [F06E446]   3/4" x 1/2" x 1/2" [F06E644]  
3/4" x 1/2" x 3/4" [F06E646]   3/4" x 3/4" x 3/8" [F06E663]   3/4" x 3/4" x 1/2" [F06E664]   3/4" x 3/4" x 3/4" [F06E666]  
1" x 1/2" x 3/4" [F06E846]   1" x 1/2" x 1" [F06E848]   1" x 3/4" x 1/2" [F06E864]   1" x 3/4" x 3/4" [F06E866]  
1" x 3/4" x 1" [F06E868]   1" x 1" x 3/4" [F06E886]   1" x 1" x 1" [F06E888]  

Tee Adapter (PEX x PEX x MP)
1/2" x 1/2" x 1/2" [F57E444]  

Tee Adapter (PEX x PEX x PEX)
3/4" x 3/4" x 1" [F06E668]   1" x 1" x 3/4" [F06E884]  

Termination Elbow (PEX x Termination)
3/8" x 1/2" [F20E34]   1/2" x 1/2" [F20E44]  

Termination Elbow Assy (PEX x Termination)
3/8" x 1/2" [F21E34]   1/2" x 1/2" [F21E44]  

! All products may have an optional V and/or B at the end of the part number, or could
  have a M/P and quantity for packaging. 
* Accepted by NSF for use in residential and commercial construction,
  including manufactured housing.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings! ¢ § +++ [G]
 
MLTPL
 
 
ASTM F877

Branch Reducing Tees
3/4" x 3/4" x 1/2" [F208E664][260627]   1" x 1" x 1/2" [F208E884][260727]   1" x 1" x 3/4" [F208E886][260707]   1 1/4" x 1 1/4" x 3/4" [F208E10106][235627]  
1 1/4" x 1 1/4" x 1" [F208E10108][235617]   1 1/2" x 1 1/2" x 1" [F208E12128][235827]   1 1/2" x 1 1/2" x 1 1/4" [F208E121210][235817]   2" x 2" x 1" [F208E16168][236037]  
2" x 2" x 1 1/4" [F208E161610][236027]   2" x 2" x 1 1/2" [F208E161612][236017]  

Branch and Run Red Tees
3/4" x 1/2" x 1/2" [F208E644][260637]   1" x 3/4" x 3/4" [F208E866][260697]   1 1/4" x 3/4" x 1" [F208E1068][235677]   1 1/4" x 1" x 1" [F208E1088][235657]  
1 1/2" x 3/4" x 1" [F208E1268][235887]   1 1/2" x 1" x 1" [F208E1288][235877]   1 1/2" x 1 1/4" x 1" [F208E12108][235867]   1 1/2" x 1 1/4" x 1 1/4" [F208E121010][235857]  
2" x 1 1/2" x 1" [F208E16128][236087]   2" x 1 1/2" x 1 1/4" [F208E161210][236077]   2" x 1 1/4" x 1 1/4" [F208E161010][236097]   2" x 1 1/2" x 1 1/2" [F208E161212][236067]  

Bullhead Tees
1/2" x 1/2" x 3/4" [F208E446][260857]   3/4" x 3/4" x 1" [F208E668][260897]  

Copper Adapters
1/2" x 3/8" F2080 C Female (Sweat) or 1/2" C Male (Street) [F97E43]   1/2" x 1/2" F2080 C Female (Sweat) [F98E44][260047]   5/8" x 1" F2080 C Male (Street) or 3/4" C Female (Sweat) [F97E58][243637]   3/4" x 1" F2080 C Female (Sweat) [F98E68][260807]  
3/4" x 3/4" F2080 C Male (Street) or 1/2" C Female (Sweat) [F97E66][260807]   3/4" x 1" F2080 C Male (Street) or 3/4" C Female (Sweat) [F97E68][260837]   1" x 1" F2080 C Male (Street) or 3/4" C Female (Sweat) [F97E88][260417]   1" x 1 1/4" F2080 C Male (Street) or 1" C Female (Sweat) [F97E810][260947]  
1 1/4" x 1 1/4" F2080 C Male (Street) or 1" C Female (Sweat) [F97E1010][235567]   1 ¼" x 1 ½" F2080 C Male (Street) or 1 ¼" C Female (Sweat) [F97E1012][ 235577]   1 ½" x 1 ½" F2080 C Male (Street) or 1 ½" C Female (Sweat) [F97E1212][235767]   1 1/2" x 2" F2080 C Male (Street) or 1 1/2" C Female (Sweat) [F97E1216][235777]  
2" x 2" F2080 C Male (Street) or 1 1/2" C Female (Sweat) [F97E1616][235967]   2" x 2 1/2" F2080 C Male (Street) or 2" C Female (Sweat) [F97E1620][235977]  

Couplings
3/8" x 3/8" [F95B33]E   1/2" x 1/2" [F95E44][260097]   3/4" x 3/4" [F95E66][260317]   5/8" X 5/8" [F95E55][243627]  
1" x 1" [F95E88][243627]   1 1/4" x 1 1/4" [F95E1010][235527]   1 1/2" x 1 1/2" [F95E1212][235727]   2" x 2" [F95E1616][235927]  

Drop Ear Elbow - ELOC Dual MPT/Copper
1/2" x 1/2" MPT or 1/2" C Female [F210E44][260737]   3/4" x 3/4" MPT or 1/2" C Female [F210E66][260747]  

Drop Ear Elbow - ELOC to FPT
1/2" x 1/2" [F212E44][260667]   3/4" x 3/4" [F212E66][260777]   1" x 1" [F212E88][260787]  

Dual MPT/Copper Adapters
3/8" F2080 x 1/2" MPT or 1/2" C Female (Sweat) [F96E34][243537]   1/2" F2080 x 1/2" MPT or 1/2" C Female (Sweat) [F96E44][260237]   1/2" F2080 x 1/2" MPT or 1/2" C Female (Sweat) [F96E54][243647]   3/4" F2080 x 3/4" MPT or 1/2" C Female (Sweat) [F96E66]260327]  
1" F2080 x 1" MPT or 3/4" C Female (Sweat) [F96E88][260437]   1 1/4" F2080 x 1 1/4" MPT or 1" C Female (Sweat) [F96E1010][235557]   1 1/2" F2080 x 1 1/2" MPT or 1 1/4" C Female (Sweat) [F96E1212][235757]   2" F2080 x 2" MPT or 1 1/2" C Female (Sweat) [F96E1616][235957]  

Elbow - ELOC to Copper (Male or Female)
1/2" x 1/2" C Male or 3/8" C Female [F215E44][260537]   1/2" x 3/4" C Female [F215E46][260757]   1/2" x 3/4" C Male or 1/2" C Female [F215E46][260757]   3/4" x 1" C Male or 3/4" C Female [F215E68][260767]  
3/4" x 3/4" C Male or 1/2" C Female [F215E66][260817]  

Elbows
1/2" x 1/2" [F209E44][260657]   3/4" x 3/4" [F209E66][260677]   1" x 1" [F209E88][260717]   1 1/4" x 1 1/4" [F209E10][235597]  
1 1/2" x 1 1/2" [F209E12][235797]   2" x 2" [F209E16][235997]  

Female Adapters
1/2" F2080 x 1/2" FPT [F99E44][260287]   3/4" F2080 x 3/4" FPT [F99E66][260387]   1" F2080 x 1" FPT [F99E88][260387]  

Female Swivel Adapters
1/2" F2080 x 1/2" NPS Female Swivel [F94E44][260097]   3/4" F2080 x 3/4" NPS Female Swivel [F94E66][260587]  

Plugs
1/2" [F103E4][260087]   3/4" [F103E6][260397]   1" [F103E8][260497]   1 1/4" [F103E10][235267]  

Reducing Couplings
3/4" x 1/2" [F95E64][260247]   1" x 3/4" [F95E86][260447]   1 1/4" x 1" [F95E108][235517]   1 1/2" x 1" [F95E128][235737]  
1 1/2" x 1 1/4" [F95E1210][235717]   2" x 1" [F95E168][235947]   2" x 1 1/4" [F95E1610][235937]   2" x 1 1/2" [F95E1612][235917]  

Run Reducing Tees
1 1/4" x 1" x 1 1/4" [F208E10810][235637]   1" x 3/4" x 1" [F208E868][260687]   2" x 1 1/4" x 2" [F208E161016][236057]   1 1/2" x 1" x 1 1/2" [F208E12812][235847]  
2" x 1/2" x 2" [F208E161216][260647]   3/4" x 1/2" x 3/4" [F208E646][260647]   1 1/2" x 1 1/4" x 1 1/2" [F208E121012][235837]  

Straight Tees
1/2" x 1/2" x 1/2" [F208E444][260607]   3/4" x 3/4" x 3/4" [F208E666][260617]   1" x 1" x 1" [F208E888][260977]   1 1/4" x 1 1/4" x 1 1/4" [F208E101010] [235607]  
1 1/2" x 1 1/2" x 1 1/2" [235807][F208E121212]   2" x 2" x 2" [F208E161616] [ 236007]  

! All products may have an optional V and/or B at the end of the part number, or could
  have a M/P and quantity for packaging. 
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++
 
Brass
 
SWIVEL DROP EAR
 
ASTM F877

Elbow
1/2" x 1/2" [F82E44]  

* Accepted by NSF for use in residential and commercial construction,
  including manufactured housing.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings! * ¢ § +++ [G]
 
Brass
 
Viega PureFlow®
 
ASTM F877

Adapter (PEX x Female Sweat)
1/2" x 1/2" [46635]   3/4" x 3/4" [46645]  

Adapter (PEX x PB)
3/8" x 3/8" [46620]   1/2" x 1/2" [46630]   3/4" X 3/4" [46641]   1" x 1" [46650]  

Adapter (PEX x PE)
3/4" x 3/4" (46145)   1" x 1" (46156)  

Adapters (PEX x FPT)
3/4" x 1" [46345]   3/8" x 1/2" [46323]   1/2" x 1/2" [46333]   1/2" x 3/4" [46334]  
3/4" x 3/4" [46344]   3/4" x 1" [46345]  

Adapters (PEX x M Sweat)
3/8" x 3/8" [46621]   3/8" x 1/2" [46622]   1/2" x 3/8" [46631]   1/2" x 1/2" [46633]  
3/4" x 3/4" [46644]   1" x 1" [46654]  

Adapters (PEX x MPT)
3/8" x 1/2" [46302]   1/2" x 1/2" [46321]   1/2" x 3/4" [46324]   3/4" x 1/2" [46342]  
3/4" x 3/4" [46340]   1" x 3/4" [46361]   1" x 1" [46366]  

Connectors (PEX x PEX)
3/8" x 3/8" [46422]   1/2" x 3/8" [46432]   1/2" x 1/2" [46434]   3/4" x 1/2" [46441]  
3/4" x 3/4" [46444]   1" x 3/4" [46454]   1" x 1" [46455]  

Elbow (PEX x MPT)
3/8" x 3/8" [46822]   1/2" x 3/8" [46232]   1/2" x 1/2" [46821]  

Elbow (PEX x PEX)
3/8" x 3/8" [46922]   1/2" x 1/2" [46933]   3/4" x 1/2" [46243]   3/4" x 3/4" [46944]  
1" x 1" [46955]  

Elbow Drop Ear (FPT)
1/2" x 1/2" (46233)   3/4" x 3/4" (46244)  

Female Pipe Straight Adapter (PEX x FP)
1" x 1" [46355]  

Male Pipe Elbow Adapter (PEX x MP)
3/4" x 3/4" [46245]  

Male Pipe Straight Adapter (PEX x MP)
3/4" x 1" [46446]  

Tee (PEX x PEX x PEX)
3/8" x 3/8" x 3/8" [46500]   1/2" x 1/2" x 1/2" [46520]   1/2" x 1/2" x 3/4" [46524]   3/4" x 1/2" x 1/2" [46433]  
3/4" x 1/2" x 3/4" [46435]   3/4" x 3/4" x 1/2" [46443]   3/4" x 3/4" x 3/4" [46540]   1" x 3/4" x 3/4" [46544]  
1" x 3/4" x 1" [46545]   1" x 1" x 3/4" [46554]   1" x 1" x 1" [46560]  

Tee Adapter (PEX x PEX x PEX)
3/4" x 3/4" x 1" [46445]   1" x 1" x 3/4" [46553]  

! All products may have an optional V and/or B at the end of the part number, or could
  have a M/P and quantity for packaging. 
* Accepted by NSF for use in residential and commercial construction,
  including manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

*** These components require additional processing in order to be used in a
    piping system.  The use of these components in NSF Certified fittings
    require written authorization from NSF.

Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

Fittings! ^ ¢ § ¿
 
MLTPL
 
 
ASTM F877

Copper Adapters
1/2" x 3/8" F2080 C Female (Sweat) or 1/2" C Male (Street) (260017) (F97B44)   1/2" x 1/2" F2080 C Female (Sweat) (260047) (F98B44)   5/8" x 1" F2080 C Male (Street) or 3/4" C Female (Sweat) (243637) (F97B58)   3/4" x 1" F2080 C Female (Sweat) (260807) (F98B68)  
3/4" x 3/4" F2080 C Male (Street) or 1/2" C Female (Sweat) (260827) (F97B66)   3/4" x 1" F2080 C Male (Street) or 3/4" C Female (Sweat) (260837) (F97B68)   1" x 1" F2080 C Male (Street) or 3/4" C Female (Sweat) (260417) (F97B88)   1" x 1 1/4" F2080 C Male (Street) or 1" C Female (Sweat) (260947) (F97B810)  
1 1/4" x 1 1/4" F2080 C Male (Street) or 1" C Female (Sweat) (235567)(F97B1010)   1 ¼" x 1 ½" F2080 C Male (Street) or 1 ¼" C Female (Sweat)(235577)(F97B1012)   1 ¼" x 1 ½" F2080 C Male (Street) or 1 ¼" C Female (Sweat) (235767)(F97B1212)   1 1/2" x 2" F2080 C Male (Street) or 1 1/2" C Female (Sweat) (235777)(F97B1216)  
2" x 2" F2080 C Male (Street) or 1 1/2" C Female (Sweat) (235967) (F97B1616)   2" x 2 1/2" F2080 C Male (Street) or 2" C Female (Sweat) (235977) (F97B1620)  

Couplings
3/8" x 3/8" (243517) (F95B33)   1/2" x 1/2" (260227) (F95B44)   3/4" x 3/4" (260317) (F95B66)   5/8" X 5/8" (243627) (F95B55)  
1" x 1" (260427) (F95B88)   1 1/4" x 1 1/4" (235527) (F95B1010)   1 1/2" x 1 1/2" (235727) (F95B1212)   2" x 2" (235927) (F95B1616)  

Dual MPT/Copper Adapters
3/8" F2080 x 1/2" MPT or 1/2" C Female (Sweat) (243537)(F96B34)   1/2" F2080 x 1/2" MPT or 1/2" C Female (Sweat)(260237)(F95B44)   5/8" F2080 x 1/2" MPT or 1/2" C Female (Sweat)(243647)(F96B54)   3/4" F2080 x 3/4" MPT or 1/2" C Female (Sweat)(260327)(F96B66)  
1" F2080 x 1" MPT or 3/4" C Female (Sweat)(260437)(F96B88)   1 1/4" F2080 x 1 1/4" MPT or 1" C Female (Sweat)(235557)(F96B1010)   1 1/2" F2080 x 1 1/2" MPT or 1 1/4" C Female (Sweat) (235757) (F96B1212)   2" F2080 x 2" MPT or 1 1/2" C Female (Sweat) (235957) (F96B1616)  

Female Adapters
1/2" F2080 x 1/2" FPT (260287) (F99B44)   3/4" F2080 x 3/4" FPT (260387) (F99B66)   1" F2080 x 1" FPT (260487) (F99B88)  

Female Swivel Adapters
1/2" F2080 x 1/2" NPS Female Swivel (260097) (F94B44)   3/4" F2080 x 3/4" NPS Female Swivel (260587) (F94B66)  

Plugs
1/2" (260087)(F103B4)   3/4" (260397) (F103B6)   1" (260497) (F103B8)   1 1/4" (235267) (F103B10)  

Reducing Couplings
3/4" x 1/2" (260247) (F95B64)   1" x 3/4" (260447) (F95B86)   1 1/4" x 1" (235517) (F95B108)   1 1/2" x 1" (235737) (F95B128)  
1 1/2" x 1 1/4" (235717) (F95B1210)   2" x 1" (235947) (F95B168)   2" x 1 1/4" (235937) (F95B1610)   2" x 1 1/2" (235917) (F95B1612)  

! Rehau EVERLOC® and the Tribal logo are Certified alternate trade names of each other. 
  Fittings have a Radiant Floor Heating (rfh) end use.
^ The B can be substituted with an E in the model designations.  Only E model designations
  comply with Annex G Listed under Potable Water.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
¿ These products can also be represented with the trade name: Tribal logo.


Facility : Chesnee, SC

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings! * + ¢ § +++ [G]
 
Brass
 
 
ASTM F877

Adapter (PEX x Female Sweat)
1/2" x 1/2" [F19E44]   1/2" x 3/4" [F19E46]   3/4" x 3/4" [F19E66]   1" x 1" [F19E88]  

Adapter Assy (PEX x FPT Swivel)
3/4" x 3/4" [F24E66]  

Adapter Assy (PEX x Termination)
1/2" x 3/4" [F24E46]  

Adapters (PEX x FPT)
1/2" x 1/2" [F09E44]   1/2" x 3/4" [F09E46]   3/4" x 1/2" [F09E64]   3/4" x 3/4" [F09E66]  
3/4" x 1" [F09E68]   1" x 1" [F09E88]  

Adapters (PEX x M Sweat)
1/2" x 1/2" [F02E44]   3/4" x 3/4" [F02E66]  

Adapters (PEX x MPT)
3/8" x 1/2" [F10E34]   1/2" x 3/8" [F10E43]   1/2" x 1/2" [F10E44]   1/2" x 3/4" [F10E46]  
3/4" x 1/2" [F10E64]   3/4" x 3/4" [F10E66]   3/4" x 1" [F10E68]   1" x 3/4" [F10E86]  
1" x 1" [F10E88]  

Assembly (PEX x FPT - straight)
3/8" x 1/2" [F04E34]  

Connectors (PEX x PEX)
3/8" x 3/8" [F01E33]   1/2" x 3/8" [F01E43]   1/2" x 1/2" [F01E44]   3/4" x 1/2" [F01E64]  
3/4" x 3/4" [F01E66]   1" x 3/4" [F01E86]   1" x 1" [F01E88]  

Elbow (PEX x MPT)
1/2" x 3/8" [F22E43]   1/2" x 1/2" [F22E44]   1/2" x 3/4" [F22E46]   3/4" X 1/2" [F22E64]  
3/4" x 3/4" [F22E66]  

Elbow (PEX x PEX)
3/8" x 3/8" [F07E33]   1/2" x 1/2" [F07E44]   3/4" x 1/2" [F07E64]   3/4" x 3/4" [F07E66]  
1" x 1" [F07E88]  

Elbow Adapter (PEX X FNPT)
1/2" X 1/2" [F28E44]   1/2" X 3/4" [F28E46]   3/4" X 1/2" [F28E64]   3/4" x 3/4" [F28E66]  

Elbow Drop Ear (FPT)
1/2" x 1/2" [F26E44]   3/4" x 1/2" [F26E64]  

Plug (PEX)
1/2" [F08E4]   3/4" [F08E6]   1" [F08E8]  

Tee (PEX x PEX x PEX)
3/8" x 3/8" x 3/8" [F06E333]   1/2" x 1/2" x 1/2" [F06E444]   1/2" x 1/2" x 3/4" [F06E446]   3/4" x 1/2" x 1/2" [F06E644]  
3/4" x 1/2" x 3/4" [F06E646]   3/4" x 3/4" x 1/2" [F06E664]   3/4" x 3/4" x 3/4" [F06E666]   1" x 3/4" x 3/4" [F06E866]  
1" x 1" x 1/2" [F06E868]   1" x 1" x 3/4" [F06E886]   1" x 1" x 1" [F06E888]  

Tee Adapter (PEX x PEX x PEX)
3/4" x 3/4" x 1" [F06E668]   1" x 1" x 3/4" [F06E884]  

Termination Elbow Assy (PEX x Termination)
1/2" x 1/2" [F21E44]  

! All products may have an optional V and/or B at the end of the part number, or could
  have a M/P and quantity for packaging. 
* Accepted by NSF for use in residential and commercial construction,  including
  manufactured housing.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Uponor 
5925 148th Street West
Apple Valley, MN 55124 
United States 
800-321-4739 
952-891-2000
Visit this company's website

Facility : # 1 China

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Valves¢ § +++ [1] [G]
 
MLTPL
 
Uponor Logo
 
ASTM F877

ProPEX LF Brass Commercial Ball Valve (full port)
1/2" PEX x 1/2" PEX (LFC4825050SS)   3/4" PEX x 3/4" PEX (LFC4827575SS)   1" PEX x 1" PEX (LFC4821010SS)   1 1/4" PEX x 1 1/4" PEX (LFC4821313SS)  
1 1/2" PEX x 1 1/2" PEX (LFC4821515SS)   2" PEX x 2" PEX (LFC4822020SS)  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] Replacement Handles are available for these valves:
    LFC5615075 (Replacement Handle for 1/2" and 3/4" Commercial Ball Valves)
    LFC5615075H (Replacement Handle for 1/2" and 3/4" Commercial Ball Valves)
    LFC5611013 (Replacement Handle for 1" and 1-1/4" Commercial Ball Valves)
    LFC5611520 (Replacement Handle for 1-1/2" and 2" Commercial Ball Valves)
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Valves¢ § +++ [G]
 
MLTPL
 
Uponor Logo
 
ASTM F877

ProPEX LF Brass Ball Valve (full port)
1/2" PEX x 1/2" PEX (LFR4815050)   3/4" PEX x 3/4" PEX (LFR4817575)   1" PEX x 1" PEX (LFR4811010)  

ProPEX LF Brass Stop & Drain Ball Valve-full port
1/2" PEX x 1/2" PEX (LFD4815050)   3/4" PEX x 3/4" PEX (LFD4817575)   1" PEX x 1" PEX (LFD4811010)  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : Frankfort, IL

Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

Fittings¢
 
Brass
 
Uponor Logo
 
ASTM F877

QS-Style Assembly, Commercial Manifold-R25 Thread
5/8" (A4050625)   3/4" (A4050750)  

QS-style Compression Fitting Assembly, R20 thread
5/8" (A4020625)   5/16" (A4020313)   3/8" (A4020375)   1/2" (A4020500)  

QS-style Compression Fitting Assembly, R25 thread
5/8" (A4030625)   3/4" (A4020750)  

Repair Coupling
5/16" (A4010313)  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.


Facility : Apple Valley, MN

Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

Pipe/Fittings Assembly¥ [5]
 
MLTPL
 
Uponor Logo
 
ASTM F877

Radiant Rollout™ Mat
1/2"   5/8"  

¥ Product is Certified to the Uniform Mechanical Code™. Installation in accordance with
  the manufacturer's instructions and the requirements of the latest edition of the
  Uniform Mechanical Code™.
[5] Product may or may not bear the U.M.Code mark.


Facility : Circle Pines, MN

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Manifolds! ¢ § +++ [G]
 
SP
 
Uponor Logo
 
ASTM F877

1 x 3/4" F/T Manifold with ProPEX Outlets
4 Outlet (1/2") (Q2241057)   6 Outlet (1/2") (Q2261057)  

1" EP Branch Elbow Commercial Multi-port Tee
10 outlets (1/2") (Q2101000)  

1" EP Branch Multi-port Tee
7 Outlets with mounting clips (Q2271051)   8 Outlets with mounting clips (Q2281051)   10 outlets (1/2") with mounting clips (Q2101051)   12 outlets (1/2") with mounting clips (Q2121051)  

1" Manifold with 1" ProPEX End x ProPEX Outlet
6 Outlets (1/2") (Q2261050)  

1" Manifold with two 1" ProPEX Ends x ProPEX Outle
6 Outlets (1/2") (Q2261051)  

3/4" Branch Manifold
3 Outlets (Q2237550)   4 Outlets (Q2247550)   6 Outlets (Q2267550)  

3/4" EP Branch Commercial Multi-Port Tee
7 outlets (1/2") (Q2277550)   8 outlets (1/2") (Q2287550)  

3/4" EP Branch Elbow Commercial Multi-port Tee
7 outlets (1/2") (Q2077550)   8 outlets (1/2") (Q2087550)  

3/4" EP Branch Multi-Port Tee
6 outlets (Q2267550)  

3/4" EP Branch Opposing Port Multi-Port Tee
3 Outlets (1/2") (Q2337550)   4 Outlets (1/2") (Q2347550)   8 Outlets (1/2") (Q2387550)  

3/4" Manifold-two 3/4" ProPEX EndsxProPEX Outlets
2 Outlets (1/2'') (Q2227557)   3 Outlets (1/2") (Q2237557)   4 Outlets (1/2") (Q2247557)  

3/4" x 3/4" EP F/T Multi-Port Elbow ProPEX
3 outlets (Q2235577)  

3/4" x 3/4" EP F/T Multi-Port Tee ProPEX
6 outlets (Q2267557)  

3/4" x 3/4" EP F/T Multi-Port Tee Q&E/ProPEX
4 outlets (Q2247557)  

3/4" x 3/4" ProPEX Flow through Manifold
6 Outlets (Q2267557)  

3/4"x3/4" EP F/T Roll-out Multi-Port Elbow ProPEX
4 outlets (Q2245577)  

3/4"x3/4" ProPEX Flow-Thru Opp Port Multi-Port Tee
3 Outlets (1/2") (Q2337557)   4 Outlets (1/2") (Q2347557)   6 Outlets (1/2") (Q2367557)  

3/4"x3/4"x3/4" Rollout Multi-Port Vert Tee ProPEX
3 outlets (Q2237757)   4 outlets (Q2247757)  

3/4"x3/4x 3/4" Rollout Multi-Port Horiz Tee ProPEX
4 outlets (Q2247577)  

EP Branch Multi-Port Tee, 4 outlets (1/2")
1" PEX (Q2241050)  

EP Branch Multi-port Tee, 3 (3/4") outlets
1 1/4" PEX (Q2231375)  

EP Flow-through Multi-port Tee, 3 (1") outlets
2" PEX x 2" PEX (Q2232102)  

EP Flow-through Multi-port Tee, 3 (3/4") outlets
1 1/4" x 1 1/4" PEX (Q2231373)  

EP Flow-through Multi-port Tee, 3 outlets (1/2")
1" PEX x 3/4" PEX (Q2231057)  

EP Flow-through Multi-port Tee, 4 outlets (1/2")
1" PEX x 1" PEX (Q2241051)  

! Product may or may not bear the NSF U.P. Code marking.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : Lakeville, MN

Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

Pipe/Fittings Assembly¥ [1]
 
MLTPL
 
Uponor Logo
 
ASTM F877

Radiant Rollout™ Mat
1/2"   5/8"  

¥ Product is Certified to the Uniform Mechanical Code™. Installation in accordance with
  the manufacturer's instructions and the requirements of the latest edition of the
  Uniform Mechanical Code™.
[1] Product may or may not bear the U.M.Code mark.


Facility : Hartsville, SC

Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

Fittings¢ ¥ [1]
 
Brass
 
Uponor Logo
 
ASTM F877

Brass Manifold Adapter
R32 x 1" Adapter or 1 1/4" Fitting Adapter (A4133210)  

Threaded Brass Manifold Bushing
R32 Male x 1" Female NPT (A2123210)  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
¥ Product is Certified to the Uniform Mechanical Code™. Installation in accordance with
  the manufacturer's instructions and the requirements of the latest edition of the
  Uniform Mechanical Code™.
[1] Certified for use with Uponor manifolds only.


Facility : Kenosha, WI

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Manifolds! ¢ § +++ [G]
 
SP
 
Uponor Logo (U/W)
 
ASTM F877
EP Flow-through Multi-port Tee, 3 outlets, 1" x 3/4" ProPEX (Q2231057)   EP Flow-through Multi-port Tee, 3 outlets, 3/4" x 3/4" ProPEX (Q2237557)   Flow-through Multi-port Tee, 4 outlets, 1" x 1" ProPEX (Q2241051)   1 1/4" EP Branch Multi-port Tee, 3 (3/4") outlets (Q2231375)  
1" EP Branch Multi-port Tee, 4 outlets (Q2241050)   EP Flow-through Multi-port Tee, 2 outlets, 3/4" x 3/4" ProPEX (Q2227557)   EP Flow-through Multi-port Tee, 3 (3/4") outlets, 1 1/4"x1 1/4" ProPEX(Q2231373)  

! Product may or may not bear the NSF U.P. Code marking.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.